Kerala State IT Infrastructure Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 5,00,000Document Cost
₹ 17,700Tender Fee
Refer Documents
Summary
Composite Interior Fit Out Works In Fourth Floor Of Indeevaram Building At Infopark Koratty Sez Campus, Thrissur.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_KSITI_615502_1Bid Award Id
ViewTender No
KSITIL/IP/2023-24/12Tender Authority
Kerala State IT Infrastructure Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
od943/2023_2024 : Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of unserviceable material by mechanical means, , for all leads and lifts, including loading, transporting, unloading to approved dumping ground or as approved by Engineer-in-charge and as per direction of Engineer-in-Charge.
6.48
-
-
... More
od945/2023_2024 : Demolishing masonry work (brick, cement concrete blocks, AAC blocks etc) manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material by mechanical means, , for all leads and lifts, including loading, transporting, unloading to approved dumping ground or as approved by Engineer-in-charge and as per direction of Engineer-in-Charge.
45
-
-
... More
od952/2023_2024 : Dismantling flooring/cladding work (tile, granite, marble etc) in floors, walls and roofs laid in cement mortar, for all leads and lifts, including disposal of unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved dumping ground or as approved by Engineer-in-charge and as per directions of Engineer-in-charge
155.37
-
-
... More
od959/2023_2024 : Demolishing R.C.C. work by manual/ mechanical means and stockpiling at designated locations, stacking serviceable and unserviceable material separately including cutting reinforcement bars and disposal of dismantled waste materials, for all leads and lifts, by mechanical means, including loading, transporting, unloading to approved dumping ground or as approved by Engineer-in-charge,
5
-
-
... More
15.12.1 : Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below
2
-
-
... More
15.12.2 : Of area beyond 3 sq. metres
5
-
-
... More
15.13.1 : Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area 3 sq. metes and below
1
-
-
... More
15.13.2 : Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area beyond 3 sq. metres
1
-
-
... More
50.14.1.1 : Removing and refixing door shutters after necessary repairs for easy opening and closing etc complete as per the direction of site Engineer-in-charge.
5
-
-
... More
CONCRETE
-
-
-
... More
50.4.1.1 : Providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc.
23.11
-
-
... More
50.5.4 : Providing and laying up to floor five level reinforced cement concrete in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with 1:1. 5:3 ( 1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size
19.36
-
-
... More
5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15sup0/sup landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
1.8
-
-
... More
5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
117.2
-
-
... More
5.9.15 : Centering and shuttering including strutting, etc. and removal of form for:Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like
72
-
-
... More
5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
2116.3
-
-
... More
10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
193.01
-
-
... More
od997/2023_2024 : Providing 100 mm thick cement concrete flooring with concrete hardener topping, under layer 88 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, etc. complete. Cement concrete shall be ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS:9103 to accelerate/retard setting of concrete, improve workability without impairing strength and durability. The concrete shall be placed and screeded to the finished grade, and floated to a uniform surface by using standard finishing techniques and as per direction of the Engineer - in – charge
2763
-
-
... More
11.3.1 : Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate
216.85
-
-
... More
11.4 : 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete
100
-
-
... More
11.5 : 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufactures specification. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
100
-
-
... More
od1004/2023_2024 : Providing and laying in position ready mixed light weight concrete using thermocol beads/perlite/vermiculite, in toilet sunken slab areas, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads and lifts, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS:9103 to accelerate/retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge.
103.98
-
-
... More
22.5 : Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
599.67
-
-
... More
BLOCKWORK
-
-
-
... More
50.6.1.6 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level upto floor five level thickness 20cm and above in : CM 1:6 ( 1 cement : 6 coarse sand sand) etc complete
60.95
-
-
... More
50.6.3.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete
0.6
-
-
... More
6.38 : Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above floor 2 level up to floorV level in cement mortar 1:4 (1 cement :4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.
1
-
-
... More
6.47 : Providing and laying autoclaved aerated cement blocks masonry with 150mm/
230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V
level with RCC band at sill level and lintel level with approved block laying polymer
modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The
payment of RCC band and reinforcement shall be made for seperately).
3.8
-
-
... More
od957/2023_2024 : Providing half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) in superstructure for creating ledge wall and filling after fixing concealed cistern etc complete as per direction of Engineer-in-charge.<br>
122.4
-
-
... More
FINISHING
-
-
-
... More
od933/2023_2024 : Plastering with cement mortar 1 : 4 ( 1 cement : 4 fine sand), 12 mm thick finished with a floating coat of neat cement including cost for scaffolding or form work as necessary, curing, providing plaster mesh at the junctions of masonry and concrete works as required etc. complete as per directions of Engineer-in-charge
449.46
-
-
... More
od939/2023_2024 : Plastering with cement mortar 1:3 ( 1 Cement : 3 fine sand), 15 mm thick on rough side of single or half brick wall finished with a floating coat of neat cement including supply and mixing water proofing material in cement plaster in proportion recommended by the manufacturers and cost of scaffolding or formwork as necessary, curing, providing plaster mesh at junctions of masonry, concrete or different surfaces as required etc complete and as per directions of Engineer-in-charge
127.2
-
-
... More
14.1.1 : Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)
1
-
-
... More
14.4.1 : Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba / rubbish to the nearest municipal dumping ground.For door / window / clerestory window
2.4
-
-
... More
13.78 : Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite / perite respectively conforming to IS : 2547 ( Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete.
374.83
-
-
... More
od963/2023_2024 : Forming groove of uniform size from 12x12 mm and upto 25 x 15 mm in the top layer of plastered surface as per approved pattern, including providing and fixing aluminium channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer -in-Charge.
493.2
-
-
... More
13.26 : Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
374.83
-
-
... More
13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
449.46
-
-
... More
13.44.1 : Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)
200
-
-
... More
13.85.3 : Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With water thinnable cement primer on walls surface having VOC content less than 50 grams / litre
374.83
-
-
... More
od995/2023_2024 : Painting walls/partitions/ceiling with two or more coats with premium acrylic emulsion paint having VOC content less than 50 grams / litre of approved brand and manufacture including applying additional coats wherever required to achieve even shade and colour after applying priming coats with suitable primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content and including cost of scaffolding or form work as necessary etc. complete as per directions of Engineer-in-charge
4968.74
-
-
... More
13.48A.1 : Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including
priming coat of exterior primer applied @ 0.90 litre/10 sqm.
1394.4
-
-
... More
13.50.3 : Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron /steel works
10
-
-
... More
13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
10
-
-
... More
13.99.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work
10
-
-
... More
od1027/2023_2024 : Painting wood work/MDF surface with PU paint of of approved make in required shade in high gloss/satin/matt finish as per requirement of Engineer-in-charge. Two or more coats of PU paint to be applied over two undercoats of primer over insulator coat as per requirement of manufacturer’s specification etc all complete as per directions of Engineer-in-charge
28
-
-
... More
22.24A : Providing & Applying high quality acrylic modified resin based texture of Dholpur/
Red sand stone Pattern with anti algae and UV resistance properties to be applied
as intermediate finish in desired pattern @ 43.04 kgs/10 sqm to form film of 1- 1.5
mm thickness after scrapping and properly cleaning the surface to remove loose
particles from the plaster surface, followed by top coating with Premium Acrylic
Smooth exterior paint with Silicone additives of required shade by two or more
coats @ 1.43 litres/10 sqm, complete as the direction of Engineer -in-Charge
90
-
-
... More
od1038/2023_2024 : Providing and applying texture paint as per the pattern approved by Engineer-in-charge in Asian paints Royale Play Lithos range or equivalent after scrapping and properly cleaning the surface to remove loose particles from the plaster surface, etc complete as the direction of Engineer-in-Charge. Material shall be as per the manufacturer's specification and application to be done by approved team of manufacturer.
42
-
-
... More
od1042/2023_2024 : 13.116 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:<br>1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos.<br>2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.<br>3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.<br>4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge.<br>(Final coat to be done in 1 or 2 layers without gap of time.)
5
-
-
... More
od1048/2023_2024 : Supply and fixing of Modified Clay Material of PHOMI make or approved equivalent, Facing Brick Series design, Eco friendly Building Material, manufactured through unfired patented (Ref: US patent 8505840 B2 & European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval. The material should be flexible, having good impact resistance, water resistant, Fire resistant and durable with a min. warranty of 10 years. MCM Phomi cladding panels to be fixed with suitable PU, Cement, Polymer based adhesive depending on the substrate with either Kerakol, Laticrete, Roffe, Pidilite. The material should be suitable for fixing on exterior, interior, flooring, ceiling, furniture covering and landscaping. Rate shall be inclusive of grouting of approved shade with required filling and pointing method to be used. For wet areas, MCM Phomi panels to be fixed with resin based adhesive to avoid efflorescence. For all flooring, bathroom and kitchen walls and wet area applications, protective PU coat to be used. The materials should have Abrasion resistance as per ASTM C241/C241M-15 of 8. Gray Scale value of 4 under ASTM G154-12a Cycle 1 & ASTM D2244-15a & ASTM D2616-12. Static Coefficient of friction as per ASTM C1028-07, Dry condition 1.11 and wet condition 0.70. Chemical Resistance as per ANSI Z124.6-2007 clause 5.20 with total rating of 76 and maximum stain depth 0.101mm. Water absorption ASTM C97/C97M-15 12.40 and Bulk specific gravity of 1.83. The product should be certified by Singapore Environment Council as Eco Friendly Building Material. The rates quoted shall be all inclusive for installation by the manufacturers authorised team. The work shall be executed as per approval and directions of Engineer-in-charge. Manufacturer’s warranty certificate to be submitted for 10 years.
55.86
-
-
... More
od1061/2023_2024 : Supply and installation of paintable decorative fibreglass wall covering with a homogeneous film of glue activated by water of approved make and brand on walls and ceilings as per directions of Engineer-in-charge. The product shall have fabric weight between 130 GSM to 390 GSM, PVC Free, Environment Friendly, Euroclass B-s1, d0 fire resistance certification (EN 13501-1) and Product Class II / Class III Oeko-tex standard 100 certified
288.96
-
-
... More
FLOORING AND CLADDING
-
-
-
... More
od947/2023_2024 : Providing and laying vitrified floor tiles of size 1800 x 1200 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg) including filling /grouting and finishing complete as per direction of Engineer-in-charge. The tiles must be cut with zero chipping diamond cutter. Laying of tiles to be done with notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily.
635
-
-
... More
od953/2023_2024 : Providing and laying vitrified floor tiles of size 1000 x 1000 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg) including filling /grouting and finishing complete as per direction of Engineer-in-charge. The tiles must be cut with zero chipping diamond cutter. Laying of tiles to be done with notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily.
2168
-
-
... More
od965/2023_2024 : Providing and laying vitrified floor tiles of size 600 x 600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg) including filling /grouting and finishing complete as per direction of Engineer-in-charge. The tiles must be cut with zero chipping diamond cutter. Laying of tiles to be done with notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily.
391
-
-
... More
od966/2023_2024 : Providing and laying Vitrified tiles of size 1200x1800 mm (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade, in wall cladding, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints etc complete as per directions of Engineer-in-charge
30
-
-
... More
od971/2023_2024 : Providing and fixing Vitrified tile slab 15 mm thick of size 2400x800mm for wall cladding with special adhesive over 12mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand), including pointing in white cement with an admixture of pigment to match the tile shade etc complete as per directions of Engineer-in-charge.
30
-
-
... More
od974/2023_2024 : Providing and laying Vitrified tiles of size 1800x1200 mm (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.<br>
30
-
-
... More
od978/2023_2024 : Providing and laying Vitrified tiles of size 1000x1000 mm (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.<br>
3
-
-
... More
od989/2023_2024 : Providing and laying Vitrified tiles of size of Tile 600x600 mm (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.<br>
26.48
-
-
... More
od992/2023_2024 : Providing and fixing Vitrified full body tiles of size 1200x600 mm conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
379.99
-
-
... More
od138947/2023_2024 : Providing and laying vitrified floor tiles/slabs of size 2400x800 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily.
135
-
-
... More
od138948/2023_2024 : Providing and laying vitrified floor tiles of size 800x1600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily.
30
-
-
... More
11.42 : Deduct for not using 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) bedding in laying of floor tiles.
2968
-
-
... More
11.43 : Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive ( Water based) conforming to IS : 15477, in average 3 mm thickness.
2968
-
-
... More
od1002/2023_2024 : Providing and fixing slab for kitchen platforms, vanity counters, window sills, facias and similar locations, using 15 mm thick full body vitrified tile slab of size 2400x800 mm, conforming to IS:15622, approved make, shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, edge moulding and polishing to edges to give high gloss finish etc. complete at all levels. i
85.2
-
-
... More
11.54.1 : Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of: a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on the G.I. Base plate of size 100mmx100mmx3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5mm welded with GI fully threaded stud 16 mm outer diameter with two GI check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug. b) Stringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80 mm thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in-charge. c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel Guages: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with light weight foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology upto 1mm thickness for superior adhesion and Surface flatness within 0.75mm. The panel is to withstand a Concentrated Load of 363 Kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50 kg all complete as per the approved manufacturers specification and as per the direction of Engineer-in-charge. All specification must be printed on the side of the panel to ensure the quality of the product.300 mm Finished Floor Height (FFH).
93.75
-
-
... More
PARTITIONS AND JOINERIES
-
-
-
... More
od930/2023_2024 : Providing and fixing partition having 98 mm overall thickness with gypsum plasterboard 13mm thick USGKnauf Boral Multistop plaster board/ Gyproc Habito board or equivalent, including frame work made of special sections power pressed/ roll form G.I. sheet with Zinc coating of 120/150 gsm , consisting of floor and ceiling channel 32x72x32x0.5 mm size 72 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm diameter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 34x70x36x0.5 mm 70mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, noggin channel 40x70x40x0.5mm as required, insulation to be provided with Resin Bonded rock wool conforming to IS: 8183, having density 48 Kg/m3, 50mm thick, wrapped in 200 G Virgin Polythene Bags fixed to boards with screw, rawl plug & washers and held and in position by criss crossing GI wire and fixing of gypsum board on both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre, with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher, and two coats of primer suitable for board as per manufacturer's specification, etc complete as per direction of Engineer-in-charge. The junction of the partition with masonry & all penetration through the partition has to be treated with Hilti/Pyroplex fire and acoustic sealant. Note: Area from FFL to bottom of false ceiling height only will be measured for payment.
1365.56
-
-
... More
od143117/2023_2024 : Providing and fixing Single glazed partitions using Kubik Lite/ Dormakaba ALTERRA LITE System 45 Frames or any equivalent brand with 12mm thick toughened glass to a height of maximum 3 m that shall be able to provide a sound reduction of 36.7 dB. The glass panels shall be supported by Aluminium WCP Profiles of 25x45mm having 2 mm gauge thickness on all 4 sides of the Glass partition perimeter. Stickon profiles to be provided at a spacing of 600 mm c/c. Glass-to-glass butt joints shall be provided with Suitable junction profiles are to be used at glass-to-glass joints such as H Junction profile to be used at all Glass to Glass vertical joints, 90 Deg L Junction Profiles and T Junction profiles necessary as per design. Finishes of all aluminium frame components shall be Black Anodized Finished (20 microns). At the location of doors, End Profile frame, suitable for stile/flush door, of size 45 x 50 mm shall be provided around the door two vertical upto false ceiling and horizontal at door top. Adjacent to the door frame, suitable service profile to be provided for installing the access control system as per requirement. Rate shall include for providing and fixing necessary support arrangement to ensure proper anchorage / fixing to the ceiling/partition to get sufficient rigidity (to the required level). Rate shall include for transport charges, handling, loading and unloading, installation of glass and protecting the module and glass till handing over, testing, commissioning all necessary hardware, Structural supports, scaffolding, wastage, etc. complete and all as per manufacturers specifications as directed. The vendor has to prepare the shop drawing for approval of Engineer-in-charge. Note : Only the clear elevation area below the false ceiling level shall be considered for measurement and payment
1300.99
-
-
... More
9.154 : Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6 mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically & horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ceiling/floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer-in- charge.
475.17
-
-
... More
od949/2023_2024 : Providing and fixing partition above false ceiling, at locations of glass partitions, made out of aluminium box frame using extruded sections of size 50 x 25 mm - 1.5mm thick at 600mm c/c in both direction covered with panelling on both sides with 12.5 mm thick tapered edge gypsum fire resistant board including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and insulation to be provided with Resin Bonded rock wool conforming to IS: 8183, having density 48 Kg/m3, 50mm thick, wrapped in 200 G Virgin Polythene Bags fixed to boards with screw, rawl plug & washers and held and in position by criss crossing GI wire as per directions of Engineer-in-charge. Rate shall include cost for necessary hardwares and shall include for forming a panelling to any shape including circular profile etc. complete. Actual seen surface area.(i.e) from false ceiling to true ceiling height will be measured and paid.
433.66
-
-
... More
od964/2023_2024 : Providing and fixing partition consisting of G.I. frame and with 12.5 mm thick double skin fire rated board conforming to IS : 2095 : part I above ceiling for compartmentalisation around air conditioning units, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with Zinc coating of 120 gms/ (both side inclusive), consisting of channels 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall/true ceiling with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to one side of frame work by 25 mm long dry wall screws on studs and channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of Engineer-in-charge all complete.
204
-
-
... More
od980/2023_2024 : Providing and fixing partition made out of aluminium box frame using extruded sections of size 50 x 25 mm - 1.5mm thick at 600mm c/c in both direction covered with panelling on both sides with 12 mm thick fire retardant plywood conforming to IS: 5509 up to 75mm above false ceiling as per directions of Engineer-in-charge. Balance area above false ceiling to be covered with gypsum board and will be measured in corresponding item. Insulation to be provided with Resin bonded rock wool conforming to IS: 8183, density 48 kg/m3, 50 mm thick, wrapped in 200 G virgin Polythene bags, fixed to plywood and held in position by criss-crossing Gl wire. Rate shall include cost for necessary hardware's and shall include for forming a panelling to any shape including circular profile etc. complete. Note: Actual seen surface area will be measured and paid.
9
-
-
... More
od996/2023_2024 : Providing and fixing 12 mm thick fire retardant plywood conforming to IS: 5509 to existing frame, backing or studding with screws etc. complete as per directions of Engineer-in-charge
57.15
-
-
... More
od1005/2023_2024 : Providing and fixing 8 mm thick marine plywood conforming to IS: 710 with necessary screws/nuts/ bolts/nails on existing frame work, etc. complete as per direction of Engineer-in-charge
10
-
-
... More
od1012/2023_2024 : Providing & fixing 6 mm thick lacquered glass of (Saint Gobain or app. equivalent) and of approved shade as per pattern and details given in drawing, fixed with compatible SGG Glassmate Ultrafix - Neutral Alkoxy based Silicone having Shear Bond Strength (Dry, 24 hours), greater than 450 kpa and tack free time of 10 to 30 mins compatible for installation of mirror and lacquered glass / SGG Glassmate Mirror mounting tape MIRROR MOUNTING TAPE - Foam based double sided adhesive tape for instantaneous adhesion, compatible with mirror and lacquered glass having Shear bond strength (Dry, 15 mins) of 250 to 350 kpa) on a perfectly leveled surface. The contractor should submit test reports for back painted glass from manufacturer - High humidity Resistance (conforms to BS EN 1036 1999); Color fastness ISO 105B02 standard & Mechanical Resistance ISO 7784 ( Taber Abrasion test ) ISO 2409 ( Cross Hatch Test ) standard The manufactured back painted glass should be environmentally friendly (no lead, no arsenic, no copper, no formaldehyde); appropriate recycled content (12% post industrial / 6% post consumer); compressive strength (1000 MPa) & tensile strength (40 MPa),same as float glass, etc all complete as directed and to the satisfaction of the Engineer-in-charge. At junctions with other materials aluminium profiles to be considered. Rate to include all wastages, necessary supports & backing to ensure rigidity, levels & plumb, etc complete.
57.15
-
-
... More
od138991/2023_2024 : Providing and fixing of 8mm thick lacquered glass of approved colour and Saint Gobain or equivalent make over the existing partition, paneling or wall / Column surfaces. The rate shall be inclusive of necessary SS Stud, hardware and wastage etc; complete.
7.2
-
-
... More
od1021/2023_2024 : Supply & fixing of 9 mm thick PET Acoustic Panels with grooves in approved pattern of approved make on Partition / Masonry wall surface and as directed using appropriate adhesive as per manufacturer instructions and edging profiles of natural anodised aluminium edging with counter sunk holes punched every 300mm. The rate shall be inclusive of preparing the base surface, all wastages, etc. Note : Only the actual installed area shall be measured for payment.<br>
57.15
-
-
... More
od1031/2023_2024 : Providing and fixing pin up board 9 mm thick soft board wrapped with 100% polyester fabric with 375 grams/metre weight and fire retardant having flammability conforming to BS EN 1021-1: 1994 (Cigarette) BS 7176: 1995 Low Hazard (make: Response Fabrics or equivalent) to be fixed with aluminium edge profile framework and all accessories complete as per directions of Engineer-in-charge
10.8
-
-
... More
od1033/2023_2024 : Providing and fixing 100mm height Aluminium Modular skirting of approved make at Masonry walls & Partitions, and of approved shape & profile . The systems shall be of complete aluminium type including capping strips. It shall be made of extruded aluminium of 1.3mm gauge avg. & anodized to 20 microns avg. Rate to include supply & installation of matching colour corner guards. Rate to include all hardware, etc complete.
700
-
-
... More
od1040/2023_2024 : Providing and fixing panelling (wall, column etc), made with single layer 12 mm thick fire retardant plywood fixed over framework of Aluminium extruded sections of size 50x25mmx1.5mm thick in both horizontal and vertical direction at 600 mm c/c spacing. The plywood shall be fixed up to 75mm above false ceiling and open edges with walls to be sealed with plywood. The rate shall include cost of all necessary hardware's etc; as required for completing the works. Note: Actual seen surface area.(i.e) from FFL to bottom of false ceiling height will be measured and paid.
6.48
-
-
... More
od1043/2023_2024 : Providing and fixing PVC sheet Century Starke/Thomson Multi wood board or equivalent make panelling 12 mm thick, to frame, backing or studding with screws etc. complete, aluminium box frame using extruded sections of size 50 x 25 mm - 1.5mm thick at 600mm c/c in both direction up to 75mm above false ceiling as per directions of Engineer-in-charge. Rate shall include cost for necessary hardwares and shall include for forming a paneling to any shape including circular profile etc. complete. Actual seen surface area.(i.e) from FFL to bottom of false ceiling height will be measured and paid
7.29
-
-
... More
9.127.2 : Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss/ matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Types S, including cost of adhesive of approved quality.1.0 mm thick
7.29
-
-
... More
od1051/2023_2024 : Providing and fixing in position flush doors with door frame using second class teak wood, wrought framed, melamine polished and fixed in position with hold fast lugs or with dash fasteners of required dia & length and factory finished ISI marked flush door shutters 30 mm thick conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of I st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters, providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters and laminated with 1 mm thick decorative laminate sheet, including fixing with accessories such as ISI marked Stainless Steel butt hinges with necessary screws and other accessories such as round cylindrical door knob and lock, aluminium tower bolt 250x10 mm, hydraulic door closer, hanging type floor door stopper, aluminium Decorative type Louvers for ventilation in matching colour etc complete as per directions of Engineer-in-charge
19.2
-
-
... More
od1054/2023_2024 : Providing and fixing in position flush doors with door frame using second class teak wood, wrought framed, melamine polished and fixed in position with hold fast lugs or with dash fasteners of required dia & length and factory finished ISI marked flush door shutters 40 mm thick conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters, providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters and laminated with 1 mm thick satin finish decorative laminate sheet, vision panel to be provided with bevelled glass 8 mm thick with required lipping including fixing with accessories such as ISI marked stainless steel butt hinges with necessary screws and other accessories such as SS tubular door handle 600 mm long, brass mortise latch and lock with 6 levers without pair of handles, concealed door closer with sliding arm, hanging type floor door stopper etc complete as per directions of Engineer-in-charge
2.88
-
-
... More
9.121 : Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
39.2
-
-
... More
9.122.2 : Providing and fixing to existing door frames.30 mm thick Fiberglass Reinforced Plastic (F.R.P) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used all filler material throughout the hollow panel, casted monoolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS : 14856, complete as per direction of Engineer-in-charge.
10.88
-
-
... More
9.82 : Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
8
-
-
... More
9.74.3 : Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:150x10 mm
8
-
-
... More
9.77 : Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete
8
-
-
... More
od1074/2023_2024 : Providing and fixing, in position concealed G.I. section for wall paneling using 8 mm thick Cement bonded wood particle board as per IS:14276 of decorative finish as per approval of Engineer-in-charge fixed on the 'W' profile (0.55 mm thick) having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm and another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to the 'W' profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as per the drawing and directions of engineer-in-charge, the joints of the boards are finished with specially formulated jointing compound and 48 mm wide jointing tape to provide seamless finish.<br>
8.4
-
-
... More
od1075/2023_2024 : Providing and fixing in wall lining fluted MDF board 12 mm thick including fixing arrangement with screws/adhesive etc. complete as per directions of Engineer-in-charge
1
-
-
... More
od1076/2023_2024 : Providing and fixing in wall lining Thomson woodex or equivalent WPC fluted panels, including fixing on existing surface or frame work as per manufacturer's specification etc. complete and as per directions of Engineer-in-charge
144
-
-
... More
9.133.2.2 : Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the 'W' profile (0.55 mm thick) having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm and another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to the 'W' profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as per the drawing & directions of engineer-in-charge, the joints of the boards are finished with specially formulated jointing compound and 48 mm wide jointing tape to provide seamless finish.Non-asbestos multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process (high pressure steam cured) as per IS: 14862 with suitable fibre cement screw8 mm thick Cement bonded wood particle board as per IS:14276
64
-
-
... More
od1080/2023_2024 : Providing and fixing fire resistant door having 120 minutes fire rating with frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/m2) suitable for mounting 120 min Fire Rated Door Shutters , filled with Mineral wool Insulation having density min 96Kg/m2, fixing with G.I. Anchor fasteners (5 each on vertical style & 3 on horizontal style of size M10 x 80 ) in the opening along with Factory made templates for fixing hinges, door closers etc, fixing 60 mm thick fire resistant door shutters of 120 min fire rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make. The door frame and shutter shall be finished with approved fire resistant primer and powder coated in not less than 30 micron in desired shade as per NBC 2016, IS 16231 (Part 3):2016. The rate shall also include provision for required fittings such as lock and handle of reputed brand and manufacture to be approved by the Engineer -in-charge, all complete.
5.4
-
-
... More
od1083/2023_2024 : Supplying and installation of steel Fire door with Fire Rating of 120 minutes rating as per manufacturers specification and tested in accordance with IS 3614 Part-2 BS 476 Part-22 . (a) Fire resistant door frame made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) of section 100x57 mm having built in single rebate duly filled with vermiculate based concrete mix, suitable for mounting door shutters, kerf frame fitted with intumescent fire seal strip of size 10x4 mm (minimum) all-round the frame and fixing with dash fastener of approved size and make, reinforcement pads for fixing of door closer at appropriate location, factory finished pre-punched cut-outs to receive specific hardware and ironmongery, requisite mortar guard, hinge plates predrilled to receive hinges for screw mounted fixing, minimum of five anchors per jamb suitable for adjoining wall construction, etc as per site conditions, Grouting the frame with cement slurry including providing necessary Hilti make Intumescent Joint Filler - code no CP 606 or Wacker - R - Glazing & Metal (Elastomeric / Intumescent) in the gaps between Wall & Frame to the required thickness and to be applied by using suitable Dispenser tool etc complete as per manufacture's specification. (b) Fire door shutters to be manufactured from 16 SWG G.I. sheets(zinc coating not less than 120 gm/sqm) to be press formed to 50 mm thick double skin hollow door with lock seam joints at stile edges with a bending radius of 1.4 mm, with internal reinforcement at top, bottom and stile edges made out of 16 SWG G.I. sheet duly filled FR insulation material (96 kg/cum density), the door face should not have visible screws or fasteners on either face and the doors to have pre-drilled hinge plates with hinge guard covers, fixing with necessary stainless steel ball bearing hinges in the factory prepared pre-punched cut-outs and reinforcements, locks with concealed lock box with lock fixing brackets with pre-tapped holes, door closer reinforcement pads at appropriate location (c) Vision panel of size 200x600 mm using 6 mm clear fire resistant glass fixed with GI beading of appropriate size, fire resistant sealant, beading, screws from inside etc. The rate shall also include provision for finishing with zinc phosphate storing primer and powder coated in not less than 30 micron in desired shade as per NBC 2016, IS 16231 (Part 3):2016. The rate shall also include provision for required fittings such as door closers, panic bar / latch (Double point ) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer -in-charge, all complete. Rate shall be inclusive of making required provisions for fixing access control unit. Warranty: 5 years Maunfacturer's certificate to be submitted.
36
-
-
... More
od1084/2023_2024 : Providing and fixing 12 mm thick frameless toughened patch fitting glass door with fixtures of Dorma make or equivalent, including providing and fixing patch fittings, floor spring with SS cover plate suitable for the door size and weight, lock with euro profile cylinder keys 3 nos, strike patch for lock, 600 mm pull handle SS Satin finish of shape to be approved by Engineer-in-charge, door stopper half dome type and making necessary holes etc. for fixing required door fittings, provision for fixing electromagnetic lock plate, etc. all complete as per direction of Engineer-in-charge
3.6
-
-
... More
od1085/2023_2024 : Providing and fixing 12 mm thick frameless toughened glass door with corner hinges and other fixtures of Dorma make or equivalent. The rate shall be including providing and fixing corner hinges with all accessories, , door closer with slide channel and universal saddle plate, centre lock with euro profile cylinder keys 3 nos, strike patch for lock, 600 mm pull handle SS Satin finish of shape to be approved by Engineer-in-charge, making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge
3.6
-
-
... More
od1086/2023_2024 : Providing and fixing etching to glass panels using 3M frosted film (sparkling type) of Code No. 7725 with 15 years warranty, as per required pattern and design and as directed. Rate shall be inclusive of all wastages, etc.<br><br>Note : Only the actual installed area shall be measured for payment.
10
-
-
... More
od1088/2023_2024 : Providing and fixing etching to glass panels using 3M film (Code No. 7725 with 5 years warranty) of approved color printed graphics as directed. Rate shall be inclusive of all wastages, etc.<br><br>Note : Only the actual installed area shall be measured for payment.
28
-
-
... More
od1091/2023_2024 : Providing and fixing of Vinyl Graphics using 3M film (Code No. IJ180C with 5 years warranty) as per approved design and at specified locations as directed by Engineer-in-charge. The rate shall be inclusive of preparing the base surface to smooth finish as per the manufacturer's/ vendor's requirement, all complete and as directed. Rate shall be inclusive of all wastages, etc. Note : Only the actual installed area shall be measured for payment.
30.24
-
-
... More
od1093/2023_2024 : Providing and laying of premium quality Wallpaper of approved make and design over partition / panelling / wall surfaces. Rate to include preparation of base surface to smooth finish as per manufacturer's requirement, all complete and as directed. Rate shall be inclusive of all wastages, etc. The wallpaper shall be moisture resistant, durable, long lasting, energy saving, thermal insulating with a warranty of 1 year. Note : Only the actual installed area shall be measured for payment. Note : Basic rate of Wallpaper = Rs.85.00 per sq.ft.
10
-
-
... More
21.19.1 : Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/ Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600Upto 5 mm depth and 5 mm width
50
-
-
... More
FALSE CEILING
-
-
-
... More
od936/2023_2024 : Providing and fixing false ceiling using 12.5 mm thick tapered edge gypsum fire resistant board conforming to IS : 2095-Part 1 at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120-150 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, providing vertical edges for a depth of 100 mm at junctions of different type of ceilings, concealed cove lighting etc as per design including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint, applying plaster of paris putty to prepare even and smooth, two coats of primer suitable for board, painting two or more coats with premium acrylic emulsion paint having VOC content less than 50 grams/litre of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour, all as per manufacturer's specification and also including the cost of making openings for light fittings, cove lighting, profile lighting, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge Note: The plan area only will be measured for payment
63.9
-
-
... More
od940/2023_2024 : Providing and fixing false ceiling using 12.5 mm thick tapered edge gypsum moisture resistant board conforming to IS : 2095-Part 1 at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120-150 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, providing vertical edges for a depth of 100 mm at junctions of different type of ceilings, concealed cove lighting etc as per design including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint, applying plaster of paris putty to prepare even and smooth, two coats of primer suitable for board, painting two or more coats with premium acrylic emulsion paint having VOC content less than 50 grams/litre of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour, all as per manufacturer's specification and also including the cost of making openings for light fittings, cove lighting, profile lighting, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge Note: The plan area only will be measured for payment
173.47
-
-
... More
od948/2023_2024 : Providing and fixing false ceiling using 12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1 at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120-150 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, providing vertical edges for a depth of 100 mm at junctions of different type of ceilings, concealed cove lighting etc as per design including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint, applying plaster of paris putty to prepare even and smooth, two coats of primer suitable for board, painting two or more coats with premium acrylic emulsion paint having VOC content less than 50 grams/litre of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour, all as per manufacturer's specification and also including the cost of making openings for light fittings, cove lighting, profile lighting, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge Note: The plan area only will be measured for payment
871.85
-
-
... More
od968/2023_2024 : Providing and fixing tiled false ceiling of GI Metal Ceiling Lay in perforated Tegular edge global white/black/wooden colour tiles of size 595x595 mm and 0.5 mm thick with 8 mm dr op; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fibre acoustical fleece., in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile, rotary stitched double webbed with 6mm reveal profile (colour as per site condition and direction of EIC), comprising of main-T runners of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm.Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
565.05
-
-
... More
od985/2023_2024 : Providing and fixing tiled false ceiling at all heights with GI Metal Ceiling Lay in perforated Tegular global white color tiles of size 1195x595 mm and 0.5mm thick with 8 mm dr op; made of GI sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyster powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece , to be laid in true horizontal level, suspended on Silhouette profile, rotary stitched double webbed white with 6 mm reveal profile (white/black) inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x38 mm of length 3000 mm, cross - T of size 15x38 mm of length 1200 mm and secondary intermediate cross-T of size 15x38 mm of length 600mm to form grid module of size 1200 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.
462
-
-
... More
od1000/2023_2024 : Providing and fixing of 150mm width Techzone Module of approved brand Suspended ceiling system as per the required centre-to-centre spacing as per the ceiling drawings. The Techzone orientation shall be such that the main runners run parallel or perpendicular to the technical zone as indicated in the ceiling drawings. The 150mm wide technical zone formed is where the technical elements like lighting fixtures, HVAC diffusers, etc would be installed. Where there are no technical elements the technical zone would be covered by using Metal Technical Panels of size 1200mm x150mm in conjunction with a special 150mm long cross tee, interlocked at every 1200mm in the technical zone.
5.4
-
-
... More
od1003/2023_2024 : Providing and fixing tiled false ceiling at all heights with GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm deep; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending to be laid in true horizontal level, suspended on Silhouette profile, rotary stitched double webbed white with 6 mm reveal profile (white/black) inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.
57.6
-
-
... More
od1013/2023_2024 : Providing and fixing decorative ceiling with wooden fins of size 25x100 mm using 25 mm thick BWR plywood finished with 1.0 mm thick laminate of approved colour and shade provided at false ceiling level with adequate support from RCC slab as per design etc complete and as per directions of Engineer-in-charge Rate shall be inclusive of all hardware, wastages, etc, complete.
5.76
-
-
... More
od1018/2023_2024 : Providing ceiling trap door/access panel in false ceiling of 300 mm x 300 mm size made from aluminium powder coated frame and MR gypsum board with click lock, guard hook, safety rope, brush sealing strip etc. The rate shall include for finished with two coats of premium acrylic emulsion paint over a coat of primer and putty as directed by Engineer-in-charge
14
-
-
... More
od1024/2023_2024 : Providing ceiling trap door/access panel in false ceiling of 600 mm x 600 mm size made from aluminium powder coated frame and MR gypsum board with click lock, guard hook, safety rope, brush sealing strip etc. The rate shall include for finished with two coats of premium acrylic emulsion paint over a coat of primer and putty as directed by Engineer-in-charge
10
-
-
... More
od1032/2023_2024 : Providing ceiling trap door/access panel in false ceiling of 1200 mm x 600 mm size made from aluminium powder coated frame and MR gypsum board with click lock, guard hook, safety rope, brush sealing strip etc. The rate shall include for finished with two coats of premium acrylic emulsion paint over a coat of primer and putty as directed by Engineer-in-charge
8
-
-
... More
MISCELLANEOUS
-
-
-
... More
od934/2023_2024 : Providing and fixing Pelmet for concealing the pull-down projector screens and blinds. The pelmet shall be made of 19mm thick BWR. ply finished with enamel paint of approved shade. It shall be of 'U' shape of size 150 x 150 mm and its bottom level shall be fixed flush with the adjoining false ceiling level so as to recess the pelmet. Rate to include all hardware and supports for sufficient rigidity and to receive the false ceiling perimeter channels.
60
-
-
... More
od951/2023_2024 : Supply and installation of VISTA Roller Blinds blackout Series‐ Venice/ Volga Opaque or equivalent make with Control unit made of high strength reinforced plastic with clutch of wrap spring design, High carbon steel springs provided to transmit motion from driving to driven members of clutch mechanism., Clutch operated directionally by the use of endless beaded chain, Idler of high strength reinforced plastic, consisting of a centre shaft mounted on the bracket by using a plastic lock, metal sleeve inside the plastic lock provides bearing surface for the centre shaft, which rotates freely, providing smooth, quiet and long wearing operation, Head rail of aluminium extruded rail Powder coated in white, Control unit and Idler are mounted on the Head rail with powder coated M.S. brackets, Roller tube anodized extruded tube of high strength alloy, Control unit and Idler are fixed to the either ends of the tube, fabric of the blind is fitted to the tube with heavy duty adhesive tape, Bottom rail of aluminium extruded rail with a groove for fixing the fabric and power coated in white, fixed to the bottom of the fabric to keep the fabric in tension and straight using plastic ins ert, ABS end caps , Operating chain made of 4.5mm plastic beads moulded on 2.2mm thick polyester chord with pitch of the beads 6mm, Fixing brackets & clamps to fix the blind to the wall or ceiling. 'L' bracket made of mild steel and zinc plated, the clamp shall be made up of spring steel of thickness O.7mm and zinc plated, Roller tube of Aluminum alloy Extruded grooved tube anodized of size 32mm O.D. and weight ‐ 0.27 kg/mtr Size‐ 38mm‐ O.D.; weight ‐ 0.38 kg/mtr Size‐ 50mm‐ O.D.; weight ‐ 0.60 kg/mtr Alloy & temp‐ 6063‐T6 Fabric is fitted on the tube with double sided tape. Bottom Rail: Extruded Aluminum grooved section‐ powder coated in white Size: 21mm O.D. Alloy‐HE9WP Weight‐0.28 Kg/mtr. Fabric is fitted to the bottom rail with plastic ins ert. Bottom rail end cap‐ made of ABS. Fabric Blackout Polyester, Fabric Thickness 0.6 mm, Fabric Weight +5% 330 GSM, Fabric Width 230 cms, Fire Resistance NFPA 701 AATCC 16‐2003 4.5, Environmental Certification Green Guard Certified, Other Properties Anti Fungal & Anti Bacterial Fabric, etc complete as per directions of Engineer-in-charge .
144
-
-
... More
od956/2023_2024 : Supply and installation of VISTA Ailanto 50 MM Wooden Venetian Blinds – Manual Operated or equivalent with Bass Wood Slats ; Width= 50mm (+/‐0.5mm); Thickness= 3mm (+/‐ 0.5mm), Head rail 53 mm high and 63 mm wide made of aluminium alloy provided with matching shade of slats, Valance fitted in the head rail of height 50 mm, Head rail covered by two end caps made up of PVC, Drum & Cradle of moulded ABS components with high strength , Tilter Lock made up of aluminium & fitted inside the head rail, Cord lock fitted inside the head rail & made up of steel providing locking arrangement for the cord and stops the slats at the desired heights that prevents blind from crashing down, if released abruptly, Tilting Cord 2mm in diameter, braided high strength polyester fibre cord for maximum abrasion resistance and minimum elongation provided with matching shade of slats, wooden tassels‐ 2 nos., Lift Cord 2mm in diameter, braided high strength polyester fibre cord for maximum abrasion resistance and minimum elongation provided with matching shade of slats with wooden tassel‐ 1 no. and equaliser‐1 no., Bottom Rail made of Bass Wood ; Width= 50mm (+/‐ 0.5mm), installation Bracket made up of Steel with spring loaded brackets, Tilting Rod made of steel of size 6 mm Square rod fixed in the tilter mechanism and drives the drum to rotate the Slats etc all complete as per directions of Engineer-in-charge
12
-
-
... More
od962/2023_2024 : Supply & Fixing of Urinal modesty panels of MERINO or equivalent make of B-type shape 1200x450mm size with 12mm Compact Laminate of approved shade fixed with S.S clamps, etc, as per manufacturer specifications.
14
-
-
... More
od969/2023_2024 : Providing & fixing Modular Toilet cubicles of MERINO make of TITAN 12mm STD SERIES or approved Equivalent - complete set including partitions and S.S 304 grade accessories such as Top Rail, Coat hook with Door stopper, Occupancy indicator, Door Knob, 'U' Channel, 'F' Channel, screws, Adjustable Legs, etc complete and with Rubber strip for the groove in the Pilaster for reducing noise. The cubicle shall be of Pilaster & S.S Leg Floor-mounted type with overhead bracing taking into consideration the stability of the panels. Top bracing shall be connected to the wall for additional support and stability. Wall brackets and corner brackets to be used while assembling the cubicles. In addition, the door should have a self-closing hinge and an indicator slip latch or bolt with a knob outside and 2 coat hooks inside. Note: Contractor to submit shop drawing for approval before start of works. The panels and doors shall be constructed out of 12mm thick Compact Laminate of approved shade. a) Compartment depth & width: as per the drawings / site measurement b) Door width: 600 mm c) Overall Height : 2100 mm (including bottom gap of 150 mm)
35
-
-
... More
od977/2023_2024 : Providing and fixing bevelled edge mirror of superior glass 6 mm thick (of approved quality and make) and of required shape and size over 12mm PVC panel of approved make with adhesive, S.S studs of appropriate size and numbers. The mirror shall be provided with polythene sheet backing so as to avoid direct contact of moisture with the silver coating on the mirror rear side. Rate shall be inclusive of all hardware, labour, etc, complete and as per directions of Engineer-in-charge
13.86
-
-
... More
od999/2023_2024 : Supply and installation of Display signage board in acrylic sheet of sufficient thickness of size 1.20x1.50m fixed with suitable method to wall and fixing acrylic cut logos and brass name plates with vinyl lettering etc complete as per directions of Engineer-in-charge
1
-
-
... More
od1006/2023_2024 : Providing and fixing of Conference Room signage with metal frames and Brass nameplates with open frame slider design to display the availability of any event. Signage to be brass make with brush metal finish with vinyl lettering signs of approved shade and of size 400 x 100 mm. The brass signage shall be pasted using double-sided tape of 3M make on the Flush doors etc. complete as per directions of Engineer-in-charge.
2
-
-
... More
od1010/2023_2024 : Providing and fixing of Room Nomenclature Signages Brass make with brush metal finish with acid etched signs of approved shade and of size 125 x 125 mm for Toilets. The brass signage shall be pasted using double-sided tape of 3M make on the Flush doors etc. complete as per directions of Engineer-in-charge.
6
-
-
... More
od1015/2023_2024 : Providing and fixing of Room Nomenclature Signages in Brass plate with brushed metal finish with vinyl cut lettering of approved shade and of size 400 x 100 mm. The brass signage shall be pasted using double-sided tape of 3M make on the Glass doors/ Flush doors.
10
-
-
... More
od1030/2023_2024 : Providing and displaying of Sansevieria well developed with fresh and healthy 30 to 60 cm ht in 25 cm size earthern Pot/ Plastic pot as per direction of the Engineer-in-charge
90
-
-
... More
od1039/2023_2024 : 3.80Providing and displaying of Rubber plant variegated, well developed, having 45 to 60 cm ht.with fresh, healthy and attractive colorful leaves in 20 cm size Earthen pot/Plastic pot
5
-
-
... More
od1044/2023_2024 : 3.79Providing and displaying of Rubber plant black variety, well developed, having 45 to 60 cm ht.with fresh, healthy and attractive colorful leaves in 25 cm size Earthen pot/Plastic pot as per direction of officer-in-charge.
5
-
-
... More
od1049/2023_2024 : 3.78Providing and displaying of Raphis palm plant, having ht. 1.50 m to 1.65 m with 40 to 50 lush green suckers, well developed, fresh & healthy foliage leaves in 40 cm size of Earthen Pot/Chali/Tray & as per direction of the officer-in-charge.
5
-
-
... More
od1050/2023_2024 : 3.75Providing and displaying of Raphis palm plant, having ht. 45 cm to 60 cm with 5 to 7 suckers, well developed, full of fresh and healthy leaves in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.
20
-
-
... More
od1057/2023_2024 : 3.70Providing and displaying of Philodendron selloum plant, having ht. 45 cm to 60 cm with 12 to 16 leaves, well developed, fresh and healthy foliage in 30 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.
6
-
-
... More
od1060/2023_2024 : 3.58Providing and displaying of Monestaria plant mounted on moss stick 90 cm ht., 2 to 3 plant in one pot well developed with fresh & healthy foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.
4
-
-
... More
od1064/2023_2024 : 3.19Providing and displaying of Areca Palm plant, having ht. 1.20 m to 1.50 m with 5 to 6 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.
10
-
-
... More
od142362/2023_2024 : Supply and installation at site unbreakable round high grade polymer pot of size 300mm dia or nearest size in approved colour as per directions of Engineer-in-charge. Rate shall be inclusive of transportation handling etc complete.
55
-
-
... More
od142363/2023_2024 : Supply and installation at site unbreakable rectangular high grade polymer pot of size 600x300x300mm or nearest size in approved colour as per directions of Engineer-in-charge. Rate shall be inclusive of transportation handling etc complete.<br>
30
-
-
... More
MODULAR FURNITURE
-
-
-
... More
od104784/2023_2024 : Supply and installation of Work Stations (Open Office System) 1200mm X 600mm X 750mm ht Sharing type with table top made of 25mm thick Prelaminated particle board E1 grade conforming to IS:12823, edge finished with 2mm PVC edge banding, supported on under structure made of ERW CR Tube of appropriate size approx 16g thk powder coated with suitable levellers at either ends and connectors with appropriate sections provided in between the leg for support; mast leg/ central leg with vertical cable raiser and horizontal continuous power beam for integrated wire management, provision for fixing sockets, soft closing access flip boxes/grommet fitted on table top, MS perforated powder coated modesty panel of 350 mm ht at aisle and passage side, below power beam/raceway/wire tray MS powder coated Perforated Modesty of 300 mm ht etc complete as per directions of Engineer-in-charge (Warranty period: 5 years) Manufacturer's certificate to be submitted
460
-
-
... More
od107243/2023_2024 : Supply and installation of Work Stations (Open Office System) 1200mm X 600mm X 750mm ht non sharing type with table top made of 25mm thick Prelaminated particle board E1 grade conforming to IS:12823, edge finished with 2mm PVC edge banding, supported on under structure made of ERW CR Tube of appropriate size approx 16g thk powder coated with suitable levellers at either ends and connectors with appropriate sections provided in between the leg for support; mast leg/ central leg with vertical cable raiser and horizontal continuous power beam for integrated wire management, provision for fixing sockets, soft closing access flip boxes/grommet fitted on table top, MS perforated powder coated modesty panel of 350 mm ht at aisle and passage side, below power beam/raceway/wire tray MS powder coated Perforated Modesty of 300 mm ht etc complete as per directions of Engineer-in-charge (Warranty period: 5 years) Manufacturer's certificate to be submitted
110
-
-
... More
od107244/2023_2024 : Supply and installation of mobile pedestal of size 400mm (w) X 450mm (d) X 600 mm (h) with lockable castors made with 18mm thick Prelaminated particle board E1 grade conforming to IS:12823, edge finished with 2mm PVC edge banding, pedestal shall have two equal small drawers and one larger drawer for box files and with fixtures including finger groove handle, soft closing sliders, all drawers should be lockable type, locks with two keys, the sliders should have ball bearing to ensure smooth movement, all hardware of app. make etc. complete as per directions of Engineer-in-charge (Warranty period: 5 years) Manufacturer's certificate to be submitted
570
-
-
... More
od103937/2023_2024 : Supply and installation of privacy screens of size 1050 x 400 x 8 mm with laminated lacquered glass with bevelled edges and round corners of approved colour supported on brackets ; All hardware of approved make etc. complete as per directions of Engineer-in-charge
340
-
-
... More
od103938/2023_2024 : Supply and installation of Fabric privacy screens of size 1050 x 400 mm along main spine with pin-up band on top encased in aluminium extrusion (fabric of approved quality, fire retardant & colour) supported on brackets; All hardware of approved make etc. complete as per directions of Engineer-in-charge
340
-
-
... More
od991/2023_2024 : Supplying and placing in position premium quality Executive tables of approved make Main table of size 1500x600x750 mm, return table with storage unit of size 1200x450x750mm; pedestal of size 400x470x545mm. Table top made of 25 mm thick prelaminated particle board edges post formed/ 2mm PVC edge banding; table supported on loop leg under structure made of diamond shape ERW CR Tube of size 55x55x76mm x 16g thk powder coated with suitable levellers at either ends and connectors with 50X25 sections provided in between the leg for support; mast leg/ central leg with vertical cable raiser and power beam for integrated wire management, provision for fixing sockets, soft closing access flip boxes fitted on table top, levellers made of 100% recyclable nylon bolt, metal/ prelam board modesty of 450 mm height, mobile pedestal storage unit with three drawers, return storage unit with one adjustable rack and prelaminated particle board side hung shutter, along with all accessories such as handles, locks, soft closing hinges, sliders etc. complete as per directions of Engineer-in-charge (Warranty period: 5 years)
27
-
-
... More
od1011/2023_2024 : Supplying and placing in position 10 seater Conference table of size 3000x1200x750 mm of approved make and following specification: Table top made of 25mm thick Prelaminated particle board E1 grade conforming to IS:12823, edge finished with 2mm PVC edge banding, supported on loop leg under structure made of diamond shape ERW CR Tube of size 55x55x76mm x 16g thk powder coated with suitable levellers at either ends and connectors with 50X25 sections provided in between the leg for support; mast leg/ central leg with vertical cable raiser and power beam for integrated wire management, provision for fixing sockets, soft closing aluminium access pop up type flush mounting boxes 3 nos of 8 module fitted on table top along with required under table wire management system etc complete as per directions of Engineer-in-charge (Warranty period: 10 years ) Manufacturer's certificate to be submitted
2
-
-
... More
od1014/2023_2024 : Supplying and placing in position 4 seater Meeting table of size 900 mm dia x 750 mm ht of approved make and following specification: Table table top made of 25mm thick Prelaminated particle board E1 grade conforming to IS:12823, edge finished with 2mm PVC edge banding, supported on single leg under structure made of round shape powder coated ERW CR Tube of size 100 mm x 16g thk with disc base of suitable size with suitable levellers, soft closing aluminium access pop up type flush mounting boxes fitted on table top along with required under table wire management system etc complete as per directions of Engineer-in-charge (Warranty period: 10 years ) Manufacturer's certificate to be submitted
16
-
-
... More
od5412/2023_2024 : Supplying and placing in position Medium Back Chairs having good ergonomic seat design with synchronic tilt chair mechanism designed with 360 degree revolving type and upright locking and pneumatic height adjustments, 4 position locking, adjustable lumbar support, Back with injection moulded frame and inner frame upholstered with Mesh fabric and mounted on main assembly, push back type, seat pressed and moulded with PU foam 50 mm thick high density 50 kg/cum cushion upholstered with 100% polyester 290 gram GSM, fire retardant fabric of approved colour, adjustable swivel polypropylene Armrest, pedestal base glass fiber nylon 650 mm dia five pronged with twin wheel nylon castors 50 mm dia. The chair should have minimum dimensions of overall width 670mm, seat width 500 mm, seat depth 480 mm, back rest width 440 mm (tolerance 10 mm) etc as per directions of Engineer-in-charge The OEM should have certifications such as BIFMA, ISO, Green guard, AIOTA etc. Test reports from designated AHSP/NABL/ILAC accredited or Central Government Lab to prove conformity of products to the specifications to be furnished if required. Basic cost considered - Rs.5,000.00 (Warranty period: 5 years )
704
-
-
... More
od5413/2023_2024 : Supplying and placing in position High Back Chairs having good ergonomic seat design with synchronic tilt chair mechanism designed with 360 degree revolving type and upright locking and pneumatic height adjustments, 4 position locking, adjustable lumbar support, Back with injection moulded frame and inner frame upholstered with Mesh fabric and mounted on main assembly, push back type, seat pressed and moulded with PU foam 50 mm thick high density 50 kg/cum cushion upholstered with 100% polyester 290 gram GSM, fire retardant fabric of approved colour, adjustable swivel polypropylene Armrest, adjustable head rest, pedestal base glass fiber nylon 650 mm dia five pronged with twin wheel nylon castors 50 mm dia. The chair should have minimum dimensions of overall width 750mm, seat width 500 mm, seat depth 480 mm, back rest width 440 mm (tolerance 10 mm) etc as per directions of Engineer-in-charge The OEM should have certifications such as BIFMA, ISO, Green guard, AIOTA etc. Test reports from designated AHSP/NABL/ILAC accredited or Central Government Lab to prove conformity of products to the specifications to be furnished if required. Basic cost considered - Rs.10,000.00 (Warranty period: 5 years )
51
-
-
... More
od1056/2023_2024 : Supplying and placing in position Two seater Sofa of approved make and of size 1375mm (L) x 750mm (D)x820 mm (H), with fully upholstered arm panels, seat and back, sofa finished with fine quality leatherette material 650 gsm of approved colour, structure with silver/pine wood, 32 & 40 density foam covered with roll poly filling for giving comfort and extra softness, elastic webbing, supported on stainless steel 316 grade legs as per directions of Engineer-in-charge (Warranty period: 10 years Manufacturer's certificate to be submitted) Model: Converse (Featherlite) or similar models of other approved makes
6
-
-
... More
od1058/2023_2024 : Supplying and placing in position Single seater Sofa of approved make and of size 875mm (L) x 750mm (D)x820 mm (H), with fully upholstered arm panels, seat and back, sofa finished with fine quality leatherette material 650 gsm of approved colour, structure with silver/pine wood, 32 & 40 density foam covered with roll poly filling for giving comfort and extra softness, elastic webbing, supported on stainless steel 316 grade legs as per directions of Engineer-in-charge (Warranty period: 10 years Manufacturer's certificate to be submitted) Model: Converse (Featherlite) or similar models of other approved makes
9
-
-
... More
od1063/2023_2024 : Supply and installation of Lounge soft seating Single seater with Leatherette Upholstered seat, seat with PU foam having density 32 kg/m3 +/-2%, poly fiber cushion material, covered with 650 GSM leatherette fabric of colour as approved by Engineer-in-charge, supported on four pronged aluminium base (model: Clara/Costa Featherlite make or equivalent) (Warranty - 10 years Manufacturer's certificate to be submitted)
6
-
-
... More
od1065/2023_2024 : Supply and installation of Pouffe seat Cube shape of size H 38.5 x W 41 x D 39 cm made with wooden legs melamine polished and leatherette upholstered seat, seat with PU foam having density 32 kg/m3 +/-2%, covered with 650 GSM leatherette fabric of colour as approved by Engineer-in-charge,
4
-
-
... More
od1066/2023_2024 : Supply and installation of Ottoman seating stool type of size H 45.7 x W 48.3 x D 48.3 cm made with wooden legs melamine polished and leatherette upholstered seat, seat with PU foam having density 32 kg/m3 +/-2% with webbing belt suspension system, poly fiber cushion material, covered with 650 GSM leatherette fabric of colour as approved by Engineer-in-charge,
8
-
-
... More
od1067/2023_2024 : Supply and installation of Ottoman seating bench type of size H 45.7 x W 121.9 x D 48.3 cm made with wooden legs melamine polished and leatherette upholstered seat, seat with PU foam having density 32 kg/m3 +/-2% with webbing belt suspension system, poly fiber cushion material, covered with 650 GSM leatherette fabric of colour as approved by Engineer-in-charge,
8
-
-
... More
od1068/2023_2024 : Supplying and fixing modular storage units 450 mm deep and of varying size of approved make. made of 18 mm thick both sides prelaminated particle board for verticals, horizontals and intermediate shelves. The height shall be divided into 2 compartments - lower unit upto 2100mm height, and the upper unit as loft storage upto bottom of false ceiling level. The openable door shutters shall be maximum 450 mm wide and provided with SS handles, locks, auto closing hinges, necessary hardware's etc; complete. The exposed edges shall be finished with 2mm thick PVC lipping etc as per directions of Engineer-in-charge. The face area shall be measured for payment. (Warranty period: 10 years and Manufacturer shall submit warranty certificate)
59.4
-
-
... More
od1070/2023_2024 : Supply and installation of Pantry Chairs stackable type with Polypropylene seat and back and four point stainless steel legs as per directions of Engineer-in-charge (Warranty period: 5 years
80
-
-
... More
PLUMBING AND SANITARY
-
-
-
... More
od929/2023_2024 : Providing and fixing glazed washbasin with integrated half pedestal 560x470x390 mm size of approved make and colour along with CP fittings of approved make such as 15mm CP brass pressmatic pillar cock , 15mm CP brass angular stop cock, 32mm dia CP brass waste coupling with popup, 32mm dia CP brass bottle trap with extension pipe including necessary supporting brackets, connection tube etc; complete. The supporting brackets, bolt and nuts to be supplied by the contractor. Works including cutting and making good the walls /floor wherever required, including conveyance of all materials to the site, all labour charges, all taxes etc; complete.
24
-
-
... More
od143337/2023_2024 : Supplying, installing, testing and commissioning of glazed under counter wash basin (Hindware make model Garnet cat. no. 10080 or equivalent), with pressmatic pillar cock (Jaquar make model no. PRS-031L65 or equivalent) , CP waste with overflow (pop-up), 32mm dia CP bottle trap with extension pipe, supporting CI bracket to support basin, 1 No. 15mm CP angle valve with 450mm long CP connection pipe and CP wall flanges, all complete set of approved make. <br>
1
-
-
... More
od938/2023_2024 : Providing, fixing, testing and commissioning of white vitreous china glazed wall mounted water closet (European type) of approved make with concealed cistern and flushing plate with necessary water connection with integrated angle stop valve production cover for service opening to be cut to the length, WC outlet bend, WC connection set dia 90mm, 2 threaded rods M12 for ceramics fastening,4adjustable fastening brackets, with fastening materials, with actuator plate, complete and the EWC shall be with necessary check nut, stopcock etc., seat and lid, CP brass hinges and rubber buffers, Concealed flushing cistern with fittings supporting bolt /CI / MS brackets. etc. cutting and making good the walls and floors wherever required all complete as per specification and direction of the Engineer-in-charge
35
-
-
... More
od941/2023_2024 : Providing and fixing white vitreous urinal of approx. size 280x345x690mm with inlet from back side and pressmatic auto closing concealed urinal flush valve with wall flange, with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required, fixing to wall with suitable brackets all as per manufacturers specification and as per directions of Engineer-in-charge
14
-
-
... More
od946/2023_2024 : Providing and fixing Stainless Steel A ISI 304 (18/8) Kitchen sink with drain board 510x1040 mm bowl depth 250 mm as per IS 13983 with C.I. brackets , 40 mm C.P brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required, grouting the joints etc complete as per directions of Engineer-in-charge
1
-
-
... More
od961/2023_2024 : Supplying and fixing CP Sink cock with angular knob and swinging spout and wall flange wall mounted model including cost of all materials, accessories and labour charges etc complete as per the direction of Engineer-in-charge.
1
-
-
... More
18.51.1 : Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore
8
-
-
... More
18.52.1 : Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 893115 mm nominal bore
14
-
-
... More
18.53.1 : Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore
14
-
-
... More
od983/2023_2024 : Supplying and fixing CP Health Faucet and angle cock with wall flange of superior quality ( Jaguar or equivalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
35
-
-
... More
od988/2023_2024 : Providing and fixing CP Brass toilet paper holder with flap guard of superior quality (Jaguar or equivalent make) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
35
-
-
... More
od994/2023_2024 : Providing and fixing Stainless steel towel ring trapezoidal/round shape with concealed fittings arrangement of approved quality Jaguar make or equivalent including cost of materials and labour charges etc complete as per the direction of Engineer-in-charge.
10
-
-
... More
od998/2023_2024 : Providing and fixing Stainless steel Towel rod 600 mm long or nearest available length Jaquar make or equivalent complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality including cost of materials and labour charges etc complete as per the direction of Engineer-in-charge.
10
-
-
... More
od1017/2023_2024 : Supplying and fixing CP Robe hook Jaquar make or equivalent including cost of materials and labour charges etc complete as per the direction of Engineer-in-charge.
6
-
-
... More
od1035/2023_2024 : Providing and fixing Stainless steel satin finish wall mounted Paper Towel Dispenser for 400-600 C/Z towels of approved make (Jaguar or equivalent make) including fixing in position as per directions of Engineer-in-charge
4
-
-
... More
od1041/2023_2024 : Providing and fixing wall mounted Stainless steel touch free infrared Hand dryer with 1150W rated power and carbon brush motor (Jaquar make or equivalent) including fixing in position as per directions of Engineer-in-charge
2
-
-
... More
od1046/2023_2024 : Providing and fixing wall mounted Aluminium/ABS material Automatic Soap Dispenser 0.8 l capacity (Jaquar make or equivalent) including fixing in position as per directions of Engineer-in-charge
8
-
-
... More
18.7.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall20 mm nominal outer dia pipes
10
-
-
... More
18.7.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall25 mm nominal outer dia pipes
66
-
-
... More
18.7.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall32 mm nominal outer dia pipes
25
-
-
... More
18.7.5 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall40 mm nominal outer dia pipes
30
-
-
... More
18.8.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes
235
-
-
... More
18.8.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes
40
-
-
... More
18.8.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.32 mm nominal outer dia pipes
10
-
-
... More
18.17.1 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore
6
-
-
... More
18.17.2 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore
6
-
-
... More
18.17.3 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore
6
-
-
... More
18.18.2 : Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:20 mm nominal bore
6
-
-
... More
18.18.3 : Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:25 mm nominal bore
8
-
-
... More
od1078/2023_2024 : Providing, fixing and testing of approved make of 40 mm dia SWR - B- Class PVC pipes and fittings confirming to IS 13592-1992. and fittings (available fittings in market and fabricated fittings ) such as tee, elbow, 'y' , coupler, etc. conforming to 14735 with latest amendment for soil and waste pipe works in toilets and utility area,etc. Pipes shall be laid in vertical stack and sunken in floors as per approved drawings with proper alignment and gradient as per the drawings with proper split clamp,anchor fastener and 10 mm thread rod supports. Wall cutting shall be done using wall cutting machine, and chasing to be done using electric jack hammer machine. Cutting and chasing with hammer shall not be permitted. Pipes and fittings shall be cleaned with pipe cleaners and joined by approved approved make solvent cement. After laying the pipes, before closing the pipes, gravity test to be conducted and get the approval from the Engineer-in-charge. Chased portions shall be covered with cement mortar. Work includes making required size holes in brick walls wherever necessary and re do same with water proofing components to the entire satisfaction of Engineer-in-charge.etc complete. All the stub outs shall be closed with proper end caps till of installation of sanitary wares and accessories etc. complete.
50
-
-
... More
od1079/2023_2024 : Providing, fixing and testing of approved make of 50 mm dia SWR - B- Class PVC pipes and fittings confirming to IS 13592-1992. and fittings (available fittings in market and fabricated fittings ) such as tee, elbow, 'y' , coupler, etc. conforming to 14735 with latest amendment for soil and waste pipe works in toilets and utility area,etc. Pipes shall be laid in vertical stack and sunken in floors as per approved drawings with proper alignment and gradient as per the drawings with proper split clamp,anchor fastener and 10 mm thread rod supports. Wall cutting shall be done using wall cutting machine, and chasing to be done using electric jack hammer machine. Cutting and chasing with hammer shall not be permitted. Pipes and fittings shall be cleaned with pipe cleaners and joined by approved approved make solvent cement. After laying the pipes, before closing the pipes, gravity test to be conducted and get the approval from the Engineer-in-charge. Chased portions shall be covered with cement mortar. Work includes making required size holes in brick walls wherever necessary and re do same with water proofing components to the entire satisfaction of Engineer-in-charge.etc complete. All the stub outs shall be closed with proper end caps till of installation of sanitary wares and accessories etc. complete.
55
-
-
... More
od1081/2023_2024 : Providing, fixing and testing of approved make of 75 mm dia SWR - B- Class PVC pipes and fittings confirming to IS 13592-1992. and fittings (available fittings in market and fabricated fittings ) such as tee, elbow, 'y' , coupler, etc. conforming to 14735 with latest amendment for soil and waste pipe works in toilets and utility area,etc. Pipes shall be laid in vertical stack and sunken in floors as per approved drawings with proper alignment and gradient as per the drawings with proper split clamp,anchor fastener and 10 mm thread rod supports. Wall cutting shall be done using wall cutting machine, and chasing to be done using electric jack hammer machine. Cutting and chasing with hammer shall not be permitted. Pipes and fittings shall be cleaned with pipe cleaners and joined by approved approved make solvent cement. After laying the pipes, before closing the pipes, gravity test to be conducted and get the approval from the Engineer-in-charge. Chased portions shall be covered with cement mortar. Work includes making required size holes in brick walls wherever necessary and re do same with water proofing components to the entire satisfaction of Engineer-in-charge.etc complete. All the stub outs shall be closed with proper end caps till of installation of sanitary wares and accessories etc. complete.
180
-
-
... More
od1082/2023_2024 : Providing, fixing and testing of approved make of 110 mm dia SWR - B- Class PVC pipes and fittings confirming to IS 13592-1992. and fittings (available fittings in market and fabricated fittings ) such as tee, elbow, 'y' , coupler, etc. conforming to 14735 with latest amendment for soil and waste pipe works in toilets and utility area,etc. Pipes shall be laid in vertical stack and sunken in floors as per approved drawings with proper alignment and gradient as per the drawings with proper split clamp,anchor fastener and 10 mm thread rod supports. Wall cutting shall be done using wall cutting machine, and chasing to be done using electric jack hammer machine. Cutting and chasing with hammer shall not be permitted. Pipes and fittings shall be cleaned with pipe cleaners and joined by approved approved make solvent cement. After laying the pipes, before closing the pipes, gravity test to be conducted and get the approval from the Engineer-in-charge. Chased portions shall be covered with cement mortar. Work includes making required size holes in brick walls wherever necessary and re do same with water proofing components to the entire satisfaction of Engineer-in-charge.etc complete. All the stub outs shall be closed with proper end caps till of installation of sanitary wares and accessories etc. complete.
120
-
-
... More
od1087/2023_2024 : Providing and fixing PVC floor trap of self cleansing design and CP Anti cockroach floor trap consisting of floor drain hinged grating, inner filter, out filter, rim etc complete, fixed over the floor trap. Work includes cleaning of floor traps before fixing the gratings. While fixing the gratings, flooring should be cut to required size of grating, (not more than 2mm of the grating sizes) using tile cutter etc; complete. The gap should be filled silicon sealant/epoxy grout to match the flooring colour. The colour and shape of the gratings shall be as per the approval from the Engineer-in-charge. To avoid damage of the CP gratings, acid cleaning of flooring shall be done before fixing of gratings.
45
-
-
... More
od1089/2023_2024 : Providing and fixing Stainless Steel AISI 304(18/8) Floor Cleanout dummy/inactive Drain Cover fixed with SS screws suitable for drain pipe size 4" etc complete as per directsions of Engineer-in-charge. While fixing the gratings, flooring should be cut to required size of grating, (not more than 2mm of the grating sizes) using tile cutter etc; complete. The gap should be filled with epoxy grout/silicon sealant to match the flooring color. The color and shape of the gratings shall be as per approval from the Engineer-in-charge. To avoid damage of the cleanout, cleaning of flooring shall be done before fixing of cleanout.
40
-
-
... More
od1090/2023_2024 : Making connection of drain or sewer line with existing lines including breaking into and making good the walls, floors with cement concrete 1:2:4 mix( 1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete as per directions of Engineer-in-charge
18
-
-
... More
od132498/2023_2024 : Providing and fixing Reception table made to shape and design as per drawing, of size 1800 x 600 mm and to a height of 750 / 1050 mm, made of 19 mm thick BWP plywood as table top, sides and rear side with adequate supports as directed in both horizontal and vertical directions. The table top to be fixed with Solid Acrylic surface of approved make 12mm thick. The front surface to be provided with 6mm thick Solid Acrylic surface of approved make and 6mm lacquered glass of approved make fixed with 3M double-side tape as per the drawing as per the drawing. All other exposed surfaces of the table shall be finished with 1mm thick laminate of approved make and shade and edges . The table shall be provided with modular mobile pedestal storage unit (3 drawer) of size 450x400x600 mm made out of 18mm thick prelaminated board with locks, telescopic slides, finger groove handle/SS "H' Handles, lockable castors, etc. Table to be provided with accessories such as fliptop box for wire management, LED strip lights in Al profile as required in the projections as shown in drawing, powder-coated metal CPU trolley, keyboard tray of approved make, , etc. complete and as per directions of Engineer-in-charge.
16
-
-
... More
od132501/2023_2024 : Supply, fabrication and installation of Dining Table of size 1200x 800x 750 mm made with under structure of Stainless Steel 304 grade 16 gauge tubes of size 50x25mm (main frame)/25x25mm (connectors) and plates, table top with 15mm thick full body vitrified tile slab of size 2400x800 mm conforming to IS:15622 and of approved make, colour and shade, pasted over PVC sheet/panel 12 mm thick fixed to the SS under structure with required accessories, screws, clamps, adhesive etc complete. The edges of table top to be finished to provide a 30 mm thick edge by gluing 4 cm wide 15 mm thick vitrified tile slab and edges bull nosed, polished to achieve glossy finish. The quoted rate shall include the cost of all materials and labours, tools and tackles etc complete and as per directions of Engineer-in-charge.
20
-
-
... More
od142458/2023_2024 : Providing & Fixing Cafeteria / Pantry counter with storage as per Drg., in general, the storage shall be of 600mm depth and 850 mm height. The cabinets & shutters shall be FACTORY-FINISHED and comprising of counter top with 15mm thick full body vitrified counter slab fixed using suitable adhesive and to include 40x15mm end beading along the outer perimeter of the counter-top. The beading shall have R-5 corner edges along the top and bottom edges. Counter top to be fixed over support shelf made out of 18 mm thick PVC panel finished with 1.0 mm thick laminate of approved colour and shade with 2mm edge lipping finish for exposed edges, shelf to have openable shutters made out of 18mm thick PVC panel finished with 1 mm thick laminate of approved colour and shade with 2mm edge lipping finish for exposed edges with necessary accessories such as soft close hinges, 100mm long brush finish S.S.handles, locks, magnetic catches. Rate to include cutting of counter-top for accomodating the S.S sink and CP fittings and fixing the end beading to the cut-perimeter to neat finish. All the surfaces shall be finished with laminate etc complete as per directions of Engineer-in-charge Note: Only the Front Elevation area shall be considered for Measurement.
2.55
-
-
... More
od142460/2023_2024 : Supply and installation of Storage units with hinged shutters as per drawing made out of 18 mm thick Pre- laminated flat pressed 3 layer ( medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, with screws and fittings wherever required of approved colour and shade with 2mm edge lipping finish on exposed edges along with necessary accessories such as brush finish S.S.handles, locks, aluminium shutter grill 450 mm long for ventilation, etc complete as per directions of Engineer-in-charge
53.55
-
-
... More
od135007/2023_2024 : Providing and fixing display shelf made with MS frames and WPC boards of size 1.20 m long x 0.30 m wide x 1.20 m high as per the pattern in the drawings using factory made 18 mm thick single extruded WPC (Wood Polymer Composite) boards comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/moisture proof and fire retardant, shelf to have boxes made of WPC boards laminated with PVC foil of minimum 14 microns thickness of approved design pasted with hot melt adhesive for placing plants, display shelves of approved design by Engineer-in -charge and fixing on M.S (mild steel) frame made of 25 x 25 x 1.5 mm square hollow box section including applying a priming coat of approved steel primer and two coats of synthetic enamel paint; shelves and planter boxes to be fixed in the MS framework as per requirement/ pattern with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In- Charge.
49
-
-
... More
od136564/2023_2024 : Providing custom made lounge seating. The Structure will be made in solid wood and plywood wherever required. The structure shall have copper spring base with elastic belts with foam / jute covering on top The seat shall have 32 density foam of 4 1/2" thick with fabric covering in velvet Finish and or leatherite as per room decor. The body will have full fabric covering in velvet / leatherite fabric with back cushions in fiber/foam. The size will be with seating width of 32" each and sofa outer depth will be 32". The wood shall be fully treated and seasoned solid wood Sheesham. The sofa will be Single seater sofa.
10
-
-
... More
od136565/2023_2024 : Providing custom made lounge seating. The Structure will be made in solid wood and plywood wherever required. The structure shall have copper spring base with elastic belts with foam / jute covering on top The seat shall have 32 density foam of 4 1/2" thick with fabric covering in velvet Finish and or leatherite as per room decor. The body will have full fabric covering in velvet / leatherite fabric with back cushions in fiber/foam. The size will be 54" with seating width of 22" each and sofa outer depth will be 32". The wood shall be fully treated and seasoned solid wood Sheesham. The sofa will be Two seater sofa.
10
-
-
... More
od136700/2023_2024 : Supply, fabrication and installation of Side Table of size 450x450x600 mm made with under structure of Stainless Steel 304 grade 16 gauge tubes of size 20x20mm, table top with 15mm thick full body vitrified tiles fixed to the SS under structure with required accessories, screws, clamps, adhesive etc complete. The edge of the vitrified tile slab table top bull nosed. The quoted rate shall includes the cost of all materials and labours, tools and tackles etc .
27
-
-
... More
od136701/2023_2024 : Supply, fabrication and installation of Centre Table of size 1050x500x450 mm made with under structure of Stainless Steel 304 grade 16 gauge tubes of size 20x20mm, table top with 15mm thick full body vitrified tiles fixed to the SS under structure with required accessories, screws, clamps, adhesive etc complete. The edge of the vitrified tile slab table top bull nosed. The quoted rate shall includes the cost of all materials and labours, tools and tackles etc .
5
-
-
... More
od142454/2023_2024 : Supply and fixing of Aluminium Glazed Stile door with Kubik / Dormakaba Atlterra system make or equivalent brand with 12mm toughened glass. Aluminium stile to be formed out of 70x35 mm horizontal and vertical door profile frame with clips and seals with intermediate stick on profiles as provided in glazed partition. The Stile profiles and hardware shall be matt black anodized finish. Required door hardwares such as 4 nos of flush hinges of required size with screws and in black finish, cam action concealed door closer with hold open unit, half moon door stopper, square shaped black pull handle and narrow stile dead lock package are to provided and fixed along with necessary seals all around the door frame. The profile manufacturer to supply all the necessary clips, seals and fixing accessories for the system etc complete. All Profiles to be approx. 2 mm Gauge thickness excluding 20 Micron of Anodizing. The work shall be undertaken as per approval and directions of Engineer-in-charge
68.4
-
-
... More
od142455/2023_2024 : Supply and fixing of Timber/flush door of approx. 40 mm thickness in single glazed partition system with shutters conforming to IS:2202 (Part1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters and finished with 1.00 mm thick stain finish decorative laminate sheet of approved shade and brand, providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of the shutter and finishing with melamine polish, vision panel with 8 mm thick bevelled glass with required lipping and with required hardware such as flush hinges (3 or 4 nos), square pull handles 600 mm long in matching shade to glazed partition profiles, dead lock package, concealed cam action door closer with hold open unit, necessary seals, clips and all fixing accessories for the complete system etc complete as per directions of Engineer-in-charge
76.8
-
-
... More
od2662/2023_2024 : ATS PANEL, -1 Design, Manufacture, Supply, Installation, Testing, Commissioning and Earthing of the Floor panel with necessary base frame , cubicle type, made out of 1.6mm thick CRCA sheet, totally enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalized, suitable for operation on 3 phase , 415 V, 50Hz AC system. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and<br>IP classification) . Incoming and outgoing breaker details as mentioned below 6 NOS -40 A 4POLE and 1 Nos 63 A 4 pole ATS panel with advanced neutral. Automatic/Manual with inbuilt Time delay (with Primary Protection against Single phasing- Over Voltage, Under Voltage Aux Contactor +Add on Block each 2set of RYB Indication Lamp and Power and control terminal Terminal block
1
-
-
... More
od2670/2023_2024 : ATS PANEL - 2 Design, Manufacture, Supply, Installation, Testing, Commissioning and Earthing of the Floor panel with necessary base frame , cubicle type, made out of 1.6mm thick CRCA sheet, totally enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalized, suitable for operation on 3 phase , 415 V, 50Hz AC system. The panel shall be fabricated from a firmhaving CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and<br>IP classification) . Incoming and outgoing breaker details as mentioned below 7 NOS -40 A 4POLE and 1 Nos 63 A 4 pole ATS panel with advanced neutral. Automatic/Manual with inbuilt Time delay (with Primary Protection against Single phasing- Over Voltage, Under Voltage Aux Contactor +Add on Block each 2set of RYB Indication Lamp and Power and control terminal Terminal block
1
-
-
... More
od2671/2023_2024 : ATS PANEL 3 Design, Manufacture, Supply, Installation, Testing, Commissioning and Earthing of the Floor panel with necessary base frame , cubicle type, made out of 1.6mm thick CRCA sheet, totally enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalized, suitable for operation on 3 phase , 415 V, 50Hz AC system. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) . Incoming and outgoing breaker details as mentioned below. 5 NOS -40 A 4POLE and 2 NOS 63 A 4 pole ATS panel with advanced neutral Automatic/Manual with inbuilt Time delay(with Primary Protection against Single phasing- Over Voltage, Under Voltage Aux Contactor +Add on Block each 2set of RYB Indication Lamp and Power and control terminal Terminal block
1
-
-
... More
od2677/2023_2024
DG PANEL, -1 Design, Manufacture, Supply, Installation, Testing, Commissioning and Earthing of the
Floor panel with necessary base frame , cubicle type, made out of 1.6mm thick CRCA sheet, totally
enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalized, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc. The panel shall be
fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise andbrIP classification) . All breaker should provide free potential contact for status monitoring through BMS for ON/OF and trip status separate compartment. MCCB shall have inbuilt shunt trip coil. All the meter should have RS 485 Modbus output for BMS integration. INCOMER:-1 No and 120A 4P 16 KA MCCB,1 Set and 120/5A CT CL 0.5.0 15VA for metering,1 No. Tested energy meter with RS485 port, With sealing provision ,3 Sets and LED type RYB indication lamp with control MCBs,3 Sets and LED type ON, OFF ,TRIP indication lamp with control MCBs. OUTGOING:- 6Nos -40 TP+N 16KA, 1Nos -63A TP+N 16KA MCCB with Tested energy meter with RS485 port, suitable CTs Class .5s with sealing provision for meters, each with 1 Sets LED type RYB indication lamp with control MCBs, ON,OFF,TRIP.BUS BAR RATING: One set: 300A TPN 25KA for 1 sec. Aluminum bus bars with colour coated heat shrinkable PVC sleeves with DMC/SMC bus bar supports and suitable earth bus, PH: 1R 40 x 10mm Al.Flat,N:1R 20 x10mm Al. Flat, Earth:1R 25 x 3mm Cu. Flat.
1
-
-
... More
DG PANEL -2 Design, Manufacture, Supply, Installation, Testing, Commissioning and Earthing of the
Floor panel with necessary base frame , cubicle type, made out of 1.6mm thick CRCA sheet, totally
enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalized, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc. The panel shall be
fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise andbrIP classification) . All breaker should provide free potential contact for status monitoring through BMS for ON/OF and trip status separate compartment. MCCB shall have inbuilt shunt trip coil. All the meter should have RS 485 Modbus output for BMS integration. INCOMER:-1 No and 120A 4P 16 KA MCCB,1 Set and 120/5A CT CL 0.5.0 15VA for metering,1 No. Tested energy meter with RS485 port, With sealing provision ,3 Sets and LED type RYB indication lamp with control MCBs,3 Sets and LED type ON, OFF ,TRIP indication lamp with control MCBs. OUTGOING :- 7Nos -40A TP+N 16KA, 1Nos -63A TP+N 16KA MCCB with Tested energy meter with RS485 port, suitable CTs Class .5s with sealing provision for meters, each with 1 Sets LED type RYB indication lamp with control MCBs, ON,OFF,TRIP.BUS BAR RATING: One set: 300A TPN 25KA for 1 sec. Aluminum bus bars with colour coated heat shrinkable PVC sleeves with DMC/SMC bus bar supports and suitable earth bus, PH: 1R 40 x 10mm Al.Flat,N:1R 20 x10mm Al. Flat, Earth:1R 25 x 3mm Cu. Flat.
1
-
-
... More
od2681/2023_2024
DG PANEL 3 Design, Manufacture, Supply, Installation, Testing, Commissioning and Earthing of the
Floor panel with necessary base frame , cubicle type, made out of 1.6mm thick CRCA sheet, totally
enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalized, suitable for
operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size
wires/cable, interconnection, duly powder coated with seven tank process etc. The panel shall be
fabricated from a firm having CPRI certification with test certificates for similar panel (required for short
circuit rating, temperature rise andbrIP classification) . All breaker should provide free potential contact
for status monitoring through BMS for ON/OF and trip status separate compartment. MCCB shall have
inbuilt shunt trip coil. All the meter should have RS 485 Modbus output for BMS integration.,INCOMER:-1
No – 120A 4P 16 KA MCCB,1 Set –120/5A CT CL 0.5.0 15VA for metering,1 No. Tested
energy meter with RS485 port, With sealing provision ,3 Sets LED type RYB indication lamp
with control MCBs,3 Sets and LED type ON, OFF ,TRIP indication lamp with control MCBs. OUTGOING -
5Nos -40A TP+N 25KA MCCB 2Nos -63A TP+N 25KA MCCB with tested energy meter with
RS485 port, suitable CTs Class .5 with sealing provision for meters, each with 1 Sets and LED type RYB
indication lamp with control MCBs, ON, OFF,TRIP.BUS BAR RATING-One set: 300A TPN 25KA for 1
sec. Aluminum bus bars with colour coated heat shrinkable PVC sleeves with DMC/SMC bus bar
supports and suitable earth bus, PH: 1R 40 x 10mm Al.Flat,N:1R 20 x10mm Al. Flat, Earth:1R 25 x 3mm
Cu. Flat.
1
-
-
... More
Od2685/2023_2024
EB PANEL1 Design, Manufacture, Supply, Installation, Testing, Commissioning and Earthing of the Floor
panel with necessary base frame , cubicle type, made out of 1.6mm thick CRCA sheet, totally enclosed ,
free standing, floor mounting, dust and vermin proof, indoor, compartmentalized, suitable for operation on
3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable,
interconnection, duly powder coated with seven tank process etc. The panel shall be fabricated from a
firmhaving CPRI certification with test certificates for similar panel (required for short circuit rating,
temperature rise andbrIP classification) . All breaker should provide free potential contact for status
monitoring through BMS for ON/OF and trip status separate compartment. MCCB shall have inbuilt shunt
trip coil. All the meter should have RS 485 Modbus output for BMS integration. INCOMER:-1 No 120A 4P
16KA MCCB with Over current and short circuit release,1 Set and 120/5A CT CL 0.5s 15VA for metering,
1 No. tested energy meter with RS485 port, With sealing provision ,3 Sets LED type RYB indication lamp with control MCBs, 3 Sets LED type ON, OFF ,TRIP indication lamp with control MCBs
OUTGOING -6Nos -40A TP+N 25KA MCCB, 1Nos -63A TP+N 25KA MCCB with Over current and short
circuit release with tested energy meter with RS485 port, suitable CTs Class .5s with sealing provision for meters, each with 1 Sets LED type RYB indication lamp with control MCBs,
ON,OFF,TRIP.BUS BAR RATING :One set: 300A TPN 25KA for 1 sec. Aluminum bus bars with colour
coated heat shrinkable PVC sleeves with DMC/SMC bus bar supports and suitable earth bus, PH: 1R 40
x 10mm Al.Flat,N:1R 20 x 10mm Al. Flat, Earth:1R 25 x 3mm Cu. Flat.
1
-
-
... More
od2699/2023_2024
EB PANEL 2 Design, Manufacture, Supply, Installation, Testing, Commissioning and Earthing of the
Floor panel with necessary base frame , cubicle type, made out of 1.6mm thick CRCA sheet, totally
enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalized, suitable for
operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size
wires/cable, interconnection, duly powder coated with seven tank process etc. The panel shall be
fabricated from a firmhaving CPRI certification with test certificates for similar panel (required for short
circuit rating, temperature rise andbrIP classification) . All breaker should provide free potential contact
for status monitoring through BMS for ON/OF and trip status separate compartment. MCCB shall have
inbuilt shunt trip coil. All the meter should have RS 485 Modbus output for BMS integration. INCOMER:-1
No 120A 4P 16KA MCCB with Over current and short circuit release,1 Set and 120/5A CT CL 0.5s 15VA
for metering, 1 No. tested energy meter with RS485 port, With sealing provision ,3 Sets LED type RYB indication lamp with control MCBs, 3 Sets LED type ON, OFF ,TRIP indication lamp with control
MCBs OUTGOING -7Nos -40A TP+N 16KA MCCB, 1Nos -63A TP+N 25KA MCCB with Over current and
short circuit release with tested energy meter with RS485 port, suitable CTs Class .5s with sealing provision for meters, each with 1 Sets LED type RYB indication lamp with control MCBs,
ON,OFF,TRIP.BUS BAR RATING :One set: 300A TPN 25KA for 1 sec. Aluminum bus bars with colour
coated heat shrinkable PVC sleeves with DMC/SMC bus bar supports and suitable earth bus, PH: 1R 40
x 10mm Al.Flat,N:1R 20 x 10mm Al. Flat, Earth:1R 25 x 3mm Cu. Flat.
1
-
-
... More
od4799/2023_2024
EB PANEL 3 Design, Manufacture, Supply, Installation, Testing, Commissioning and Earthing of the
Floor panel with necessary base frame , cubicle type, made out of 1.6mm thick CRCA sheet, totally
enclosed , free standing, floor mounting, dust and vermin proof, indoor, compartmentalized, suitable for
operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size
wires/cable, interconnection, duly powder coated with seven tank process etc. The panel shall be
fabricated from a firmhaving CPRI certification with test certificates for similar panel (required for short
circuit rating, temperature rise and IP classification) . All breaker should provide free potential contact for
status monitoring through BMS for ON/OF and trip status separate compartment. MCCB shall have inbuilt
shunt trip coil. All the meter should have RS 485 Modbus output for BMS integration. INCOMER:-1 No
120A 4P 16KA MCCB with Over current and short circuit release,1 Set and 120/5A CT CL 0.5s 15VA for
metering, 1 No. tested energy meter with RS485 port, With sealing provision ,3 Sets LED type RYB indication lamp with control MCBs, 3 Sets LED type ON, OFF ,TRIP indication lamp with control
MCBs OUTGOING -5Nos -40A TP+N 16KA MCCB, 2Nos -63A TP+N 25KA MCCB with Over current and
short circuit release with tested energy meter with RS485 port, suitable CTs Class .5s with
sealing provision for meters, each with 1 Sets LED type RYB indication lamp with control MCBs,
ON,OFF,TRIP.BUS BAR RATING :One set: 300A TPN 25KA for 1 sec. Aluminum bus bars with colour
coated heat shrinkable PVC sleeves with DMC/SMC bus bar supports and suitable earth bus, PH: 1R 40
x 10mm Al.Flat,N:1R 20 x 10mm Al. Flat, Earth:1R 25 x 3mm Cu. Flat.
1
-
-
... More
2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
200
-
-
... More
2.10.3 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole
22
-
-
... More
2.10.5 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole and neutral
144
-
-
... More
2.11 : Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
20
-
-
... More
2.12.1 : Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
2
-
-
... More
2.15.2 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
2
-
-
... More
2.15.3 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps
4
-
-
... More
2.21 : Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2
mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
2
-
-
... More
90.11.1.18 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required
18
-
-
... More
90.11.1.19 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required
3
-
-
... More
2.4.6 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)8 way (4+24), Double door
18
-
-
... More
2.4.4 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)4 way (4+12), Double door
6
-
-
... More
2.4.5 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 way (4+18), Double door
15
-
-
... More
od4800/2023_2024 : Supply, Installation, Testing and Commissioning of 40A DP MCB along with modulde front plate in GI anodized with enclosure
4
-
-
... More
od4801/2023_2024 : Supply, installation, testing and commissioning of the following MCCBs / MCBs / ISOLATORs / STARTERs of type-II coordination etc.in manufacturers sheet steel enclosures, IP 20 Protection, fixed on the concealed wall including all interconnections and accessories of 40A TPN Isolator (MCB type) with enclosure.
34
-
-
... More
od4802/2023_2024 : Supply, installation, testing and commissioning of the following MCCBs / MCBs / ISOLATORs / STARTERs of type-II coordination etc.in manufacturer sheet steel enclosures, IP 20 Protection, fixed on the concealed wall including all interconnections and accessories of 63A TPN Isolator (MCCB type) with enclosure
4
-
-
... More
90.6.5.4 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.
50
-
-
... More
90.6.5.12 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.
70
-
-
... More
90.6.5.14 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.
50
-
-
... More
90.12.6.29 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.
400
-
-
... More
90.12.6.41 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.
200
-
-
... More
90.12.6.42 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.
50
-
-
... More
90.12.7.28 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.
300
-
-
... More
90.12.7.34 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.
50
-
-
... More
90.12.41.5 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.
120
-
-
... More
90.12.41.32 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.
900
-
-
... More
90.12.41.33 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.
150
-
-
... More
90.12.41.34 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.
200
-
-
... More
90.12.41.35 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.
100
-
-
... More
od4803/2023_2024 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.<br>1 core 6.00 sq mm
50
-
-
... More
od99785/2023_2024 : Supplying and making end termination with brass compression gland and aluminium lugs for <br>following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV <br>grade as required.<br>4 X 120 sq. mm
12
-
-
... More
od99786/2023_2024 : Supply of 120 sqmm 4 core PVC/XLPE insulated armoured cable with aluminium conductors for working voltages up to and including 1100 volts conforming IS 1584/part I/1988 for PVC IS 7098 part I for XLPE
60
-
-
... More
9.1.21 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm)
120
-
-
... More
9.1.22 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm)
38
-
-
... More
9.1.27 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)
8
-
-
... More
9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)
2
-
-
... More
9.1.34 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm)
2
-
-
... More
od4804/2023_2024 : LT CABLE TERMINATION Supply erection, Termination of PVC insulated armoured / unarmoured cables up to 1100V grade and connection of leads including the supply of Aluminum/COPPER cable lugs but including cutting stripping of cable insulation, providing double compression type glands, terminals, and armour earthing ,crimping the lug on to the conductor, clamping of the cable-cores, marking with wire number ferrules, etc.with Gland hood to be provided at the cable end entering to the Main panel and including all labour and materials complete and as per specifications of this tender and directions of Engineer-in-charge. End Termination of Cable using jointing kits & accessories as recommended by cable/ kit manufacturer. 3C 4 Sq.mm. XLPE cu. Ar. Cable
26
-
-
... More
od4805/2023_2024 : LT CABLE TERMINATION Supply erection, Termination of PVC insulated armoured / unarmoured cables up to 1100V grade and connection of leads including the supply of Aluminum/COPPER cable lugs but including cutting stripping of cable insulation, providing double compression type glands, terminals, and armour earthing ,crimping the lug on to the conductor, clamping of the cable-cores, marking with wire number ferrules, etc.with Gland hood to be provided at the cable end entering to the Main panel and including all labour and materials complete and as per specifications of this tender and directions of Engineer-in-charge. End Termination of Cable using jointing kits & accessories as recommended by cable/ kit manufacturer. 3C 2.5 Sq.mm. XLPE cu. flexible. Cable
4
-
-
... More
od4806/2023_2024 : LT CABLE TERMINATION Supply erection, Termination of PVC insulated armoured / unarmoured cables up to 1100V grade and connection of leads including the supply of Aluminum/COPPER cable lugs but including cutting stripping of cable insulation, providing double compression type glands, terminals, and armour earthing ,crimping the lug on to the conductor, clamping of the cable-cores, marking with wire number ferrules, etc.with Gland hood to be provided at the cable end entering to the Main panel and including all labour and materials complete and as per specifications of this tender and directions of Engineer-in-charge. End Termination of Cable using jointing kits & accessories as recommended by cable/ kit manufacturer. 3C 6 Sq.mm. XLPE cu. flexible. Cable
2
-
-
... More
od4807/2023_2024 : LT CABLE TERMINATION Supply erection, Termination of PVC insulated armoured / unarmoured cables up to 1100V grade and connection of leads including the supply of Aluminum/COPPER cable lugs but including cutting stripping of cable insulation, providing double compression type glands, terminals, and armour earthing ,crimping the lug on to the conductor, clamping of the cable-cores, marking with wire number ferrules, etc.with Gland hood to be provided at the cable end entering to the Main panel and including all labour and materials complete and as per specifications of this tender and directions of Engineer-in-charge. End Termination of Cable using jointing kits & accessories as recommended by cable/ kit manufacturer. 2C 1.5 Sq.mm. XLPE cu. Flexible. Cable
2
-
-
... More
od4808/2023_2024 : LT CABLE TERMINATION Supply erection, Termination of PVC insulated armoured / unarmoured cables up to 1100V grade and connection of leads including the supply of Aluminum/COPPER cable lugs but including cutting stripping of cable insulation, providing double compression type glands, terminals, and armour earthing ,crimping the lug on to the conductor, clamping of the cable-cores, marking with wire number ferrules, etc.with Gland hood to be provided at the cable end entering to the Main panel and including all labour and materials complete and as per specifications of this tender and directions of Engineer-in-charge. End Termination of Cable using jointing kits & accessories as recommended by cable/ kit manufacturer. 4C 1.5 Sq.mm. XLPE cu. Flexible. Cable
2
-
-
... More
od4809/2023_2024 : LT CABLE TERMINATION Supply erection, Termination of PVC insulated armoured / unarmoured cables up to 1100V grade and connection of leads including the supply of Aluminum/COPPER cable lugs but including cutting stripping of cable insulation, providing double compression type glands, terminals, and armour earthing ,crimping the lug on to the conductor, clamping of the cable-cores, marking with wire number ferrules, etc.with Gland hood to be provided at the cable end entering to the Main panel and including all labour and materials complete and as per specifications of this tender and directions of Engineer-in-charge. End Termination of Cable using jointing kits & accessories as recommended by cable/ kit manufacturer. 1C 6 Sq.mm. XLPE cu. Flexible. Cable
26
-
-
... More
od375478/2022_2023 : WIRING - CIRCUIT CUM POINT WIRING The rates for all point wiring items shall also include supplying and fixing of the Conduits, conduit specials, bushes and other fittings,Approved GI saddles and grouting the same for exposed conduit work,2 mm thick Outlet boxes and junction box,All fixing accessories such as clips, brass screws etc,All work materials necessary for wiring a point circuit of any length from the Final Distribution Board to connector via switch and shall include the circuit wiring also except where identified. Primary Light / Fan Point Wiring: Supply, wiring, connecting commissioning of 3Runs 2.5 Sq.mm. (Ph, Neutral & Earth) PVC insulated multistranded FRLS copper wires in 1.8mm thick MS conduits fixed on ceiling partly and 1.8 mm thick PVC conduit concealed in the wall partly with necessary clamps, screws, etc., as required as per the site condition including supplying and fixing of modular 6A One way switch along with moulded front plate in GI anodised manufacturer's mounting box fixed flush with the wall complete with all accessories including 3 plate ceiling rose.NOTE: Above false ceiling when it is open wiring it should be of MS conduit and for Vertical and horizontal drops concealed PVC conduits can be used. Accordingly the length of the conduit can be calculated.
500
-
-
... More
od375512/2022_2023 : WIRING - CIRCUIT CUM POINT WIRING.The rates for all point wiring items shall also include supplying and fixing of the Conduits, conduit specials, bushes and other fittings,Approved GI saddles and grouting the same for exposed conduit work,2 mm thick Outlet boxes and junction box,All fixing accessories such as clips, brass screws etc,All work materials necessary for wiring a point circuit of any length from the Final Distribution Board to connector via switch and shall include the circuit wiring also except where identified. Secondary Light Points: The secondary light points will have to be wired from the primary light point as mentioned above.
200
-
-
... More
1.7.2 : Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required2X2.5 sq.mm+1X2.5 sq.mm earth wire
6000
-
-
... More
od378063/2022_2023 : Supply Laying of 2R 2.5sqmm and 1R 2.5 Sq.mm. PVC insulated copper conductor single coble in suface /recessed conduit or Raceways all accessories as reqd as per the direction of engineer in charge. (From DB to 6A Switch & Sockets)
13500
-
-
... More
1.7.1 : Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
50
-
-
... More
1.7.3 : Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required2x4 sq.mm + 1x4 sq.mm earth wire
2000
-
-
... More
1.17.1 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.1 x 1.5 sq. mm
50
-
-
... More
1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
5000
-
-
... More
1.21.3 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm
300
-
-
... More
1.21.5 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.50 mm
200
-
-
... More
od378142/2022_2023 : Supply, Installation, testing and commissioning of 1 no 6/16A universal switched socket and with moulded front plate GI anodised enclosure in the wall/floor(concealed/open and other associated accessories including chasing embedding rough plastering as required as per the site conditions for power points as per the direction of engineer inchrage
93
-
-
... More
1.56 : Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light plugs to be used in non residential buildings).
692
-
-
... More
1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch
638
-
-
... More
1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet
638
-
-
... More
od4810/2023_2024 : Providing and fixing 4.00 mm dia (8SWG) copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
1500
-
-
... More
od4811/2023_2024 : Providing and fixing 25 mm X 6 mm copper strip on surface or in recess for connections etc. as required.
10
-
-
... More
od4812/2023_2024 : Providing and fixing 25 mm X 3 mm copper strip on surface or in recess for connections etc. as required (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
1000
-
-
... More
od4813/2023_2024 : Providing and fixing 10SWG copper wire on surface or in recess for loop earthing as required. For gland earthing
500
-
-
... More
4.1.2 : Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.150 mm width X 50 mm depth X 1.6 mm thickness
300
-
-
... More
4.1.3 : Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.225 mm width X 50 mm depth X 1.6 mm thickness
250
-
-
... More
4.1.4 : Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.300 mm width X 50 mm depth X 1.6 mm thickness
350
-
-
... More
4.1.6 : Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.450 mm width X50 mm depth X 2.0 mm thickness
400
-
-
... More
4.1.7 : Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.600 mm width X 50 mm depth X 2.0 mm thickness
300
-
-
... More
od4858/2023_2024 : Supply installation testing and commissioning of 10W ,Luminaire lumen ≥ 1000 lumens (100 lm/W),IP20, High efficient LED batten surface/wall mounted Specially designed extruded Aluminium housing with PC diffuser. In-built electronic driver duly wired up to terminal block.LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. Luminaire manufacturer shall produce certificate of association with LED manufacturer for minimum five years. The LED shall be compliant with LM80-08 standard with Useful L70 life of 50000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing) CRI >80, CCT - 6500K, Constant Current operated driver with range 150-270V AC Temperature range-0 to 45DegC, Driver efficiency>85%, Power factor>0.95, THD<10%, Surge protection 2kV, 50000 burning hours as per L70 Criteria, and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Wipro LL20-111-XXX-65AL1 or Equivelent approved make
26
-
-
... More
od4859/2023_2024 : Supply installation testing and commissioning of Supply of Integral, SMD LED, IP40, 40W Surface/Suspended Mounted LED Batten with System efficacy of more than 110 lm/W. LED luminaire shall have sleek designwith Extruded Aluminum Section. The luminaire shall have High Optically Efficient Polycarbonate Diffuser for Uniform illumination and wider light distribution. Screwless Design ensures ease of maintenance. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. Luminaire manufacturer shall produce certificate of association with LED manufacturer for minimum five years. The LED shall be compliant with LM80-08 standard with Useful L70 life of 50000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The LEDs used should be with CCT of 5700 K and CRI of Minimum 80. LED Driver shall be Isolated type, Constant Current topology driver with proper heat sink for heat dissipation suitable to operate in input voltage range of 150V to 270V (nominal rated voltage – 240V) with 3 KV internal surge protection, Power factor greater than 0.95 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire.Wipro Optima LL24-541-XXX-57-CD or Equivelent approved make
48
-
-
... More
od4860/2023_2024 : Supply installation testing and commissioning of Supply of IP20,9W, with system efficacy 100 Lm/w, High efficient Surface mounted LED round downlighter with white powder coated, pressure die cast aluminium housing. High transmittivity PS diffuser provides soft light. CRI>80, LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. Luminaire manufacturer shall produce certificate of association with LED manufacturer for minimum five years. The LED shall be compliant with LM80-08 standard with Useful L70 life of 50000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing) , CCT - 5700K,.Multistage Isolated Constant Current operated driver with range 150-260V AC Ambient temp-0 to 45DegC, Driver efficiency>85%, THD<10%, Powerfactor>0.9, Surge protection-2 kV, and Safety Extra Low Voltage Safe level<60V DC as per IEC standard . Wipro Model LD06-111XXX-57SMG1or Equivelent approved make
98
-
-
... More
od4861/2023_2024 : Supply installation testing and commissioning of IP20, 30W, 300 mm dia, Luminaire lumen ≥ 3000 lm. (100 lm/W), High efficient coral (bell) shape made of aluminium white colour coated outside finish. LED's provided with high efficient non yellowing PMMA diffuser provides soft light. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. Luminaire manufacturer shall produce certificate of association with LED manufacturer for minimum five years. The LED shall be compliant with LM80-08 standard with Useful L70 life of 50000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing) , CCT - 4000K. Multistage Isolated Constant Current-Constant Voltage operated driver with range 150-270V AC Driver efficiency>85%, Ambient temp-0 to 45 Deg C,THD<15%, Powerfactor>0.95, Surge protection-2 kV, and Safety Extra Low Voltage Safe level<60V DC as per IEC standard.<br>
31
-
-
... More
od4862/2023_2024 : Supply installation testing and commissioning ofIP20, 12W, with system efficacy 100 Lm/W. High efficient recess mounted LED round downlighter suitable for Xrail system mountable on special mounting plate ,with white powder coated, pressure die cast aluminium housing. High transmittivity PS diffuser provides soft light.CRI>80, LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. Luminaire manufacturer shall produce certificate of association with LED manufacturer for minimum five years. The LED shall be compliant with LM80-08 standard with Useful L70 life of 50000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing) , CCT - 5700K, . Multistage Isolated Constant Current-Constant Voltage operated driver with range 100-265V AC, Driver efficiency>85%, THD<10%, Powerfactor>0.9, Surge protection-2 kV,and Safety Extra Low Voltage Safe level<60V DC as per IEC standard.Cutout Dia of ø110mm
86
-
-
... More
od4863/2023_2024 : Supply installation testing and commissioning ofIP20, 12W, with system efficacy 100 Lm/W. High efficient recess mounted LED round downlighter suitable for Xrail system mountable on special mounting plate ,with white powder coated, pressure die cast aluminium housing. High transmittivity PS diffuser provides soft light.CRI>80, LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. Luminaire manufacturer shall produce certificate of association with LED manufacturer for minimum five years. The LED shall be compliant with LM80-08 standard with Useful L70 life of 50000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing) , CCT - 5700K, . Multistage Isolated Constant Current-Constant Voltage operated driver with range 100-265V AC, Driver efficiency>85%, THD<10%, Powerfactor>0.9, Surge protection-2 kV,and Safety Extra Low Voltage Safe level<60V DC as per IEC standard.Cutout Dia of ø110mm
27
-
-
... More
od4864/2023_2024 : Supply installation testing and commissioning of IP20, 30W, 3600 lumens, 1195x145x35 mm luminaire,Suitable for X Rail system mountable on linear arm, High efficient LED with Extruded pure white powder coated Aluminum housing with die cast end Cap and Special translucent satin finish PMMA diffuser.CRI>80, LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. Luminaire manufacturer shall produce certificate of association with LED manufacturer for minimum five years. The LED shall be compliant with LM80-08 standard with Useful L70 life of 50000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing) , CCT - 5700K, Multistage Isolated Constant Current-Constant Voltage operated driver with range 150-27V AC, Driver efficiency>85%, THD<10%, Powerfactor>0.9, Surge protection-3 kV,and Safety Extra Low Voltage Safe level<60V DC as per IEC standard.<br>
360
-
-
... More
od4865/2023_2024 : Supply installation testing and commissioning of 1.5 Mtr. Suspensions suitable for RCC ceiling installation .
300
-
-
... More
od4866/2023_2024 : supply installation testing and commissioning of Integrated modular luminaire Mounting system suitable for lighting which can use Linear, Recess and Pendant downlight, Spotlight, as well as Equipped to fit other LV devices such as Sensor, CCTV, camera and Speaker. Extruded Aluminium Modular sleek design duly powder coated in White, Corrosion free, Adjustable mounting suspension with SS wire, safety nut at gripper & wire end locks - Mounting plate for downlight
27
-
-
... More
od4867/2023_2024 : supply installation testing and commissioning of Integrated modular luminaire Mounting system suitable for lighting which can use Linear, Recess and Pendant downlight, Spotlight, as well as Equipped to fit other LV devices such as Sensor, CCTV, camera and Speaker. Extruded Aluminium Modular sleek design duly powder coated in White, Corrosion free, Adjustable mounting suspension with SS wire, safety nut at gripper & wire end locks - L corner 90°, 450mm
35
-
-
... More
od4868/2023_2024 : supply installation testing and commissioning of Integrated modular luminaire Mounting system suitable for lighting which can use Linear, Recess and Pendant downlight, Spotlight, as well as Equipped to fit other LV devices such as Sensor, CCTV, camera and Speaker. Extruded Aluminium Modular sleek design duly powder coated in White, Corrosion free, Adjustable mounting suspension with SS wire, safety nut at gripper & wire end locks Linear 1500 mm arm
542
-
-
... More
1.53.1 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable
25000
-
-
... More
od4869/2023_2024 : Testing and preparation of Fluke test report of all Data and Voice points
1400
-
-
... More
od4870/2023_2024 : Supply, installation, testing and commissioning of 3C x 1.5 Sq mm copper flexible armoured cable, for actuator power, requirements of controllers, 2 way valves etc as per the direction of Engineer incharge
250
-
-
... More
od4871/2023_2024 : Supply installation testing and commission of 12 core OFC fiber sm 9/125 micron as per direction of Engineer inchrage
1000
-
-
... More
od4872/2023_2024 : PVC TRUNKING/RACEWAYS :Supply and Installation of 100X35 mm PVC Trunking for the cable entry of network rack locatioans as per the direction of engineer incharge.
350
-
-
... More
od4873/2023_2024 : Supply installation testing and commissioning of 4C x 2.5 sqm PVC insulated armored copper power cables for power supply to field devices/ controller etc<br>
100
-
-
... More
od4874/2023_2024 : Supply installation testing commissioning of 24 port LIU loaded with pigtail and other accessories as per the engineer incharge
34
-
-
... More
od4875/2023_2024 : Supply, installation, testing, commissioning of 12 port LIU loaded with pigtail and other accessories with the direction of Engineer in charge
2
-
-
... More
od4877/2023_2024 : Supply installation testing and commission of 19inch 9 U closed Rack with Mounting Accessories with all connected accessories including Power distribution unit with 6 Sockets as per the Engineer Incharge
6
-
-
... More
od4878/2023_2024 : Supply installation testing and commission of 19 inch 15U closed Rack with Mounting Accessories with all connected accessories including Power distribution unit with 6 Sockets as per the engineer incharge.
2
-
-
... More
od4879/2023_2024 : Supply installation testing, commissioning of 19 inch 12 U closed Rack with Mounting Accessories with all connected accessories, including Power distribution unit with 6 Sockets
10
-
-
... More
od4880/2023_2024 : Supply installation testing and commissioning of Cat 6A 24 Port loaded Jack Panel with Rear Cable support manager for data and voice as per direction of Engineer incharge
60
-
-
... More
od4881/2023_2024 : supply , installation testing commissioning of Cat 6A U/FTP Multi-stranded Patch cord 1 Meter
1400
-
-
... More
od4882/2023_2024 : Supply installation of 2 port British style phase plate cost including PVC/ GI back box
1450
-
-
... More
od4883/2023_2024 : Supply ,installation, testing, commissioning of cat6 UTP jack with strain relief and bend limiting boot ( Yellow for data and blue for voice)
1500
-
-
... More
1.21.3 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm
500
-
-
... More
1.21.5 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.50 mm
800
-
-
... More
od4888/2023_2024 : Providing and Fixing of Electrical ISI Grade Rubber Mat suitable for 11000Volts Switchboards.
6
-
-
... More
od4889/2023_2024 : Supply and fixing of 440V Al Danger Boards of size 6;x 4both in Malayalam and English
3
-
-
... More
od4890/2023_2024 : Supply and Installation of the 2KVA UPS 30 MIN 1ph in I ph out Backup and wiring the UPS supply and auxillary supplies of instruments, connected cables etc.
1
-
-
... More
od4891/2023_2024 : Preparation of Shop drawings as per site conditions, the same shall be approved by client . Obtaining approval from Statutory Authorities, Preparation of statutory drawings, completion Report, Arranging for Inspection, attending defects report and obtaining safety certificate from Safety Authorities for commissioning of the electrical system.(including all required statutory Norms ). Three sets as built drawings with soft copy shall be submitted Note: Statutory fees will be reimbursed on submission of original Challan.
1
-
-
... More
16.26.1 : Supply, Installation, Testing and commissioning of factory built floor mounted chilled water double skin type horizontal/vertical air handling units made of 25mm thick panels consisting of pre plasticized G.I. casing of thickness 0.8mm outside layer and 0.8 mm inside layer with polyurethane foam (PUF) insulation factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as required, minimum 2 bend GSS/PVC eliminators, cooling coil section with aluminium finned copper tubes (tubes thickness not less than 0.5mm) cooling coil of 6 row deep, filter section with 50mm thick metal viscous/ washable synthetic type air prefilters, belt drive package with TEFC drive motor of efficiency class IE3 suitable for 415 ± 10% volts, 50Hz, 3 Phase AC supply suitably designed for varialbe frequency drive applications, drain onnections, stainless steel (18G) drain pan with PUF insulation, 150 mm dia. dial type pressure gauges (2 nos.)and industrial type thermometers (2 nos.) at the inlet and outlet of coil, auto purge valve wherever required, necessary vibration isolation arrangement etc. complete as per specification and of following capacities.Double skin AHU Units of 6 row cooling coil of 2500CFM(4300CMH)
7
-
-
... More
16.26.2 : Supply, Installation, Testing and commissioning of factory built floor mounted chilled water double skin type horizontal/vertical air handling units made of 25mm thick panels consisting of pre plasticized G.I. casing of thickness 0.8mm outside layer and 0.8 mm inside layer with polyurethane foam (PUF) insulation factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as required, minimum 2 bend GSS/PVC eliminators, cooling coil section with aluminium finned copper tubes (tubes thickness not less than 0.5mm) cooling coil of 6 row deep, filter section with 50mm thick metal viscous/ washable synthetic type air prefilters, belt drive package with TEFC drive motor of efficiency class IE3 suitable for 415 ± 10% volts, 50Hz, 3 Phase AC supply suitably designed for varialbe frequency drive applications, drain onnections, stainless steel (18G) drain pan with PUF insulation, 150 mm dia. dial type pressure gauges (2 nos.)and industrial type thermometers (2 nos.) at the inlet and outlet of coil, auto purge valve wherever required, necessary vibration isolation arrangement etc. complete as per specification and of following capacities.Double skin AHU Units of 6 row cooling of 3000CFM(5100CMH)
2
-
-
... More
16.26.3 : Supply, Installation, Testing and commissioning of factory built floor mounted chilled water double skin type horizontal/vertical air handling units made of 25mm thick panels consisting of pre plasticized G.I. casing of thickness 0.8mm outside layer and 0.8 mm inside layer with polyurethane foam (PUF) insulation factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as required, minimum 2 bend GSS/PVC eliminators, cooling coil section with aluminium finned copper tubes (tubes thickness not less than 0.5mm) cooling coil of 6 row deep, filter section with 50mm thick metal viscous/ washable synthetic type air prefilters, belt drive package with TEFC drive motor of efficiency class IE3 suitable for 415 ± 10% volts, 50Hz, 3 Phase AC supply suitably designed for varialbe frequency drive applications, drain onnections, stainless steel (18G) drain pan with PUF insulation, 150 mm dia. dial type pressure gauges (2 nos.)and industrial type thermometers (2 nos.) at the inlet and outlet of coil, auto purge valve wherever required, necessary vibration isolation arrangement etc. complete as per specification and of following capacities.Double Skin AHU Units of 6 row cooling coil of 4000CFM(6800CMH)
1
-
-
... More
od129763/2023_2024 : Supply, Installation, Testing and commissioning of factory built chilled water double skin type horizontal/vertical air handling units made of 25mm thick panels consisting of pre plasticized G.I. casing of thickness 0.8mm outside layer and 0.8 mm inside layer with polyurethane foam (PUF) insulation factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as required, minimum 2 bend GSS/PVC eliminators, cooling coil section with aluminium finned copper tubes (tubes thickness not less than 0.5mm) cooling coil of 6 row deep, filter section with 50mm thick metal viscous/ washable synthetic type air prefilters, belt drive package with TEFC drive motor of efficiency class IE3 suitable for 415 ± 10% volts, 50Hz, 3 Phase AC supply suitably designed for varialbe frequency drive applications, drain onnections, stainless steel (18G) drain pan with PUF insulation, 150 mm dia. dial type pressure gauges (2 nos.)and industrial type thermometers (2 nos.) at the inlet and outlet of coil, auto purge valve wherever required, necessary vibration isolation arrangement etc. complete as per specification and of following capacities.<br>Double skin AHU Units of 6 row cooling coil of 3TR/1200CFM/SP 500 wg
1
-
-
... More
od129764/2023_2024 : Supply, Installation, Testing and commissioning of factory built chilled water double skin type horizontal/vertical air handling units made of 25mm thick panels consisting of pre plasticized G.I. casing of thickness 0.8mm outside layer and 0.8 mm inside layer with polyurethane foam (PUF) insulation factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as required, minimum 2 bend GSS/PVC eliminators, cooling coil section with aluminium finned copper tubes (tubes thickness not less than 0.5mm) cooling coil of 6 row deep, filter section with 50mm thick metal viscous/ washable synthetic type air pre filters, belt drive package with TEFC drive motor of efficiency class IE3 suitable for 415 ± 10% volts, 50Hz, 3 Phase AC supply suitably designed for variable frequency drive applications, drain connections, stainless steel (18G) drain pan with PUF insulation, 150 mm dia. dial type pressure gauges (2 nos.)and industrial type thermometers (2 nos.) at the inlet and outlet of coil, auto purge valve wherever required, necessary vibration isolation arrangement etc. complete as per specification and of following capacities.<br>Double skin AHU Units of 6 row cooling coil of 4TR/1600CFM
1
-
-
... More
od129765/2023_2024 : Supply, Installation, Testing and commissioning of factory built floor mounted chilled water double skin type horizontal/vertical air handling units made of 25mm thick panels consisting of pre plasticized G.I. casing of thickness 0.8mm outside layer and 0.8 mm inside layer with polyurethane foam (PUF) insulation factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as required, minimum 2 bend GSS/PVC eliminators, cooling coil section with aluminium finned copper tubes (tubes thickness not less than 0.5mm) cooling coil of 6 row deep, filter section with 50mm thick metal viscous/ washable synthetic type air prefilters, belt drive package with TEFC drive motor of efficiency class IE3 suitable for 415 ± 10% volts, 50Hz, 3 Phase AC supply suitably designed for varialbe frequency drive applications, drain onnections, stainless steel (18G) drain pan with PUF insulation, 150 mm dia. dial type pressure gauges (2 nos.)and industrial type thermometers (2 nos.) at the inlet and outlet of coil, auto purge valve wherever required, necessary vibration isolation arrangement etc. complete as per specification and of following capacities.<br>Double skin AHU Units of 6 row cooling coil of 5TR/2000CFM/SP 500 wg
3
-
-
... More
od5060/2023_2024 : Supply , installation, testing, commissioning of Chilled water ceiling suspended Fan coil unit of double skin construction with compact cooling coil, multispeed fan motor, the blower shall be dynamicaly balanced and designed for silent operation, the filters shall be washable synthetic media type arranged for convenient cleaning and replacement, drain pan with pump .The units as specified in Schedule of Quantities shall be factory fitted with valve package comprising of 2 way pressure independent valve suitable for variable CHW flow with modulating actuator, ball with Y strainer valve at inlet Ball valve at outlet and necessary piping connections. The actuator of modulating valve shall be provided with interface cards to receive 0-10V or 4-20 mA signal from Minxon Digital Thermostat.The unit is supplied with corded remote controller of approved as per specifications.800 cfm / 2TR / 6R / 50 mm SP
17
-
-
... More
od134611/2023_2024 : Supply, Installation, Testing and commissioning of factory built floor mounted chilled water double skin type horizontal/vertical air handling units made of 25mm thick panels consisting of pre plasticized G.I. casing of thickness 0.8mm outside layer and 0.8 mm inside layer with polyurethane foam (PUF) insulation factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as required, minimum 2 bend GSS/PVC eliminators, cooling coil section with aluminium finned copper tubes (tubes thickness not less than 0.5mm) cooling coil of 6 row deep, filter section with 50mm thick metal viscous/ washable synthetic type air prefilters, belt drive package with TEFC drive motor of efficiency class IE3 suitable for 415 ± 10% volts, 50Hz, 3 Phase AC supply suitably designed for varialbe frequency drive applications, drain onnections, stainless steel (18G) drain pan with PUF insulation, 150 mm dia. dial type pressure gauges (2 nos.)and industrial type thermometers (2 nos.) at the inlet and outlet of coil, auto purge valve wherever required, necessary vibration isolation arrangement etc. complete as per specification and of following capacities.<br>Double skin AHU Units of 6 row cooling coil of 12TR/4800CFM/SP 50wg
1
-
-
... More
od134612/2023_2024 : Supply, Installation, Testing and commissioning of factory built floor mounted chilled water double skin type horizontal/vertical air handling units made of 25mm thick panels consisting of pre plasticized G.I. casing of thickness 0.8mm outside layer and 0.8 mm inside layer with polyurethane foam (PUF) insulation factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as required, minimum 2 bend GSS/PVC eliminators, cooling coil section with aluminium finned copper tubes (tubes thickness not less than 0.5mm) cooling coil of 6 row deep, filter section with 50mm thick metal viscous/ washable synthetic type air prefilters, belt drive package with TEFC drive motor of efficiency class IE3 suitable for 415 ± 10% volts, 50Hz, 3 Phase AC supply suitably designed for varialbe frequency drive applications, drain onnections, stainless steel (18G) drain pan with PUF insulation, 150 mm dia. dial type pressure gauges (2 nos.)and industrial type thermometers (2 nos.) at the inlet and outlet of coil, auto purge valve wherever required, necessary vibration isolation arrangement etc. complete as per specification and of following capacities.<br>Double skin AHU Units of 6 row cooling of 11TR/4400CFM/SP 50wg
1
-
-
... More
od5063/2023_2024 : Design supply installation testing and commissioning of hydrolic 4way cassette unit complete with auto swing louver arrangement multi row chilled water coil fan assembly. condensate drain pan decorative appearance panel housing and remote control 1.5TR/ 850CFM CASSETTE complete as per the direction of engineer incharge
4
-
-
... More
od5064/2023_2024 : VALVE PACKAGE FOR FCU : Supply, installation, testing and commissioning of 25 mm Dia valve Package for FCU. 2way Modulating valve, actuator, thermostat and ball valve with strainer, copper, brass fittings complete as required.
17
-
-
... More
od5068/2023_2024 : Supply and Installation of AHU 3.3 KW Starter panel for Nineth Floor unit with1No.32A TP and N MCCB with adjustable variable setting 16KA with all connected accessories, 1no. outgoing feeder & 1 no. starter for AHU and 1no. starter for AHU with 1 no. spare feeder provision (DOL starter up to 3.3Kw and star delta starter above 5.5 Kw) to be mounted in each of the AHU room. Each AHU shall have 4 nos. potential free contacts for IBMS interconnectivity and single phase supply for pressure independent valve ahu lighting (230V/24V with Transformer for PIBCV valve & for fire damper actuator with time delay relay) VFD with auto Manual operations.
15
-
-
... More
od5069/2023_2024 : Supply and Installation of AHU 5.5 KW Starter panel for Nineth Floor unit with 1No.32A TP and N MCCB with adjustable variable setting 16KA with all connected accessories, 1no. outgoing feeder & 1 no. starter for AHU and 1no. starter for AHU with 1 no. spare feeder provision (DOL starter up to 5.5Kw and star delta starter above 5.5 Kw) to be mounted in each of the AHU room. Each AHU shall have 4 nos. potential free contacts for IBMS interconnectivity and single phase supply for pressure independent valve & ahu lighting (230V/24V with Transformer for PIBCV valve & for fire damper actuator with time delay relay) VFD with auto & Manual operations.
5
-
-
... More
od5070/2023_2024 : Supply installation testing commissioning of Spigot dampers for the supply air of 200 mm dia.
50
-
-
... More
od5071/2023_2024 : Supplying, fixing acoustic lining on wall and celling of AHU rooms with 50 mm thick, density 32 kg/cu.m resin bonded glass fiber insulation friction fixed in 610 mm x 610 mm frame work made of 25x50x50x50x25xmm made out of 0.6 mm thick GI sheet U shaped channel and covered with reinforced fiber glass tissues and finished with0.80 mm perforated aluminum sheet etc. complete as required and as per specifications. 50 mm thick resin bonded glass wool having density of 32 kg/cum
50
-
-
... More
od5072/2023_2024 : Supply and Installation of fire rated flexible canvass for duct connection with AHU complete as per the direction of engineer incharge
34
-
-
... More
od5073/2023_2024 : Supply and installation of Condensate drain line with PVC 6 kgs piping insulated with 19mm nitrile The price shall include required P trap at the outlet of AHU and with 25 mm dia
10
-
-
... More
od5074/2023_2024 : Supply and installation of Condensate drain line with PVC 6 kgs piping insulated with 19mm nitrile The price shall include required P trap at the outlet of AHU and with 50 mm dia.
20
-
-
... More
od5075/2023_2024 : Supply and installation of Condensate drain line with PVC 6 kgs piping insulated with 19mm nitrile The price shall include required P trap at the outlet of AHU and with 40 mm dia.
80
-
-
... More
od5076/2023_2024 : Supply and installation of Condensate drain line with PVC 6 kgs piping insulated with 19mm nitrile The price shall include required P trap at the outlet of AHU and with 32 mm dia.
34
-
-
... More
od5077/2023_2024 : Supply installation testing commissioning of Automatic Air Vent, brass body, upto 12 bar pressure, removable lid, 1/2" threaded to BS21
22
-
-
... More
od5078/2023_2024 : Supply, installation, balancing and commissioning of factory fabricated 24G GSS sheet metal rectangular/round/ovel ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Factory fabricated GSS sheet metal rectangular ducting as per IS 655-2006.
100
-
-
... More
od5079/2023_2024 : Supply, installation, balancing and commissioning of 22G factory fabricated GSS sheet metal rectangular/round/ovel ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.(The cost including design, preparation of shop drawing etc. complete as per the direction of engineer incharge) Factory fabricated GSS sheet metal rectangular dueling as per IS 655-2006
50
-
-
... More
od107779/2023_2024 : AC SPIRAL DUCT: The colour shade for the air distribution equipments like ducts shall be approved by the Client / Architects before procurement and execution. The powder coating shall be 50 to 40 microns. The air distribution system comprises with all supports like anchor fasteners and tie-rods, cradles, angle iron supports, bolts and nuts, 4mm thick self-adhesive neoprene rubber gasket, stiffeners, zinc chromate painted angle iron flanges, chipping and plastering of openings made for duct supports etc., filling the gap with fiber glass wool and with fire sealant complete as per specification. The rates quoted shall include turning vanes, straightening vanes, splitters, inspection doors probe, provisions for BAS sensors, inlets with test openings enclosures complete with locking caps, chain, gaskets, insulating plugs, and extension for insulated ductwork etc. Supply, installation, testing and balancing of Air Distribution System consists of factory fabricated duct Galvanized Iron sheet metal ducting with acoustic insulation of 12 mm thick nitrile rubber GSS ducting 24G factory fabricated
650
-
-
... More
od107780/2023_2024 : AC SPIRAL DUCT: The colour shade for the air distribution equipments like ducts shall be approved by the Client / Architects before procurement and execution. The powder coating shall be 50 to 40 microns. The air distribution system comprises with all supports like anchor fasteners and tie-rods, cradles, angle iron supports, bolts and nuts, 4mm thick self-adhesive neoprene rubber gasket, stiffeners, zinc chromate painted angle iron flanges, chipping and plastering of openings made for duct supports etc., filling the gap with fiber glass wool and with fire sealant complete as per specification. The rates quoted shall include turning vanes, straightening vanes, splitters, inspection doors probe, provisions for BAS sensors, inlets with test openings enclosures complete with locking caps, chain, gaskets, insulating plugs, and extension for insulated ductwork etc. Supply, installation, testing and balancing of Air Distribution System consists of factory fabricated duct Galvanized Iron sheet metal ducting with acoustic insulation of 12 mm thick nitrile rubber GSS ducting 22G factory fabricated
250
-
-
... More
od107781/2023_2024 : AC SPIRAL DUCT: The colour shade for the air distribution equipments like ducts shall be approved by the Client / Architects before procurement and execution. The powder coating shall be 50 to 40 microns.The air distribution system comprises with all supports like anchor fasteners and tie-rods, cradles, angle iron supports, bolts and nuts, 4mm thick self-adhesive neoprene rubber gasket, stiffeners, zinc chromate painted angle iron flanges, chipping and plastering of openings made for duct supports etc., filling the gap with fibre glass wool and with fire sealant complete as per specification. The rates quoted shall include turning vanes, straightening vanes, splitters, inspection doors probe, provisions for BAS sensors, inlets with test openings enclosures complete with locking caps, chain, gaskets, insulating plugs, and extension for insulated ductwork etc.Supply, installation, testing and balancing of Air Distribution System consists of factory fabricated duct Galvanized Iron sheet metal ducting with acuistic insulation of 12 mm thick nitrile rubber GSS ducting 20G factory fabricated.
170
-
-
... More
16.3.8 : Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/ cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.63 aluminium sheet cladding complete with type 3, grade , roofing feltstrip (as per IS: 1322 as amended up to date ) at joints repairing of damage to building etc. as per specifications and as required complete in all respect.br Note:- The pipes of sizes 150 mm & below shall be M.S.'C" class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7 mm thick MS sheet for pipes of 400 mm dia and above.Chilled water piping of nominal size - 100mm dia. (50mm thick expanded polysterene)
10
-
-
... More
16.3.9 : Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/ cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.63 aluminium sheet cladding complete with type 3, grade , roofing feltstrip (as per IS: 1322 as amended up to date ) at joints repairing of damage to building etc. as per specifications and as required complete in all respect.br Note:- The pipes of sizes 150 mm & below shall be M.S.'C" class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7 mm thick MS sheet for pipes of 400 mm dia and above.Chilled water piping of nominal size - 80mm dai. (50mm thick expanded polysterene)
10
-
-
... More
16.3.10 : Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/ cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.63 aluminium sheet cladding complete with type 3, grade , roofing feltstrip (as per IS: 1322 as amended up to date ) at joints repairing of damage to building etc. as per specifications and as required complete in all respect.br Note:- The pipes of sizes 150 mm & below shall be M.S.'C" class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7 mm thick MS sheet for pipes of 400 mm dia and above.Chilled water piping of nominal size - 65mm dia.(50mm thick expanded polysterene)
10
-
-
... More
16.3.11 : Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/ cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.63 aluminium sheet cladding complete with type 3, grade , roofing feltstrip (as per IS: 1322 as amended up to date ) at joints repairing of damage to building etc. as per specifications and as required complete in all respect.br Note:- The pipes of sizes 150 mm & below shall be M.S.'C" class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7 mm thick MS sheet for pipes of 400 mm dia and above.Chilled water piping of nominal size - 50mm dia. (50mm thick expanded polysterene)
200
-
-
... More
16.3.12 : Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/ cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.63 aluminium sheet cladding complete with type 3, grade , roofing feltstrip (as per IS: 1322 as amended up to date ) at joints repairing of damage to building etc. as per specifications and as required complete in all respect.br Note:- The pipes of sizes 150 mm & below shall be M.S.'C" class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7 mm thick MS sheet for pipes of 400 mm dia and above.Chilled water piping of nominal size - 40mm dia. (50mm thick expanded polysterene)
150
-
-
... More
16.3.13 : Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/ cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.63 aluminium sheet cladding complete with type 3, grade , roofing feltstrip (as per IS: 1322 as amended up to date ) at joints repairing of damage to building etc. as per specifications and as required complete in all respect.br Note:- The pipes of sizes 150 mm & below shall be M.S.'C" class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7 mm thick MS sheet for pipes of 400 mm dia and above.Chilled water piping of nominal size - 32mm dia. (50mm thick expanded polysterene)
50
-
-
... More
16.3.14 : Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/ cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.63 aluminium sheet cladding complete with type 3, grade , roofing feltstrip (as per IS: 1322 as amended up to date ) at joints repairing of damage to building etc. as per specifications and as required complete in all respect.br Note:- The pipes of sizes 150 mm & below shall be M.S.'C" class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7 mm thick MS sheet for pipes of 400 mm dia and above.Chilled water piping of nominal size - 25mm dia. (50mm thick expanded polysterene)
110
-
-
... More
16.7.1.6 : Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O-Ring PN 16 pressure rating for chilled water/hot eater circulation as specifiedButterfly valve (Manual) 65 mm
2
-
-
... More
16.7.1.7 : Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O-Ring PN 16 pressure rating for chilled water/hot eater circulation as specifiedBUTTERFLY VALVE (MANUAL) 50mm
20
-
-
... More
16.7.1.8 : Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O-Ring PN 16 pressure rating for chilled water/hot eater circulation as specifiedButterfly valve (Manual) 40 mm
8
-
-
... More
16.7.4.6 : Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.Y- Strainer of Ductile CI Body flanged ends with stainless steel strainer for chilled/hot water circulation including insulation as specifiedY- Strainer of 65 mm dia
2
-
-
... More
16.7.4.7 : Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.Y- Strainer of Ductile CI Body flanged ends with stainless steel strainer for chilled/hot water circulation including insulation as specifiedY- Strainer of Ductile of 50 mm dia
6
-
-
... More
16.7.4.8 : Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.Y- Strainer of Ductile CI Body flanged ends with stainless steel strainer for chilled/hot water circulation including insulation as specifiedY- Strainer of 40 mm dia
8
-
-
... More
od5084/2023_2024 : Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.<br>Y- Strainer of Ductile CI Body flanged ends with stainless steel strainer for chilled/hot water circulation including insulation as specified<br>Y- Strainer of 25 mm dia
5
-
-
... More
16.7.2.6 : Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.Balancing valve with built in measuring facility with C.I Body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled /hot water circulation as specified.Balancing valve with built in measuring facility 65 mm dia
2
-
-
... More
16.7.2.7 : Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.Balancing valve with built in measuring facility with C.I Body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled /hot water circulation as specified.Balancing valve with built in measuring facility 50 mm dia
2
-
-
... More
16.7.2.8 : Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.Balancing valve with built in measuring facility with C.I Body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled /hot water circulation as specified.Balancing valve with built in measuring facility of 40 mm dia
4
-
-
... More
od5086/2023_2024 : Supply , installation testing and commissioning of 25mm size Ball valves having Bronze/Forged brass flanged/ screwed body, gun metal stem & sealing disc, P.T.F.E sealing, complete with all related items.
20
-
-
... More
od5087/2023_2024 : Supply , installation testing and commissioning of 40mm size Ball valves having Bronze/Forged brass flanged/ screwed body, gun metal stem & sealing disc, P.T.F.E sealing, complete with all related items.
8
-
-
... More
16.11.4.5 : Supply, Installation, Testing and Commissioning of following sizes electronic, selfbalancing, pressure independent type dynamic balancing valve with integrated 2 way modualating control valves in a single body. The actuator shall be capable of accepting upto 1 OV DC and upto 20mA electric signal and shall provide similar transduced feedback output to control system. Maximum close off pressure shall not be less than 6 Bar for upto 50 mm valves and not be less than 7 Bar for 65 mm & above. Valves should have pressure rating of 25 Bar minimum. 1665mm dia.
2
-
-
... More
16.11.4.6 : Supply, Installation, Testing and Commissioning of following sizes electronic, selfbalancing, pressure independent type dynamic balancing valve with integrated 2 way modualating control valves in a single body. The actuator shall be capable of accepting upto 1 OV DC and upto 20mA electric signal and shall provide similar transduced feedback output to control system. Maximum close off pressure shall not be less than 6 Bar for upto 50 mm valves and not be less than 7 Bar for 65 mm & above. Valves should have pressure rating of 25 Bar minimum. 1650mm dia.
2
-
-
... More
16.11.4.7 : Supply, Installation, Testing and Commissioning of following sizes electronic, selfbalancing, pressure independent type dynamic balancing valve with integrated 2 way modualating control valves in a single body. The actuator shall be capable of accepting upto 1 OV DC and upto 20mA electric signal and shall provide similar transduced feedback output to control system. Maximum close off pressure shall not be less than 6 Bar for upto 50 mm valves and not be less than 7 Bar for 65 mm & above. Valves should have pressure rating of 25 Bar minimum. 1640mm dia.
10
-
-
... More
16.11.4.9 : Supply, Installation, Testing and Commissioning of following sizes electronic, selfbalancing, pressure independent type dynamic balancing valve with integrated 2 way modualating control valves in a single body. The actuator shall be capable of accepting upto 1 OV DC and upto 20mA electric signal and shall provide similar transduced feedback output to control system. Maximum close off pressure shall not be less than 6 Bar for upto 50 mm valves and not be less than 7 Bar for 65 mm & above. Valves should have pressure rating of 25 Bar minimum. 1625mm dia.
10
-
-
... More
16.8 : Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required
40
-
-
... More
16.9 : Providing & fixing in position the mercury in glass industrial type thermometers.
40
-
-
... More
16.15 : Suppluying and Fixing of powder costed extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.
20
-
-
... More
od5094/2023_2024 : Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.
30
-
-
... More
16.13 : Supply, Insulation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications. GI volume control duct damper
25
-
-
... More
16.17 : Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminum with aluminum volume control dampers with anti smudge ring and removable core.
35
-
-
... More
16.18 : Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminum without volume control dampers with anti smudge ring and removable core.
35
-
-
... More
16.19.1 : Supplying, installation, testing & commissioning of thermal insulated flexible duct of following sizes duly supported at regulator interval as per site requirement etc. complete as required as per specifications.Thermal insulated flexible duct (200 mm dia)
200
-
-
... More
od5098/2023_2024 : Supplying, Fixing, testing and commissioning of fire dampers in supply air duct/ main branch and return air path as and where required of required sizes i/c control wiring, the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications.<br>Fire damper
20
-
-
... More
od5099/2023_2024 : Supply and Installation testing commissioning of of PVC disc valve of 150-200 mm diameter
84
-
-
... More
od5101/2023_2024 : Supply installation testing and commissioning of single phase inline fan of box type Toilet Exhaust Fan - 675 CFM etc complete as per direction of Engineer-in-charge.
1
-
-
... More
od5102/2023_2024 : Supply and installation of 10 mm Thick (Accoustic) Duct liner (Insulation) of specified thickness of Elastromeric Rubber Insulation manufactured as per ASTM E 84 test & which should also meet NFPA 90A supplementary materials for air distribution system which should not absorbs less 0.2% water by volume (ASTM c 209), should not support microbial growth (ASTM C1071, G21, G22) and should emit objectionable odors (ASTM C 665) and should have thermal conductivity of 0.27 ( R - 2.78 in 3.4" thickness) and water vapor permanence of 0.10. - Class "1" Material-.All joints of the Insulation material should be further covered with 50 mm wide 3 mm thick self adhesive tape made of similar material & Black Cotton Tape shall not be used.
100
-
-
... More
od5103/2023_2024 : Supply and installation 9mm Thick Thermal (Insulation) of specified thickness of Elastromeric Rubber Insulation manafactured as per ASTM E 84 test & which should also meet NFPA 90A supplementary materials for air distribution system which should not absorbs less 0.2% water by volume (ASTM c 209), should not support microbial growth (ASTM C1071, G21, G22) and should emit objectionable odors (ASTM C 665) and should have thermal conductivity of 0.27 ( R - 2.78 in 3.4" thickness) and water vapor permeance of 0.10. Joints should be sealed with 50 mm wide 3 mm thick self adhesive tape (Black Cotton Tape not acceptable). Class "O" Material-
100
-
-
... More
od5105/2023_2024 : Supply and installation of Duct type Diff pressure switch(20 Pa to 300 Pa). For CSUs & Fans Make Honeywell
20
-
-
... More
od5107/2023_2024 : Supply and installation of Duct mounted air temperature sensors including all the mounting accessories. The temperature measurement range shall be 10deg C to 50deg C for Supply air and return
17
-
-
... More
od5108/2023_2024 : Supply installation testing and commissioning of Ultrasonic BTU-meter with integral calculator / LCD display unit, suitable for mounting in any orientation in Supply or Return pipes and without the need for any flow-straightening lengths of pipes; pulse output for energy or volume; 24V AC/DC power supply; 2 slots for communication modules; optical interface; suitable for connectivity to third party BMS with BacNet / Modbus protocol. rates shall be inclusive of providing counterflanges, bolts, nuts gaskets and insulation of same specifications as that of CHW piping.shall be provided only for office areas for the purpose of metering billing the tenants on a periodic basis; suitable for measurement of water flows thru following equipment; selections / sizing shall be as per water flows, pressure drops and line sizes furnished under respective equipment schedules.40 mm dia
3
-
-
... More
od137413/2023_2024 : Supply installation testing and commissioning of Ultrasonic BTU-meter with integral calculator / LCD display unit, suitable for mounting in any orientation in Supply or Return pipes and without the need for any flow-straightening lengths of pipes; pulse output for energy or volume; 24V AC/DC power supply; 2 slots for communication modules; optical interface; suitable for connectivity to third party BMS with BacNet / Modbus protocol. rates shall be inclusive of providing counterflanges, bolts, nuts gaskets and insulation of same specifications as that of CHW piping.shall be provided only for office areas for the purpose of metering billing the tenants on a periodic basis; suitable for measurement of water flows thru following equipment; selections / sizing shall be as per water flows, pressure drops and line sizes furnished under respective equipment schedules.50 mm dia
30
-
-
... More
od137414/2023_2024 : Supply installation testing and commissioning of Ultrasonic BTU-meter with integral calculator / LCD display unit, suitable for mounting in any orientation in Supply or Return pipes and without the need for any flow-straightening lengths of pipes; pulse output for energy or volume; 24V AC/DC power supply; 2 slots for communication modules; optical interface; suitable for connectivity to third party BMS with BacNet / Modbus protocol. rates shall be inclusive of providing counterflanges, bolts, nuts gaskets and insulation of same specifications as that of CHW piping.shall be provided only for office areas for the purpose of metering billing the tenants on a periodic basis; suitable for measurement of water flows thru following equipment; selections / sizing shall be as per water flows, pressure drops and line sizes furnished under respective equipment schedules.25 mm dia
2
-
-
... More
od137415/2023_2024 : Supply installation testing and commissioning of Ultrasonic BTU-meter with integral calculator / LCD display unit, suitable for mounting in any orientation in Supply or Return pipes and without the need for any flow-straightening lengths of pipes; pulse output for energy or volume; with 2M long connected cable, with galvanic isolation; logbook as standard; long life batteries (15 years); 24V AC/DC power supply; 2 slots for communication modules; optical interface; shall allow data from preceding 60 months to be read; automatic self-diag Each tics and fault detection capability. Meters shall be certified by European Measuring Instruments Directive (MID) 2004/CE/22.suitable for connectivity to third party BMS with BacNet / Modbus protocol.PN 25 rating, screwed ends to BS21 for sizes ≤ 50 mm dia; flanged ends for sizes > 50 mm dia; rates shall be inclusive of providing counter flanges, bolts, nuts & gaskets and insulation of same specifications as that of CHW piping. shall be provided only for office areas for the purpose of metering & billing the tenants on a periodic basis; not required for common areas such as corridors, lift lobbies etc. suitable for measurement of water flows thru following equipment; selections / sizing shall be as per water flows, pressure drops and line sizes furnished under respective equipment schedules.- 32 mm dia
5
-
-
... More
od137416/2023_2024 : Supply installation testing and commissioning of Ultrasonic BTU-meter with integral calculator / LCD display unit, suitable for mounting in any orientation in Supply or Return pipes and without the need for any flow-straightening lengths of pipes; pulse output for energy or volume; 24V AC/DC power supply; 2 slots for communication modules; optical interface; suitable for connectivity to third party BMS with BacNet / Modbus protocol. rates shall be inclusive of providing counterflanges, bolts, nuts gaskets and insulation of same specifications as that of CHW piping.shall be provided only for office areas for the purpose of metering billing the tenants on a periodic basis; suitable for measurement of water flows thru following equipment; selections / sizing shall be as per water flows, pressure drops and line sizes furnished under respective equipment schedules.80 mm dia
1
-
-
... More
od5363/2023_2024 : Re fixing of existing duct in various locations
30
-
-
... More
od5364/2023_2024 : Removing of Existing Duct installed in various locations
30
-
-
... More
od5157/2023_2024 : Supply installation testing and commissioning of 2 way modulating valve with modulating actuator. The actuator shall be capable of receiving signal of 0-10 V from BMS ( feedback);25 mm dia
2
-
-
... More
od5158/2023_2024 : Supply of 2 way modulating valve with modulating actuator. The actuator shall be capable of receiving signal of 0-10 V from BMS ( feedback);40mm dia
3
-
-
... More
od5159/2023_2024 : Supply of 2 way modulating valve with modulating actuator. The actuator shall be capable of receiving signal of 0-10 V from BMS ( feedback);50mm dia
30
-
-
... More
od5160/2023_2024 : Supply of 2 way modulating valve with modulating actuator. The actuator shall be capable of receiving signal of 0-10 V from BMS ( feedback);80 mm dia
1
-
-
... More
od5163/2023_2024 : Supply installation testing and commissioning of of DDC supply and fixing of controller mounted on panel IP 54(indoor) /IP 65 ( outdoor) with required transformer, relay, terminals, indication lamps etc. DDC controller shall support Ethernet protocol or BACnet, LON MS/TP Protocol/LON-IP and controller sizing designed as per the IO Summary. Controller power supply shall be isolated from the activator ( Valve/ Damper) power supplies, all control components power will be fed from DDC panel .For CSU and Fans.
34
-
-
... More
od5164/2023_2024 : Supply drawing and termination of the following sizes of shielded copper Armored conductor round cables conforming to IS 694 part I 1960 in the surface / recess conduit as required including giving necessary connections of the following sizes. 2 core 1.5 Sq.mm Shielded armored cable
1500
-
-
... More
od5165/2023_2024 : Supply drawing and termination of the following sizes of shielded copper Armored conductor round cables conforming to IS 694 part I 1960 in the surface / recess conduit as required including giving necessary connections of the following sizes. 4 core 1.5 Sq.mm Shielded armored cable
1500
-
-
... More
od107796/2023_2024 : Circuit checking, Integration and updating of existing FAS and FPS system complete as per the direction of engineer in charge.
1
-
-
... More
od107797/2023_2024 : Upgradation and integration of all HVAC units with the existing BMS software. complete as per the direction of engineer incharge.
1
-
-
... More
od4894/2023_2024 : Modification in existing fire line for disconnection of existing sprinkler points and closing the opening using dummy plate including cost for all materials, labour and equipment for necessary cutting, jointing and welding and pressure testing etc complete as required and as per the direction of Engineer-in-charge.
15
-
-
... More
od4895/2023_2024 : Modification in the existing fire line for providing additional sprinkler points as per site conditions including cost for all materials, labour and equipment for necessary cutting, jointing and welding, supply & installation of sprinkler head, socket and pressure testing after installation etc complete as required and as per the direction of Engineer-in-charg
30
-
-
... More
od4896/2023_2024 : Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required
30
-
-
... More
od4897/2023_2024 : Supply, installation, testing and commissioning of clean agent modular type fire extinguisher 4 kg mounted to ceiling etc complete as per direction of Engineer-in-charge.
18
-
-
... More
od4898/2023_2024 : Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. 1500mm
15
-
-
... More
od4899/2023_2024 : Supplying, installation, testing and commissioning of Fire Panel for the operation and control of fire damper etc complete as required and as per specifications
15
-
-
... More
od4900/2023_2024 : Supplying, installation, testing & commissioning of intelligent analog addressable<br>photothermal detector complete with mounting base complete as required. (Below true Ceiling)
220
-
-
... More
od4901/2023_2024 : Supplying, installation, testing & commissioning response indicator on surface/ recess MS box having two LEDs metallic cover complete with all connections etc. as required.
220
-
-
... More
od4902/2023_2024 : Supplying, installation, testing & commissioning of fault isolator complete with base as required
20
-
-
... More
od4903/2023_2024 : Supplying, installation, testing & commissioning of addressable manual call point<br>complete as required.
20
-
-
... More
od4904/2023_2024 : Supplying, installation, testing & commissioning of addressable horn cum strobe<br>complete as required.
20
-
-
... More
od4905/2023_2024 : Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with<br>annealed copper conductor having XLPE insulation, steel wire armouring & FRLS<br>outer sheath complete as required.
1500
-
-
... More
od4906/2023_2024 : Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all<br>ancillaries and accessories like coupler etc. as required
100
-
-
... More
od4907/2023_2024 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.<br>25 mm
100
-
-
... More
od4908/2023_2024 : Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required as per the direction of engineer incharge
60
-
-
... More
od4909/2023_2024 : Supplying and drawing of cable Fire Retardant PVC insulated copper conductor<br>cable in the existing surface / recessed steel conduit of following pairs, cores and<br>size including connections and interconnections etc. as required. speaker cable Two pair, 2-core, 1.5 sqmm
1500
-
-
... More
od4910/2023_2024 : Supply,Installation of portable fire extinguisers manufctured as per IS with ISI marked suitable for wall mounting / floor mounting / trolley types with all accessories & signages. CO2 type - Capacity : 4.5Kgs.
5
-
-
... More
od4911/2023_2024 : Providing and installing Fire and emergency signage Boards( Fire exit directions, Fire Extinguisher, Fire duct, safe material handling procedures, Fire assembly area indications etc,) The signages should be battery backup with self illumination
10
-
-
... More
od4912/2023_2024 : Providing and installing of Fire Evacuation Plan with route in rectangular Acrylic sheet with ss bolt of size 600 x 450mm & 2 to 3mm thick
2
-
-
... More
od5057/2023_2024 : Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel and panel expandable up to 10 Loop. Each Loop should have capacity of 318 devices. UL-Listed with Minimum 640 Character Display, and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5 % V, 50 hz), and facility to have seamless integration with analog/digital voice evacuation system ( which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol Bac net/ Modbus/FNA over IP complete as per specifications. - Two loops
1
-
-
... More
od5058/2023_2024 : Supplying, installation, testing and commissioning of 480W Power Amplifier
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements