Kerala State Industrial Development Corporation Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 2,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_KSIDC_221423_1Bid Award Id
ViewTender No
KSIDC/MMFP/PPC VYPIN/01/2018-19Tender Authority
Kerala State Industrial Development Corporation ViewPurchaser Address
-Website
http://https://www.ksidc.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Same as above but for Beyond 60cm girth upto and including 120 cm girth
20
-
-
Earth Work: Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and rammingof bottoms, lift upto 1.5 m, including getting out the excavated soiland disposal of surplus excavated soil as directed, within a lead of 50m. In all kinds of soil
286.648215
-
-
Excavation work by mechanical means (Hydraulic excavator)/ manualmeans in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. In Ordinary rock
1
-
-
Filling with approved earth obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet the requirements of table 300-2 (MoRT).
4135
-
-
supplying and finishing in plinth with M-sand under floors, including watering, ramming,consolidating and dressing complete.
150
-
-
Filling by available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
255
-
-
Concrete:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level. Cement Concrete grade 1:4:8 (Nominal Mix) with 40mm maximum size of stone aggregate
32
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level. Cement Concrete grade 1:3:6 (Nominal Mix) with 40mm maximum size of stone aggregate. For Flooring
116
-
-
Providing and fixing at or near ground level precast cement concrete in kerbs,edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse M-sand), including the cost of required centering, shuttering complete. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone
aggregate 20 mm nominal size).
27
-
-
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement:3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth
149
-
-
Reinforced Cement Concrete: Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M-25 of 500 mm diameter and length below the pile cap, to carry a safe working load not less than specified,excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap).
2058
-
-
Vertical load testing (initial) of piles in accordance with IS : 2911(Part-IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification and up to 50 tonne capacity Pile.Note: 1. Initial and Routine Load Test shall not be carried out by Dynamic method of testing.20.6.1.1 Initial test (Test Load 2.5 times the Safe
capacity
1
-
-
Providing and laying in position machine batched and machine mixed design mix M 25 grade cement concrete for reinforced cement concrete work,using cement content as per approved design mix, ncluding pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS:9103 to accelerate, retard setting of concrete,improve workability without impairing strength and durability as per direction of Engineer- in -charge. All works below plinth level. NOTE- (1) Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately.
98
-
-
Providing and laying in position machine batched and machine mixed design mix M 25 grade cement concrete for reinforced cement concrete work,using cement content as per approved design mix, ncluding pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS:9103 to accelerate, retard setting of concrete,improve workability without impairing strength and durability as per direction of Engineer- in -charge. All works above plinth level upto V level. NOTE- (1) Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately.
74
-
-
Add for using extra cement in the items of design mix over and above the specified cement content
86
-
-
centering and shuttering including strutting, propping etc., and removal of formwork (foundations,footing and bases for columns.)
97
-
-
centering and shuttering including strutting, propping etc., and removal of formwork (lintels, beam,plinth beams.)
861
-
-
centering and shuttering including strutting, propping etc., and removal of formwork (columns,pillars,piers,abutmeents.,)
172
-
-
steel reinforcement for RCC work including straightening,cutting,bending, placing in position and binding all complete upto plinth level TMT bars
23500
-
-
Steel reinforcement for RCC work including straightening,cutting,bending, placing in position and binding all complete above plinth level TMT bars
7900
-
-
Masonry:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 20cm in: CM 1:6 (1 cement : 6 coarse M-Sand) etc complete
137
-
-
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse M-sand)
31
-
-
Flooring: Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including shuttering with MS channel, finishing with power trowels,complete as per standards. For Internal RCC Flooring.
108
-
-
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush.
The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048
and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all
complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guaranteed for 10 years against any leakage.
For horizontal surface one coat @1.10 kg per sqm.
899
-
-
Kotah stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25mm thick. Semi polished
361.8
-
-
Groove cutting in flooring of size 8mm wide x4mm deep usingb mechanical devices and fill up with poly sulphide sealant in the groove as per manufacurer's standard.
250.5
-
-
Providing and fixing 1st quality ceramic Glazed wall tiles confirming to IS:15622, of approved make, in all colours, shades except burgundy,bottle green,black of any size as approved by Engineer-in-charge, in skirting,risers of steps and dadoos, over 12 mm thick bed of cement mortar 1:3 and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
399
-
-
Providing and fixing 1st quality ceramic Glazed floor tiles of size 300 x300 mm confirming to IS:15622(thickness to be specified by the manufacturer), of approved make, in all colours such as white ,ivory,gre. fume red brown laid over 20 mm thick bed of cement mortar 1:4 , including pointing in white cement mixed with pigment of matching shade complete.
49
-
-
Providing and laying vitrified floor tiles in different sizes, 8mm thick
with water absorption less than 0.08%
and conforming to IS: 15622, of approved make, in all colours and shades,
laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),
jointing with grey cement slurry @ 3.3kg/sqm including grouting the
joints with white cement and matching pigments etc., complete Tile size 600x600 mm. (Basic cost of tile Rs.600 per sqm).
23.4
-
-
Providing and laying Vitrified tiles in different sizes (8mm thickness) with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in
skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete. Tile size 600x600 mm. (Basic cost of tile Rs.600 per sqm).
2.8000000000000003
-
-
Finishing:Cement plaster with fine sand of 12mm thick using cement plaster of mix of 1:4(interior)
706
-
-
18mm cement plaster in two coats, under layer 12mm thick cement plaster in 1:5 and a top layer of 6mm thick cement plaster 1:3 ( 1 cement:3 coarse M-sand) finish rough with sponge.
704
-
-
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :
706
-
-
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :
Two or more coats on new work ( Interior walls)
353
-
-
Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm) two coats Two coats
353
-
-
Painting with synthetic enamel paint VOC content less than 150 gm/ litre of approved brand and manufacture, including primer and applying additional coats wherever required to achieve even shade and colour.-two coats
353
-
-
Joineries: Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady] the frame.
27.2
-
-
30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.
6.3
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 100x10 mm For toilet FRP doors
8
-
-
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 100 mm For toilet FRP doors
8
-
-
Providing and fixing 100mm brass locks (best make of approved
quality) for aluminium doors including necessary cutting and making good etc. complete.
4
-
-
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
8
-
-
Providing and fixing factory made uPVC white colour sliding
glazed window upto 1.50 m in height dimension comprising of
uPVC multi-chambered frame with in-built roller track and sash
extruded profiles duly reinforced with 1.60 ± 0.2 mm thick
galvanized mild steel section made from roll forming process of
required length (shape & size according to uPVC profile),
appropriate dimension of uPVC extruded glazing beads and
uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy
(white powder coated) touch locks with hook, zinc alloy body
with single nylon rollers (weight bearing capacity to be 40 kg),
G.I fasteners 100 x 8 mm size for fixing frame to finished wall
and necessary stainless steel screws etc. Profile of frame & sash
shall be mitred cut and fusion welded at all corners, including
drilling of holes for fixing hardware's and drainage of water etc.
After fixing frame the gap between frame and adjacent finished
wall shall be filled with weather proof silicon sealent over backer
rod of required size and of approved quality, all complete as
per approved drawing & direction of Engineer-in-Charge. (Single
/ double glass panes, wire mesh and silicon sealant shall be
paid separately) Note: For uPVC frame and sash extruded profiles minus 5%
tolerance in dimension i.e. in depth & width of profile shall be
acceptable. Two track two panels sliding window made of (small
series) frame 52 x 44 mm & sash 32 x 60 mm both
having wall thickness of 1.9 ± 0.2 mm and single
glazing bead of appropriate dimension. (Area of
window upto 1.75 sqm)
8.7
-
-
Providing and fixing factory made uPVC white colour fixed glazed
windows/ventilators comprising of uPVC multi-chambered frame
and mullion (where ever required) extruded profiles duly
reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section
made from roll forming process of required length (shape & size
according to uPVC profile), , uPVC extruded glazing beads of
appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm
size for fixing frame to finished wall, plastic packers, plastic caps
and necessary stainless steel screws etc. Profile of frame shall
be mitred cut and fusion welded at all corners, mullion (if
required) shall be also fusion welded including drilling of holes
for fixing hardware's and drainage of water etc. After fixing frame
the gap between frame and adjacent finished wall shall be filled
with weather proof silicon sealant over backer rod of required
size and of approved quality, all complete as per approved
drawing & direction of Engineer-in-Charge. (Single / double glass
panes and silicon sealant shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus
5% tolerance in dimension i.e. in depth & width of profile shall
be acceptable.Fixed window / ventilator made of (small series) frame
47 x 50 mm & mullion 47 x 68 mm both having wall
thickness of 1.9 ± 0.2 mm and single glazing bead of
appropriate dimension. (Area upto 0.75 sqm.)
2.2
-
-
Providing and fixing factory made uPVC white colour casement/
Casement cum fixed glazed door comprising of uPVC multichambered
frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of
required length (shape & size according to uPVC profile), uPVC
extruded glazing beads of appropriate dimension, EPDM gasket,
zinc alloy (white powder coated) 3D hinges and one handle on
each side of panels along with zinc plated mild steel multi point
locking having transmission gear, cylinder with keeps and one
side key, G.I fasteners 100 x 8 mm size for fixing frame to finished
wall and necessary stainless steel screws, etc. Profile of frame &
sash shall be mitred cut and fusion welded at all corners, mullion
(if required) shall be also fusion welded including drilling of holes
for fixing hardware's and drainage of water etc. After fixing frame
the gap between frame and adjacent finished wall shall be filled
with weather proof silicon sealent over backer rod of required
size and of approved quality, all complete as per approved
drawing & direction of Engineer-in-Charge. (Single / double glass
panes and silicon sealent shall be paid separately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Casement door with 3D hinges made of (big series)
frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area
of door upto 2.00 sqm).
21
-
-
same as above but for Casement door with top hung ventilator with 3D and
S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm
and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.50 sqm)
1.2
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness
15
-
-
Provising and fixing for doors Plain particle board flat pressed, 3 layer or graded
wood particle board medium density Grade I, IS : 3087 marked
10
-
-
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architecturaldrawings and direction of Engineer-in-charge complete.
113
-
-
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.
213
-
-
Steel Works: Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
2650
-
-
Pre Engineered Struture: Design, supply and construction of PEB building as shown in drawings by using the built up sections are made from hot rolled platers conforming to ASTM A - 572 GR 50 and other sections except beams are mill sections complying with IS : 2062 and the section should be provided with 2 coats of epoxy primer after sand blasting and 2 coats of epoxy paints as per the approved colour. Bracing rods and sag rods are made of steel bars conforming to IS 2062 with a minimum yield strength of 240 MPa. All the fasteners should be confimed as per the IS/ASTM specifications. The roofing and Fascia board should be ZINC Aluminium alloy coated colour roof sheet of 0.47mm nominal thickness, cold roll formed from a cold rolled coil confirming to ASTM A 792 M Grade 80 with a minimum uield strenght of 550 MPa. The eves gutter should be provided with Zinc Aluminium alloy coated steel sheet of 0.8T with GI Gutter hangers. Downspouts are should be provided with 100mm size of Zinc aluminium coated shees with GI Leader straps. Galvanised purlin should be addopted as pe the required size. The quotated price should include the supply and fixing charges of MS inserts, anchor foundation bolts, in the concrete, day light sheets in the Roof, Turbo ventilators, wall side cladding, flashings etc. complete. The PEB structure shall also withstand the load for PUF false ceiling and forced draft air coolers, cable trays, service pipes etc for the cold store chillers as per load details provided. Also the quoted rate should include all necessary labour charges and material and machinery charges including all works related the PEB structures excluding Civil works as per the detailed drawing, specifications attached and instructions of engineer in charge.
840
-
-
Miscellaneous Works: Grouting the bolt pockets, machine foundations, colimn bases etc with general purpose grout (GP2) as per manufacturer's guide lines, specifcation and direction etc complete.
0.30000000000000004
-
-
Providing and laying factory made chamfered edge Cement Concrete paver blocks
in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,
thickness & size/ shape, made by table vibratory method using PU mould, laid in
required colour & pattern over 50mm thick compacted bed of sand, compacting and
proper embedding/laying of inter locking paver blocks into the sand bedding layer
through vibratory compaction by using plate vibrator, filling the joints with sand and
cutting of paver blocks as per required size and pattern, finishing and sweeping
extra sand. complete all as per direction of Engineer-in-Charge
80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
2400
-
-
CONSTRUCTION OF COMPOUND WALL & GATE
-
-
-
Earth Work:Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and rammingof bottoms, lift upto 1.5 m, including getting out the excavated soiland disposal of surplus excavated soil as directed, within a lead of 50m. In all kinds of soil
248
-
-
Excavation work by mechanical means (Hydraulic excavator)/ manualmeans in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. In Ordinary rock
1
-
-
Filling by available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
75
-
-
Concrete:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level. Cement Concrete grade 1:4:8 (Nominal Mix) with 40mm maximum size of stone aggregate
23
-
-
Reinforced Cement Concrete: Providing and laying in position machine batched and machine mixed design mix M 25 grade cement concrete for reinforced cement concrete work,using cement content as per approved design mix, ncluding pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS:9103 to accelerate, retard setting of concrete,improve workability without impairing strength and durability as per direction of Engineer- in -charge. All works below plinth level NOTE- (1) Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately.
17
-
-
Providing and laying in position machine batched and machine mixed design mix M 25 grade cement concrete for reinforced cement concrete work,using cement content as per approved design mix, ncluding pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS:9103 to accelerate, retard setting of concrete,improve workability without impairing strength and durability as per direction of Engineer- in -charge. All works above plinth level upto V level NOTE- (1) Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately.
7
-
-
centering and shuttering including strutting, propping etc., and removal of formwork (lintels, beam,plinth beams.)
143
-
-
steel reinforcement for RCC work including straightening,cutting,bending, placing in position and binding all complete upto plinth level TMT bars
1485
-
-
Masonry: Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :
257
-
-
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 20cm in: CM 1:6 (1 cement : 6 coarse M-Sand) etc complete
60
-
-
Finishing:18mm cement plaster in two coats, under layer 12mm thick cement plaster in 1:5 and a top layer of 6mm thick cement plaster 1:3 ( 1 cement:3 coarse M-sand) finish rough with sponge.
1043
-
-
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :
1043
-
-
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :
Two or more coats on new work ( Interior walls)
1043
-
-
Steel Works:Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
372
-
-
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete for Gate .
788
-
-
Providing 5 Nos of G. I. barbed wire having weight 9.38 kg per 100 metres (min) and fixing in position in railing work with G.I staples or G.I binding wire tied to 6mm bar nibs, complete in all respect and as per drawing as directed by Engineer - in - Charge.(In Side and Rear Portion Boundary Wall)
1250
-
-
Providing and laying weep holes of 110mm dia PVC pipe 4Kg/cm2 @ 2m c/c in wall at selected location by Engineer in Chrage, complete as per drawing.
126
-
-
Providing and fixing in position 12mm thick bitumen impregnated fibre board confirming to IS:1838 including cost of primer, sealing compound in expansion joints.
30
-
-
Providing with synthetic enamel paint of approved brand and manufacture to required colour to give an even shade:
56
-
-
CONSTRUCTION OF STORM WATER DRAIN.
-
-
-
Earth Work:Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and rammingof bottoms, lift upto 1.5 m, including getting out the excavated soiland disposal of surplus excavated soil as directed, within a lead of 50m. In all kinds of soil
369
-
-
Filling available excavatged earth (excluding rock) in trenches, plinth, sides of foundations etc. In layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.50 m.
213
-
-
Concrete:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
30
-
-
Reinforced Cement Concrete: Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
127
-
-
Centering and shuttering including strutting, propping etc. and removal of form for Foundation and Raft
108
-
-
Same as above but for Wall
798
-
-
Same as above but for Cover slab
270
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
10500
-
-
CEMENT PLASTER :12 mm cement plaster of mix :
661
-
-
Dispoal of unwanted material upto 10 Km Lead by truch excluding loading/unloading and stacking for items which is included in the excavation items
460
-
-
CONSTRUCTION OF UG SUMP
-
-
-
Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 30 cm girth upto and including 60 cm girth
1
-
-
Same as above but for Beyond 60 cm girth upto and including 120 cm girth
1
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. All Kinds of Soil
339.48
-
-
Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete (Measurements to be taken of the face area timbered). Tank Pit
139.52
-
-
Extra rates for quantities of works, executed in or under water and/or liquid mud, including pumping out water as required
226
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed.
48.576000000000015
-
-
Filling by available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
68.99600000000008
-
-
Concrete: Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level. Cement Concrete grade 1:4:8 (Nominal Mix) with 40mm maximum size of stone aggregate.
10.256
-
-
RCC:Providing and laying in position machine batched and machine mixed design mix M 30 grade cement concrete for reinforced cement concrete work,using cement content as per approved design mix, ncluding pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS:9103 to accelerate, retard setting of concrete,improve workability without impairing strength and durability as per direction of Engineer- in -charge.. All works below plinth level
85.16580000000002
-
-
Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum)
85.17
-
-
Providing and laying 50 mm thick with cementconcrete 1:2:4 (1 cement : 2 coarse M-sand : 4 graded stone aggregate20 mm nominal size). For screed concrete
80
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete
13.46
-
-
centering and shuttering including strutting, propping etc., and removal of formwork .walls
342.32599999999996
-
-
Centering and shuttering including strutting, propping etc., and removal of formwork. Suspended floors, roofs, landings, balconies and access platform
57.04
-
-
Centering and shuttering including strutting, propping etc., and removal of formwork Lintels, beams, plinth beams, girders, bressumers and cantilevers
3.36
-
-
Centering and shuttering including strutting, propping etc., and removal of formwork Columns, Pillars, Piers, Abutments, Posts and Struts
5.87
-
-
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured). Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
57.04
-
-
steel reinforcement for RCC work including straightening,cutting,bending, placing in position and binding all complete upto plinth level TMT bars
11071.554000000002
-
-
Finshing:Cement plaster with fine sand of 12mm thick using cement plaster of mix of 1:4.
285.405
-
-
Miscellaneous Works: Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/5cm. Tear strength in longitudinal and ransverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick
285.405
-
-
Providing and fixing soil, waste and vent pipes : CI 100 mm dia Sand cast iron S&S pipe as per IS: 1729
4
-
-
Providing and fixing CI slotted cowl :100 mm dia
4
-
-
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof
16
-
-
Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand 6 graded stone aggregate 20 mm nominal size) including disposal of malba.
16
-
-
Providing and fixing in position precast R.C.C manhole withframe of required shape and approved quality. Rectangular shape 600x450 mm internal dimensions
4
-
-
Providing and fixingpuddle flange using MS/GI pipe of required dia with welded to collar plate and fixed in position at correct level, alignment etc as per drawing and directions. from dia 50 mm to 100 mm
4
-
-
Same as above but for from dia 100 mm to 300 mm
6
-
-
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS:1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone, aggregate 20 mm nominal size) complete as per design.
64
-
-
Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete : Serrated with central bulb (225 mm wide, 8-11 mm thick)
104.4
-
-
CONSTRUCTION OF PUMP ROOM
-
-
-
RCC: Providing and laying in position machine batched and machine mixed design mix M 30 grade cement concrete for reinforced cement concrete work,using cement content as per approved design mix, ncluding pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS:9103 to accelerate, retard setting of concrete,improve workability without impairing strength and durability as per direction of Engineer- in -charge. All works above plinth level upto V level
5
-
-
Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum)
5
-
-
Centering and shuttering including strutting, propping etc., and removal of formwork Lintels, beams, plinth beams, girders, bressumers and cantilevers
40
-
-
centering and shuttering including strutting, propping etc., and removal of formwork. Suspended floors, roofs, landings, balconies and access platform
47.16
-
-
Steel reinforcement for RCC work including straightening,cutting,bending, placing in position and binding all complete above plinth level.TMT bars
300
-
-
Masonry work: Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to
floor two level with thickness 15cm in: CM 1:6 (1 cement : 6 coarse sand) etc complete
5
-
-
Joineries: Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :Powder coated aluminium (minimum thickness of powder coating 50 micron) for frames
40.32000000000001
-
-
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber /neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron)
43.74
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness
13.32
-
-
Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. 10 x 120 mm
64
-
-
Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineerin-charge complete. 255 X 19 mm
48
-
-
Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. Powder coated minimum thickness 50 micron aluminium
24
-
-
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width
48
-
-
Supplying and fixing of rolling shutter of approved make of required size M.S laths ,interlocked together through their entire length and jointed together at the ends by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454-partI and M.S. top cover of required thickness for rolling shutters. 80 x 1.25 mm MS laths with 1.25mm thick top cover
10.379999999999999
-
-
Providing and fixing ball bearing for rolling shutters
10.379999999999999
-
-
Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bars instead of laths as per design approved by Engineer -in -charge
10.379999999999999
-
-
Finishing: Cement plaster with fine M-Sand of 12mm thick using cement plaster of mix of 1:6 for interior walls
203
-
-
Cement plaster with fine sand of 6mm thick using cement plaster of mix of 1:3(ceiling)
48
-
-
Cement plaster with fine sand of 12mm thick using cement plaster of mix of 1:4 for exterior walls
25
-
-
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer
48
-
-
Finishing walls with water proofing cement paint of required shade :
New work (Two or more coats applied @ 3.84 kg/10 sqm)
155.4895
-
-
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over
and including priming coat of exterior primer applied @ 2.20
kg/ 10 sqm) for exterior walls.
155.4895
-
-
Applying Priming coats with Primer of approved brand and manufacture, having low VOC content (volatile organic compound),with ready mixed red oxide zinc chromatic on steel works having low VOC content less than 250 gm/litre.
24.912
-
-
Painting with synthetic enamel paint VOC (volatile organic compound) content less than 150 gm/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
24.912
-
-
Providing gola 75x75 mm in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 stone aggragate 10mm and down gauge0, including finishing with cement mortar 1:3 as per standard design.
8.92
-
-
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
33.3
-
-
DOMESTIC PUMPS
-
-
-
Supply, installing, testing and commissioing of 3 Nos. Centrifugal pump (2 W + 1S ) for pumping domestic water from collection sump to the OH tank . The pump shall be coupled to adequate H.P. electrical motor, mounted on a common base frame. The pump shall be suitable for the following requirements: Flow rate of each pump - 60.00 Cu.m / hr. Head - 20 Mtr. Supply:
1
-
-
Same as above but for Fixing:
1
-
-
Suitable indoor wall mounting type control panel with auto / manual change - over switch including dry run protection arrangement, wiring upto panel, earthing etc. complete. Supply:
1
-
-
Same as above but for Fixing:
1
-
-
Industrial type electronic liquid level controllers with stainless steel probes / sensors or float switch for automatic operation. Supply:
1
-
-
Same as above but for Fixing:
1
-
-
1 no. pressure gauge 4" dial with valve tee and fittings. Supply:
1
-
-
Fixing:
1
-
-
3 nos. cast iron lever operated slim seal type butterfly valves of CI body and spheroidal graphite iron disc (SG iron),with nitrile rubber seal, tested to 10 kg / sq.cm Confrming to BS 5155 / MF6 standards and including a set of GI flanges as per BS-10 table 1 including bolt nuts, GI washers, and neoprene rubber gaskets Complete etc., (inter valve / audco make) on the delivery side Supply:
1
-
-
Same as above but for Fixing:
1
-
-
3 nos. slimseal flap type check valve with CI body and cast steel disc pressure rating PN-10 Kg / sq.cm including a set of GI flanges as per BS-10 table 1 including bolt nuts, GI washers, and neoprene rubber gaskets Complete etc., (inter valve / audco make) on the delivery side. Supply:
1
-
-
CONSTRUCTION OF ETP
-
-
-
Planning, Designing, Engineering, Construction, Procurement, Installation, Testing & Commissioning of proposed 60 KLD Effluent Treatment Plant (ETP) including coarse screen chamber, collection sump with ozanisation facility, pumping machinery, DAF, Anoxic tank, areation tank (MBBR), sludge settling tank, clear water tank, pressure sand filter, activated carbon filter, treated water tank (20KL capaity), sludge drying bed, or any other structure / component required for smooth and efficient functioning / performance of the plant, etc.
The job includes all civil, electro mechanical and instrumentation works required for the ETP for its functioning and smooth operation. The ETP shall be designed for the parameters and design as mentioned in the technical specifcations.
1
-
-
CONSTRUCTION OF STP
-
-
-
Designing, Engineering, Construction, Procurement, Installation, Testing & Commissioning of proposed 10 KLD Sewage Treatment Plant (STP) skid mounted type in MSEP ( mild steel with expoxy painted) construction. The outlet of the treatment plant shall confirm KSPCB and CPCB norms as per guidelines.
1
-
-
INTERNAL ELECTRIFICATION WORK
-
-
-
WIRING: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required..
61
-
-
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
14
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).
20
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required
2
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
50
-
-
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
100
-
-
4 X 4 sq. mm + 2 X 4 sq. mm earth wire
50
-
-
Supplying and fixing DP sheet steel enclosure on surface/
recess along with 25/32 A, 240 V “C” curve DP MCB complete
with connections, testing and commissioning etc. as required.
2
-
-
Supplying and fixing 20 A, 240 V, SPN Industrial type socket
outlet, with 2 pole and earth, metal enclosed plug top alongwith
20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface
or in recess, with chained metal cover for the socket out let and
complete with connections, testing and commissioning etc. as
required.
2
-
-
Low Current System: Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 pair
200
-
-
10 pair
35
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket outlet
12
-
-
RJ45 WITH COVER
4
-
-
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mm X 75mm)
16
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm
250
-
-
Supplying and fixing Krone connectors of the following sizes in recessed GI/ Cadmium plated MS box fixed in the wall including making connections etc as required. 15 pair
2
-
-
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required.
60
-
-
Supply, installation, testing and commissioning of following port data switches with rack, the rate shall be inclusive of all required civil works, Make: Netgear/Digilink 15 PORT
2
-
-
Fittings & Fans: Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
30
-
-
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
14
-
-
Supplying and fixing extra down rod of 10 cm length G.I. pipe ,15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
14
-
-
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep
12
-
-
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
12
-
-
Installation, testing and commissioning of 70W MH Highbay fixture with suitable brackets by using 25x25x3 MS angle
5
-
-
Installation, testing and commissioning of 250 Flood Light fixture
10
-
-
Distribution Boards: Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
36
-
-
Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 amps
6
-
-
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2 + 6 way/ 8 way , Double door
2
-
-
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps
4
-
-
Supply and fixing of following way, horizontal type three pole and neutral, sheet steel, CB distribution board, 415V, on surface/recess, complete with tinned copper busbar, neutral bsbar, earth bar, din bar, interconnections, power painted including etc. as required. (But without MCB/RCCB/Isloator) 8 way (4 + 24), Double door
2
-
-
Main Boards: Supply, erection, testing and commissioning of floor /wall mounting type distribution board. The DB shall comprise of Al bars as applicable, bus bars of adequate size, brass neutral link, earthing with suitable number of taps. The incoming/outgoing cable entry shall be designed according to ACB/MCCB/SFU's rating. The cable entry/gland plate shall be at bottom/top. The gland plate shall be removable and 3mm thick. The enclosure shall be of 2mm thick CRCA sheet steel. The colour shade shall be RAL7032. The lighting distribution boards shall have two door type. The mounting channels of adequate size to be provided. The complete board shall be manufactured as per the standard practice and shall meet the requirements of other relevant authorities. This including all components, hardware's, all connected civil works etc.The contractor to submit vendor's general arrangement & scheme drawings along with CPRI certificate and approval & manufacturing clearance to be obtained for engineer in-charge MAIN PANEL: Supply and MS fabrication of main Panel
Sheet: 14/16 SWG CR sheet
Paint : Siemen’s grey with powder coating
RYB Phase Indication Lamps Ideal Make - 3NOS
Digital Multi Function Meter -1 NOS
Current Transformer630/5A 15VA class 1 - 3 NOS
Busbar Support : SMC
Busbar size :630A,TPN,3phase,4 WIRE AL . BUS, 35kA
EB Incomer
630A 4P MCCB - 1nos, (microprocessor based magnetic release MCCB, 35kA) Outgoing
315A 4P MCCB - 3 nos, 200A 4P MCCB - 1 nos, 160A 4P MCCB - 2 nos, 100A 4P MCCB - 2 nos with followings, Energy meter shall be provided with RS 485 port and communication wiring shall be done for software integration & aluminium busbar, interlocks, base channel, control and power wiring, indicating multifunction meter, O/C, UV/OV, E/F relay etc
1
-
-
MDB 1: Supply and MS fabrication of PDB Panel
Sheet: 14/16 SWG CR sheet
Paint : Siemen’s grey with powder coating
RYB Phase Indication Lamps Ideal Make - 3NOS
Digital Multi Function Meter -1 NOS, suitable energy meter - 1 nos
Current Transformer 400/5A 15VA class 1 - 3 NOS
Busbar Support : SMC
Busbar size :400A,TPN,3phase,4 WIRE AL . BUS
EB Incomer
315A 4P MCCB - 1nos, DG Incomer 315A 4P MCCB - 1 nos with microprocessor controlled auto transfer switch with suitable interlock including required safty accessories relays etc Outgoing
200A 4P MCB - 2 nos
160A 4P MCCB - 2 nos 100A 4P MCCB - 2 nos 63A 4P MCCB - 3 nos
2
-
-
APFC Panel: Supply and MS fabrication of APFC Panel
Sheet: 14/16 SWG CR sheet
Paint : Siemen’s grey with powder coating
RYB Phase Indication Lamps Ideal Make - 3NOS
Digital Multi Function Meter -1 NOS
Current Transformer 200/5A 15VA class 1 - 3 NOS
Busbar Support : SMC
Busbar size :200A,TPN,3phase,4 WIRE AL . BUS
Incomer
160A 4P MCCB - 1nos Outgoing - 90 kVAR (8 stages capacitor bank with different ratings, with auto/manual selector switch, suitable duty contactor, reactor, MCB's and ON OFF push buttons with required accessories etc)
1
-
-
Cabling: Supplying of PVC insulated, heavy duty, aluminium conductor. 1.1KV grade armoured. MV cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970. 3.5Cx400Sqmm Ar, Al.
75
-
-
3.5Cx120Sqmm Ar, Al.
60
-
-
4Cx25Sqmm Ar, Al.
50
-
-
4Cx16Sqmm Ar. Al
-
-
-
4Cx10Sqmm Ar, Al.
60
-
-
4Cx6Sqmm Ar, Al.
50
-
-
4Cx4 Sqmm CU Ar
90
-
-
Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground including excavation,sand cushioning, protective covering and refiling the trench etc as required. Upto 35 sq. mm
150
-
-
Above 95 sq. mm and upto 185 sq. mm
20
-
-
Above 185 sq. mm and upto 400 sq. mm
40
-
-
Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size in the existing mansonry open duct as required Upto 35 sq. mm
20
-
-
Above 95 sq. mm and upto 185 sq. mm
10
-
-
Above 185 sq. mm and upto 400 sq. mm
10
-
-
Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on wall surface as requires Upto 35 sq. mm (clamped with 1mm thick saddle)
50
-
-
Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
10
-
-
Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on cable tray as required. Upto 35 sq. mm (clamped with 1mm thick saddle)
80
-
-
Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
20
-
-
Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm
MS flat clamp)
20
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 400 sq. mm (82mm)
12
-
-
3½ X 120 sq. mm (45mm)
4
-
-
4C X 25 sq. mm (28mm)
4
-
-
4C X 16 sq. mm (28mm)
8
-
-
4Cx10Sqmm (25mm)
8
-
-
4Cx6Sqmm
-
-
-
4 X 4 sq. mm
10
-
-
CABLE TRAY: Supplying and installing following size of perforated painted with power coating M.S. cable trays with perforation not more than 17.5% is in conveient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 100 mm width X 50 mm depth X 1.6 mm thickness
-
-
-
150 mm width X 50 mm depth X 1.6 mm thickness
15
-
-
300 mm width X 50 mm depth X 1.6 mm thickness
10
-
-
EARTHING: Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
10
-
-
Providing and fixing 50 mm x 6 mm GI strip on surface or in recess for connections etc. as required.
75
-
-
Providing and fixing 25 mm x 3 mm GI strip on surface or in recess for connections etc. as required.
50
-
-
LIGHTNING ARRESTER: Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
2
-
-
Fixing of lightning conductor finial (single prong) with base plate
including holes etc. complete as required.
2
-
-
Jointing copper / G.I. tape (with another copper/ G I tape, base
of the finial or any other metallic object) by riveting / nut bolting/
sweating and soldering etc. as required.
8
-
-
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or
on surface of wall for lightning conductor complete as
required.(For horizontal run)
50
-
-
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or
on surface of wall for lightning conductor complete as required.
(For vertical run)
50
-
-
Providing and fixing testing joint, made of 20 mm X 3 mm thick
G.I. strip, 125 mm long, with 4 Nos. of G.I. bolts, nuts, chuck
nuts and spring washers etc. complete as required.
10
-
-
Providing and laying G.I. tape 32 mm X 6 mm from earth electrode
directly in ground as required.
20
-
-
Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.
8
-
-
SAFETY ITEMS: Supplying of non skid rubber mat 12mm thick and 900 mm width.
6
-
-
Supplying of fire bucket painted red & approved quality (set of 4 buckets).
2
-
-
Supplying and fixing danger plate 440 volts written in two languages.
5
-
-
supply and fixing carbondi oxide fire extinguisher type 4.5 kg capacity.
2
-
-
Supplying of first aid box.
1
-
-
supplying and fxing of shock treatment chart.
2
-
-
Hand gloves suitable for 415 V
2
-
-
SUPPLY OF FITTING & FANS: 70W LED high fixture LED
5
-
-
1 x 28W LED fitting
30
-
-
1X250W Flood light fixture
10
-
-
1200mm sweep double ball bearing ceiling fan Make:Almonard/Usha
14
-
-
Light Duty Exhaust fan in metal frame working on 230 V A/C 300 / 305 mm sweep
12
-
-
MV SWITCH GEAR - TRANSFORMER: S.I.T.C of suitable for Indoor type 400kVA, 11/0.433kV Dry, Air cooled, Fully encapsulated, Cast Resin Type Indoor transformer including all accessories. Transformer shall be suitable for continuous Operation with a frequency variation of ±3% from normal 50 c/s without exceeding the specified temperature rise. Average winding temp rise by resistance method above 50ºC max. ambient shall not exceed 140ºC(With or without Enclosures) with a maxm. permissible hot-spot temp. of 30ºC over and above specified temperature rise limit for that particular class of insulation. The vector group DYN11. The py shall be suitable for 1#3C x 120Sqmm 11KV Al, Ar cable and Sy shall be suitable for 3Runs of 3.5Cx400sqmm cable. Painting shall be carried out as per IS,impedance of the transformer shall be as per IS. Rate shall be for the complete Transformer with connected civil works etc. The contractor to submit vendor's general arrangement & scheme drawings and approval & manufacturing clearance to be obtained for engineer in-charge
1
-
-
HT CABLING: Supplying of XLPE insulated, heavy duty, aluminium conductor. 11KV grade armored. MV cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970 Make: Polycab/Finolex 11KV Grade, 3Cx120Sqmm Ar, Al.
60
-
-
Supply, installation, testing and commissioning of Cable End termination for following size XLPE complete, double compression gland for indoor type and Heat shrinkable termination kit for outdoor type 11KV (E) grade, 3 core 150 sqmm XLPE cable with double compression gland (Indoor type )
4
-
-
Laying of one number of PVC Insulated and PVC sheathed / XLPE power cable of 11KV grade of following size direct in ground including excavation,sand cushioning,protective covering and refilling the trench etc. as required Upto 120 sq. mm
40
-
-
Laying of one numberof PVC Insulated and PVC sheathed / XLPE power cable of 11KV grade of following size in the existing RCC/HUME/METAL pipe as required Upto 120 sq. mm
10
-
-
Laying of one numberof PVC Insulated and PVC sheathed / XLPE power cable of 11KV grade of following size in the existing masonary open duct as required Up to 120 Sqmm
10
-
-
Suppervising charger for EB
1
-
-
Liaison Charge for local EB and CEA approving authorities
1
-
-
DG - 185 kVA (with AMF panel): Supply, erection, testing and commissioning of the following capacity 415V DG's shall have in-built or separate AMF panel, diesel tank, AVP, acoustic enclosures shall cater to the allowable dB level as per statutory norms. The enclosure shall be fully weather proof to meet IP55, the engine shall be four stoke, 1500RPM, designed for operating in high speed diesel, water cooled type. Suitable civil foundation shall be part of the job. The entire job shall fulfill CPCB / any statutory norm. Supply, erection, testing and commissioning of suitable capacity diesel tank including level monitor, the tank shall be located closer to the DG, it shall be mounted on structural platform. The tank and the DG shall be properly connected by pipe lines including valves, flame proof motors, the pipe lines shall be supported properly. The drawings showing the entire arrangements shall be submitted and obtain approval from owner/consultant. Design, drawings, supply, erection, testing and commissioning of exhaust chimneys, required stack, Silencers required civil/structural/painting works, obtaining approval & necessary certificate from authority. exhaust chimney shall be taken above the building and upto suitable heights conforming to the statutory regulations by Environment authorities. The chimney shall be self supporting with all necessary civil / structural/paintings works. For exact locations of the DG shall be referred in the respective layouts The contractor to submit vendor's general arrangement & scheme drawings and approval & manufacturing clearance to be obtained for engineer in-charge
2
-
-
PLUMBING AND SANITARY WORKS
-
-
-
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required
4
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap
13
-
-
Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms
13
-
-
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete 40 mm dia
14
-
-
Providing and fixing uplasticised PVC connection pipe with brass unions at both ends 45 cm length- 15 mm nominal bore
18
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore
18
-
-
Providing and fixing C.P. brass two in one bib cock for abulution tap 15 mm nominal bore
14
-
-
Providing and fixing C.P. brass push cock 15 mm nominal bore
9
-
-
Providing and fixing C.P. brass health faucet of standard design with one metre long connecting flexible CP tube 15 mm nominal bore
4
-
-
Providing and fixing bevelled edge mirror of superior glass of 5.5mm thick of BELGIUM GLASS or any other equi-valent, 3mm thick felt backing or asbestos sheet backing or with wooden beads alround of specified size and fixed to wooden plugs with C.P. brass screws and cup washers etc.all complete as directed by Engineer-in-charge. size: 600 x 600 mm
4
-
-
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
4
-
-
Providing and fixing toilet paper holder : C.P. brass
4
-
-
Providing and fixing in position C.P. robe hook of Model and make as specifed and directed.
4
-
-
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
4
-
-
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outletgrating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern
2
-
-
Providing, laying and jointing SWR uPVC pipes of Type B as per IS 13592 of approved make for soil,waste and vent pipes with solvent joints including necessary fittings like bends, tees, Y, connection to sanitary fittings etc,including cutting and making good masonry or concretefloor, walls and testing of pipelines as per standard specifications, encasing the pipelines in 1:3:6 PCC, 150mm thick alround etc. all complete. (INSIDE TOILET): 110mm dia.
30
-
-
75mm dia
12
-
-
Providing and fixing uPVC floor trap with 75mm dia outlet of approved make including stainless steel grating on top of the trap of approved make etc. complete all as specified and directed
11
-
-
Providing and fixing uPVC multi floor trap 110mmdia, 75mm dia outlet of approved make including connection of waste pipe line from wash basin with tail piece or boss tee, stainless steel grating on top of the trap of approved make etc. complete all as specified and directed
4
-
-
Providing and fixing of Chilly make cockroach trap of model no as specified in list of makes etc all complete as per standards specifications.
17
-
-
Providing and fixing cast brass clean out plug with suitable insert keys for opening male threaded plug jointed to GI socket caulked to soil and waste pipes as required etc.complete 63 mm dia
2
-
-
Providing and laying half round 200 dia PVC pipe 10kg/sqcm for drainage inside the processing hall including excavation, covering with slotted SS grating 304 grade.
33
-
-
Providing and fixing SS grating 304 grade 200 mm dia for Process Area including fixing with the drinage PVC pipe. 200 mm dia constructing chamber etc complete.
8
-
-
Fabrication, supplying and fixing in position GI brackets with 2 nos of 25 x 6mm thick MS flats of required length with legs of 60mm x 6mm MS flat of required length including welding and fixing in position with anchor bolts / in CC block of 200mm x 200mm x 200mm in CC 1:2:4 as approved by Consultant etc all complete
6
-
-
providing and fixing PVC vent cowl 110 mm dia with SS mosquito mesh
6
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer
in Charge. 32mm nominal bore
150
-
-
Same as above but for 25mm nominal bore
60
-
-
Providing and fixing cPVC pipes of SDR 11 of approved make as per list of makes withnecessary fittings such as bends,elbows, tees,sockets, unions, plugs etc.with brass screwed fittings for fixing CP fittings, fixing with suitable M.S bracket/ clamps/hangersincluding testing thepipelines as perspecifications, cutting and makinggood the walls,etc all complete excluding the cost of MS brackets which shall be paid extra . Concealed work, including cutting chases and making good the walls
etc.(INSIDE THE TOILETS FOR POTABLE WATER PIPELINE) 20mm nominal bore
35
-
-
Same as above but for 25mm nominal bore
8
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed end) : 25mm nominal bore
5
-
-
Same as above but for 32mm nominal bore
7
-
-
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore
3
-
-
Disinfecting of water mains with 50 ppm of chlorine solution and then flushing the entire pipeline with water etc. all complete as per standard specifications and directed by Engineer-in-charge 20mm nominal bore
-
-
-
Same as above but for 25mm nominal bore
-
-
-
Same as above but for 32mm nominal bore
125
-
-
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All types of soils: Exceeding 80mm dia but not exceeding 200mm dia
60
-
-
Providing and fixing rainwater C.I grating over PVC of dia. As mentioned below 110mm dia (6 kg/sqcm)
4
-
-
EXTERNALSEWERAGE :-Excavating trenches of required width for pipes including excavation for sockets and dressing of sides, ramming of bottoms, depth up to 1.5m including getting out the soil as required and refilling, consolidating in layers, and transport stacking neatly the surplus excavated soil within a lead of 50M all complete. All types of soils Exceeding 80mm dia but not exceeding 300mm dia
200
-
-
Providing and laying plain cement concrete 1:3:6 using 40 mm stone aggregate and coarse sand , for encasing sewer pipes at all depths etc. all complete for 110 mm dia.PVC pipe
8
-
-
Providing and fixing PVC pipes, including all fittings. This includes jointing of pipes & fittings with one step PVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. 110mm dia. 6kgf/sq.cm
200
-
-
Construction brick masonry manhole as per standard design in cement mortar 1:3, foundation concrete 1:2:4 , 150mm thick, inside and outside plastering 12mm thick with cement mortar 1:2 finished with a floating coat of neat cement and making channels in cement concrete M15 neatly finished, top RCC cover including reinforcement for heavy loads, polypropylene steps, earthwork excavation, getting out the excavated soil and returning the suitable soil as required for refilling, consolidating and disposal of surplus excavated soil within a lead of 50m etc. all complete including heavy duty SFRC cover and frame as per IS etc all complete as per specifications and as directed by the engineer incharge. 600x600x600mm inside dimension with150mm thick RCC slab M20 grade with 230 thick side walls
8
-
-
Same as above but for 800x800x750mm inside dimension with 150mm thick RCC slab M20 grade with 230mm thick side walls
7
-
-
Extra for depths more than 600mm and up to 750mm for 600x600mm chambers with side walls of 230mm thick
2
-
-
Extra for depths more than 750mm and up to 1000mm for 800x800mm chambers with 230mm thick side walls
2
-
-
Providing and fixing grade "A" P or S type 150mm square mouth stoneware gully trap with 100mm dia. Outlet of Mysore/TSL make with castiron grating housed in 230mm thick block masonry chamber and water tight cast iron cover with frame of 300x300mm size (inside) as per standard design and drawing including necessary excavation and backfilling all complete.
6
-
-
FIRE PROTECTION SYSTEM
-
-
-
EXTERNAL HYDRANT SYSTEM : Supplying, installing, testing and commissioning of M.S Pipes Heavy grade, Class-C, ERW confirming to IS 1239 Pt - I (above ground pipe) with suitable type of supports (Shall be fabricated by M.S. Channel / Angle / Flat for above 50 mm dia), anchor fasteners, bolts, nuts, clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, . The quoted rate shall also include for chasing / chipping walls, making bore holes in walls and making them good with filler material. The above ground pipe shall be painted with one coat of zinc chromate / red oxide primer and two coats of synthetic enamel paint of fire red colour as per IS 5 shade 536. The pipe fittings shall be butt weld type for 50NB and above and socket weld /screwed type for 40NB and below pipes. 80mm nominal dia
15
-
-
Supply, Installing, testing and commissioning of Heavy class M.S pipe, Class-C ERW (as per IS-1239 Part-1) laid in under ground (1 Mtrs below ground level). The quoted rate shall includes necessary specials like long radius bends, tees, including cutting, welding / flanged joints with necessary washers, nuts, bolts, etc. also include for providing concrete anchor blocks at all change in direction of pipeline if necessary and also near each joints. The quoted rate shall includes Wrapping & Coating of Under ground M.S. Heavy Grade Pipe -This corrosion protection tape shall comprise coal tar component supported on fabric of organic (or) inorganic fibre and minimum 4mm thick and shall conform to requirement of IS:10221 code of practice for coating and wrapping of under ground pipes line. The wrapping & coating tape to be cut to 200mm wide and wounding on pipe. Minimum 2.8m tape of 200mm wide per 150mm pipe shall be considered.150mm nominal dia pipe
-
-
-
Same as above but for 80mm nominal dia
37
-
-
Supplying, Installing, testing and commissioning of C.I. butterfly valves conforming to BS 5155 (PN 1.6) slim seal standard lever operated type with required flanges, nuts, bolts etc. complete. 150mm nominal dia
5
-
-
Supplying, erecting, testing and commissioning of external Yard Hydrant and monitor system : Single headed oblique type ground faced hydrant valve conforming to IS 5290, made of gunmetal with 63 mm dia instantaneous outlet of 80 mm dia fanged inelt ,Blank caps , chain and CI hand wheels etc complete.
7
-
-
15 M long, 63mm dia RRL hose conforming to IS 636 Type A with instantaneous couplings and Hoses shall be stored inside the hose cabinet.
6
-
-
Gun metal short branch pipe with nozzle conforming to IS 903.
5
-
-
M.S. Hose cabinet, stand mounted type fabricated out of M.S. sheet of 16 swg. with glass fronted (4mm thick glass with rubber beeding) door and size of the cabinet shall be 600mm x 750 mm x 250 mm. Quoted rate shall be includes suitable stand for mounting, all fasteners etc, and cabinet shall be powder coated of approved colour both inside and outside.
3
-
-
Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes
including collars/spigot jointed with stiff mixture of cement mortar in the
proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 450mm nominal dia
18
-
-
MANUAL FIRE ALARM SYSTEM : Supplying, installing, testing and commissioning of conventional electronic Hooter with base
2
-
-
Supplying, installing, testing and commissioning of Manual call point (break glass type) with back box
2
-
-
Supplying, installing, testing and commissioning of 2 core x 1.5 mm², armoured, FRLS outer Sheathed PVC insulated copper conductor Cable to connect all fire alarm devices into FACP.
300
-
-
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.25 mm dia
125
-
-
P.A. SYSTEM Supplying, installing, testing and commissioning of 12 W wall mounted type speakers in typical apartment floors.
2
-
-
Supplying, installing, testing and commissioning of 2 core x 1.0 sq. mm, annealed tin copper conductor, armoured FRLS outer sheathed PVC insulated Cable confirming to IS 1554 Part-1.
200
-
-
FIRE EXTINGUISHERS: Supplying, installing and commissioning Portable Fire extinguishers of following type & capacity. ABC powder type fire extinguisher of 6 Kgs. Capacity,Mono Ammonium Phospate Powder 90%, Stored pressure type, Pressure Gauge, Controllable discharge mechanism with Hose & Nozzle etc. Complete. Confirming to IS:15683
12
-
-
SIGNAGES: Providing and installing in position the following tupe of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut. PVC non-reflective self adhesive vinyle painted foam board, complete with mirror fasteners. Providing and fixing in position the signage of " Fire Extinguisher " to be pasted immediately above the every extinguisher. Size 6" x 8"
12
-
-
Same as above but for Providing and fixing in position the sign board In case of Fire Break the Glass- with Manual call Point symbol. Size 6" x 8"
2
-
-
Providing and fixing in position the sign boad of " EXIT " with arrow to be placed at parking levels by hanging on ceiling to direct cars / occupants to outside the building in an emergency. The exit sign board will be auto glow (photoluminiscent) type which will glow at dark. The size of signage shall be minimum 8"x 16"
3
-
-
CIVIL WORKS: Excavating trenches of required width for pipes, cables, etc including
excavation for sockets, and dressing of sides, ramming of bottoms,
depth upto 1.5 m, including getting out the excavated soil, and then
returning the soil as required, in layers not exceeding 20 cm in depth,
including consolidating each deposited layer by ramming, watering,
etc. and disposing of surplus excavated soil as directed, within a
lead of 50 m : Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
150
-
-
Constructing masonry Chamber 120x120x100 cm inside, in
cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I.
surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm
deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary
excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded
stone aggregate 40 mm nominal size) and inside plastering with cement
mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating
coat of neat cement complete as per standard design. With solid block masonry of size 30x20x20 cm.
4
-
-
FIRE PUMP ROOM EQUIPMENT: Supplying, installing testing and commissioning of electrical motor driven Main (Hydrant) Pump of horizontal centrifugal end suction backpull out type with gland packing and capable to deliver 2280LPM (137 m³/ Hr) at 70 MWC with all necessary accessories like bronze impeller, stainless steel shaft along with anti-vibration mounting, coupling, coupling guard and base plate for pump, fabricated mild steel channel,foundation bolts, and pump should have the dry run sensor provision, etc., as per local fire brigade requirement . The pump shall capable to have 3.5 kg/cm² residual pressure at top most hydrant point. The pump shall be coupled to electrical motor of 50 KW (67 HP) with speed of 2900 RPM, Electric supply 415V, 50 Hz and complete set shall be mounted on a common base frame. The quoted rate shall includes providing & fixing of coupling, coupling gaurd and Foundation bolts etc.
1
-
-
Supplying, installing and commissioning of Diesel Engine driven common stand by pump, horizontal centrifugal end suction backpull out type with gland packing and capable to deliver 2280LPM (137 m³/ Hr) at 70 MWC with all necessary accessories like bronze impeller, stainless steel shaft along with anti-vibration mounting, coupling, gear box, base plate for pump, fabricated mild steel channel with foundation bolts etc., It includes providing and fixing fuel oil tank (capacity as perTAC requirements) with supports and necessary pipe works for diesel engine, battery and battery charger to be connected to control panel of diesel engine and exhaust silencer including necessary pipe work and lagging, pump should have the dry run sensor provision, etc., and shall be automatic in operation with diesel engine control panel with 24V DC storage battery & its battery charger with required Ampere - hour rating, terminal box (2 nos. of 12volts), cooling water line for engine with required pipes / valves / fittings etc., as per TAC including all associated electrical works. The pump shall capable to have 3.5 kg/cm² residual pressure at top most hydrant point. The pump shall coupled to Diesel engine, radiator water cooled type with speed of 1800RPM and complete set shall be mounted on common base frame. Batteries & battery leads with stand, 200 liters capacity Fuel tank ( for 6 Hrs. operation ) with stand & gauge glass, Fuel piping with valves. The quoted rate shall includes radiator water cooling piping (if required) coupling gaurd and other stanadrd accessories and foundation bolts, etc. complete. (the cost for interlock arrangement between main and diesel engine pumps to be included in this item price)
1
-
-
Supplying, installing and commissioning of electrical motor driven Jockey pump of horizontal centrifugal end suction backpull out type with gland packing and capable to deliver 180LPM (10.8 m³/ Hr) at 70 MWC with all necessary accessories like bronze impeller, stainless steel shaft along with anti-vibration mounting pad and flexible connections at discharge end of the pipes, pump should have the dry run sensor provision etc. and shall be automatic in operation.The pump shall be coupled to motor of 15 HP with speed of 2900RPM and complete set shall be mounted on common base frame. The quoted rate shall includes providing & fixing of coupling, coupling gaurd and Foundation bolts etc.
1
-
-
Supply, erection, testing & commissioning of electrical motor driven Booster pump of Monoblock type capable to deliver 450 LPM at 35MWC.The pump shall be coupled to motor of suitable 10 HP and 2900 RPM with complete set shall mounted on common base frame. ( as recommended by manufacturer) and Foundation bolts etc.
1
-
-
Control Panel for Fire pumps: Fabrication, Supplying, Installation, Testing & Commissioning of MCC control panel for main & jockey pump of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection, having switchgears and accessories mounting and internal wiring, earth terminals, numbering etc. complete in all respects, suitable for operation on 415 V, 3 phase, 50 HZ. AC supply with enclosure protection class IP 42 as required. INCOMER (a) 200 Amps. TP&N SFU with HRC fuses
(b) Voltmeter (0-500 Volts) with selector switch.
(c) Ammeter (0- 400Amps.) with selector switch & CT's etc.
(d) Set of 3 Phase indicating lamp. (e) Set of AJ.bus bar Amps. OUTGOING. (a) Hydrant pump.
125 Amps.TP&N SFU with HRC fuses with 110 HP fully automatic star/ delta starter with over load protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFFoperation. (c) Jockey pump.
32 Amps. TP&N SFU with HRC fuses with 15 HP fully automatic DOL starter with over load protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation,selector switch for local/remote,auto/manual/OFFoperation.
1
-
-
Diesel Engine Control Panel for Diesel Engine comprising:-
(i) Auto/Manual selector switch & 3 attempt starting device, timers and relays as required, push buttons, start/stop in manual mode.
(ii) Indication lamp for High/Low Lub.oil pressure, High Water Temp.and Engine ON indication.
(iii) Battery charger suitable for 12 V/ 24 V DC with boost and tickle selector switch, 0-30 V DC'volt meter, 0-20A DC Ammeter.
(iv) AII standard relays and accessories for automatic operation of diesel engine.
1
-
-
Booster pump control panel : (at terrace 32 Amps. TP&N SFU with HRC fuses with 10 HP fully automatic DOL starter with over load protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation,selector switch for local/remote,auto/manual/OFFoperation.
1
-
-
1.1 KV GRADE POWER / CONTROL CABLES: Supplying, laying, testing & commissioning of FRLS, PVC outer sheateh, steel armoured, aluminium / copper conductor, 1.1 KVgrade power cables with glands etc.The cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc. as required. For cables laid out door the rate shall include earth excavation providing brick and sand protection, refilling and compacting the earth.The rate shall excludes tray & Hume pipes. The quoted rate shall includes the end termination for 1.1KV cables with double compression type cable gland and heavy duty tinned copper cable sockets as per the relevant IS standards. Rate shall be inclusive of all sundry materials like adhesive tape , PVC sleeves , bolts and nuts, washers etc. including plugging unused holes. Above 10 mm² shall be aluminium conductor type. 2R x 3.5 Core x 35 mm² Aluminium conductor cable for electrical motor driven main pump
20
-
-
Same as above but 4 Core x 16 mm² aluminium conductor cable for jockey pump & booster pump
35
-
-
Same as above but 12 Core x 1.5 mm² copper conductor cable for diesel engine pump
20
-
-
Same as above but 2 Core x 1.5 mm² copper conductor cable for pressure switch
40
-
-
Same as above but 4 Core x 2.5 mm² copper conductor cable for MCC to ESP interlocking
20
-
-
Supplying and fixing of perforated G.I.sheet cable tray with neccessory angle iron suspension supports, anchor fasteners etc. complete. Maximum height of suspension shall not exceed 500 mm.Size of the tray shall be suitable for laying the above mentioned cables. The minimum cable tray size shall be 300mm x 75 mm depth.
40
-
-
G.I. Earthing strips of 50mm x 6mm thick, strip shall be run on floor / ceiling / walls, from the equipment to the nearest Earth pit with neccessory accessories as required. (Earth pit shall be executed by other agencies).
30
-
-
Supplying, installing, testing and commissioning of G.I Pipes Heavy grade, Class-C, ERW confirming to IS 1239 Pt - I for pipes Up to 150mm dia and IS: 3589 for pipes 200 mm dia and above with approved painting, suitable type of supports, anchor fasteners, bolts nuts (Galvanised), clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc,. The quoted rate shall also include for chasing / chipping walls, making bore holes in walls / floor and making them good with filler material etc. complete. 200mm nominal dia
12
-
-
Same as above but 150mm nominal dia
18
-
-
Same as above but 100mm nominal dia
18
-
-
Same as above but 80mm nominal dia
6
-
-
Same as above but 50mm nominal dia
12
-
-
Same as above but 25mm nominal dia
24
-
-
Supplying, installing, testing and commissioning of C.I. Non-return valves conforming to IS:5312 (PN-1.6 rating), reflux swing check type with required flanges, nuts, bolts and gaskets etc. complete. 150 mm nominal dia
2
-
-
Same as above but 100 mm nominal dia (For priming )
1
-
-
Same as above but 80 mm nominal dia
1
-
-
Supplying, installing and commissioning of C.I. flanged foot valve strainer at suction side of each pump, with suitable flanges, nuts, bolts, gaskets etc. complete. 200mm dia.
2
-
-
Same as above but 100 mm dia.
1
-
-
Supply, Erection, Testing and commissioning of C.I. Sluice valves conforming to IS:14846 (PN-1.6 rating), Non rising spindle type complete with necessary flanges, bolts, nuts, washers, gasket and CI hand weel etc.150mm nominal dia
2
-
-
Same as above but 80mm nominal dia
1
-
-
Supplying and fixing approved make of 25mm dia automatic air release valve of single ball or spring loaded type complete with unions etc. complete.
1
-
-
Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type. 25mm nominal dia
1
-
-
REFRIGERATION SYSTEM
-
-
-
Designing, supplying, installing and Commissioning of Refrigeration system for Raw & Finished Chill room, Fish Processing Hall, as per the follwing details and technical specifications: The refrigeration system shall be operating with CFC free R404a Freon gas, split type of suitable capacity with Air Cooled Condensing Units located outside the rooms and the Evaporator Units located inside the rooms with interconnecting copper piping & cabling works. The Air Cooled condensing unit with the semi-hermetic compressor shall be of same make with the necessary controls like HP/LP,Oil pressure cut out and Oil seperator, Suction Accumulator, & Liquid line valves & Controls, Temperature Sensor & Thermostat (For Room Temperature Control) .Micro-processor based Electrical starter panel with the controller of Dixcell/Carrle make which will have BMS compactability for only Freezer room .The condensing units shall be worked with the maximum ambient conditions of 45 Deg C . The evaporator cabin shall be constructed using GI powder coated casing. All the refrigerant tubes shall be with copper construction & Al fins. The evaporator shall be provided with the minimum fins spacing of 6-7 mm to allow sufficient frost build up to enable longer operation hrs between defrost. Defrost shall be electric typefor chill room. The evaporator shall be Eurovent certified . The evaporator shall be provided with heaters for Coil,tray and Fans as the same are working under very low tempertaure applications.By considering the very high humid conditions of our area,we are proposed to have double tray with 20 mm insulation for the drain applications.
The expansion valves shall be of TEXV for precising the refrigerat flow to the evaporator based on the various load conditions.
Detailed design calculations showing the engineering design details to prove the capability of the refrigeration system to achieve the intended temperature and other parameters.
The job shall also include to supply and installing inside the chill rooms safety hooter with switch & first charge of refrigerant gas.
All the necessary electrical fixtures and Control panel board including all the switches, breaker and control points required for the refrigration system and Processing building should be propoerly designed and installed as per the IS standards. The quoted rate shall also to include all gurantees/warrantees for the all mechanical parts, works , training of clients technicians, supplying operating manuals etc. The rate shall include all taxes, duties, transpotaion charges, labour and handling charges etc
-
-
-
For Raw & Finished Chill Room : Designed Room temperature (+)2°C ± 2°C,Product to be stored: Fish's / Sea food,Quantity to be stored per Chill Room : 10MT (approx), No.of Chambers: 4 No's,Room Description: 4no's. of 4.0 x 4.5 x 5.0 m ( clear dimensions) insulated with 80 mm thick PUF insulation for Walls & Celieng with 0.5 mm PPGI/PCGI lamination & 80 mm thick PUF Slab for Floor insulation with 250 Micron Polythene sheet as vapor barrier. Doors- 4no's with suitable PVC Strip Curtains:1200 x 2100 mm , Single Leaf Swing Door (Face Mounted) 80 mm thick PUF insulation with 0.6 mm PPGI/PCGI lamination on both sides. PPGI wall frame on three sides, Raising hinges, Handle, Key lock, and Emergency release opener from inside, Heater arrangement in Door Frame & Floor Sill.Type of refrigeration system : Split Type ,Type of Cooling: DX Type ,Capacity of Refrigeration system [KW] : 12 kW per Chill Room,Type of Refrigerant: R404a,Type of compressor: Reciprocating Semi Hermetic type with Suitable Canopy for Condensing Unit,Type of Condenser: Air Cooled -4 no's (One for each Chill room)Type of Evaporator unit: Forced Air Cooled. 12 KW capacity, Four No's, One for each Chill room with GI Powder Coated casing, Copper tubes of suitable length, Aluminium fins. The evaporator unit will be Ceiling Mounted with suitable Air flow as per design requirement.
1
-
-
For Fish Processing Hall :Designed Room temperature (+)20°C ± 5°C Product to be processed : Fish / Sea food Room Description: 2 no's. of 11.50 x 15.28 x 5.0 m ( clear dimensions) insulated with 80 mm thick PUF insulation for Walls & Celieng with 0.5 mm PPGI/PCGI lamination. Doors : 1200 x 900 mm Chute Door -4 No's with suitable Air curtain , Single Leaf Swing Door (Face Mounted) 80 mm thick PUF insulation with 0.6 mm PPGI/PCGI lamination on both sides. PPGI wall frame on tFour sides for Chute door, Raising hinges, Handle, Key lock and necessary accessories.Type of refrigeration system : Split Type ,Type of Cooling: DX Type ,Capacity of Refrigeration system [KW] : 12 kW per Processing hall ,Type of Refrigerant: R404a / R134a / R407C,Type of compressor: Scroll type Hermetic compressor with Suitable Canopy for Condensing Unit,Type of Condenser: Air Cooled - 4 no's (Two for each Processing hall),Type of Evaporator unit: Forced Air Cooled. 6 KW capacity, Two No's for Fish processing Hall with GI Powder Coated casing, Copper tubes of suitable length, Aluminium fins. The evaporator unit will be Ceiling Mounted with suitable Air flow as per design requirement.
1
-
-
For Chemical Store : Chamber Size: 4.0 x 3.0 x 5.0 m ( clear dimensions) No. of Chamber : 1 No.Product to be stored: Dry & Wet Chemicals etc..Room Description: 1 no's. of 4.0 x 3.0 x 5.0 m ( clear dimensions) insulated with 80 mm thick PUF insulation for Walls & Celieng with 0.5 mm PPGI/PCGI lamination . Door: 1200 x 2100 mm Room Door -2 No & 1200 x 900 mm Chute Door -2 No's with suitable Air curtain (4 No's) , Single Leaf Swing Door (Face Mounted) 80 mm thick PUF insulation with 0.6 mm PPGI/PCGI lamination on both sides. PPGI wall frame on three sides for Hall door & Four sides for Chute door, Raising hinges, Handle, Key lock and necessary accessories.Flat Angled Rack System for Storage of Chemicals: A. No. of Bays: 4 No’s, B. Size of each Bay: 900 L x 450 D x 2450 H, C. No. of Panels (Shelves) in each Bay: 5 No’s, D. Size of each Panels (Shelve): 900 L x 450 D x 612 H, E. Total no. of Shelves ( 4bays x 5shelves) : 20 No’s, F. Load on each Shelve : 150 kg’s G. Load on each Bay : 750 kg’s
Material of construction: EN10025 – S235JR HR P&O
The uprights are Galvanized and Panels are Galvanized.
All racking components comply with the latest German safety regulation in DIN 18800.
The concrete of the floor will not have magnesite as a component to avoid the chemical reaction with the base plates, which will be galvanised.
All the fasteners will be galvanized
1
-
-
Designing, supplying, installing and Commissioning of Flake Ice Generator as per the follwing details and technical specifications: Flake ice Room is constructed with 80mm thick RPUF panel, Flake Ice generator should be made with Stainless Steel food grade quality freezing surface with machine accessories. Water Cooled condensing uint complete with shell & Tube Condenser with cooling tower/Evaporative type & Reciprocating/Screw type Semi-Hermetic/Open Compressor with suitable receiver and Control Panel. The refrigeration system shall be operating with CFC free R404a Freon gas, of suitable capacity with Water Cooled Condensing (Shell & Tube with Cooling Tower/Evaporative) Units located outside the rooms and the flake ice generator Units located inside the rooms with interconnecting copper piping & cabling works. The Water Cooled condensing unit with the semi-hermetic compressor shall be of same make with the necessary controls like HP/LP,Oil pressure cut out and Suction Accumulator, & Liquid line valves & Controls, Electrical Contral panel with the Complete system.The condensing units shall be worked with the maximum ambient conditions of 40 Deg C & The expansion valves shall be of TEXV/Electronic type for precising the refrigerat flow to the flake ice generator based on the various load conditions. GI Water Piping between cooling Tower to Condensing uint with necessery NRV, Strainers & Valves, Water pumps for water circulation.
Detailed design calculations showing the engineering design details to prove the capability of the refrigeration system to achieve the intended temperature and other parameters.
The job shall also include to supply and installing insulation to refrigeration suction piping along with GI/rubber cladding
All the necessary electrical fixtures and control panel board including all the switches, breaker and control points required for the refrigration system should be propoerly designed and installed as per the IS standards. The quoted rate shall also to include all gurantees/warrantees for the all mechanical parts, works , training of clients technicians, supplying operating manuals etc. The rate shall include all taxes, duties, transpotaion charges, labour and handling charges etc
-
-
-
Flake Ice Room ,Designed temperature (-)24°C to (-)27°C,Product: Flake Ice, Capacity: 10 MTPD ,Room Description: 1 no's. of 3.0 x 3.0 x 5.0 m ( clear dimensions) insulated with 80 mm thick PUF insulation for Walls & Celieng with 0.5 mm PCGI/PCGI lamination & 80mm thick PUF slab with 250 micron Polysheet as vapour barrier for floor Insulation . Door: 1200 x 2100 mm Room Door -1 No with suitable PVC strip curtain , Single Leaf Swing Door (Face Mounted) 80 mm thick PUF insulation with 0.6 mm PCGI/PCGI lamination on both sides. PPGI wall frame on three sides, & Raising hinges, Handle, Key lock and and emergency release opner from inside & floor Sill.Type of refrigeration system : Flake ice generator with Complete System ,Type of Cooling: DX Type ,Capacity of Refrigeration system [KW] : 64 kW X 1 No's ,Type of Refrigerant: R404a ,Type of compressor: Reciprocating /Screw type Semi Hermetic Compressor with Suitable Canopy for Condensing Unit,Type of Condenser: Water Cooled : Shell & tube/ Evaporative ,Flake Ice Thickness: 1.5mm to 2mm ,Flake Ice Generator with SS MOC Cooling Surface & Complete package with Control Panel.
1
-
-
SUPPLYING OF PRESONAL LOCKERS & SS TABLES: for Fish Processing hall & Men & Women dress Changing room as per the follwing details and technical specifications: WORKING TABLES:S.S.304 working tables to be used in Food Processing industry, As a part of the project, we need SS working Tables (hygienic design) . For manual grading and sorting, Processing of Fish’s prior to further processing. The design of S.S tables should be with water Pipe & 6 taps, drainage connection pipe / Broder for washing/draining and border. PERSONAL LOCKERS FOR CHANGING ROOM:
Manufactured by prime quality CRCA "cold rolled close annealed" Steel sheets Body and drawers made from 22 gauge steel sheets (0.8mm) Locking facility available with a duplicate key Card holder provided at the door Air- vent opening provided at the door Total 15 numbers of individual lockers The quoted rate shall also to include all gurantees/warrantees for the all mechanical parts, works , training of clients technicians, supplying operating manuals etc. The rate shall include all GST taxes, Insurance, transpotaion charges, labour and handling charges etc
-
-
-
SUPPLYING OF PRESONAL LOCKERS & SS TABLES: for Fish Processing hall & Men & Women dress Changing room as per the follwing details and technical specifications: WORKING TABLES:S.S.304 working tables to be used in Food Processing industry, As a part of the project, we need SS working Tables (hygienic design) . For manual grading and sorting, Processing of Fish’s prior to further processing. The design of S.S tables should be with water Pipe & 6 taps, drainage connection pipe / Broder for washing/draining and border. PERSONAL LOCKERS FOR CHANGING ROOM:
Manufactured by prime quality CRCA "cold rolled close annealed" Steel sheets Body and drawers made from 22 gauge steel sheets (0.8mm) Locking facility available with a duplicate key Card holder provided at the door Air- vent opening provided at the door Total 15 numbers of individual lockers The quoted rate shall also to include all gurantees/warrantees for the all mechanical parts, works , training of clients technicians, supplying operating manuals etc. The rate shall include all GST taxes, Insurance, transpotaion charges, labour and handling charges etc Personal Lockers for Men & Women Changing rooms 1 Set : 15 locker's, Each Locker Size ; 900 W x 400 D x 370 H (approx)
6
-
-
SS Work Benchs 1500 mm long X 2500 mm width x 900mm height
24
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements