Kerala State IT Infrastructure Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 50,000Document Cost
₹ 2,975Tender Fee
Refer Documents
Summary
Composite Interior Fitout Works In Ground Floor Of Thapasya Building In Infopark Kochi Phase-i Campus
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_KSITI_396018_1Bid Award Id
ViewTender No
KSITIL/TP/2020-21/05Tender Authority
Kerala State IT Infrastructure Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
od46217/2020_2021 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material by mechanical means, , for all leads and lifts, including loading, transporting, unloading to approved dumping ground or as approved by Engineer-in-charge and as per direction of Engineer-in-Charge.
9.56
-
-
od46218/2020_2021 : Dismantling tile work in floors, walls and roofs laid in cement mortar, for all leads and lifts, including disposal of unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved dumping ground or as approved by Engineer-in-charge and as per directions of Engineer-in-charge
177.07
-
-
od46219/2020_2021 : Demolishing R.C.C. work by manual/ mechanical means and stockpiling at designated locations, stacking serviceable and unserviceable material separately including cutting reinforcement bars and disposal of dismantled waste materials, for all leads and lifts, by mechanical means, including loading, transporting, unloading to approved dumping ground or as approved by Engineer-in-charge,
0.32
-
-
od46220/2020_2021 : Demolishing cement concrete manually / by mechanical means including disposal of unserviceable, dismantled or waste materials by mechanical means, for all leads and lifts, including loading, transporting, unloading to approved dumping ground or as approved by Engineer-in-charge, as per direction of Engineer - in-Charge.
4.83
-
-
15.12.1 : Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below
4
-
-
od79773/2020_2021 : Dismantling wooden shelves including stacking with in 50 metres lead at stockyard etc. complete as per directions of Engineer-in-charge<br>
26.4
-
-
od79916/2020_2021 : Dismantling of wooden, gypsum, ACP cladding/ lining of walls and partitions including stacking of serviceable material in the stockyard of Infopark and disposal of debris to approved dumping yards for all lead and lift etc complete as per directions of Engineer-in-charge<br>
66
-
-
Civil works
-
-
-
6.4.1 : Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in:Cement mortar 1:4 ( 1 cement : 4 coarse sand)
4.38
-
-
6.13.2 : Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement : 4 coarse sand)
10.56
-
-
6.47 : Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor Vlevel with RCC band at sill level and lintel level with approved block laying polymermodified adhesive mortar all complete as per direction of Engineer-in-Charge. (Thepayment of RCC band and reinforcement shall be made for seperately).
1
-
-
50.6.1.6 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level upto floor five level thickness 20cm and above in : CM 1:6 ( 1 cement : 6 coarse sand sand) etc complete
1
-
-
od60743/2020_2021 : Reinforced cement concrete work with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size) in beams, suspended floors, roofs, having slope up to 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases including cost of curing, excluding the cost of centering, shuttering, finishing and reinforcement, etc complete as per directions of Engineer-in-charge
0.15
-
-
5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
1.5
-
-
5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
15
-
-
11.5 : 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufactures specification. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
48
-
-
4.2.3 : Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
0.03
-
-
2.30.1 : Excavating holes more than 0.10 cum & upto 0.50 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil; as directed within a lead of 50 m and lift up to 1.5 m.All kinds of soil
20
-
-
14.1.1 : Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)
2.95
-
-
11.41.3 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 800x 800 mm
44.25
-
-
11.46.3 : Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 800 x 800 mm
1.36
-
-
11.49.3 : Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 800x800 mm
131.36
-
-
11.48.3 : Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 800x800mm
136.95
-
-
11.47.3 : Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer,in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 800x800 mm
5.59
-
-
od60865/2020_2021 : Providing and fixing 1st quality ceramic glazed wall tiles of size 300 x 600 mm conforming to IS : 15622 , of approved make, in all colours, as approved by Engineer -in-Charge, in skirting, risers of steps and dados, laid with high ploymer modified quick set tile adhesive in avaerage 6 mm thickness and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete as per directions of Engineer-in-charge. (Basic rate - Rs.65/- per sq.ft)
2.76
-
-
8.2.2.1 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shadeArea of slab upto 0.50 sqm
1
-
-
8.3.2 : Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work
4.6
-
-
8.13.1 : Providing and laying Polished Granite stone flooring in required design and
patterns, in linear as well as curvilinear portions of the building all complete as
per the architectural drawings with 18 mm thick stone slab over 20 mm (average)
thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with
cement slurry and pointing with white cement slurry admixed with pigment of
matching shade including rubbing , curing and polishing etc. all complete as
specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye orequivalent.
1.16
-
-
5.46.1 : Providing and fixing of expansion joint system of approved make and manufactures
for various roof locations as per approved drawings and direction of Engineer-In-
Charge. The joints shall be of extruded aluminum base members with, self aligning
and self centering arragement support plates asper ASTM B221-02. The system
shall be such that it provides watertight roof to roof/roof to corner joint cover
expansion control system that is capable of accommodating multidirectional
seismic movement without stress to its components. System shall consist of metal
profile that incorporates a universal aluminum base member designed to
accommodate various project conditions and roof treatments. The cover plate shall
be designed of width and thickness required to satisfy movement and loading
requirements and secured to base members by utilizing manufacturer’s preengineered
self-centering arrangement that freely rotates / moves in all directions.
The Self centering arrangement shall exhibit circular sphere ends that lock and
slide inside the corresponding aluminum extrusion cavity to allow freedom of
movement and flexure in all directions including vertical displacement. The Joint
System shall resists damage or deterioration from the impact of falling ice, exposure
to UV, airborne contaminants and occasional foot traffic from maintenance
personnel. Provision of Moisture Barrier Membrane in the Joint System to have
water tight joint is mandatory requirement. Material shall confirm to ASTM 6063.Roof Joint of 100 mm gap.
6
-
-
od60932/2020_2021 : Plastering with cement mortar 1 : 4 ( 1 cement : 4 fine sand), 12 mm thick finished with a floating coat of neat cement including cost for scaffolding or form work as necessary, curing, providing plaster mesh at the junctions of masonry and concrete works as required etc. complete as per directions of Engineer-in-charge
52.06
-
-
14.43 : Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
211.88
-
-
13.26 : Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
224.5
-
-
od60942/2020_2021 : Wall painting two or more coats with premium acrylic emulsion paint having VOC content less than 50 grams / litre of approved brand and manufacture including applying additional coats wherever required to achieve even shade and colour after applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content and including cost of scaffolding or form work as necessary etc. complete as per directions of Engineer-in-charge
224.5
-
-
13.85.2 : Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With ready mixed red oxide zinc chromatic on steel / iron works having VOC content less than 250 grams/ litre
5.76
-
-
13.84.2 : Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats
5.76
-
-
Interior works
-
-
-
od63245/2020_2021 : Providing and fixing partition having 100 mm overall thickness upto true ceiling with 12.5 mm thick tapered edge gypsum fire resistant board conforming to IS : 2095 : part I, including frame work made of special sections power pressed/ roll form G.I. sheet with Zinc coating of 120/150 gsm , consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of 1 no. of Duraline board + 1 no of 12.5 mm thick double skin plain gypsum board to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre, with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher, applying plaster of paris putty to prepare even and smooth, finishing with two coats of primer suitable for board, painting two or more coats with premium acrylic emulsion paint having VOC content less than 50 grams/litre of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour, insulation to be provided with Resin Bonded rock wool conforming to IS: 8183, having density 48 Kg/m3, 50mm thick, wrapped in 200 G Virgin Polythene Bags fixed to boards with screw, rawl plug & washers and held and in position by criss crossing GI wire etc complete as per direction of Engineer-in-charge. Note: Payment will be for area measured from finished floor level to false ceiling level. Painting and putty work to be undertaken upto false ceiling level.
25.61
-
-
od72780/2020_2021 : Providing and fixing partition 100 mm thick made out of aluminium box frame using extruded sections of size 50 x 25 mm - 1.5mm thick at 600mm c/c in both direction covered with paneling on both sides with two numbers each of 12.5 mm tapered edge gypsum fire resistant board conforming to IS:2095 part 1 and including cost of jointing and finishing gypsum board to a flush finish with recommended jointing compound, jointing tape, joint finisher, applying plaster of paris putty to prepare even and smooth surface, finishing with two coats of primer suitable for gypsum board, painting two or more coats with premium acrylic emulsion paint having VOC content less than 50 grams/litre of approved brand and manufacture including additional coats wherever required to achieve even shade and colour, insulation to be provided with resin bonded rock wool conforming to IS:8183, having density 48 lg/m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to boards with screw, rawl plug and washers and held in position by criss crossing GI wire etc complete as per manufacturer's specification as per directions of Engineer-in-charge. Rate shall include cost for necessary hardwares and shall include for forming a paneling to any shape including circular profile etc. complete. Note: Actual seen surface area will be measured and paid.
10.19
-
-
od60979/2020_2021 : Providing and fixing Single glazed partitions with 12mm thick toughened glass as per drawings using full height Dorma partition systems or approved equivalent and shall be able to provide a sound reduction of 36dB. The glass panels shall be supported by Dorma Alexa 45 profiles Aluminium WCP Profiles of 25x45mm on all 4 sides of the Glass partition perimeter. Glass-to-glass butt joints shall be done using Aluminium ' H ' profile for 12 mm glass, and corner glass junctions to have 90° corner Aluminium profile. At Glass perpendicular 'T' junctions, Aluminium T-junction profile to be used. Finishes of all aluminium frame components shall be Natural Anodized Finished (20 microns). At the location of doors, Alexa 45 double action door profiles suitable for patch fitted doors to be provided around the door. Adjacent to the door frame, necessary service profile to be provided for installing the access control system as per requirement. Rate shall include for providing and fixing necessary support arrangement to ensure proper anchorage / fixing from the ceiling/partition to get sufficient rigidity (to the required level). Rate shall also include for transport charges, handling, loading and unloading, installation of glass and protecting the module and glass till handing over, testing, commissioning all necessary hardware, structural supports, scaffolding, wastage etc. complete and all as per manufacturers specifications as directed. The vendor has to prepare the shop drawing for approval. Note : Only the clear elevation area below the false ceiling level shall be considered for measurement.
30.89
-
-
od60980/2020_2021 : Providing and fixing partition above false ceiling, at locations of glass partitions, made out of aluminium box frame using extruded sections of size 50 x 25 mm - 1.5mm thick at 600mm c/c in both direction covered with paneling on both sides with 12.5 mm thick tapered edge gypsum fire resistant board including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification, insulation to be provided with Resin Bonded rock wool conforming to IS: 8183, having density 48 Kg/m3, 50mm thick, wrapped in 200 G Virgin Polythene Bags fixed to boards with screw, rawl plug & washers and held and in position by criss crossing GI wire etc complete as per directions of Engineer-in-charge. Rate shall include cost for necessary hardwares and shall include for forming a paneling to any shape including circular profile etc. complete. Actual seen surface area.(i.e) from false ceiling to true ceiling height will be measured and paid.
20.67
-
-
od63766/2020_2021 : Providing and fixing partition having 75 mm overall thickness upto true ceiling made out of aluminium box frame using extruded sections of size 50 x 25 mm - 1.5mm thick at 600mm c/c in both direction covered with paneling on both sides with 12 mm thick fire retardant plywood conforming to IS: 5509 and insulation to be provided with Resin Bonded rock wool conforming to IS: 8183, having density 48 Kg/m3, 50mm thick, wrapped in 200 G Virgin Polythene Bags fixed to boards with screw, rawl plug & washers and held and in position by criss crossing GI wire etc complete as per directions of Engineer-in-charge. Rate shall include cost for necessary hardwares and shall include for forming a paneling to any shape including circular profile etc. complete. Note: Surface area from FFL to bottom of false ceiling height will be measured and paid.
11.15
-
-
od63767/2020_2021 : Providing and fixing partition 75 mm thick upto true ceiling made out of aluminium box frame using extruded sections of size 50 x 25 mm - 1.5mm thick at 600mm c/c in both direction covered with paneling one side with 12 mm thick fire retardant plywood conforming to IS: 5509 and other side with 12.5 mm thick tapered edge gypsum fire resistant board and including cost of jointing and finishing gypsum board to a flush finish with recommended jointing compound, jointing tape, joint finisher, applying plaster of paris putty to prepare even and smooth surface, finishing with two coats of primer suitable for gypsum board, painting two or more coats with premium acrylic emulsion paint having VOC content less than 50 grams/litre of approved brand and manufacture including additional coats wherever required to achieve even shade and colour, insulation to be provided with resin bonded rock wool conforming to IS:8183, having density 48 lg/m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to boards with screw, rawl plug and washers and held in position by criss crossing GI wire etc complete as per manufacturer's specification as per directions of Engineer-in-charge. Rate shall include cost for necessary hardwares and shall include for forming a paneling to any shape including circular profile etc. complete. Note: Surface area.(i.e) from FFL to bottom of false ceiling height will be measured and paid.
20.34
-
-
od87075/2020_2021 : Providing and fixing decorative partition using 25 mm thick BWR plywood finished with 1.0 mm thick laminate of approved colour and shade and fixing of 10 mm thick toughened glass cut to size and shape as per design etc complete and as per directions of Engineer-in-charge
2.66
-
-
od85515/2020_2021 : Providing and fixing 100mm height Aluminium Modular skirting of approved make at Masonry walls & Partitions, and of approved shape & profile . The systems shall be of complete aluminium type including capping strips. It shall be made of extruded aluminium of 1.3mm avg. & anodized to 20 microns Rate to include supply & installation of matching colour corner guards. Rate to include all hardware, etc complete.
35.92
-
-
od71638/2020_2021 : Providing and fixing 12 mm thick frameless toughened patch fitting glass door with fixtures of Dorma make or equivalent, including providing and fixing patch fittings, floor spring with SS cover plate suitable for the door size and weight, lock with euro profile cylinder keys 3 nos, strike patch for lock, 350 mm pull handle SS 304 Satin finish of shape to be approved by Engineer-in-charge, door stopper half dome type and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge
13.8
-
-
od73199/2020_2021 : Providing and fixing in position factory finished flush doors using Aluminium door profile of approx size 40 x 92 mm of Walline, Dorma make or equivalent as frames and fixed in position with dash fasteners of required dia and length and factory finished ISI marked flush door shutters 30 mm thick conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of I st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters, providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters and laminated with 1 mm thick decorative laminate sheet, vision panel to be provided with bevelled glass 8 mm thick with required lipping along with all accessories Dorma make or equivalent such as SS 304 tubular door handle 350 mm long, brass mortise latch and lock with 6 levers without pair of handles, concealed door closer with sliding arm, hanging type floor door stopper etc complete as per directions of Engineer-in-charge
2.28
-
-
9.127.2 : Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss/ matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Types S, including cost of adhesive of approved quality.1.0 mm thick
41.58
-
-
od81181/2020_2021 : Providing and fixing, in position concealed G.I. section for wall paneling using 8 mm thick Cement bonded wood particle board as per IS:14276 of decorative finish as per approval of Engineer-in-charge fixed on the 'W' profile (0.55 mm thick) having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm and another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to the 'W' profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as per the drawing and directions of engineer-in-charge, the joints of the boards are finished with specially formulated jointing compound and 48 mm wide jointing tape to provide seamless finish.<br>
66
-
-
od72938/2020_2021 : Providing and fixing false ceiling using 12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1 at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120-150 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint, applying plaster of paris putty to prepare even and smooth, two coats of primer suitable for board, painting two or more coats with premium acrylic emulsion paint having VOC content less than 50 grams/litre of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge Note: The plan area only will be measured for payment
97.52
-
-
od72980/2020_2021 : Providing and fixing false ceiling using 12.5 mm thick tapered edge gypsum moisture resistant board conforming to IS : 2095-Part 1 at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120-150 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint, applying plaster of paris putty to prepare even and smooth, two coats of primer suitable for board, painting two or more coats with premium acrylic emulsion paint having VOC content less than 50 grams/litre of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge Note: The plan area only will be measured for payment
37.06
-
-
od73134/2020_2021 : Providing and fixing tiled false ceiling at all heights with GI Metal Ceiling Lay in perforated Tegular global white color tiles of size 595x595 mm and 0.5mm thick with 8 mm dr op; made of GI sheet having glavanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyster powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece , to be laid in true horizontal level, suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.
59.04
-
-
od80492/2020_2021 : Supply & fixing of 9 mm thick PET Acoustic Panels of approved make on Partition / Masonry wall surface and as directed using appropriate adhesive as per manufacturer instructions and edging profiles of natural anodised aluminium edging with counter sunk holes punched every 300mm. The rate shall be inclusive of preparing the base surface, all wastages, etc. Note : Only the actual installed area shall be measured for payment.<br>
4.68
-
-
od81128/2020_2021 : Providing & fixing 6 mm thick lacquered glass of (Saint Gobain or app. equivalent) and of approved shade as per pattern and details given in drawing, fixed with compatible SGG Glassmate Ultrafix - Neutral Alkoxy based Silicone having Shear Bond Strength (Dry, 24 hours), greater than 450 kpa and tack free time of 10 to 30 mins compatible for installation of mirror and lacquered glass / SGG Glassmate Mirror mounting tape MIRROR MOUNTING TAPE - Foam based double sided adhesive tape for instantaneous adhesion, compatible with mirror and lacquered glass having Shear bond strength (Dry, 15 mins) of 250 to 350 kpa) on a perfectly leveled surface. The contractor should submit test reports for back painted glass from manufacturer - High humidity Resistance (conforms to BS EN 1036 1999); Color fastness ISO 105B02 standard & Mechanical Resistance ISO 7784 ( Taber Abrasion test ) ISO 2409 ( Cross Hatch Test ) standard The manufactured back painted glass should be environmentally friendly (no lead, no arsenic, no copper, no formaldehyde); appropriate recycled content (12% post industrial / 6% post consumer); compressive strength (1000 MPa) & tensile strength (40 MPa),same as float glass, etc all complete as directed and to the satisfaction of the Engineer-in-charge. Rate to include all wastages, necessary supports & backing to ensure rigidity, levels & plumb, etc complete.
2.28
-
-
od80493/2020_2021 : Providing and fixing etching to glass panels using 3M frosted film (sparkling type) of Code No. 7725 with 15 years warranty, as per required pattern and design and as directed. Rate shall be inclusive of all wastages, etc. Note : Only the actual installed area shall be measured for payment.
