Kerala State IT Infrastructure Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 2,00,000Document Cost
₹ 11,900Tender Fee
Refer Documents
Summary
Interior Fitout Works In 5th,8th And 9th Floors Of Jyothirmaya Building In Infopark Kochi Phase-i Campus
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_KSITI_395342_1Bid Award Id
ViewTender No
KSITIL/IP/2020-21/03Tender Authority
Kerala State IT Infrastructure Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
od269579/2019_2020 : Demolishing brick/block work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material by mechanical means, , for all leads and lifts, including loading, transporting, unloading to approved dumping ground or as approved by Engineer-in-charge and as per direction of Engineer-in-Charge.
14.44
-
-
od269580/2019_2020 : Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of unserviceable material by mechanical means, , for all leads and lifts, including loading, transporting, unloading to approved dumping ground or as approved by Engineer-in-charge and as per direction of Engineer-in-Charge.
4.21
-
-
od269581/2019_2020 : Dismantling tile work in floors, walls and roofs laid in cement mortar, for all leads and lifts, including disposal of unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved dumping ground or as approved by Engineer-in-charge and as per directions of Engineer-in-charge
219.61
-
-
od269582/2019_2020 : Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material by mechanical means, , for all leads and lifts, including loading, transporting, unloading to approved dumping ground or as approved by Engineer-in-charge and as per direction of Engineer-in-Charge.
200
-
-
15.12.1 : Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below
5
-
-
15.12.2 : Of area beyond 3 sq. metres
5
-
-
CIVIL WORKS
-
-
-
6.47 : Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor Vlevel with RCC band at sill level and lintel level with approved block laying polymermodified adhesive mortar all complete as per direction of Engineer-in-Charge. (Thepayment of RCC band and reinforcement shall be made for seperately).
74.03
-
-
50.6.1.3 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure above floor two level up to floor V level thickness 20cm and above in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
1.63
-
-
50.6.1.6 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level upto floor five level thickness 20cm and above in : CM 1:6 ( 1 cement : 6 coarse sand sand) etc complete
1.63
-
-
6.4.1 : Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in:Cement mortar 1:4 ( 1 cement : 4 coarse sand)
7.95
-
-
6.5 : Extra for brick work/ AAC block masonry/Tile brick masonry in super structure above floor V level, for each four floors or part thereof by mechanical means.
80.88
-
-
6.13.2 : Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement : 4 coarse sand)
76.32
-
-
6.14 : Extra for half brick masonry in superstructure, above floor V level for every four floors or part thereof by mechanical means.
51.84
-
-
od272355/2019_2020 : Reinforced cement concrete work with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size) in beams, suspended floors, roofs, having slope up to 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases including cost of curing, excluding the cost of centering, shuttering, finishing and reinforcement, etc complete as per directions of Engineer-in-charge
9.59
-
-
5.9.4 : Centering and shuttering including strutting, etc. and removal of form for:Shelves (Cast in situ)
46.71
-
-
5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
120.83
-
-
5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
865.64
-
-
22.5 : Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
806.28
-
-
od315456/2019_2020 : Providing and laying, in sunken slab portion in toilets, light weight concrete consisting of 1 part Portland cement to 6 part vermiculite concrete aggregate including well compacted vibrating, curing etc., The rate shall include all leads and lifts, materials, labour, equipment and machinery, loading and unloading, transportation and all other incidental charges etc all as complete and directed by Engineer in charge.
118.13
-
-
4.2.3 : Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
13.73
-
-
4.14 : Extra for concrete work in superstructure above V level for each four floors or part thereof.
13.73
-
-
10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
256.26
-
-
11.4 : 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete
469.96
-
-
11.5 : 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufactures specification. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
2263.73
-
-
11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
1285.65
-
-
11.46.4 : Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 1000x1000 mm
59.26
-
-
11.41.3 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 800x 800 mm
10
-
-
11.42 : Deduct for not using 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) bedding in laying of floor tiles.
10
-
-
11.43 : Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive ( Water based) conforming to IS : 15477, in average 3 mm thickness.
50
-
-
11.46.2 : Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
50
-
-
11.46.3 : Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 800 x 800 mm
973
-
-
11.48.4 : Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 1000x1000 mm
1383.25
-
-
11.41.4 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 1000x1000 mm
1717.09
-
-
11.48.2 : Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm
10
-
-
11.48.3 : Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 800x800mm
10
-
-
11.50 : Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles
1383
-
-
od273653/2019_2020 : Providing and laying vitrified floor tiles of size 600 x 600 mm with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with epoxy grout and matching pigments etc., complete as per directions of Engineer-in-charge
251.93
-
-
od273699/2019_2020 : Providing and fixing I st quality ceramic glazed wall tiles of size 300 x 600 mm conforming to IS : 15622 , of approved make, in all colours, as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete as per directions of Engineer-in-charge.
1056.72
-
-
od316487/2019_2020 : Providing and fixing in position anodised aluminium corner bead profiles, to match the height of tiles, including internal and external corners, end caps and joints. The laying to be done as per manufacturer's specification and as per directions of Engineer-in-charge
320.6
-
-
16.89 : Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi models location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
49.01
-
-
11.54.1 : Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of:
a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on the G.I. Base plate of size 100mmx100mmx3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5mm welded with GI fully threaded stud 16 mm outer diameter with two GI check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug.
b) Stringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80 mm thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in-charge.
c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel Guages: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with light weight foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology upto 1mm thickness for superior adhesion and Surface flatness within 0.75mm. The panel is to withstand a Concentrated Load of 363 Kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50 kg all complete as per the approved manufacturers specification and as per the direction of Engineer-in-charge. All specification must be printed on the side of the panel to ensure the quality of the product.300 mm Finished Floor Height (FFH).
12.42
-
-
od318544/2019_2020 : Providing and laying modular carpet of approved make made with 100% nylon 6.6 Multilevel textured loop pile, manufactured using digital injection / solution dyeing process, with protective treatment stainsmart (stain repel/stain resist/stain release), anti microbial alphasan, with PVC free PU cushion backing or recyclable/ recycled backing as per manufacturer's specification, nominal total thickness of minimum 6.8 mm (pile height minimum 2.75 mm) , Minimum Density of 95 Oz/ Sq.yd. Carpet to meet ARR - Severe Rating as per CRI TM 101 . Material shall be CRI LEED ceertified , including fixing with green adhesive of approved make, all complete as per manufacturer's specifications and direction of Engineer in Charge. Size of the carpet shall be in accordance with approved sample.
42.7
-
-
od317435/2019_2020 : Providing and fixing machine cut, mirror/ eggshell polished, Granite stone work for wall lining, in required design and pattern wherever required, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-charge.<br><br>
42.31
-
-
8.2.2.1 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shadeArea of slab upto 0.50 sqm
18.83
-
-
8.2.2.2 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm
46.72
-
-
8.3.2 : Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work
66.73
-
-
8.5 : Extra for providing opening or required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
49
-
-
8.10.2 : Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in Charge and finished smooth.Granite Stone of approved shade
5.63
-
-
od316221/2019_2020 : Providing and fixing in position Stainless steel Grade 304 expansion joint profiles, to match the height of floor tiles, composed of two counter posed profiles in L shaped, joined with a vulcanised EDPM, polished and of approved colour, the profile have perforated wings for perfect bond to substrate and for correct movement of the joint. The EDPM to have high resistance to mechanical & chemical stress, UV rays, fungi and bacteria. The laying to be done as per manufacturer's specification as per design for expansion joints. and as per directions of Engineer-in-charge
74
-
-
5.44.1 : Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded
aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to
floor /floor to wall expansion control system for various vertical localtion in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness
required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering
arrangement that freely rotates / moves in all directions. The Self – centering arrangement shall exhibit circular sphere ends that lock and slide inside the
corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier
Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in-Charge . (Material shall confirm to ASTM 6063).Floor Joint of 100 mm gap.
74
-
-
5.45.1 : Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221-02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office
Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063).Wall Joint of 100 mm gap.
48
-
-
5.46.1 : Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates asper ASTM B221-02. The system shall be such that it provides watertight roof to roof/roof to corner joint cover
expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to
accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s preengineered self-centering arrangement that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of
movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure
to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. Material shall confirm to ASTM 6063.Roof Joint of 100 mm gap.
74
-
-
od272093/2019_2020 : Plastering with cement mortar 1 : 4 ( 1 cement : 4 fine sand), 12 mm thick finished with a floating coat of neat cement including cost for scaffolding or form work as necessary, curing, providing plaster mesh at the junctions of masonry and concrete works as required etc. complete as per directions of Engineer-in-charge
206.51
-
-
od314787/2019_2020 : Providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.
5
-
-
13.78 : Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite / perite respectively conforming to IS : 2547 ( Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete.
708.79
-
-
13.26 : Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
3758.34
-
-
od272277/2019_2020 : Wall painting two or more coats with premium acrylic emulsion paint having VOC content less than 50 grams / litre of approved brand and manufacture including applying additional coats wherever required to achieve even shade and colour after applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content and including cost of scaffolding or form work as necessary etc. complete as per directions of Engineer-in-charge
3049.54
-
-
13.47.1 : Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
180.73
-
-
13.44.1 : Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)
180
-
-
13.84.2 : Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats
5
-
-
13.85.2 : Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With ready mixed red oxide zinc chromatic on steel / iron works having VOC content less than 250 grams/ litre
5
-
-
od318552/2019_2020 : Decorative wall painting by commissioning an artist to paint a mural art/graffiti work on internal walls including cost of all materials, labour, scaffolding, accessories etc complete as per directions of Engineer-in-charge
78.85
-
-
INTERIOR WORKS
-
-
-
od274909/2019_2020 : Providing and fixing partition upto true ceiling level having 100 mm overall thickness with 12.5 mm thick double skin fire rated board conforming to IS : 2095 : part I, including frame work made of special sections power pressed/ roll form G.I. sheet with Zinc coating of 120/150 gsm , consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of 2 nos each of 12.5 mm thick double skin fire rated board to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre, with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher, applying plaster of paris putty to prepare even and smooth, finishing with two coats of primer suitable for board, painting two or more coats with premium acrylic emulsion paint having VOC content less than 50 grams/litre of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour, insulation to be provided with Resin Bonded rock wool conforming to IS: 8183, having density 48 Kg/m3, 50mm thick, wrapped in 200 G Virgin Polythene Bags fixed to boards with screw, rawl plug & washers and held and in position by criss crossing GI wire etc complete as per direction of Engineer-in-charge. Rate to include cost for providing openings as per requirement. Note: Area from finished floor level (FFL) to bottom of false ceiling height only will be measured for payment.
186.94
-
-
od275224/2019_2020 : Providing and fixing partition upto true ceiling height having 100 mm overall thickness with 13 mm thick Gyproc Duraline board conforming to EN 520:2004 and 12.5 mm thick plain gypsum board conforming to IS : 2095 : part I, including frame work made of special sections power pressed/ roll form G.I. sheet with Zinc coating of 120/150 gsm , consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of 1 no. of Duraline board + 1 no of 12.5 mm thick double skin plain gypsum board to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre, with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher, applying plaster of paris putty to prepare even and smooth, finishing with two coats of primer suitable for board, painting two or more coats with premium acrylic emulsion paint having VOC content less than 50 grams/litre of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour, insulation to be provided with Resin Bonded rock wool conforming to IS: 8183, having density 48 Kg/m3, 50mm thick, wrapped in 200 G Virgin Polythene Bags fixed to boards with screw, rawl plug & washers and held and in position by criss crossing GI wire etc complete as per direction of Engineer-in-charge. Rate to include cost for providing openings as per requirement. Note: Area from FFL to bottom of false ceiling height only will be measured for payment.
233.78
-
-
od275406/2019_2020 : Providing and fixing partition upto true ceiling height having 100 mm overall thickness using 13 mm thick Gyproc Duraline board, 12.5 mm thick Habito board conforming to EN 520:2004 and 12.5 mm thick plain gypsum board conforming to IS : 2095 : part I, including frame work made of special sections power pressed/ roll form G.I. sheet with Zinc coating of 120/150 gsm , consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of 1 no. of Duraline board + 1 no of 12.5 mm thick double skin plain gypsum board one one side of frame and 1 no. of Habito board + 1 no of 12.5 mm thick double skin plain gypsum board to other side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre, with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher, applying plaster of paris putty to prepare even and smooth, finishing with two coats of primer suitable for board, painting two or more coats with premium acrylic emulsion paint having VOC content less than 50 grams/litre of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour, insulation to be provided with Resin Bonded rock wool conforming to IS: 8183, having density 48 Kg/m3, 50mm thick, wrapped in 200 G Virgin Polythene Bags fixed to boards with screw, rawl plug & washers and held and in position by criss crossing GI wire etc complete as per direction of Engineer-in-charge. Rate to include cost for providing openings as per requirement. Note: Area from FFL to bottom of false ceiling height only will be measured for payment.
32.02
-
-
od291539/2019_2020 : Providing and fixing partition upto true ceiling level having 75 mm overall thickness using 13 mm thick Gyproc Duraline board and 12.5 mm thick Habito board conforming to EN 520:2004 , including frame work made of special sections power pressed/ roll form G.I. sheet with Zinc coating of 120/150 gsm , consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of 1 no. of Duraline board on one side and 1 no. of Habito board to other side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre, with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher, applying plaster of paris putty to prepare even and smooth, finishing with two coats of primer suitable for board, painting two or more coats with premium acrylic emulsion paint having VOC content less than 50 grams/litre of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour, insulation to be provided with Resin Bonded rock wool conforming to IS: 8183, having density 48 Kg/m3, 50mm thick, wrapped in 200 G Virgin Polythene Bags fixed to boards with screw, rawl plug & washers and held and in position by criss crossing GI wire etc complete as per direction of Engineer-in-charge. Rate to include cost for providing openings as per requirement. Note: Area from FFL to bottom of false ceiling height only will be measured for payment.
95.99
-
-
od291540/2019_2020 : Providing and fixing partition upto true ceiling level having 75 mm overall thickness with 13 mm thick Gyproc Duraline board conforming to EN 520:2004, including frame work made of special sections power pressed/ roll form G.I. sheet with Zinc coating of 120/150 gsm , consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of 1 no. of Duraline board to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre, with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher, applying plaster of paris putty to prepare even and smooth, finishing with two coats of primer suitable for board, painting two or more coats with premium acrylic emulsion paint having VOC content less than 50 grams/litre of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour, insulation to be provided with Resin Bonded rock wool conforming to IS: 8183, having density 48 Kg/m3, 50mm thick, wrapped in 200 G Virgin Polythene Bags fixed to boards with screw, rawl plug & washers and held and in position by criss crossing GI wire etc complete as per direction of Engineer-in-charge. Rate to include cost for providing openings as per requirement. Note: Area from FFL to bottom of false ceiling height only will be measured for payment
152.33
-
-
od275914/2019_2020 : Providing and fixing partition upto true ceiling level made out of aluminium box frame using extruded sections of size 50 x 25 mm - 1.5mm thick at 600mm c/c in both direction covered with paneling on both sides with 12 mm thick fire retardant plywood conforming to IS: 5509 including a coat of approved primer on one face as per directions of Engineer-in-charge. Rate shall include cost for necessary hardwares and shall include for forming a paneling to any shape including circular profile etc. complete. Note: The Aluminium framework shall be anchored / fixed properly in true RCC ceiling and additional diagonal supports to be provided to get sufficient rigidness. If any doors, glass panels, openings are provided in this partition, the area of the same shall be deducted. Rate to include cost for providing openings as per requirement. Area from FFL to bottom of false ceiling height only will be measured for payment.
9.6
-
-
od275915/2019_2020 : Providing and fixing partition upto true ceiling level made out of aluminium box frame using extruded sections of size 50 x 25 mm - 1.5mm thick at 600mm c/c in both direction covered with paneling one side with 12 mm thick fire retardant plywood conforming to IS: 5509 and other side with 12.5 mm thick tapered edge gypsum fire resistant board and including cost of jointing and finishing to a flush finish with recommended jointing compound, jointing tape, joint finisher, two coats of primer suitable for gypsum board and a coat of approved primer on one face of plywood as per manufacturer's specification as per directions of Engineer-in-charge. Rate shall include cost for necessary hardwares and shall include for forming a paneling to any shape including circular profile etc. complete. Note: The Aluminium framework shall be anchored / fixed properly in true RCC ceiling and additional diagonal supports to be provided to get sufficient rigidness. If any doors, glass panels, openings are provided in this partition, the area of the same shall be deducted. Rate to include cost for providing openings as per requirement. Note: Area from FFL to bottom of false ceiling height only will be measured for payment.
125.06
-
-
od298818/2019_2020 : Providing and fixing paneling (wall, column etc), in general it shall be made of Aluminium extruded sections of size 50x25mmx1.5mm thick in both horizontal and vertical direction at 600 mm c/c spacing. The framework shall be covered with single layer 12 mm thick fire retardant plywood on sides up to 75mm above false ceiling including a coat of approved primer on one face and 1 mm thick decorative high pressure laminated sheet of plain / wood grain in gloss/ matt/suede finish as selected by Engineer-in-charge fixed with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Types S, including cost of adhesive of approved quality. The cost of necessary hardware's etc; as required for complete the works. Actual seen surface area.(i.e) from FFL to bottom of false ceiling height will be measured and paid.
362.25
-
-
9.127.2 : Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss/ matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Types S, including cost of adhesive of approved quality.1.0 mm thick
144.26
-
-
od276054/2019_2020 : Providing and fixing partition above false ceiling, at locations of glass partitions, made out of aluminium box frame using extruded sections of size 50 x 25 mm - 1.5mm thick at 600mm c/c in both direction covered with paneling on both sides with 12.5 mm thick tapered edge gypsum fire resistant board including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification as per directions of Engineer-in-charge. Rate shall include cost for necessary hardwares. Note: The Aluminium framework shall be anchored / fixed properly in true RCC ceiling and additional diagonal supports to be provided to get sufficient rigidness. Actual seen surface area.(i.e) from false ceiling to true RCC ceiling height only will be measured for paid.
271.64
-
-
od277413/2019_2020 : Providing and fixing Single glazed partitions with 12mm thick toughened glass as per drawings using full height Dorma partition systems or approved equivalent and shall be able to provide a sound reduction of 36dB. The glass panels shall be supported by Aluminium WCP Profiles of 25x45mm on all 4 sides of the Glass partition perimeter. Glass-to-glass butt joints shall be done using Aluminium ' H ' profile for 12 mm glass, and corner glass junctions to have 90° corner Aluminium profile. At Glass perpendicular 'T' junctions, Aluminium T-junction profile to be used. Finishes of all aluminium frame components shall be Natural Anodized Finished (20 microns). At the location of doors, wideline section (100x25mm) shall be provided around the door two vertical upto false ceiling and horizontal at door top. Adjacent to the door frame, necessary service profile to be provided for installing the access control system as per requirement. <br>Rate shall include for providing and fixing necessary support arrangement to ensure proper anchorage / fixing from the ceiling to get sufficient rigidity (to the required level).<br>Rate shall include for transport charges, handling, loading and unloading, installation of glass and protecting the module and glass till handing over, testing, commissioning all necessary hardware, Structural supports, etc. complete and all as per manufacturers specifications as directed. the vendor has to prepare the shop drawing for client / Architects approval. Rate shall include for providing transport charges, handling, loading and unloading, installation, protecting the module and glass till handing over, testing, commissioning all necessary hardware's, scaffolding, wastage, etc complete as per directions of Engineer-in-charge<br>Note : Only the clear elevation area below the false ceiling level shall be considered for measurement. <br>
543.28
-
-
od311865/2019_2020 : Providing and fixing partition consisting of G.I. frame and with 12.5 mm thick double skin fire rated board conforming to IS : 2095 : part I above ceiling for compartmentalisation around air conditioning units, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with Zinc coating of 120 gms/ (both side inclusive), consisting of channels 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall/true ceiling with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to one side of frame work by 25 mm long dry wall screws on studs and channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of Engineer-in-charge all complete.
90
-
-
od317460/2019_2020 : Providing and fixing 100mm height Aluminium Modular skirting of approved make at Masonry walls & Partitions, and of approved shape & profile . The systems shall be of complete aluminium type including capping strips. It shall be made of extruded aluminium of 1.3mm avg. & anodized to 20 microns Rate to include supply & installation of matching colour corner guards. Rate to include all hardware, etc complete.
912
-
-
od278451/2019_2020 : Providing and fixing false ceiling using 12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1 at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120-150 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint, applying plaster of paris putty to prepare even and smooth, two coats of primer suitable for board, painting two or more coats with premium acrylic emulsion paint having VOC content less than 50 grams/litre of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge Note: The plan area only will be measured for payment
1488.65
-
-
od278497/2019_2020 : Providing and fixing false ceiling using 12.5 mm thick tapered edge gypsum fire resistant board conforming to IS : 2095-Part 1 at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120-150 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint, applying plaster of paris putty to prepare even and smooth, two coats of primer suitable for board, painting two or more coats with premium acrylic emulsion paint having VOC content less than 50 grams/litre of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge Note: The plan area only will be measured for payment
43.05
-
-
od278498/2019_2020 : Providing and fixing false ceiling using 12.5 mm thick tapered edge gypsum moisture resistant board conforming to IS : 2095-Part 1 at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120-150 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint, applying plaster of paris putty to prepare even and smooth, two coats of primer suitable for board, painting two or more coats with premium acrylic emulsion paint having VOC content less than 50 grams/litre of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge Note: The plan area only will be measured for payment
141.05
-
-
od278499/2019_2020 : Providing and fixing false ceiling using 12.5 mm thick fully perforated gypsum plaster board having approx 15% perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturer's specification, with all side tapered and backed by acoustical tissue with NRC value not less than 0.60 at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120-150 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint, applying plaster of paris putty to prepare even and smooth if required, two coats of primer suitable for board, painting two or more coats with premium acrylic emulsion paint having VOC content less than 50 grams/litre of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge Note: The plan area only will be measured for payment
50
-
-
od279313/2019_2020 : Providing and fixing tiled false ceiling at all heights with GI Metal Ceiling Lay in perforated Tegular global white color tiles of size 595x595 mm and 0.5mm thick with 8 mm dr op; made of GI sheet having glavanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyster powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece , to be laid in true horizontal level, suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.
851.4
-
-
od292647/2019_2020 : Providing and fixing tiled false ceiling at all heights with GI Metal Ceiling Lay in perforated Tegular global white color tiles of size 1195x595 mm and 0.5mm thick with 8 mm dr op; made of GI sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyster powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece , to be laid in true horizontal level, suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x38 mm of length 3000 mm, cross - T of size 15x38 mm of length 1200 mm and secondary intermediate cross-T of size 15x38 mm of length 600mm to form grid module of size 1200 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.
174.24
-
-
od292730/2019_2020 : Providing and fixing of 150 mm width Armstrong Techzone (Module TZ4) or approved equivalent Suspended ceiling system as per ceiling drawings. The Techzone orientation shall be such that the main runners run parallel or perpendicular to the technical zone as indicated in the ceiling drawings. The 150mm wide technical zone formed is where the technical elements like lighting fixtures, HVAC diffusers, etc would be installed. Where there are no technical elements the technical zone would be covered by using Metal Technical Panels of size 1200mm x150mm in conjunction with a special 150mm long cross tee, interlocked at every 1200mm in the technical zone. The rate shall include cost for all hardwares, scaffolding etc and work shall be undertaken as per manufactures specification and as per direction of Engineer-in-charge
15.84
-
-
od279314/2019_2020 : Providing and fixing tiled false ceiling at all heights with GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm deep; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending to be laid in true horizontal level, suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.
110.88
-
-
od279332/2019_2020 : Providing and fixing false ceiling tiles with 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.7) at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance more than 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 & 7) in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm ) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2mm, spaced at 1200 mm centre to centre along main The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the Engineer-in-charge.
33.48
-
-
od279333/2019_2020 : Providing and fixing false ceiling tiles 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance more than 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 & 7) in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm ) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main . The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the Engineer-in-charge.
70.2
-
-
od279999/2019_2020 : Providing and fixing acoustical ceiling clouds manufactured from high density glass wool (Armstrong Soundscapes/ Saint Gobain Ecophon Solo make or equivalent) of 1200 mm size in circular shape fixed as per manufacturer’s specification and installation to be carried out by manufacturer’s trained installation team along with cost of all accessories for hanging, fixing, installation, labour charges, scaffolding etc complete as per manufacturer’s procedure and as per directions of Engineer-in-charge
10
-
-
od311867/2019_2020 : Providing and fixing acoustical ceiling clouds manufactured from high density glass wool (Armstrong Soundscapes/ Saint Gobain Ecophon Solo make or equivalent) of 1800 x 1200 mm size in rectangular shape and manufacturer's recommended accessories for fixing and fixed as per manufacturer’s specification and installation to be carried out by manufacturer’s trained installation team along with cost of all accessories for hanging, fixing, installation, labour charges, scaffolding etc complete as per manufacturer’s procedure and as per directions of Engineer-in-charge
8
-
-
od311868/2019_2020 : Providing and fixing acoustical ceiling clouds manufactured from high density glass wool (Armstrong Soundscapes/ Saint Gobain Ecophon Solo make or equivalent) of 1040 x 1200 mm size in hexagonal shape and manufacturer's recommended accessories for fixing and fixed as per manufacturer’s specification and installation to be carried out by manufacturer’s trained installation team along with cost of all accessories for hanging, fixing, installation, labour charges, scaffolding etc complete as per manufacturer’s procedure and as per directions of Engineer-in-charge
8
-
-
od311873/2019_2020 : Providing & fixing suspended ceiling comprising of Armstrong make or equivalent Vertical Linear Baffle Ceiling made out of Aluminum Extrusion in Aluminum alloy grade 6063 T5 in triangular pattern using baffle blades of size 25x150x3600mm in powder coated to Woodgrain finish – Red Oak or Cherry. The baffle blade shall be suspended using Slotted U-profile of 20 x 30 x 3700 mm (thk – 1.5 mm) having slots in module of 25mm. Longer lengths of Baffle to be connected by Baffle Joiner and the ends to be fixed with End caps. Installation of U-Grid: The U profile to be suspended at every 1200mm centre to centre using 6mm threaded rod from the structural soffit using U-profile hanger. Installation of Parallel Armstrong Baffles: Locate the slot for Baffle Hangers in U Profile section at 1200mm centers. Hangers are fixed into the slot, then rotated 90° and fixed into position by tightening the grub screw. Baffle to be lifted into position and hangers engage over lip of U-Grid Channel. Each Hanger to be secured into position by fixing the Locking Clip. When doing continuous installation, Baffles blades are to be connected at ends with Baffle Joiner, which are fixed into the top and bottom slots of the Baffle closed profile for alignment only. The bottom Joiner to be located first and fastened on one side only. The top Joiner to be fitted then and secured with grub screws on one side. Then the two Baffle sections shall be joined and the top Joiner is screw fastened on the 2nd Baffle profile. End Caps to be located by pushing the End Cap tongues into open Baffle slots. Installation of Non-Parallel Armstrong Baffles: The Non-parallel Baffles shall be measured and cut at specified angles, using appropriate machinery. Hook-Over end caps shall then be connected at the two ends of each baffles. This assemble shall be hooked and placed on top of the parallel baffles. The baffles shall then fixed into position using appropriate fasteners (as guided by the shop drawings). Installation should be carried out as per Armstrong recommended procedure. The Baffle along with suspension system used together shall carry a 10 year warranty against manufacturing defect and manufacturer shall provide a warranty certificate. The supply shall be backed by a Manufacturing Test Certificate.
174.4
-
-
od317009/2019_2020 : Providing and fixing Pelmet for concealing the pull-down projector screens and blinds. The pelmet shall be made of 19mm thick BWR. ply finished with enamel paint of approved shade. It shall be of 'U' shape of size 150 x 150 mm and its bottom level shall be fixed flush with the adjoining false ceiling level so as to recess the pelmet. Rate to include all hardware and supports for sufficient rigidity and to receive the false ceiling perimeter channels.
363.66
-
-
od294079/2019_2020 : Providing and fixing 12 mm thick frameless toughened patch fitting glass door with fixtures of Dorma make or equivalent, including providing and fixing patch fittings, floor spring with SS cover plate suitable for the door size and weight, lock with euro profile cylinder keys 3 nos, strike patch for lock, 600 mm pull handle SS Satin finish of shape to be approved by Engineer-in-charge, door stopper half dome type and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge
3.78
-
-
od294080/2019_2020 : Providing and fixing 12 mm thick frameless toughened glass door with corner hinges and other fixtures of Dorma make or equivalent. The rate shall be including providing and fixing corner hinges with all accessories, , door closer with slide channel and universal saddle plate, centre lock with euro profile cylinder keys 3 nos, strike patch for lock, 600 mm pull handle SS Satin finish of shape to be approved by Engineer-in-charge, making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge
93.89
-
-
od318387/2019_2020 : Providing and fixing in position flush doors with door frame using second class teak wood, wrought framed, melamine polished and fixed in position with hold fast lugs or with dash fasteners of required dia & length and factory finished ISI marked flush door shutters 35 mm thick conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of I st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters, providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters and laminated with 1 mm thick decorative laminate sheet, vision panel to be provided with bevelled glass 8 mm thick with required lipping along with all accessories Dorma make or equivalent such as SS tubular door handle 600 mm long, brass mortise latch and lock with 6 levers without pair of handles, concealed door closer with sliding arm, hanging type floor door stopper etc complete as per directions of Engineer-in-charge
5.7
-
-
od318385/2019_2020 : Providing and fixing in position flush doors with door frame using second class teak wood, wrought framed, melamine polished and fixed in position with hold fast lugs or with dash fasteners of required dia & length and factory finished ISI marked flush door shutters 30 mm thick conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of I st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters, providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters and laminated with 1 mm thick decorative laminate sheet, including fixing with accessories such as ISI marked Stainless Steel butt hinges with necessary screws and other accessories such as round cylindrical door knob and lock, aluminium tower bolt 250x10 mm, hydraulic door closer, hanging type floor door stopper etc complete as per directions of Engineer-in-charge
19.99
-
-
od315525/2019_2020 : Supplying and installation of steel Fire door with Fire Rating of 120 minutes rating as per manufacturers specification and tested in accordance with IS 3614 Part-2 BS 476 Part-22 . (a) Fire resistant door frame made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) of section 143x57 mm having built in rebate duly filled with vermiculate based concrete mix, suitable for mounting door shutters, kerf frame fitted with intumescent fire seal strip of size 10x4 mm (minimum) all-round the frame and fixing with dash fastener of approved size and make, reinforcement pads for fixing of door closer at appropriate location, factory finished pre-punched cut-outs to receive specific hardware and ironmongery, requisite mortar guard, hinge plates predrilled to receive hinges for screw mounted fixing, minimum of five anchors per jamp suitable for adjoining wall construction, etc as per site conditions, Grouting the frame with cement slurry including providing necessary Hilti make Intumescent Joint Filler - code no CP 606 or Wacker - R - Glazing & Metal (Elastomeric / Intumescent) in the gaps between Wall & Frame to the required thickness and to be applied by using suitable Dispenser tool etc complete as per manufacture's specification. (b) Fire door shutters to be manufactured from 16 SWG G.I. sheets(zinc coating not less than 120 gm/sqm) to be press formed to 50 mm thick double skin hollow door with lock seam joints at stile edges with a bending radius of 1.4 mm, with internal reinforcement at top, bottom and stile edges made out of 16 SWG G.I. sheet duly filled FR insulation material (96 kg/cum density), the door face should not have visible screws or fasteners on either face and the doors to have pre-drilled hinge plates with hinge guard covers, fixing with necessary stainless steel ball bearing hinges in the factory prepared pre-punched cut-outs and reinforcements, locks with concealed lock box with lock fixing brackets with pre-tapped holes, door closer reinforcement pads at appropriate location (c) Vision panel of size 200x600 mm using 6 mm clear fire resistant glass fixed with GI beading of appropriate size, fire resistant sealant, beading, screws from inside etc. The rate shall also include provision for finishing with zinc phosphate storing primer and powder coated in not less than 30 micron in desired shade as per NBC 2016, IS 16231 (Part 3):2016. The rate shall also include provision for required fittings such as door closers, panic bar / latch (Double point ) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer -in-charge, all complete. Rate shall be inclusive of making required provisions for fixing access control unit.
18.9
-
-
od315528/2019_2020 : Providing and fixing fire resistant door having 120 minutes fire rating with frame of section 50 x 60 mm on horizontal side 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/m2) suitable for mounting 120 min Fire Rated Door Shutters , filled with Mineral wool Insulation having density min 96Kg/m2, fixing with G.I. Anchor fasteners (5 each on vertical style & 3 on horizontal style of size M10 x 80 ) in the opening along with Factory made templates for fixing hinges, door closers etc, fixing 60 mm thick fire resistant door shutters of 120 min fire rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make. The door frame and shutter shall be finished with approved fire resistant primer and powder coated in not less than 30 micron in desired shade as per NBC 2016, IS 16231 (Part 3):2016. The rate shall also include provision for required fittings such as lock and handle of reputed brand and manufacture to be approved by the Engineer -in-charge, all complete.
26.1
-
-
9.121 : Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
209.16
-
-
9.122.2 : Providing and fixing to existing door frames.30 mm thick Fiberglass Reinforced Plastic (F.R.P) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used all filler material throughout the hollow panel, casted monoolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS : 14856, complete as per direction of Engineer-in-charge.
66.15
-
-
od296263/2019_2020 : Providing & fixing Modular Toilet cubicles of MERINO BESCO make of TITAN 12mm STD SERIES or approved Equivalent - complete set including partitions and S.S 304 grade Accessories such as Top Rail, Coat hook with Door stopper, Occupancy indicator, Door Knob, 'U' Channel, 'F' Channel, screws, Adjustable Legs, etc complete and with Rubber strip for the groove in the Pilaster for reducing noise. The cubicle shall be of Pilaster & S.S Leg Floor-mounted type with overhead bracing taking into consideration the stability of the panels. Top bracing shall be connected to the wall for additional support and stability. Wall brackets and corner brackets to be used while assembling the cubicles. In addition, the door should have a self-closing hinge and an indicator slip latch or bolt with a knob outside and 2 coat hooks inside. Note: Contractor to submit shop drawing for approval before start of works. The panels and doors shall be constructed out of 12mm thick Compact Laminate of approved shade.a) Compartment depth & width: as per the drawings / site measurement b) Door width: 600 mm c) Overall Height : 1980 mm (including bottom gap of 150 mm)
8
-
-
od316663/2019_2020 : Providing and fixing of Honeycomb blinds made of Original Non-woven honeycomb shades having soft fabric appearance and high energy-efficient fabric with high tear strength constructed out of Anti static, resilient, colour fast & sanitized treat 100% spun bonded non-woven polyester fiber & precision manufactured to form a hexagonal shaped duette pleat . Pleat dimension ¾”Honeycomb within a Honeycomb” with 3 distinct air pockets for superior energy efficiency and increased insulation. Shadings are duotone, with neutral tone facing the exterior and color facing the interior .Being a Low shading co-efficient will have following Comfort rating & solar optical properties. Fixing with easy drive operating system having HEADRAIL measuring 49.68 wide and 36.66mm deep & thick 1.27mm extruded from 6063 T6 alu. alloy & shall be powder coated to a smooth finish with a thickness of 40 microns. All cords & cord holes shall be fully concealed inside the fabric structure. As each of the hexagonal cells is formed individually, pleats operate independent of each other providing superior pleat retention & structure strength. INSTALLATION BRACKETS shall be of high tension spring steel suitable for overhead & wall mounting 30mm Duette Hartford mounting bracket. POLYESTER CORD shall be 0.9mm in diameter & of woven hollow core. ENDCAP shall be molded acrylic color matched to the head & bottom rails. BOTTOM RAIL shall be a single channel section, measuring 30mm wide and 12.5mm deep & thickness 1-1.2mm extruded from 5005 H-16 alu. alloy & shall be powder coated with a smooth finish to a thickness of 15-25 microns. HOLD-DOWN BRACKET (optional) shall be molded in clear acrylic. It incorporates a pin for engagement with the bottom rail end-cap. It shall be suitable for sill, face or side facing. CORD.EQUILISER shall be injection molded from impact modified acrylic with a high flexural modulus. Approved make: Hunter Douglas, Phifer, Vista or equivalent.<br><br> as per Manufacturer's instruction of approved make (Hunter Douglas Roller shades/ PHIFER / VISTA or equivalent) as per manufacturer's specification etc complete as per directions of Engineer-in-charge .
172.8
-
-
od316664/2019_2020 : Providing and fixing of roller blinds with chain driven system with total Block-out Fabric of approved shade made of 100% polyester, Fabric width upto 200/250 cm, Fabric weight 270-295 g/sq.m, Thickness 0.57mm and Colour Fastness > 6, installed with control clutch drive unit engineered heavy duty chain drive pulley operating system as per Manufacturer's instruction of approved make (Hunter Douglas Roller shades/ PHIFER / VISTA or equivalent) as per manufacturer's specification etc complete as per directions of Engineer-in-charge .
243.16
-
-
od316665/2019_2020 : Providing and fixing etching to glass panels using 3M frosted film (sparkling type) of Code No. 7725 with 15 years warranty, as per required pattern and design and as directed. Rate shall be inclusive of all wastages, etc. Note : Only the actual installed area shall be measured for payment.
259.93
-
-
od316666/2019_2020 : Providing and fixing etching to glass panels using 3M film (Code No. 7725 with 5 years warranty) of approved color printed graphics as directed. Rate shall be inclusive of all wastages, etc. Note : Only the actual installed area shall be measured for payment.
23.43
-
-
od317042/2019_2020 : Providing and fixing pin up board to detail 9mm thick soft board wrapped with Response fabric to be fixed on steam beach wooden beading framework. ( Basic cost of fabric- 150-/ metre)
14.04
-
-
od317440/2019_2020 : Providing & fixing 6 mm thick lacquered glass of (Saint Gobain or app. equivalent) and of approved shade as per pattern and details given in drawing, fixed with compatible SGG Glassmate Ultrafix - Neutral Alkoxy based Silicone having Shear Bond Strength (Dry, 24 hours), greater than 450 kpa and tack free time of 10 to 30 mins compatible for installation of mirror and lacquered glass / SGG Glassmate Mirror mounting tape MIRROR MOUNTING TAPE - Foam based double sided adhesive tape for instantaneous adhesion, compatible with mirror and lacquered glass having Shear bond strength (Dry, 15 mins) of 250 to 350 kpa) on a perfectly leveled surface. The contractor should submit test reports for back painted glass from manufacturer - High humidity Resistance (conforms to BS EN 1036 1999); Color fastness ISO 105B02 standard & Mechanical Resistance ISO 7784 ( Taber Abrasion test ) ISO 2409 ( Cross Hatch Test ) standard The manufactured back painted glass should be environmentally friendly (no lead, no arsenic, no copper, no formaldehyde); appropriate recycled content (12% post industrial / 6% post consumer); compressive strength (1000 MPa) & tensile strength (40 MPa),same as float glass, etc all complete as directed and to the satisfaction of the Engineer-in-charge. Rate to include all wastages, necessary supports & backing to ensure rigidity, levels & plumb, etc complete.
32.4
-
-
od317043/2019_2020 : Providing & fixing 6 mm thick lacquered glass of (Saint Gobain or app. equivalent) and of approved shade as per pattern and details given in drawing. Glasses are to be fixed with a revolutionized system made of safe, eco friendly light weight, ultra strong transparent polymer clips ( Single Sided J1 & J2 Type, Double sided I Type ), white backing foam and grey impact absorbing foam; to accommodate upto ± 5mm substrate undulation, and with a horizontal load capacity of 30Kg/100mm and vertical pullout load > 200kg/100mm, Glass should be supported with 1mm thick lip covering upto 3mm of glass surface; clips should be fixed using durable, non corrosive, strong screw 45mm long. etc all complete as directed and to the satisfaction of the Engineer-in-charge. Rate to include all wastages, necessary supports & backing to ensure rigidity, levels & plumb, etc complete.
10.8
-
-
od317044/2019_2020 : Supply & fixing of 9 mm thick PET Acoustic Panels of approved make on Partition / Masonry wall surface and as directed using appropriate adhesive as per manufacturer instructions and edging profiles of natural anodised aluminium edging with counter sunk holes punched every 300mm. The rate shall be inclusive of preparing the base surface, all wastages, etc. Note : Only the actual installed area shall be measured for payment.
28
-
-
od317441/2019_2020 : Providing and fixing mirror of superior glass 6 mm thick ( of approved quality) and of required shape and size over 12mm PVC panel of approved make with S.S studs at Handwash area. The mirror shall be provided with polythene sheet backing so as to avoid direct contact of moisture with the silver coating on the mirror rear side. Rate shall be inclusive of all hardware, labour, etc, complete.
36.08
-
-
PLUMBING AND SANITARY
-
-
-
od301709/2019_2020 : Providing and fixing of glazed under counter wash basin 550x410 mm size with pressmatic pillar cock , CP waste with overflow (pop-up), 32mm dia CP bottle trap with extension pipe, supporting CI bracket to support basin, 1 No. 15mm CP angle valve with 450mm long connection pipe and CP wall flanges, all complete set of approved make and as per directions of Engineer-in-charge.
41
-
-
od303383/2019_2020 : Providing and fixing one piece washbasin with integrated half pedestal of approved make and colour along with CP fittings of approved make such as 15mm CP brass pillar cock pressmatic, 15mm CP brass angular stop cock, 32mm dia CP brass waste coupling, 32mm dia CP brass bottle trap with extension pipe including necessary supporting brackets, connection tube etc; complete. The supporting brackets, bolt and nuts supplied by the contractor. Works including cutting and making good the walls /floor wherever required, including conveyance of all materials to the site, all labour charges, all taxes etc; complete.
2
-
-
od301710/2019_2020 : Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink of size 510x1040 mm bowl depth 250 mm as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, 32mm dia CP bottle trap with extension pipe, 1 No. 15mm CP angle valve with 450mm long connection pipe and CP wall flanges, all complete set of approved make including painting of fittings and brackets, cutting and making good the walls wherever required and as per directions of Engineer-in-charge
6
-
-
od301715/2019_2020 : Providing, fixing, testing and commissioning of white vitreous china glazed wall mounted water closet (European type) of approved make (Jaquar make Continental series cat no:CNS-WHT-963NS or equivalent) with concealed cistern (Jaquar make code JCS-WHT-2400WS or equivalent) and flushing plate (Jaquar make code : JCP-CHR-852415 or equivalent) with necessary water connection with integrated angle stop valve production cover for service opening to be cut to the length, WC outlet bend, WC connection set dia 90mm, 2 threaded rods M12 for ceramics fastening,4 adjustable fastening brackets, with fastening materials, with actuator plate, complete and the EWC shall be with necessary check nut, stopcock etc., soft close seat cover, CP brass hinges and rubber buffers, Concealed flushing cistern with fittings supporting bolt /CI / MS brackets. etc. cutting and making good the walls and floors wherever required all complete as per specification and direction of the Engineer-in-charge
47
-
-
od301721/2019_2020 : Providing and fixing white vitreous urinal of approx. size 370x315x620 mm with inlet from back side and pressmatic auto closing concealed urinal flush valve with wall flange (Jaguar make or equivalent), including fixing to wall with suitable brackets all as per manufacturers specification and as per directions of Engineer-in-charge
16
-
-
od301725/2019_2020 : Supplying and fixing CP Sink cock with regular swinging spout (wall mounted model) with wall flange (Model no. LYR-38347S Jaquar make or equivalent) including cost of materials and labour charges etc complete as per the direction of Engineer-in-charge.
6
-
-
18.51.1 : Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore
5
-
-
od301743/2019_2020 : Supplying and fixing CP Health Faucet and angle valve with wall flange of superior quality ( Jaguar or equivalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
47
-
-
od302108/2019_2020 : Providing and fixing CP Brass toilet paper holder of superior quality (Jaguar or equivalent make) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
47
-
-
od302117/2019_2020 : Supplying and fixing CP Towel rod 60cm or nearest available length Jaquar make or equivalent including cost of materials and labour charges etc complete as per the direction of Engineer-in-charge.
16
-
-
od302118/2019_2020 : Supplying and fixing CP Towel ring round Jaquar make or equivalent including cost of materials and labour charges etc complete as per the direction of Engineer-in-charge.
3
-
-
od302119/2019_2020 : Supplying and fixing CP Robe hook Jaquar make or equivalent including cost of materials and labour charges etc complete as per the direction of Engineer-in-charge.
39
-
-
17.28.1.1 : Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC.
waste fittings complete.Semi rigid pipe32 mm dia
5
-
-
od308319/2019_2020 : Supplying and fixing stainless steel Grab bar 600 mm long (Jaquar make or equivalent) including cost of materials and labour charges etc complete as per the direction of Engineer-in-charge.
4
-
-
od308320/2019_2020 : Supplying and fixing stainless steel Grab bar 450 mm long (Jaquar make or equivalent) including cost of materials and labour charges etc complete as per the direction of Engineer-in-charge.
4
-
-
od308321/2019_2020 : Providing and fixing wall mounted ABS thermoplastic paper towel dispenser of approved make including fixing in position as per directions of Engineer-in-charge
10
-
-
od308322/2019_2020 : Providing and fixing wall mounted Hand dryer one-piece cover in ABS thermoplastic fixed to the base by two screws, thermoplastic PP + talcum base, Class B brush motor incorporating a safety thermal cut-off, PP UL94-V0 helicoidal fan wheel, heating element with a safety thermal cut-off, Electronic infrared detection sensor with an adjustable detection distance(15-25 cm) (Jaquar make or equivalent) including fixing in position as per directions of Engineer-in-charge
6
-
-
od308323/2019_2020 : Providing and fixing wall mounted ABS thermoplastic liquid soap dispenser with push button 0.8 l capacity (Jaquar make or equivalent) including fixing in position as per directions of Engineer-in-charge
10
-
-
18.8.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes
187
-
-
18.8.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes
304
-
-
18.8.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.32 mm nominal outer dia pipes
54
-
-
18.9.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work20 mm nominal outer dia pipes
45
-
-
18.9.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work25 mm nominal outer dia pipes
45
-
-
18.9.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work32 mm nominal outer dia pipes
45
-
-
18.9.5 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work40 mm nominal outer dia pipes
54
-
-
od301866/2019_2020 : Providing and fixing PVC floor trap of self cleansing design and CP Anti cockroach floor trap consisting of floor drain hinged grating, inner filter, out filter, rim etc complete, fixed over the floor trap. Work includes cleaning of floor traps before fixing the gratings. While fixing the gratings, flooring should be cut to required size of grating, (not more than 2mm of the grating sizes) using tile cutter etc; complete. The gap should be filled silicon sealant/epoxy grout to match the flooring colour. The colour and shape of the gratings shall be as per the approval from the Engineer-in-charge. To avoid damage of the CP gratings, acid cleaning of flooring shall be done before fixing of gratings.
47
-
-
od301867/2019_2020 : Providing and fixing Stainless Steel AISI 304(18/8) Floor Cleanout dummy/inactive Drain Cover fixed with SS screws suitable for drain pipe size 4" etc complete as per directsions of Engineer-in-charge. While fixing the gratings, flooring should be cut to required size of grating, (not more than 2mm of the grating sizes) using tile cutter etc; complete. The gap should be filled with epoxy grout/silicon sealant to match the flooring color. The color and shape of the gratings shall be as per approval from the Engineer-in-charge. To avoid damage of the cleanout, cleaning of flooring shall be done before fixing of cleanout.
26
-
-
od301868/2019_2020 : Providing and fixing 20 mm nominal bore ball valve (brass) of approved quality complete as per directions of Engineer-in-charge
12
-
-
od301869/2019_2020 : Providing and fixing 25 mm nominal bore ball valve (brass) of approved quality, complete as per directions of Engineer-in-charge
12
-
-
18.17.2 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore
8
-
-
18.17.3 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore
8
-
-
od315408/2019_2020 : Providing, fixing and testing of approved make of 40 mm dia SWR - B- Class PVC pipes and fittings confirming to IS 13592-1992. and fittings (available fittings in market and fabricated fittings ) such as tee, elbow, coupler, etc. conforming to 14735 with latest amendment for soil and waste pipe works in toilets and utility area,etc. Pipes shall be laid in vertical stack and sunken in floors as per approved drawings with proper alignment and gradient as per the drawings with proper split clamp,anchor fastener and 10 mm thread rod supports. Wall cutting shall be done using wall cutting machine, and chasing to be done using electric jack hammer machine. Cutting and chasing with hammer shall not be permitted. Pipes and fittings shall be cleaned with pipe cleaners and joined by approved approved make solvent cement. After laying the pipes, before closing the pipes, gravity test to be conducted and get the approval from the Engineer-in-charge. Chased portions shall be covered with cement mortar. Work includes making required size holes in brick walls wherever necessary and re do same with water proofing components to the entire satisfaction of Engineer-in-charge.etc complete. All the stub outs shall be closed with proper end caps till of installation of sanitary wares and accessories etc. complete.
44
-
-
od315409/2019_2020 : Providing, fixing and testing of approved make of 50 mm dia SWR - B- Class PVC pipes and fittings confirming to IS 13592-1992. and fittings (available fittings in market and fabricated fittings ) such as tee, elbow, coupler, etc. conforming to 14735 with latest amendment for soil and waste pipe works in toilets and utility area,etc. Pipes shall be laid in vertical stack and sunken in floors as per approved drawings with proper alignment and gradient as per the drawings with proper split clamp,anchor fastener and 10 mm thread rod supports. Wall cutting shall be done using wall cutting machine, and chasing to be done using electric jack hammer machine. Cutting and chasing with hammer shall not be permitted. Pipes and fittings shall be cleaned with pipe cleaners and joined by approved approved make solvent cement. After laying the pipes, before closing the pipes, gravity test to be conducted and get the approval from the Engineer-in-charge. Chased portions shall be covered with cement mortar. Work includes making required size holes in brick walls wherever necessary and re do same with water proofing components to the entire satisfaction of Engineer-in-charge.etc complete. All the stub outs shall be closed with proper end caps till of installation of sanitary wares and accessories etc. complete.
34
-
-
od315410/2019_2020 : Providing, fixing and testing of approved make of 75 mm dia SWR - B- Class PVC pipes and fittings confirming to IS 13592-1992. and fittings (available fittings in market and fabricated fittings ) such as tee, elbow, 'y' , coupler, etc. conforming to 14735 with latest amendment for soil and waste pipe works in toilets and utility area,etc. Pipes shall be laid in vertical stack and sunken in floors as per approved drawings with proper alignment and gradient as per the drawings with proper split clamp,anchor fastener and 10 mm thread rod supports. Wall cutting shall be done using wall cutting machine, and chasing to be done using electric jack hammer machine. Cutting and chasing with hammer shall not be permitted. Pipes and fittings shall be cleaned with pipe cleaners and joined by approved approved make solvent cement. After laying the pipes, before closing the pipes, gravity test to be conducted and get the approval from the Engineer-in-charge. Chased portions shall be covered with cement mortar. Work includes making required size holes in brick walls wherever necessary and re do same with water proofing components to the entire satisfaction of Engineer-in-charge.etc complete. All the stub outs shall be closed with proper end caps till of installation of sanitary wares and accessories etc. complete.
280
-
-
od315411/2019_2020 : Providing, fixing and testing of approved make of 110 mm dia SWR - B- Class PVC pipes and fittings confirming to IS 13592-1992. and fittings (available fittings in market and fabricated fittings ) such as tee, elbow, 'y' , coupler, etc. conforming to 14735 with latest amendment for soil and waste pipe works in toilets and utility area,etc. Pipes shall be laid in vertical stack and sunken in floors as per approved drawings with proper alignment and gradient as per the drawings with proper split clamp,anchor fastener and 10 mm thread rod supports. Wall cutting shall be done using wall cutting machine, and chasing to be done using electric jack hammer machine. Cutting and chasing with hammer shall not be permitted. Pipes and fittings shall be cleaned with pipe cleaners and joined by approved approved make solvent cement. After laying the pipes, before closing the pipes, gravity test to be conducted and get the approval from the Engineer-in-charge. Chased portions shall be covered with cement mortar. Work includes making required size holes in brick walls wherever necessary and re do same with water proofing components to the entire satisfaction of Engineer-in-charge.etc complete. All the stub outs shall be closed with proper end caps till of installation of sanitary wares and accessories etc. complete.
145
-
-
od315448/2019_2020 : Providing, fixing and testing of approved make of 160 mm dia SWR - B- Class PVC pipes and fittings confirming to IS 13592-1992. and fittings (available fittings in market and fabricated fittings ) such as tee, elbow, 'y' , coupler, etc. conforming to 14735 with latest amendment for soil and waste pipe works in toilets and utility area,etc. Pipes shall be laid in vertical stack and sunken in floors as per approved drawings with proper alignment and gradient as per the drawings with proper split clamp,anchor fastener and 10 mm thread rod supports. Wall cutting shall be done using wall cutting machine, and chasing to be done using electric jack hammer machine. Cutting and chasing with hammer shall not be permitted. Pipes and fittings shall be cleaned with pipe cleaners and joined by approved approved make solvent cement. After laying the pipes, before closing the pipes, gravity test to be conducted and get the approval from the Engineer-in-charge. Chased portions shall be covered with cement mortar. Work includes making required size holes in brick walls wherever necessary and re do same with water proofing components to the entire satisfaction of Engineer-in-charge.etc complete. All the stub outs shall be closed with proper end caps till of installation of sanitary wares and accessories etc. complete.
58
-
-
od317467/2019_2020 : Making connection of drain or sewer line with existing lines including breaking into and making good the walls, floors with cement concrete 1:2:4 mix( 1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete as per directions of Engineer-in-charge
30
-
-
ELECTRICAL
-
-
-
od272876/2019_2020 : DISTRIBUTION BOARD Supply, erection, earthing, testing and commissioning of the following MCB DB IP 42 Protection Metal Door powder coated including all interconnections and accessories like bolts, nuts and associated civil works. MCB DBs shall have comprising as follows: Double glazed Concealed in wall. All DBs are with acrylic doors.VDB -6W TPN Vertical MCCB DB;Incoming: 1no - 100A TPN MCCB &lOutgoing: 6nos - 63A TPN MCB
10
-
-
od273499/2019_2020 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required.VDB -4W TPN Vertical MCCB DB Incoming: 1no - 100A TPN MCCB Outgoing: 2nos - 63A TPN MCB 2nos - 40A DP MCB
4
-
-
od273502/2019_2020 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required<br>LDB -4W TPN Phase segregated MCB DB Incoming: 1no - 40A TPN MCB Outgoing: 3nos - 25A DP ,30mA RCBO, 12nos - 6/20A SP MCB
5
-
-
od273506/2019_2020 : DISTRIBUTION BOARD Supply, erection, earthing, testing and commissioning of the following MCB DBs IP 42 Protection Metal Door powder coated including all interconnections and accessories like bolts, nuts and associated civil works. MCB DBs shall have comprising as follows: Double glazed Concealed in wall. All DBs are with acrylic doors LDB -6W TPN Phase segregated MCB DBs Incoming: 1no - 40A TPN MCB Outgoing: 3nos - 25A DP ,30mA RCBO, 18nos - 6/20A SP MCB
5
-
-
od273508/2019_2020 : DISTRIBUTION BOARD Supply, erection, earthing, testing and commissioning of the following MCB DBs IP 42 Protection Metal Door powder coated including all interconnections and accessories like bolts, nuts and associated civil works. MCB DBs shall have comprising as follows: Double glazed Concealed in wall. All DBs are with acrylic doors PDB - 6W TPN Phase segregated MCB DB ;Incoming: 1no - 63A TPN MCB Outgoing: 3nos - 63A DP ,100mA RCBO,18nos - 16/20A SP MCB
12
-
-
od273510/2019_2020 : DISTRIBUTION BOARD Supply, erection, earthing, testing and commissioning of the following MCB DB;s IP 42 Protection Metal Door powder coated including all interconnections and accessories like bolts, nuts and associated civil works. MCB DBs shall have comprising as follows: Double glazed Concealed in wall. All DBs are with acrylic doors UPSDB -6W TPN Phase segregated MCB DB Incoming: 1no - 40A TP+2N MCB ;Outgoing: 3nos - 25A DP MCB , 18nos - 6/16/20A SP MCB
12
-
-
od273512/2019_2020 : DISTRIBUTION BOARD Supply, erection, earthing, testing and commissioning of the following MCB DBs IP 42 Protection Metal Door powder coated including all interconnections and accessories like bolts, nuts and associated civil works. MCB DBs shall have comprising as follows: Double glazed Concealed in wall. All DBs are with acrylic doors ELDB 8Way 1Ph - Incoming: 1no – 25A DP 30ma RCBO Outgoing: 6nos 6/10A MCB
2
-
-
od273515/2019_2020 : DISTRIBUTION BOARD Supply, erection, earthing, testing and commissioning of the following MCB DBs IP 42 Protection Metal Door powder coated including all interconnections and accessories like bolts, nuts and associated civil works. MCB DBs shall have comprising as follows: Double glazed Concealed in wall. All DBs are with acrylic doors ELDB 10Way 1Ph - Incoming: 1no 25A DP 30ma RCBO;Outgoing: 8nos – 6/10A MCB
1
-
-
od296309/2019_2020 : PANEL -FLOOR EB PANEL1, -9F -WING A Design, Manufacture, supply, installation, Testing, Commissioning and earthing of the Floor panel - Lighting with necessary metal base frames, free standing dust and vermin proof by construction of 14 / 16 SWG CRCA sheets with bolted construction powder coated panel incoming and outgoing breaker details as per the technical specification, MCCB shall have inbuilt shunt trip coil SLD & as mentioned below. All breaker should provide free potential contact for status monitoring through BMS for ON/OF and trip status separate compartment All the meter should have RS 485 Modbus output for BMS integration.INCOMER:-1 No 250A 4P 35KA MCCB with Over current and short circuit release,1 Set – 250/5A CT CL 0.5s 15VA for metering,1 No.L and T cat Gemini model tested energy meter( MDM) with RS485 port, With sealing provision ,3 Sets LED type RYB indication lamp with control MCBs,3 Sets – LED type ON, OFF ,TRIP indication lamp with control MCBs.;OUTGOING:-8Nos -100A TP+N 25KA MCCB with Over current and short circuit release WITH tested energy meter (TVM/TOD) with RS485 port, suitable CTs Class .5s with sealing provision for meters, each with 1 Sets LED type RYB indication lamp with control MCBs, ON,OFF,TRIP.BUS BAR RATING :One set: 300A TPN 25KA for 1 sec. Aluminium bus bars with colour coated heat shrinkable PVC sleeves with DMC/SMC bus bar supports and suitable earth bus,PH: 1R 40 x 10mm Al.Flat,N:1R 20 x 10mm Al.Flat, Earth:1R 25 x 3mm Cu.Flat.
1
-
-
od296388/2019_2020 : PANEL -FLOOR EB PANEL1, -9F -WING B Design, Manufacture, supply, installation, Testing, Commissioning and earthing of the Floor panel - Lighting with necessary metal base frames, free standing dust and vermin proof by construction of 14 / 16 SWG CRCA sheets with bolted construction powder coated panel incoming and outgoing breaker details as per the technical specification, MCCB shall have inbuilt shunt trip coil, SLD & as mentioned below. All breaker should provide free potential contact for status monitoring through BMS for ON/OF and trip status separate compartment All the meter should have RS 485 modbus output for BMS integration.;INCOMER:-1 No – 250A 4P 35 KA MCCB with Over current and short circuit release,1 Set 250/5A CT CL 0.5s ,15VA for metering,1 No.L and T cat Gemini model tested energy meter( MDM) with RS485 port, With sealing provision ,3 Sets. LED type RYB indication lamp with control MCBs,3 Sets – LED type ON, OFF ,TRIP indication lamp with control MCBs.&;OUTGOING:-6Nos -100A TP+N 25KA MCCB with Over current and short circuit release with tested energy meter (TVM/TOD) with RS485 port, suitable CTs Class .5 with sealing provision for meters, each with 1 Sets – LED type RYB indication lamp with control MCBs,ON,OFF,TRIP;BUS BAR RATING: One set: 300A TPN 25KA for 1 sec. Aluminium bus bars with colour coated heat shrinkable PVC sleeves with DMC/SMC bus bar supports and suitable earth bus,PH: 1R 40 x 10mm Al.Flat,N:1R 20 x 10mm Al.Flat, Earth:1R 25 x 3mm Cu.Flat.
1
-
-
od300458/2019_2020 : PANEL -DG PANEL -9F -WING A Design,Manufacture,supply, installation, Testing, Commissioning and earthing of the Floor panel - Lighting with necessary metal base frames, free standing dust and vermin proof by construction of 14 / 16 SWG CRCA sheets with bolted construction powder coated panel incoming and outgoing breaker details as per the technical specification, SLD as mentioned below.All breaker should provide free potential contact for status monitoring through BMS for ON/OF and trip status seperate compertment All the meter should have RS 485 modbus output for BMS integration,INCOMER:-1 No – 250A 4P 25 KA MCCB,1 Set –250/5A CT CL 0.5.0 15VA for metering,1 No. Tested energy meter ( MFM/TOD) with RS485 port, With sealing provision ,3 Sets – LED type RYB indication lamp with control MCBs,3 Sets – LED type ON, OFF ,TRIP indication lamp with control MCBs.OUTGOING : 8 Nos -100A TP+N 25KA MCCB with testedenergy meter (MFM/TOD) with RS485 port, suitable CTs Class .5 with sealing provision for meters,each with 1 Sets – LED type RYB indication lamp with control MCBs,ON,OFF,TRIP.BUS BAR RATING:One set: 300A TPN 25KA for 1 sec. Aluminium bus bars with colour coated heat shrinkable PVC sleeves with DMC/SMC bus bar supports and suitable earth bus,PH: 1R 40 x 10mm Al.Flat,N:1R 20 x10mm Al.Flat, Earth:1R 25 x 3mm Cu.Flat.
1
-
-
od296395/2019_2020 : PANEL -DG PANEL -9F -WINGB Design, Manufacture, supply, installation, Testing, Commissioning and earthing of the Floor panel - Lighting with necessary metal base frames, free standing dust and vermin proof by construction of 14 / 16 SWG CRCA sheets with bolted construction powder coated panel incoming and outgoing breaker details as per the technical specification, MCCB shall have inbuilt shunt trip coil SLD & as mentioned below. All breaker should provide free potential contact for status monitoring through BMS for ON/OF and trip status separate compartment All the meter should have RS 485 modbus output for BMS integration.INCOMER:-1 No – 250A 4P 25 KA MCCB,1 Set –250/5A CT CL 0.5.0 15VA for metering,1 No. Tested energy meter ( MFM) with RS485 port, With sealing provision ,3 Sets – LED type RYB indication lamp with control MCBs,3 Sets – LED type ON, OFF ,TRIP indication lamp with control MCBs.OUTGOING :4 Nos -100A TP+N 25KA MCCB with Tested energy meter (MFM)with RS485 port, suitable CTs Class .5s with sealing provision for meters, each with 1 Sets LED type RYB indication lamp with control MCBs, ON,OFF,TRIP.BUS BAR RATING: One set: 300A TPN 25KA for 1 sec. Aluminium bus bars with colour coated heat shrinkable PVC sleeves with DMC/SMC bus bar supports and suitable earth bus,PH: 1R 40 x 10mm Al.Flat,N:1R 20 x10mm Al.Flat, Earth:1R 25 x 3mm Cu.Flat.
1
-
-
od296405/2019_2020 : ;Design,Manufacture,supply, installation,Testing, Commissioning and earthing of the panel- with necessary metal base frames, free standing dust and vermin proof by Construction of 14 / 16 SWG CRCA sheets with bolted construction powder coated panel incoming and outgoing breaker details as per the technical specification, SLD as mentioned below 8 NOS -100 A 4POLE ATS panel WITH ADVANCED NEUTRAL Automatic/Manual with inbuilt Time delay(with Primary Protection against Single phasing- Over Voltage, Under Voltage Aux Contactor +Add on Block each 2set of RYB Indication Lamp and Power & control terminal Terminal block
1
-
-
od296415/2019_2020 : Design,Manufacture,supply, installation,Testing, Commissioning and earthing of the panel- with necessary metal base frames, free standing dust and vermin proof by Construction of 14 / 16 SWG CRCA sheets with bolted construction powder coated panel incoming and outgoing breaker details as per the technical specification, SLD & as mentioned below 6 NOS -100 A 4POLE ATS panel WITH ADVANCED NEUTRAL Automatic/Manual with inbuilt Time delay (with Primary Protection against Single phasing- Over Voltage, Under Voltage Aux Contactor +Add on Block each 2set of RYB Indication Lamp and Power & control terminal Terminal block
1
-
-
90.12.7.34 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 3.5 core 185 sq.mm
50
-
-
90.12.6.29 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required. 3.5 core 50 sq.mm
290
-
-
90.12.7.28 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 3.5 core 35 sq.mm
440
-
-
90.12.6.42 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required. 4 core 25 sq.mm
50
-
-
90.12.6.41 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required. 4 core 16 sq.mm
50
-
-
90.12.40.35 : Supply & laying of one No. PVC insulated and PVC sheathed armoured copper power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.4 core 25 sq.mm
30
-
-
90.12.41.34 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 4 core 16 sq.mm
10
-
-
90.12.41.33 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 4 core 10 sq.mm
500
-
-
90.12.41.32 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 4 core 6 sq.mm
250
-
-
od301511/2019_2020 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.;3 core 4 sq mm with factory made clamp
25
-
-
90.6.5.12 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes. 3 core 2.5 sq.mm
24
-
-
90.6.5.14 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes. 3 core 6.sq.mm
50
-
-
od274013/2019_2020 : LT CABLES Supply, Laying, Testing and Commissioning of following 1100V XLPE A2XFY (XLPE insulated Armoured Aluminium) / YFY (Armoured Copper) / YY (Unarmored/Flexible Copper) cables laid over MS supports / Cable racks / in excavated Trench / fixing of walls including clamping the cable to the support in all approved manner as all complete required (Note : Inclusive of supply of Anchor Fasteners, straight through joints and necessary 1.5mm thick GI Flat, clamps shall be included in the laying cost). 1C 10 Sq.mm. XLPE cu. FL. Cable
50
-
-
od274015/2019_2020 : LT CABLES Supply, Laying, Testing and Commissioning of following 1100V XLPE A2XFY (XLPE insulated Armoured Aluminium) / YFY (Armoured Copper) / YY (Unarmored/Flexible Copper) cables laid over MS supports / Cable racks / in excavated Trench / fixing of walls including clamping the cable to the support in all approved manner as all complete required (Note : Inclusive of supply of Anchor Fasteners, straight through joints and necessary 1.5mm thick GI Flat, clamps shall be included in the laying cost).1C 6 Sq.mm. XLPE cu. FL. Cable
450
-
-
9.1.27 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)
8
-
-
9.1.22 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm)
48
-
-
9.1.21 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm)
24
-
-
9.1.34 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm)
2
-
-
9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)
2
-
-
od274731/2019_2020 : LT CABLE TERMINATION Supply erection, Termination of PVC insulated armoured / unarmoured cables up to 1100V grade and connection of leads including the supply of Aluminum/COPPER cable lugs but including cutting stripping of cable insulation, providing double compression type glands, terminals, and armour earthing ,crimping the lug on to the conductor, clamping of the cable-cores, marking with wire number ferrules, etc.with Gland hood to be provided at the cable end entering to the Main panel and including all labour and materials complete and as per specifications of this tender and directions of Engineer-in-charge. End Termination of Cable using jointing kits & accessories as recommended by cable/ kit manufacturer. 4C 25 Sq.mm. XLPE cu. Ar. Cable
2
-
-
od274732/2019_2020 : LT CABLE TERMINATION Supply erection, Termination of PVC insulated armoured / unarmoured cables up to 1100V grade and connection of leads including the supply of Aluminum/COPPER cable lugs but including cutting stripping of cable insulation, providing double compression type glands, terminals, and armour earthing ,crimping the lug on to the conductor, clamping of the cable-cores, marking with wire number ferrules, etc.with Gland hood to be provided at the cable end entering to the Main panel and including all labour and materials complete and as per specifications of this tender and directions of Engineer-in-charge. End Termination of Cable using jointing kits & accessories as recommended by cable/ kit manufacturer.<br>4C 16 Sq.mm. XLPE cu. Ar. Cable
2
-
-
od274734/2019_2020 : LT CABLE TERMINATION Supply erection, Termination of PVC insulated armoured / unarmoured cables up to 1100V grade and connection of leads including the supply of Aluminum/COPPER cable lugs but including cutting stripping of cable insulation, providing double compression type glands, terminals, and armour earthing ,crimping the lug on to the conductor, clamping of the cable-cores, marking with wire number ferrules, etc.with Gland hood to be provided at the cable end entering to the Main panel and including all labour and materials complete and as per specifications of this tender and directions of Engineer-in-charge. End Termination of Cable using jointing kits & accessories as recommended by cable/ kit manufacturer.4C 10 Sq.mm. XLPE cu. Ar. Cable for Extract fans,,LDBs,AHUs etc
24
-
-
od274735/2019_2020 : LT CABLE TERMINATION Supply erection, Termination of PVC insulated armoured / unarmoured cables up to 1100V grade and connection of leads including the supply of Aluminum/COPPER cable lugs but including cutting stripping of cable insulation, providing double compression type glands, terminals, and armour earthing ,crimping the lug on to the conductor, clamping of the cable-cores, marking with wire number ferrules, etc.with Gland hood to be provided at the cable end entering to the Main panel and including all labour and materials complete and as per specifications of this tender and directions of Engineer-in-charge. End Termination of Cable using jointing kits; accessories as recommended by cable/ kit manufacturer.4C 6 Sq.mm. XLPE cu. Ar. Cable for Extract fans,PDBs,LDBs,AHUs etc
60
-
-
od301724/2019_2020 : LT CABLE TERMINATION Supply erection, Termination of PVC insulated armoured / unarmoured cables up to 1100V grade and connection of leads including the supply of Aluminum/COPPER cable lugs but including cutting stripping of cable insulation, providing double compression type glands, terminals, and armour earthing ,crimping the lug on to the conductor, clamping of the cable-cores, marking with wire number ferrules, etc.with Gland hood to be provided at the cable end entering to the Main panel and including all labour and materials complete and as per specifications of this tender and directions of Engineer-in-charge. End Termination of Cable using jointing kits accessories as recommended by cable/ kit manufacturer. 3Cx4 sq.mm PVC Cu. Cables
6
-
-
od274743/2019_2020 : LT CABLE TERMINATION Supply erection, Termination of PVC insulated armoured / unarmoured cables up to 1100V grade and connection of leads including the supply of Aluminum/COPPER cable lugs but including cutting stripping of cable insulation, providing double compression type glands, terminals, and armour earthing ,crimping the lug on to the conductor, clamping of the cable-cores, marking with wire number ferrules, etc.with Gland hood to be provided at the cable end entering to the Main panel and including all labour and materials complete and as per specifications of this tender and directions of Engineer-in-charge. End Termination of Cable using jointing kits & accessories as recommended by cable/ kit manufacturer.3c 2.5 sqmm cu cable
2
-
-
od274744/2019_2020 : LT CABLE TERMINATION Supply erection, Termination of PVC insulated armoured / unarmoured cables up to 1100V grade and connection of leads including the supply of Aluminum/COPPER cable lugs but including cutting stripping of cable insulation, providing double compression type glands, terminals, and armour earthing ,crimping the lug on to the conductor, clamping of the cable-cores, marking with wire number ferrules, etc.with Gland hood to be provided at the cable end entering to the Main panel and including all labour and materials complete and as per specifications of this tender and directions of Engineer-in-charge. End Termination of Cable using jointing kits accessories as recommended by cable/ kit manufacturer.3c 6 sqmm cu cable
2
-
-
od274745/2019_2020 : LT CABLE TERMINATION Supply erection, Termination of PVC insulated armoured / unarmoured cables up to 1100V grade and connection of leads including the supply of Aluminum/COPPER cable lugs but including cutting stripping of cable insulation, providing double compression type glands, terminals, and armour earthing ,crimping the lug on to the conductor, clamping of the cable-cores, marking with wire number ferrules, etc.with Gland hood to be provided at the cable end entering to the Main panel and including all labour and materials complete and as per specifications of this tender and directions of Engineer-in-charge. End Termination of Cable using jointing kits & accessories as recommended by cable/ kit manufacturer.1C 10 Sq.mm. XLPE cu. FL. Cable
2
-
-
od301600/2019_2020 : LT CABLE TERMINATION Supply erection, Termination of PVC insulated armoured / unarmoured cables up to 1100V grade and connection of leads including the supply of Aluminum/COPPER cable lugs but including cutting stripping of cable insulation, providing double compression type glands, terminals, and armour earthing ,crimping the lug on to the conductor, clamping of the cable-cores, marking with wire number ferrules, etc.with Gland hood to be provided at the cable end entering to the Main panel and including all labour and materials complete and as per specifications of this tender and directions of Engineer-in-charge. End Termination of Cable using jointing kits & accessories as recommended by cable/ kit manufacturer.1C 6 Sq.mm. XLPE cu. FL. Cable
180
-
-
od275186/2019_2020 : Supply, installation, testing and commissioning of the following MCCBs / MCBs / ISOLATORs / STARTERs of type-II coordination etc.in manufacturers sheet steel enclosures, IP 20 Protection, fixed on the concealed wall including all interconnections and accessories of 100A TPN Isolator (MCCB type) with enclosure,
2
-
-
od275187/2019_2020 : Supply, installation, testing and commissioning of the following MCCBs / MCBs / ISOLATORs / STARTERs of type-II coordination etc.in manufacturer's sheet steel enclosures, IP 20 Protection, fixed on the concealed wall including all interconnections and accessories of 63A TPN Isolator (MCCB type) with enclosure
10
-
-
od275207/2019_2020 : Supply, installation, testing and commissioning of the following MCCBs / MCBs / ISOLATORs / STARTERs of type-II coordination etc.in manufacturer's sheet steel enclosures, IP 20 Protection, fixed on the concealed wall including all interconnections and accessories of 40A TPN Isolator (MCB type) with enclosure.
10
-
-
od275208/2019_2020 : Supply, installation, testing and commissioning of the following MCCBs / MCBs / ISOLATORs / STARTERs of type-II coordination etc.in manufacturer's sheet steel enclosures, IP 20 Protection, fixed on the concealed wall including all interconnections and accessories of 20A DP MCB Isolator with Interlock socket arrangement with enclosure, if required.
10
-
-
od275211/2019_2020 : Supply, Installation, Testing and Commissioning of 20A 1 Ph. 3Pin Metal clad Plug and socket with 20A DP MCB as control with enclosure, if required
4
-
-
od275212/2019_2020 : Supply, Installation, Testing and Commissioning of 40A DP MCB along with moulded front plate in GI anodized
4
-
-
od275214/2019_2020 : Supply, Installation, Testing and Commissioning of 63A DP MCB along with moulded front plate in GI anodised
4
-
-
od279358/2019_2020 : WIRING - CIRCUIT CUM POINT WIRING The rates for all point wiring items shall also include supplying and fixing of the Conduits, conduit specials, bushes and other fittings,Approved GI saddles and grouting the same for exposed conduit work,2 mm thick Outlet boxes and junction box,All fixing accessories such as clips, brass screws etc,All work materials necessary for wiring a point circuit of any length from the Final Distribution Board to connector via switch and shall include the circuit wiring also except where identified.Primary Light / Fan Point Wiring: Supply, wiring, connecting commissioning of 3Runs 1.5 Sq.mm. (Ph, Neutral & Earth) PVC insulated multistranded FRLS copper wires in 1.8mm thick MS conduits fixed on ceiling partly and 1.8 mm thick PVC conduit concealed in the wall partly with necessary clamps, screws, etc., as required as per the site condition including supplying and fixing of modular 6A One way switch along with moulded front plate in GI anodised manufacturer's mounting box fixed flush with the wall complete with all accessories including 3 plate ceiling rose.NOTE: Above false ceiling when it is open wiring it should be of MS conduit and for Vertical and horizontal drops concealed PVC conduits can be used. Accordingly the length of the conduit can be calculated.
350
-
-
od279360/2019_2020 : WIRING - CIRCUIT CUM POINT WIRING.The rates for all point wiring items shall also include supplying and fixing of the Conduits, conduit specials, bushes and other fittings,Approved GI saddles and grouting the same for exposed conduit work,2 mm thick Outlet boxes and junction box,All fixing accessories such as clips, brass screws etc,All work materials necessary for wiring a point circuit of any length from the Final Distribution Board to connector via switch and shall include the circuit wiring also except where identified. Secondary Light Points: The secondary light points will have to be wired from the primary light point as mentioned above.
400
-
-
od279366/2019_2020 : Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core<br>cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box <br>and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc.;as required.
5
-
-
1.7.2 : Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required2X2.5 sq.mm+1X2.5 sq.mm earth wire
3500
-
-
od279375/2019_2020 : WIRING - CIRCUIT CUM POINT WIRING. The rates for all point wiring items shall also include supplying and fixing of the Conduits, conduit specials, bushes and other fittings,Approved GI saddles and grouting the same for exposed conduit work,2 mm thick Outlet boxes and junction box,All fixing accessories such as clips, brass screws etc,All work materials necessary for wiring a point circuit of any length from the Final Distribution Board to connector via switch and shall include the circuit wiring also except where identified.Ceiling Fan Points: Supply,installation,testing and commissioning of ceiling fan points same as Primary Light Point Wiring but for ceiling fan points including supplying and fixing concealed type fan hook box and supply and fixing of electronic type 300W fan step regulator with moulded front plate in GI anodised manufactures mounting box fixed flush with the wall complete with all accessories as required as per the site conditions.
10
-
-
od279377/2019_2020 : WIRING - CIRCUIT CUM POINT WIRING.The rates for all point wiring items shall also include supplying and fixing of the Conduits, conduit specials, bushes and other fittings,Approved GI saddles and grouting the same for exposed conduit work,2 mm thick Outlet boxes and junction box,All fixing accessories such as clips, brass screws etc,All work materials necessary for wiring a point circuit of any length from the Final Distribution Board to connector via switch and shall include the circuit wiring also except where identified.Ex Fan Points: Supply,installation,testing and commissioning of Ex-fan points same as Primary Light Point Wiring but for exhaust fan points including supplying and fixing one no 6A switch with indicator in switch board and one no 6A socket near Ex fan location in wall with moulded front plate in GI anodised manufacturer's mounting box fixed flush with the wall complete with all accessories as required as per the site conditions. in MS conduits
10
-
-
od279420/2019_2020 : WIRING - CIRCUIT CUM POINT WIRING. The rates for all point wiring items shall also include supplying and fixing of the Conduits, conduit specials, bushes and other fittings,Approved GI saddles and grouting the same for exposed conduit work,2 mm thick Outlet boxes and junction box,All fixing accessories such as clips, brass screws etc,All work & materials necessary for wiring a point circuit of any length from the Final Distribution Board to connector via switch and shall include the circuit wiring also except where identified.<br>Emergency Lighting Circuits: Supply and laying of 3 Runs 1.5 Sq.mm. (Ph, Neutral & Earth) PVC insulated multistranded FRLS copper wires in 1.8mm thick MS conduits fixed on ceiling partly and 1.8 mm thick PVC conduit concealed in the wall partly with necessary clamps, screws, etc., as required as per the site condition., from ELDB to Switch board,Emergency Light fittings.
650
-
-
od302974/2019_2020 : Supply Laying of 2R 2.5sqmm and 1R 1.5 Sq.mm. PVC insulated FRLS multistranded cu wires with laid in existing conduit or Raceways all accessories as reqd. (From DB to 6A Switch & Sockets)
4150
-
-
od302975/2019_2020 : Supply Laying of 2R 2.5sqmm and 1R 2.5 Sq.mm. PVC insulated FRLS multistranded cu wires in the 20mm dia 2mm thick PVC conduits with all accessories as reqd. (From DB to 6A Switch & Sockets)
600
-
-
od302976/2019_2020 : Supply & Laying of 2R 2.5sqmm and 1R 2.5 Sq.mm. PVC insulated FRLS multistranded cu wires in the 20mm dia 2mm thick MS conduits with all accessories as reqd. (From DB to 6A Switch & Sockets)
600
-
-
od302977/2019_2020 : Supply & Laying of 2R 4 sq.mm and 1R 2.5 Sq.mm. PVC insulated FRLS multistranded cu wires 20mm dia 2 mm thick PVC conduit with all accessories as reqd. (From DB to 6/16A Power Sockets / 20A Metal clad plug & sockets.).
500
-
-
od302978/2019_2020 : Supply, Laying of 2R 4 sq.mm and 1R 2.5 Sq.mm. PVC insulated FRLS multistranded cu wires 20mm dia 2 mm thick MS conduit with all accessories as reqd. (From DB to 6/16A Power Sockets / 20A Metal clad plug & sockets.).
1500
-
-
od279433/2019_2020 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.;1 x 4 sq. mm
50
-
-
od279436/2019_2020 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.1 x 1.5 sq. mm
50
-
-
od279463/2019_2020 : Supply, Installation, testing and commissioning of 1 no 6A Universal switched socket and with moulded front plate, GI anodised enclosure, and mounting box in the wall(concealed/open)and other associated accessories including chasing embedding rough plastering as required as per the site conditions for power points.
550
-
-
od279475/2019_2020 : Supply, Installation, testing and commissioning of 2nos 6A Universal switched socket ( UPS) and 2nos 6A switches and with moulded front plate, GI anodised enclosure, and mounting box in the wall(concealed/open)and other associated accessories including chasing embedding rough plastering as required as per the site conditions for power points.
520
-
-
od285717/2019_2020 : Supply, Installation, testing and commissioning of 1 no 6/16A universal switched socket and with moulded front plate GI anodised enclosure in the wall/floor(concealed/open and other associated accessories including chasing embedding rough plastering as required as per the site conditions for power points.
90
-
-
od285781/2019_2020 : Supply, Erection,Testing and commissioning of 32A 3Phase Metal clad plug and socket with 32 A TP MCB as control with enclosure,Plug top cover and connected accessories .
2
-
-
od285784/2019_2020 : CABLE TRAYS ;Supply and erection of following size 2mm thick Ladder type, Pregalvanized, cable trays and cable tray of rolled GI Sheet, supports out sections, pipes, plates, etc. including welding, anchor bolts, threaded down rods(for 300 mm trays only), supply of necessary anchor bolts and grouting etc. including breaking walls, floors, etc. for structures as required including supply of all GI hardware materials, all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-charge.The rate shall include supply & fixing of MS Grip bolts in columns/beams/walls/ceiling etc.as required,including drilling also. Rod supports shall be of galvanized full threaded rods of sizes 8,10 & 12mm dia for fixing to anchor fastener, anchor bolts.The length of the full threaded rods for the purposes of quoting shall be 1200 mm & includes nuts washers and supports shall be at a min.distance of 1Mtr.The rate will include all required bends, tees, vertical up downs, radius bends and other applicable accessories shall be factory fabricated, complete as required. 600 x 70mm x2mm Ladder type cable trays
12
-
-
od285960/2019_2020 : CABLE TRAYS Supply and erection of following size 2mm thick Ladder type, Pregalvanized, cable trays and cable tray of rolled GI Sheet, supports out sections, pipes, plates, etc. including welding, anchor bolts, threaded down rods(for 300 mm trays only), supply of necessary anchor bolts and grouting etc. including breaking walls, floors, etc. for structures as required including supply of all GI hardware materials, all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-charge.The rate shall include supply & fixing of MS Grip bolts in columns/beams/walls/ceiling etc.as required including drilling also. Rod supports shall be of galvanized full threaded rods of sizes 8,10 & 12mm dia for fixing to anchor fastener, anchor bolts.The length of the full threaded rods for the purposes of quoting shall be 1200 mm & includes nuts & washers and supports shall be at a min.distance of 1Mtr.The rate will include all required bends, tees, vertical up & downs, radius bends and other applicable accessories shall be factory fabricated, complete as required. 450 x 50 x 2mm Perffoereated type cable trays
255
-
-
od285962/2019_2020 : CABLE TRAYS Supply and erection of following size 2mm thick Ladder type, Pregalvanized, cable trays and cable tray of rolled GI Sheet, supports out sections, pipes, plates, etc. including welding, anchor bolts, threaded down rods(for 300 mm trays only), supply of necessary anchor bolts and grouting etc. including breaking walls, floors, etc. for structures as required including supply of all GI hardware materials, all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-charge.The rate shall include supply & fixing of MS Grip bolts in columns/beams/walls/ceiling etc.as required including drilling also. Rod supports shall be of galvanized full threaded rods of sizes 8,10 & 12mm dia for fixing to anchor fastener, anchor bolts.The length of the full threaded rods for the purposes of quoting shall be 1200 mm & includes nuts & washers and supports shall be at a min.distance of 1Mtr.The rate will include all required bends, tees, vertical up & downs, radius bends and other applicable accessories shall be factory fabricated, complete as required of 300 x 50mm x2mm Perffoereated type cable trays
360
-
-
od285968/2019_2020 : CABLE TRAYS Supply and erection of following size 2mm thick Ladder type, Pregalvanized, cable trays and cable tray of rolled GI Sheet, supports out sections, pipes, plates, etc. including welding, anchor bolts, threaded down rods(for 300 mm trays only), supply of necessary anchor bolts and grouting etc. including breaking walls, floors, etc. for structures as required including supply of all GI hardware materials, all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-charge.The rate shall include supply & fixing of MS Grip bolts in columns/beams/walls/ceiling etc.as required; including drilling also. Rod supports shall be of galvanized full threaded rods of sizes 8,10 & 12mm dia for fixing to anchor fastener, anchor bolts.The length of the full threaded rods for the purposes of quoting shall be 1200 mm includes nuts washers and supports shall be at a min.distance of 1Mtr.The rate will include all required bends, tees, vertical up downs, radius bends and other applicable accessories shall be factory fabricated, complete as required of 150 x 50mm x2mm Perffoereated type cable trays
210
-
-
od286207/2019_2020 : Supply and Installation of the 2KVA UPS 30 MIN 1ph in I ph out Backup and wiring the UPS supply and auxillary supplies of instruments, connected cables etc.
2
-
-
od286205/2019_2020 : Supply and laying of 25 X 3 mm Cu. Flat for LT Panel and equipment earthing incl vertical run in electrical shafts
350
-
-
od286211/2019_2020 : Supply and laying of 25 X 6 mm Cu. Flat for LT Panel and equipment earthing incl vertical run in electrical shafts.
100
-
-
od286217/2019_2020 : Providing and fixing 8 SWG copper wire on surface or in recess for loop earthing as required.
410
-
-
od286218/2019_2020 : Providing and fixing 10SWG copper wire on surface or in recess for loop earthing as;required.For gland earthing
150
-
-
od286222/2019_2020 : RACEWAYS :Supply, installation & fixing of the following size of Raceways made out of 2,3 mm thick galvanized sheet steel with Rate shall be inclusive of all Civil works for concealing, floor finish, Curing, etc.100x38X1.6mm GI Race ways floor trunking Including required under floor access outlet, under floor cross overs, under floor vertical access units, single compartment as specified incl joint sleeves
800
-
-
od286226/2019_2020 : RACEWAYS :Supply, installation & fixing of the following size of Raceways made out of 2,3 mm thick galvanized sheet steel with Rate shall be inclusive of all Civil works for concealing, floor finish, Curing, etc. <br>150x38X1.6mm GI Race ways floor trunking Including required under floor access outlet, under floor cross overs, under floor vertical access units, single compartment as specified incl joint sleeves
50
-
-
od286229/2019_2020 : RACEWAYS :Supply, installation & fixing of the following size of Raceways made out of 2,3 mm thick galvanized sheet steel with Rate shall be inclusive of all Civil works for concealing, floor finish, Curing, etc.225x38X1.6mm GI Race ways floor trunking Including required under floor access outlet, under floor cross overs, under floor vertical access units, single compartment as specified incl joint sleeves
50
-
-
od286230/2019_2020 : RACEWAYS :Supply, installation & fixing of the following size of Raceways made out of 2,3 mm thick galvanized sheet steel with Rate shall be inclusive of all Civil works for concealing, floor finish, Curing, etc.300x38X1.6mm GI Race ways floor trunking Including required under floor access outlet, under floor cross overs, under floor vertical access units, single compartment as specified incl joint sleeves
50
-
-
od288227/2019_2020 : JUNCTION BOX :Supply, installation & fixing of the 250X250X60-75mm junction box made out of 1 mm thick galvanized sheet steel junction boxes with Rate shall be inclusive of all Civil works for concealing, floor finish, Curing, etc.
50
-
-
od288230/2019_2020 : JUNCTION BOX :Supply, installation & fixing of the 110 mm X 50 mm size of junction boxes made out of 1 mm thick galvanized sheet steel junction boxes with Rate shall be inclusive of all Civil works for concealing, floor finish, Curing, etc.
180
-
-
od288234/2019_2020 : JUNCTION BOX :Supply, installation & fixing of the 160 mm X 50mm size of junction boxes made out of 1 mm thick galvanized sheet steel junction boxes with Rate shall be inclusive of all Civil works for concealing, floor finish, Curing, etc.
90
-
-
od288242/2019_2020 : JUNCTION BOX :Supply, installation & fixing of the 310 mm X 50 mm size of junction boxes made out of 1 mm thick galvanized sheet steel junction boxes with Rate shall be inclusive of all Civil works for concealing, floor finish, Curing, etc.
30
-
-
od288360/2019_2020 : Supply and laying of LT 2mm thick electrolytic grade rubber mat as per ISI IS 15652-2006 of size 2000x1000 mm in front of the LT panel boards.
6
-
-
od288365/2019_2020 : Supply and fixing of 440V Al Danger Boards of size 6;x 4both in Malayalam and English
2
-
-
1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
450
-
-
1.21.3 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm
300
-
-
od303346/2019_2020 : Supply, Erection, testing and commissioning of Cove/Strip light with 1 x 20W EACH 5M LED COOL white with driver and with all accessories and interconnecting with 3 core 1.5 sqmm PVC insulated multistrand wires and accessories as required.Crompton cat no LST20CDL/BL/WW
10
-
-
od303347/2019_2020 : Supply, Installation, including assembling, testing and commissioning of Wall mounted down light fitting with 9W or 10W LED lamps and sutable drivers for Mirror light fitting.
31
-
-
od303348/2019_2020 : Supply,Installation, Testing and Commissioning of single 4 feet 30 W LED Linear recessed type fittings with all accessories Copper ballast and 2.5 mtr hanging chain required as per the site conditions (Including the earthing of fixture) (as per the Wipro Cat No: LM35-381-XXX-57-G1 or equivalant type)
80
-
-
od303349/2019_2020 : Supply, Installation, Testing and Commissioning of single 4 Feet feet patty type fittings with all accessories like low loss ballast along with 2x20w Triphosphorous coat high lumen lamps and fixing the same in the wall / ceiling with wooden blocks, screws ,hardwaresas required as per the site conditions)
37
-
-
od303350/2019_2020 : Supply, Installation, Testing and Commissioning of 18W LED recess down light fitting with all accessories and interconnecting with 3 core 1.5 sqmm PVC insulated FRLS copper wire and fixing the same in the ceiling / partition as per site conditions.(model no:WIPRO LD90-231-XXX-65-XXOR EQL.
333
-
-
od303351/2019_2020 : Supply and installation, installation,testing,commissioning of of Decorative Unique natural led light with integrated electronic driver and diffuser finish and color Approval for Client and Architect CAT REF.NO : WIPRO LM-87-D320-BLGD OR EQL (CAFETERIA AND BREAKOUT SPACE AREA)
21
-
-
od303352/2019_2020 : Supply, Installation, Testing and Commingling of Supply of decorative suspended Pendent mounted COB down light 20w CCT: 4000k model no: CAT REF.NO : LD30-201-36W-40-PL OR EQL (corridoor area)
11
-
-
od309033/2019_2020 : Supply of decorative suspended LED luminaire with tuneable compatible of 2700k to 6500k wirelessly. Decorative ring on the walls for aesthetic, also the ring color should be inline with the CCT of the luminaire. System wattage shall not be greater than 40W and system lumen shall not be less than 3600lm. CAT REF.NO : WIPRO LM51-461-XXX-40-WH OR EQL& (Main Reception Area)
10
-
-
od309034/2019_2020 : Supply of suspended continous mounted LED luminaire with mirror optics and PC diffuser of wattage & 22W. The luminaire shall deliver lumen not less than 2200 lm with system efficacy of 100 lm/W. The luminaire dimension shall be 50x85x1150mm. Luminaire Consists of White powder coated finish pressure diecast aluminium housing Special translucent satin finish colourLED PMMA diffuser for only downward distribution. LED make: that satisfies IEC62471 Photobiological/RoHS Standards with and LED Efficacy of 150lm/W, Colour Temperature-57000K or Higher with LED binning as per ANSI Bin C78.377A, 120Deg LED Beam Angle, CRI 80, Life of LED as per L70 50000burning hours, Ambient temp-0 to 50DegC, Driver efficiency;85%, THD 10%, Power factor ;0.95, Inbuilt Surge protection in CM 3.0KV, LED Driver with Voltage range 150-270V AC and Safety Extra Low Voltage Safe level 60V DC as per IEC standard, Electrical Safety with Class 1 Insulation. CAT REF.NO : WIPRO LM34-251-XXX-57WG1& OR EQL.
8
-
-
od303353/2019_2020 : Supply, Installation, Testing and Commisioining of High performance, Recess mounted 36W 2X2 LED light fitting. The supply of accessories like clamps, supporting brackets and hardwares as required and interconnecting with 3 core 1.5 sqmm PVC insulated FRLS copper wire with all accessories required as per site conditions.(as per the wipro Cat No: CRCO-10R0 38 HP57 or equivalant type)
286
-
-
od303388/2019_2020 : Supply, Installation, testing and commissioning of 1200mm sweep Ceiling fan and fixing the same with extended rod from roof, required clamps,bolts,fan hook , screws ,hardwares as required as per the site condition -BEE 5 Star rated
10
-
-
od316911/2019_2020 : Supply and installation of Power supply cables for various instruments, data converters, data logger, control room equipment etc connected to Energy management system. And supervision of - installation of the RS 485 network, in all BMS related work instruments and control cabling, including integrating Energy meters to existing Energy Management System PME®cost including System up gradation and software installation.
1
-
-
od306464/2019_2020 : Supply, Fabrication, Erection of structural steel including 2 coats of red oxide primer & 2 coats of approved enamel paint .Items including all channels and angles, suspension supports, steel plate, anchor bolts, cross angles, brackets, etc. including grouting, welding, tools, tackles as required etc. The payment shall be made for the actual quantities measured. This item shall be operated for tray supports in cable trenches, cable trays, Mounting frames for panels and DBs., vertical tray supports et,panel,
50
-
-
NETWORKING
-
-
-
od288562/2019_2020 : Supply ,installation,testing, commissioning of cat6 UTP jack with strain relief and bend limiting boot ( Yellow for data and blue for voice)
1915
-
-
od288571/2019_2020 : Supply installation of 2 port british style phase plate cost including PVC/ GI back box
500
-
-
od288574/2019_2020 : supply , installation of Cat 6A U/FTP Multi-stranded Patch cord 1 Meter -
960
-
-
1.53.1 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable
30000
-
-
od288580/2019_2020 : Supply and Fixing of Cat 6A 24Port Unloaded Jack Panel with Rear Cable support manager for data and voice
55
-
-
od288581/2019_2020 : Supply and fixing 19" 15U closed Rack with Mounting Accessories with all connected accessories including Power distribution unit with 6 Sockets
5
-
-
od308116/2019_2020 : Supply installation , testing, commissioning of 19" 12 U closed Rack with Mounting Accessories with all connected accessories, including Power distribution unit with 6 Sockets
4
-
-
od308230/2019_2020 : Supply and fixing 19" 9 U closed Rack with Mounting Accessories with all connected accessories including Power distribution unit with 6 Sockets
1
-
-
od316647/2019_2020 : Supply, installation, testing, commissioning of High speed low loss shielded Data communication cable to form the backbone data communication network cable in a 20mm dia Heavy duty PVC Pipe running in the existing Built in trench / Cable tray/inside the panel etc. with necessary fixing accessories as required as per the site condition.
400
-
-
od316648/2019_2020 : Supply, installation testing commissioning of Ethernet gateway EGX300 to connect the field instrumentation to the PC running PME® system
2
-
-
od316649/2019_2020 : Supply, installation, testing, commissioning of 12 port LIU loaded with pigtail and other accessories
10
-
-
od316650/2019_2020 : Supply installation testing commissioning of 24 port LIU loaded with pigtail and other accessories
4
-
-
od289828/2019_2020 : PVC TRUNKING/RACEWAYS :Providing and fixing of PVC Trunking in DB locations for Cable entry.
100
-
-
od289733/2019_2020 : Supply and installation of 4C x 2.5 sqm PVC insulated armoured power cables for power supply to field devices/ controller etc
100
-
-
od289735/2019_2020 : Supply and installation of 4 C x 4 sqm PVC insulated armoured power cables for power supply to field devices/ controller etc
50
-
-
od289739/2019_2020 : Supply and Installation of AHU 5.5 KW Starter panel for Nineth Floor unit with 1No.32A TP&N MCCB with adjustable variable setting 16KA with all connected accessories, 1no. outgoing feeder & 1 no. starter for AHU and 1no. starter for AHU with 1 no. spare feeder provision (DOL starter up to 5.5Kw and star delta starter above 5.5 Kw) to be mounted in each of the AHU room. Each AHU shall have 4 nos. potential free contacts for IBMS interconnectivity and single phase supply for pressure independent valve & ahu lighting (230V/24V with Transformer for PIBCV valve & for fire damper actuator with time delay relay) VFD with auto & Manual operations.
5
-
-
od289743/2019_2020 : Supply and Installation of AHU 3.3 KW Starter panel for Nineth Floor unit with1No.32A TP&N MCCB with adjustable variable setting 16KA with all connected accessories, 1no. outgoing feeder & 1 no. starter for AHU and 1no. starter for AHU with 1 no. spare feeder provision (DOL starter up to 3.3Kw and star delta starter above 5.5 Kw) to be mounted in each of the AHU room. Each AHU shall have 4 nos. potential free contacts for IBMS interconnectivity and single phase supply for pressure independent valve ahu lighting (230V/24V with Transformer for PIBCV valve & for fire damper actuator with time delay relay) VFD with auto Manual operations.
5
-
-
od289748/2019_2020 : Supply installation testing commissioning of DDC controller mounted on panel IP 54(indoor) /IP 65 ( outdoor) with required transformer, relay, terminals, indication lamps, ...etc. DDC controller shall support Ethernet protocol or BACnet, LON MS/TP Protocol/LON-IP and controller sizing designed as per the IO Summary.Controller power supply shall be isolated from the activator ( Valve/ Damper) power supplies, all control components power will be fed from DDC panel .Floor AHU
10
-
-
od289750/2019_2020 : Supply installation testing commissioning of Duct mounted air temperature sensors including all the mounting accessories. The sensor shall be Pt1000 RTD type for temperature measurement with 4-20mA transmitters. The temperature measurement range shall be 10deg C to 50deg C
10
-
-
od289756/2019_2020 : Supply, installation testing commissioning of Duct type Static Pressure Sensor(0 Pa to 1000 Pa). For AHUs.
15
-
-
od289835/2019_2020 : Supply &Laying of ISI Certified 20mm size, 2mm thick, PVC FRLS Conduit with bends, collar, saddles, saddle base and other accessories for Signal Cable
400
-
-
od289845/2019_2020 : Supply & Laying of ISI Certified 25 mm size, 2mm thick, PVC FRLS Conduit with bends, collar, saddles, saddle base and other accessories for Signal Cable
400
-
-
od289850/2019_2020 : Supply installation of 12 core OFC fiber sm 9/125 micron
600
-
-
od289852/2019_2020 : Supply installation testing commissioning of 2 Core 1.0 sq.mm ISI stamped ATSC, PVC insulated, Unarmored, Tinned Copper, twisted, shielded, PE insulated, Signal Cable / DDC Communication Cable with proper ferrules, lugs and other necessary accessories. The spec shall meet the system manufacturer spec.
250
-
-
od289854/2019_2020 : Supply installation testing commissioning of 3 Core 1.0 sq.mm ISI stamped ATSC, PVC insulated, Unarmored, Tinned Copper, twisted, shielded, PE insulated, Signal Cable / DDC Communication Cable with proper ferrules, lugs and other necessary accessories. The spec shall meet the system manufacturer spec
600
-
-
od289867/2019_2020 : Supply, installation testing commissioning of HD FRLS Flexible Conduite with necessary accessories
100
-
-
od289879/2019_2020 : Supply installation testing commissioning of PVC race way with cover and all required accessories: 100 X 50 mm
100
-
-
od289883/2019_2020 : Supplying, laying, termination, testing and commissioning of Signal Cables (2 core 1.0 Sq.mm), Armoured Cable, tinned copper conductor cable-screened
250
-
-
od289886/2019_2020 : Supply, installation, testing and commissioning of 3C x 1.5 Sq mm copper flexible armoured cable, for actuator power, requirements of controllers, 2 way valves etc
250
-
-
od289889/2019_2020 : Supplying, laying, termination, testing and commissioning of Signal Cables (4 core 1.0 Sq.mm), Armoured Cable, tinned copper conductor cable-screened
250
-
-
od308295/2019_2020 : Supplying, , laying, termination, testing and commissioning of Network Cable, CAT6a, PVC insulated tinned copper conductor Armoured cable
500
-
-
FIRE
-
-
-
od298578/2019_2020 : Providing and installing of Fire Evacuation Plan with route in rectangular Acrylic sheet with ss bolt of size 600 x 450mm & 2 to 3mm thick
2
-
-
od298579/2019_2020 : Providing and installing Fire and emergency signage Boards( Fire exit directions, Fire Extinguisher, Fire duct, safe material handling procedures, Fire assembly area indications etc,) The signages should be battery backup with self illumination
75
-
-
od298580/2019_2020 : Providing and installing in position the following type of sign boards made out of 3mm thick & ;Opaque PVC foam board with computer cut, PVC non-reflective self adhesive vinyle painted foam board, complete with mirror fasteners.ACTION BY SECURITY/RECEPTION UPON RECEIPT OF INFORMATION THROUGH FIRE ALARM OR FIRE DETECTORS OR BY USING PUBLIC ADDRESS SYSTEM. ALERT THE OCCUPANTS BY USING PUBLIC ADDRESS SYSTEM.INFORM FIRE CONTROL THROUGH ANY ONE OF THE FOLLOWING PHONE NUMBERS:IN CASE OF THE CASUALTIES, CALL AMBULANCE BY DIALLING NUMBER…….........FIRE FIGHTING AGNECY -------------------------------&lPHONE : -----------------------&lFAX : ----------------------------
5
-
-
od298581/2019_2020 : Providing and fixing in position the signages FIRE ORDER it should contain the following matter on 3mm thick Opaque; PVC foam board of computerised cut, PVC non-reflective self adhesive vinyle painted foam board of 3 x 4 ALERT THE SECURITY AT SECURITY ROOM BY ACTUATING MANUAL CALL POINT LOCATED AT STRATEGIC LOCATION.EVACUATE THE OCCUPANTS BY USING THE FIRE EXITS & EMERGENCY EXITS ONLY. ASSEMBLE AT VARIOUS ASSEMBLY POINTS.IF POSSIBLE TRY TO EXTINGUISH THE FIRE BY USING THE NEAREST/SUITABLE PORTABLE EXTINGUISHER OR WATER FROM NEAREST WET RISER,BE CALM, DO NOT GIVE ANY ROOM FOR PANIC, WALK, DO NOT RUN,IF YOU ENCOUNTER SERIOUS DIFFICULTY IN EVACUATION, STAY IN YOUR PLAN AND TRY TO ATTRACT ATTENTION OF RESCUE TEAM
5
-
-
od298582/2019_2020 : Supply & Installation of portable fire extinguisers manufctured as per IS with ISI marked suitable for wall mounting / floor mounting / trolley types with all accessories signages. Mechanical Foam extinguisher capacity: 9ltr
10
-
-
od298583/2019_2020 : Supply & Installation of portable fire extinguisers manufctured as per IS with ISI marked suitable for wall mounting / floor mounting / trolley types with all accessories & signages. DRY CHEMICAL POWDER (DCP) type Capacity : 6Kgs.
36
-
-
od298584/2019_2020 : Supply,Installation of portable fire extinguisers manufctured as per IS with ISI marked suitable for wall mounting / floor mounting / trolley types with all accessories & signages. CO2 type - Capacity : 4.5Kgs.
35
-
-
od298585/2019_2020 : Supply & Installation of portable fire extinguishers manufactured as per IS with ISI marked suitable for wall mounting / floor mounting / trolley types with all accessories & signages.ABC Multipurpose - Capacity : 6Kgs.
40
-
-
od298586/2019_2020 : Supply & fixing of approved type rosette plates ( Recessed type, in two piece) for Sprinklers below false ceiling area. The Rosette shall be fabricated by M.S. plate of 2mm thick and the finish shall be powder coated and color shall be as approved by architects / clients.
270
-
-
od299040/2019_2020 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm
525
-
-
od299041/2019_2020 : Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of Speaker cable Single pair, 2-core, 1.5 sqmm (yellow colour) cores and size including connections and interconnections etc. as required.
7615
-
-
od299042/2019_2020 : Supplying, installing, testing & commissioning of 10W/100V Wall Mount Speaker
8
-
-
od299043/2019_2020 : Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.
165
-
-
od299044/2019_2020 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
210
-
-
od299045/2019_2020 : Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.
970
-
-
od299046/2019_2020 : Supplying & laying of 2x1.5 sqmm fire alarm RED armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. (cable should be of ATC specification)
998
-
-
od299047/2019_2020 : Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.
15
-
-
od299048/2019_2020 : Supplying, installation, testing & commissioning of addressable manual call point complete as required ( pull stations of approved make with NO/NC Contacts slim type and projecting out from the surface enclosuring with glass)
15
-
-
od299049/2019_2020 : Supplying, installation, testing & commissioning of fault isolator complete with base as required.
10
-
-
od299050/2019_2020 : Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.
147
-
-
od299051/2019_2020 : Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. (Below True Ceiling)
172
-
-
AIR CONDITIONING
-
-
-
od290015/2019_2020 : Supply, Installation, Testing and Commissioning of factory built floor mounted chilled water double skin horizontal / Vertical air handling units made of 25 mm thick panels consisiting of pre plasticized G.I. casing of thickness 0.8 mm outside layer and0.8 mm inside layer with polyurethane foam(PUF) insulation factory injected between them by injection moulding machine, complete with blower section with blower sutiable for static pressure as required, minimum 2 bend GSS/ PVC elimators, cooling coil section with aluminum finned copper tubes( tubes thickness not less than 0.5mm) cooling coil of 6 row deep, filter section with 50 mm thick metal viscous/ washable synthetic type air prefillters, belt drive package with TEFC drive motor suitable for 415 +/- 10 % volts, 50 Hz, 3 phase AC supply, drain connectons, stainless steel (18G) drain pan with PUF insulation, etc. complete as per specfication and of following capacites. Limit Switch, Emergency Light, Guard for Inspection Door,Commissioning filters set, etc.Double skin AHU Units of 6 row cooling coil of 9220 CFM/20.0 TR/ 6R/ 50mm SP
1
-
-
od290019/2019_2020 : Supply, Installation, Testing and Commissioning of factory built floor mounted chilled water double skin horizontal / Vertical air handling units made of 25 mm thick panels consisiting of pre plasticized G.I. casing of thickness 0.8 mm outside layer and0.8 mm inside layer with polyurethane foam(PUF) insulation factory injected between them by injection moulding machine, complete with blower section with blower sutiable for static pressure as required, minimum 2 bend GSS/ PVC elimators, cooling coil section with aluminum finned copper tubes( tubes thickness not less than 0.5mm) cooling coil of 6 row deep, filter section with 50 mm thick metal viscous/ washable synthetic type air prefillters, belt drive package with TEFC drive motor suitable for 415 +/- 10 % volts, 50 Hz, 3 phase AC supply, drain connectons, stainless steel (18G) drain pan with PUF insulation, etc. complete as per specfication and of following capacites. Limit Switch, Emergency Light, Guard for Inspection Door,Commissioning filters set, etc;Double skin AHU Units of 6 row cooling coil of 8000 CFM/18.0TR/6R/50 mm SP
1
-
-
od290020/2019_2020 : Supply, Installation, Testing and Commissioning of factory built floor mounted chilled water double skin horizontal / Vertical air handling units made of 25 mm thick panels consisiting of pre plasticized G.I. casing of thickness 0.8 mm outside layer and0.8 mm inside layer with polyurethane foam(PUF) insulation factory injected between them by injection moulding machine, complete with blower section with blower sutiable for static pressure as required, minimum 2 bend GSS/ PVC elimators, cooling coil section with aluminum finned copper tubes( tubes thickness not less than 0.5mm) cooling coil of 6 row deep, filter section with 50 mm thick metal viscous/ washable synthetic type air prefillters, belt drive package with TEFC drive motor suitable for 415 +/- 10 % volts, 50 Hz, 3 phase AC supply, drain connectons, stainless steel (18G) drain pan with PUF insulation, etc. complete as per specfication and of following capacites. Limit Switch, Emergency Light, Guard for Inspection Door,Commissioning filters set, etc.;Double skin AHU Units of 6 row cooling coil of 6000CFM/13.5 TR/6R/50 mm SP
1
-
-
od290023/2019_2020 : Supply, Installation, Testing and Commissioning of factory built floor mounted chilled water double skin horizontal / Vertical air handling units made of 25 mm thick panels consisiting of pre plasticized G.I. casing of thickness 0.8 mm outside layer and0.8 mm inside layer with polyurethane foam(PUF) insulation factory injected between them by injection moulding machine, complete with blower section with blower sutiable for static pressure as required, minimum 2 bend GSS/ PVC elimators, cooling coil section with aluminum finned copper tubes( tubes thickness not less than 0.5mm) cooling coil of 6 row deep, filter section with 50 mm thick metal viscous/ washable synthetic type air prefillters, belt drive package with TEFC drive motor suitable for 415 +/- 10 % volts, 50 Hz, 3 phase AC supply, drain connectons, stainless steel (18G) drain pan with PUF insulation, etc. complete as per specfication and of following capacites. Limit Switch, Emergency Light, Guard for Inspection Door,Commissioning filters set, etc.Double Skin AHU Units of 6 row cooling coil of 4000CFM/20.0 TR/6R/50 mm SP
1
-
-
od290026/2019_2020 : Supply, Installation, Testing and Commissioning of factory built floor mounted chilled water double skin horizontal / Vertical air handling units made of 25 mm thick panels consisiting of pre plasticized G.I. casing of thickness 0.8 mm outside layer and0.8 mm inside layer with polyurethane foam(PUF) insulation factory injected between them by injection moulding machine, complete with blower section with blower sutiable for static pressure as required, minimum 2 bend GSS/ PVC elimators, cooling coil section with aluminum finned copper tubes( tubes thickness not less than 0.5mm) cooling coil of 6 row deep, filter section with 50 mm thick metal viscous/ washable synthetic type air prefillters, belt drive package with TEFC drive motor suitable for 415 +/- 10 % volts, 50 Hz, 3 phase AC supply, drain connectons, stainless steel (18G) drain pan with PUF insulation, etc. complete as per specfication and of following capacites. Limit Switch, Emergency Light, Guard for Inspection Door,Commissioning filters set,Double skin AHU Units of 6 row cooling of 3000CFM/18TR/6R/50 mm SP
1
-
-
od290033/2019_2020 : Supply , installation, testing, commissioning of Chilled water ceiling suspended Fan coil unit of double skin construction with compact cooling coil, multispeed fan motor, the blower shall be dynamicaly balanced and designed for silent operation, the filters shall be washable synthetic media type arranged for convenient cleaning and replacement, drain pan with pump .The units as specified in Schedule of Quantities shall be factory fitted with valve package comprising of 2 way pressure independent valve suitable for variable CHW flow with modulating actuator, ball with Y strainer valve at inlet Ball valve at outlet and necessary piping connections. The actuator of modulating valve shall be provided with interface cards to receive 0-10V or 4-20 mA signal from Minxon Digital Thermostat.The unit is supplied with corded remote controller of approved as per specifications.3464 cfm / 9.0TR / 4R / 50 mm SP
1
-
-
od290034/2019_2020 : Supply , installation, testing, commissioning of Chilled water ceiling suspended Fan coil unit of double skin construction with compact cooling coil, multispeed fan motor, the blower shall be dynamicaly balanced and designed for silent operation, the filters shall be washable synthetic media type arranged for convenient cleaning and replacement, drain pan with pump .The units as specified in Schedule of Quantities shall be factory fitted with valve package comprising of 2 way pressure independent valve suitable for variable CHW flow with modulating actuator, ball with Y strainer valve at inlet & Ball valve at outlet and necessary piping connections. The actuator of modulating valve shall be provided with interface cards to receive 0-10V or 4-20 mA signal from Minxon Digital Thermostat.The unit is supplied with corded remote controller of approved as per specifications.2482 cfm / 5.5TR / 4R / 50 mm SP
3
-
-
od290035/2019_2020 : Supply , installation, testing, commissioning of Chilled water ceiling suspended Fan coil unit of double skin construction with compact cooling coil, multispeed fan motor, the blower shall be dynamicaly balanced and designed for silent operation, the filters shall be washable synthetic media type arranged for convenient cleaning and replacement, drain pan with pump .The units as specified in Schedule of Quantities shall be factory fitted with valve package comprising of 2 way pressure independent valve suitable for variable CHW flow with modulating actuator, ball with Y strainer valve at inlet & Ball valve at outlet and necessary piping connections. The actuator of modulating valve shall be provided with interface cards to receive 0-10V or 4-20 mA signal from Minxon Digital Thermostat.The unit is supplied with corded remote controller of approved as per specifications.2160 cfm / 5.5TR / 4R / 50 mm SP
1
-
-
od290036/2019_2020 : Supply , installation, testing, commissioning of Chilled water ceiling suspended Fan coil unit of double skin construction with compact cooling coil, multispeed fan motor, the blower shall be dynamicaly balanced and designed for silent operation, the filters shall be washable synthetic media type arranged for convenient cleaning and replacement, drain pan with pump .The units as specified in Schedule of Quantities shall be factory fitted with valve package comprising of 2 way pressure independent valve suitable for variable CHW flow with modulating actuator, ball with Y strainer valve at inlet & Ball valve at outlet and necessary piping connections. The actuator of modulating valve shall be provided with interface cards to receive 0-10V or 4-20 mA signal from Minxon Digital Thermostat.The unit is supplied with corded remote controller of approved as per specifications;2017 cfm / 5.0TR / 4R / 50 mm SP
1
-
-
od290074/2019_2020 : Supply , installation, testing, commissioning of Chilled water ceiling suspended Fan coil unit of double skin construction with compact cooling coil, multispeed fan motor, the blower shall be dynamicaly balanced and designed for silent operation, the filters shall be washable synthetic media type arranged for convenient cleaning and replacement, drain pan with pump .The units as specified in Schedule of Quantities shall be factory fitted with valve package comprising of 2 way pressure independent valve suitable for variable CHW flow with modulating actuator, ball with Y strainer valve at inlet & Ball valve at outlet and necessary piping connections. The actuator of modulating valve shall be provided with interface cards to receive 0-10V or 4-20 mA signal from Minxon Digital Thermostat.The unit is supplied with corded remote controller of approved as per specifications1791 cfm / 4.5TR / 4R / 50 mm SP
1
-
-
od290078/2019_2020 : Supply , installation, testing, commissioning of Chilled water ceiling suspended Fan coil unit of double skin construction with compact cooling coil, multispeed fan motor, the blower shall be dynamicaly balanced and designed for silent operation, the filters shall be washable synthetic media type arranged for convenient cleaning and replacement, drain pan with pump .The units as specified in Schedule of Quantities shall be factory fitted with valve package comprising of 2 way pressure independent valve suitable for variable CHW flow with modulating actuator, ball with Y strainer valve at inlet & Ball valve at outlet and necessary piping connections. The actuator of modulating valve shall be provided with interface cards to receive 0-10V or 4-20 mA signal from Minxon Digital Thermostat.The unit is supplied with corded remote controller of approved as per specifications 1561 cfm / 4.0TR / 4R / 50 mm SP
1
-
-
od290081/2019_2020 : Supply , installation, testing, commissioning of Chilled water ceiling suspended Fan coil unit of double skin construction with compact cooling coil, multispeed fan motor, the blower shall be dynamicaly balanced and designed for silent operation, the filters shall be washable synthetic media type arranged for convenient cleaning and replacement, drain pan with pump .The units as specified in Schedule of Quantities shall be factory fitted with valve package comprising of 2 way pressure independent valve suitable for variable CHW flow with modulating actuator, ball with Y strainer valve at inlet Ball valve at outlet and necessary piping connections. The actuator of modulating valve shall be provided with interface cards to receive 0-10V or 4-20 mA signal from Minxon Digital Thermostat.The unit is supplied with corded remote controller of approved as per specifications.600 cfm / 1.5TR / 6R / 50 mm SP
10
-
-
od290083/2019_2020 : Supplying, laying , fixing, testing and commissioning of following noinal sizes of chilled water pipings insides the building( with necessary clamps, vibration isolators and fittings but ecluding valves, strainers, guages etc), duly insulated with EPS insulation and finally applying 0.63 mm aluminium sheet cladding etc. as per specification and as required complete in all respect. Note: The pipes sizes 150 mm & below shall be M.S ;C; Class as per IS: 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Steel for pipes upto 350mm dia. and from minimum 7 mm thick MS sheet for pipes of 400 mm dia and above. Chilled water piping of nominal size - 65mm dia. with insulation
67
-
-
od290089/2019_2020 : Supplying, laying , fixing, testing and commissioning of following noinal sizes of chilled water pipings insides the building( with necessary clamps, vibration isolators and fittings but ecluding valves, strainers, guages etc), duly insulated with EPS insulation and finally applying 0.63 mm aluminium sheet cladding etc. as per specification and as required complete in all respect. Note: The pipes sizes 150 mm & below shall be M.S ;C Class as per IS: 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Steel for pipes upto 350mm dia. and from minimum 7 mm thick MS sheet for pipes of 400 mm dia and above.Chilled water piping of nominal size - 50mm dia with insulation
73
-
-
od290617/2019_2020 : Supplying, laying , fixing, testing and commissioning of following noinal sizes of chilled water pipings insides the building( with necessary clamps, vibration isolators and fittings but ecluding valves, strainers, guages etc), duly insulated with EPS insulation and finally applying 0.63 mm aluminium sheet cladding etc. as per specification and as required complete in all respect. Note: The pipes sizes 150 mm & below shall be M.S "C" Class as per IS: 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Steel for pipes upto 350mm dia. and from minimum 7 mm thick MS sheet for pipes of 400 mm dia and above.<br>Chilled water piping of nominal size - 40mm dia with insulation
36
-
-
od290618/2019_2020 : Supplying, laying /fixing, testing and commissioning of following nominal size of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with 80 kg/cum density resin bonded fiber glass pipe section insulation covered with a layer of 120gm/sqm polythene sheet (vapour barrier) and finally applying 0.63 mm aluminium sheet cladding complete with type 3, grade 1 roofing feltstrip (as per IS: 1322 as amended up to date) at joints and repairing of damage to building etc. as per specifications and as required.r|n<br>Note: The Pipes of sizes 150 mm & below shall be M.S. 'C' class as per IS: 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS : 3589,from minimum 6.35 mm thick M.S.Sheet for pipes upto 350 mm dia. and from minimum 7 mm thick MS sheet for pipes of 400 mm dia and above.<br>Chilled water piping of nominal size - 32mm dia. (50mm thick fiber glass insulation)
55
-
-
od290619/2019_2020 : Supplying, laying /fixing, testing and commissioning of following nominal size of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with 80 kg/cum density resin bonded fiber glass pipe section insulation covered with a layer of 120gm/sqm polythene sheet (vapour barrier) and finally applying 0.63 mm aluminium sheet cladding complete with type 3, grade 1 roofing feltstrip (as per IS: 1322 as amended up to date) at joints and repairing of damage to building etc. as per specifications and as required.r|n<br>Note: The Pipes of sizes 150 mm & below shall be M.S.C class as per IS: 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS : 3589,from minimum 6.35 mm thick M.S.Sheet for pipes upto 350 mm dia. and from minimum 7 mm thick MS sheet for pipes of 400 mm dia and above.Chilled water piping of nominal size - 25mm dia. (50mm thick fiber glass insulation)
47
-
-
od290620/2019_2020 : Supply, Instalaltion, balancing and commissioning of factory fabricated 200 mm dia GSS sheet metal round ducting complete with neoprene rubber gasket, elbows, splitter, dampers, vanes, hangers, supports etc. as per approved drawings and specification of following sheet thickness complete as required. etc.
124
-
-
od290621/2019_2020 : Supply ,installation testing and commissioning of 65 mm dia 2 way modulating valve with modulating actuator. The actuator shall be capable of receiving signal of 0-10 V from BMS ( feedback). Valve shall of Bronze construction and of PN 16 rating with flanged ends. Valve Sizes to be matched with scheme drawings and actuator.
2
-
-
od290737/2019_2020 : Supply ,installation testing and commissioning of 50 mm dia 2 way modulating valve with modulating actuator. The actuator shall be capable of receiving signal of 0-10 V from BMS ( feedback). Valve shall of Bronze construction and of PN 16 rating with flanged ends. Valve Sizes to be matched with scheme drawings and actuator.
4
-
-
od290739/2019_2020 : Supply ,installation testing and commissioning of 32 mm dia 2 way modulating valve with modulating actuator. The actuator shall be capable of receiving signal of 0-10 V from BMS ( feedback). Valve shall of Bronze construction and of PN 16 rating with flanged ends. Valve Sizes to be matched with scheme drawings and actuator.
1
-
-
od290742/2019_2020 : Supply ,installation testing and commissioning of 40 mm dia 2 way modulating valve with modulating actuator. The actuator shall be capable of receiving signal of 0-10 V from BMS ( feedback). Valve shall of Bronze construction and of PN 16 rating with flanged ends. Valve Sizes to be matched with scheme drawings and actuator.
5
-
-
16.7.4.6 : Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.Y- Strainer of Ductile CI Body flanged ends with stainless steel strainer for chilled/hot water circulation including insulation as specifiedY- Strainer of 65 mm dia
2
-
-
16.7.4.7 : Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.Y- Strainer of Ductile CI Body flanged ends with stainless steel strainer for chilled/hot water circulation including insulation as specifiedY- Strainer of Ductile of 50 mm dia
4
-
-
16.7.4.8 : Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.Y- Strainer of Ductile CI Body flanged ends with stainless steel strainer for chilled/hot water circulation including insulation as specifiedY- Strainer of 40 mm dia
5
-
-
16.7.1.6 : Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.Butterfly valve (Manual) with C I body SS Disc, Nitrile Rubber Seal & O-Ring PN 16 pressure rating for chilled water/ hot water circulation as specified .Butterfly valve (Manual) 65 mm
4
-
-
16.7.1.7 : Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.Butterfly valve (Manual) with C I body SS Disc, Nitrile Rubber Seal & O-Ring PN 16 pressure rating for chilled water/ hot water circulation as specified .BUTTERFLY VALVE (MANUAL) 50mm
8
-
-
16.7.1.8 : Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.Butterfly valve (Manual) with C I body SS Disc, Nitrile Rubber Seal & O-Ring PN 16 pressure rating for chilled water/ hot water circulation as specified .Butterfly valve (Manual) 40 mm
10
-
-
16.7.2.6 : Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.Balancing valve with built in measuring facility with C.I Body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled /hot water circulation as specified.Balancing valve with built in measuring facility 65 mm dia
2
-
-
16.7.2.7 : Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.Balancing valve with built in measuring facility with C.I Body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled /hot water circulation as specified.Balancing valve with built in measuring facility 50 mm dia
4
-
-
16.7.2.8 : Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.Balancing valve with built in measuring facility with C.I Body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled /hot water circulation as specified.Balancing valve with built in measuring facility of 40 mm dia
5
-
-
od291557/2019_2020 : Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.<br>Balancing valve with built in measuring facility with C.I Body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled /hot water circulation as specified.<br>Balancing valve with built in measuring facility of 40 mm dia
5
-
-
od291573/2019_2020 : Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required.
22
-
-
od291687/2019_2020 : Providing & fixing in position the mercury in glass industrial type temperature thermometers.
22
-
-
od291692/2019_2020 : Supply installation testing commissioning of Automatic Air Vent, brass body, upto 12 bar pressure, removable lid, 1/2" threaded to BS21
22
-
-
od291720/2019_2020 : Suply and installation of Condensate drain line with PVC 6 kgs piping insulated with 19mm nitrile The price shall include required P trap at the outlet of AHU and with 50 mm dia.
32
-
-
od291722/2019_2020 : Suply and installation of Condensate drain line with PVC 6 kgs piping insulated with 19mm nitrile The price shall include required P trap at the outlet of AHU and with 32 mm dia.
42
-
-
od291727/2019_2020 : Suply and installation of Condensate drain line with PVC 6 kgs piping insulated with 19mm nitrile The price shall include required P trap at the outlet of AHU and with 40 mm dia.
29
-
-
od291751/2019_2020 : Suply and installation of Condensate drain line with PVC 6 kgs piping insulated with 19mm nitrile The price shall include required P trap at the outlet of AHU and with 25 mm dia
28
-
-
od293026/2019_2020 : VALVE PACKAGE FOR FCU : Supply, installation, testing and commissioning of 25 mm Dia valve Package for FCU. 2way Modulating valve, actuator, thermostat and ball valve with strainer, copper, brass fittings complete as required.
10
-
-
od293028/2019_2020 : Supply, installation, balancing and commissioning of 22 G factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Factory fabricated GSS sheet metal rectangular ducting as per IS 655-2006
183
-
-
od296211/2019_2020 : Supply, installation, balancing and commissioning of 24G factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Factory fabricated GSS sheet metal rectangular ducting as per IS 655-2006
450
-
-
od293029/2019_2020 : Supply, installation, balancing and commissioning of 26 G factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.<br>Factory fabricated GSS sheet metal rectangular ducting as per IS 655-2006
186
-
-
od293030/2019_2020 : Supply and Installation of fire rated flexible canvass for duct connection with AHU
21
-
-
od293032/2019_2020 :Supply and installation of 9 mm Thick (Accoustic) Duct liner (Insulation) of specified thickness of Elastromeric Rubber Insulation manufactured as per ASTM E 84 test & which should also meet NFPA 90A supplementary materials for air distribution system which should not absorbs less 0.2% water by volume (ASTM c 209), should not support microbial growth (ASTM C1071, G21, G22) and should emit objectionable odors (ASTM C 665) and should have thermal conductivity of 0.27 ( R - 2.78 in 3.4" thickness) and water vapor permanence of 0.10. - Class1 Material-.All joints of the Insulation material should be further covered with 50 mm wide 3 mm thick self adhesive tape made of similar material Black Cotton Tape shall not be used.
150
-
-
od293033/2019_2020 :Supply and installation 9mm Thick Thermal (Insulation) of specified thickness of Elastromeric Rubber Insulation manafactured as per ASTM E 84 test & which should also meet NFPA 90A supplementary materials for air distribution system which should not absorbs less 0.2% water by volume (ASTM c 209), should not support microbial growth (ASTM C1071, G21, G22) and should emit objectionable odors (ASTM C 665) and should have thermal conductivity of 0.27 ( R - 2.78 in 3.4" thickness) and water vapor permeance of 0.10. Joints should be sealed with 50 mm wide 3 mm thick self adhesive tape (Black Cotton Tape not acceptable). Class O Material-
600
-
-
od316475/2019_2020 : Supply, Insulation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.GI volume control duct damper
28
-
-
od316506/2019_2020 : Supplying, Fixing, testing and commissioning of fire dampers in supply air duct/ main branch and return air path as and where required of required sizes i/c control wiring, the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications.Fire damper
16
-
-
od316476/2019_2020 : Supplying, Fixing, testing and commissioning of fire dampers in supply air duct/ main branch and return air path as and where required of required sizes i/c control wiring, the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications.Actuator
16
-
-
od316206/2019_2020 : Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminum without volume control dampers with anti smudge ring and removable core.
39
-
-
od316207/2019_2020 : Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminum with aluminum volume control dampers with anti smudge ring and removable core.
39
-
-
od316478/2019_2020 : Supply, installation,testing commissioning of Underdeck Insulation ,Roof insulation with 19mm thick nitrile rubber with a Aluminium foil facing having 30 Kg/M3 densitywith proper screw and washer support in between for every one sqmtr
3096
-
-
od316479/2019_2020 : Supplying, fixing acoustic lining on wall and celling of AHU rooms with 50 mm thick, density 32 kg/cu.m resin bonded glass fiber insulation friction fixed in 610 mm x 610 mm frame work made of 25x50x50x50x25xmm made out of 0.6 mm thick GI sheet U shaped channel and covered with reinforced fiber glass tissues and finished with0.80 mm perforated aluminum sheet etc. complete as required and as per specifications. 50 mm thick resin bonded glass wool having density of 32 kg/cum
60
-
-
16.15 : Suppluying and Fixing of powder costed extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.
15
-
-
od316473/2019_2020 : Supplying and Fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.
15
-
-
od296298/2019_2020 : Supply and Installation testing commissioning of of PVC disc valve of 150mm diameter
79
-
-
16.19.1 : Supplying, installation, testing & commissioning of thermal insulated flexible duct of following sizes duly supported at regulator interval as per site requirement etc. complete as required as per specifications.Thermal insulated flexible duct (200 mm dia)
206
-
-
od293477/2019_2020 : Supply installation testing commissioning of Spigot dampers for the supply air of 200 mm dia.
103
-
-
od293482/2019_2020 : supply installation testing commissioning of Ultrasonic BTU-meter with integral calculator / LCD display unit, suitable for mounting in any orientation in Supply or Return pipes and without the need for any flow-straightening lengths of pipes; pulse output for energy or volume; with 2M long connected cable, with galvanic isolation; logbook as standard; long life batteries (15 years); 24V AC/DC power supply; 2 slots for communication modules; optical interface; shall allow data from preceding 60 months to be read; automatic self-diagEachtics and fault detection capability.Meters shall be certified by European Measuring Instruments Directive (MID) 2004/CE/22.suitable for connectivity to third party BMS with BacNet / Modbus protocol.PN 25 rating, screwed ends to BS21 for sizes ≤ 50 mm dia; flanged ends for sizes > 50 mm dia; rates shall be inclusive of providing counterflanges, bolts, nuts & gaskets and insulation of same specifications as that of CHW piping.shall be provided only for office areas for the purpose of metering & billing the tenants on a periodic basis; not required for common areas such as corridors, lift lobbies etc.suitable for measurement of water flows thru following equipment; selections / sizing shall be as per water flows, pressure drops and line sizes furnished under respective equipment schedules. of 65 mm dia
2
-
-
od293493/2019_2020 : Supply, Installation, Testing & Commissioning Ultrasonic BTU-meter with integral calculator / LCD display unit, suitable for mounting in any orientation in Supply or Return pipes and without the need for any flow-straightening lengths of pipes; pulse output for energy or volume; with 2M long connected cable, with galvanic isolation; logbook as standard; long life batteries (15 years); 24V AC/DC power supply; 2 slots for communication modules; optical interface; shall allow data from preceding 60 months to be read; automatic self-diagEachtics and fault detection capability.Meters shall be certified by European Measuring Instruments Directive (MID) 2004/CE/22.suitable for connectivity to third party BMS with BacNet / Modbus protocol.PN 25 rating, screwed ends to BS21 for sizes ≤ 50 mm dia; flanged ends for sizes > 50 mm dia; rates shall be inclusive of providing counterflanges, bolts, nuts & gaskets and insulation of same specifications as that of CHW piping.shall be provided only for office areas for the purpose of metering & billing the tenants on a periodic basis; not required for common areas such as corridors, lift lobbies etc.suitable for measurement of water flows thru following equipment; selections / sizing shall be as per water flows, pressure drops and line sizes furnished under respective equipment schedules. of 50 mm dia
4
-
-
od296267/2019_2020 : Supply installation testing commissioning of Ultrasonic BTU-meter with integral calculator / LCD display unit, suitable for mounting in any orientation in Supply or Return pipes and without the need for any flow-straightening lengths of pipes; pulse output for energy or volume; with 2M long connected cable, with galvanic isolation; logbook as standard; long life batteries (15 years); 24V AC/DC power supply; 2 slots for communication modules; optical interface; shall allow data from preceding 60 months to be read; automatic self-diagEachtics and fault detection capability.Meters shall be certified by European Measuring Instruments Directive (MID) 2004/CE/22.suitable for connectivity to third party BMS with BacNet / Modbus protocol.PN 25 rating, screwed ends to BS21 for sizes ≤ 50 mm dia; flanged ends for sizes > 50 mm dia; rates shall be inclusive of providing counterflanges, bolts, nuts & gaskets and insulation of same specifications as that of CHW piping.shall be provided only for office areas for the purpose of metering & billing the tenants on a periodic basis; not required for common areas such as corridors, lift lobbies etc.suitable for measurement of water flows thru following equipment; selections / sizing shall be as per water flows, pressure drops and line sizes furnished under respective equipment schedules. of 25 mm dia
10
-
-
od293551/2019_2020 : Supply installation, testing , commissioning of Ultrasonic BTU-meter with integral calculator / LCD display unit, suitable for mounting in any orientation in Supply or Return pipes and without the need for any flow-straightening lengths of pipes; pulse output for energy or volume; with 2M long connected cable, with galvanic isolation; logbook as standard; long life batteries (15 years); 24V AC/DC power supply; 2 slots for communication modules; optical interface; shall allow data from preceding 60 months to be read; automatic self-diagEachtics and fault detection capability.Meters shall be certified by European Measuring Instruments Directive (MID) 2004/CE/22.suitable for connectivity to third party BMS with BacNet / Modbus protocol.PN 25 rating, screwed ends to BS21 for sizes ≤ 50 mm dia; flanged ends for sizes > 50 mm dia; rates shall be inclusive of providing counterflanges, bolts, nuts & gaskets and insulation of same specifications as that of CHW piping.shall be provided only for office areas for the purpose of metering & billing the tenants on a periodic basis; not required for common areas such as corridors, lift lobbies etc.suitable for measurement of water flows thru following equipment; selections / sizing shall be as per water flows, pressure drops and line sizes furnished under respective equipment schedules. of 32 mm dia
5
-
-
od316504/2019_2020 : Supply, Installation, Testing & Commissioning of factory made 2.0 TR Hi wall mounted minimum 3 star rating R410A gas Type Air conditioner units complete with centrifugal blower cooling coil etc., enclosed the insulation along with matching air cooled condenser with Rotary compressor all in with microprocessor control & Remote Control, Stabilizer including gas charging, Supports for outdoor units, Safety controls, etc. Including Stand for Out Door.Units should be compatible for BMS integration.including Minor civil works required if any and necessary copper piping required
2
-
-
od293696/2019_2020 : Supply installation, testing , commissioning of 1200 CFM/3TR chilled water cassette unit with 4 Way Chilled Water Cassette type Fan Coil unit with Fan, Motor with three speed control, Coil ,additional insulated drip tray as per the specifications mentioned in technical data sheet. It Should have a cordless remote control and drain pump to remove condensate drain. Necessary valve station campraises of 4 Nos Ball Valve, 3 way motorised valve with Actuators and auto balancing valve, Y-Stainer with SS drain pan with insulation.
2
-
-
od293698/2019_2020 : Supply, installation,of centrifugal inline exhaust fan with static pressure 15 mm for 300 CFM cafeteria exhaust
3
-
-
od318356/2019_2020 : Supply ,Installation & Commissioning of Centrifugal Inline Exhaust fan with Static Pressure - 15 mm for following fan capacity. - Closed cabins Fresh air fan with prefilter - 3000 CFM
1
-
-
od293700/2019_2020 : Expansion, up gradation, integration and supervision and commissioning of installation of the RS 485 netwok, and all BMS related work, BTU integration, Fire panel integration and cost inclusive of necessary test fluke test, light/ smoke test in HVAC duct, LT panel test etc
1
-
-
Audio Video Conferencing system
-
-
-
od318374/2019_2020 : Supply installation testing commissioning of Multimedia LED Projector with following features:Display Technology- 1-Chip DMD, Resolution- 800 x 600 (total 480,000 pixels) Brightness- 2400lm, Contrast Ratio- 2000:1, Picture Size- 40” – 300”, Throw Ratio- 1.9 – 2.1, Est. Lamp Life Rating-160W (4000hr * 2) with low mode,185W (3000hr * 2) with Standard Mode, PC Compatibility- 640 X 480 – 1600 X 1200,True: 800 x 600, Sync on Green available, Video Compatibility- NTSC / NTSC 4.43 / PAL (including PAL – M-N) SECAM / PAL-60 Component Video: 480i/p (625i/p), 720p (720p) (1125i/p 60 Hz), 1080i/p (1125i/p 50 Hz), Input Terminals- RGB: mini D-Sub 15pin x 2, Video: RCA X 1 + S-Video x 1, Audio: Stereo mini jack (dia 3.5mm) x 1, Output terminals- RGB: mini D-sub 15 pin x 1, Audio: Stereo mini jack (dia 3.5mm) X 1, Communication Terminal- RS- 232C: D-sub 15pin X 1, Speaker Output -2W mono, Power - Suitable with AC 100-240V, 50/60Hz, Accessories Required- ceiling mount, Soft carrying bag, Remote control (with 2 batteries), Power cable VGA (d-sub) cable, user-Manual (CD-ROM), Safety manual, lens cap, projector stand
1
-
-
od318375/2019_2020 : Supply installation testing commissioning of Motorised Projection screen with Hi-Gain Fabric of Size 8 X 6 Feet
1
-
-
od318691/2019_2020 : Installation and programming of entire system and Cable Management System with HDMI-1, VGA-1, Audio-1,USB-1 cost including modular switches and sockets (HDMI,VGA , CAT6 switched sockets)
1
-
-
od318692/2019_2020 : Supplying, , installation, testing and commissioning of AV Cables - Includes HDMI, VGA, Audio Speaker cables.
1
-
-
od318693/2019_2020 : Supplying, , installation, testing and commissioning of VIA GO gives iOS, Android, Chromebook, PC, and Mac users instant wireless connectivity with advanced presentation technology. VIA GO features content streaming for crystal clear mirrored images and stunning video playback. The solution includes iOS & Android mirroring. With industry−leading 1024−bit encryption and built−in Wi−Fi, VIA GO can be used securely on the internal network.
1
-
-
od318694/2019_2020 : Supplying, , installation, testing and commissioning of Wirless Router
1
-
-
od318695/2019_2020 : Supplying, , installation, testing and commissioning of 7–Inch Wall Table Mount PoE Touch Panel.
1
-
-
od318696/2019_2020 : Supplying, , installation, testing and commissioning of Compact 16–Port Master / Room Controller with PoE Supported by Kramer Control Scalable & flexible control Bidirectional RS–232 & IR with learning capability GPI/O & relay control Power over Ethernet Size — MegaTOOLS® — Mount 2 units side–by–side in a 1U rack space with the optional RK–T2B rack adapter.
1
-
-
od318697/2019_2020 : Supplying, , installation, testing and commissioning of Compact 5−Input 4K60 4:4:4 Presentation Switcher/Scaler with HDBaseT & HDMI Simultaneous Outputs
1
-
-
od318698/2019_2020 : Supplying, , installation, testing and commissioning of Zafa - CMS02 Manual Cable Management System with 2x Power, HDMI, VGA, LAN & Audio
4
-
-
od318699/2019_2020 : Supplying, , installation, testing and commissioning of Additional Microphone for Group Series
2
-
-
od318700/2019_2020 : Supplying, , installation, testing and commissioning of Group Series Microsoft Interop License. Enables Skype for Business, Lync 2013, and AV MCU interop on qualified RP Group series software. Valid for all RP Group Series products.
1
-
-
od318701/2019_2020 : Supplying, , installation, testing and commissioning of Polycom Group Series 1080p HD License-1080 encode/decode for people and content.
1
-
-
od318702/2019_2020 : Supplying, , installation, testing and commissioning of Group Series & Centro Multipoint License. HSN Code : 85176290 - 18% 6-way on Group 500 & Centro. 8-way on Group 700. Either supports 4-way HD continuous presence.
1
-
-
od318703/2019_2020 : Supplying, , installation, testing and commissioning of Polycom Partner Premier for One Year (HSN Code: 998716 - 18%)
1
-
-
od318704/2019_2020 : Supplying, , installation, testing and commissioning of Polycom RealPresence Group 500-720p, Group 500 HD codec, EagleEyeIV-12x camera, mic, array, univ. remote, NTSC/PAL. Cables: 2 HDMI 1.8m, 1 CAT 5E LAN 3.6m, 1 HDCI digital 3m, Power: India BIS. Maintenance Contract Required.
1
-
-
od318705/2019_2020 : Supplying, , installation, testing and commissioning of White 6.5 − Inch, 2−Way Open−Back Ceiling Speakers
6
-
-
od318706/2019_2020 : Supplying, , installation, testing and commissioning of Power Amplifier (1x120W @70V/100V & 2x60W @8Ω) 1 x 120W @ 70V/100V, 2 x 60W @ 4/8Ω ,Line level output , 2 Inputs with individual gain ,Selectable high pass filter Controllable via RS–232 and IP ,Auto standby.
1
-
-
od318707/2019_2020 : Supplying, , installation, testing and commissioning of Tilt Wall Mount Bracket for Display
1
-
-
od318708/2019_2020 : Supply installation testing commissioning of Samsung QB75R UHD Smart Signage LED Inputs: HDMI X 2, DVI-D, Audio USB / Quad Core Processor, Wifi, Inbuilt Memory, Magic Info
1
-
-
od318720/2019_2020 : Supply, installation testing commissioning of Tiltable Wall Bracket.
2
-
-
Modular Furniture
-
-
-
od2558/2020_2021 : Supply and installation of Work Stations (Open Office System) 1200mm X 600mm X 750mm ht Sharing type with table top made of 25mm thick Prelaminated particle board with 2mm PVC edge banding supported on under structure made of ERW tubular structure of size 50x50mm 1.6 mm thick powder coated with suitable levellers at either ends and connectors with 50X25 sections provided in between the leg for support; mast leg/ central leg with vertical cable raiser and power beam for integrated wire management, provision for fixing sockets, soft closing access flip boxes fitted on table top, privacy screens of height 400 mm: Fabric screens along main spine with pin-up band on top encased in aluminium extrusion along main and along return, glass screens with 8 mm thick laminated toughened glass with bevelled edges and round corners of approved colour (fabric of approved quality, fire retardant & colour) supported on brackets; modesty panel (aisle & passage side) : Below power beam/raceway/wire tray MS powder coated Perforated Modesty of 300 ht is considered , At aisle side 350 ht MS Powder coated perforated modesty considered. PRE.LAM PEDESTAL: One Mobile Prelam pedestal with lockable castors made of Prelam particle board finish. One drawers Pedestal 400mm (w) X 450mm (d) X 600 mm (h) contain two equal drawers and one larger drawer for box files and fixtures including brushed 100mm long SS handle, soft closing hinges, locks with keys. The slides are ball bearing to ensure smooth movement. All hardware of app. make etc. complete as per directions of Engineer-in-charge (Warranty period: 5 years)
328
-
-
od2559/2020_2021 : Supply and installation of Work Stations (Open Office System) 1200mm X 600mm X 750mm ht Non sharing type with table top made of 25mm thick Prelaminated particle board with 2mm PVC edge banding supported on under structure made of ERW tubular structure of size 50x50mm 1.6 mm thick powder coated with suitable levellers at either ends and connectors with 50X25 sections provided in between the leg for support; mast leg/ central leg with vertical cable raiser and power beam for integrated wire management, provision for fixing sockets, soft closing access flip boxes fitted on table top, privacy screens of height 400 mm: Fabric screens along main spine with pin-up band on top encased in aluminium extrusion along main and along return, glass screens with 8 mm thick laminated toughened glass with bevelled edges and round corners of approved colour (fabric of approved quality, fire retardant & colour) supported on brackets; modesty panel (aisle & passage side) : below table top MS powder coated perforated modesty of 450 ht is considered , At aisle side 350 ht MS Powder coated perforated modesty considered. PRE.LAM PEDESTAL: One Mobile Prelam pedestal with lockable castors made of Prelam particle board finish. One drawers Pedestal 400mm (w) X 450mm (d) X 600 mm (h) contain two equal drawers and one larger drawer for box files and fixtures including brushed 100mm long SS handle, soft closing hinges, locks with keys. The slides are ball bearing to ensure smooth movement. All hardware of app. make etc. complete as per directions of Engineer-in-charge (Warranty period: 5 years)
101
-
-
od2560/2020_2021 : Supply and installation of L shaped collaborative Work Station units 1500mm X 600mm X 750mm ht with table top made of 25mm thick Prelaminated particle board with 2mm PVC edge banding supported on under structure made of ERW tubular structure of size 50x50mm 1.6 mm thick powder coated with suitable levellers at either ends and connectors with 50X25 sections provided in between the leg for support; mast leg/ central leg with vertical cable raiser and power beam for integrated wire management, provision for fixing sockets, soft closing access flip boxes fitted on table top, privacy screens of height 400 mm: Fabric screens along main spine with pin-up band on top encased in aluminium extrusion along main and along return, glass screens with 8 mm thick laminated toughened glass with bevelled edges and round corners of approved colour (fabric of approved quality, fire retardant & colour) supported on brackets; modesty panel (aisle & passage side) : below table top MS powder coated perforated modesty of 450 ht is considered , At aisle side 350 ht MS Powder coated perforated modesty considered, etc. complete as per directions of Engineer-in-charge (Warranty period: 5 years)
4
-
-
od2567/2020_2021 : Supplying and placing in position premium quality Executive tables of approved make (Main table of size 2100x900x750 mm, return table with storage unit of size 1200x450x750mm; pedestal of size 400x470x545mm) and following specification: Table top made of 25 mm thick prelaminated particle board edges post formed/ 2mm PVC edge banding; table supported on 50x50 mm square pipe made of 1.6mm thick CRCA powder coated legs and beams 50x25 mm made of 1.2mm CRCA powder coated, tie member made of 1.6 mm powder coated CRCA, levellers made of 100% recyclable nylon bolt, wire managers or fliptop on table top, metal/ prelam board modesty for 450 mm height, mobile pedestal storage unit with three drawers, return desk storage unit with one adjustable rack and prelaminated particle board side hung shutter, along with all accessories such as handles, locks, soft closing hinges, sliders etc. complete as per directions of Engineer-in-charge (Warranty period: 5 years)
5
-
-
od2568/2020_2021 : Supplying and placing in position executive tables of approved make (Main table of size 1500x750x750 mm, return table with storage unit of size 1200x450x750mm; pedestal of size 400x470x545mm) and following specification: Table top made of 25 mm thick prelaminated particle board edges post formed/ 2mm PVC edge banding; table supported on 50x50 mm square pipe made of 1.6mm thick CRCA powder coated legs and beams 50x25 mm made of 1.2mm CRCA powder coated, tie member made of 1.6 mm powder coated CRCA, levellers made of 100% recyclable nylon bolt, wire managers or fliptop on table top, metal/ prelam board modesty for 450 mm height, mobile pedestal storage unit with three drawers, return desk storage unit with one adjustable rack and prelaminated particle board side hung shutter, along with all accessories such as handles, locks, soft closing hinges, sliders etc. complete as per directions of Engineer-in-charge (Warranty period: 5 years)
15
-
-
od2569/2020_2021 : Supplying and assembling of premium quality Conference Room table 14 seater capacity U shaped configuration made up of 25mm thick pre-laminated particle board table top postformed/edge banded, with leg and beam supports using powdercoated ERW tubular understructure and with metal modesty. Table shall have provision of raceways, power beam for wire management, table top to have 7 nos of 400 mm flip top box with soft closing damper and metal powder coated base with double decker having provision to mount power and data module The legs to have levellers with adujstability of 15mm. The cable tray along the centre spine with C channel having provision to mount power and data module. Seperate uptake below the cable tray connecting floor to double decker. Under structure to have metal perforated modesty, etc. complete as per directions of Engineer-in-charge (Warranty period: 5 years)
1
-
-
od2574/2020_2021 : Supplying and assembling of Meeting Room table of 2400x1200x750 mm size made up of 25mm thick pre-laminated particle board table top postformed/edge banded, with leg and beam supports matching to workstations using powdercoated ERW tubular understructure 50x50x1.6mm size. Table shall have provision of raceways, power beam for wire management, table top to have 2 nos of 400mm flip top box with soft closing damper and metal powder coated base with double decker having provision to mount power and data module, etc. complete as per directions of Engineer-in-charge (Warranty period: 5 years)
6
-
-
od2571/2020_2021 : Supply and installation of Discussion table with of 25mm thick pre-laminated particle board table top of 1200mm dia with SS round legs of 100mm dia 2mm wall thickness with disc plate of 450mm dia at the top having required holes for fixing and bottom support of 600mm dia plate, table top to have 300mm flip top box with soft closing damper and metal powder coated base with double decker having provision to mount power and data module. The uptake is through the pole, etc. complete as per directions of Engineer-in-charge (Warranty period: 5 years)
4
-
-
od2590/2020_2021 : Supply and installation of Cafeteria table of size 900 Dia *750H with table top is made of 25mm E1 Grade pre-laminated particle board with PVC edge banding with understructure stainless steel pipe with X-base/disc base as per directions of Engineer-in-charge (Warranty period: 5 years
20
-
-
od2572/2020_2021 : Supply and installation of Centre table of size 500 mm dia x 650 mm ht (or nearby size or dimension) in Breakout zone fabricated with under structure assembly of powder coated tube and disc base of approved colour and with 25mm thk. prelaminated particle board with edge banding etc complete of approved colour (Warranty - 5 years)
2
-
-
od2575/2020_2021 : Supply and installation of Centre table of size 1050x600x380mm (or nearby size or dimension) fabricated with under structure assembly of powder coated steel tube of 25mm x 25mm cross section of approved colour and with 25mm thk. BWR ply Top finished on all sides with 1mm laminate of approved colour (Warranty - 5 years)
4
-
-
od2539/2020_2021 : Supply and installation of premium high back chairs for Conference room with mesh back , fabric upholstered seat, good ergonomic design and height adjustable lumbar support, aluminium polished five pronged Base, Twin Wheel Nylon Castors, adjustable Armrest; adjustable head rest, Gas lift mechanism, Synchro Tilt Mechanism, depth adjustable Seat with PU Moulded Cushion upholstered with fire retardant Fabric of approved colour as per directions of Engineer-in-charge (Warranty period: 5 years )
14
-
-
od2540/2020_2021 : Supply and installation of premium high back chairs for CEO cabins with mesh back , fabric upholstered seat, good ergonomic design and height adjustable lumbar support, aluminium polished five pronged Base, Twin Wheel Nylon Castors, adjustable Armrest; adjustable head rest, Gas lift mechanism, Synchro Tilt Mechanism, depth adjustable Seat with PU Moulded Cushion upholstered with fire retardant Fabric of approved colour as per directions of Engineer-in-charge (Warranty period: 5 years )
5
-
-
od2566/2020_2021 : Supply and installation of high back chairs for Cabins, Meeting rooms, Discussion rooms with mesh back , fabric upholstered seat, good ergonomic design and height adjustable lumbar support, aluminium polished five pronged Base, Twin Wheel Nylon Castors, adjustable Armrest; adjustable head rest, Gas lift mechanism, Synchro Tilt Mechanism, depth adjustable Seat with PU Moulded Cushion upholstered with fire retardant Fabric of approved colour as per directions of Engineer-in-charge (Warranty period: 5 years )
79
-
-
od2541/2020_2021 : Supply and installation of Medium back Task chair for Workstation, Reception, Visitor's chair in Cabins etc. with mesh back , fabric upholstered seat, good ergonomic design and height adjustable lumbar support, aluminium polished five pronged Base, Twin Wheel Nylon Castors, adjustable Armrest; adjustable head rest, Gas lift mechanism, Synchro Tilt Mechanism, depth adjustable Seat with PU Moulded Cushion upholstered with fire retardant Fabric of approved colour as per directions of Engineer-in-charge (Warranty period: 5 years )
486
-
-
od2576/2020_2021 : Supply and installation of Pantry Chairs stackable type with Polypropylene seat and back and four point stainless steel legs as per directions of Engineer-in-charge (Warranty period: 5 years
80
-
-
od2579/2020_2021 : Supply and installation of height adjustable chair for pantry counter with seat and back made from plywood, soft foam cushion covered in leatherette upholstery, chrome metal base height adjustable with swivel mechanism etc. complete. Warranty – 5 years
4
-
-
od2580/2020_2021 : Supply and installation of three seater Sofa manufactured with leg of Rubber Wood and frame made of hardwood upholstered with Leatherette semi PU 1mm thick with backing, Seat Cushion with 6 inch premium density foam of 28 Kg/m3, back Cushion with hollow siliconized conjugated fiber Polyester infill of 15 density etc. complete. Warranty – 5 years
1
-
-
od2581/2020_2021 : Supply and installation of two seater Sofa manufactured with leg of Rubber Wood and frame made of hardwood upholstered with Leatherette semi PU 1mm thick with backing, Seat Cushion with 6 inch premium density foam of 28 Kg/m3, back Cushion with hollow siliconized conjugated fiber Polyester infill of 15 density etc. complete. Warranty – 5 years
13
-
-
od2582/2020_2021 : Supply and installation of single seater Sofa manufactured with leg of Rubber Wood and frame made of hardwood upholstered with Leatherette semi PU 1mm thick with backing, Seat Cushion with 6 inch premium density foam of 28 Kg/m3, back Cushion with hollow siliconized conjugated fiber Polyester infill of 15 density etc. complete. Warranty – 5 years
6
-
-
od2583/2020_2021 : Supply and installation of single seater Iconic or Designer lounge chairs manufactured with leg of Rubber Wood and frame made of hardwood upholstered with Leatherette semi PU 1mm thick with backing, Seat and back Cushion with premium density foam of 28 Kg/m3 etc. complete. Warranty – 5 years
4
-
-
od2584/2020_2021 : Supply and installation of single seater Breakout zone chairs manufactured with solid walnut wood legs and upholstered and padded bent plywood seat, back etc. complete. Warranty – 5 years
8
-
-
od2585/2020_2021 : Supplying and fixing freestanding modular storage units of approved make and of size 1200x450x750 mm made of 18 mm thick both sides prelaminated particle board for verticals, horizontals and intermediate shelves. The openable door shutters shall be provided with SS handles, locks, auto closing hinges and necessary hardware's etc; complete. The exposed edges shall be finished with 2mm thick PVC lipping etc as per directions of Engineer-in-charge (Warranty period: 5 years)
14
-
-
od2586/2020_2021 : Supplying and fixing freestanding modular storage units of approved make and of size 1200x450x1200 mm made of 18 mm thick both sides prelaminated particle board for verticals, horizontals and intermediate shelves. The openable door shutters shall be provided with SS handles, locks, auto closing hinges and necessary hardware's etc; complete. The exposed edges shall be finished with 2mm thick PVC lipping etc as per directions of Engineer-in-charge (Warranty period: 5 years)
4
-
-
od2587/2020_2021 : Supplying and fixing freestanding modular storage units of approved make and of size 900x450x1200 mm made of 18 mm thick both sides prelaminated particle board for verticals, horizontals and intermediate shelves. The openable door shutters shall be provided with SS handles, locks, auto closing hinges and necessary hardware's etc; complete. The exposed edges shall be finished with 2mm thick PVC lipping etc as per directions of Engineer-in-charge (Warranty period: 5 years)
4
-
-
Miscellaneous
-
-
-
od2599/2020_2021 :Providing and fixing of Conference Room signage with metal frames and SS nameplates with open frame slider design to display the availability of any event. Signage to be SS make with brush metal finish with acid etched signs of approved shade and of size 400 x 100 mm. The S.S signage shall be pasted using double-sided tape of 3M make on the Flush doors etc. complete as per directions of Engineer-in-charge.
1
-
-
od2600/2020_2021 : Providing and fixing of Room Nomenclature Signages in SS plate with brushed metal finish with acid etched lettering of approved shade and of size 400 x 100 mm. The S.S signage shall be pasted using double-sided tape of 3M make on the Glass doors/ Flush doors.
25
-
-
od2601/2020_2021 :Providing and fixing of Room Nomenclature Signages SS make with brush metal finish with acid etched signs of approved shade and of size 125 x 125 mm for Toilets. The S.S signage shall be pasted using double-sided tape of 3M make on the Flush doors etc. complete as per directions of Engineer-in-charge.
8
-
-
Carpentry items
-
-
-
od2618/2020_2021 : Supply and installation of Reception Table of size Length 1500 mm width 600mm and 750 (ht) to shape and comprising table top out of 25 mm thk BWR ply board with stiffner of 19mm thk BWR ply finished with 1 mm thick Laminate of approved colour and shade. With 2mm edge lipping finish.Foot rest cum CPU stand of required length with same 19 mm thk BWR ply finished of approved colour and shade. Keyboard tray made out of 12mm thick BWR ply finished with 1 mm thick Laminate of approved colour and shade with necessary Telescopic slides and 50mm Dia SS Brush Finish wire manager of approved make and quality. Storage unit with 12mm thk BWR ply, 450mm wide drawer unit of size (w) 450 x ( d) 600 and 120 mm ( ht ) and below openable shutter supported with 19 mm thk BWR ply at front ,sides and bottom of 75mm high with necessary TW lipping, telescopic drawer slides,Individual locking arrangement, 100mm long brush finish S.S. handles, etc., complete. All exposed surface finished with 1.5 mm thick laminate and inner surface finished with 1.0 mm thick laminate of approved colour and shade. All exposed faces of Steam beech beading polished to the satisfaction of the Architects. The inner side of the Drawer with BWR ply of approved colour and shade and storage painted with enamel of approved shade, neatly and complete
8
-
-
od2619/2020_2021 : Providing and Fixing of Storage unit below wash basin counters as per Drawings. In general, the storage unit shall be made of 19mm thick PVC panel of approved make on all sides, and shall include 1 adjustable 19mm PVC panel shelf inside. All exposed surfaces shall be finished with 1mm laminate of approved shade, and all inner / recessed PVC panel surfaces shall be left exposed. Rate to include all hardware, magnetic catch, heavy duty hinges, S.S handles - of approved make, etc. complete. Rate to include all hardware, MS brackets for support from the masonry wall, etc complete. Rate to include cutting of counter-top for accommodating the Washbasin bowl and CP fittings, Basic rate of Granite : Rs.234/- per sft. Note: Only the Front Elevation area shall be considered for Measurement.
53.39
-
-
od2620/2020_2021 : Providing& Fixing Overhead storage as per Drg., in general, the storage shall be of 450mm depth and 600 mm height. The cabinets & shutters shall be FACTORY-FINISHED and made of 19mm BWR ply finished with 1mm laminate of approved shade. The storage unit shall include 1 no. of adjustable intermediate shelf as per the drawing made of 19mm BWR ply placed on necessary S.S stud supports, and finished with 1mm laminate of app. shade on both sides. Rate to include all hardware, tower bolt, magnetic catch, heavy duty hinges, S.S handles - of approved make, including locking arrangements with master key of approved make etc. complete. Note: Only the Front Elevation area shall be considered for Measurement.
5.4
-
-
od2621/2020_2021 : Providing and fixing Storage unit 600 mm depth and 750 mm height as per drawing, made out of 19 mm thick BWR plywood on all sides. The countertop shall be finished with 18mm thick granite. The storage unit shall include 1 no. of adjustable intermediate shelf made of 19mm BWR plywood placed on necessary S.S stud supports. The openable shutter shall be FACTORY-FINISHED and made out of 19mm BWR plywood with necessary PVC edge banding of matching colour, supports, etc complete and finished with 1mm laminate of approved shade. Rate shall include for providing Granite Beading of size 40 x 15mm at top level etc. complete as per drawing. All inner / recessed surfaces shall be painted with sealer finish. Rate to include all hardware, S.S tower bolt, magnetic catch, heavy duty hinges, S.S handles - of approved make, including locking arrangements with master key of approved make etc. complete.Note: Only the Front Elevation area shall be considered for Measurement.Basic rate of Granite : Rs.234/- per sft.
22.5
-
-
od2622/2020_2021 : Providing Fixing Cafeteria / Pantry counter with storage , the storage shall be of 600mm depth and 850 mm height. The cabinets & shutters shall be FACTORY-FINISHED and made of 19mm PVC panel finished with 1mm laminate of approved shade. The storage unit shall include 1 no. of adjustable intermediate shelves as per the drawing made of 19mm PVC panel placed on necessary S.S stud supports. Rate to include all hardware, tower bolt, magnetic catch, heavy duty hinges, S.S handles - of approved make, including locking arrangements with master key of approved make etc. complete. Note: Only the Front Elevation area shall be considered for Measurement. Rate to include for Providing & fixing 19mm thick Granite counter-top of approved shade over 19mm thick PVC panel. Rate to include for 40x15mm end granite beading along the outer perimeter of the counter-top. The beading shall have R-5 corner edges along the top and bottom edges as per the drawing. Rate to include all hardware, etc complete. Rate to include cutting of counter-top for accomodating the S.S sink and CP fittings and fixing the end beading to the cut-perimeter to neat finish. Basic rate of Granite : Rs.234/- per sft.
17
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements