Kerala State Industrial Development Corporation Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 2,00,000Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_KSIDC_693352_2Tender No
KSIDC/MFP/PPC Vypin/2024-25/02Tender Authority
Kerala State Industrial Development Corporation ViewPurchaser Address
-Website
http://https://www.ksidc.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming consolidating and dressing complete.
16.44
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
49.22
-
-
... More
Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in- charge.
310.33
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
16.44
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
16.8
-
-
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)
42.86
-
-
... More
Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), including the cost of required centering, shuttering complete.1:1.5:3 ( 1 cement : 1.5 coarse sand (Zone III): 3 graded stone aggregate 20 mm nominal size)
9.9
-
-
... More
Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.
194.12
-
-
... More
Providing and laying in position machine batched, machine mixed and machine vibrated design mix M-30 grade cement concrete for reinforced cement concrete using cement content as per approved design mix including pumping of concrete to site of laying but, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportion (as per IS 9103) to accelerate,retard setting of concrete to improve workability without impairing strength and durability as per direction of Engineer-in-Charge .(Note :- Minimum Cement content considered in this item is @ 350 kg/cum. Additional cement requirement as per mix design shall be considered by the bidder while quoting, nothing extra shall be paid on this account).All work upto plinth level.
67.73
-
-
... More
Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
24.6
-
-
... More
Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
99.2
-
-
... More
Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
67.08
-
-
... More
Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
18
-
-
... More
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
7105.26
-
-
... More
Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
21
-
-
... More
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels
/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline
slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin-
charge. The product performance shall carry guarantee for 10 years against any leakage.For horizontal surface one coat @1.10 kg per sqm.
756.15
-
-
... More
Kota stone slab flooring over 20 mm ( average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand)25 mm thick
525.44
-
-
... More
Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
417.13
-
-
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.
13.5
-
-
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
172.37
-
-
... More
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
264.6
-
-
... More
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand )and a top layer 6 mm thick cement plaster 1:3 ( 1 cement : 3 coarse sand) finished rough with sponge.
1580.64
-
-
... More
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
2460.65
-
-
... More
Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
1230.32
-
-
... More
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
1230.32
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .
353
-
-
... More
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
184.2
-
-
... More
Providing and fixing to existing door frames.30 mm thick Fiberglass Reinforced Plastic (F.R.P) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used all filler material throughout the hollow panel, casted monoolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS : 14856, complete as per direction of Engineer- in-charge.
58.05
-
-
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:100x10 mm
50
-
-
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:100 mm
48
-
-
... More
Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete
6
-
-
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
8
-
-
... More
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately)
Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension
i.e. in depth & width of profile shall be acceptable.Two track two panels sliding window made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)
28.8
-
-
... More
Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape &
size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc.
Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately).
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)
7.2
-
-
... More
Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key,
G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately).
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance
in dimension i.e. in depth & width of profile shall be acceptable.Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm).
20.16
-
-
... More
Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi
point locking having transmission gear, cylinder with keeps and one side key,
G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately).
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance
in dimension i.e. in depth & width of profile shall be acceptable.Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.50 sqm)
5.04
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness
8.64
-
-
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:
Particle Board 12 mm thickPlain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked
10
-
-
... More
Filling the gap in between aluminium frame & adjacent RCC/ Brick / Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawing and direction of Engineer-in -Charge complete.Upto 5 mm depth and 5 mm width
256
-
-
... More
Providing and fixing M.S. Grills of required pattern in frames of windows etc. with
M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc
210
-
-
... More
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
2980
-
-
... More
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
2139.2
-
-
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
3240
-
-
... More
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/ sqm by the same membrane manufactured of density at 25sup0/supC, 0.87-0.89 kg /litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : joint strength in longitudinal and transverse direction at 23sup0/supC as 350/ 300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150sup0/supC. Cold fexibility shall be upto -2sup0/supC when tested in accordance with ASTM. D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :3 mm thick
238.73
-
-
... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
247.2
-
-
... More
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm)
13.4
-
-
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC. waste fittings complete.
Semi rigid pipe32 mm dia
4
-
-
... More
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
16
-
-
... More
Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand 6 graded stone aggregate 20 mm nominal size) including disposal of malba.
16
-
-
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover
14.4
-
-
... More
Providing and fixing ball bearing for rolling shutters.
6
-
-
... More
Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer -in-Charges, (area of grill to be measured).
13.4
-
-
... More
Supplying 2 nos ( 1W + 1S ) submersible bottom suction cutter pump having 1.1KW/1.5hp/ 3 phase motor capable of delivering 2.5lps@ 5 mtr head.A common wall mounting micro controller based control panel for the working of 2 pumps ( 1w+1S ) according to the demand . The control panel should have inbuilt level controller , overload/ under load protection, dry run prevention, phase reversal protection, voter meter/ammeter, automatic changeover of pump on every start stop cycle , auto change over of on faulty pump , digital display , float switch for automatic operations etc . The item shall include cost of cement concrete foundation and properly securing the
pump on it”
1
-
-
... More
Supply, installing, testing and commissioing of 3 Nos. Centrifugal pump (2 W + 1S) for pumping domestic water from collection sump to the OH tank . The pump shall be coupled to adequate H.P. electrical motor, mounted on a common base frame. The pump shall be suitable for the following requirements: Flow rate of each pump - 60.00 Cu.m / hr. Head - 20 Mtr. Including Suitable indoor wall mounting type control panel with auto / manual change - over switch including dry run protection arrangement, wiring upto panel, earthing etc. complete. The item shall include cost of cement concrete foundation and properly securing the pump.
1
-
-
... More
PLUMBING & SANITARY WORKS
-
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
6
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore
36
-
-
... More
Providing and fixing PTMT Bottle Trap for Wash basin and sink.Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the center of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms
26
-
-
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC. waste fittings complete.
Semi rigid pipe40 mm dia
26
-
-
... More
Providing and fixing uplasticised PVC connection pipe with brass unions: 45 cm length15 mm nominal bore
36
-
-
... More
Providing and fixing toilet paper holder:C.P. brass
7
-
-
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms
7
-
-
... More
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
32
-
-
... More
Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore
56
-
-
... More
Providing and fixing PTMT, push cock of approved quality and colour.15 mm nominal bore, 98 mm long, weighing not less than 75 gms
45
-
-
... More
Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.
6
-
-
... More
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
25
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall32 mm nominal outer dia pipes
60
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall25 mm nominal outer dia pipes
25
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes
125
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore
25
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore
7
-
-
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:25 mm nominal bore
3
-
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia
260
-
-
... More
Providing and fixing PTMT grating of approved quality and colour. Circular type125 mm nominal dia with 25 mm waste hole
20
-
-
... More
Constructing brick masonry chamber for underground C.I. inpection chamber and bends with bricks in cement mortar 1:4 ( 1 cement: 4 coarse sand) C.I.cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23kg and weight of frame 15 kg), R.C.C top slab with 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm
nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:
Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets:With common burnt clay F.P.S (non modular) bricks of class designation 7.5
8
-
-
... More
Constructing brick masonry chamber for underground C.I. inpection chamber and bends with bricks in cement mortar 1:4 ( 1 cement: 4 coarse sand) C.I.cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23kg and weight of frame 15 kg), R.C.C top slab with 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:
Inside dimensions 600x850 mm and 45 cm deep for pipe line with three or more inlets:With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
7
-
-
... More
Extra for depth beyond 45 cm of brick masonry chamber:
For 500x700 mm sizeWith common burnt clay F.P.S.(non modular) bricks of class designation 7.5
8
-
-
... More
Extra for depth beyond 45 cm of brick masonry chamber:
For 600x850xmm sizeWith common burnt clay F.P.S. ( non modular) bricks of class designation 7.5
7
-
-
... More
Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
180x150 mm size P typeWith sewer bricks conforming to IS: 4885
9
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type
W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid
9
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work62.50 mm nominal inner dia pipes
30
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work100 mm nominal inner dia pipes
120
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.32 mm nominal outer dia pipes
60
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work50 mm nominal outer dia pipes
205
-
-
... More
Providing and fixing gun metal non-return valve of approved quality (screwed end): 80 mm nominal boreVertical
3
-
-
... More
Supplying, fixing, testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications. BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified.(inter valve / audco make) on the delivery side Supply:
3
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore
8
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore
1
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm nominal bore
10
-
-
... More
Steel work welded in built up Sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
250
-
-
... More
Providing and placing in position filters of 40 mm diameter G.I pipe with brass strainer of approved quality
1
-
-
... More
Providing and fixing C.I double acting air valve of approved quality with bolts, nuts, rubber insertion etc. complete ( The tail pieces, tapers etc. if required will be paid separately):50 mm dia
2
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap
26
-
-
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with
C.P. brass screws and washers complete.
7
-
-
... More
Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in- charge.
7
-
-
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm. weighing not less than 170 gms
7
-
-
... More
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:Single half stall urinal with 5 litre PVC. automatic flushing cistern
4
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
12
-
-
... More
Providing and fixing PVC pipes including jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 110 mm dia 10 Kgf/cm2
348
-
-
... More
Providing and fixing PVC pipes including jointing of pipes with one step pvc solvent cement,trenching , refilling & testing of joints complete as per direction of Engineer in Charge.150 mm dia 10 Kgf/cm2
190
-
-
... More
Providing and fixing PVC pipes including jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge.200 mm dia 10 Kgf/cm2
25
-
-
... More
Providing and fixing in position Pre-cast R.C.C. manhole cover and frame of required shape and approved quality.
L D - 2.5Rectangular shape 600x450 mm internal dimensions
4
-
-
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover
14.4
-
-
... More
ELECTRICAL WORKS
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C
66
-
-
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
16
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire
516
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
478
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire
30
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).
30
-
-
... More
Supplying and fixing danger plate 440 volts written in two languages.
5
-
-
... More
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth,metal enclosed plug top along with 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
2
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
22
-
-
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.2 Pair
140
-
-
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.2 Pair
30
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet
10
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet- RJ 45 WITH COVER
4
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
90
-
-
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)
14
-
-
... More
Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable
60
-
-
... More
Supply, installation, testing and commissioning of following port data switches with rack, the
rate shall be inclusive of all required civil works, Make: Netgear/Digilink
2
-
-
... More
Installation, testing and commissioning of pre - wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
38
-
-
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
16
-
-
... More
Supplying and fixing extra down rod of 10 cm length G.I. pipe, 15 mm dia, heavy gauge including painting etc. as required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
16
-
-
... More
Installation of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required.Upto 450 mm sweep
12
-
-
... More
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes
12
-
-
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator6 way, Double door
1
-
-
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door
2
-
-
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
78
-
-
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps
7
-
-
... More
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps
2
-
-
... More
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps
2
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. mm
110
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 95 sq. mm and upto 185 sq. mm
26
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 185 sq. mm and upto 400 sq. mm
86
-
-
... More
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as
required.Upto 35 sq. mm
490
-
-
... More
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as
required.Above 95 sq. mm and upto 185 sq. mm
7
-
-
... More
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as
required.Above 185 sq. mm and upto 400 sq. mm
140
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Upto 35 sq. Mm
130
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Above 35 sq. mm and upto 95 sq. mm
35
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Above 95 sq. mm and upto 185 sq. mm
24
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Above 185 sq. mm and upto 400 sq. mm
46
-
-
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
129
-
-
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
16
-
-
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
14
-
-
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)
25
-
-
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
164
-
-
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
12
-
-
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)
9
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X25 sq.mm (28mm)
24
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm)
8
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 95 sq. mm (45mm)
2
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 120 sq. mm (45mm)
4
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 240 sq. mm (62mm)
4
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV
grade as required.3 1/2X 300 sq. mm (70mm)
10
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV
grade as required.4 X 10 sq. mm (25mm)
6
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV
grade as required.4 X 16 sq. mm (28mm)
10
-
-
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
32
-
-
... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
256
-
-
... More
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.
250
-
-
... More
Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.
45
-
-
... More
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long,
G.I. tube,having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
1
-
-
... More
Fixing of lightning conductor finial (single prong) with base plate including holes etc. complete as required.
1
-
-
... More
Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.
4
-
-
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)
10
-
-
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)
20
-
-
... More
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
2
-
-
... More
Providing and laying G.l. tape 32 mm X 6 mm from earth. electrode directly in ground as required.
30
-
-
... More
Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.
8
-
-
... More
Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:240 sq. mm
4
-
-
... More
Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:300 sq. mm
1
-
-
... More
Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :300 sq. mm
1
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 120 sq. mm
90
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing masonry open duct as required.Upto 120 sq. mm
10
-
-
... More
Supplying and fixing Krone connectors of the following sizes in recessed GI/ Cadmium plated MS box fixed in the wall including making connections etc as required. (15 pair).
2
-
-
... More
Supply, erection and commissioning of vertical and horizontal type cable trays and cable supports fabricated out of MS Angles and MS flats with sufficient width annd spacing between successive cross members and supported at adequate spacing. The cable trays and supports shall
be painted with two coats of Zinc chromate primer and two coats of enamel paint.
500
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 2CX 2.5 sq.mm
6
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4CX 2.5 sq.mm
4
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 8CX 2.5 sq.mm
4
-
-
... More
Supplying of PVC insulated, heavy duty, aluminium conductor. 1.1KV grade armoured. MV cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970. 2Cx2.5 Sqmm Ar, Al.
193
-
-
... More
Supplying of PVC insulated, heavy duty, aluminium conductor. 1.1KV grade armoured. MV cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970. 4Cx2.5 Sqmm Ar, Al.
44
-
-
... More
Supplying of PVC insulated, heavy duty, aluminium conductor. 1.1KV grade armoured. MV cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970. 8C X2.5 Sqmm
44
-
-
... More
Supplying of PVC insulated, heavy duty, aluminium conductor. 1.1KV grade armoured. MV cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970. 4Cx10 Sqmm Ar, Al.
158
-
-
... More
Supplying of PVC insulated, heavy duty, aluminium conductor. 1.1KV grade armoured. MV cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970. 4Cx16 Sqmm Ar, Al.
134
-
-
... More
Supplying of PVC insulated, heavy duty, aluminium conductor. 1.1KV grade armoured. MV cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970. 3.5Cx25 Sqmm Ar, Al.
450
-
-
... More
Supplying of PVC insulated, heavy duty, aluminium conductor. 1.1KV grade armoured. MV cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970. 3.5Cx70 Sqmm Ar, Al.
51
-
-
... More
Supplying of PVC insulated, heavy duty, aluminium conductor. 1.1KV grade armoured. MV cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970. 3.5Cx95 Sqmm Ar, Al.
16
-
-
... More
Supplying of PVC insulated, heavy duty, aluminium conductor. 1.1KV grade armoured. MV cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970. 3.5Cx120Sqmm Ar, Al.
67
-
-
... More
Supplying of PVC insulated, heavy duty, aluminium conductor. 1.1KV grade armoured. MV cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970. 3.5Cx240Sqmm Ar, Al.
36
-
-
... More
Supplying of PVC insulated, heavy duty, aluminium conductor. 1.1KV grade armoured. MV cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970. 3.5Cx300Sqmm Ar, Al.
270
-
-
... More
APFC Panel (15kVAr): Supply and MS fabrication of APFC Panel Sheet: 14/16 SWG CR sheet
Paint : Siemen’s grey with powder coating RYB Phase Indication Lamps Ideal Make - 3Nos Digital Multi Function Meter -1 Nos
Current Transformer 50/5A 15VA class 1 - 3 Nos with required sencing CT - 1 sets Busbar Support : SMC
Busbar size :100A,TPN,3phase,4 WIRE AL . BUS Incomer 100A TPN MCCB - 1nos , Outgoing - 15 kVAR (Multi stages capacitor bank with different ratings, with auto/manual selector switch, suitable duty contactor, reactor, MCB and ON OFF push buttons,
ON/OFF/Trip Indication lamps with required accessories etc) - 3 Nos with required sencing CT - 1 sets,Busbar Support : SMC,Busbar size
:160A,TPN,3phase,4 WIRE AL . BUS Incomer 160A TPN MCCB - 1nos ,Outgoing - 15 kVAR (Multi stages capacitor bank with different
ratings, with auto/manual selector switch, suitable duty contactor, reactor, MCB & ON OFF push buttons, ON/OFF/Trip Indication lamps with required accessories etc) Busbar Support : SMC, Busbar size :160A,TPN,3phase,4 WIRE AL . BUS,Incomer ,160A 4P
Manual , hangeover - 1 nos, Outgoing, 100A 4P MCB -3 nos, 63A 4P MCCB - 2 nos , 40A DP MCB - 1 nos, Busbar size :400A,TPN,3phase,4 WIRE AL . BUS, comer, 400A 4P MCCB - 2 nos of EB & DG Incomer, with 400A 4P Microprocessor controlled Auto Transfer Switch with suitable Electrical/Mechanical interlock including required safty accessories relays etc (DG set
are AMF operation) Outgoing, 200A 4P MCB - 2 nos,160A 4P MCCB - 1 nos , 100A 4P MCCB - 7 nos 63A 4P MCCB - 2 nos
,Busbar Support : SMC Busbar size :630A,TPN,3phase,4 WIRE AL . BUS, 35kA ,EB Incomer, 630A 4P MCCB -
1nos, (microprocessor based MCCB) ,Outgoing ,400A 4P MCCB - 3 nos, 200A 4P MCCB - 1 , nos, 160A 4P MCCB - 2 nos, with followings, 2 nos of Trivector Energy meter shall be provided with RS 485 port and communication wiring shall be done for software integration & aluminium busbar, interlocks, base channel, control and power wiring, indicating multifunction meter, O/C, UV/OV, E/F relay etc
1
-
-
... More
APFC Panel (45kVAr): Supply and MS fabrication of APFC Panel,Sheet: 14/16 SWG CR
sheet,Paint : Siemen’s grey with ,owder coating ,RYB Phase Indication Lamps Ideal
Make - 3Nos ,Digital Multi Function Meter -1 Nos ,Current Transformer 160/5A 15VA class 1
- 3 Nos with required sencing CT - 1 sets,Busbar Support : SMC,Busbar size
:160A,TPN,3phase,4 WIRE AL . BUS
Incomer
160A TPN MCCB - 1nos ,Outgoing - 45 kVAR (Multi stages capacitor bank with different
ratings, with auto/manual selector switch, suitable duty contactor, reactor, MCB's and ON
OFF push buttons, ON/OFF/Trip Indication lamps with required accessories etc)
Busbar Support : SMC, Busbar size :160A,TPN,3phase,4 WIRE AL . BUS,Incomer ,160A 4P
Manual , hangeover - 1 nos, Outgoing, 100A 4P MCB -3 nos, 63A 4P MCCB - 2 nos , 40A DP MCB - 1 nos
Busbar size :400A,TPN,3phase,4 WIRE AL . BUS, comer, 400A 4P MCCB - 2 nos of EB
& DG Incomer, with 400A 4P Microprocessor controlled Auto Transfer Switch with
suitable Electrical/Mechanical interlock including required safty accessories relays etc (DG set are AMF operation) Outgoing, 200A 4P MCB - 2 nos,160A 4P MCCB - 1 nos , 100A 4P MCCB - 7 nos 63A 4P MCCB - 2 nos
,Busbar Support : SMC
Busbar size :630A,TPN,3phase,4 WIRE AL . BUS, 35kA ,EB Incomer, 630A 4P MCCB -
1nos, (microprocessor based MCCB) ,Outgoing ,400A 4P MCCB - 3 nos, 200A 4P MCCB - 1
nos, 160A 4P MCCB - 2 nos, with followings, 2 nos of Trivector Energy meter shall be
provided with RS 485 port and communication wiring shall be done for software integration
& aluminium busbar, interlocks, base channel, control and power wiring, indicating
multifunction meter, O/C, UV/OV, E/F relay etc
2
-
-
... More
Common Panel: Supply and MS fabrication of Common Panel eet: 14/16 SWG CR sheet Paint
: Siemen’s grey with powder coating RYB Phase Indication Lamps Ideal Make - 3 nos , Digital Multi Function Meter -1 Nos, Current Transformer 160/5A 15VA class 1 - 3 Nos
Busbar Support : SMC, Busbar size :160A,TPN,3phase,4 WIRE AL . BUS,Incomer
,160A 4P
Manual , hangeover - 1 nos, Outgoing, 100A 4P MCB -3 nos, 63A 4P MCCB - 2 nos
,
40A DP MCB - 1 nos
Busbar size :400A,TPN,3phase,4 WIRE AL . BUS, comer, 400A 4P MCCB - 2 nos of EB
& DG Incomer, with 400A 4P Microprocessor controlled Auto Transfer Switch with
suitable Electrical/Mechanical interlock including required safty accessories relays etc (DG set
are AMF operation) Outgoing, 200A 4P MCB - 2 nos,160A 4P MCCB - 1 nos , 100A 4P MCCB - 7 nos 63A 4P MCCB - 2 nos
,Busbar Support : SMC
Busbar size :630A,TPN,3phase,4 WIRE AL . BUS, 35kA ,EB Incomer, 630A 4P MCCB -
1nos, (microprocessor based MCCB) ,Outgoing ,400A 4P MCCB - 3 nos, 200A 4P MCCB - 1
nos, 160A 4P MCCB - 2 nos, with followings, 2 nos of Trivector Energy meter shall be
provided with RS 485 port and communication wiring shall be done for software integration
& aluminium busbar, interlocks, base channel, control and power wiring, indicating
multifunction meter, O/C, UV/OV, E/F relay etc
1
-
-
... More
MDB: Supply and MS fabrication of MDB Panel ai,t : Siemen’s grey with powder
coating,RYB Phase Indication Lamps Ideal Make - 6 nos, Digital Multi Function Meter -2 Nos,
Current Transformer 400/5A 15VA class 1 - 6 Nos, Busbar Support : SMC
Busbar size :400A,TPN,3phase,4 WIRE AL . BUS, comer, 400A 4P MCCB - 2 nos of EB
& DG Incomer, with 400A 4P Microprocessor controlled Auto Transfer Switch with
suitable Electrical/Mechanical interlock including required safty accessories relays etc (DG set
are AMF operation) Outgoing, 200A 4P MCB - 2 nos,160A 4P MCCB - 1 nos , 100A 4P MCCB - 7 nos 63A 4P MCCB - 2 nos
,Busbar Support : SMC Busbar size :630A,TPN,3phase,4 WIRE AL . BUS, 35kA ,EB Incomer, 630A 4P MCCB -
1nos, (microprocessor based MCCB) ,Outgoing ,400A 4P MCCB - 3 nos, 200A 4P MCCB - 1
nos, 160A 4P MCCB - 2 nos, with followings, 2 nos of Trivector Energy meter shall be
2
-
-
... More
MAIN PANEL: Supply and MS fabrication of main Panel Sheet: 14/16 SWG CR sheet,Paint : Siemen & S.grey with powder coating,RYB Phase Indication Lamps Ideal Make - 3Nos , Digital Multi Function Meter -1 Nos, Current Transformer 630/5A 15VA class 1 - 3 Nos
,Busbar Support : SMC Busbar size :630A,TPN,3phase,4 WIRE AL . BUS, 35kA ,EB Incomer, 630A 4P MCCB -
1nos, (microprocessor based MCCB) ,Outgoing ,400A 4P MCCB - 3 nos, 200A 4P MCCB - 1 nos, 160A 4P MCCB - 2 nos, with followings, 2 nos of Trivector Energy meter shall be provided with RS 485 port and communication wiring shall be done for software integration & aluminium busbar, interlocks, base channel, control and power wiring, indicating multifunction meter, O/C, UV/OV, E/F relay etc provided with RS 485 port and communication wiring shall be done for software integration & aluminium busbar, interlocks, base channel, control and power wiring, indicating multifunction meter, O/C, UV/OV, E/F relay etc
1
-
-
... More
Supply and fixing carbondi oxide fire extinguisher type 4.5 kg capacity.
3
-
-
... More
Supplying of fire bucket painted red & approved quality (set of 4 buckets).
2
-
-
... More
Supply and laying of 11 KV Grade, Elastemer Polymer 2.5mm thickness
10
-
-
... More
Supply and fixing Hand gloves suitable for 415 V
2
-
-
... More
supplying and fixing of shock treatment chart.
2
-
-
... More
Supplying of first aid box.
1
-
-
... More
Supply and transportation of 12W, 1200 lumens, 600mm length LED batten tube light, housing made with PC body, wide operating voltage with Single / double side connection, PF;0.9, Surge protection: ; 2KV, THD &15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI;80,.etc complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE: Phillips / Wipro / Crompton / Bajaj / Havells LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG
10
-
-
... More
SUPPLY OF FITTING & FANS:
Supply and transportation of 20W +/-10%, & / 2000 lumens, 1200mm length LED retro tube light, housing made with alluminium anodised body, wide operating voltage with double side connection, & Surge protection: & 2KV, THD&15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI & 80,.etc complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE: Phillips / Wipro / Crompton / Bajaj / Havells & LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM
28
-
-
... More
Supply, fabricating &erection of 1.8 mtr high chain link fencing (50mm cross link) over 600 mm high brick masonry, using 4 mm thick GI chain link with a framework of 50x50x6 mm MS angle between vertical posts of ISMC 75x50mm at 2400 mm interval, which are fixed to the concrete footing (1:2:4) of size 450x450x200 mm (above GL) with adequate footing depth, between the brick / block masonry. Brick / block masonry (345 mm thick) and 200 mm from ground level for foundation & plinth in cement mortar (1:6). The brick masonry is to be pointed using cement mortar 1:3 to have a flush finish. Earth strip shall be connected to the fencing for its earthing.The MS framework for chain link fencing is finished using zinc chromate primer & 2 coats of synthetic enamel paint. 1.5 mtr wide gate shall be provided with suitable locking arrangements.The rate shall be inclusive of all materials, labour, lead, lift, etc including excavation works and fabrication and assembly works including all nuts, bolts & other miscellaneuos items, etc.complete
25
-
-
... More
Light Duty Exhaust fan in metal frame working on 230 V A/C 300 / 305 mm sweep Make:Almonard/Usha/Crompton / Bajaj
12
-
-
... More
Supply, Transportation of energy efficient decorative fan, 1200 mm sweep, aluminium body, consuming 28 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) motor, class of insulation: B, 3 no's blades, 30 cm long down rod, 2 no's canopies, shackle kit, safety rope, copper winding, Power Factor greater than 0.90, Service Value (CMM/W) greater than 8.5, Air delivery minimum 235 CMM, 350 RPM (tolerance as per IS:374-2019), THD less than 10%, remote or compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., complete.
Makes : Atomberg (Efficio + ) / Havells / Orient / RR / Halonix
16
-
-
... More
Supply and transportation of 150W LED Flood light Luminaire made of pressure die cast aluminum housing with powder coated, having toughened glass cover, Suitable lens on LEDs, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66 )protected, wide operating voltage range , P.F > 0.90, System having efficacy >110 lumens/watt, with Ingress protection IP66, Driver surge protection >10KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>70, Inbuilt Electrical protections like Over
voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates.
LUMINAIRE MAKE : PHILIPS / CROMPTON / BAJAJ / Wipro LED MAKE : PHILIPS LUMILEDS / OSRAM / SAMSUNG
13
-
-
... More
MV SWITCH GEAR - TRANSFORMER: S.I.T.C of suitable for outdoor type plinth mounted 400kVA, 11/0.433kV oil cooled transformer with OLTC including all accessories. The degree of protection shall be suitable for outdoor application. The transformer shall be designed to suit design temperature of 50deg.The py shall be suitable for 1Rx3C x 150Sqmm 11KV Al, Ar cable and Sy shall be suitable for 3Runs of 3.5Cx300sqmm cable. All standard accessories shall be provided like, name plated with tech details, lifting hooks, jacking pads, breather, bidirectional rollers, winding temperature indicators, relays, alarm and trip contacts etc., Painting shall be carried out as per IS, shade is 631, impedance of the transformer shall be as per IS. The transformer shall be provided with suitable neutral CT to cater REF protection.The equipment shall satisfy Indian standards, local governing authorities, fire etc., Rate shall be for the complete Transformer with connected civil works etc. The contractor to submit vendor's general arrangement & scheme drawings and approval & manufacturing clearance to be obtained for engineer in-charge
1
-
-
... More
Supply installation testing and commissioning of NCT as per local EB standard
1
-
-
... More
Supply & Installation of 5HP DOL starter with isolator (Water pump)
3
-
-
... More
HT CABLING: Supplying of XLPE insulated, heavy duty, aluminium conductor. 11KV grade armored. MV cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970 Make: Polycab/Finolex 11KV Grade, 3Cx300Sqmm Ar, Al.
25
-
-
... More
Supply and installation of emergency OFF trip push button with front Glass and painted in RED Colour.
1
-
-
... More
Supply and installation of HT TOD meter ,
CL:- 0.2S, 3Ph, 4 wire in HT Metering Panel. The rate includes Testing of TOD from TMR dvision ( Excluding statutory fees)
1
-
-
... More
HT Metering Panel: Supply, erection, testing and commissioning of outdoor floor
/wall mounting type HT panel with EB metering with wiring arrangement. The panel shall comprise of Al bars as applicable, bus bars of adequate size, brass neutral link, earthing with suitable number of taps. The panel shall comprise as per outdoor IP protection.The incoming/outgoing cable entry shall be designed according to ACB/MCCB/SFU's/LBS rating. The cable entry/gland plate shall be at bottom/top. The gland plate shall be removable and 3mm thick. The enclosure shall be of 2mm for non load bearing members and 2.5mm for load bearing members thick CRCA sheet steel. The colour shade shall be RAL7032. As per local EB standard protection relays to be considered. The complete board shall be manufactured as per the standard practice and shall meet the requirements of other relevant authorities.
This including all components, hardware's, all connected civil works etc.The contractor to submit vendor's general arrangement & scheme drawings along with CPRI certificate and approval & manufacturing clearance to be obtained for engineer in-charge.
Load break switch with earth to considered 11kV, 26.2 kA, 630A three phase, 11kV indoor Resin Cast CT, (CT ratio and fuse rating as per EB suggestion), 10 VA burden, class 0.2 S, 11kV/110V, 25VA, CL 0.2 voltage transformer, TOD metering (supply, testing, erection and commissioning), aluminimum busbar with supporting insulator, HRC fuses, shunt trip coil 230V AC, space heater with thermostat, indicating lamps, required supporting arrangements, lightning arrester arrangement, interlock arrangement, fencing arrangemnet, necesory earthing etc as required.
1
-
-
... More
RMU: Supply, Installation, Testing and commissioning of CCV type outdoor RMU unit with 2Nos. motorized LBS + 1No motorized VCB including civil works for the foundation
1
-
-
... More
DG - 160 kVA (with AMF Panel): Supply, erection, testing and commissioning of the following capacity 415V DG's shall have in-built or separate AMF panel, diesel tank, AVP, acoustic enclosures shall cater to the allowable dB level as per statutory norms. The enclosure shall be fully weather proof to meet IP55, the engine shall be four stoke, 1500RPM, designed for operating in high speed diesel, water cooled type. Suitable civil foundation shall be part of the job. The entire job shall fulfill CPCB IV / any statutory norm. Supply, erection, testing and commissioning of suitable capacity diesel tank including level monitor, the tank shall be located closer to the DG, it shall be mounted on structural platform. The tank and the DG shall be properly connected by pipe lines including valves, flame proof motors, the pipe lines shall be supported properly. The drawings showing the entire arrangements shall be submitted and obtain approval from owner/consultant. Design, drawings, supply, erection, testing and commissioning of exhaust chimneys, required stack, Silencers required civil/structural/painting works, obtaining approval & necessary certificate from authority. exhaust chimney shall be taken above the building and upto suitable heights conforming to the statutory regulations by Environment authorities.
The chimney shall be self supporting with all necessary civil / structural/paintings works. For exact locations of the DG shall be referred in the respective layouts The contractor to submit vendor's general arrangement & scheme drawings and approval & manufacturing clearance to be obtained for engineer in-charge
2
-
-
... More
HT CABLING: Supplying of XLPE insulated, heavy duty, aluminium conductor. 11KV grade armored. MV cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970 Make: Polycab/Finolex 11KV Grade, 3Cx150Sqmm Ar, Al.
75
-
-
... More
Liaison and supervising Charge for local EB and CEA approving authorities
1
-
-
... More
YARD CONCRETE PAVEMENT
-
-
-
... More
Construction of granular sub-base by providing graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with a motor grader on the prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 Grading-I - Plant Mix Method
282
-
-
... More
Filling with Quarry Muck Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade
634.5
-
-
... More
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing.
35.25
-
-
... More
Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing
282
-
-
... More
FIRE PROTECTION SYSTEM
-
-
-
... More
Fabrication, supply, Installation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :Incomings 400A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Ammeter (0-400 A) with selector switch & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 500A Outgoings
( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)
Main Fire Pump 200 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 75 hp pump with overload protection, current sensing type single phase preventer complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.
Jockey Pump : 100 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventer complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.
Diesel Engine Control
Control for diesel engine comprising - Automatic/Manual selector switch & 3 attempt starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitable for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0- 20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specifications.
1
-
-
... More
Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as requiredSingle headed Gunmetal
3
-
-
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required150 mm dia
8
-
-
... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :Stainless Steel (Grade 304)
5
-
-
... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :Gun metal
5
-
-
... More
Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump)
a)Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-F& insulation, conforming to IS : 325. c) M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. As required.
d) Suitable cement concrete foundation duly plastered and with anti vibration pads. 180 lpm at 88 m Head
1
-
-
... More
Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump)
Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.
Suitable cement concrete foundation duly plastered and with anti vibration pads. 2280 lpm at 70 m Head
1
-
-
... More
Electric driven Main Fire Pump: Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-F& insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads.2280 lpm at 88 m Head
1
-
-
... More
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming
to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required
:Single headed Stainless steel
1
-
-
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required80 mm dia
1
-
-
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required100 mm dia
1
-
-
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :40mm dia
1
-
-
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :80mm dia
1
-
-
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :150mm dia
1
-
-
... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.
a.20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585
b.20 mm nominal internal dia gun metal globe valve & nozzle. c.Drum and brackets for fixing the equipmets on wall.
d.Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.
30 m
1
-
-
... More
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.
1
-
-
... More
Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of following sizes as required :100mm dia
1
-
-
... More
Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, centre bracket, stock bar of following sizes complete as required.1000mm
49
-
-
... More
EXTERNAL HYDRANT SYSTEM : Supplying, installing, testing and commissioning of M.S Pipes Heavy grade, Class-C, ERW confirming to IS 1239 Pt - I (above ground pipe) with suitable type of supports (Shall be fabricated by M.S. Channel / Angle / Flat for above 50 mm dia), anchor fasteners, bolts, nuts, clamps, & Uclamp, bolt, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, . The quoted rate shall also include for chasing / chipping walls, making bore holes in walls and making them good with filler material. The above ground pipe shall be painted with one coat of zinc chromate / red oxide primer and two coats of synthetic enamel paint of fire red colour as per IS 5 shade 536. The pipe
fittings shall be butt weld type for 50NB and above and socket weld /screwed type for 40NB and below pipes. 80mm nominal dia
20
-
-
... More
Supply, Installing, testing and commissioning of Heavy class M.S pipe, Class-C ERW (as per IS-1239 Part-1) laid in under ground (1 Mtrs below ground level). The quoted rate shall includes necessary specials like long radius bends, tees, including cutting, welding / flanged joints with necessary washers, nuts, bolts, etc. also include for providing concrete anchor blocks at all change in direction of pipeline if necessary and also near each joints. The quoted
rate shall includes Wrapping & Coating of Under ground M.S. Heavy Grade Pipe -This corrosion protection tape shall comprise coal tar component supported on fabric of organic (or) inorganic fibre and minimum 4mm thick and shall conform to requirement of IS:10221 code of practice for coating and wrapping of under ground pipes line. The wrapping &coating tape to be cut to 200mm wide and wounding on pipe. Minimum 2.8m tape of 200mm wide per
150mm pipe shall be considered
160
-
-
... More
Supply, Installing, testing and commissioning of Heavy class M.S pipe, Class-C ERW (as per IS-1239 Part-1) laid in under ground (1 Mtrs below ground level). The quoted rate shall includes necessary specials like long radius bends, tees, including cutting, welding / flanged joints with necessary washers, nuts, bolts, etc. also include for providing concrete anchor blocks at all change in direction of pipeline if necessary and also near each joints. The quoted rate shall includes Wrapping & Coating of Under ground M.S. Heavy Grade Pipe -This corrosion protection tape shall comprise coal tar component supported on fabric of organic (or) inorganic fibre and minimum 4mm thick and shall conform to requirement of IS:10221 code of practice for coating and wrapping of under ground pipes line. The wrapping & coating tape to be cut to 200mm wide and wounding on pipe. Minimum 2.8m tape of 200mm wide per 200 mm dia pipe
20
-
-
... More
FIRE EXTINGUISHERS: Supplying, installing and commissioning Portable Fire extinguishers
of following type & capacity. ABC powder type fire extinguisher of 6 Kgs. Capacity,Mono
Ammonium Phospate Powder 90%, Stored pressure type, Pressure Gauge, Controllable
discharge mechanism with Hose & Nozzle etc. Complete. Confirming to IS:15683
12
-
-
... More
SIGNAGES: Providing and installing in position the following type of sign boards made out of 3mm thick & PVC foam board with computer cut. PVC non-reflective self adhesive vinyle painted foam board, complete with mirror fasteners. Providing and fixing in position the signage of " Fire Extinguisher " to be pasted immediately above the every extinguisher. Size 1.80m X 2.4m
12
-
-
... More
FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)Supplying, installation, testing & commissioning talk back slave station in surface/ recess suitable for operation on simplex mode complete with P.T.T. knob & speaker/ microphone enclosed in a M.S.(16 SWG)/ ABS box with break glass in front etc. complete as required.
2
-
-
... More
Supplying, installation, testing & commissioning of addressable manual call point complete as required.
2
-
-
... More
PUBLIC ADDRESS SYSTEMSupplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.
2
-
-
... More
CABLING & WIRINGSupplying & laying of 2x1.5 sq mm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
200
-
-
... More
FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)Supplying,
installation, testing &commissioning of heat detector operating at 54°C / 57°C with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required.
2
-
-
... More
M.S. Hose cabinet, stand mounted type fabricated out of M.S. sheet of 16 swg. with glass fronted (4mm thick glass with rubber beeding) door and size of the cabinet shall be 600mm x 750 mm x 250 mm. Quoted rate shall be includes suitable stand for mounting, all fasteners etc, and cabinet shall be powder coated of approved colour both inside and outside.
5
-
-
... More
Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 450mm nominal dia
18
-
-
... More
Supplying, installing, testing and commissioning of 2 core x 1.5 mm², armoured, FRLS
outer Sheathed PVC insulated copper conductor Cable to connect all fire alarm devices into
FACP.
650
-
-
... More
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.25 mm dia
75
-
-
... More
FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)Supplying, installation, testing & commissioning of smoke detector with built-in LED and mounting base complete with all connections etc. as required.
33
-
-
... More
Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5 % V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system ( which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol Bacnet/ Modbus over IP complete as per specifications.
INTELLIGENT FIRE ALARM SYSTEMTen Loop Panel
1
-
-
... More
1.1 KV GRADE POWER / CONTROL CABLES: Supplying, laying, testing & commissioning of FRLS, PVC outer sheateh, steel armoured, aluminium / copper conductor, 1.1 KVgrade power cables with glands etc.The cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc. as required. For cables laid out door the rate shall include earth
excavation providing brick and sand protection, refilling and compacting the earth.The rate shall excludes tray & Hume pipes. The quoted rate shall includes the end termination for 1.1KV cables with double compression type cable gland and heavy duty tinned copper cable sockets as per the relevant IS standards. Rate shall be inclusive of all sundry materials
like adhesive tape , PVC sleeves , bolts and nuts, washers etc. including plugging unused holes. Above 10 mm² shall be aluminium conductor type. 2R x 3.5 Core x 35 mm² Aluminium conductor cable for electrical motor driven main pump
20
-
-
... More
1.1 KV GRADE POWER / CONTROL CABLES: Supplying, laying, testing &commissioning of FRLS, PVC outer sheateh, steel armoured, aluminium / copper conductor, 1.1 KV grade power cables with glands etc.The cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc. as required. For cables laid out door the rate shall include earth
excavation providing brick and sand protection, refilling and compacting the earth.The rate shall excludes tray & Hume pipes. The quoted rate shall includes the end termination for 1.1KV cables with double compression type cable gland and heavy duty tinned copper cable sockets as per the relevant IS standards. Rate shall be inclusive of all sundry materials
like adhesive tape , PVC sleeves , bolts and nuts, washers etc. including plugging unused holes. Above 10 mm& shall be aluminium conductor type. 2R x 4 Core x 16 mm& aluminium conductor cable for electrical motor driven main pump
35
-
-
... More
1.1 KV GRADE POWER / CONTROL CABLES: Supplying, laying, testing & commissioning of FRLS, PVC outer sheateh, steel armoured, aluminium / copper conductor, 1.1 KVgrade power cables with glands etc.The cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc. as required. For cables laid out door the rate shall include earth excavation providing brick and sand protection, refilling and compacting the earth.The rate shall excludes tray & Hume pipes. The quoted rate shall includes the end termination for 1.1KV cables with double compression type cable gland and heavy duty tinned copper cable sockets as per the relevant IS standards. Rate shall be inclusive of all sundry materials like adhesive tape , PVC sleeves , bolts and nuts, washers etc. including plugging unused holes. Above 10 mm² shall be aluminium conductor type. 2R x 4 Core x 2.5 mm² copper conductor cable for MCC to ESP interlocking
471.25
-
-
... More
1.1 KV GRADE POWER / CONTROL CABLES: Supplying, laying, testing & commissioning of FRLS, PVC outer sheateh, steel armoured, aluminium / copper conductor, 1.1 KVgrade power cables with glands etc.The cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc. as required. For cables laid out door the rate shall include earth
excavation providing brick and sand protection, refilling and compacting the earth.The rate shall excludes tray & Hume pipes. The quoted rate shall includes the end termination for 1.1KV cables with double compression type cable gland and heavy duty tinned copper cable sockets as per the relevant IS standards. Rate shall be inclusive of all sundry materials
like adhesive tape , PVC sleeves , bolts and nuts, washers etc. including plugging unused holes. Above 10 mm² shall be aluminium conductor type. 2R x 12 Core x 1.5 mm & copper conductor cable for electrical motor driven main pump
20
-
-
... More
Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth up to 1.5 m including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth. including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m: Pipes, cables etc. exceeding 80m dia but not exceeding 300 mm dia
150
-
-
... More
Constructing masonry chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 grades stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 ( 1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
... More
Booster pump control panel : (at terrace 32 Amps. TP&N SFU with HRC fuses with 10 HP fully automatic DOL starter with over load protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation,selector switch for local/remote,auto/manual/OFFoperation.
1
-
-
... More
Providing and fixing in position the sign boad of EXIT & with arrow to be placed at parking levels by hanging on ceiling to direct cars / occupants to outside the building in an emergency. The exit sign board will be auto glow (photoluminiscent) type which will glow at dark. The size of signage shall be minimum 8"x 16"
3
-
-
... More
Supply, erection, testing & commissioning of electrical motor driven Booster pump of
Monoblock type capable to deliver 450 LPM at 35MWC.The pump shall be coupled to motor
of suitable 10 HP and 2900 RPM with complete set shall mounted on common base frame. ( as
recommended by manufacturer) and Foundation bolts etc
1
-
-
... More
Fabrication, Supplying, Installation, Testing & Commissioning of MCC control panel for main & jockey pump of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection, having switchgears and accessories mounting and internal wiring, earth terminals, numbering etc. complete in all respects, suitable for operation on 415 V, 3 phase, 50 HZ. AC supply with enclosure protection class IP 42 as required.INCOMER (a) 200 Amps. TP&N SFU with HRC fuses (b) Voltmeter (0-500 Volts) with selector switch. (c) Ammeter (0- 400Amps.) with selector switch & CT's etc. (d) Set of 3 Phase indicating lamp. (e) Set of AJ.bus bar Amps.
OUTGOING. (a) Hydrant pump. 125 Amps.TP&N SFU with HRC fuses with 110 HP fully automatic star/ delta starter with over load protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation,
selector switch for local/remote, auto/manual/OFFoperation. (c) Jockey pump. 32 Amps. TPN SFU with HRC fuses with 15 HP fully automatic DOL starter with over load protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation,selector switch for local/remote,auto/manual/OFFoperation
1
-
-
... More
Supplying, installing, testing and commissioning of G.I Pipes Heavy grade, Class-C, ERW confirming to IS 1239 Pt - I for pipes Up to 150mm dia and IS: 3589 for pipes 200 mm dia and above with approved painting, suitable type of supports, anchor fasteners, bolts nuts (Galvanised), clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc,. The quoted rate shall also include for chasing / chipping walls, making bore holes in walls / floor and making them good with filler material etc. complete. -40mm dia
25
-
-
... More
Supplying, installing, testing and commissioning of G.I Pipes Heavy grade, Class-C, ERW confirming to IS 1239 Pt - I for pipes Up to 150mm dia and IS: 3589 for pipes 200 mm dia and above with approved painting, suitable type of supports, anchor fasteners, bolts nuts (Galvanised), clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc,. The quoted rate shall also include for chasing / chipping walls, making bore holes in walls / floor and making them good with filler material etc. complete. -32mm dia
36
-
-
... More
Supplying, installing, testing and commissioning of 10 zone selector P.A. console and with CRCA sheet housing and control desk (rack) as required. Console shall have all call / call back facility complete with 8 hr battery back up and it should also work on AC single phase power
1
-
-
... More
Supplying, installing, testing and commissioning solid state Amplifier of 250 W RMS output with Microphone, including necessary control wires etc. complete.
1
-
-
... More
Supplying, installing, testing and commissioning of G.I Pipes Heavy grade, Class-C, ERW confirming to IS 1239 Pt - I for pipes Up to 150mm dia and IS: 3589 for pipes 200 mm dia and above with approved painting, suitable type of supports, anchor fasteners, bolts nuts (Galvanised), clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows,
flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc,. The quoted rate shall also include for chasing / chipping walls, making bore holes in walls / floor and making them good with filler material etc. complete. -65mm dia
30
-
-
... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :4 way - 150 mm dia M.S. Pipe
1
-
-
... More
Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :150mm dia
2
-
-
... More
Supplying and fixing of perforated G.I.sheet cable tray with neccessory angle iron suspension supports, anchor fasteners etc. complete. Maximum height of suspension shall not exceed 500 mm.Size of the tray shall be suitable for laying the above mentioned cables. The minimum cable tray size shall be 300mm x 75 mm depth.
40
-
-
... More
G.I. Earthing strips of 50mm x 6mm thick, strip shall be run on floor / ceiling / walls, from the equipment to the nearest Earth pit with neccessory accessories as required. (Earth pit shall be executed by other agencies).
30
-
-
... More
Supplying, installing, testing and commissioning of G.I Pipes Heavy grade, Class-C, ERW confirming to IS 1239 Pt - I for pipes Up to 150mm dia and IS: 3589 for pipes 200 mm dia and above with approved painting, suitable type of supports, anchor fasteners, bolts nuts (Galvanised), clamps, &Uclamp, bolt, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc,.The quoted rate shall also include for chasing / chipping walls, making bore holes in walls /
floor and making them good with filler material etc. complete. 200MM nominal dia
12
-
-
... More
Supplying, installing, testing and commissioning of G.I Pipes Heavy grade, Class-C, ERW confirming to IS 1239 Pt - I for pipes Up to 150mm dia and IS: 3589 for pipes 200 mm dia and above with approved painting, suitable type of supports, anchor fasteners, bolts nuts (Galvanised), clamps, &Uclamp, bolt, malleable specials such as Reducers,Tees, elbows,flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc,.The quoted rate shall also include for chasing / chipping walls, making bore holes in walls /
floor and making them good with filler material etc. complete. 100MM nominal dia
60
-
-
... More
Supplying, installing, testing and commissioning of G.I Pipes Heavy grade, Class-C, ERW confirming to IS 1239 Pt - I for pipes Up to 150mm dia and IS: 3589 for pipes 200 mm dia and above with approved painting, suitable type of supports, anchor fasteners, bolts nuts (Galvanised), clamps, &Uclamp, bolt, malleable specials such as Reducers,Tees, elbows,flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc,. The quoted rate shall also include for chasing / chipping walls, making bore holes in walls /
floor and making them good with filler material etc. complete. 80MM nominal dia
20
-
-
... More
Supplying, installing, testing and commissioning of G.I Pipes Heavy grade, Class-C, ERW confirming to IS 1239 Pt - I for pipes Up to 150mm dia and IS: 3589 for pipes 200 mm dia and above with approved painting, suitable type of supports, anchor fasteners, bolts nuts (Galvanised), clamps, &Uclamp, bolt, malleable specials such as Reducers,Tees, elbows,flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc,. The quoted rate shall also include for chasing / chipping walls, making bore holes in walls /
floor and making them good with filler material etc. complete. 50MM nominal dia
12
-
-
... More
Designing, supplying, installing and Commissioning of Refrigeration system for Raw & Finished Chill room, Fish Processing Hall, as per the follwing details and technical specifications: The refrigeration system shall be operating with CFC free R404a Freon gas, split type of suitable capacity with Air Cooled Condensing Units located outside the rooms and the Evaporator Units located inside the rooms with interconnecting copper piping & cabling works. The Air Cooled condensing unit with the semi-hermetic compressor shall be of same make with the necessary controls like HP/LP,Oil pressure cut out and Oil seperator, Suction Accumulator, & Liquid line valves & Controls, Temperature Sensor & Thermostat (For Room Temperature Control) .Micro-processor based Electrical starter panel with the controller of Dixcell/Carrle make which will have BMS compactabilit .The condensing units shall be worked with the maximum ambient conditions of 45 Deg C . The evaporator cabin shall be constructed using GI powder coated casing. All the refrigerant tubes shall be with copper construction & Al fins. The evaporator shall be provided with the minimum fins spacing of 6-7 mm to allow sufficient frost build up to enable longer operation hrs between defrost. Defrost shall be electric typefor chill room. The evaporator shall be Eurovent certified . The evaporator shall be provided with heaters for Coil,tray and Fans as the same are working under very low tempertaure applications.By considering the very high humid conditions of our area,we are proposed to have double tray with 20 mm insulation for the drain applications. The expansion valves shall be of TEXV for precising the refrigerat flow to the evaporator based on the various load conditions. Detailed design calculations showing the engineering design details to prove the capability of the refrigeration system to achieve the intended temperature and other parameters. The job shall also include to supply and installing inside the chill rooms safety hooter with switch & first charge of refrigerant gas. All the necessary electrical fixtures and Control panel board including all the switches, breaker and control points required for the refrigration system and Processing building should be propoerly designed and installed as per the IS standards. The quoted rate shall also to include all gurantees/warrantees for the all mechanical parts, works , training of clients technicians, trial runs supplying operating manuals etc. The rate shall include all taxes, duties, transpotaion charges, labour and handling charges etc. **For Deatiled Specifications Please Reffer Techniacl Document Refrigeration Works.
-
-
-
... More
Supply of Refrigeration & Puf Panels & Accessories for Raw & Finished Chill Room : Designed Room temperature (+)2°C ± 2°C Product to be stored: Fish's / Sea food Quantity to be stored per Chill Room : 10MT (approx), No.of Chambers: 4 No's Room Description: 4no's. of 4.0 x 4.5 x 5.0 m ( clear dimensions) insulated with 80 mm thick PUF insulation for Walls & Celieng with 0.5 mm PPGI/PCGI lamination & 80 mm thick PUF Slab for Floor insulation. Doors- 4no's with suitable PVC Strip Curtains:1200 x 2100 mm , Single Leaf Swing Door (Face Mounted) 80 mm thick PUF insulation with 0.6 mm PPGI/PCGI lamination on both sides. PPGI wall frame on three sides, Raising hinges, Handle, Key lock, and Emergency release opener from inside, Heater arrangement in Door Frame & Floor Sill. For Deatiled Specifications Please Reffer Techniacl Document Refrigeration Works. Type of refrigeration system : Split Type ,Type of Cooling: DX Type Capacity of Refrigeration system [KW] : 9 kW per Chill Room (1W+1S) @ (-)4 Deg. C SST & 60 Deg. C SDT Type of Refrigerant: R404a Type of compressor: Reciprocating Semi Hermetic type with Suitable Canopy for Condensing Unit Type of Condenser: Air Cooled -8 no's (2Nos for each Chill room 1W+1S)Type of Evaporator unit: Forced Air Cooled. 9 KW capacity, Eight No's, Two for each Chill room (1W+1S) with GI Powder Coated casing, Copper tubes of suitable length, Aluminium fins. The evaporator unit will be Ceiling Mounted with suitable Air flow as per design requirement. For Deatiled Specifications Please Reffer Techniacl Document Refrigeration Works.
1
-
-
... More
Installation & Comissioning of Raw & Finished material Chill Room :
1
-
-
... More
Supply of Refrigeration & Puf Panels & Accessories for Fish Processing Hall :Designed Room temperature (+)20°C ± 5°C , Product to be processed : Fish / Sea food, No of Chambers: 2Nos Room Description: 2 no's. of 11.50 x 15.28 x 5.0 m ( clear dimensions) insulated with 80 mm thick PUF insulation for Walls & Celieng with 0.5 mm PPGI/PCGI lamination. Doors : 1200 x 900 mm Chute Door -4 No's with suitable Air curtain , Single Leaf Swing Door (Face Mounted) 80 mm thick PUF insulation with 0.6 mm PPGI/PCGI lamination on both sides. PPGI wall frame on tFour sides for Chute door, Raising hinges, Handle, Key lock and necessary accessories. For Deatiled Specifications Please Reffer Technical Document Refrigeration Works. Type of refrigeration system : Split Type Type of Cooling: DX Type Capacity of Refrigeration system [KW] : 12 kW per Processing hall Type of Refrigerant: R404a / R134a / R407C Type of compressor: Scroll type Hermetic compressor with Suitable Canopy for Condensing Unit Type of Condenser: Air Cooled - 4 no's (Two for each Processing hall) Type of Evaporator unit: Forced Air Cooled. 6 KW capacity, Two No's per Fish processing Hall with GI Powder Coated casing, Copper tubes of suitable length, Aluminium fins. The evaporator unit will be Ceiling Mounted with suitable Air flow as per design requirement. For Deatiled Specifications Please Reffer Techniacl Document Refrigeration Works.
1
-
-
... More
Installation & Comissioning of Fish Processing Hall :
1
-
-
... More
Supply of Puf Panels, Accessories & Storage Rack for Chemical Room : Chamber Size: 4.0 x 3.0 x 5.0 m ( clear dimensions) No. of Chamber : 2No.s Product to be stored: Dry & Wet Chemicals etc..Room Description: 2 no's. of 4.0 x 3.0 x 5.0 m ( clear dimensions) insulated with 80 mm thick PUF insulation for Walls & Celieng with 0.5 mm PPGI/PCGI lamination . Door: 1200 x 2100 mm Room Door -2 No & 1200 x 900 mm Chute Door -2 No's with suitable Air curtain (4 No's) , Single Leaf Swing Door (Face Mounted) 80 mm thick PUF insulation with 0.6 mm PPGI/PCGI lamination on both sides. PPGI wall frame on three sides for Hall door & Four sides for Chute door, Raising hinges, Handle, Key lock and necessary accessories. **For Deatiled Specifications Please Reffer Techniacl Document Refrigeration Works. Flat Angled Rack System for Storage of Chemicals: "Supplied for Two Rooms" A. No. of Bays: 4 No’s, B. Size of each Bay: 900 L x 450 D x 2450 H, C. No. of Panels (Shelves) in each Bay: 5 No’s, D. Size of each Panels (Shelve): 900 L x 450 D x 612 H, E. Total no. of Shelves ( 4bays x 5shelves) : 20 No’s, F. Load on each Shelve : 150 kg’s G. Load on each Bay : 750 kg’s
Material of construction: EN10025 – S235JR HR P&O
The uprights are Galvanized and Panels are Galvanized.
All racking components comply with the latest German safety regulation in DIN 18800.
The concrete of the floor will not have magnesite as a component to avoid the chemical reaction with the base plates, which will be galvanised.
All the fasteners will be galvanized
1
-
-
... More
Installation & Comissioning of Chemical Room :
1
-
-
... More
Designing, supplying, installing and Commissioning of Flake Ice Generator as per the follwing details and technical specifications: Flake ice Room is constructed with 80mm thick RPUF panel, Flake Ice generator should be made with Stainless Steel food grade quality freezing surface with machine accessories. Water Cooled condensing uint complete with shell & Tube Condenser with cooling tower/Evaporative type & Reciprocating/Screw type Semi-Hermetic/Open Compressor with suitable receiver and Control Panel. The refrigeration system shall be operating with CFC free R404a Freon gas, of suitable capacity with Water Cooled Condensing (Shell & Tube with Cooling Tower/Evaporative) Units located outside the rooms and the flake ice generator Units located inside the rooms with interconnecting copper piping & cabling works. The Water Cooled condensing unit with the semi-hermetic compressor shall be of same make with the necessary controls like HP/LP,Oil pressure cut out and Suction Accumulator, & Liquid line valves & Controls, Electrical Contral panel with the Complete system.The condensing units shall be worked with the maximum ambient conditions of 40 Deg C & The expansion valves shall be of TEXV/Electronic type for precising the refrigerat flow to the flake ice generator based on the various load conditions. GI Water Piping between cooling Tower to Condensing uint with necessery NRV, Strainers & Valves, Water pumps for water circulation. Detailed design calculations showing the engineering design details to prove the capability of the refrigeration system to achieve the intended temperature and other parameters.The job shall also include to supply and installing insulation to refrigeration suction piping along with GI/rubber cladding All the necessary electrical fixtures and control panel board including all the switches, breaker and control points required for the refrigration system should be propoerly designed and installed as per the IS standards. The quoted rate shall also to include all gurantees/warrantees for the all mechanical parts, works , training of clients technicians, supplying operating manuals etc. The rate shall include all taxes, duties, transpotaion charges, labour and handling charges etc **For Deatiled Specifications Please Reffer Techniacl Document Refrigeration Works.
-
-
-
... More
Supply of Flake Ice Generator, Refrigeration & Puf Panels & Accessories for Flake Ice Room : Designed temperature (-)24°C to (-)27°C Product: Flake Ice, Capacity: 10 MTPD No of Chambers: 2 Nos Room Description: 2 no's. of 3.0 x 3.0 x 5.0 m ( clear dimensions) insulated with 80 mm thick PUF insulation for Walls & Celieng with 0.5 mm PCGI/PCGI lamination & 80mm thick PUF slab for floor Insulation . Door: 1200 x 2100 mm Room Door -2 No with suitable PVC strip curtain , Single Leaf Swing Door (Face Mounted) 80 mm thick PUF insulation with 0.6 mm PCGI/PCGI lamination on both sides. PPGI wall frame on three sides, & Raising hinges, Handle, Key lock and and emergency release opner from inside & floor Sill.**For Deatiled Specifications Please Reffer Techniacl Document Refrigeration Works. Type of refrigeration system : Flake ice generator with Complete System (Total Qty: 2nos) One per Chamber Type of Cooling: DX Type Capacity of Refrigeration system [KW] : 64 kW per Chamber Type of Refrigerant: R404a Type of compressor: Reciprocating /Screw type Semi Hermetic Compressor with Suitable Canopy for Condensing Unit Type of Condenser: Water Cooled : Shell & tube/ Evaporative Flake Ice Thickness: 1.5mm to 2mm Flake Ice Generator with SS MOC Cooling Surface & Complete package with Control Panel.
1
-
-
... More
Installation & Comissioning of Flake Ice Room :
1
-
-
... More
Supply of Personal Lockers for Men & Women Changing rooms 1 Set : 15
locker's, Each Locker Size ; 900 W x 400 D x 370 H (approx), Manufactured
by prime quality CRCA cold rolled close annealed" Steel sheets Body and
drawers made from 22 gauge steel sheets (0.8mm) Locking facility available with a
duplicate key Card holder provided at the door Air- vent opening provided at the
door Total 15 numbers of individual lockers
6
-
-
... More
Supply of SS Work Benchs 1500 mm long X 2500 mm width x 900mm height
WORKING TABLES:S.S.304 working tables to be used in Food Processing industry,
As a part of the project, we need SS working Tables (hygienic design) . For manual
grading and sorting, Processing of Fish’s prior to further processing. The
design of S.S tables should be with water Pipe & 6 taps, drainage connection
pipe / Broder for washing/draining and border
1
-
-
... More
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes,
channels, plates etc., including welding, grinding, buffing, polishing and making
curvature (wherever required) and fitting the same with necessary stainless steel nuts
and bolts complete, i/c fixing the railing with necessary accessories & stainless steel
dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the
side of waist slab with suitable arrangement as per approval of Engineer-in-charge,
(for payment purpose only weight of stainless steel members shall be considered
excluding fixing accessories such as nuts, bolts, fasteners etc.)
300
-
-
... More
Supply of SS Work Benchs 1500 mm long X 2500 mm width x 900mm heigh
24
-
-
... More
Supply of Personal Lockers for Men & Women Changing rooms 1 Set : 15
locker's, Each Locker Size ; 900 W x 400 D x 370 H (approx)
6
-
-
... More
60 KLD CAPACITY EFFLUENT TREATMENT PLANT & 10 KLD SEWAGE TREATMENT PLANT
-
-
-
... More
Planning, Designing, Engineering, Construction, Procurement, Installation, Testing & Commissioning of proposed 60 KLD Effluent Treatment Plant (ETP) including coarse screen chamber, collection sump with ozanisation facility, pumping
machinery, DAF, Anoxic tank, areation tank (MBBR), sludge settling tank, clear water tank, pressure sand filter, activated carbon filter, treated water tank (20KL capaity), sludge drying bed, or any other structure / component required for smooth and
efficient functioning / performance of the plant, etc. The job includes all civil, electro mechanical and instrumentation works required for the ETP for its functioning and smooth operation. The ETP shall be designed for the parameters and design as
mentioned in the technical specifcations.
1
-
-
... More
Designing, Engineering, Construction, Procurement, Installation, Testing & Commissioning of proposed 10 KLD Sewage Treatment Plant (STP) skid mounted type in MSEP ( mild steel with expoxy painted) construction. The outlet of the treatment plant shall confirm KSPCB and CPCB norms as per guidelines.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%