27.93
-
-
Furniture
-
-
-
od64581/2020_2021 : Supply and installation of Work Stations (Open Office System) 1200mm X 600mm X 750mm ht Sharing type with table top made of 25mm thick Prelaminated particle board with 2mm PVC edge banding supported on under structure made of ERW tubular structure of size 50x50mm 1.6 mm thick powder coated with suitable levellers at either ends and connectors with 50X25 sections provided in between the leg for support; mast leg/ central leg with vertical cable raiser and power beam for integrated wire management, provision for fixing sockets, soft closing access flip boxes fitted on table top, privacy screens of height 400 mm: Fabric screens along main spine with pin-up band on top encased in aluminium extrusion along main and along return, glass screens with 8 mm thick laminated toughened glass with bevelled edges and round corners of approved colour (fabric of approved quality, fire retardant & colour) supported on brackets; modesty panel (aisle & passage side) : Below power beam/raceway/wire tray MS powder coated Perforated Modesty of 300 ht is considered , At aisle side 350 ht MS Powder coated perforated modesty considered. PRE.LAM PEDESTAL: One Mobile Prelam pedestal with lockable castors made of Prelam particle board finish. One drawers Pedestal 400mm (w) X 450mm (d) X 600 mm (h) contain two equal drawers and one larger drawer for box files and fixtures including brushed 100mm long SS handle, soft closing hinges, locks with keys. The slides are ball bearing to ensure smooth movement. All hardware of app. make etc. complete as per directions of Engineer-in-charge (Warranty period: 5 years)
24
-
-
od64582/2020_2021 : Supply and installation of Work Stations (Open Office System) 1200mm X 600mm X 750mm ht Non sharing type with table top made of 25mm thick Prelaminated particle board with 2mm PVC edge banding supported on under structure made of ERW tubular structure of size 50x50mm 1.6 mm thick powder coated with suitable levellers at either ends and connectors with 50X25 sections provided in between the leg for support; mast leg/ central leg with vertical cable raiser and power beam for integrated wire management, provision for fixing sockets, soft closing access flip boxes fitted on table top, privacy screens of height 400 mm: Fabric screens along main spine with pin-up band on top encased in aluminium extrusion along main and along return, glass screens with 8 mm thick laminated toughened glass with bevelled edges and round corners of approved colour (fabric of approved quality, fire retardant & colour) supported on brackets; modesty panel (aisle & passage side) : below table top MS powder coated perforated modesty of 450 ht is considered , At aisle side 350 ht MS Powder coated perforated modesty considered. PRE.LAM PEDESTAL: One Mobile Prelam pedestal with lockable castors made of Prelam particle board finish. One drawers Pedestal 400mm (w) X 450mm (d) X 600 mm (h) contain two equal drawers and one larger drawer for box files and fixtures including brushed 100mm long SS handle, soft closing hinges, locks with keys. The slides are ball bearing to ensure smooth movement. All hardware of app. make etc. complete as per directions of Engineer-in-charge (Warranty period: 5 years)
4
-
-
od81188/2020_2021 : Supplying and placing in position workstation 1200x600x750 mm size with tile based partition 1200 mm ht, 45-75 mm thick fabricated out of powder coated MS/Al frames and aluminium trims; Panel Board: 12 mm thick fabric covered magnetic board and white marker board above table top and prelaminated panel board below table top and back side and raceways two numbers, one at skirting level for data with provision for sockets and other below table top for running power cables with provision for sockets. Table top made of 25 mm thick prelaminated particle board edges with 2mm PVC edge banding; table supported on 50x50 mm square pipe made of 1.6mm thick CRCA powder coated legs and beams 50x25 mm made of 1.2mm CRCA powder coated, tie member made of 1.6 mm powder coated CRCA, levellers made of 100% recyclable nylon bolt, wire managers or fliptop on table top, privacy glass screens 400 mm high with 8 mm thick laminated toughened glass with bevelled edges and round corners of approved colour supported on suitable brackets on table top; mobile pedestal storage unit with three drawers 400x450x600 mm size along with all accessories such as handles, locks, soft closing hinges, sliders etc. complete as per directions of Engineer-in-charge (Warranty period: 5 years)
5
-
-
od81189/2020_2021 : Supplying and placing in position workstation 900x600x750 mm size with tile based partition 1200 mm ht, 45-75 mm thick fabricated out of powder coated MS/Al frames and aluminium trims; Panel Board: 12 mm thick fabric covered magnetic board and white marker board above table top and prelaminated panel board below table top and back side and raceways two numbers, one at skirting level for data with provision for sockets and other below table top for running power cables with provision for sockets. Table top made of 25 mm thick prelaminated particle board edges with 2mm PVC edge banding; table supported on 50x50 mm square pipe made of 1.6mm thick CRCA powder coated legs and beams 50x25 mm made of 1.2mm CRCA powder coated, tie member made of 1.6 mm powder coated CRCA, levellers made of 100% recyclable nylon bolt, wire managers or fliptop on table top, privacy glass screens 400 mm high with 8 mm thick laminated toughened glass with bevelled edges and round corners of approved colour supported on suitable brackets on table top; mobile pedestal storage unit with three drawers 400x450x600 mm size along with all accessories such as handles, locks, soft closing hinges, sliders etc. complete as per directions of Engineer-in-charge (Warranty period: 5 years)
2
-
-
od81176/2020_2021 : Supplying and placing in position premium quality Executive tables of approved make (Main table of size 1650x750x750 mm, pedestal of size 400x470x545mm) and following specification: Table top made of 25 mm thick prelaminated particle board edges post formed/ 2mm PVC edge banding; table supported on 50x50 mm square pipe made of 1.6mm thick CRCA powder coated legs and beams 50x25 mm made of 1.2mm CRCA powder coated, tie member made of 1.6 mm powder coated CRCA, levellers made of 100% recyclable nylon bolt, wire managers or fliptop on table top, metal/ prelam board modesty of 450 mm height, mobile pedestal storage unit with three drawers, return and back storage unit with one adjustable rack and prelaminated particle board side hung shutter, along with all accessories such as handles, locks, soft closing hinges, sliders etc. complete as per directions of Engineer-in-charge (Warranty period: 5 years)
1
-
-
od81177/2020_2021 : Supplying and placing in position premium quality Executive tables of approved make 2 nos of Main table of size 1500x600x750 mm, return table with storage unit of size 900x450x750mm; pedestal of size 400x470x545mm and modular central tile based partition 1200 mm ht, 45-75 mm thick in between the tables fabricated out of powder coated MS/Al frames and aluminium trims; Panel Board: 12 mm thick fabric covered magnetic board and white marker board above table top and below table top with prelaminated panel board and raceways two numbers, one at skirting level for data with provision for sockets and other below table top for running power cables with provision for sockets. Table top made of 25 mm thick prelaminated particle board edges post formed/ 2mm PVC edge banding; table supported on 50x50 mm square pipe made of 1.6mm thick CRCA powder coated legs and beams 50x25 mm made of 1.2mm CRCA powder coated, tie member made of 1.6 mm powder coated CRCA, levellers made of 100% recyclable nylon bolt, wire managers or fliptop on table top, metal/ prelam board modesty of 450 mm height, mobile pedestal storage unit with three drawers, return and back storage unit with one adjustable rack and prelaminated particle board side hung shutter, along with all accessories such as handles, locks, soft closing hinges, sliders etc. complete as per directions of Engineer-in-charge (Warranty period: 5 years)
1
-
-
od81178/2020_2021 : Supplying and placing in position premium quality Executive tables of approved make (Main table of size 1800x900x750 mm, return table with storage unit of size 900x450x750mm; pedestal of size 400x470x545mm; back storage unit of size 2600x450x750mm) and following specification: Table top made of 25 mm thick prelaminated particle board edges post formed/ 2mm PVC edge banding; table supported on 50x50 mm square pipe made of 1.6mm thick CRCA powder coated legs and beams 50x25 mm made of 1.2mm CRCA powder coated, tie member made of 1.6 mm powder coated CRCA, levellers made of 100% recyclable nylon bolt, wire managers or fliptop on table top, metal/ prelam board modesty of 450 mm height, mobile pedestal storage unit with three drawers, return and back storage unit with one adjustable rack and prelaminated particle board side hung shutter, along with all accessories such as handles, locks, soft closing hinges, sliders etc. complete as per directions of Engineer-in-charge (Warranty period: 5 years)
1
-
-
od89104/2020_2021 : Supply and installation of Conference Table of size 2400 mmx 900/2000mm and 750 mm (ht) to shape comprising of table top made out of 25 mm thk BWR ply board with stiffner of 19mm thk BWR ply finished with 1.5 mm thick Laminate of approved colour and shade with 2mm edge lipping finish. Table top to be fixed over support shelf made with 19 mm thk BWR ply finished with 1.0 mm thisk laminate of approved colour and shade with 2 mm thick edge lipping for exposed edges, shelf to have openable shutters made out of 19mm thick BWR ply finished with 1 mm thick Laminate of approved colour and shade, edges with 2 mm thick PVC edge lipping with necessary accessories such as soft close hinges, 100mm long brush finish S.S.handles, locks, magnetic catches. All the surfaces shall be finished with laminate. The table top to be provided with 2 nos of 8 module fliptop box and necessary wire management system to the fliptop boxes etc complete as per directions of Engineer-in-charge
1
-
-
od64825/2020_2021 : Supply and installation of premium high back chairs for CEO with mesh back , fabric upholstered seat, height adjustable lumbar support, height adjustable armrests, seat depth adjustment, tilt tension adjustment, back lock, nylon five star base etc. complete as per approval and directions of Engineer-in-charge. (Warranty period - 5 years).
2
-
-
od64608/2020_2021 : Supply and installation of high back chairs for Cabins and Meeting rooms with mesh back , fabric upholstered seat, height adjustable lumbar support, height adjustable armrests, seat depth adjustment, tilt tension adjustment, back lock, nylon five star base etc. complete as per approval and directions of Engineer-in-charge. (Warranty period - 5 years).
9
-
-
od64836/2020_2021 : Supplying and placing in position Medium Back Chairs for Workstations, Visitors chair in cabins, etc with good ergonomic design and lumbar support, aluminium polished Base, Gas lift mechanism, Twin Wheel Nylon Castors, adjustable swivel PU Armrest; Back with Mesh Upholstery, Synchro Tilt Mechanism, adjustable Lumbar Support; Seat with PU Moulded Cushion upholstered with fire retardant Fabric of approved colour as per directions of Engineer-in-charge (Warranty period: 5 years )
44
-
-
od64843/2020_2021 : Supply and installation of Pantry Chairs stackable type with Polypropylene seat and back and four point stainless steel legs as per directions of Engineer-in-charge (Warranty period: 5 years
4
-
-
od89108/2020_2021 : Supply and installation of L shaped Pantry counter - 1560x600x850 and 2450 x 500 x 750 mm size to shape and comprising of counter top with 18mm thick granite fixed using suitable adhesive and to include 40x15mm end granite beading along the outer perimeter of the counter-top. The beading shall have R-5 corner edges along the top and bottom edges , cutting of counter-top for accommodating the S.S sink and CP fittings and fixing the end beading to the cut-perimeter to neat finish. Basic rate of Granite : Rs.234/- per sq.ft.Table top to be fixed over support shelf made out of 19 mm thick PVC panel finished with 1.0 mm thick laminate of approved colour and shade with 2mm edge lipping finish for exposed edges, shelf to have openable shutters made out of 19mm thick PVC panel finished with 1 mm thick laminate of approved colour and shade with 2mm edge lipping finish for exposed edges with necessary accessories such as soft close hinges, 100mm long brush finish S.S.handles, locks, magnetic catches. All the surfaces shall be finished with laminate etc complete as per directions of Engineer-in-charge
1
-
-
od89109/2020_2021 : Supply and installation of Storage units with intermediate racks and sliding shutters as per drawing made out of 18 mm thick Pre- laminated flat pressed 3 layer ( medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, with screws and fittings wherever required of approved colour and shade with 2mm edge lipping finish on exposed edges alongwith necessary accessories such as soft close slider arrangement for shutters of suitable capacity, brush finish S.S.handles, locks, etc complete as per directions of Engineer-in-charge
12.81
-
-
od89110/2020_2021 : Supply and installation of Storage units with sliding shutters as per drawing made out of 18 mm thick Pre- laminated flat pressed 3 layer ( medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, with screws and fittings wherever required of approved colour and shade with 2mm edge lipping finish on exposed edges alongwith necessary accessories such as soft close slider arrangement for shutters of suitable capacity, brush finish S.S.handles, locks, aluminium shutter grill 450 mm long for ventilation, etc complete as per directions of Engineer-in-charge
9.12
-
-
Plumbing and sanitary works
-
-
-
18.8.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes
5
-
-
18.9.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work20 mm nominal outer dia pipes
50
-
-
od64374/2020_2021 : Providing, fixing and testing of approved make of 50 mm dia SWR - B- Class PVC pipes and fittings confirming to IS 13592-1992. and fittings (available fittings in market and fabricated fittings ) such as tee, elbow, coupler, etc. conforming to 14735 with latest amendment for soil and waste pipe works in toilets and utility area,etc. Pipes shall be laid in vertical stack and sunken in floors as per approved drawings with proper alignment and gradient as per the drawings with proper split clamp,anchor fastener and 10 mm thread rod supports. Wall cutting shall be done using wall cutting machine, and chasing to be done using electric jack hammer machine. Cutting and chasing with hammer shall not be permitted. Pipes and fittings shall be cleaned with pipe cleaners and joined by approved approved make solvent cement. After laying the pipes, before closing the pipes, gravity test to be conducted and get the approval from the Engineer-in-charge. Chased portions shall be covered with cement mortar. Work includes making required size holes in brick walls wherever necessary and re do same with water proofing components to the entire satisfaction of Engineer-in-charge.etc complete. All the stub outs shall be closed with proper end caps till of installation of sanitary wares and accessories etc. complete.
10
-
-
od64375/2020_2021 : Providing, fixing and testing of approved make of 75 mm dia SWR - B- Class PVC pipes and fittings confirming to IS 13592-1992. and fittings (available fittings in market and fabricated fittings ) such as tee, elbow, coupler, etc. conforming to 14735 with latest amendment for soil and waste pipe works in toilets and utility area,etc. Pipes shall be laid in vertical stack and sunken in floors as per approved drawings with proper alignment and gradient as per the drawings with proper split clamp,anchor fastener and 10 mm thread rod supports. Wall cutting shall be done using wall cutting machine, and chasing to be done using electric jack hammer machine. Cutting and chasing with hammer shall not be permitted. Pipes and fittings shall be cleaned with pipe cleaners and joined by approved approved make solvent cement. After laying the pipes, before closing the pipes, gravity test to be conducted and get the approval from the Engineer-in-charge. Chased portions shall be covered with cement mortar. Work includes making required size holes in brick walls wherever necessary and re do same with water proofing components to the entire satisfaction of Engineer-in-charge.etc complete. All the stub outs shall be closed with proper end caps till of installation of sanitary wares and accessories etc. complete.
25
-
-
od64376/2020_2021 : Making connection of drain or sewer line with existing lines including breaking into and making good the walls, floors with cement concrete 1:2:4 mix( 1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete as per directions of Engineer-in-charge
1
-
-
od64554/2020_2021 : Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink 410 x 410 mm size with bowl depth 195 mm without drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, 32mm dia CP bottle trap with extension pipe, 1 No. 15mm CP angle valve with 450mm long connection pipe and CP wall flanges, all complete set of approved make including painting of fittings and brackets, cutting and making good the walls wherever required and as per directions of Engineer-in-charge
1
-
-
od64540/2020_2021 : Supplying and fixing CP Sink cock with angular knob (table mounted model) (Model no. FLR-5359N Jaquar make or equivalent) including cost of all materials, accessories and labour charges etc complete as per the direction of Engineer-in-charge.
1
-
-
od64541/2020_2021 : Supplying and fixing CP Towel rod 60cm or nearest available length Jaquar make or equivalent including cost of materials and labour charges etc complete as per the direction of Engineer-in-charge.
1
-
-
od64542/2020_2021 : Providing and fixing 20 mm nominal bore ball valve (brass) of approved quality complete as per directions of Engineer-in-charge
1
-
-
Electrical
-
-
-
od52169/2020_2021 :Supply, Installation, Testing and Commissioning of 18W LED recess down light fitting with all accessories and interconnecting with 3 core 1.5 sqmm PVC insulated FRLS copper wire and fixing the same in the ceiling / partition as per site conditions.
37
-
-
od52170/2020_2021 :Supply, Installation, Testing and Commisioining of High performance, Recess mounted 36W 2X2 LED light fitting. The supply of accessories like clamps, supporting brackets and hardwares as required and interconnecting with 3 core 1.5 sqmm PVC insulated FRLS copper wire with all accessories required as per site conditions.
37
-
-
od52201/2020_2021 :Supply,Installation, Testing and Commissioning of single 4 feet 30 W LED Linear Suspended type fittings with all accessories Copper ballast and 2.5 mtr hanging chain required as per the site conditions (Including the earthing of fixture) (as per the Wipro Cat No: LM31-401-XXX-57-XXor equivalant type) watts
8
-
-
od63903/2020_2021 : DISTRIBUTION BOARD.Supply, erection, earthing, testing and commissioning of the following MCB DBs IP 42 Protection Metal Door powder coated including all interconnections and accessories like bolts, nuts and associated civil works. MCB DBs shall have comprising as follows: Double glazed Concealed in wall. All DBs are with Double Door. UDB -8W TPN Phase segregated MCB DB UPSDB -6W TPN Phase segregated MCB DB Incoming: 1no - 40A TP+2N MCB Outgoing: 3nos - 25A DP MCB , 18nos - 6/16/20A SP MCB
1
-
-
od63904/2020_2021 : DISTRIBUTION BOARD Supply, erection, earthing, testing and commissioning of the following MCB DB's IP 42 Protection Metal Door powder coated including all interconnections and accessories like bolts, nuts and associated civil works. MCB DBs shall have comprising as follows: Double glazed Concealed in wall. All DBs are with Double Door. LPDB -8W TPN Phase segregated MCB DB Incoming: 1no - 40A TPN MCCB Phase incommer: 40A, 30mA DP ELCD/RCCB Outgoing:3nos - 25A DP MCB,18nos - 6/16/32A SP MCB
1
-
-
od63905/2020_2021 : DISTRIBUTION BOARD.Supply, erection, earthing, testing and commissioning of the following MCB DB's IP 42 Protection Metal Door powder coated including all interconnections and accessories like bolts, nuts and associated civil works. MCB DBs shall have comprising as follows: Double glazed Concealed in wall. All DBs are with Double Door. VDB -6 way TPN Vertical MCCB DB Incoming: 1no - 100A TPN MCCB Outgoing: 3nos - 40A TPN MCB , 3nos - 25A TPN MCB
1
-
-
1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
250
-
-
od63219/2020_2021 : WIRING - CIRCUIT CUM POINT WIRING.The rates for all point wiring items shall also include supplying and fixing of the Conduits, conduit specials, bushes and other fittings,Approved GI saddles and grouting the same for exposed conduit work,2 mm thick Outlet boxes and junction box,All fixing accessories such as clips, brass screws etc,All work materials necessary for wiring a point circuit of any length from the Final Distribution Board to connector via switch and shall include the circuit wiring also except where identified.Primary Light / Fan Point Wiring: Supply, wiring, connecting commissioning of 3Runs 1.5 Sq.mm. (Ph, Neutral & Earth) PVC insulated multistranded FRLS copper wires in 1.8mm thick MS conduits fixed on ceiling partly and 1.8 mm thick PVC conduit concealed in the wall partly with necessary clamps, screws, etc., as required as per the site condition including supplying and fixing of modular 6A One way switch along with moulded front plate in GI anodised manufacturers mounting box fixed flush with the wall complete with all accessories including 3 plate ceiling rose.NOTE: Above false ceiling when it is open wiring it should be of MS conduit and for Vertical and horizontal drops concealed PVC conduits can be used.
28
-
-
od63221/2020_2021 : WIRING - CIRCUIT CUM POINT WIRING.The rates for all point wiring items shall also include supplying and fixing of the Conduits, conduit specials, bushes and other fittings,Approved GI saddles and grouting the same for exposed conduit work,2 mm thick Outlet boxes and junction box,All fixing accessories such as clips, brass screws etc,All work materials necessary for wiring a point circuit of any length from the Final Distribution Board to connector via switch and shall include the circuit wiring also except where identified.Secondary Light Points: The secondary light points will have to be wired from the primary light point as mentioned above.
25
-
-
od52231/2020_2021 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC;sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the<br>existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 2.50 sq mm for ups socket(white colour)
350
-
-
od52232/2020_2021 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC&sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the<br>existing surface / recess conduit as required including giving necessary connections of the following sizes.;3 core 2.50 sq mm for Raw power socket in black colour.cost for one meter
350
-
-
1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch
133
-
-
1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch
8
-
-
1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet
137
-
-
1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet
9
-
-
1.27.2 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)
45
-
-
1.27.4 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)
40
-
-
1.27.5 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm)
5
-
-
1.27.6 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.12 Module (200mmX150mm)
3
-
-
od79582/2020_2021 : Supply, Installation, Testing and Commissioning of 63A DP MCB along with moulded front plate in GI anodised
2
-
-
od79583/2020_2021 : Supply, Installation, Testing and Commissioning of 40A DP MCB along with moulded front plate in GI anodized
2
-
-
od63081/2020_2021 : RACEWAYS :Supply, installation & fixing of the following size of Raceways made out of 2,3 mm thick galvanized sheet steel with Rate shall be inclusive of all Civil works for concealing, floor finish, Curing, etc.100x38X1.6mm GI Race ways floor trunking Including required under floor access outlet, under floor cross overs, under floor vertical access units, single compartment as specified incl joint sleeves
50
-
-
od63083/2020_2021 : RACEWAYS :Supply, installation & fixing of the following size of Raceways made out of 2,3 mm thick galvanized sheet steel with Rate shall be inclusive of all Civil works for concealing, floor finish, Curing, etc.225x38X1.6mm GI Race ways floor trunking Including required under floor access outlet, under floor cross overs, under floor vertical access units, single compartment as specified incl joint sleeves
15
-
-
od63108/2020_2021 : supply , installation GI cable ladder trays bolt nut fastener type including tees, right angle bends etc. including all fixing accessories etc,of the following sizes as required as per the site condition and directions from engineer in charge - 150 x 50 mm cable tray
25
-
-
1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm
25
-
-
1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
120
-
-
1.21.3 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm
35
-
-
od63205/2020_2021 : Supply, installation & fixing of the 250X250X60-75mm junction box made out of 1 mm thick galvanized sheet steel junction boxes with Rate shall be inclusive of all Civil works for concealing, floor finish, Curing, etc. as per engineer in charge
10
-
-
od63206/2020_2021 : Supply, installation & fixing of the150X150X60-75mm junction box made out of 1 mm thick galvanized sheet steel junction boxes with Rate shall be inclusive of all Civil works for concealing, floor finish, Curing, etc. as per engineer in charge
20
-
-
90.12.7.30 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.
50
-
-
90.12.7.41 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.
20
-
-
90.12.6.14 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.
20
-
-
od67283/2020_2021 : Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade single core 16 sq mm copper conductor cable as required including giving necessary connections.
20
-
-
od72197/2020_2021 : Preparation of the drawing and submission to the chief electrical inspectorate to govt.of Kerala, Kerala Electricity Board and other statutory authorities for commissioning the system including arranging inspection and also necessary approval / safety certificate from authorities etc. for the ELECTRICAL / Other services etc,. installation. The necessary statutory fees/charges will be paid by the client against demand advice.
1
-
-
od85502/2020_2021 : Dismantling of existing AC duct, Split Ac, Electrical Cable, Switches and Sockets etc, the dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
1
-
-
NETWORKING
-
-
-
1.53.1 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable
1500
-
-
od64370/2020_2021 : Supply , installation, testing and commissioing of Cat6 7feet patch cord at both edn 100% yellow(for both voice & data)
85
-
-
od64371/2020_2021 : Supply ,installation,testing, commissioning of cat6 UTP jack with strain relief and bend limiting boot ( Yellow for data and blue for voice)
85
-
-
od64372/2020_2021 : Supply installation of 2 port british style phase plate cost including PVC/ GI back box
85
-
-
od64456/2020_2021 : Supply, installation , testing commissioning of 6U closed rack with all connected accessories rate including jack panel and PDU unit etc
1
-
-
FIRE DETECTION SYSTEM
-
-
-
od67234/2020_2021 : Supply, installation, testing and commissioning of ceiling mounted self illuminated with battery backup of 30 min FIRE EXIT signage board.(Cost including supporting chain)
6
-
-
od67235/2020_2021 : Supply & Installation of portable CO2 type - Capacity : 4.5 Kg fire extinguishers manufactured as per IS with ISI marked suitable for wall mounting / floor mounting / trolley types with all accessories and signages
2
-
-
od67236/2020_2021 : Supply & Installation of portable ABC Multipurpose - Capacity : 6Kg fire extinguisers manufactured as per IS with ISI marked suitable for wall mounting / floor mounting / trolley types with all accessories and signages.
2
-
-
od67237/2020_2021 : Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with<br>annealed copper conductor having XLPE insulation, steel wire armouring & FRLS ;outer sheath complete as required.
250
-
-
od67238/2020_2021 : Supplying, installation, testing & commissioning of addressable horn cum strobecomplete as required.
1
-
-
od67240/2020_2021 : Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.
20
-
-
od67241/2020_2021 : Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.(below Ceiling)
20
-
-
od67242/2020_2021 : Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.(above Ceiling)
20
-
-
od67243/2020_2021 : Supply, installation, testing and commissioning of UL Listed and FM approved single Loop Analog addressable Fire Alarm system with loop having the capability of connecting maximum 50 devices. The panel shall be able to give location of all fire and More Fire /fault and Isolation conditions of addressable units via the address codes.The panel shall have the capacity of storing upto 1000 events.Further, the panel must be able to automatically switch ON /OFF respective control module when ever any alarm is triggered. The panel should have inbuilt common Alarm, Fault and monitored sounder output. The panel shall have a 3.5 x 1.5Size backlit LCD display with resolution of 160 X 64 dots. Each event have a custom message up to 28 characters. The panel shall have a built in power supply and battery charger. Battery charger shall be able to charge the system batteries upto 18 AH. The Panel shall have inbuilt RS 485 card for connecting up to 8 Nos. Annunicator panels.cost including all the accessories required for installation.
1
-
-
od70918/2020_2021 : SITC of 1 pair flexible 14/40 SWG Specially coated wire, PVC sheathed Cable
110
-
-
od70919/2020_2021 : SITC of Transducer capable of Emitting Ultrasonic sound of frequencies 20 Khz and higher, with blinking LED Indication & shall capable to covering area of 150 Sq ft in floor & ceiling void and 300 sqft in Room void.
12
-
-
od70920/2020_2021 : Supply, Installation, Testing and Commissioning of Master Console panel including support bracket (12 TRANSDUCER PER CONSOLE)
1
-
-
HVAC
-
-
-
od66319/2020_2021 : Supply, installation, testing and commissioning of following minimum capacity 4- way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter ,fan section with low noise fan/ dynamically balanced blower, multi speed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cordless remote control etc., suitable for operation on single phase 230V ±10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shutdown provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at airinlet conditions of 27 Degree CD Band 19 Degree CWB temperature. - 2.8 TR
2
-
-
od66320/2020_2021 : Supply, installation, testing and commissioning of following minimum capacity 4- way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter ,fan section with low noise fan/ dynamically balanced blower, multi speed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cordless remote control etc., suitable for operation on single phase 230V ±10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shutdown provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at airinlet conditions of 27 Degree CD Band 19 Degree CWB temperature. -.8 TR
4
-
-
od66321/2020_2021 : Supply, installation, testing and commissioning of following minimum capacity 4- way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter ,fan section with low noise fan/ dynamically balanced blower, multi speed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cordless remote control etc., suitable for operation on single phase 230V ±10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shutdown provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at airinlet conditions of 27 Degree CD Band 19 Degree CWB temperature.- 1 TR
1
-
-
od66361/2020_2021 : Supply,Installation,Testing and Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s),minimum two compressors for above 14 HP modules, microprocessor based Controller,top discharge type condensing unit(s),with R410A Refrigerant,vibration isolators, with suitable foundation etc. complete as required.The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature with out tripping. The unit shall be suitable to work on 400V+/-10%,3Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5. For 14 HP
14
-
-
od66323/2020_2021 : Supply and erection of the following Heavy Duty PVC pipe with all joints, reducer, necessary elbows and tees, supporting arrangements, etc. Rate shall inclusive of thermal insulation with 13mm thickness FM approved closed cell nitrile rubber insulation covering with fire resistant fibre cloth fabric as a resistant to Scratch & Mechanical Impact.. -32mm Dia
10
-
-
od66324/2020_2021 : Supply and erection of the following Heavy Duty PVC pipe with all joints, reducer, necessary elbows and tees, supporting arrangements, etc. Rate shall inclusive of thermal insulation with 13mm thickness FM approved closed cell nitrile rubber insulation covering with fire resistant fibre cloth fabric as a resistant to Scratch & Mechanical Impact.. -25mm Dia
30
-
-
od66325/2020_2021 : Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class- O tubular insulation /with Class- O closed cell elastometric nitriler ubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : for 28.6mm Dia with 19mm thick insulation
5
-
-
od66326/2020_2021 : Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class- O tubular insulation /with Class- O closed cell elastometric nitriler ubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : for 19.1mm Dia with 19mm thick insulation
12
-
-
od66327/2020_2021 : Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class- O tubular insulation /with Class- O closed cell elastometric nitriler ubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : for 15.9mm Dia with 19mm thick insulation
15
-
-
od66328/2020_2021 : Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class- O tubular insulation /with Class- O closed cell elastometric nitriler ubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : for 12.7 mm Dia with 19 mm thick insulation
25
-
-
od66329/2020_2021 : Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class- O tubular insulation /with Class- O closed cell elastometric nitriler ubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : for 6.35mm Dia with 19mm thick insulation
15
-
-
od66330/2020_2021 : Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class- O tubular insulation /with Class- O closed cell elastometric nitriler ubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : for 9.05mm Dia with 19 mm thick insulation
15
-
-
od66331/2020_2021 : Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class- O tubular insulation /with Class- O closed cell elastometric nitriler ubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : for 9.5 mm Dia with 19mm thick insulation
20
-
-
od66332/2020_2021 : Suppy, Installation, Testing and Commissioning of BACnet/Modbus Network Interface and Central Remote Controller for monitoring and Controlling the VRF equipments in third party BMS. Rate shall inclusive of required hardware, software, Auto ON provision for critical areas based on temperature rise, sensors, etc.
1
-
-
od66335/2020_2021 : Supply and laying of PVC Copper Unarmoured Cable - Control cabling between indoor and outdoor units. The rate shall be including suitable size Heavy duty PVC conduit with conduit accessories and necessary fixing arrangement.
100
-
-
od66336/2020_2021 : Supply and erection of following sizes cable tray made out of 16G thick GI sheet folded to required shape with adequate number of supports for Insulated refrigerant pipe and cable conduits. The tray shall be covered 16G GI sheet at terrace and wherever exposed. 150 mm wide
50
-
-
od78211/2020_2021 : Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Factory fabricated 0.63mm GSS sheet metal rectangular ducting as per IS 655-2006
12
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements