Kerala State IT Infrastructure Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 5,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of Community Skill Park For Asap At Cheriya Kalavoor, Alappuzha District.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_KSITI_299888_1Bid Award Id
ViewTender No
KSITIL/ASAP/2019-20/13Tender Authority
Kerala State IT Infrastructure Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
od91813/2019_2020 : Extra for additional lead upto 1km
100
-
-
... More
od91815/2019_2020 : Disposal of the rubbish and waste material by mechanical transport upto a distance of 5 km.;
250
-
-
... More
2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
335.636
-
-
... More
od91823/2019_2020 : Supplying and filling in plinth with stone dust(quarry dust) under floors, including watering, ramming, consolidating and dressing complete.;
240.142
-
-
... More
50.2.25.1 : Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
240.142
-
-
... More
2.34.1 : Supplying chemical emulsion in sealed containers including delivery as specified.Chlorpyriphos / Lindane emulsifiable concentrate of 20%
592.1
-
-
... More
2.35.3.1 : Diluting and injecting chemical emulsion for POST -CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion):Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
1118.783
-
-
... More
4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
154.452
-
-
... More
4.2.2 : Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:11/2:3 (1 cement : 11/2 coarse sand :3 graded stone aggregate 20 mm nominal size)
28.853
-
-
... More
4.17 : Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.
216.463
-
-
... More
4.11 : Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
48.591
-
-
... More
4.13 : Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
50.991
-
-
... More
5.37.1 : Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in -charge. Note:- Cement content considered in this item is @330 kg/cum. Excess /less cement used as per design mix is payable/recoverable separately.All wiork upto plinth level
368.963
-
-
... More
5.37.2 : Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in -charge. Note:- Cement content considered in this item is @330 kg/cum. Excess /less cement used as per design mix is payable/recoverable separately.All work above plinth level upto floor V level
464.071
-
-
... More
5.34.1 : Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable/ recoverable separately.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum).
845
-
-
... More
5.34.2 : Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable/ recoverable separately.Providing M-35 grade concrete instead of M-25 grade BMC/RMC. (Note: Cement content considered in M-35 is @ 350 Kg/cum).
122.149
-
-
... More
5.35 : Add for using extra cement in the items of design mix over and above the specified cement content therein
2134.5
-
-
... More
5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
438.268
-
-
... More
5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
486.144
-
-
... More
5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
424.492
-
-
... More
5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
125.4
-
-
... More
5.9.7 : Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases)
246.717
-
-
... More
5.9.19 : Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges
177.516
-
-
... More
5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
1338.48
-
-
... More
5.9.13 : Centering and shuttering including strutting, etc. and removal of form for:Vertical and horizontal fins individually for forming box louvers band, facias and eaves boards
362.88
-
-
... More
5.9.16.1 : Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide
47.997
-
-
... More
od91864/2019_2020 : Supplying and providing telescopic prop 3 m for slab support
2838.667
-
-
... More
od91866/2019_2020 : Prefabricated structural steel work riveted, bolted or welded in built up sections, trusses,Built-Up / HR sections / Bracings and framed work including supply & fixing of anchor bolts & base plates,cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and epoxy painting 2 coatswith approved quality epoxy paint all complete. Also nessary frame work for vent openings 3 Nos (1.00x0.60 size) and claddings including mm deck sheet . The Steel Building is to be designed fabricated,supplied and errected through a Pre Engineering company such as Kirby /Zamil or equivalent company and the design shall be got approved from KSHB. The design shall be based on the attached plans& specifications pertaining to Pre Engineering steel buildings and design codes. ;
188375.32
-
-
... More
od91868/2019_2020 : Providing and fixing in position 12mm thick of Shalitex board at various joints such as isolation joints at wall edge and column junction and sealing with winsil neutral base sealant manufactured by GE silicon as per manufacturers requirements etc complete
920
-
-
... More
od91870/2019_2020 : Providing and fixingstud type shear connector mm dia thermomechanically fixed
620
-
-
... More
od91872/2019_2020 : Providing and fixing in position metal decking sheet (tata bluescope/inter arch roofing/raj mohan roofing mm thick)for supporting RC slab including edge trims cutting,trimming,fixing,leak proofing of joints etc complete.
2391
-
-
... More
5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
54926.452
-
-
... More
7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)
50.501
-
-
... More
od91875/2019_2020 : Random rubble masonry with available hard stone in site for foundation and plinth including;levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded;stone aggregate 20 mm nominal size) upto plinth level with :; Cement mortar 1:6 (1 cement : 6 coarse sand)
25.251
-
-
... More
6.47 : Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor Vlevel with RCC band at sill level and lintel level with approved block laying polymermodified adhesive mortar all complete as per direction of Engineer-in-Charge. (Thepayment of RCC band and reinforcement shall be made for seperately).
584.293
-
-
... More
6.4.2 : Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in:Cement mortar 1:6 (1 cement : 6 coarse sand)
31.417
-
-
... More
10.6.1 : Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover
50.4
-
-
... More
10.9 : Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer -in-Charges, (area of grill to be measured).
21
-
-
... More
10.26.1 : Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.M.S. tube
555.45
-
-
... More
od91880/2019_2020 : Providing of 35mm thick Factory made Pre-laminated ABS (Acrolynitrile Butadyne Styrene) Door;shutter consisting of all round Frame made out of water proof solid foam PVC bar of size 20x32mm;reinforced by 32x 32mm vertical made out of LVL (Laminated Veneer Lumber), core material of 32 mm;thick high density craft paper honeycomb board, sandwiched on both sides with pre-laminated ABS;sheet thickness of 1.5mm . The shutter should have PVC edge banding of size 0.45mm on the;vertical & bottom sides. The shutter to be fixed to pre-laminated FPVC (Foamed Polyvinyl Chloride);Door frame of the size 105x40mm with a wall thickness of 10mm made out of extruded rigid FPVC;profile, mitre joined with 6 Nos. of 50mm steel screw ,GI stiffners of roll formed "U" GI channel of size;29x9x1mm, 150mm long at each hinge point and frame reinforcement of roll formed "U" GI channel of;size 46x22x.06mm) should be provides. The frame should have a bottom tie rod of "U" GI chanel size;of 15x15x1mm . The shutter shall be fixed to the door frame using Buttefly hinges of SSS finish and;shall be provided with mortise lock with handles of Godrej or approved equivalent make. The door;frame shall be fixed to the wall by using 80mm long screws through the frame with the help of PVC;fasteners and covered with screw caps
8
-
-
... More
od91881/2019_2020 : Providing of 35mm thick Factory made Pre-laminated ABS (Acrolynitrile Butadyne Styrene) Door;shutter consisting of all round Frame made out of water proof solid foam PVC bar of size 20x32mm;reinforced by 32x 32mm vertical made out of LVL (Laminated Veneer Lumber), core material of 32 mm;thick high density craft paper honeycomb board, sandwiched on both sides with pre-laminated ABS;sheet thickness of 1.5mm . The shutter should have PVC edge banding of size 0.45mm on the;vertical & bottom sides. The shutter to be fixed to pre-laminated FPVC (Foamed Polyvinyl Chloride);Door frame of the size 105x40mm with a wall thickness of 10mm made out of extruded rigid FPVC;profile, mitre joined with 6 Nos. of 50mm steel screw ,GI stiffners of roll formed "U" GI channel of size;29x9x1mm, 150mm long at each hinge point and frame reinforcement of roll formed "U" GI channel of;size 46x22x.06mm) should be provides. The frame should have a bottom tie rod of "U" GI chanel size;of 15x15x1mm . The shutter shall be fixed to the door frame using Buttefly hinges of SSS finish and;shall be provided with mortise lock with handles of Godrej or approved equivalent make. The door;frame shall be fixed to the wall by using 80mm long screws through the frame with the help of PVC;fasteners and covered with screw caps.
11
-
-
... More
od91814/2019_2020 : Providing of 35mm thick Factory made Pre-laminated ABS (Acrolynitrile Butadyne Styrene) Door;shutter consisting of all round Frame made out of water proof solid foam PVC bar of size 20x32mm;reinforced by 32x 32mm vertical made out of LVL (Laminated Veneer Lumber), core material of 32 mm;thick high density craft paper honeycomb board, sandwiched on both sides with pre-laminated ABS;sheet thickness of 1.5mm . The shutter should have PVC edge banding of size 0.45mm on the;vertical & bottom sides. The shutter to be fixed to pre-laminated FPVC (Foamed Polyvinyl Chloride);Door frame of the size 105x40mm with a wall thickness of 10mm made out of extruded rigid FPVC;profile, mitre joined with 6 Nos. of 50mm steel screw ,GI stiffners of roll formed "U" GI channel of size;29x9x1mm, 150mm long at each hinge point and frame reinforcement of roll formed "U" GI channel of;size 46x22x.06mm) should be provides. The frame should have a bottom tie rod of "U" GI chanel size;of 15x15x1mm . The shutter shall be fixed to the door frame using Buttefly hinges of SSS finish and;shall be provided with mortise lock with handles of Godrej or approved equivalent make. The door;frame shall be fixed to the wall by using 80mm long screws through the frame with the help of PVC;fasteners and covered with screw caps.
31
-
-
... More
od91882/2019_2020 : Providing and fixing metal door frames and shutters made up of galvanized steel (base steel as per IS;513 of 0.8 mm thick for shutters & 1.2mm thick for frames, galvanized as per IS 277 with Zinc at 120GSM);powder coated with pure polyester powder upto 60-90 microns thick in standard RAL paint colour of client;choice. Outer frame section should be of 100 x 50 mm x 1.2 mm thick. Shutter section should be of 0.80;mm thick galvanized steel sheet pressed (roll formed) to provide a 46 mm thick fully flush, double skin;door shell with seam joints at stile edges. Honeycomb kraft paper resin bonded with macroplast UR 7221;glue should be used as infill to give the required rigidity and effective acoustic insulation. The door shutter;should be provided with aluminium tower bolts, ISI marked, anodized (anodic coating not less than grade;AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc.;complete 150x10 mm – 2 Nos. chromium plated brass 100 mm mortice latch and lock with 6 levers and a;pair of lever handles with necessary screws etc. complete (best make of approved quality) .The shutter is;to be fixed to the door frame using 100x75x3mm Double ball bearing SS hinges of SS 304 grade in SSS;finish The above frames are fixed to the concrete/masonry wall by means of MS Electroplated Anchor Bolt;with end caps. The gap between frame and masonary to be filled with silicon sealant.
3
-
-
... More
od91883/2019_2020 : Providing and fixing metal door frames and shutters made up 120 minute Fire Rating confirming to;IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-incharge;of galvanized steel (base steel as per IS 513) of 1 mm thick for shutters & 1.6mm thick for frames;galvanized as per IS 277 (with Zinc at 120 GSM) powder coated with pure polyester powder upto 60-90;microns thick in standard RAL paint colour of client choice. Outer frame section should be of 100x50 mm x;1.6 mm thick. Shutter section should be of 1.00 mm thick galvanized steel sheet pressed to provide a 46;mm thick fully flush, double skin door shell with seam joints at stile edges. Honeycomb kraft paper resin;bonded with macroplast UR 7221 glue should be used as infill to give the required rigidity and effective;acoustic insulation. The shutter should have provision to hold fire rated vision panel SCHOTT PYRAN®;STAR GLASS CERAMIC 2Hrs Fire Rated Glass Schott Pyran with UL Logo Frame & ceramic Beadings;or approved equivalent of size 200x300x5mm. The shutter should be provided with Assa Abloy Yale Fire;Rated Mortize Lock with both side key & Lever Handle + 70mm DP SN S ( AA5103 6072-F+YTL 010) or;approved equivalent. The shutter to be fixed with Assa Abloy YALE Surface Door Closer size 2~4, Adj;Arm, Fire rated-DCR-1824 FR finish silver UL certified or approved equivalent. The shutter is to be fixed;to the door frame using Assa Abloy Yale (4''x3''x3mm) Ball bearing Butt Hinges -3S2BB403030-CE;MARKED, Grade SS 304 - Finish SSS or approved equivalent. The frame is to be fixed to the;concrete/masonry wall by means of MS Electroplated Anchor Bolt with end caps and sealed with Silicon;Sealant..
4
-
-
... More
21.18 : Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately)
5.76
-
-
... More
od91884/2019_2020 : Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC;sections with Glazing bead shall be co-extruded with Grey colour soft PVC. having isolated drainage;and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall;size of 60 mm x 55 mm x 2 with reinforcement of 1 mm thickness and Mullion with overall size of 74;mm x 60 mm x 2 mm with reinforcement of 1 mm thickness. Profiles manufactured using UPVC;reinforced profiles of NCL Veka Ventilator shall be provided with 4 mm Pin Head glass. Wall thickness;of frame & Mullion shall be 2 mm.,including cost and conveyance of all materials, accessories, labour;charges for transportation, erection at site complete for finished item of work.
4
-
-
... More
od91885/2019_2020 : Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC;sections with Glazing bead shall be co-extruded with Grey colour soft PVC. having isolated drainage;and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall;size of 60 mm x 55 mm x 2 with reinforcement of 1 mm thickness and Mullion with overall size of 74;mm x 60 mm x 2 mm with reinforcement of 1 mm thickness. Profiles manufactured using UPVC;reinforced profiles of NCL Veka Ventilator shall be provided with 4 mm Pin Head glass. Wall thickness;of frame & Mullion shall be 2 mm.,including cost and conveyance of all materials, accessories, labour;charges for transportation, erection at site complete for finished item of work.
11
-
-
... More
od91817/2019_2020 : Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC;sections with Glazing bead shall be co-extruded with Grey colour soft PVC. having isolated drainage;and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall;size of 60 mm x 55 mm x 2 with reinforcement of 1 mm thickness and Mullion with overall size of 74;mm x 60 mm x 2 mm with reinforcement of 1 mm thickness. Profiles manufactured using UPVC;reinforced profiles of NCL Veka Ventilator shall be provided with 4 mm Pin Head glass. Wall thickness;of frame & Mullion shall be 2 mm.,including cost and conveyance of all materials, accessories, labour;charges for transportation, erection at site complete for finished item of work.
3
-
-
... More
od91886/2019_2020 : Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) casement windows with openable shutters duly manufactured using UPVC reinforced profiles of Fenesta, NCL Veka, Torfenester or equivalent (Composition of profile shall consist a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin and test report of CIPET to be produced) of 60 mm x 55 mm x 2.40 mm for outer frames, 60 mm x 74 mm x 2.40 mm for mullion sections and 75 mm x 60 mm x 2.40 mm for openable shutter frame capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm steel sections & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of St.Gobain or Modi or approved equivalent make, duly fixed with glazing bead of appropriate size with Grey colour TPV Gasket .The ssash shall be fixed to the frame using 2 nos. of SS friction hinges of grade 304/430,handle with zamak alloy casting 1 No. per sash, multipoint locking system suitably concealed 1 No., per sash provided with raiser wedges for smooth operation and the system is to be installed at the site using anchor fasteners, silicon sealant including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.;
9
-
-
... More
od91828/2019_2020 : Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) casement windows with openable shutters duly manufactured using UPVC reinforced profiles of Fenesta, NCL Veka, Torfenester or equivalent (Composition of profile shall consist a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin and test report of CIPET to be produced) of 60 mm x 55 mm x 2.40 mm for outer frames, 60 mm x 74 mm x 2.40 mm for mullion sections and 75 mm x 60 mm x 2.40 mm for openable shutter frame capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm steel sections & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of St.Gobain or Modi or approved equivalent make, duly fixed with glazing bead of appropriate size with Grey colour TPV Gasket .The ssash shall be fixed to the frame using 2 nos. of SS friction hinges of grade 304/430,handle with zamak alloy casting 1 No. per sash, multipoint locking system suitably concealed 1 No., per sash provided with raiser wedges for smooth operation and the system is to be installed at the site using anchor fasteners, silicon sealant including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.;
28
-
-
... More
od91887/2019_2020 : Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) casement windows with openable shutters duly manufactured using UPVC reinforced profiles of Fenesta, NCL Veka, Torfenester or equivalent (Composition of profile shall consist a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin and test report of CIPET to be produced) of 60 mm x 55 mm x 2.40 mm for outer frames, 60 mm x 74 mm x 2.40 mm for mullion sections and 75 mm x 60 mm x 2.40 mm for openable shutter frame capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm steel sections & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of St.Gobain or Modi or approved equivalent make, duly fixed with glazing bead of appropriate size with Grey colour TPV Gasket .The ssash shall be fixed to the frame using 2 nos. of SS friction hinges of grade 304/430,handle with zamak alloy casting 1 No. per sash, multipoint locking system suitably concealed 1 No., per sash provided with raiser wedges for smooth operation and the system is to be installed at the site using anchor fasteners, silicon sealant including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.;
11
-
-
... More
21.1.1.1 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)
23.04
-
-
... More
21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)
19.671
-
-
... More
21.4.2 : Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS: 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors including cost of cutting floors, embeding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer -in- Charge.With brass cover plate minimum 1.25 mm thickness
2
-
-
... More
21.12.2 : Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0mm thick & 2100 mm long with S.S. screws etc. complete as per direction of Engineer -in-Charge.Powder coated minimum thickness 50 micron aluminium tubular handle bar
2
-
-
... More
21.13 : Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete
2
-
-
... More
9.100.1 : Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm
2
-
-
... More
9.97.2 : Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:250x10 mm
2
-
-
... More
9.97.3 : Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:200x10 mm
2
-
-
... More
9.101.2 : Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper
2
-
-
... More
10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
1266.45
-
-
... More
10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
1800
-
-
... More
9.48.2 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc
2439.45
-
-
... More
10.17 : Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete.
100
-
-
... More
od91888/2019_2020 : Providing and laying 100mm thick Vacuum dewatered Cement concrete flooring with concrete hardner topping, under layer 88 mm thick cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardner consisting of mix 1:2 (1cement hardener mix : 2 graded stone aggregate,6mm nominal size ) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufacture's specifications.Including hire for vacuum dewatering equipement, mat and labour charges and also providing cutting in floor concrete with 4mm thick glass as per specification at 1.5m centre to centre as detailed in section 6 of the Bid document including cost of all materials and labour etc. complete.;
114.856
-
-
... More
26.31.2 : Providing, mixing and applying bonding coat of approved adhesive on chipped
portion of RCC as per specifications and direction of Engineer-In-charge
complete in all respect.Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make
114.856
-
-
... More
od91889/2019_2020 : Pre polished Kota stone slab flooring over 20 mm (average) thick base laid over and jointed;with grey cement slurry mixed with pigment to match the shade of the slab;including rubbing and polishing complete with base of cement mortar 1 : 4 (1;cement : 4 coarse sand) :; 25 mm thick
2275.078
-
-
... More
8.12 : Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvillinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge.a. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
246.717
-
-
... More
8.13.1 : Providing and laying Polished Granite stone flooring in required design and
patterns, in linear as well as curvilinear portions of the building all complete as
per the architectural drawings with 18 mm thick stone slab over 20 mm (average)
thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with
cement slurry and pointing with white cement slurry admixed with pigment of
matching shade including rubbing , curing and polishing etc. all complete as
specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye orequivalent.
98.37
-
-
... More
8.3.2 : Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work
575.26
-
-
... More
8.5 : Extra for providing opening or required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
18
-
-
... More
11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
15.84
-
-
... More
11.40 : Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of Ist quality conforming to IS: 15622 of approved make in all colours, shades, except white, Ivory, Grey Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete.
5.382
-
-
... More
11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
415.933
-
-
... More
11.20.3 : Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Dark shade pigment using ordinary cement
20.25
-
-
... More
16.90 : Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
11.64
-
-
... More
13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
320
-
-
... More
13.5.1 : 15 mm cement plaster on rough side of single or half brick wall of mix:1:4 ( 1 Cement : 4 coarse sand)
2143.853
-
-
... More
13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)
1504.624
-
-
... More
13.7.1 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)
760
-
-
... More
13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
6476
-
-
... More
13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
8632
-
-
... More
13.45.1 : Finishing walls with textured exterior pint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm
2181
-
-
... More
13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
7632
-
-
... More
13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
235.71
-
-
... More
13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
3896.279
-
-
... More
od91890/2019_2020 : Providing and applying intumescent fire retarding paints of required thickness to achieve fire rating of two hour to exposed steel work at any height in its finally erected position as per manufacturer's recommendations over the primered surface of steel structure on its finally erected position along with the 60micron thickness Polyurethane paint of required color as top coat.
1960
-
-
... More
od91891/2019_2020 : Providing and applying of factory blended vermiculite cement with fire protective additives and fillers as bonding and reinforcing agents designed to adhere firmly to elements with a fire rating of 2 hours as per manufacturer's recommendations over the primered surface of steel structure on its finally erected position.
2940
-
-
... More
13.58 : Providing and applying two coats of fire retardant paint on cleaned wood/ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant .
1941.04
-
-
... More
6.8 : Brick work 7 cm thick with common burnt clay F.P.S. (non modular ) brick of class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand ) in superstructure above plinth level and upto floor five level.(from floor 2 level up to floor 5 level)Brick work 7 cm thick with common burnt clay F.P.S. (non modular ) brick of class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand ) in superstructure above plinth level and upto floor five level.
1727.564
-
-
... More
od91892/2019_2020 : Providing wire mesh over recessed area for making good the surface and plastering;
750
-
-
... More
22.14.1 : Grading roof for water proofing treatment with:Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
105.955
-
-
... More
22.5 : Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
183.133
-
-
... More
22.7.1 : Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-Charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 ( 1 cement : 5 coarse sand ) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-Charge over 20 mm thick layer of cement mortar of mix 1:5 ( 1 cement : 5 coarse sand ) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer - in- Charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 ( 1 cement : 4 coarse sand ) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer - in- Charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineer in Charge:With average thickness of 120 mm and minimum thickness at khurra as 65 mm
779.21
-
-
... More
22.20.1 : Providing and laying APP ( Atctic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non- woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/ sqm by the same membrane manufacture of density at 25sup0/supC, 0.87-0.89 kg/ litre and viscocity 70-160 cps. OVER the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under: Joint strength in longitudinal and transverse direction at 23sup0/supC as 650/450N/5CM. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150sup0/supC. Cold flexibility shall be up to - 2sup/supC when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane:3 mm thick
1059.54
-
-
... More
13.21 : Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.
24853.349
-
-
... More
od91893/2019_2020 : Providing cubicle system in ladies changing room with merino or equivalent material for locker with compact laminate 3mm thick(side and back partition) and 9mm thick (top, bottom& shelves) with single colour of HPL boards and 3 tier locker with size of column 450x450x450 with acessories standard-Merino make aluminium, stainless steel-304 grade accessories: Aluminium interlocking supporting channels, SS cam locks with door number plate,SS hinges -SS, door stopper rubber lining, SS screws and pvc wall plugs and open locker for hanging dress complete as per Drg No-CDMS/DSC-ASAP/CSP/KAT-ARC-13.;
2
-
-
... More
od91894/2019_2020 : Providing cubicle system in gents changing rooms with MERINO or equivalent material for locker with compact laminate 3mm thick(side and back partition)and 9mm thick(top,bottom& shelves)with single colour of HPL boards and 3 tier locker with size of column 450x450x450 mm with standard acessories -Merino make aluminium, stainless steel-304 grade accessories: Aluminium interlocking supporting channels, SS cam locks with door number plate, SS hinges -SS, door stopper rubber lining, SS screws and PVC wall plugs and open locker for hanging dress complete as per Drg No- CDMS/DSC-ASAP/CSP/KAT-ARC-13.;
2
-
-
... More
od91895/2019_2020 : Supplying and erecting Godrej (Mobi Stack) or equivalent make compactors-Double face and Single face movable as per manufacturer's specifications
2
-
-
... More
od91896/2019_2020 : Providing and fixing toilet cubicle of standard dimension which includes 600 mm door size width made of heat,bacteria,water, chemical,stratch,impact, anti bacterial resistant 18 mm thick soild compact laminate panels tested by shriram test house.finish of the compact laminate should be suede/raw silk,which includesdoors,pilaters and intermediate panels finished with approved texture/shade as per the detail drawings and as per IS 2046 indian standard and as per fire retardant BS-476/97 standard.The product should have Green guard Certificate.;this also includes providing and fixing in position necessary hardware made out of stainless steel(grade 304) as per manufactures specification and Architects instruction like (1)door knob (2)gravity hinges(3)Thumb turn lockset indicators (4) coat hooks (5)U- channel, (6)SS shoe box plate(7)MS plate base (8) Rubber noise deafening tape (9)screws and wall plugs.;All srews of 304 grade in stainless steel with satin finish.All pilasters area supported by MS- base steel bottom cladding with stainless steel shoe box plate.The base of the stainless steel shoe box will be anchored to the floor with a clearance height upto 110 mm.fixing of intermediate panels to the wall shall be stainless steel 'L' bracket or stainless U channel section are fixed into wall with srew inzerts..
29
-
-
... More
12.52.3 : Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.12.5 mm thick square edge PVC Laminated Gypsum Tile size 595x595 mm made of Gypsum plasterboard , manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyster on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyster film so as to make the tile a completely sealed unit.
183.133
-
-
... More
od91897/2019_2020 : Providing and fixing false ceiling for gate roof with 8mm thick bison board of size 595x595mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, as directed by Engineer-in-charge. as per Drg No- CDMS/DSC-ASAP/CSP/KAT-ARC-12
6.045
-
-
... More
od91898/2019_2020 : Providing & fixing Poly carbonate multi wall plain sheet 8 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling / self tapping screw of size (5.5X55mm) with EPDM seal complete upto any pitch in horizontal /vertical / curved surfaces, but excluding the cost of purlins, rafters, trusses, and;including cutting to size and shapes where ever required.
120
-
-
... More
25.1 : Providing and supplying aluminium extruded tubular and other aluminium sectionsas per the architectural drawings and approved shop drawings , the aluminiumquality as per grade 6063 T5 or T6 as per BS 1474,including super durable powdercoating of 60-80 microns conforming to AAMA 2604 of required colour and shadeas approved by the Engineer-in-Charge. ( The item includes cost of material suchas cleats, sleeves, screws etc. necessary for fabrication of extruded aluminiumframe work. Nothing extra shall be paid on this account).
2729.024
-
-
... More
25.2 : Designing, fabricating, testing, protection, installing and fixing in position semi(grid) unitized system of structural glazing (with open joints) for linear as well ascurvilinear portions of the building for all heights and all levels, including:a) Structural analysis & design and preparation of shop drawings for the specifieddesign loads conforming to IS 875 part III (the system must passed the proof testat 1.5 times design wind pressure without any failure), including functional designof the aluminum sections for fixing glazing panels of various thicknesses, aluminiumcleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clampsetc., structural and weather silicone sealants, flashings, fire stop (barrier)-cumsmokeseals, microwave cured EPDM gaskets for water tightness, pressureequalisation & drainage and protection against fire hazard including:b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3Dimentional movement for achieving perfect verticality and fixing structural glazingsystem rigidly to the RCC/ masonry/structural steel framework of building structureusing stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetalliccontacts with nuts and washers etc. of stainless steel grade 316, of the requiredcapacity and in required numbers.c) Providing and filling, two part pump filled, structural silicone sealant and onepart weather silicone sealant compatible with the structural silicone sealant ofrequired bite size in a clean and controlled factory / work shop environment ,including double sided spacer tape, setting blocks and backer rod, all of approvedgrade, brand and manufacture, as per the approved sealant design, within and allaround the perimeter for holding glass.d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thickand of sizes, shapes and profiles, as required as per the site conditions, to seal thegap between the building structure and all its interfaces with curtain glazing tomake it watertight.e) Making provision for drainage of moisture/ water that enters the curtain glazingsystem to make it watertight, by incorporating principles of pressure equalization,providing suitable gutter profiles at bottom (if required), making necessary holesof required sizes and of required numbers etc. complete. This item includes costof all inputs of designing, labour for fabricating and installation of aluminium grid,installation of glazed units, T&P, scaffolding and other incidental charges includingwastages etc., enabling temporary structures and services, cranes or cradles etc.as described above and as specified. The item includes the cost of getting all thestructural and functional design including shop drawings checked by a structuraldesigner, dully approved by Engineer-in-charge.The item also includes the cost of all mock ups at site, cost of all samples of theindividual components for testing in an approved laboratory, field tests on theassembled working structural glazing as specified, cleaning and protection till thehanding over of the building for occupation. In the end, the Contractor shall providea water tight structural glazing having all the performance characteristics etc. allcomplete as required, as per the Architectural drawings, as per item description,as specified, as per the approved shop drawings and as directed by the Engineerin-Charge.Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extrudedaluminium section capping for fixing in the grooves of the curtain glazing andvermin proof stainless steel wire mesh shall be paid for separately under relevantitems under this sub-head. However, for the purpose of payment, only the actualarea of structural glazing (including width of grooves ) on the external face shallbe measured in sqm. up to two decimal places.Note:-2. The following performance test are to be conducted on structural glazingsystem if area of structural glazing exceeds 2500 Sqm from the certified laboratoriesaccreditated by NABL(National Accreditation Board for Testing and CalibrationLaboratories), Department of Science & Technologies, India. Cost of testing ispayable separately. The NIT approving authority will decide the necessity of testingon the basis of cost of the work, cost of the test and importance of the work.Performance Testing of Structural glazing systemTests to be conducted in the NBL Certified laboratories1. Performance Laboratory Test for Air Leakage Test (-50pa to – 300pa) & (+50pa to+300pa) as perASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr”2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testingmethod for a range up to 2000 ml.”3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01-05 testingmethod for a range upto 2000 ml”4. Structural Performance Deflection and deformation by static air pressure test(1.5 times desing wind pressure without any failure) as per ASTME-330-10 testingmethod for a range upto 50 mm”5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method forQualitative test” Tests to be conducted on site6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi)upto 2000ml”
399.566
-
-
... More
25.3 : Providing, assembling and supplying vision glass panels (IGUs) comprising ofhermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel unitsof size and shape as required and specified, comprising of an outer heatstrengthened float glass 6mm thick, of approved colour and shade with reflectivesoft coating on surface # 2 of approved colour and shade, an inner Heat strengthnedclear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primaryseal and secondary seal (structural silicone sealant) etc. all complete for the requiredperformances, as per the Architectural drawings, as per the approved shopdrawings, as specified and as directed by the Engineer-in-Charge. The IGUs shallbe assembled in the factory/ workshop of the glass processor. (Payment for fixingof IGU Panels in the curtain glazing is included in cost of item No.26.2) For payment,only the actual area of glass on face # 1 of the glass panels (excluding the areas ofthe grooves and weather silicone sealant) provided and fixed in position, shall bemeasured in sqm.(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating onface # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved makehaving properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflectioninternal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25-0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performanceglass shall be decided by technical sanctioning authority as per the site requirement
399.566
-
-
... More
25.4 : Extra for openable side / top hung vision glass panels (IGUs) including providingand supplying at site all accessories and hardwares for the openable panels asspecified and of the approved make such as heavy duty stainless steel frictionhinges, min 4 -point cremone locking sets with stainless steel plates, handles,buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts,washers etc. all complete as per the Architectural drawings, as per the approvedshop drawings, as specified and as directed by the Engineer-in-Charge.
3.996
-
-
... More
25.7 : Designing, fabricating, testing, installing and fixing in position Curtain Wall withAluminium Composite Panel Cladding, with open grooves for linear as well ascurvilinear portions of the building , for all heights and all levels etc. including:a) Structural analysis & design and preparation of shop drawings for pressureequalisation or rain screen principle as required, proper drainage of water to makeit watertight including checking of all the structural and functional design.b) Providing, fabricating and supplying and fixing panels of aluminium compositepanel cladding in pan shape in metalic colour of approved shades made out of4mm thick aluminium composite panel material consisting of 3mm thick FR grademineral core sandwiched between two Alumini um sheets (each0.5mm thick). Thealuminium composite panel cladding sheet shall be coil coated, with Kynar500based PVDF / Lumiflon based fluoropolymer resin coating of approved colourand shade on face # 1 and polymer (Service) coating on face # 2 as specified usingstainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backerrods etc.c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanisedwith serrations and serrated washers to arrest the wind load movement, fasteners,SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators toprevent bi-metallic contacts all complete required to perform as per specificationand drawing The item includes cost of all material & labour component, the cost ofall mock ups at site, cost of all samples of the individual components for testing inan approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wallwith aluminium composite panel cladding till the handing over of the building foroccupation. Base frame work for ACP cladding is payable under the relevantaluminium item.s The Contractor shall provide curtain wall with aluminiumcomposite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per theapproved shop drawings and as directed by the Engineer-in-Charge.However, for the purpose of payment, only the actual area on the external face ofthe curtain wall with Aluminum Composite Panel Cladding (including width ofgroove) shall be measured in sqm. up to two decimal places.
117.48
-
-
... More
23.1.2.2 : Boring / drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in IS: 2800 ( part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools plants & machineries required for the job, all complete as per direction of Engineer - in- Charge, upto 90 metre depth below ground level.Rocky strata including Boulders350 mm dia
85
-
-
... More
SITE DEVELOPMENT
-
-
-
... More
2.31 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared
4255
-
-
... More
2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
62.5
-
-
... More
2.33.2 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 60 cm girth up to and including 120 cm girth
5
-
-
... More
2.7.2 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Hard rock (requiring blasting)
2
-
-
... More
2.7.3 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Hard rock (blasting prohibited
2
-
-
... More
2.1.1 : Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil
1276.5
-
-
... More
2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
578.656
-
-
... More
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
28.39
-
-
... More
5.37.1 : Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in -charge. Note:- Cement content considered in this item is @330 kg/cum. Excess /less cement used as per design mix is payable/recoverable separately.All wiork upto plinth level
75.15
-
-
... More
5.35 : Add for using extra cement in the items of design mix over and above the specified cement content therein
45.6
-
-
... More
5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
66.8
-
-
... More
5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
1135.6
-
-
... More
5.12 : Providing, hoisting and fixing up to floor level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) : 3 graded stone aggregate 20 mm nominal size)
42.585
-
-
... More
13.9.1 : Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster
751.5
-
-
... More
5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
7500
-
-
... More
16.1 : Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.
1903
-
-
... More
16.79 : Providing , laying spreading and compacting graded stone aggregate ( size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub - base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer - in- Charge.
475.75
-
-
... More
od91847/2019_2020 : Providing and applying tack coat using bitumen emulsion conforming to IS : 8887, using emulsion pressure distributor including preparing the surface & cleaning with mechanical broom.;With medium setting bitumen emulsion;On W.B.M/ W.M.M @ 0.4 kg / sqm
495.968
-
-
... More
od91849/2019_2020 : Providing and laying Bitumen Penetration Macadam with hard stone aggregate of quality, size and grading as specified, with bitumen of suitable penetration grade, including required key aggregate as specified, spreading coarse aggregate with the help of self propelled/ tipper tail mounted aggregate spreader and applying bitumen by a pressure distributor and then spreading key aggregate with the help of aggregate spreader complete, including consolidation with road roller of minimum 8 to 10 tonne capacity to achieve specified values of compaction and surface accuracy:;For 50 mm compacted thickness using coarse aggregate of size 50-20 mm graded @ 0.60 cum per 10 sqm key aggregate of size 12.5 mm graded @ 0.15 cum per 10 sqm with paving asphalt grade VG - 10 @ 50 kg /10 sqm.
1903
-
-
... More
od91851/2019_2020 : Providing and applying tack coat using bitumen emulsion conforming to IS : 8887, using emulsion pressure distributor including preparing the surface & cleaning with mechanical broom.;With medium setting bitumen emulsion;On bituminous surface @ 0.25 kg/ sqm
1903
-
-
... More
od91852/2019_2020 : 2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone chippings of 13.2 mm and 11.2 mm size respectively per 100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively, including a tack coat with hot straight run bitumen, including consolidation with road roller of 6 to 9 tonne capacity etc. complete ( tack coat to be paid for separately):;With paving Asphalt grade VG - 10 heated and the mixed with solvent at the rate of 70 grams per kg of asphalt
1903
-
-
... More
od91855/2019_2020 : Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve ) with bitumen using 128 kg of bitumen of grade VG - 10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road roller all complete.
1903
-
-
... More
16.68 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
1825
-
-
... More
16.69 : Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge)
13.44
-
-
... More
4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
19.2
-
-
... More
10.25.2 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
2656.36
-
-
... More
13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
167
-
-
... More
COMPOUND WALL
-
-
-
... More
2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
224
-
-
... More
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
28
-
-
... More
7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)
126
-
-
... More
7.2.1 : Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like.Cement mortar 1:6 (1 cement : 6 coarse sand)
126
-
-
... More
50.6.1.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.
140
-
-
... More
13.5.1 : 15 mm cement plaster on rough side of single or half brick wall of mix:1:4 ( 1 Cement : 4 coarse sand)
1400
-
-
... More
13.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
1400
-
-
... More
SECURITY CABIN AND ELECTRICAL ROOM
-
-
-
... More
2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
29.37
-
-
... More
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
8.91
-
-
... More
7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)
25.815
-
-
... More
6.47 : Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor Vlevel with RCC band at sill level and lintel level with approved block laying polymermodified adhesive mortar all complete as per direction of Engineer-in-Charge. (Thepayment of RCC band and reinforcement shall be made for seperately).
25.856
-
-
... More
od91814/2019_2020 : Providing of 35mm thick Factory made Pre-laminated ABS (Acrolynitrile Butadyne Styrene) Door;shutter consisting of all round Frame made out of water proof solid foam PVC bar of size 20x32mm;reinforced by 32x 32mm vertical made out of LVL (Laminated Veneer Lumber), core material of 32 mm;thick high density craft paper honeycomb board, sandwiched on both sides with pre-laminated ABS;sheet thickness of 1.5mm . The shutter should have PVC edge banding of size 0.45mm on the;vertical & bottom sides. The shutter to be fixed to pre-laminated FPVC (Foamed Polyvinyl Chloride);Door frame of the size 105x40mm with a wall thickness of 10mm made out of extruded rigid FPVC;profile, mitre joined with 6 Nos. of 50mm steel screw ,GI stiffners of roll formed "U" GI channel of size;29x9x1mm, 150mm long at each hinge point and frame reinforcement of roll formed "U" GI channel of;size 46x22x.06mm) should be provides. The frame should have a bottom tie rod of "U" GI chanel size;of 15x15x1mm . The shutter shall be fixed to the door frame using Buttefly hinges of SSS finish and;shall be provided with mortise lock with handles of Godrej or approved equivalent make. The door;frame shall be fixed to the wall by using 80mm long screws through the frame with the help of PVC;fasteners and covered with screw caps.
3
-
-
... More
od91817/2019_2020 : Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC;sections with Glazing bead shall be co-extruded with Grey colour soft PVC. having isolated drainage;and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall;size of 60 mm x 55 mm x 2 with reinforcement of 1 mm thickness and Mullion with overall size of 74;mm x 60 mm x 2 mm with reinforcement of 1 mm thickness. Profiles manufactured using UPVC;reinforced profiles of NCL Veka Ventilator shall be provided with 4 mm Pin Head glass. Wall thickness;of frame & Mullion shall be 2 mm.,including cost and conveyance of all materials, accessories, labour;charges for transportation, erection at site complete for finished item of work.
1
-
-
... More
od91828/2019_2020 : Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) casement windows with openable shutters duly manufactured using UPVC reinforced profiles of Fenesta, NCL Veka, Torfenester or equivalent (Composition of profile shall consist a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin and test report of CIPET to be produced) of 60 mm x 55 mm x 2.40 mm for outer frames, 60 mm x 74 mm x 2.40 mm for mullion sections and 75 mm x 60 mm x 2.40 mm for openable shutter frame capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm steel sections & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of St.Gobain or Modi or approved equivalent make, duly fixed with glazing bead of appropriate size with Grey colour TPV Gasket .The ssash shall be fixed to the frame using 2 nos. of SS friction hinges of grade 304/430,handle with zamak alloy casting 1 No. per sash, multipoint locking system suitably concealed 1 No., per sash provided with raiser wedges for smooth operation and the system is to be installed at the site using anchor fasteners, silicon sealant including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.;
1
-
-
... More
13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)
129.271
-
-
... More
13.5.1 : 15 mm cement plaster on rough side of single or half brick wall of mix:1:4 ( 1 Cement : 4 coarse sand)
105.211
-
-
... More
10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
748.125
-
-
... More
10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
335.07
-
-
... More
12.51.6 : Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Gutter (600 mm over all girth)
72.213
-
-
... More
13.45.1 : Finishing walls with textured exterior pint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm
67.34
-
-
... More
13.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
37.87
-
-
... More
13.52.2 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On concrete work
129.271
-
-
... More
13.62.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .
72.213
-
-
... More
11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
10.08
-
-
... More
11.40 : Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of Ist quality conforming to IS: 15622 of approved make in all colours, shades, except white, Ivory, Grey Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete.
1.56
-
-
... More
11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
52.375
-
-
... More
PLUMBING AND SANITARY
-
-
-
... More
17.80 : Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx.size 610x390x370 mm having pre & post flushing with water ( 250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer - in-charge.
17
-
-
... More
od91807/2019_2020 : Providing, Fixing, Testing and Commissioning at site Wall Mounting type water closet with P trap & its all fittings like rag bolts, solid plastic Seat cover etc and Concealed flushing cistern, brass screws, nuts , and washers complete including cutting and making good the walls and floors wherever required. Etc complete.;
29
-
-
... More
od91809/2019_2020 : Providing, Fixing, Testing and Commissioning at site Handicapped Wall mounting water closet with P trap & it’s all fittings like rag bolts, solid plastic seat cover etc., and Concealed flushing cistern, brass screws, nuts, and washers. Flat back Wash Basin with half pedestal with accessories Flexible Connection tube, 32 mm C.P. brass waste coupling, rag bolts. With 1 health faucet, 2 Angle valves, 1 Pillar tap,1 Bottle trap, 2 Grab bars ,1 Hand rail & complete including cutting and making good the walls and floors wherever required. Etc complete.;
3
-
-
... More
od91812/2019_2020 : Providing, Fixing, testing and commissioning at site Wash Basin with C.I. brackets, 15mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require.;Oval Wash basin Counter Top;;
34
-
-
... More
18.53.1 : Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore
66
-
-
... More
50.17.1.5 : Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
29
-
-
... More
17.31 : Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
6
-
-
... More
17.32.4 : Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm
14
-
-
... More
18.50.1 : Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore
8
-
-
... More
17.10.1.3 : Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink with drain board510x1040 mm bowl depth 200 mm
1
-
-
... More
od91827/2019_2020 : Providing, Fixing, testing and commissioning Sink cock wall mounted with swivel casted spout and wall flange, trending,cutting and making good the walls wherever required.;
1
-
-
... More
17.70.2 : Providing and fixing PTMT Bottle Trap for Wash basin and sink.Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the center of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms
34
-
-
... More
od91835/2019_2020 : Providing, Fixing CP Robe Hook with fixing screws;
32
-
-
... More
od91838/2019_2020 : "B SOIL, WASTE, VENT & RAIN WATER PIPES ;Providing, Fixing, testing and commissioning at site in position uPVC pipe (SWR-Type B) (IS:13592) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, clamps, coupling, door bends, junctions, cowls, etc., laid under floor/fixed on walls, and in pipe shafts, universal clamps & anchor fasteners(8mm), threaded rod (8mm),nuts, washers, wherever required etc. complete. (In Shaft) (Make Astral)";110 mm O.D. (SWR Type-B);;
65
-
-
... More
od91839/2019_2020 : Providing, Fixing, testing and commissioning at site in position uPVC pipe (SWR-Type A) (IS:13592) or ( IS : 4985 ) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, clamps, coupling, etc. complete. (For Rain water pipes );63 mm O.D ( 4Kg/cm2) Vent pipe in shaft;
70
-
-
... More
od91842/2019_2020 : Providing, Fixing, testing and commissioning at site in position uPVC pipe (SWR-Type A) (IS:13592) or ( IS : 4985 ) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, clamps, coupling, etc. complete. (For Rain water pipes ) ;110mm O.D Type A ;
65
-
-
... More
od91843/2019_2020 : Providing, Fixing, testing and commissioning at site in position u PVC pipe of 6Kg/sq.cm (IS:4985) & SWR Type B IS 13592 including PVC fittings with bosses where required e.g. tees, bends, clamps, coupling and adapters and jointing with adhesive approved by fitting manufactures including cutting and making good the walls and floors or surface mounted with clamps as required at site universal clamps & anchor fasteners(8mm) , threaded rod(8mm),nuts, washers, wherever required etc. complete. (For Internal waste line) ;110mm ;
230
-
-
... More
od91844/2019_2020 : Providing, Fixing, testing and commissioning at site in position u PVC pipe of 6Kg/sq.cm (IS:4985) & SWR Type B IS 13592 including PVC fittings with bosses where required e.g. tees, bends, clamps, coupling and adapters and jointing with adhesive approved by fitting manufactures including cutting and making good the walls and floors or surface mounted with clamps as required at site universal clamps & anchor fasteners(8mm) , threaded rod(8mm),nuts, washers, wherever required etc. complete. (For Internal waste line) ;75 mm ;
170
-
-
... More
od91845/2019_2020 : Providing, Fixing, testing and commissioning at site in position u PVC pipe of 6Kg/sq.cm (IS:4985) & SWR Type B IS 13592 including PVC fittings with bosses where required e.g. tees, bends, clamps, coupling and adapters and jointing with adhesive approved by fitting manufactures including cutting and making good the walls and floors or surface mounted with clamps as required at site universal clamps & anchor fasteners(8mm) , threaded rod(8mm),nuts, washers, wherever required etc. complete. (For Internal waste line) ;50 mm;
45
-
-
... More
od91846/2019_2020 : Providing, Fixing, testing and commissioning at site in position u PVC pipe of 6Kg/sq.cm (IS:4985) & SWR Type B IS 13592 including PVC fittings with bosses where required e.g. tees, bends, clamps, coupling and adapters and jointing with adhesive approved by fitting manufactures including cutting and making good the walls and floors or surface mounted with clamps as required at site universal clamps & anchor fasteners(8mm) , threaded rod(8mm),nuts, washers, wherever required etc. complete. (For Internal waste line) ;40 mm;
65
-
-
... More
od91848/2019_2020 : "Providing, Fixing, testing and commissioning at site in position Deep Seal UPvc fabricated Multi floor trap (7”), with suitable supporting on GI slotted rails (1.6mmthick) full threaded rod, anchor fasteners etc. complete in all respects.;50/75 mm dia outlet (In Ceiling)
67
-
-
... More
od91850/2019_2020 : Providing,Fixing, testing and commissioning at site 150x150 mm square C.P. cast brass or stainless steel anti cockroach grating cover SS (304) of matching size of UPvc fabricated floor trap / multi inlet trap complete in all respects.
67
-
-
... More
od91853/2019_2020 : "Providing, Fixing, testing and commissioning at site in position Concealed floor trap (7”Deep Seal UPvc fabricated Multi floor trap with Stainless Steel Square frames (150x150mm) SS (304), Rubber Seal and flat round cover with screw and suitable supporting on GI slotted rails (1.6mmthick) full threaded rod, anchor fasteners etc. complete in all respects.; 50/75 mm dia outlet (For Urinals In Ceiling)";
8
-
-
... More
od91854/2019_2020 : Providing, Fixing, testing and commissioning at site in position Floor clean out with Stainless Steel Square frames SS (304), Rubber Seal and flat round cover with screw. complete in all respects.110mm dia ;
5
-
-
... More
od91856/2019_2020 : Providing, Fixing, testing and commissioning at site in position Floor clean out with Stainless Steel Square frames SS (304), Rubber Seal and flat round cover with screw. complete in all respects. ;75mm dia (3”) ;
4
-
-
... More
18.8.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes
182
-
-
... More
18.8.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes
135
-
-
... More
18.8.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.32 mm nominal outer dia pipes
92
-
-
... More
od91857/2019_2020 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This included jointing of pipes& fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including chases and making good the walls etc. (Internal Cold Water Supply);40 mm dia.nominal outer dia pipes.;
5
-
-
... More
od91858/2019_2020 : Providing, Fixing at site in position uPVC Pipes (as per ASTM D – 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D – 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft) ;2”(50mm) dia;
35
-
-
... More
od91859/2019_2020 : Providing, Fixing at site in position uPVC Pipes (as per ASTM D – 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D – 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft) 1 ½” (40mm) dia
12
-
-
... More
od91860/2019_2020 : Providing, Fixing at site in position uPVC Pipes (as per ASTM D – 1785 sch-80 ) of approved make For Pumping line from ( Sump Tank To Over head Tank) complete with all necessary (ASTM D – 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc);1 ½” (40mm) dia ;
75
-
-
... More
18.18.2 : Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:20 mm nominal bore
7
-
-
... More
18.18.3 : Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:25 mm nominal bore
6
-
-
... More
od91861/2019_2020 : Providing and Fixing Ball Valves (Brass) of approved quality, High or low pressure, with plastics floats complete:; 32mm nominal bore;
7
-
-
... More
od91862/2019_2020 : Providing and Fixing Ball Valves (Brass) of approved quality, High or low pressure, with plastics floats complete:; 50mm nominal bore;
2
-
-
... More
od91863/2019_2020 : Providing, Fixing at site in position CI Butterfly valve (PN 16) wafer type of approved make with necessary PVC flanges, gaskets, nuts and bolts etc complete within position as per drawings. ;2 ½”(65mm) dia ;
8
-
-
... More
18.19.3.2 : Providing and fixing gun metal non-return valve of approved quality (screwed end):40 mm nominal boreVertical
2
-
-
... More
od91865/2019_2020 : Providing,Fixing,testing and commissioning at site GI Slotted Rail Brackets,hangers,supports with necessary drilling holes to suit the inzertion of pipe clamps, deburring etc.,as per detailed drawing for supporting soil, waste & rain water pipes & water supply pipes in shafts with suitable GI clamps,bolts,anchor bolts nuts & washers fixed on shaft walls/outer walls etc.The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 1.6mm thick confirmed to IS 1239 etc.,complete as directed by the employer.(Hitech Supports/ Equivalent);Hot dip galvanized (Fully exposed to weather and wet areas);
10
-
-
... More
od91867/2019_2020 : Providing,Fixing,testing and commissioning at site GI Slotted Rail Brackets,hangers,supports with necessary drilling holes to suit the inzertion of pipe clamps, deburring etc.,as per detailed drawing for supporting soil, waste & rain water pipes & water supply pipes in shafts with suitable GI clamps,bolts,anchor bolts nuts & washers fixed on shaft walls/outer walls etc.The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 1.6mm thick confirmed to IS 1239 etc.,complete as directed by the employer.(Hitech Supports/ Equivalent);Electro Galvanized (In shaft and dry interior areas);
130
-
-
... More
od91869/2019_2020 : Providing, Fixing, testing and commissioning at site in positions automatic Air Release Valves, ball valves of approved quality and make on the top of the vertical water supply pipes as per specification and drawings (Make Lehry);3/4"(20mm) dia;
1
-
-
... More
od91871/2019_2020 : Providing, Fixing, testing and commissioning at site in positions Brass Y Strainer, of approved quality and make as per specification and drawings. ;2 ½”(65mm) dia ;
1
-
-
... More
2.10.1.1 : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:All kinds of soilPipes, cables etc, not exceeding 80 mm dia
16
-
-
... More
2.10.1.2 : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia
40
-
-
... More
od91873/2019_2020 : Providing and Laying of pipes and conveying to position; cleaning, laying and jointing to true lines and gradients, PVC pipe of IS 4985(6kg/cm2) including jointing the pipe as per specification, testing the pipe line after installation all per provisions of IS: 1742-1983 (Code of practice for building drainage) complete;110mm OD ;
135
-
-
... More
19.7.1.2 : Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weigh of cover 23 kg and weight of frame 15 kg):With Sewer bricks conforming to IS : 4885
8
-
-
... More
19.8.1.2 : Extra for depth for manholesSize 90x80 cmWith Sewer bricks conforming to IS : 4885
4
-
-
... More
19.11.1.2 : Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 ( 1 cement: 4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 ( 1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design:1.68 m deep with SFRC cover and frame (heavy duty Hd- 20 grade designation)
560 mm internal diameter conforming to IS: 12592, total weight of cover and frame to be not less than 182 kg fixed in cement concrete 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. ( Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately)With sewer bricks conforming IS:4885
6
-
-
... More
19.12.2 : Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 m to 2.29 m:With sewer bricks conforming IS:4885
7
-
-
... More
19.4.2.2 : 150x100 mm size P typeWith sewer bricks conforming to IS:4885
8
-
-
... More
od91874/2019_2020 : Providing and fixing Ductile Iron (Hinged Type) cover and frame.; 600X600mm size 40kg wt for Overhead Tank
4
-
-
... More
od91876/2019_2020 : Providing and fixing Ductile Iron (Hinged Type) cover and frame.; 900X900mm size 125kg wt for Sump Tank;;
4
-
-
... More
od91877/2019_2020 : "E. PUMP AND ACCESSORIES ;Providing, Fixing, testing and commissioning;Hydro pneumatic pressure booster system with 2 (1W +1 Assist ) Nos Vertical Multistage Inline pump set with SS impeller, SS Shafts and SS casing. Each pumps should be capable to deliver 3 lps @ 2 bar , with 1.1kW/1.5 HP/3phase motor. Suction and Delivery of each pumps should be connected to a GI manifolds with suitable size, isolation ball valves and NRV in delivery of each pump. A common control panel to operate the pump set as 1 working + 1Assist/ Standby according to the demand , Control panel shall be of variable speed drive( VFD ), HMI, Dry run ,Over load, Phase reversal,error log display, flaulty pump isolation, Protections Etc, Control panel logic should be designed in such a way that all the pumps should be soft start with VFD in cascading manner to increase the life and power savings. The entire system shall be supplied with all the pump sets and control panel assembled in a common GI Skid completely assembled and tested at factory for the duty points along with 100 ltr pressure vessel.;Inlet pipe size 65 mm inner dia ;Outlet header line Size 65mm inner dia;";;
1
-
-
... More
od91878/2019_2020 : Providing, Fixing, testing and commissioning at site Water Treatment Plant 2000LPH (WTP)with equipments like filter feed pump Hozizontal, self priming monobloc having 1HP/0.75KW/1Phase delivering at 2000LPH@25 head,Pressure Sand Filter of capcity 2.0m3/hr, Activated Carbon Filter of capacity 2.0m3/hr,Automatic Clorine dosing pump having capacity of 4lph@6bar with tank of 50ltr capacity and accessories.;
1
-
-
... More
od91879/2019_2020 : "Providing, Fixing, testing and commissioning Automatic Tank Filling system with 2 ( 1W+ 1S) Nos Surface Mounting Monoblock pumpset with Ci impeller ,Ci :Motor Casing ,. Each pump capable to deliver 2.2 lps@ 25 mtr head and with 1.1 kw/ 1.5 hp / 1ph, . A Wall Mounting control panel for pumps operate the pumpset as 1 working + 1 Standby according to the demand, level controller with Dry Run Protection,Overload protection, float switch/ Sensors for automatic operation ,etc . The entire system to be supplied with all the pump sets and automatic pump controller .;Delivery Pipe Size to be provided : 40 MM ";
1
-
-
... More
LANDSCAPING WORKS
-
-
-
... More
30.2.2 : Supplying and stacking of good earth at site including royalty and carriage upto 5 k.m. lead complete (earth measured in stacks will be reduced by 20% for payment).
270
-
-
... More
30.2.4.1 : Supplying and stacking at site dump manure from approved source, including carriage upto 5 k.m. lead complete (manure measured in stacks will be reduced by 8% for payment) :Screened through sieve of I.S. designation 20 mm
270
-
-
... More
30.2.8 : Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
1080
-
-
... More
30.2.9 : Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge
1080
-
-
... More
30.2.33 : Providing and fixing Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and even, watering with sprinkler
10
-
-
... More
od91818/2019_2020 : Supplying and planting healthy plants of the following species of appropriate growth including necessary maintenance of the plants (as and when required) at site as directed by Engineer-in-Charge.(Trees to have a height of 120 to 150 cms, shrubs to have a height of 30 to60cms at the time of planting);Trees;Ficus Benjamina.;
20
-
-
... More
od91820/2019_2020 : Supply and stacking of Saraca indica (Sita Ashok)plant of height 105-120 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.;
55
-
-
... More
od91822/2019_2020 : Supplying and planting healthy plants of the following species of appropriate growth including necessary maintenance of the plants (as and when required) at site as directed by Engineer-in-Charge. (Trees to have a height of 120 to 150 cms, shrubs to have a height of 30 to at the time of planting)TreesTabernaemontana Divaricata.;
300
-
-
... More
od91825/2019_2020 : Supplying and planting healthy plants of the following species of appropriate growth including necessary maintenance of the plants (as and when required) at site as directed by Engineer-in-Charge. (Trees to have a height of 120 to 150 cms, shrubs to have a height of 30 to at the time of planting);Shrubs;Duranta Gold.;
238
-
-
... More
od91829/2019_2020 : Supplying and Planting grass over the red earth and sand bed closely to get a thick grass lawn suitable for ground in rows of 5cm apart in both direction, keep the area moisture by spraying and sprinkling water till the grass gets sufficient deep roots cutting to level the top surface, trimming and dressing etc. complete as directed by the Engineer-in-Charge.;Axonopus compressus;
1400
-
-
... More
od91831/2019_2020 : Supplying and planting healthy plants of the following species of appropriate growth including necessary maintenance of the plants (as and when required) at site as directed by Engineer-in-Charge.(Trees to have a height of 120 to 150 cms, shrubs to have a height of 30 to60cms at the time of planting);Trees;Plumeria Rubra.;
8
-
-
... More
od91833/2019_2020 : Supplying river sand brought from outside including transportation, loading, unloading, taxes etc complete as directed by the Engineer-in- charge;
250
-
-
... More
od91836/2019_2020 : Supplying and planting healthy plants of Plumeria alba of height 165-180 cm. with 3-4 branches and thick stem in big size HDPE bags of appropriate growth including necessary maintenance of the plants (as and when required) at site as directed by Engineer-in-Charge.;
21
-
-
... More
SEWAGE TREATMENT PLANT
-
-
-
... More
od91805/2019_2020 : "Coarse Screen for Sewage & Sullage made of 1"" Square frame and 1/2 "" pipe made of stainless steel. The spacing between the bars shall be 10 mm. ;";Angle of Inclination - 45 ;
1
-
-
... More
od91808/2019_2020 : Fine Screen for Sullage made of 1" Square frame and 6 mm perorated sheet made of stainless steel. The spacing between the pores shall be 6 mm.;Size-0.70 x 0.5 x 100;
1
-
-
... More
od91810/2019_2020 : "Submersible Sewage Pumps for Transferring Sewage from Collection tanks;";Duty - Continuous;Capacity - 6 m3/hr;Head - 10 m;Power- 1HP;
2
-
-
... More
od91811/2019_2020 : Fine Bubble Diffusers for Aeration grid inside SBR;Type - Disc;Capacity - 5 m3/hr;
5
-
-
... More
od91816/2019_2020 : Coarse Bubble Diffusers for Aeration grid inside SBR;Type - Disc;Capacity - 5 m3/hr;
4
-
-
... More
od91819/2019_2020 : Twin Lobe Blower coupled with Motor and other essential accessories for the supply of compressed air in Aeration Grids;Duty - Continuous;Capacity - 40 m3/hr;Diff Pressure - 0.5 bar;Power- 2HP;Insulation type - F class;
2
-
-
... More
od91821/2019_2020 : Dosing pump for Chemical Addition including Chemical Tank;Type - Disc;Capacity - 8 LPH;Head range : 4-2 bar;Power- 0.025 HP;
3
-
-
... More
od91824/2019_2020 : Pressure Sand Filter for the primary filtration of clarified water ;Working pressure - 2.5 Bar;Flow rate - 1.5 m3/hr;Media type - Sand & Silex;Diameter - 13";Height - 54";
1
-
-
... More
od91826/2019_2020 : Transfer Pumps for Decanting;Duty - Continuous;Packing - Mechanical;Capacity - 6 m3/hr;Head - 10 m;
2
-
-
... More
od91830/2019_2020 : Transfer Pump for Sludge Wasting;Duty - Continuous;Packing - Mechanical;Capacity - 5 m3/hr;Head - 10 m;
1
-
-
... More
od91832/2019_2020 : Activated Carbon Filter removal of volatile gases present in filtered water.Working pressure - 2.5 BarFlow rate - 1.5 m3/hrMedia type - Activated carbon & SilexDiameter - 13"Height - 54"
1
-
-
... More
od91834/2019_2020 : Filter Feed Pumps for feeding clarified water to Sand Filter & Carbon Filter;Duty - Continuous;Packing - Mechanical;Capacity - 1.5 m3/hr;Head - 25 m;Power- 2HP;;
2
-
-
... More
od91837/2019_2020 : Supply and installation of Water meter as per PCB Norms -1.5" inlet/outlet;
1
-
-
... More
od91840/2019_2020 : *Cost of Engineering, Consultancy & Liaisoning works;
1
-
-
... More
od91841/2019_2020 : Cost of Installation, Testing & Commissioning of the plant;
1
-
-
... More
ENVIRONMENTAL MANAGEMENT
-
-
-
... More
od91806/2019_2020 : Hiring of expert third party for inspection agency for periodic monitoring, report generating, reviewing and documentation of environmental report based on the studies on;1.Measurement of respirable suspended particulate matter(PM10), method as per IS 5182(part 23);2006;2.Noise level Monitoring;3.water sampling and analysis;4.Ampient air quality
8
-
-
... More
FACADE WORK
-
-
-
... More
od91804/2019_2020 : FACADE LOUVER SYSTEM;Provide, Fabrication, Supply, Installation, Testing, of Glass Fiber Reinforced Concrete (GRC) louvers system to with stand the design wind speed of 44 meter/sec confirming to IS -875 part III.). The fastening brackets of MS hot deep galvanized / Aluminum brackets with washers to arrest the wind load movement, fasteners and anchor bolts. Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawings. All facade systems mentioned in the BOQ shall be based on approved concept architectural drawings (Plans, elevations & sections) provided by the project architect, Technical specifications and all relevant Indian & International standards.
190.8
-
-
... More
UNDER GROUND SUMP
-
-
-
... More
2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
76.995
-
-
... More
2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil
118.059
-
-
... More
od92283/2019_2020 : Extra for additional lead upto 1km
150
-
-
... More
2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
38.201
-
-
... More
4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
7.7
-
-
... More
5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
4.38
-
-
... More
5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
44.8
-
-
... More
5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
246.4
-
-
... More
5.33.1 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level
42.562
-
-
... More
5.34.1 : Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable/ recoverable separately.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum).
43
-
-
... More
5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
5160
-
-
... More
od92287/2019_2020 : Providing and Iaying PVC membrane waterproofing system over the vertical side for retaining wall. Installing geotextile of 300gsm as correction layer, over the vertical side of the wall, before installation PVC membrane 2mm thick of approved manufactor shall conform to the physical and chemical properties such as: Elongation at break (300%) UNI EN ISO 527-3 or equivalent, Ultimate Tensile Strength (> 16.7 N/mm²), Puncture resistance (> 1100mm) DIN 16726-5.12 or equivalent, Hydrostatic pressure Waterproof UNI EN 1928 resistance (6 hours at 5 bar) or equivalent on vertical side, providing and fixing suitable arrangement for fixing mechanically onto the vertical wall to hold the membrane in vertical position against sagging due to self weight of the membrane and without damaging the PVC membrane and providing and Installing 2mm thick synthetic membrane of plasticized PVC with double seam welding of PVC waterproofing membrane joints and pressure testing of the same to 2 bars up to 10 minutes and with compartmentalization by welding PVC water stop with welding fins at all construction joints and at strategic locations to make a compartment of 200 sqmtrs pre installed with required number of injection flanges in every compartment fitted with inlet / outlet pipe and surface access box. ;The cost shall include the cost for providing and Installing a minimum protection layer of 300gsm or 25mm thick EPS protection boards over the vertically installed PVC waterproofing membrane, on the vertical face of the retaining wall to act as a protection layer against backfill and all pressure release mechanism etc complete as directed by the Engineer In Charge.
240.8
-
-
... More
4.12 : Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification .
6720
-
-
... More
13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
336
-
-
... More
od92288/2019_2020 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 65mm
3
-
-
... More
od92289/2019_2020 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 80mm
3
-
-
... More
od92291/2019_2020 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 150mm
3
-
-
... More
od92290/2019_2020 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 100mm
3
-
-
... More
19.18.3 : Supplying and fixing C.I with out frame for manholes:560 mm diameter ( heavy duty) the weight of the cover to be not less than 108 kg
4
-
-
... More
OVER HEAD TANK
-
-
-
... More
5.33.2 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level
21.704
-
-
... More
5.34.1 : Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable/ recoverable separately.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum).
25
-
-
... More
5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
31.038
-
-
... More
5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
20.541
-
-
... More
5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
12.8
-
-
... More
5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
77.84
-
-
... More
5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
12600
-
-
... More
13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
80.16
-
-
... More
od92287/2019_2020 : Providing and Iaying PVC membrane waterproofing system over the vertical side for retaining wall. Installing geotextile of 300gsm as correction layer, over the vertical side of the wall, before installation PVC membrane 2mm thick of approved manufactor shall conform to the physical and chemical properties such as: Elongation at break (300%) UNI EN ISO 527-3 or equivalent, Ultimate Tensile Strength (> 16.7 N/mm²), Puncture resistance (> 1100mm) DIN 16726-5.12 or equivalent, Hydrostatic pressure Waterproof UNI EN 1928 resistance (6 hours at 5 bar) or equivalent on vertical side, providing and fixing suitable arrangement for fixing mechanically onto the vertical wall to hold the membrane in vertical position against sagging due to self weight of the membrane and without damaging the PVC membrane and providing and Installing 2mm thick synthetic membrane of plasticized PVC with double seam welding of PVC waterproofing membrane joints and pressure testing of the same to 2 bars up to 10 minutes and with compartmentalization by welding PVC water stop with welding fins at all construction joints and at strategic locations to make a compartment of 200 sqmtrs pre installed with required number of injection flanges in every compartment fitted with inlet / outlet pipe and surface access box. ;The cost shall include the cost for providing and Installing a minimum protection layer of 300gsm or 25mm thick EPS protection boards over the vertically installed PVC waterproofing membrane, on the vertical face of the retaining wall to act as a protection layer against backfill and all pressure release mechanism etc complete as directed by the Engineer In Charge.
80.16
-
-
... More
4.12 : Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification .
1603.201
-
-
... More
od92288/2019_2020 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 65mm
3
-
-
... More
od92289/2019_2020 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 80mm
3
-
-
... More
od92290/2019_2020 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 100mm
3
-
-
... More
19.18.3 : Supplying and fixing C.I with out frame for manholes:560 mm diameter ( heavy duty) the weight of the cover to be not less than 108 kg
3
-
-
... More
STP / SEPTIC TANK
-
-
-
... More
2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
56.595
-
-
... More
2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil
86.779
-
-
... More
od92283/2019_2020 : Extra for additional lead upto 1km
150
-
-
... More
2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
82.301
-
-
... More
4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
5.66
-
-
... More
5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
3.781
-
-
... More
5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
211.4
-
-
... More
5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
32.2
-
-
... More
5.33.1 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level
34.02
-
-
... More
5.34.1 : Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable/ recoverable separately.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum).
35
-
-
... More
5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
4200
-
-
... More
od92287/2019_2020 : Providing and Iaying PVC membrane waterproofing system over the vertical side for retaining wall. Installing geotextile of 300gsm as correction layer, over the vertical side of the wall, before installation PVC membrane 2mm thick of approved manufactor shall conform to the physical and chemical properties such as: Elongation at break (300%) UNI EN ISO 527-3 or equivalent, Ultimate Tensile Strength (> 16.7 N/mm²), Puncture resistance (> 1100mm) DIN 16726-5.12 or equivalent, Hydrostatic pressure Waterproof UNI EN 1928 resistance (6 hours at 5 bar) or equivalent on vertical side, providing and fixing suitable arrangement for fixing mechanically onto the vertical wall to hold the membrane in vertical position against sagging due to self weight of the membrane and without damaging the PVC membrane and providing and Installing 2mm thick synthetic membrane of plasticized PVC with double seam welding of PVC waterproofing membrane joints and pressure testing of the same to 2 bars up to 10 minutes and with compartmentalization by welding PVC water stop with welding fins at all construction joints and at strategic locations to make a compartment of 200 sqmtrs pre installed with required number of injection flanges in every compartment fitted with inlet / outlet pipe and surface access box. ;The cost shall include the cost for providing and Installing a minimum protection layer of 300gsm or 25mm thick EPS protection boards over the vertically installed PVC waterproofing membrane, on the vertical face of the retaining wall to act as a protection layer against backfill and all pressure release mechanism etc complete as directed by the Engineer In Charge.
194.6
-
-
... More
4.12 : Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification .
3892
-
-
... More
13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
275.8
-
-
... More
od92288/2019_2020 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 65mm
3
-
-
... More
od92289/2019_2020 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 80mm
3
-
-
... More
od92291/2019_2020 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 150mm
3
-
-
... More
od92290/2019_2020 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 100mm
3
-
-
... More
19.18.3 : Supplying and fixing C.I with out frame for manholes:560 mm diameter ( heavy duty) the weight of the cover to be not less than 108 kg
4
-
-
... More
SIGNAGE BOARD
-
-
-
... More
od92282/2019_2020 : Supply, Fabrication and erection of MS Farme for Sign board with Mild steel angle iron 75 mm x 75 mm x 6 mm for erecting the sign board.
800.3
-
-
... More
od92284/2019_2020 : Providing and installing in position the following type of sign boards made out of 3mm thick rigid PVC board with computer cut with texts written to recommended height in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes, Letter height, Colour, Back ground, language and mounting height of the board shall be fixed at all height/ as per drawing
1.782
-
-
... More
od92285/2019_2020 : Providing and installing in position the following type of sign boards made out of 1.5 mm thick 304 grade stainless steel with computer cut with texts written to recommended height in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes, Letter height, Colour, Back ground, language and mounting height of the board shall be fixed at all height/ as per drawing
2.5
-
-
... More
od92286/2019_2020 : Providing and installing in position the following type of sign boards made out of 4mm thick ACP sheet with computer cut with texts written to recommended height in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes, Letter height, Colour, Back ground, language and mounting height of the board shall be fixed at all height/ as per drawing as per design mounted on 2.5cm x 2.5cm size square MS pipe frame
42.86
-
-
... More
ELECTRICAL LT
-
-
-
... More
1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm
9000
-
-
... More
1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
5200
-
-
... More
1.21.3 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm
1200
-
-
... More
1.10.1 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC conduit,
with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS
PVC insulated copper conductor single core cable etc as required.Group A
21
-
-
... More
1.10.2 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC conduit,
with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS
PVC insulated copper conductor single core cable etc as required.Group B
27
-
-
... More
1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC conduit,
with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS
PVC insulated copper conductor single core cable etc as required.Group C
86
-
-
... More
1.11 : Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
26
-
-
... More
1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
5075
-
-
... More
1.12 : Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single corecable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulatedcopper conductor single core cable for loop earthing as required.
2025
-
-
... More
1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire
3550
-
-
... More
1.14.3 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire
2020
-
-
... More
1.14.4 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 6 Sq.mm + 1 x 6 sq.mm earth wire
500
-
-
... More
1.14.5 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 10 sq. mm + 1 X 6 sq. mm earth wire
200
-
-
... More
1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch
469
-
-
... More
1.24.2 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.2 way 5/6 amps switch
25
-
-
... More
1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch
105
-
-
... More
1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet
322
-
-
... More
1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet
105
-
-
... More
od92137/2019_2020 : Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.;25A Socket outlet ;
39
-
-
... More
od92142/2019_2020 : Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.;32A DP Switch;
38
-
-
... More
1.24.8 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Bell push
5
-
-
... More
od92145/2019_2020 : 25A Weather proof 3 pin plug socket with double pole switch for car charging socket including metal box with IP65 protection etc. complete;
5
-
-
... More
1.25 : Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
94
-
-
... More
1.26 : Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
150
-
-
... More
1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)
100
-
-
... More
1.27.2 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)
295
-
-
... More
1.27.3 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.4 Module (125mmX75mm)
6
-
-
... More
1.27.4 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)
108
-
-
... More
1.27.5 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm)
10
-
-
... More
1.27.6 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.12 Module (200mmX150mm)
16
-
-
... More
1.31 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or inrecess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 ampsmodular switch, connection etc. as required. (For light plugs to be used in non residentialbuildings).
310
-
-
... More
1.32 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
95
-
-
... More
1.34 : Supplying and fixing brass batten/ angle holder including connection etc. as required.
3
-
-
... More
od92157/2019_2020 : Supply, installation, testing and commissioning of 450mm wall fan with necessary bolt and nuts, etc. as required including giving connections with required length of 16/0.20mm pvc insulated and PVC sheathed 3 core round copper conductor flex wire confirming to relevant IS
4
-
-
... More
od92160/2019_2020 : Supplying of Ceiling Fan 1200mm Sweep complete with 300mm down rod, canopies, shackles and blades and without regulator working on 230/240V Single phase AC;
93
-
-
... More
od92162/2019_2020 : Supplying of Ceiling Fan 900mm Sweep complete with 300mm down rod, canopies, shackles and blades and without regulator working on 230/240V Single phase AC, 5star rated;
2
-
-
... More
1.44 : Installation, testing and commissioning of ceiling fan, including wiring the down rods of standardlength (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc.as required.
95
-
-
... More
1.47 : Supplying and fixing extra down rod of 10 cm length G.I. pipe, 15 mm dia, heavy gauge including painting etc. as required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
50
-
-
... More
1.49 : Numbering of ceiling fan / exhaust fan/ fluorescent fittings as required.
96
-
-
... More
od92167/2019_2020 : Supplying of Exhaust Fan 450mm working on 230/240V Single phase AC;
4
-
-
... More
1.50.1 : Installation of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required.Upto 450 mm sweep
4
-
-
... More
od92168/2019_2020 : Ductable Circular Inline Exhaust fan;
8
-
-
... More
od92169/2019_2020 : Wiring for 3 light point/fan/exhaust/fan point/call bell point(without independent switch etc) with 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed PVC conduit,and earthing the point with 1.5Sqmm FRLS PVC insulated copper conductor single core cable etc as required.;
52
-
-
... More
1.55.2 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group B
64
-
-
... More
od92170/2019_2020 : "Wiring for light point/ fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with 6A modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required ;";;5 lights controled by one switch;
3
-
-
... More
od92171/2019_2020 : "Wiring for light point/ fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with 6A modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required ;";;4 lights controled by one switch;;
9
-
-
... More
od92172/2019_2020 : "Wiring for light point/ fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with 6A modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required "6 lights controled by one switch;;
3
-
-
... More
1.56 : Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light plugs to be used in non residential buildings).
95
-
-
... More
1.57 : Supplying & fixing suitable size Gl box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. lCD
40
-
-
... More
2.3.2 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door
7
-
-
... More
2.3.4 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator16 way, Double door
2
-
-
... More
od92173/2019_2020 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) ;4 way (4 + 12), Double door;
3
-
-
... More
od92174/2019_2020 : Supplying and fixing following way, horizontal type three pole and neutral, sheet;steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned;copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator);6 way (4 + 18), Double door
6
-
-
... More
od92175/2019_2020 : Supplying and fixing of following ways surface/ recess mounting, vertical type, 415;volts, TPN MCB distribution board of sheet steel, dust protected, duly powder;painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth;bar, din bar for mounting MCB’s (but without MCB’s and incomer ) as required .;(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.);8 way (4 + 24), Double door
10
-
-
... More
od92176/2019_2020 : Supplying and fixing of following ways surface/ recess mounting, vertical type, 415;volts, TPN MCB distribution board of sheet steel, dust protected, duly powder;painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth;bar, din bar for mounting MCB’s (but without MCB’s and incomer ) as required .;(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.);4 way (4 + 12), Double door
5
-
-
... More
2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
325
-
-
... More
2.10.2 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole and netural
11
-
-
... More
2.10.3 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole
3
-
-
... More
od92177/2019_2020 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.;Triple pole and neutral 63A;;
11
-
-
... More
2.11 : Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
105
-
-
... More
2.12.1 : Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
9
-
-
... More
2.13.1 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
9
-
-
... More
2.13.2 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps
5
-
-
... More
2.13.3 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.100 amps
9
-
-
... More
od92178/2019_2020 : "Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as;required";16A;
6
-
-
... More
od102858/2019_2020 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts;residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes;in the existing MCB DB complete with connections, testing and commissioning etc.;as required.;25 A
3
-
-
... More
od102859/2019_2020 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc.;63 amps. rating, 4 pole RCCB, 30 mA
5
-
-
... More
od92179/2019_2020 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc.;415V 32A 4P RCCB 30mA;;
2
-
-
... More
od92180/2019_2020 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc.;415V 16A 4P RCCB 30mA;
5
-
-
... More
od92181/2019_2020 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc.;415V 100A 4P RCCB 100mA
5
-
-
... More
2.16 : Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.
1
-
-
... More
2.17 : Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32amps 415volts "C" curve TP MCB complete with connections, testing and commissioning etc. as required.
1
-
-
... More
od92182/2019_2020 : Supply and fixing 32 Amps 240V, SPN industrial type socket outlet with 2 pole and earth, metal enclosed plug top alongwith 32 amps "c" curve SP MCB in sheet steel enclosure on surface or in recess with chained metal cover for the socket out let and complete with connections, testing and commissioning etc., as required;32A 240V, SPN Industrial type Socket;
11
-
-
... More
od92183/2019_2020 : Supply and fixing 63 Amps 415V, TPN industrial type socket outlet with 4 pole and earth, metal enclosed plug top alongwith 63 amps "c" curve TPN MCB in sheet steel enclosure on surface or in recess with chained metal cover for the socket out let and complete with connections, testing and commissioning etc., as required;63A 415V, TPN Industrial type Socket;
11
-
-
... More
2.21 : Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
11
-
-
... More
od92184/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc.;LED Panel light 12 W LED 4000 K, surface mounted, square fitting with control driver etc.;
10
-
-
... More
od92185/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc.;LED Panel light 18 W LED 4000 K, surface mounted, square fitting with control driver etc.;;
128
-
-
... More
od92186/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc.;LED Panel light 6 W LED 4000 K, surface mounted, round fitting ultra slim with control driver etc.;6W LED 4000K ;
61
-
-
... More
od92187/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc.;LED Panel light 12 W LED 4000 K, surface mounted, round fitting ultra slim with control driver etc.;
98
-
-
... More
od92188/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc.;LED Panel light 24 W LED 4000 K, surface mounted, round fitting ultra slim at height 14mm or nearest with control driver etc.;
25
-
-
... More
od92189/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc.;Surface and wall mounted LED batten extruded aluminium housing provided for efficient heat dissipation with poly carbonate diffuser & integrated electronic driver with lamp 20 W LED 6500 K ;
7
-
-
... More
od92190/2019_2020 : Supply and fixing of Surface and wall mounted LED batten extruded aluminium housing provided for efficient heat dissipation with poly carbonate diffuser & integrated electronic driver with lamp 10 W LED 6500 K ;
4
-
-
... More
od92191/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc.;Aesthetically designed 34W or nearest LED cool day light flat panel for surface mounting which provides soft light and glare free symetrical illumination , 600x600x70mm size, 6500K or nearest;;
25
-
-
... More
od92192/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc.;energy saving surface mounted, decorative oval 10W bulk head edge-lit LED luminaire comprising of high brightness LEDs with IP65 protection, LED warm light;
62
-
-
... More
od92193/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc.;Energy saving medium bay 80W LED, Warm light with IP65 luminiare with high efficiency, Circular fitting;
55
-
-
... More
od92194/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc.;energy saving 48W or nearest watts LED STREET LIGHT MADE OF PRESSURE DIE CAST ALUMINIUM housing lighting source and lens embedded PC cover having TOP opening separate driver compartment with IP66 protection and impact resistance of IK07.Suitable for pole dia 45mm maximum. 5000K or nearest;
6
-
-
... More
od92195/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc.;Gate light 20W LED lamp designed with symmetrically light distributed, spun aluminium luminiare with high power LED light source suitable for pole dia 75mm or nearest;
2
-
-
... More
od92196/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc.;energy saving 25W or nearest watts LED STREET LIGHT MADE OF PRESSURE DIE CAST ALUMINIUM housing lighting source and lens embedded PC cover having TOP opening separate driver compartment with IP66 protection and impact resistance of IK07.Suitable for pole dia 45mm maximum.5000K or nearest;
19
-
-
... More
od92197/2019_2020 : Flood light supply and fixing of Energy saving IP65 flood light luminaire with high power COB LED as light source. 30W LED 5000K or nearest;
3
-
-
... More
od92198/2019_2020 : Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc.;Bollard Lamp fitting IP65 energy saving aluminium landscape luminiare for diffused lighting with 8W LED Light source of height 1m , LED Warm light;
15
-
-
... More
od92199/2019_2020 : Fabricating, supplying and erection of 6 Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 180kmph for 6 Mtrs pole having dimensions bottom 130mm, top 70mm with 3mm thick, 220mmx220x12mm base plateS and 4Nos of M20x600mm long J bolts along with template and the pole shall be galvanized with not less than 65micron etc..;;above specification with Single arm bracket including fixing the lamp and giving connection using suitable size 3 core copper round cable etc complete;
19
-
-
... More
od92200/2019_2020 : Fabricating, supplying and erection of 6 Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 180kmph for 6 Mtrs pole having dimensions bottom 130mm, top 70mm with 3mm thick, 220mmx220x12mm base plate and 4Nos of M20x600mm long J bolts along with template and the pole shall be galvanized with not lessabove specification with ;Double arm bracket including fixing the lamp and giving connection using suitable size 3 core copper round cable etc complete; than 65micron etc..;
6
-
-
... More
11.6.2 : Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation
(during casting) for cable entry including bending the pipe to the required shape complete as required.40 mm dia
225
-
-
... More
15.1 : Supplying,Installation, testing and commissioning of Passive Infrared (PIR) technology based occupancy sensor having high preformance, non regulating programmable type, suitable for connected load upto 10 Amp, for mounting height up to 2.8 Mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming and site etc. complete as required
35
-
-
... More
1.35 : Erection of wall bracket / ceiling fittings of all sizes and shapes containing upto two GLS lamps per fitting, complete with all accessories including connection etc. as required.
555
-
-
... More
od92201/2019_2020 : Installation of Gate light, Bollad fittings, Flood light fittings including providing necessary accessories and giving connection using suitable size 3core cable;
19
-
-
... More
od92202/2019_2020 : Providing and fixing plain 16/0.20 mm (0.50 sq.mm) 3 Core circular flexible FRLS PVC insulated, PVC sheathed copper conductor cable direct on the wall with PVC clips etc. as required;
50
-
-
... More
1.51 : Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes
4
-
-
... More
1.33 : Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden blockincluding connection etc as required.
440
-
-
... More
1.43 : Providing and fixing extra conduit down rod of 20 mm dia, 2X10 cm length wiring with 2 X1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable including painting etc. as required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
92
-
-
... More
od92203/2019_2020 : Supply and clamping the following size of corrugated pvc flexible conduit with necessary compression gland with locking ring and checknut at termination pointed using suitable size GI/MS saddle spacing not exceeding 60 cm on surface including making good the damages, color wasing etc as required.;20mm dia;
155
-
-
... More
od92204/2019_2020 : Supply and clamping the following size of corrugated pvc flexible conduit with necessary compression gland with locking ring and checknut at termination pointed using suitable size GI/MS saddle spacing not exceeding 60 cm on surface including making good the damages, color wasing etc as required.;25mm dia
55
-
-
... More
od92205/2019_2020 : Supply and installation of suitable size stainless steel Rod type fan clamp as per IS 732;
100
-
-
... More
od102688/2019_2020 : ;Supply of XLPE insulated armoured cables with aluminium conductors for working voltages up to and including 1100V conforming to IS 1554 part I 1988 for PVC and IS 7098 Part I for XLPE.;4C x 4Sq. mm- ;;;
50
-
-
... More
od102689/2019_2020 : ;Supply of XLPE insulated armoured cables with aluminium conductors for working voltages up to and including 1100V conforming to IS 1554 part I 1988 for PVC and IS 7098 Part I for XLPE.;2C x 4Sq. mm- ;;
50
-
-
... More
od102690/2019_2020 : ;Supply of XLPE insulated armoured cables with aluminium conductors for working voltages up to and including 1100V conforming to IS 1554 part I 1988 for PVC and IS 7098 Part I for XLPE.;4C x 6Sq. mm- ;;
50
-
-
... More
od102691/2019_2020 : ;Supply of XLPE insulated armoured cables with aluminium conductors for working voltages up to and including 1100V conforming to IS 1554 part I 1988 for PVC and IS 7098 Part I for XLPE.;4C x 10Sq. mm-;;
50
-
-
... More
od102736/2019_2020 : Supply of XLPE insulated armoured cables with aluminium conductors for working voltages up to and including 1100V conforming to IS 1554 part I 1988 for PVC and IS 7098 Part I for XLPE.;4C x 25Sq. mm
50
-
-
... More
od102692/2019_2020 : ;Supply of XLPE insulated armoured cables with aluminium conductors for working voltages up to and including 1100V conforming to IS 1554 part I 1988 for PVC and IS 7098 Part I for XLPE.;3.5C x 50Sq. mm- ;;;
70
-
-
... More
od102693/2019_2020 : ;Supply of XLPE insulated armoured cables with aluminium conductors for working voltages up to and including 1100V conforming to IS 1554 part I 1988 for PVC and IS 7098 Part I for XLPE.;3.5C x 70Sq. mm- ;;
65
-
-
... More
od102752/2019_2020 : Supply of XLPE insulated armoured cables with aluminium conductors for working voltages up to and including 1100V conforming to IS 1554 part I 1988 for PVC and IS 7098 Part I for XLPE.;3.5C x 150Sq. mm;;;
20
-
-
... More
od102694/2019_2020 : ;Supply of XLPE insulated armoured cables with aluminium conductors for working voltages up to and including 1100V conforming to IS 1554 part I 1988 for PVC and IS 7098 Part I for XLPE.;3.5C x 185Sq. mm;;;
400
-
-
... More
7.5.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of
following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm
10
-
-
... More
7.5.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of
following size in the existing RCC/ HUME/ METAL pipe as required.Above 35 sq. mm and upto 95 sq. mm
15
-
-
... More
7.5.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of
following size in the existing RCC/ HUME/ METAL pipe as required.Above 95 sq. mm and upto 185 sq. mm
10
-
-
... More
7.7.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV
grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
40
-
-
... More
7.7.2 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV
grade of following size on wall surface as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
10
-
-
... More
7.8.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV
grade of following size on cable tray as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
490
-
-
... More
7.8.2 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV
grade of following size on cable tray as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
166
-
-
... More
7.8.3 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV
grade of following size on cable tray as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
35
-
-
... More
9.1.22 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm)
20
-
-
... More
9.1.23 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm)
2
-
-
... More
9.1.27 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)
10
-
-
... More
9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)
8
-
-
... More
9.1.34 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm)
14
-
-
... More
od92206/2019_2020 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1Kv grade as required.;4C x 6Sq. mm- ;
2
-
-
... More
od92207/2019_2020 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1Kv grade as required.;4C x 4Sq. mm- ;
2
-
-
... More
od92208/2019_2020 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1Kv grade as required. 2C x 4Sq. mm- ;
18
-
-
... More
od92209/2019_2020 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron;cable tray cable tray with perforation not more than 17.5%, in convenient sections;joined with connectors, suspended from the ceiling with G.I. suspenders including;G.I. bolts & nuts, etc as required.;150 mm width X 50 mm depth X 1.6 mm thickness;
260
-
-
... More
od92210/2019_2020 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron;cable tray cable tray with perforation not more than 17.5%, in convenient sections;joined with connectors, suspended from the ceiling with G.I. suspenders including;G.I. bolts & nuts, etc as required.;300 mm width X 50 mm depth X 1.6 mm thickness;
50
-
-
... More
od92211/2019_2020 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray cable tray with perforation not more than 17.5%, in convenient sections,joined with connectors, suspended from the ceiling with G.I. suspenders including;G.I. bolts & nuts, etc as required.;450 mm width X 50 mm depth X 2.0 mm thickness
15
-
-
... More
od92212/2019_2020 : Providing, Fixing, Laying, Testing and Commissioning of the following 1.1KV Grade PVC Insulated Armoured Copper Control Cables (YWY/YFY) through excavated trenches, built up cable trenches, cable trays, hume pipes as necessary and including supply of all materials for clamping, cable route markers, identification tags and clamping at intervals.;10C X 2.5 sq mm cu cable
20
-
-
... More
od92213/2019_2020 : Providing, Fixing, Laying, Testing and Commissioning of the following 1.1KV Grade PVC Insulated Armoured Copper Control Cables (YWY/YFY) through excavated trenches, built up cable trenches, cable trays, hume pipes as necessary and including supply of all materials for clamping, cable route markers, identification tags and clamping at intervals.;4C X 2.5 sq mm Cu cable;;
50
-
-
... More
od92214/2019_2020 : Providing, Fixing, Laying, Testing and Commissioning of the following 1.1KV Grade PVC Insulated Armoured Copper Control Cables (YWY/YFY) through excavated trenches, built up cable trenches, cable trays, hume pipes as necessary and including supply of all materials for clamping, cable route markers, identification tags and clamping at intervals.;3C X 2.5 sq mm Cu cable;
35
-
-
... More
od92215/2019_2020 : Providing, Fixing, Laying, Testing and Commissioning of the following 1.1KV Grade PVC Insulated Armoured Copper Control Cables (YWY/YFY) through excavated trenches, built up cable trenches, cable trays, hume pipes as necessary and including supply of all materials for clamping, cable route markers, identification tags and clamping at intervals.;2C X 2.5 sq mm Cu cable;
30
-
-
... More
od92216/2019_2020 : Providing and Fixing of all materials and termination of the following 1.1 KV Grade PVC Insulated Armoured Copper Control Cables (AYWY / AYFY) using single compression type cadmium plated brass cable glands, Copper crimped type cable lugs, cable identification tags and including gland and armour earthing using copper conductor of adequate size etc.;10C X 2.5 sq mm cu cable;
8
-
-
... More
od92217/2019_2020 : Providing and Fixing of all materials and termination of the following 1.1 KV Grade PVC Insulated Armoured Copper Control Cables (AYWY / AYFY) using single compression type cadmium plated brass cable glands, Copper crimped type cable lugs, cable identification tags and including gland and armour earthing using copper conductor of adequate size etc.;4C X 2.5 sq mm Cu cable;
10
-
-
... More
od92218/2019_2020 : Providing and Fixing of all materials and termination of the following 1.1 KV Grade PVC Insulated Armoured Copper Control Cables (AYWY / AYFY) using single compression type cadmium plated brass cable glands, Copper crimped type cable lugs, cable identification tags and including gland and armour earthing using copper conductor of adequate size etc.;3C X 2.5 sq mm Cu cable;
8
-
-
... More
od92219/2019_2020 : Providing and Fixing of all materials and termination of the following 1.1 KV Grade PVC Insulated Armoured Copper Control Cables (AYWY / AYFY) using single compression type cadmium plated brass cable glands, Copper crimped type cable lugs, cable identification tags and including gland and armour earthing using copper conductor of adequate size etc.;2C X 2.5 sq mm Cu cable;
8
-
-
... More
od102772/2019_2020 : Supply and fixing of 100X50mm cable management system on wall with all accessories like bodies, cover, joints, angles, end caps, plates, bends,elbows,base and lids, partitions with hardware kits etc as required.;
50
-
-
... More
od102789/2019_2020 : Main Switch Board (MSB);Supply, Installation, Testing & Commissioning of Main Switch Board (MSB) , cubicle type, made out of 1.6mm thick CRCA sheet,totally enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications.The panel shall be with Top/bottom entry to receive incoming & outgoing cable;;EB SIDE;Incomer ;400A, FP 36KA MCCB Having islation duty with 3O/C+1E/F Release SET AT 333A - 1 No;400A 36KA 4P Contactor - 1No;Instruments(incomer);2A MCB - 3 Nos.;RYB indication lamp, LED type - 1set;(0-500)V voltmeter, Acc. class 1 with 90 deg defl. scale - 1Nos.;(0-400)A ammeter Acc. class 1 with 90 deg defl. scale - 3Nos.;400/5A 15VA class 1 resin cast CT -1set;3 pole voltmeter selector switch - 1No.;Surge Protection Device-1No;Class B/Class 1 as per IEC 61643(IP 20) ;DG SIDE;Incomer ;250A 4P,36KA MCCB - 1 No;255A 36KA 4P Contactor-1No.;Instruments(incomer);2A MCB - 3 Nos.;RYB indication lamp, LED type - 1set;(0-500)V voltmeter, Acc. class 1 with 90 deg defl. scale - 1Nos.;(0-250)A ammeter Acc. class 1 with 90 deg defl. scale - 3Nos.;250/5A 15VA class 1 resin cast CT -1set;3 pole voltmeter selector switch - 1No.;Digital Multi function meter with Acc Cl1 with RS485 communication -1no.;400A 36KA 4P ATS-1No;AMF relay - 1No.;Buscoupler;400A 4P Contactor-1No;Busbar;400A ,36kA TPN busbar chamber with Aluminium busbar;Outgoings;200A,TPN, 36kA, MCCB set at 160A adjustable thermal magnetic release with OL & SC protection, with RS 485 communication facility - 3Nos;200A,TPN, 36kA, MCCB adjustable thermal magnetic release with OL & SC protection, with RS 485 communication facility - 1No;125A,TPN, 36kA, MCCB set at 100A adjustable thermal magnetic release with OL & SC protection, with RS 485 communication facility - 1No;100A,TPN, 25kA, MCCB with adjustable thermal magnetic release with OL & SC protection, with RS 485 communication facility - 2Nos;80A,TPN, 36kA, MCCB set at 65A adjustable thermal magnetic release with OL & SC protection, with RS 485 communication facility - 1Nos;63A TPN Isolator-1No;
1
-
-
... More
od102790/2019_2020 : Supply, Installation, Testing & Commissioning of LIGHT panel , cubicle type, made out of 1.6mm thick CRCA sheet,totally enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications.;The panel shall be with Top/bottom entry to receive incoming & outgoing cable;Incomer ;63A TPN 25KA MCCB- 1 No;Instruments(incomer);2A MCB - 6 nos;RYB indication lamp, LED type - 2 set;Digital Multi function meter with Acc Cl1 with RS485 communication -1no.;Busbar;63A TPN busbar chamber with Aluminium busbar;Outgoings;32A TPN 10KA MCB. - 1No.;25A TPN 10KA MCB. - 2Nos;16A TPN 10KA MCB. - 4No's;16A SPN 10KA MCB. - 5Nos;
1
-
-
... More
od102791/2019_2020 : POWER PANEL 1;Supply, Installation, Testing & Commissioning of POWER panel 1 , cubicle type, made out of 1.6mm thick CRCA sheet,totally enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications.;;The panel shall be with Top/bottom entry to receive incoming & outgoing cable;Incomer ;160A TPN 25KA, MCCB- 1 No;Instruments(incomer);2A MCB - 6 nos;RYB indication lamp, LED type - 2 set;Digital Multi function meter with Acc Cl1 with RS485 communication -1no.;Busbar;160A TPN busbar chamber with Aluminium busbar;Outgoings;63A,TPN, 25kA, MCCB adjustable thermal magnetic release with OL & SC protection, - 7Nos;
1
-
-
... More
od102792/2019_2020 : POWER PANEL 2;Supply, Installation, Testing & Commissioning of POWER panel 2 ,cubicle type, made out of 1.6mm thick CRCA sheet,totally enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications.;;The panel shall be with Top/bottom entry to receive incoming & outgoing cable;Incomer ;160A TPN 25KA MCCB- 1 No;Instruments(incomer);2A MCB - 6 nos;RYB indication lamp, LED type - 2 set;Digital Multi function meter with Acc Cl1 with RS485 communication -1no.;Busbar;160A TPN busbar chamber with Aluminium busbar;Outgoings;100A,TPN, 25kA, MCCB adjustable thermal magnetic release with OL & SC protection, - 5Nos;63A TPN 25KA MCCB-2Nos;
1
-
-
... More
od102793/2019_2020 : POWER PANEL 3;Supply, Installation, Testing & Commissioning of POWER panel 3 , cubicle type, made out of 1.6mm thick CRCA sheet,totally enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc including following components as per drawing and technical specifications.;The panel shall be with Top/bottom entry to receive incoming & outgoing cable;Incomer ;160A TPN 25KA MCCB- 1 No;Instruments(incomer);2A MCB - 6 nos;RYB indication lamp, LED type - 2 set;Digital Multi function meter with Acc Cl1 with RS485 communication -1no.;Busbar;160A TPN busbar chamber with Aluminium busbar;Outgoings;125A,TPN, 25kA, MCCB adjustable thermal magnetic release with OL & SC protection, - 1No.;100A,TPN, 25kA, MCCB adjustable thermal magnetic release with OL & SC protection, - 4Nos;63A TPN 25KA MCCB-2Nos;ocess etc., including following components as per drawing and technical specifications.;;
1
-
-
... More
od102794/2019_2020 : UPS PANEL;Supply, Installation, Testing & Commissioning of UPS PANEL , cubicle type, made out of 1.6mm thick CRCA sheet,totally enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications.;;The panel shall be with Top/bottom entry to receive incoming & outgoing cable;Incomer ;63A TPN 25KA MCCB- 1 No;Instruments(incomer);2A MCB - 6 nos;RYB indication lamp, LED type - 2 set;Digital Multi function meter with Acc Cl1 with RS485 communication -1no.;Busbar;63A TPN busbar chamber with Aluminium busbar;Outgoings;25A TPN 10KA MCB - C curve-6Nos;
1
-
-
... More
od102795/2019_2020 : EQUIPMENT PANEL;Supply, Installation, Testing & Commissioning of EQUIPMENT PANEL , cubicle type, made out of 1.6mm thick CRCA sheet,totally enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank The panel shall be with Top/bottom entry to receive incoming & outgoing cable;Incomer ;63A TPN 25KA MCCB- 1 No;Instruments(incomer);2A MCB - 6 nos;RYB indication lamp, LED type - 2 set;Digital Multi function meter with Acc Cl1 with RS485 communication -1no.;Busbar;63A TPN busbar chamber with Aluminium busbar;Outgoings;63A TPN 25KA MCCB-2Nos;40A TPN MCB-1No;25A TPN MCB - 3Nos;16A TPN MCB-2Nos;process etc., including following components as per drawing and technical specifications.;;
1
-
-
... More
od102796/2019_2020 : SITC of PUMP VDB;Incomer;63A TPN 25KA MCCB- 1 No;BUSBARS;63A TPN busbar chamber with Aluminium busbar;INSTRUMENTS;RYB indication lamp, LED type - 1 set;OUTGOING;25A 4P MCB with DOL Starters for 3HP motors and on/off indication lamps with change over switches -1No;10A DP MCB with DOL Starters for 1.5HP motors and on/off indication lamps with change over switches -1No;16A 4P MCB -2Nos.;
1
-
-
... More
od102797/2019_2020 :SITC of Lift DB;Incomer;63A FP Isolator;Outgoing:-;40A 4P RCBO 100mA -1No.;25A DP RCBO 30mA-1No with 4nos of 6A SP MCB;Busbar:;1 Set TPN AL bus bars suitably rated for 63A;
1
-
-
... More
od102798/2019_2020 : Automatic Power Factor Correction (APFC) Panel;Supply, Installation, Testing & Commissioning of Automatic Power Factor Correction (APFC) Panel, cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42 form 4b, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications.;Incomer;200A TPN Isolator - 1 no;Instruments(incomer);2A, C curve SP MCB - 3 nos.;RYB indication lamp, LED type - 3 nos.;(0-500)V voltmeter, Acc. class 1 with 90 deg defl. scale - 1 no.;(0-200)A ammeter Acc. class 1 with90 deg defl. scale - 1 no.;6A 3 pole voltmeter selector switch - 1 no.;6A 3 pole ammeter selector switch - 1 no.;200/5A 15VA class 1 resin cast CT - 3nos;200A TPN busbar chamber with Aluminium busbar.;Microprocessor based intelligent, 8 step IPFC relay with PF display - 1 No.;Auto / manual selector switch - 1 nos.;Out Going;40A, 18kA, TPN MCCB with adjustable thermal magnetic release with OL & SC protection. 7nos.;63A, 18kA, TPN MCCB with adjustable thermal magnetic release with OL & SC protection. 1no.;25 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type)- 1 No.;10 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type)- 3 Nos.;10 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type) with fixed type- 1No.;15 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type)- 1 No.;
1
-
-
... More
od102799/2019_2020 : SITC of INVERTER VDB;Incomer;63A TPN MCB Isolator-1No;BUSBARS;63A TPN busbar chamber with Aluminium busbar;INSTRUMENTS;RYB indication lamp, LED type - 1 set;OUTGOING;16A SPN MCB 10KA-4Nos;
1
-
-
... More
Supply & Providing maintenance free earthing arrangement to carry fault current with 250 microns molecularly copper bonded solid high carbon steel rod of diameter 20mm and minimum length 3 Meters (1 meters*3) tested for 10/350 micro second wave form , stainless steel connectors and fasteners for connecting electrode with earthing conductor/strip with earth enhancing mineral compound is recommended as per above mentioned standards. The electrode shall be hand driven or hammered in to earth for soft soil and drilling for rocky and hard soil. Including providing test joint,Cast Iron company make inspection chamber etc complete as per relevant standards. (4 nos for system and 3 nos for lightning arrestor, 3 nos for DG)
4
-
-
... More
od92232/2019_2020 : Providing, Fixing, Laying & Clamping at site of Copper earthing conductors inclusive of providing earthing terminations and bracing of the terminations etc.;14 SWG Copper wire.;;
500
-
-
... More
od92233/2019_2020 : Providing, Fixing, Laying & Clamping at site of Copper earthing conductors inclusive of providing earthing terminations and bracing of the terminations etc.;10 SWG Copper wire.;
1850
-
-
... More
od92234/2019_2020 : Providing, Fixing, Laying & Clamping at site of Copper earthing conductors inclusive of providing earthing terminations and bracing of the terminations etc.;8 SWG Copper wire.;
165
-
-
... More
od92235/2019_2020 : Providing, Fixing, Laying & Clamping at site of Copper earthing conductors inclusive of providing earthing terminations and bracing of the terminations etc.;6 SWG Copper wire.;
85
-
-
... More
od92236/2019_2020 : Providing, Fixing, Laying & Clamping at site of Copper earthing conductors inclusive of providing earthing terminations and bracing of the terminations etc.;25x3 earth bunch;
25
-
-
... More
od92237/2019_2020 : Supply and providing copper sockets for the below mentioned copper earth leads etc complete;6 SWG Copper wire.;
22
-
-
... More
od92238/2019_2020 : Supply and providing copper sockets for the below mentioned copper earth leads etc complete;8 SWG Copper wire.;
30
-
-
... More
od92239/2019_2020 : Supply and providing copper sockets for the below mentioned copper earth leads etc complete;10 SWG Copper wire.;
30
-
-
... More
od92240/2019_2020 : Supply and providing copper sockets for the below mentioned copper earth leads etc complete;14 SWG Copper wire.;
70
-
-
... More
od92241/2019_2020 : Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required;25 x 6 mm brass bolt & nut;;
40
-
-
... More
od92242/2019_2020 : Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required;12 x 3 mm brass bolt & nut;
60
-
-
... More
od92243/2019_2020 : Supply installation testing and commissioning of Hi wall mounted inverted type 3 star split Air Conditioner with Energy efficient Compressor and wireless Remote control,Clamps for fixing condenser on wall ,copper pipping upto 5 metre in between evaporator and condensor units. etc complete Remote control unit to be fixed on wall. 2.0TR with 5 KVA Voltage Stabilizer having intellegent time delay,use only copper pipes in bewteen condenser unit and room unit etc complete ( 1 no. for ASAP OFFICE, 5 Nos. for IT Room, 2Nos for server room);
8
-
-
... More
od92244/2019_2020 : Extra length for copper refrigerant piping for the above installation IF exceeds 5 METRE PER UNIT;
50
-
-
... More
od92245/2019_2020 : Extra length for Water drain piping for the above installation IF exceeds 5 METRE PER UNIT;
50
-
-
... More
od92246/2019_2020 : Cyclic digital timer working on 230v 50HZ AC for operating the airconditioners alternatevly in at an interval of 3 hours in the server room;
2
-
-
... More
od92247/2019_2020 : ";Supply,Installation ,testing,commissioning of following Inverter with Battery and all other accessories and all connections etc complete.";
1
-
-
... More
od92248/2019_2020 : MISCELLANEOUS ITEMS.;Providing and Fixing of 5KG Dry Chemical Powder type (DCP) fire extinguishers having ISI mark along with mounting supports.;
1
-
-
... More
od92249/2019_2020 : Providing and Fixing of Electrical ISI Grade Rubber Mat suitable for 440Volts Switchboards. (6' x 3' x 1/4").;
2
-
-
... More
od92250/2019_2020 : Providing and Fixing of Electrical ISI Grade Rubber Mat suitable for 11000Volts Switchboards. (6' x 3' x 1/2").;
1
-
-
... More
od92251/2019_2020 : Provide and Fixing of Electrical Grade rubber hand gloves suitable for operation of 11KV Switchgear.;
1
-
-
... More
od92252/2019_2020 : Provide and Fixing of 2 Nos fire buckets along with stand painted with enamel paint of red colour.;
2
-
-
... More
od92253/2019_2020 : Provide and Fixing of L.T./H.T danger sign boards.;
1
-
-
... More
od92254/2019_2020 : Providing andFixing of emergency OFF trip push button with front Glass and painted in RED Colour.;
1
-
-
... More
ELECTRICAL HT
-
-
-
... More
od92087/2019_2020 : RMU;Supply, Installation, testing and commissioning of 11KV electrically Operated 21kA for 3 sec, 630A SF6 Insulated,Ring Main Unit outdoor type (IP-54) with 2 nos motorized Load Break Switch as incomer and 1 no motorized VCB (fully rated earth switch) with fully encapsulated vacuum interrupter panel, 630 Amp continously rated Cu busbar complete with all accessories, protective relays, indicators, Hooter ,battery and battery charger, Manometer for indicating SF6 gas pressure with green zone marked on the scale,provision for padlocking for open, close, earth and test position etc. on a suitable foundation. The RMU must be both side extensible type. The rate quoted shall be inclusive of all the civil works and hoisting to its location,assembling of units,lining up, bolting the units and checking all control wiring. ;
1
-
-
... More
8.1.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of
following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 120 sq. mm and upto 400 sq. mm
125
-
-
... More
od92102/2019_2020 : Supply of 11KV stranded compact circular aluminium conductor, conductors screened with extruded semi conducting compound XLPE insulated, insulation screened with extruded semi conducting compound in combination with copper tape (0.3 kA for 1 sec.), cores laid up, inner sheath of PVC tape, galvanized steel flat strip armoured, and overall PVC sheathed cable conforming to IS 7098/11/85 with latest amendments & confirming to the GTP of Group A ;3C - 300 Sq.mm(from RMU to transformer);
35
-
-
... More
od92105/2019_2020 : Supply of 11KV stranded compact circular aluminium conductor, conductors screened with extruded semi conducting compound XLPE insulated, insulation screened with extruded semi conducting compound in combination with copper tape (0.3 kA for 1 sec.), cores laid up, inner sheath of PVC tape, galvanized steel flat strip armoured, and overall PVC sheathed cable conforming to IS 7098/11/85 with latest amendments & confirming to the GTP of Group A ; 3C - 300 Sq.mm ( upto RMU) ;
10
-
-
... More
10.1.4 : Supplying and making indoor cable end jointing with cast resin compound, including lugs and other jointing materials, for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:300 sq. mm
2
-
-
... More
10.2.4 : Supplying and making outdoor cable end jointing with cast resin compound, including lugs and other jointing materials, for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:300 sq. mm
2
-
-
... More
8.3.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of
following size in the existing RCC/ HUME/ METAL pipe as required.Above 120 sq. mm and upto 400 sq. mm
68
-
-
... More
7.10 : Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate withinscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixingthe same in ground as required.
17
-
-
... More
od92120/2019_2020 : PLATE EARTH STATION;Provide and Fixing of all materials for plate earth station with 1200 x 1200 x 12.5mm. C.I. plate earth electrode, water pipe, earthing strips, clamps, funnel, terminal Electrodes etc., excavation in all classes of soil, filling with alternate layers of charcol and salt and back filling, construction of Earthpit Inspection Chamber and Heavy duty C.I. Chequered plate for Earthpit Inspection Chamber cover. The Earthing Station should conform to IS 3043/1987.;
6
-
-
... More
od92121/2019_2020 : EARTHING CONDUCTORS.;Providing, Fixing, Laying & Clamping at site of Copper earthing conductors inclusive of providing earthing terminations and bracing of the terminations etc.;25x3mm Copper Strip.;
275
-
-
... More
od92124/2019_2020 : Providing, Fixing, Laying & Clamping at site of Copper earthing conductors inclusive of providing earthing terminations and bracing of the terminations etc.;4SWG Copper wire.;
20
-
-
... More
od92126/2019_2020 : Providing, Fixing, Laying & Clamping at site of Copper earthing conductors inclusive of providing earthing terminations and bracing of the terminations etc.;25x3 earth bunch;
20
-
-
... More
od92129/2019_2020 : TRANSFORMER;Supply, installation, testing and commissioning of indoor type Unitized Substation enclosure consisting of 11 KV, 630A 250kVA, 11kV/433V 3 Ph, 50 Hz,11KV Load break SFU 400Amps, 350MVA with 24V dc Tripping with Accessories vector Dyn -11, dry type, Transformer with IP23 and G.I enclosure, winding temperature alarm and trip on transformer compartment and LV chamber suitable for termination of cable, complete with all standard fittings and accessories etc including necessary louvers and as per specifications attached in all respects as required. It shall includes all necessary control cabling for alarm, tripping & indication, all internal cabling as required. The rate shall be inclusive of all materials, lead, lift, necessary civil works etc. complete as per single line diagram & technical specification;
1
-
-
... More
od92132/2019_2020 : "METERING CUBICLE WITH 1 NO LBS OUT GOING PANEL;SITC 11 KV, 3PH, 50HZ outdoor weather proof cubicle comprising 11KV CTs of suitable ratio and 11000/110V PT with MD (KW)meter,KWH meter and KVA meter. The unit shall have provision for sealing and shall be provided with acrylic window to facilitate reading the meter.Out going shall have On Load Air Break switch with Fuse Trip mechanism, 3P, 630A, 12KV, 18.4KA, 350MVA and HRC fuses with tripping striker pin The GA drawing shall be got approved by KSEB authorities before fabrication. The cubicle shall be made out of 16SWG MS sheet. The unit shall be mounted on PCC pedestal, Aluminium busbar, suitable rating 3 Phase,Air insulated with heat shrinkable sleeves - 1set, Earth 25x3 mm Tin coated copper busbar - 1set, Busbar supports resin cast with 11KV die electric and mechanical strength - 1 set, All other components shall be as per drawing and specification complete as per KSEB approved.";
1
-
-
... More
od92134/2019_2020 : "Preparation of all drawings submitting and getting approval from Electrical Inspectorate, submitting of Completion certificates and arranging inspection, getting sanction and energisation certificates from Electrical Inspectorate & KSEB, obtaining power allocation & power connection etc. for commissioning of the whole installation in the premises including generator, Lift panel etc. All statutory payments will be reimbursed on production of the original receipts. (for modification works);";
1
-
-
... More
od92135/2019_2020 : LIGHTNING PROTECTION.;Providing & Fixing of Double dipped GI strip type lightning conductors 25x3mm size with porcelain insulators at every 0.5mtrs. ;;
370
-
-
... More
od92139/2019_2020 : supply and Laying Copper/GI tape 32x6mm from earth electrode directly in ground as required;
155
-
-
... More
od92141/2019_2020 : Supply and installation of Test Joint for lighting down conductors at 2mtrs from Ground level;
3
-
-
... More
ELV
-
-
-
... More
od92081/2019_2020 : ACCESS CONTROL;Supply, fixing, testing and commissioning of the Access Control system with 2 Door controller TCP/IP 1 lakh event buffer 26/34 bit weigand 32 bit CPU, fingerprint + card reader weigant,4*4 ss make exit push buttton, nagnetic contact sensor, Double door EM lock 1200 LBS with Emergency glass break unit, 12 V 7AH Battery, Finger print Time & attendance machine with software TCP/IP communication stand alone 500 BPI optical snsor 3" color TFT display, user capacity 3000,Finger print exit reader, 4 core sheilded cable for access control and Access control and time attendence software to control those mensioned ;;
1
-
-
... More
od92088/2019_2020 : PUBLIC ADDRESS SYSTEM PRIVATE ;Supply, fixing, testing and commissioning of the PUBLIC ADDRESS SYSTEM PRIVATE with 6W Ceiling Speker matalic grill, size 6", 50W RMS PA Mobile Amplifier made in a compact housing compliant in size with relevant DIN standards. It features a built-in MP3 Player with remote, and has provision for external Mic and AUX inputs. Priority of mic signal over AUX / USB is provided, making it easy to make announcements without readjusting the level controls for music, UHF Wireless Microphone AWM-810UHF and 2 core 1.5sq.mm round cable for suffiicient connection;
1
-
-
... More
od92092/2019_2020 : PA SYSTEM COMMON;supply, fixing, testing and commissioning of the LAN with RJ 45 faceplate single type, RJ 45 Key stone, Cat6 UTP 24 port fully loaded patch panel, 48 port gygabyt unmanaged switch 2combo SFP port, 42U server Rack floor standing with front lockable glass door, rear openable steel door, side openable panels with locks, castors, levellers, 600W X 1000D, NRS-1 Series, includes Fan Module/4fan/tower mount/360cfm x 1no, Shelf/1000mm x 1no, Sliding Keyboard Tray/19"RTY/1000 x 1no, Horz.Cable Organiser/1U/Channel on Front x 10nos, Power Dist.Unit/Vert/12soc/5-15A/indian round pin x 1no, Mounting Hardware (pkt of 20) x 5 pkts, 1 mtr & 2mtr UTP CAT6 patch cord, sufficient UTP pair CAT 6 LAN and 48 U network Rack 600X 800 with all accessories;;
1
-
-
... More
od92097/2019_2020 : INTERCOM ;Supply, fixing, testing and commissioning of the INTERCOM with Digital EPBX with 32 lines 4 trunk, Digital EPBX with 32 lines 4 trunk, Electronic push button telephones table top, rj 11 KEYSTONE WITH FACEPLATE AND SUTABLE BACK BOX, 50pair krone box with krone disconnection module and 2 pair, 0.5 mm dia telephone cable.;
1
-
-
... More
od92099/2019_2020 : LAN;Supply, fixing, testing and commissioning of the LAN with RJ 45 faceplate single type, RJ 45 Key stone, Cat6 UTP 24 port fully loaded patch panel, 48 port gygabyt unmanaged switch 2combo SFP port, 42U server Rack floor standing with front lockable glass door, rear openable steel door, side openable panels with locks, castors, levellers, 600W X 1000D, NRS-1 Series, includes Fan Module/4fan/tower mount/360cfm x 1no, Shelf/1000mm x 1no, Sliding Keyboard Tray/19"RTY/1000 x 1no, Horz.Cable Organiser/1U/Channel on Front x 10nos, Power Dist.Unit/Vert/12soc/5-15A/indian round pin x 1no, Mounting Hardware (pkt of 20) x 5 pkts, 1 mtr & 2mtr UTP CAT6 patch cord, sufficient UTP pair CAT 6 LAN and 48 U network Rack 600X 800 with all accessories;;
1
-
-
... More
od92103/2019_2020 : WIFI;Supply, fixing, testing and commissioning of the WIFI with AC1350 Wireless Gigabit Ceiling Mount Access Point 450Mbps on 2.4GHz and 867Mbps on 5GHz totals 1317Mbps Wi-Fi speeds Compatibility with 802.3af and Passive PoE, Centralized Software Controller Monitor and manage hundreds of EAPs in a single or multiple sites Free cloud access to manage from anywhere, anytime Configure and automatically synchronize unified wireless settings to all EAPs in the network Secure Guest Network with Facebook Wi-Fi and SMS Authentication, 16 port poe switch rack mount, utp cat6 patch panel fully loaded, 1 mtr patch cord,UTP 4 Pair LAN cable, RJ 45 jack with all accessories;;
1
-
-
... More
od92106/2019_2020 : SMART CLASS ;Supply, fixing, testing and commissioning of the SMART CLASS ROOM with Short though intractive projector,Brigtness : white 3400 ANSI, Colour :3400 ANSI Lumens, Contast ratio : 16000:1 with WXGA Resolution. Inbuilt 16W speaker. Max intractivity size : 116" with in 4 feet through writing cum projection board : 90" interactivity , multi touch, surface material : 4mm thik acrylic resin coted steel sheet, gloss @ 60 degree-17 , core material 8mm thik particle bord, adhesive : rubber based adhesive backing material : 02mm thick galvinized steel aluminium powder coated frame . Installtion kit including wall mount 4 feet, 10 mtr power cable , 10 mt vga cable , 10 mtr HDMI cable. HDMI cable 10mtr 4K at conference hall and 5mtr HDMI for all monitor with all accessories;;
1
-
-
... More
FIRE FIGHTING
-
-
-
... More
od92082/2019_2020 : "Supply, installation, testing and commissioning of Monobloc type terrace pump of capacity 450LPM 35M Head with Cast Iron body and SS Impellers, pump close coupled to a squirrel cage induction motor, totally enclosed fan cooled type developing, 415 V 50 Hz, 2900 RPM suitable for foot mounted type including foundation bolts etc complete.;";
1
-
-
... More
od92089/2019_2020 : "Supply, installation, testing and commissioning of motor starter panel with suitable rating MCCB for the suitable HP booster pump, fully automatic DOL starter with over load protection, current sensing type single phase preventor, ON / OFF push buttons and indicating lamps, digital type ammeter & voltmeter, pump running / trip indications etc complete with all accessories and internal wiring with suitable copper wire etc including one set of wired remote push button station in the fire control room at ground level. Panel shall be fabricated out of 16 SWG CRCA Sheet, provisions for cable top/bottom entry, powder coated in fire red shade with weather proof enclosures and made functional.;";;
1
-
-
... More
od92093/2019_2020 : Supply of 2C X 1.5 sq mm Copper Cable from terrace level starter panel to the remote push button station at ground floor.;
1
-
-
... More
7.5.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of
following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm
1
-
-
... More
od92100/2019_2020 : Supply of 4 C x 10 Sq.MM armoured aluminium cables with ISI mark, including suitable double earthing as per KSEI standards, complete and made functional.;
1
-
-
... More
9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)
1
-
-
... More
od92108/2019_2020 : Supply,erection,laying,testing and commissioning of Galvanised Iron C class (Heavy) ERW pipes with ISI Mark complete including cutting and jointing as per the requirements of standards, welding using high quality welding electrodes for pipe size 200 MM to 65 MM dia with all factory fabricated fittings such as GI Hot dip heavy grade bends, flanges, nut & bolts etc. and supporting the pipes using MS Channels/Angles in walls/structures at required intervals as specified for fire fighting work. Piping shall have one coat of anticorrossive zincchromate industrial primer and two coats of IS approved colour code. For pipes of dia 200 mm and above IS:3589, upto 200 mm dia IS: 1239 with ISI mark.;;;100MM DIA Galvanised Iron C class (Heavy) ERW pipes with ISI Mark complete
33
-
-
... More
od92109/2019_2020 : Supply,erection,laying,testing and commissioning of Galvanised Iron C class (Heavy) ERW pipes with ISI Mark complete including cutting and jointing as per the requirements of standards, welding using high quality welding electrodes for pipe size 200 MM to 65 MM dia with all factory fabricated fittings such as GI Hot dip heavy grade bends, flanges, nut & bolts etc. and supporting the pipes using MS Channels/Angles in walls/structures at required intervals as specified for fire fighting work. Piping shall have one coat of anticorrossive zincchromate industrial primer and two coats of IS approved colour code. For pipes of dia 200 mm and above IS:3589, upto 200 mm dia IS: 1239 with ISI mark.;;;80MM Dia;
6
-
-
... More
od92111/2019_2020 : Supply, fabrication and erection of MS Structural Steel Supports for piping work with ISMC / ISA with required MS Plate of minimum 8 MM TCK in structures/ceiling including necessary anchor fasteners, applying one coat of epoxy primer and epoxy paint etc and made functional.;
38
-
-
... More
od92114/2019_2020 : Supply, Installation, Testing and Commissioning of Galvanised Iron C class (HEAVY) ERW pipes with ISI Mark (IS 1239/3589) complete with all accessories such as bend, reducers, tees etc, including excavation in foundation trenches or drains including dressing of sides and ramming of bottom, and getting out extra excavated soil and back filling of trenches with available excavated earth, consolidated layer by ramming and watering etc. Pipes shall be coated with two coats of asphaltic primer and wound with polymeric mix ( 4 MM Tck) of reputed make and supported at standard intervals and at all tee joints, bends/ offsets etc.;;;100 mm dia Galvanised Iron C class (HEAVY) ERW pipes ;
204
-
-
... More
od92115/2019_2020 : Supply, Installation, Testing and Commissioning of Galvanised Iron C class (HEAVY) ERW pipes with ISI Mark (IS 1239/3589) complete with all accessories such as bend, reducers, tees etc, including excavation in foundation trenches or drains including dressing of sides and ramming of bottom, and getting out extra excavated soil and back filling of trenches with available excavated earth, consolidated layer by ramming and watering etc. Pipes shall be coated with two coats of asphaltic primer and wound with polymeric mix ( 4 MM Tck) of reputed make and supported at standard intervals and at all tee joints, bends/ offsets etc.;80 mm dia;;
1
-
-
... More
od92116/2019_2020 : Supply, Installation, Testing and Commissioning of Galvanised Iron C class (HEAVY) ERW pipes with ISI Mark (IS 1239/3589) complete with all accessories such as bend, reducers, tees etc, including excavation in foundation trenches or drains including dressing of sides and ramming of bottom, and getting out extra excavated soil and back filling of trenches with available excavated earth, consolidated layer by ramming and watering etc. Pipes shall be coated with two coats of asphaltic primer and wound with polymeric mix ( 4 MM Tck) of reputed make and supported at standard intervals and at all tee joints, bends/ offsets etc.;150 mm dia;;
1
-
-
... More
od92119/2019_2020 : BUTTERFLY VALVE;Supply, Installation, Testing and Commissioning of PN 1.6 (16 Kg/Sq.CM) rated wafer type Butterfly Valves of the following sizes. Valves shall be provided with Black Nitrile rubber integrally moulded onto the body as body seat, Nylon coated SG Iron disc with flow control lever, stainless steel disc & stem, conforming to IS 13095 class 1 with ISI mark.;100 MM Dia;
2
-
-
... More
od92122/2019_2020 : BUTTERFLY VALVE;Supply, Installation, Testing and Commissioning of PN 1.6 (16 Kg/Sq.CM) rated wafer type Butterfly Valves of the following sizes. Valves shall be provided with Black Nitrile rubber integrally moulded onto the body as body seat, Nylon coated SG Iron disc with flow control lever, stainless steel disc & stem, conforming to IS 13095 class 1 with ISI mark.;150 MM Dia;;
1
-
-
... More
od92125/2019_2020 : NON-RETURN VALVE;Supply, Installation, Testing and Commissioning of PN 1.6 (16 Kg/Sq.CM) rated Double Flanged Non Return Valves, dual plate type with cast iron body, complete with all accessories such as nut and bolts etc, tested to 1.5 times working pressure and made functional.;100 mm dia;
2
-
-
... More
od92127/2019_2020 : NON-RETURN VALVE;Supply, Installation, Testing and Commissioning of PN 1.6 (16 Kg/Sq.CM) rated Double Flanged Non Return Valves, dual plate type with cast iron body, complete with all accessories such as nut and bolts etc, tested to 1.5 times working pressure and made functional.;150 mm dia;
1
-
-
... More
od92128/2019_2020 : HYDRANT VALVE;Supply, Installation, Testing and Commissioning of Stainless Steel SINGLE HEADED type 63 MM dia Hydrant Valve, 80 MM Dia flanges drilled conforming to IS: 5290 with ISI mark, oblique type with female instantaneous hose coupling adaptor made as per IS 903 with ISI mark, complete with cast iron wheel valve, blank cap and chain with ISI mark;External;
1
-
-
... More
od92130/2019_2020 : HYDRANT VALVE;Supply, Installation, Testing and Commissioning of Stainless Steel SINGLE HEADED type 63 MM dia Hydrant Valve, 80 MM Dia flanges drilled conforming to IS: 5290 with ISI mark, oblique type with female instantaneous hose coupling adaptor made as per IS 903 with ISI mark, complete with cast iron wheel valve, blank cap and chain with ISI mark;Internal;
4
-
-
... More
od92131/2019_2020 : BRANCH PIPE;Supply & Installation of stainless steel short Branch Pipes 63 mm, conforms to IS: 903 with ISI mark complete with 20 mm bore hexagonal based nozzle.;
4
-
-
... More
od92133/2019_2020 : FIRE HOSE;Supply Installation testing and commissioning of Fire Fighting Delivery Hoses, Reinforced Rubber Lined type, jacket made up of 100% synthetic yarn heat and abrasion resistant, having 35.7 kg/sq. cm burst pressure, 22 kg/Sq.cm proof pressure and 14 kg/sq. cm working pressure, in 15 Mtrs of length, as per IS 636 type A, 63 mm inside diameter, coupled with Stainless Steel hose coupling adaptors of instantaneous pattern, pair of male and female parts as per IS 903, 63 mm dia and made functional. Hose & couplings with ISI marked.;
4
-
-
... More
od92136/2019_2020 : SINGLE DOOR HOSE CABINET;Supply & Installation of Hose Cabinets to accommodate one piece of hose pipe along with one pair of male and female coupling and one branch pipe. The cabinet is made up 18 SWG CRCA sheet metal, with single door and glass fronted hinged doors and lock, powder coated to PO red colour. Locking arrangements of the cabinets shall be provided in the front side of the box with a glass covering to access easily.;
4
-
-
... More
od92138/2019_2020 : HOSE REEL;Supply, Installation, Testing and Commissioning of first aid hydraulic Hose Reel meeting British Standard (European standard) BS EN 671-1 and Australian Standard AS 1221EN 671-1 standards, compact type complete with swing type drum, including 25 mm dia PVC rigid braided hose in 30M length, and are designed to provide a flow rate 35 LPM for 1" at 0.2Mpa, factory fitted 25 mm bore shut off nozzle and all other necessary fixing materials fitted in vertical rising mains / walls/ structures with U Bolts or with M 12 anchor bolts. ISI marked hose reels (both drum & Hose) with 36.50 M hose and GM Chrome plated/SS nozzles can also be provided.;;
4
-
-
... More
od92140/2019_2020 : BALL VALVE;Supplying, installing, testing and commissioning of Chromium plated bronze Ball Valves with necessary fittings of screwed end type with ISI mark.;25 mm Dia;
1
-
-
... More
od92143/2019_2020 : BALL VALVE;Supplying, installing, testing and commissioning of Chromium plated bronze Ball Valves with necessary fittings of screwed end type with ISI mark.;20 mm Dia ;
1
-
-
... More
od92144/2019_2020 : FIRE BRIGADE INLET;Supply, Installation, Testing and Commissioning of Cast Iron body readymade type Fire Brigade Collective Breaching with 4 nos (twin Siamese) built in gun metal 63 mm spring loaded check valves, 150 mm/100mm flanged outlet connection and for connecting to sump and main header complete with all hardware items. One No 25 MM gate valve to be fitted on the top of the inlet valve.;
1
-
-
... More
od92146/2019_2020 : AIR RELEASE VALVE;Supply, Installation, Testing and Commissioning of Air release valves spring loaded type, tested to a working pressure of 16kg/Sq cm with Gun metal body, having screwed end 25 mm dia.;
1
-
-
... More
od92147/2019_2020 : PRESSURE GAUGE;Supply & installation of Pressure Gauge with 0-300 psi (0-21Kg/Sq.CM) range white background, black graduation scale with dual reading in Kg/Sq.CM & PSI, 1/4" BSPT bottom entry PHOSPHOROUS BRONZE bourden tube, brass moving parts, polished stainless steel case with positive seal against weather,moisture & dust, hardened glass, glycerine filled type with syphon tube and isolation cock.;100 MM Dia;
1
-
-
... More
od92148/2019_2020 : FIRE RATED DOORS;Providing and fixing of 1 Hrs Fire Rated Door with PANIC BAR, with cool-rolled steel sheet, viewing glass of 200x300x7.2 MM, fire rating time of 135 Minutes, fire proof lock and 6 piece visible hinges of 180 degree, door closer etc and fully powder coated in standard colour requirements of the Client, etc and made functional.;
4
-
-
... More
od92149/2019_2020 : DUCT DOORS;Providing and fixing of Sheet metal duct door for the fire ducts, size 1500 x 900 x 150 MM, fabricated from 16 SWG GI CR Sheet & 18 SWG shutter, sheets fully powder coated as per standard colour requirements of the Client with door handle, hinges and locking arrangements.;
4
-
-
... More
od92150/2019_2020 : METAL SHEET;Providing and fixing sheet metal steel with angle iron frame for sealing fire ducts in all floor levels to prevent spreading of smoke/fire to upper floors, using 5MM chequered Sheets in floor levels, to be fixed in fabricated angle supports of 40 MM, cutting and re-fixing the sheets as per standard requirements etc. cement plastering to seal the gap between wall and frame etc. and made functional.;
4
-
-
... More
od92151/2019_2020 : SIGN BOARD;Providing and installing in position the following type of sign boards made out of 3mm thick rigid PVC board with computer cut with texts written to recommended height in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification.;Passenger Lift sign board 12" x 4" ;
3
-
-
... More
od92152/2019_2020 : SIGN BOARD;Providing and installing in position the following type of sign boards made out of 3mm thick rigid PVC board with computer cut with texts written to recommended height in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification.;Fire Exit sign board 12" x 4" with arrow markings;
2
-
-
... More
od92153/2019_2020 : SIGN BOARD;Providing and installing in position the following type of sign boards made out of 3mm thick rigid PVC board with computer cut with texts written to recommended height in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification.;Fire Duct sign board 12" x 4" ;
4
-
-
... More
od92154/2019_2020 : SIGN BOARD;Providing and installing in position the following type of sign boards made out of 3mm thick rigid PVC board with computer cut with texts written to recommended height in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification.;Electrical Duct sign board 12" x 4" ;
6
-
-
... More
od92155/2019_2020 : SIGN BOARD;Providing and installing in position the following type of sign boards made out of 3mm thick rigid PVC board with computer cut with texts written to recommended height in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification.;Main Stair sign board 12" x 4" ;
3
-
-
... More
od92156/2019_2020 : SIGN BOARD;Providing and installing in position the following type of sign boards made out of 3mm thick rigid PVC board with computer cut with texts written to recommended height in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification.;Fire Stair sign board 12" x 4" ;
3
-
-
... More
od92158/2019_2020 : SIGN BOARD;Providing and installing in position the following type of sign boards made out of 3mm thick rigid PVC board with computer cut with texts written to recommended height in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification.;Floor display sign board 12" x 4" ;
3
-
-
... More
od92159/2019_2020 : DRY CHEMICAL POWDER;Supply and installation of Dry chemical powder type ABC Stored Pressure Fire Extinguishers complete with initial charges of Mono Ammonium Phosphate 50% based silicon coated powder, pressure indicating gauge, discharge hose, wall mounting brackets etc. and with ISI mark.;6 Kg Capacity;
4
-
-
... More
od92161/2019_2020 : CO2 FIRE EXTINGUISHER;Supply and installation of CO2 type Fire Extinguishers of following capacity Conforming to IS: 13849 with initial gas, filled in steel cylinders, safety valve with lock, discharge hose and horn etc and with ISI mark.;2 Kg Capacity;
1
-
-
... More
od92163/2019_2020 : CO2 FIRE EXTINGUISHER;Supply and installation of CO2 type Fire Extinguishers of following capacity Conforming to IS: 13849 with initial gas, filled in steel cylinders, safety valve with lock, discharge hose and horn etc and with ISI mark.;3 Kg Capacity;
1
-
-
... More
od92164/2019_2020 : CO2 FIRE EXTINGUISHER;Supply and installation of CO2 type Fire Extinguishers of following capacity Conforming to IS: 13849 with initial gas, filled in steel cylinders, safety valve with lock, discharge hose and horn etc and with ISI mark.;4.5 Kg Capacity;
3
-
-
... More
od92165/2019_2020 : ABC DRY POWDER FIRE EXTINGUISHER ;providing and fixing Fire Abc Dry Powder Modular Fire Extinguisher;5 Kg Capacity;
6
-
-
... More
od92166/2019_2020 : STATUTORY APPROVAL;Complete services from the contractor for liasoning works such as filing necessary applications, submission of forms for approval to local fire authorities, depositing the fees / other amounts as required for getting the premises / installations, inspected and approved and all other formalities required till approved by Local Fire Authorities. All the expenses incurred in this regard shall be borne by the Contractor. The official payments to be made for any security deposit etc. in this regard which shall be reimbursed on production of original voucher. ;
1
-
-
... More
DIESEL GENERATOR
-
-
-
... More
od92090/2019_2020 : Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
15
-
-
... More
od92096/2019_2020 : Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
60
-
-
... More
od92101/2019_2020 : Earthing with CI earth plate 1200 mm x 1200 mm x 6 mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal or coke and salt complete as required.
2
-
-
... More
od92104/2019_2020 : Supply , Laying of 3.5x185sq.mm size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor power cable conforming to IS 7098 (Part 1) amended upto date.
120
-
-
... More
od92107/2019_2020 : Supply & installation of exhaust gas piping of suitable diameter as per manufactures standard welded black MS, B class pipe confirming to IS:3589 cut to required lengths and installed with necessary bends, supports and clamps, anti- vibration mountings, insulation of exhaust system with mineral wool / Rockwool, 50mm thick wire mesh & aluminum cladding etc
32
-
-
... More
od92113/2019_2020 : Supply & Fabrication with steel sections and erection of MS base frames , MS angle channels , flat etc for supporting exhaust piping, etc. Including welding, bolting, chipping , grouting etc, including applying one antirust coat of approved primer and two finished coats of approved paint , breaking and finishing of walls, floors etc. The scope is inclusive of minor civil work as required, supply & installation of GI hardware materials, consumables, anchor fasteners, tools & tackles and necessary labour with supervision but not limited to, and complete as per approved drawings,
1200
-
-
... More
od92117/2019_2020 : Trial run of DG set for 6 hrs. on no-load and variable load condition and to record the parameters as per prescribed format. Cost of consumable ( fuel oil, lube oil, etc.) to be borne by Contractor.
1
-
-
... More
od92118/2019_2020 : The DG set control panel shall be provided with all engine protection equipments, indications etc The DG set shall be suitable for AMF operation including all necessary control cabling From DG set to AMF panel. The DG set control panel shall have 250A, 25kA TPN thermal magnetic type MCCB with OL, SC and EF protection, RYB, on/off indication lamp, voltmeter, ammeter, energymeter, frequency meter etc The Low set earth fault relay shall be provided in control panel with CT of 50/5A 10VA Cl. 5P10 at DG neutral.
1
-
-
... More
od92123/2019_2020 : Supply, Installation,Testing and commissioning of 160KVA, silent type, water cooled, radiator type, four stroke, electric start D.G Set with acoustic enclosure and standard control panel. The engine shall be capable of taking 10% overload for one hour after 12 hours of continuous operation. The DG shall be suitable for AMF operation. The alternator shall be brushless, self excited, self regulated, SPDP enclosure, class F/H insulation, suitable for continuous operation at 1500 rpm, generating 415 V +/- 5% at 0.8 p.f, 50Hz, 0.85 load factor, 3 phase, 4 wire system generally conforming to BS: 2613 & IS: 4722.
1
-
-
... More
LIFT
-
-
-
... More
od92094/2019_2020 : Design, manufacture, supply, installation, testing and commissioning of Gearless, machine room less Passenger lifts of capacity 13 passengers for (G+2) storeyed Building with the following specifications: Location of Lifts : Inside the building i) Speed : 1.0 MPS ii) Floors : 3 floors (GF+FF+SF) iii)Travel : 12.00 Mtrs (approx.) iv) Stops & opening 3 stops & 3 openings v) Controller: Microprocessor based variable Frequency Regenerative closed loop. vi) Automatic rescue device complete with dry maintenance free batteries as required. vii)Operation: Microprocessor based single automatic push button/ simplex selective collective/duplex collective selective with/ without attendant viii)Power – 415 V, 3 phase, 50 Hz, 4 wires system ix) Type of doors a) Car : Power operated centre opening horizontal sliding stainless steel scratch proof (Honey Combing finish) b) Landing doors: Stainless Steel with Honey Combing Finish. c) Flooring: PVC Flooring. VVVF drive control for constant load of 884 Kg respectively traveling @ 1.5 mps with Simplex operation with out attendant, car position indicators, battery operated alarm bell and emergency light, power operated centre opening automatic sliding stainless steel doors for car entrance and hoistway entrance etc. including all steel, civil and electrical materials as specified such as machine beams, buffer support channels, facia plates, landing sills, pit ladder metal screen in elevator pit etc., as per the specification including cost of all civil and electrical works required for installation of elevator in the existing lift well and machine room, scaffolding, cutting holes, grouting and making good to damages in wall, floor, ceiling etc. for fixing accessories, foundation bolts etc., hoistway wiring and other associated Wirings including Fireman’s switch complete in all respect as per direction of Engineer-in-charge
1
-
-
... More
od92098/2019_2020 : Supply of all required spares and Annual Comprehensive Maintenance Contract (Annual Maintenance Contract (AMC) for 5(five) years after expiry of the guarantee period) beyond the expiry of the guarantee period including cost, conveyance, loading, unloading, royalties, taxes all materials and cost all labours, sundries, T&P required as per the direction of the Engineer -in -charge.
-
-
-
... More
1st Year
12
-
-
... More
2nd year
12
-
-
... More
3rd year
12
-
-
... More
4th year
12
-
-
... More
5th year
12
-
-
... More
SOLAR PANEL
-
-
-
... More
od92084/2019_2020 : Supply and installation of Grid Tie Solar Power System 5kw 440v with Wifi Monitoring System and Poly Crystaline Solar Panel 4950w 330w DC 42v 15nos
1
-
-
... More
od92086/2019_2020 : Supply of 10KW 440v Three Phase Extra items if Required as per Site Conditions
1
-
-
... More
90.12.6.39 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.
25
-
-
... More
9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)
2
-
-
... More
2.1.3 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.100 Amp TP&N
2
-
-
... More
2.1.2 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & N
4
-
-
... More
5.4 : Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
4
-
-
... More
1.17.20 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 4 sq. mm
40
-
-
... More
od92112/2019_2020 : Supply and installation of Lightining Arrestor for Solar Power System
1
-
-
... More
LPG
-
-
-
... More
od92085/2019_2020 : 1. Design, supply, fabrication, installation, testing and commissioning of LPG line with GAS BANK (6 +6 CYLINDER MANIFOLD SYSTEM), 40 Mtr Length MS gas bank. 6+6 (One set working another set standby) LPG cylinder bank of 14.2 kg each LPG cylinder with: 'C' class seamless steel pipe conforming to IS:1239 : 2” for gas bank pipe laying and 1” for rest pipe laying, with twin stage Pressure regulator: Upto 30 PSI (dial type) and supported with wall by providing adequate supports spacing not more than 1.5 Mtr., fitted with flanges & accessories and isolation valves having ball valves of approved makes with LPG installation certificate having carbon steel body, SS ball and PTFE seat and all other fittings such as tees, reducers, unions, elbows etc. The piping shall be joined through welding by using welding electrode of ISI marked only. Care must be taken to prevent rusting of piping installation by providing red oxide primer coating and suitable sleeve of GI/wood shall be provided wherever the pipes are crossing through the walls/slabs etc. On completion, the LPG manifold complete with all accessories and individual components which are subjected to cylinder pressure shall be capable of withstanding a test pressure twice the working pressure. All the accessories, components used for installation of LPG pipeline system shall have the approval from Consultant. Isolation/shut off valves shall be ball valves with installation certificate for use in LPG pipelines and shall have carbon steel body, stainless steel ball and PTFE seat. The work includes supply, installation, testing and commissioning of LPG manifold and supply system with at least two coat paints as per LPG color norms. The items covered under scope of works shall include all those ancillary items which may be required to complete the work in all respect whether specifically mentioned or not. Fire fighting arrangements for LPG bank should be as per the guidelines of statutory body/local authority/local government. Preferred make - MS pipe of JINDAL / TATA complete in all respect as per direction of Engineer-in-charge.;;
1
-
-
... More
SEWAGE TREATMENT PLANT- ELECTRICAL WORKS
-
-
-
... More
od92080/2019_2020 : Supply and installation of Pipes & Cabling (Within 5 m from Plant Room) ;Pipe & Valves required fittings for the installation of various equipment;Air Line ;Pressurized Water Line;Gravity Water Line;Electrical Cable for installation of pumps, motors, level controls etc;Power Cable AL Flexible - 3 Core;Control Cable al - 2 Core;
1
-
-
... More
od92091/2019_2020 : Supply and installation of PLC Based Central Control Unit for the automation of SBR including, Level controls, Turbidity meter, electrical switch gear and accessories, inside - white, CRCA - 16 gauge sheet - Wall mount or 14 gauge - Wall / Floor mount manufactured as per state Electrical inspectorate standards.;Bus bar;Switch gear;PLC;Contactor & Overload relay;MCB - for each contactor;Control Components;On/Off Valves;Ultrasonic Level Transmitter;TOC type energy meter in panel board;
1
-
-
... More
od92095/2019_2020 : supply and installation of TOC type energy meter in panel board;
1
-
-
... More
CCTV
-
-
-
... More
od92261/2019_2020 : Network TDN IR Indoor Ball Camera 1/3 inch CMOS,2.0 MP, 2.8 mm Fixed, 12 IR LEDs, PoE, H.264,Configurable motion detection and camera tamper detection settings, including configurable alarm notifications,Built-in PoE (Power over Ethernet) eliminates separate power supply and associated wiring.
5
-
-
... More
od92264/2019_2020 : Network TDN IR Outdoor Bullet Camera 1/3 inch CMOS, 2.0 MP, 3.6 mm ,Fixed, 24 IR LEDs PoE, H.264, ,Configurable motion detection and camera tamper detection settings Excellent low-light performance with 3D Noise Reduction, saving storage and bandwidth together with H.264 High Profile codec
5
-
-
... More
od92265/2019_2020 : Commissioning of accessories required for above equipments
1
-
-
... More
od92267/2019_2020 : 8 Port Layer 2 POE switch with 12 Port LIU
1
-
-
... More
od92270/2019_2020 : Supplying installation testing & commissioning of ands and 6 mtrs GI pole of 75mm dia up to 2 mt height & 4 mt 50 mm dia above of pole total 6M height with bracket & with 300x300x6 mm M.S. base plate as per drawing and specification including one coat of rad oxide and two coats of approved colour painting
1
-
-
... More
od92271/2019_2020 : ;Supply, Installation, Testing & Commissioning of 32 channel NVR , with multiple hard drive options plus the ability to expand to up to 16 TB of internal storage. Multiplex Operation, H.264, High profile, BNC/VGA/HDMI output, main profile, baseline. Recording storage shall be calculated based on 25 FPS, 720P,15 days, 30days
1
-
-
... More
od92274/2019_2020 : Supply, installation & testing of MS 25mm Conduits.
1510
-
-
... More
od92275/2019_2020 : Supply and laying of 2C X 1.5 sq mm , Power Cable armoured
505
-
-
... More
od92278/2019_2020 : Supply, installation & testing of CAT-6 cable with all termination, crimping & required accessories
3810.226
-
-
... More
od92279/2019_2020 : Supply and installation of 32" monitor, format type-LED,HD-TVI,HDCVI,AHD caompactible alanogue CCTV (CVBS) compactible max resolution 1080p.1. Analogue BNC VIDEO input ,HD BNC LOOP output ,HDMI input VGA input,3.5mm Audio input builtin audio speakers , VESA 75 mount compactible
1
-
-
... More
FIRE ALARM SYSTEM
-
-
-
... More
od92262/2019_2020 : Supply,Installation,Testing & Commissioning of Supply,Installation,Testing & Commissioning of Dual Action Addressable Manual Pullstation with Address Switch to programme the modules which monitors and reports contact status..Complete as required as per technical specification. the modules which monitors and reports contact status..Complete as required as per technical specification.
6
-
-
... More
od92263/2019_2020 : Supply,Installation,Testing & Commissioning of Hooter / Strobe rated at 82 dBA for Audible annunciation and 75cd flashintg at 1 Hz for visual indication.Complete as required as per technical specification.
4
-
-
... More
od92266/2019_2020 : Supply,Installation,Testing & Commissioning of Analogue Addressable Monitor Module for monitoring the field devices & shall be with the facility of hard addressing, capable of providing dry contact rated at 24v DC, 2A.Complete as required as per technical specification.
4
-
-
... More
od92268/2019_2020 : Supply,Installation,Testing & Commissioning of Analogue Addressable Control Relay Module shall be with the facility of hard addressing, capable of providing dry contact rated at 24v DC, 2A for integration with ACS, Fans or third party system etc. ,complete as required as per technical specification. - For access control Main Panel
4
-
-
... More
od92269/2019_2020 : Supply,Installation,Testing & Commissioning of Fault Isolator Module, which should not occupy any address in the loop, should be capable of monitoring shorted loop circuit and automatically restore communications when shorted conditions are corrected.Complete as required as per technical specification.
5
-
-
... More
od92272/2019_2020 : Supply,Installation,Testing & Commissioning of Response Indicators for all detectors located above false ceiling.Complete as required as per technical specification.
50
-
-
... More
od92273/2019_2020 : Supply, Installation, Testing & Commissioning of Analogue Addressable Smoke Detector with the hard addressing feature, with standard base and junction box wherever required. Detector shall be with Visible bi-color LEDs for 360⁰ viewing.Complete as required as per technical specification.(Smoke detector above & below false ceiling )
5
-
-
... More
od92276/2019_2020 : Supply, Installation, Testing & Commissioning of Analogue Addressable Heat Detector with the hard addressing feature, with standard base and junction box wherever required. Detector shall be with Visible bi-color LEDs for 360⁰ viewing.Complete as required as per technical specification.
2
-
-
... More
od92277/2019_2020 : Supply, Installation, Testing & Commissioning of Analogue Addressable Multi Sensor Detector with the hard addressing feature, with standard base and junction box wherever required. Detector shall be with Visible bi-color LEDs for 360⁰ viewing.Complete as required as per technical specification.
6
-
-
... More
od92280/2019_2020 : Providing and fixing in position the following M.S. conduits including all accessories concealed in F. ceiling/wall/floor as required including 1.6 mm thick M.S. junction or pull boxes with 3mm thick perspex sheet cover plate complte with 1.6 mm dia. G.I. pull wires in the length of conduit.
1
-
-
... More
od92281/2019_2020 : Supply, installing, testing and commissioning of 2c x 1.5 sq. mm, pvc insulated FRLS Armoured copper cable for SLC Loop & Power Supply, confirming to IS standards and specifications..Complete as required as per technical specification. - Cable should be 2 hours fire rated
1495
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements