Kerala State Industrial Development Corporation Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 5,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_KSIDC_265748_1Bid Award Id
ViewTender No
KSIDC/KIZ PALAKKAD/SDF2/1/2018-19 Dt. 5.02.2019Tender Authority
Kerala State Industrial Development Corporation ViewPurchaser Address
-Website
http://https://www.ksidc.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Up to 1 km.
2249
-
-
1 to 2 km.
74
-
-
2 to 3 km.
74
-
-
3 to 4 km.
74
-
-
4 to 5 km.
74
-
-
Excavated rock
-
-
-
Up to 1 km.
88
-
-
1 to 2 km.
38
-
-
2 to 3 km.
38
-
-
3 to 4 km.
38
-
-
4 to 5 km.
38
-
-
Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m :
-
-
-
All kinds of soil
6708
-
-
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
-
-
-
All kinds of soil
3456
-
-
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.
-
-
-
Ordinary rock
738
-
-
Hard rock (requiring blasting)
46
-
-
Hard rock (blasting prohibited)
46
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m inwidth or 10 sqm on plan),including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil anddisposal of surplus excavated soil as directed, within a ead of 50 m.
-
-
-
All kinds of soil
2222
-
-
Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.
-
-
-
Ordinary rock
1368
-
-
Hard rock (requiring blasting)
15
-
-
Hard rock (blasting prohibited)
15
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
3267
-
-
Excavating, supplying and filling of local earth (includingroyalty) by mechanical transport up to a lead of 5km, alsoincluding ramming and watering of the earth in layers notexceeding 20 cm in trenches, plinth, sides of foundation etc.complete
3428
-
-
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
-
-
-
All kinds of soil
110
-
-
Ordinary or hard rock
2044
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
14
-
-
Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.
-
-
-
All kinds of soil
12916
-
-
Supplying chemical emulsion in sealed containers including delivery as specified.
-
-
-
2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
3062
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
"1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).
2
-
-
1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size).
204
-
-
1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
239
-
-
1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size).
13
-
-
Providing and laying cement concrete in retaining walls, return walls,walls (any thickness) including attached pilasters, columns, piers,abutments, pillars, posts, struts buttresses, string or lacing courses,parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor,etc., up to floor five level, excluding the cost of centering,shuttering and finishing :
-
-
-
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
24
-
-
Centering and shuttering including strutting, propping etc. and removal of form work for :
-
-
-
Foundations, footings, bases for columns
343
-
-
Columns, piers, abutments, pillars, posts and struts
231
-
-
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
6
-
-
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.
2
-
-
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
6
-
-
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
90
-
-
REINFORCED CEMENT CONCRETE: Providing and fixing in position 12mm thick bitumen impregnated fiber board conforming to IS: 1838, including cost of primer, sealing compound Grade-A in expansion joints.
277
-
-
Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20mm nominal size).
5
-
-
FORM WORK: Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete
655
-
-
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
1180
-
-
Suspended floors, roofs, landings, balconies and access platform
6256
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers
663
-
-
Columns, Pillars, Piers, Abutments, Posts and Struts
3069
-
-
Stairs, (excluding landings) except spiral-staircases
97
-
-
Vertical and horizontal fins individually or forming box louvers
band, facias and eaves boards
11
-
-
Extra for shuttering in circular work (20% of respective centering and shuttering items)
49
-
-
Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like
55
-
-
Edges of slabs and breaks in floors and walls
-
-
-
Under 20 cm wide
1079
-
-
Above 20 cm wide
33
-
-
Weather shade, Chajjas, corbels etc., including edges
346
-
-
Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick
50
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick
4277
-
-
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).
-
-
-
Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
6744
-
-
Steel (Fe 500)
-
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more
96995
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500 D or more.
252544
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering,shuttering,finishing and reinforcement,includingadmixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.
-
-
-
“(Note:-Cement contentconsidered in this item is @ 330 kg/cum.“Excess/ less cement usedas per design mix is payable/recoverable separately).
-
-
-
All works upto plinth level
735
-
-
All works above plinth level upto floor V level
1806
-
-
Add for using extra cement in the items of design mix over and above the specified cement content therein.
5
-
-
Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints.
-
-
-
200 mm wide.
63
-
-
BRICK WORK: Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
780
-
-
Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).
120
-
-
STONE WORK: Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :
-
-
-
Cement mortar 1:6 (1 cement : 6 coarse sand)
5
-
-
MARBLE & GRANITE WORK: Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanitycounters, window sills, facias andsimilar locations of required size,approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
-
-
-
Granite of any colour and shade
-
-
-
Area of slab upto 0.50 sqm
2
-
-
Area of slab over 0.50 sqm
11
-
-
Providing edge moulding to 18 mm thick marble stone counters, Vanitiesetc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
-
-
-
Granite work
18
-
-
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
18
-
-
Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
19
-
-
Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.
13
-
-
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
-
-
-
Granite Stone of approved shade
14
-
-
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :
-
-
-
Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
177
-
-
WOOD & PVC WORK: Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).
-
-
-
Second class teak wood
1
-
-
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.
-
-
-
Second class teak wood
-
-
-
35 mm thick shutters
7
-
-
Providing and fixing panelling or panelling and glazing in panelled orpanelled and glazed shutters for doors, windows and clerestory windows(Area of opening for panelinserts excluding portion inside grooves orrebates to be measured). Panelling for panelled or panelled and glazedshutters 25 mm to 40 mm thick :
-
-
-
Second class teak wood
7
-
-
Float glass panes
-
-
-
4 mm thick glass pane
2
-
-
5.5 mm thick glass panes
11
-
-
Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction withframe of 1st class hard wood andwell matched commercial 3 plyveneering with vertical grains or cross bands and face veneers on bothfaces of shutters:
-
-
-
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
31
-
-
Extra for providing lipping with 2nd class teak wood battens 25 mmminimum depth on all edges of flush door shutters (over all area of doorshutter to be measured).
31
-
-
Extra for providing vision panel not exceeding 0.1 sqm in all type of flushdoors (cost of glass excluded) (overall area of door shutter to bemeasured):
-
-
-
Rectangular or square.
31
-
-
Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).
31
-
-
Providing and fixing wooden moulded beading to door and window frameswith iron screws, plugs and priming coat on unexposed surface etc. complete :
-
-
-
2nd class teak wood
-
-
-
50 x 20 mm
110
-
-
Providing and fixing M.S. grills of required pattern in frames of windowsetc. with M.S. flats, square or round bars etc. including priming coatwith approved steel primer all complete.
-
-
-
Fixed to openings /wooden frames with rawl plugs screws etc.
9511
-
-
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
233
-
-
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :
-
-
-
125X64X1.90 mm
10
-
-
100X58X1.90 mm
233
-
-
Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:
-
-
-
100x75x4 mm
66
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868 ) transparent or dyedto required colour or shade, with necessary screws etc. complete :
-
-
-
150x10 mm
44
-
-
Providing and fixing aluminium handles, ISI marked, anodised (anodiccoating not less than gradeAC 10 as per IS : 1868) transparent or dyedto required colour or shade, with necessary screws etc. complete :
-
-
-
100 mm
22
-
-
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
109
-
-
Providing and fixing to existing door frames.
-
-
-
30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.
35
-
-
Providing and fixing bright /matt finished Stainless Steel handlesof approved quality & make with necessary screws etc allcomplete.
-
-
-
125 mm
34
-
-
100mm
42
-
-
STEEL WORK: Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3 mm M.S. gusset plates at the junctions and corners,all necessary fittings complete, including applying a priming coat of approved steel primer.
-
-
-
Using M.S. angles 40x40x6 mm for diagonal braces
2
-
-
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.
-
-
-
80x1.25 mm M.S. laths with 1.25 mm thick top cover
213
-
-
Providing and fixing ball bearing for rolling shutters.
49
-
-
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
-
-
-
Hot finished welded type tubes
1307
-
-
Structural steel work riveted, bolted or welded in built up sections,trusses and framed work, including cutting, hoisting, fixing in position andapplying a priming coat ofapproved steel primer all complete.
825
-
-
Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steeletc. as required.
-
-
-
In stringers, treads, landings etc. of stair cases, including useof chequered plate wherever required, all complete
110
-
-
In gratings, frames, guard bar, ladder, railings, brackets, gatesand similar works
1289
-
-
Providing and fixing hand rail of approved size by welding etc. to steelladder railing, balcony railing, staircase railing and similar works,including applying priming coat ofapproved steel primer.
-
-
-
M.S Tube
5
-
-
Providing and fixing carbon steel galvanised ( minimum coating 5 micron)dash fastener of 10 mm dia double threaded 6.8 grade (yield strength480 N/mm2), counter sunkhead,comprising of 10 m dia polyamide PA6 grade sleeve, including drilling of hole in frame , concrete/ masonry,etc. as per direction of Engineer-in-charge.
-
-
-
10 x 80 mm
5
-
-
10 x 120 mm
34
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishingand making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainlesssteel bolts etc., of required size, on the top of the floor or the side ofwaist slab with suitable arrangement as per approval of Engineer-incharge, (forpayment purpose only weight of stainless steel membersshall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.).
3155
-
-
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :
-
-
-
5.5 mm thick glass panes
1
-
-
FLOORING: Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate) finished with a floating coat of neat cement, includingcement slurry, but excluding thecost of nosing of steps etc. complete.
-
-
-
40 mm thick with 20 mm nominal size stone aggregate
1562
-
-
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).
-
-
-
Light shade pigment using white cement
158
-
-
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
-
-
-
25 mm thick
1030
-
-
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
101
-
-
Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.
292
-
-
Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 1.05 metre.
101
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
543
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.
-
-
-
Size of Tile 600x600 mm
33
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.
-
-
-
Size of Tile 600x600 mm
3
-
-
ROOFING: Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.
10
-
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
-
-
-
2.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part I
157
-
-
Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mmnominal thickness and of approved size and as per approvedpattern on steel frame work complete (steel frame work to be paidseparately).
128
-
-
Providing & laying on roof pressed clay tile ridge (Mangalore tile)of 20mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately).
23
-
-
FINISHING:12 mm cement plaster of mix :
-
-
-
1:4 (1 cement: 4 fine sand)
15185
-
-
20 mm cement plaster of mix :
-
-
-
1:4 (1 cement: 4 coarse sand)
284
-
-
6 mm cement plaster of mix :
-
-
-
1:3 (1 cement : 3 fine sand)
7359
-
-
Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand).
75
-
-
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers
30
-
-
Extra for plastering exterior walls of height more than 10 m fromground level for every additional height of 3 m or part thereof.
2409
-
-
Providing and applying plaster of paris putty of 2 mm thickness overplastered surface to prepare the surface even and smooth complete
8373
-
-
White washing with lime to give an even shade :
-
-
-
New work (three or more coats)
6077
-
-
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :
-
-
-
New work (two or more coats) over and including waterthinnable priming coat with cement primer
8189
-
-
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:
-
-
-
New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
575
-
-
Applying priming coat:
-
-
-
With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
75
-
-
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works
74
-
-
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
-
-
-
Two or more coats on new work
1570
-
-
Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge :
-
-
-
20 mm wide and 15 mm deep groove
904
-
-
Melamine polishing on wood work (one or more coat).
16
-
-
ROAD WORK: Preparation and consolidation of sub grade with power road roller of8 to 12 tonne capacity after excavating earth to an average of 22.5cm depth, dressing to camber andonsolidating with road rollerincluding making good the undulations etc. and re-rolling the subgrade and disposal of surplus earth with lead upto 50 metres.
2416
-
-
Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density).
1271
-
-
Supplying and stacking at site.
-
-
-
Good earth
3090
-
-
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.
-
-
-
With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30
382
-
-
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge.
382
-
-
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
293
-
-
Painting road surface marking with adequate nos of coats to giveuniform finish with ready mixed road marking paint conforming to IS: 164, on bituminous surface inwhite/yellow shade, including cleaningthe surface of all dirt, scales, oil, grease and foreign material etc.
complete.
-
-
-
New work (two or more coats)
127
-
-
Providing and fixing G.I. chain link fabric fencing of required width inmesh size 50x50 mm including strengthening with 2 mm dia wire ornuts, bolts and washers as requiredcomplete as per the direction ofEngineer-in-charge.
-
-
-
Made of G.I. wire of dia. 4 mm, PVC coated to achieveouter dia not less than 5 mm in required colour and shade
136
-
-
Providing and laying factory made chamfered edge Cement Concrete paver blocks In Road work of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineerin-Charge.
-
-
-
80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern.
2415
-
-
DRAINAGE: Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
48
-
-
Supplying and fixing C.I. cover without frame for manholes :
-
-
-
455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg
10
-
-
ALUMINIUM WORK: Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
For fixed portion
-
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron)
95
-
-
For shutters of doors, windows & ventilators includingproviding and fixing hinges/ pivots and making provisionfor fixing of fittings wherever required including the costofEPDM rubber / neoprene gasket required (Fittingsshall be paid for separately)
-
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron)
79
-
-
Providing and fixing glazing in aluminium door, window, ventilatorshutters and partitions etc. with EPDM rubber / neoprene gasketetc. complete as per the architecturaldrawings and the directionsof Engineer-in-charge . (Cost of aluminium snap beading shall bepaid in basic item):
-
-
-
With float glass panes of 5.50 mm thickness
16
-
-
Filling the gap in between aluminium frame & adjacent RCC/ Brick/Stone work by providing weather silicon sealant over backer rod ofapproved quality as per architectural drawings and direction of Engineer-in-charge complete.
-
-
-
Upto 5mm depth and 5 mm width
44
-
-
WATER PROOFING: Providing and laying water proofing treatment to vertical and horizontalsurfaces of depressed portions of W.C., kitchen and the likeconsisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed withwater proofing compound conforming to IS 2645 in recommendedproportions including rounding off junctionof vertical andhorizontal surface.(iv) (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarsesand) mixed with water proofing compound in recommendedproportion including rounding off junction ofvertical and horizontalsurface.(iii) IIIrd course of applying blown or residual bitumin applied hot at 1.7kg per sqm area (iV) IVth course of 400 micron thick PVC sheet. (Overlaps at joints ofPVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/ sqm).
158
-
-
Providing and laying water proofing treatment on roofs of slabs byapplying cement slurry mixed with water proofing cement compoundconsisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately.For the purpose of measurement the entire treated surface will be measured.
2299
-
-
Providing and Placing in position suitable PVC water stopsconforming to IS:12200 for construction/ expansion joints betweentwo RCC members and fixed to the reinforcementwith binding wirebefore pouring concrete etc. complete :
-
-
-
Serrated with central bulb (225 mm wide, 8-11 mm thick)
169
-
-
NON SCHEDULE ITEMS - CIVIL : Diluting and injecting of chemical emulsion for pre constructional anti termite treatment and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, treatment of soil under apron is to be laid, top surface of plinth filling junction of wall and floor, along with the external perimeter of the building, expansion joint, surrounding of pipes and conduits etc., complete as per IS:6313 (plinth area of the building at ground floor only shall be measured for payment).(Rate excluding the cost of chemical emulsion)
2389
-
-
Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 (1 cement : 6 coarse sand) etc complete.The rate shall include labour, tax, transport ,lead,Lift ,scaffolding and curing etc complete as per specification.
214
-
-
Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 (1 cement : 6 coarse sand) etc complete.The rate shall include labour, tax, transport ,lead,Lift ,scaffolding and curing etc complete as per specification.
578
-
-
Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level up to floor V level thickness 20cm and above in: CM 1:6 (1 cement : 6 coarse sand) etc complete.The rate shall include labour, tax, transport ,lead,Lift ,scaffolding and curing etc complete as per specification
298
-
-
Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part I of 1979 for Super structure up to floor two level for 10 cm thick wall in: CM 1:6 (1 cement : 6 coarse sand) including cost of scaffolding etc complete.The rate shall include labour, tax,transport ,lead,Lift , scaffolding and curing etc complete as per specification
25
-
-
Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part I of 1979 for Super structure above floor two level upto floor five level for 10 cm thick wall in: CM 1:6 (1 cement : 6 coarse sand) including cost of scaffolding etc complete.The rate shall include labour, tax, transport ,lead,Lift ,scaffolding and curing etc complete as per specification
54
-
-
Providing and laying 300x 300 mm sizes Anti skid vitrified floor tiles of slip factor 0.5 -0.6 (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments ,labour, tax, transport,,all lead, lift etc., complete.
193
-
-
Providing and laying 18mm thick Flamed finish granite of approved colour for staircase tread / landing including nosing and 2 nos 6 X 6 mm anti slip grooves and filled with carborandum powder mixed with Araldite or equal adhesives (colour of granite as approved by Engineer) all laid over base cement mortar 1:4 upto 30mm thick, with ordinary Portland cement, jointed with / without groove, with white cement slurry mixed with pigment to match shades of granite including all finishing, all as required, as per specifications and drawings and as directed complete .including all material ,labour ,tax ,transport etc to complete.
40
-
-
Providing and laying 18mm thick Flamed finish granite slab of approved colour for riser of steps / skirting over prepared base on 12mm (average) thick white cement mortar 1:3 (1 cement : 3 coarse sand), for bedding and joints all complete (colour of granite as approved by engineer)the rate including all material ,labour ,transport etc to complete .
35
-
-
Providing and laying brick aggregate cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 brick aggregate ) with 40mm brick aggregate to a required depth and filling layers of 150mm each in toilets (sunken floor) at all levels with contractor's material, labour, tools and plants including lead and lifts etc as per the directions of the Engineer-in-charge.
39
-
-
Supplying & Laying of 0.5mm Corrugated Color coated Galvalume steel sheet of 150gms/col:30-35µ at all heights using regular polyster (RMP) paint coated 0.5 mm TCT 550 Mpa profiled galvalume steel including cutting, fabricating erection at all levels, providing openings, touchup painting, all fixtures and fixing accessories such as self drilling fasteners, butyl or acrylic sealants, profiled foam / neoprene fillers etc., including cost of all materials, labour, scaffolding, wastage, tools, tackles, equipments, transportation etc., all complete as per specification, drawings and as directed.
81
-
-
Supplying, fabrication and erection of Cold Roll Formed GI 'C' purlins (yield strength of 340 to 345 mpa ) with raw material confirming to IS 277 as per standard specification.The coating mass of purlins will be 275 ± 5 gsm. Rate including all material, labour charges, transportation, cutting, welding, erection, scaffolding, taxes, all lead, lift, all necessary bolts ,nuts & washers etc complete.
490
-
-
Supplying & Laying of 0.5mm TCT Color coated Galvalume sheet Ridge Piece with necessary lappings including cost of bolts, nuts, screws, taxes, scaffolding, Transportation, all lead, lift,labour charges, etc complete as per standard specifications.
9
-
-
Applying two coats of enamel paint for Roof truss & Structural steel works etc. over one coat of primer including scraping and cleaning (including cost of paint, primer, necessary ,transport,tax,scaffolding & labour etc complete.)
1
-
-
Puff door: Supplying & fixing GI flush door made outer frame of size 100x50mm ,shutter of 35mm thk(both side 0.8mm thick) .GI sheet in between filled with poly-urethane honey core form.Door and shutter fixed with male & female GI hinges.Outer frame fixed to the plaster wall using hold fast,10" SS Aldrop & 6" Power coated tower bold .The door shutter finished with two coates of Epoxy coating Etc.The rate shall includes all labour ,tax, transport, lead, lift, necessary fixing accessories etc to complete as direction by engineer in charge .
17
-
-
Supplying & fixing Aluminium Anodized Sliding Door for physically challenged persons as per detailed architectural drawings, made of 100x44 mm rectangluar box section ,85x44mm door vertical section,95x44mm door top and middle section and finished with 12mm prelaminated partical board ,glazing clips , 2 no touch lock (Handle cum lock),1 baby latch 3" & standard accessories for the easy accessibility of physically challenged persons etc complete., Rate including all material, all labour charges,all lead, lift, transportation, taxes etc complete.
8
-
-
Providing & fixing of glazed uPVC Sliding Window .They will be manufactured/ fabricated using multi chambered uPVC sections/profiles with EPDM gaskets having isolated drainage, reinforced with GI sections(120 gsm) through out and welded at corners through fusion welding. The dimensions of uPVC Profiles will be for outer frame - 60mm(W)±6x 50mm(H) ±6mm and sash - 35mm(W)±6 x 64mm(H) ±6mm. Outer Wall thickness of uPVC outer frame & sash shall be 2.5mm ±0.3mm, Windows shall be provided with 5mm clear glass, including standard hardware such as single point locking hardware. The windows will be installed using anchor fasteners, silicon sealant, easy glazing/deglazing at site etc. including cost and conveyance of all material,lead & lift, accessories, labour charges , transportation, erection at site complete for finished item of work.
618
-
-
Providing & fixing of UPVC Fixed glass Window . The Window will be manufactured/ fabricated using multi chambered uPVC sections/profiles with EPDM gaskets having isolated drainage, reinforced with GI sections(120gsm) thickness of 1mm - 2mm throughout and welded at corners through fusion welding. The dimensions of uPVC Profiles will be for Outer Frame- 54mm(W)±6 x 55mm(H) ±6mm and mullion - 54mm(W)±6 x 76mm(H) ±6mm. Outer Wall thickness of uPVC Profiles shall be 2.5mm ±0.3mm .they shall be provided with 5 mm clear glass and standard hardware. The Ventilators will be installed using anchor fasteners, silicon sealant etc. including cost and conveyance of all material, lead & lift,accessories, labour charges ,transportation, erection at site complete for finished item of work.
77
-
-
Providing & fixing of uPVC top hung Ventilator . The ventilator will be manufactured/fabricated using multi chambered uPVC sections/profiles with EPDM gaskets having isolated drainage, reinforced with GI sections(120gsm) thickness of 1mm - 2mm throughout and welded at corners through fusion welding. The dimensions of uPVC Profiles will be for Outer Frame- 54mm(W)±6 x 55mm(H) ±6mm and mullion - 54mm(W)±6 x 76mm(H) ±6mm. Outer Wall thickness of uPVC Profiles shall be 2.5mm ±0.3mm . Ventilator Louvers shall be provided with 4 mm Pin Head glass and standard hardware. The Ventilators will be installed using anchor fasteners, silicon sealant etc. including cost and conveyance of all material, lead & lift,accessories, labour charges ,transportation, erection at site complete for finished item of work.
354
-
-
Providing & fixing of Fixed Louvered uPVC Ventilator . The ventilator will be manufactured/ fabricated using multi chambered uPVC sections/profiles with EPDM gaskets having isolated drainage, reinforced with GI sections(120gsm) thickness of 1mm - 2mm throughout and welded at corners through fusion welding. The dimensions of uPVC Profiles will be for Outer Frame- 54mm(W)±6 x 55mm(H) ±6mm and mullion - 54mm(W)±6 x 76mm(H) ±6mm. Outer Wall thickness of uPVC Profiles shall be 2.5mm ±0.3mm . Ventilator Louvers shall be provided with 4 mm Pin Head glass and standard hardware. The Ventilators will be installed using anchor fasteners, silicon sealant etc. including cost and conveyance of all material, lead & lift,accessories, labour charges ,transportation, erection at site complete for finished item of work.
41
-
-
Providing and fixing SS tower bolts (304 grade) with necessary screws/ fixing accessories (as approved by engineer in-charge) Rate including all material, all labour charges,all lead, lift, transportation, taxes etc complete.
-
-
-
300x10 mm
34
-
-
100x10 mm
44
-
-
Providing and fixing hydralic door closer of rack and pinion type with standard arm, silver finish (as approved by engineer in-charge) with necessary screws / fixing accessories. Rate including all material, all labour charges,all lead, lift, transportation, taxes etc complete.
16
-
-
Providing and fixing SS Hanging floor door stopper (304 grade) (as approved by engineer in-charge) with necessary screws / fixing accessories. Rate including all material, all labour charges,all lead, lift, transportation, taxes etc complete.
16
-
-
Providing and fixing bright finished SS Mortice lock (304 grade) (as approved by engineer in-charge) with necessary screws / fixing accessories. Rate including all material, all labour charges,all lead, lift, transportation, taxes etc complete.
14
-
-
Providing and fixing bright finished SS aldrop (304 grade) (as approved by engineer in-charge) with necessary screws / fixing accessories. Rate including all material, all labour charges,all lead, lift, transportation, taxes etc complete.
-
-
-
300x16 mm
2
-
-
Supplying & Fixing Motorized Rolling Shutters with compact gear of three station push button with deadman control with required size . Curtain made of single skinned galvalume steel laths with natural finish.bottom profile made of bend resistant double skinned extruded aluminium profile with one coat of epoxy primer by spray.the bottom rail is fitted with extruded rubber bottom seal that will seal against the floor when the door is fully closed. The shaft is manufactured from mild steel tube of suitable outside diameter and wall thickness to suit the shutter application and is unsprung.the side guides of 2mm thick heavy duty TG galvanised steel. The rate shall inclusive of all leads and lifts,equipments,tax,transport ,necessary fixing accessories , labour charges etc., complete and as directed by the engineer incharge.
1
-
-
Providing and painting exterior walls with 2 coats of exterior weather proof emulsion paint ( low voc) over 1 coat of primer (low voc) of approved brand and manufacture to give an even shade. Rate including all material, labour charges, scaffolding,all lead, lift, transportation, taxes etc complete.
6460
-
-
Supplying and fixing of 24 gauge Chicken mesh including necessary nails for RCC / Masonry joints including labour charges etc., at all levels and locations, including preparing surfaces, scaffolding and as per drawings, specifications and as directed by Engineer-in-charge.
789
-
-
Supplying & fixing PVC corner beading (size 7mm or 10.5mm) for toilets complete etc., Rate including all material, all labour charges,all lead, lift, transportation, taxes etc complete.
109
-
-
Water proofing for sump: Providing and applying two coat of polymer modified cementitious waterproof coating Brushbond . Brushbond shall contain a liquid polymer component and a cementitious powder component, which shall be mixed as per manufacturer’s instructions and applied over prepared concrete surface strictly maintaining the coverage specified by the manufacturer. The applied material of should have a weight loss of less than 1gm when tested for abrasion resistance according to ASTM- D4060,Tensile strength as per ASTM 2N/mm2 Adhesion to concrete is greater than 1N/mm2 and static crack accommodation of 1mm according to ASTM-C836 includes surface preparations, injection grouts, coving, application and complete as per the manufactures methodology . The rate shall include all necessary labour,transport,taxall lead, lift etc to complete as per direction engineer in-charge at all levels.
197
-
-
Manufacturing, supplying and fixing glazed "N" type ventilators of required size, made out of 25x25x6mm angles for horizontal and vertical members alround, 25x6mm flat - 4 Nos as stiffeners, the gap fixed with 10 gauge weld mesh of size 1" x 1" , 4mm thick pin head glass fixed with glass putty, painting one coat of zinc chromite primer.The rate shall includes all labour ,tax, transport, lead, lift, necessary fixing accessories etc to complete as direction by engineer in charge .
9
-
-
Roll form Window: Providing and fixing Openable windows fabricated from roll formed sections made of galvanized steel Colour Coated / Powder Coated (Base Steel as per IS 513 "D" quality, Galvanized as per IS 277 with Zinc of 120 grams/Sqm) with total coated thickness of 0.6mm. Pre-painted shutter frame should be of 46mm x 46mm and External frame should be of 46mm x 52mm. Section for glass Beading should be of 18mm x 25mm and center mullion should be of 46mm x 70mm.Coated Sections should be with Primer Coat of Epoxy Primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder upto 50-60 microns thick. The frame & shutter Section should be cut to length and miter joined with corner bracket made of glass filled nylon. Mullion section should be joined wih frame using Nylon mullion cap Ethyi Propylene Diamine Monomer (EPDM) Gasket should be used all around glass in shuter, between frame and glazed shutter and both side of fixing glass. Glass shutter should be provided with 4mm thick Plain Glass for openable portion.Handle made of high grade Aluminum Powder Coated and with nylon receiver. Gaskets made of Ethyl Propylene Diamine Monomer (EPDM). Corner brackets made of glass filled Nylon. Mullion caps made of glass filled nylon. The Rate Inculding All Necessary Fittings, all labour,Transport,Tax etc., Complete.
14
-
-
Supplying and fixing CPVC rain water spout pipe of 25mm dia for sunshade (100 to 300mm length) with CPVC Tee etc complete. Rate including all material, all labour charges,all lead, lift, transportation, taxes etc complete.
126
-
-
PLUMBING WORKS :Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.
-
-
-
All kinds of soil
63
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed.
-
-
-
Ordinary rock
10
-
-
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
-
-
-
All kinds of soil
-
-
-
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
161
-
-
Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5 metre).
-
-
-
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
10
-
-
Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m :
-
-
-
Ordinary rock :
-
-
-
Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia
20
-
-
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
In stringers, treads, landings etc. of staircases, including use of chequered plate wherever required, all complete
152
-
-
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
10
-
-
ROOFING:Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
15
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
75 mm diameter
8
-
-
110 mm diameter
203
-
-
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
Coupler
-
-
-
75 mm
3
-
-
110 mm
14
-
-
Single pushfit Coupler
-
-
-
75 mm
3
-
-
110 mm
14
-
-
Single tee with door
-
-
-
75x75x75 mm
3
-
-
110x110x110 mm
14
-
-
Single tee without door
-
-
-
75x75x75 mm
3
-
-
110x110x110 mm
14
-
-
Bend 87.5°
-
-
-
75 mm bend
6
-
-
110 mm bend
28
-
-
Shoe (Plain)
-
-
-
75 mm Shoe
6
-
-
110 mm Shoe
28
-
-
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
75 mm
13
-
-
110 mm
137
-
-
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
17
-
-
SANITARY INSTALLATIONS: Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
Kitchen sink with drain board
-
-
-
510x1040 mm bowl depth 200 mm
1
-
-
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
Semi rigid pipe
-
-
-
40 mm dia
21
-
-
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
3
-
-
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing:
-
-
-
Rectangular shape 1500x450 mm
6
-
-
Providing and fixing PTMT Bottle Trap for Wash basin and sink.
-
-
-
Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms
21
-
-
WATERSUPPLY WORKS: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
Internal work - Exposed on wall
-
-
-
15 mm nominal outer dia Pipes
5
-
-
20 mm nominal outer dia Pipes
5
-
-
25 mm nominal outer dia Pipes
99
-
-
32 mm nominal outer dia Pipes
33
-
-
40 mm nominal outer dia Pipes
27
-
-
50 mm nominal outer dia Pipes
3
-
-
62.5 mm nominal inner dia Pipes
15
-
-
75 mm nominal inner dia Pipes
15
-
-
100 mm nominal inner dia Pipes
3
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
-
-
-
Concealed work, including cutting chases and making good the walls etc.
-
-
-
15 mm nominal outer dia Pipes
42
-
-
20 mm nominal outer dia Pipes
114
-
-
25 mm nominal outer dia Pipes
12
-
-
32 mm nominal outer dia Pipes
48
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.
-
-
-
Internal work - Exposed on wall
-
-
-
25 mm nominal outer dia Pipes
30
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.
-
-
-
65 mm dia nominal inner dia .Pipes
91
-
-
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
-
-
-
50 to 80 mm nominal bore
2
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
25 mm nominal bore (PN 1.6)
5
-
-
20 mm nominal bore
1
-
-
32 mm nominal bore (PN 1.6)
2
-
-
40 mm nominal bore (PN 1.6)
1
-
-
50 mm nominal bore (PN 1.6)
1
-
-
65 mm nominal bore (PN 1.6)
8
-
-
80mm nominal bore (PN 1.6)
4
-
-
Providing and fixing ball valve (brass) of approved quality, High or low
pressure, with plastic floats complete :
-
-
-
20 mm nominal bore
2
-
-
25 mm nominal bore
2
-
-
Providing and fixing gun metal non- return valve of approved quality (screwed end) :
-
-
-
25 mm nominal bore
-
-
-
Horizontal
2
-
-
Vertical
2
-
-
Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length
-
-
-
20 mm nominal bore
60
-
-
Constructing masonry Chamber 30x30x50 cm inside, in brick wor in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with
C.I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand :10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :
-
-
-
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
2
-
-
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mmdeep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
-
-
-
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
-
-
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm
deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c
necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
-
-
-
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
-
-
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality
-
-
-
65 mm diameter pipe
91
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
1000
-
-
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
-
-
-
15 mm nominal bore
6
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 (a)
-
-
-
15 mm nominal bore
12
-
-
Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces,tapers etc if required will be paid separately
-
-
-
80 mm nominal bore
2
-
-
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
30
-
-
DRAINAGE WORKS: Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :
-
-
-
180x150 mm size P type
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58
kg and weight of frame 58 kg)
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
IInside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
5
-
-
Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design.
-
-
-
1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid forseparately.
-
-
-
With F.P.S. bricks class designation 75
1
-
-
Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to 2.29 m
-
-
-
With F.P.S. bricks class designation 75
2
-
-
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
12
-
-
Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and bend encased all-round with cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) with all centering and shuttering required, cutting holes in walls and making good with brick work in cement mortar 1:4 (1 cement : 4 coarse sand) plastered with cement mortar 1:3 (1 cement : 3 coarse sand) on inside of the manhole wall, lead caulked joints between sand cast iron pipes and fittings, stiff cement mortar 1:1 (1 cement : 1 fine sand) joints between sand cast iron tee and S.W. pipe, making
required channels complete as per standard design and specifications :
-
-
-
150 mm dia sand cast iron drop connection
1
-
-
Extra for depths beyond 60 cm of sand cast iron drop connection complete:
-
-
-
For 150 mm dia sand cast iron drop connection
10
-
-
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neatcement on walls and bed concrete etc. complete as per standard design:
-
-
-
Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
12
-
-
Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
Extra for depth beyond 45 cm of brick masonry chamber :
-
-
-
For 500x700 mm size
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
For 600x 850 mm size
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
NON SCHEDULE ITEMS
-
-
-
Providing and fixing Star white vitreous china extended wall mounting water closet of size 790x370x690 mm of approved shape including fixing of cistern with lid and dual flush fitting of flushing capacity 3/6 litre including chair brackets, EWC pan connector, necessary fittings including seat cover with all fittings and fixtures complete,angle valve with riser pipe including cutting and making good the walls and floors wherever required:
-
-
-
Star white Extended Wall mounted water closet constellation type, Adjustable Vitreous China Cistern with lid and White plastic seat (solid) cover with C.P. brass hinges and rubber buffers etc.,
18
-
-
Wash basin : Providing and fixing white vitreous china Counter top wash basin size 550 x 450 x 200mm, installed counter top at Granite / Marble counter with 15 mm C.P.brass basin tap, 32mm C.P brass waste coupling of standard pattern, including 2 each angle valve with riser pipes, connectors, adopters, all fittings etc cutting and making good the walls/slabs wherever required.(cut size it is recommended to make the cut in the marble/ Slab according to Wash Basin)
21
-
-
Flat back large urinals: Providing and fixing starwhite vitreous China flat back large urinals size - 375x390x590mm with self closing flush valve fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, and other couplings in C.P. brass, including all necessary fittings & fixtures complete with painting and making good the walls and floors wherever required.
18
-
-
Two way Bib cock: Supplying, fixing testing and commissioning of C.P.Brass two way bib cock with wall flange and aerator type with all fittings and fixtures complete of approved quality conforming to IS standards
18
-
-
Health faucet: Supply, fixing, testing and commissioning of HAND SHOWER (Health Faucet) near EWC consisting of 1mtrs. Long C.P. flexible tube with wall hook with all fittings and fixtures complete conforming to IS standards.
18
-
-
Providing and fixing C.P. Brass towel ring 180 dia with all necessary fittings with approved quality, complete as per standard specifications.
6
-
-
Supplying and fixing of Square & Round (125x125mm) aproximately Stainless Steel grating including GI hopper for connection of wash basin/ urinal with fittings, connectors & adopters.and all fittings etc., complete.
45
-
-
Supplying, fixing and commisioning of approved make & suitable model for Water Dispenser with purified normal hot and cold water outlets including all fittings and acessories complete.,
6
-
-
Providing & fixing hot dip galvanized proprietary factory fabricated supports including GI/SS fasteners, GI nut, bolts & washers, GI clamps, etc complete including cutting & chasing in brick / concrete wall and making same good.
5.3999999999999995
-
-
Providing and fixing soil, waste and vent pipes PVC pipes of IS 13592 (for Pipes) & IS 14735 (for fittings) Type - B, including all fittings and jointing of pipes, all kinds of support and the cost of cutting chases and making good the same including connectors, fittings testing of joints, a complete as per direction of Engineer-in-Charge
-
-
-
75mm dia pipes
57
-
-
100mm dia pipes
43
-
-
150mm dia pipes
65
-
-
Providing and fixing on wall face unplasticised Rigid PVC soil, waste and vent pipe fittings conforming to IS : 14735 Type B, including solvent cement joint
-
-
-
Coupler
-
-
-
75mm dia pipes
8
-
-
100mm dia pipes
11
-
-
150mm dia pipes
3
-
-
Single TEE with Door
-
-
-
(75x75x75mm)
3
-
-
(100x100x100mm)
3
-
-
(160x160x160mm)
3
-
-
Single TEE without Door
-
-
-
(75x75x75mm)
3
-
-
(100x100x100mm)
3
-
-
(160x160x160mm)
3
-
-
Bend 87.5°
-
-
-
75mm dia pipes
8
-
-
100mm dia pipes
11
-
-
150mm dia pipes
3
-
-
Bend 45°
-
-
-
75mm dia pipes
8
-
-
100mm dia pipes
11
-
-
150mm dia pipes
3
-
-
Pipe Clip
-
-
-
75mm dia pipes
10
-
-
100mm dia pipes
10
-
-
150mm dia pipes
10
-
-
Single 'Y" with door
-
-
-
75mm dia pipes
8
-
-
100mm dia pipes
11
-
-
150mm dia pipes
3
-
-
Single 'Y" without door
-
-
-
75mm dia pipes
8
-
-
100mm dia pipes
11
-
-
150mm dia pipes
3
-
-
Supplying and fixing of of 110 mm dia SWR PVC Vent Cowl including adopters and all fittings etc., complete.
6
-
-
Providing and fixing approved make & suitable model of R.O. plant 250 ltrs. Per hour flow rate having capacity to treat the raw water having TDS 1200 ppm and not less than 40%. The treated water should have TDS less than 100 ppm and hardness less than 50 ppm. The operating voltage to 230 volt AC +/- 10% alongwith required capacity pump and solenoid valves, dry run protection of pump,automatic tank level control, inbuilt auto flush timer for periodic flushing of membranes, hydro pneumatic tank, over voltage and over current protection with switch mode power supply system complete in all respects.,
-
-
-
10 micron polypropylene sediment pre filter
-
-
-
10 micron bacteriostatic activated carbon block on line micron filter with 5.1 micron rating
-
-
-
3 each of reverse osmosis memberane with 0.0001 micron pore size energy saving poly amide type
-
-
-
UV lamp of minimum capacity 25 LPM and minimum lamp wattage 9W
1
-
-
Providing and constructing bore well of 165mm dia & 150Rm depth including providing and fixing PVC casing pipes of approved quality 165mm internal dia including accessories, labour tools and required equipment etc.,complete.
-
-
-
Identifying the point for drilling the bore well
1
-
-
Drilling of 165mm dia average pilot bore by mud slush direct rotary ring in all sorts of soil of as per IS-2800 suitable for 165mm dia bore PVC pipes including carting of rig and other equipments at site etc. complete
150
-
-
Bore well casing pipe
-
-
-
Providing fixing 160mm dia PVC casing pipes Confirming to IS in bore well to a required depth etc.,complete.
150
-
-
Testing of water samples, as directed by engineers/consultant
1
-
-
Supplying and fixing heavy duty clamp of size 900mmx100mmx15mm with bolts and nuts etc.complete
1
-
-
Providing and fixing top cap of PVC Dummy suitable for 165mm dia nominal bore pipe etc. complete
2
-
-
Design, supply and installation of 3HP submersible pumpsets of 3 phase electric motor frame with coupling guard and it's fastners, and pumping water from borewell including providing, laying jointing 65mm dia GIpipe"C" class confirmed as per relevant IS code pump shall be installed at a depth of 65m from ground level and delivery pipe shall be left 1.50m above ground level. Rate to include cost of pumpsets, GI pipes with in the borewell, 3 core x 4sqmm electric cable, star delta starter, single phase preventer, dry running preventer,outer door type electrical panel board, start & stop bush button, voltmeter Amper meter,etc., provision for the maintenance of the pumps, chain block with pulley etc complete. The supplier shall give one year guarantee, complete as specified and directed by Engineers's/consultant. (Submersible Pump set in tube well)
1
-
-
Design, supplying, Installation, commissioning and testing of 10HP submersible pumpsets with 3 phase electric motor (1450 Rpm) for pumping of sewage Containing solids of maximum size 50mm with 100mm dia GI "C"class Pipe from pump to NRV approximately 5m,suitable size electrical cable, starter, single phase preventer, overhead and reverse rotation protection device, oil seal failure, indication sensor, automatic control for on / off switch and outdoor type panel board for housing the starter etc., complete (Submersible Pumpset in Sump)
1
-
-
Providing & fixing UPVC pipes and all kind of fittings as per IS 14333, PE 80 & PN6, accessories, complete as per specification and directed by ingineer incharge.
-
-
-
150 mm diameter
148
-
-
200 mm diameter
13
-
-
ELECTRICAL WORKS
-
-
-
WIRING
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group C
354
-
-
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
9
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
866
-
-
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
4384
-
-
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
1194
-
-
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
348
-
-
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
100
-
-
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
2 Pair
1218
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20 mm.
1218
-
-
25 mm.
121
-
-
32 mm.
154
-
-
40 mm
43
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
15/16 A switch
82
-
-
3 pin 5/6 A socket outlet
2
-
-
6 pin 15/16 A socket outlet
82
-
-
Telephone socket outlet
26
-
-
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
3
-
-
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
-
-
-
1 or 2 Module (75 mmX75 mm)
115
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
73
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
33
-
-
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
3
-
-
Supplying and fixing brass batten/ angle holder including connections etc. as required.
-
-
-
Installation, testing and commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/ LED lamps per fitting, complete with all accessories including connections etc. as required.
87
-
-
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
-
-
-
Upto 450 mm sweep
20
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlet and 2 Nos. 5/ 6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).
26
-
-
Supplying and fixing PVC batten/ angle holder including connections etc. as required.
21
-
-
MCCB, MCB & DB’S
-
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single Pole
388
-
-
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
25 A
11
-
-
Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A, 240 V “C” curve DP MCB complete with connections, testing and commissioning etc. as required.
2
-
-
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
11
-
-
Supplying and fixing Cable End Box (Loose wire box)(IP 43) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with testing and commissioning etc. as required.
-
-
-
For 6 way, Double door SPN MCBDB
1
-
-
For 14 way, Double door SPN MCBDB
1
-
-
CABLE TRAYS
-
-
-
Supplying and installing following size of perforated painted with powder coating M.S cable tray with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S suspenders including bolts & nuts, Painting suspenders etc. as required.
-
-
-
100 mm width X 50 mm depth X 1.6 mm thickness
150
-
-
225 mm width X 50 mm depth X 1.6 mm thickness
60
-
-
300 mm width X 50 mm depth X 1.6 mm thickness
45
-
-
450 mm width X 50 mm depth X 1.6 mm thickness
164
-
-
Supplying and installing following size of perforated painted with powder coating M.S cable trays bends with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S suspenders including bolts & nuts, Painting suspenders etc. as required.
-
-
-
100 mm width X 50 mm depth X 1.6 mm thickness
9
-
-
Supplying and installing following size of perforated painted with powder coating M.S cable trays Tee with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S suspenders including bolts & nuts, Painting suspenders etc. as required.
-
-
-
225 mm width X 50 mm depth X 1.6 mm thickness
6
-
-
300 mm width X 50 mm depth X 1.6 mm thickness
3
-
-
450 mm width X 50 mm depth X 1.6 mm thickness
6
-
-
Supplying and installing following size of perforated painted with powder coating M.S cable trays Reducer with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S suspenders including bolts & nuts, Painting suspenders etc. as required.
-
-
-
100 mm width X 50 mm depth X 1.6 mm thickness
9
-
-
225 mm width X 50 mm depth X 1.6 mm thickness
9
-
-
300 mm width X 50 mm depth X 1.6 mm thickness
6
-
-
450 mm width X 50 mm depth X 1.6 mm thickness
9
-
-
EARTHING
-
-
-
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required..
18
-
-
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
4
-
-
Providing and fixing 25 mm X 5 mm Copper. strip on surface or in recess for connections etc. as required.
20
-
-
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
350
-
-
Providing and fixing 6 SWG G.I. wire on surface or in recess for loop earthing as required.
1745
-
-
LIGHTNING CONDUCTOR
-
-
-
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
2
-
-
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required.(For horizontal run)
290
-
-
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required. (For vertical run)
60
-
-
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 Nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
2
-
-
MV CABLE LAYING
-
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refiling the trench etc. as required.
-
-
-
Upto 35 sq. mm
1177
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC /HUME /METAL pipe as required.
-
-
-
Upto 35 sq. mm
390
-
-
Above 95 sq. mm and upto 185 sq. mm
840
-
-
Above 185 sq. mm and upto 400 sq. mm
2400
-
-
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on cable tray as required.
-
-
-
Upto 35 sq. mm (Clamped with 25×3mm MS flat clamp)
85
-
-
Above 35 sq. mm and upto 95 sq. mm (Clamped with 25×3mm MS flat clamp)
4820
-
-
MV CABLE END TERMINATION
-
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
-
-
-
3½ X 70 sq. mm (38mm)
48
-
-
3½ X 95 sq. mm (45mm)
2
-
-
3½ X 150 sq. mm (50mm)
2
-
-
3½ X 185 sq. mm (57mm)
4
-
-
3½ X 240 sq. mm (62mm)
16
-
-
3½ X 400 sq. mm (82mm)
8
-
-
4 X 16 sq. mm (28mm)
12
-
-
MISC. CIVIL ITEMS
-
-
-
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc. as required.
-
-
-
100 mm Dia
15
-
-
300 mm dia
625
-
-
FITTINGS
-
-
-
Supplying of 10W LED Wall mounted light with all accessories Ref: Philips Catalogue No.33094 / QWG 325 (or) Equivalent
21
-
-
Supplying of 19W LED fittings with all accessories for ceiling and wall mounted Ref: Philips Catalogue No. BN108C LED20S CDL WH (or) Equivalent
4
-
-
Supplying of 18W TLED fittings with all accessories for ceiling and wall mounted Ref: Philips Catalogue No. TMC501 /1 x T-LED 18W (or) Equivalent
37
-
-
Supply of fixing of Down Light 18 Watts LED Fittings,similar to Philips Make DN195B LED20S-6500 PSU WHS1.
3
-
-
Supply of fixing of Flood Light 35 Watts LED Fittings,similar to Philips Make BVP120 LED 35 CW FG S1 PSUGR.
2
-
-
Supply of fixing of 24w Pedestal (Gate) Light Fittings with 14 Watts LED Fittings,similar to Philips Make 15332/54.
2
-
-
Supplying of 12W LED Down light surface mounted Fitting with all accessories. Ref: Philips Catalogue No. SM260C LED 12S 6500 PSU 12.1W (or) Equivalent
13
-
-
Supplying of 6W LED Bulkhead light Fittings with all accessories Ref : Philips catalogue No. WT202W LED6S NW PSU S2 PC (or) Equivalent
23
-
-
CEILING FAN
-
-
-
Supply and fixing of 1200 mm (48") sweep ISI Mark Ceiling Fan as per IS 374 -1979 and 230V, A.C 50 Hz.Ceiling fan with 3 Blades and double ball bearing and low power consumption fan with all standard accessories.
3
-
-
EXHAUST FAN
-
-
-
Supply of 300mm dia wall mounted fan as per standard specification and as directed by Engineer - in - charge.
20
-
-
MCB
-
-
-
Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40A 4P
31
-
-
RCBO
-
-
-
Supplying and fixing of following rating, 240/415 volts,Residual Circuit Breaker with overload protection (RCBO) following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40A 100mA Double Pole
84
-
-
DISTRIBUTION BOARDS
-
-
-
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, 7 Segment distribution Board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required
-
-
-
4 Way
31
-
-
MV CABLES SUPPLY
-
-
-
Supply of PVC / XLPE insulated armoured cables with aluminium conductors for working voltages up to and including 1100V confirming to IS 1554 part I 1988 for PVC and IS 7098 Part I for XLPE.
-
-
-
3½ C X 70 sq. mm Al.Ar.XLPE UG Cable
4820
-
-
3½ C X 95 sq. mm Al.Ar.XLPE UG Cable
290
-
-
3½ C X 150 sq. mm Al.Ar.XLPE UG Cable
220
-
-
3½ C X 185 sq. mm Al.Ar.XLPE UG Cable
330
-
-
3½ C X 240 sq. mm Al.Ar.XLPE UG Cable
2240
-
-
3½ C X 400 sq. mm Al.Ar.XLPE UG Cable
160
-
-
4C X 16 sq. mm Al.Ar.XLPE UG Cable
475
-
-
4C X 6 sq. mm Al.Ar.XLPE UG Cable
426
-
-
3C X 2.5 sq. mm Cu.Ar.XLPE Cable
751
-
-
MV CABLE END TERMINATION
-
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
-
-
-
4C X 6 sq. mm Al.Ar.XLPE UG Cable
28
-
-
3C X 2.5 sq. mm Cu.Ar.XLPE Cable
40
-
-
PANELS
-
-
-
Factroty Hall PSB
Supply and erection of powder coated wall mounting Factory Hall PSB panel made of 1.6mm thick CRCA sheet steel dust and vermin proof encloser with suitable size of aluminium bus bar rating 0.7 amps per Sq.mm for main and interconnecting switchgear, Electronic digital meter for measuring KWh with indication lamp and earthing as per requirement of CEIG and IE regulation. For the provision of following rated switchgear in the panel.
Incoming :
i) 100A 4P MCCB 25kA with suitable rotary handle - 1 No.
ii) Multifunction Meter with suitable CT's - 1 Set.
iii) RYB LED Indicating lamp with Control fuse - 1 Set.
Outgoing :
i) 63A TP+N MCCB with Suitable Rotary Handle - 3 Nos.
ii) 40A TP+N MCCB with Suitable Rotary Handle - 3 Nos.
24
-
-
LIFT PANEL Supply and erection of powder coated wall mounting Factory Hall PSB panel made of 1.6mm thick CRCA sheet steel dust and vermin proof encloser with suitable size of aluminium bus bar rating 0.7 amps per Sq.mm for main and interconnecting switchgear, Electronic digital meter for measuring KWh with indication lamp and earthing as per requirement of CEIG and IE regulation. For the provision of following rated switchgear in the panel.
Incoming :
i) 125A 4P MCCB 25kA with suitable rotary handle - 1 No.
ii) Multifunction Meter with suitable CT's - 1 Set.
iii) RYB LED Indicating lamp with Control fuse - 1 Set.
Outgoing :
iv) 63A TP+N MCCB with Suitable Rotary Handle - 6 Nos.
1
-
-
NETWORK SOCKET
Supplying and fixing of CAT-6 Network socket in the exisitng suitable size/ modules, GI box along with modular base & cover plate and as per the direction of engineer incharge.(Make: Legrand or Equivalent.)
2
-
-
Telephone Crone Box
-
-
-
Supply, Installation, testing and Commissioning of 10 pair crone connector with G.I box including all accessories. As per the manufacturer specification and as per the direction of engineer incharge.
1
-
-
Supply, Installation, testing and Commissioning of 20 pair crone connector with G.I box including all accessories. As per the manufacturer specification and as per the direction of engineer incharge.
1
-
-
UPS
-
-
-
Supplying and fixing of 2 KVA, SW HR UPS system (1P-1P) 12 V -DC Battery back up using ( 12V X 150 AH X 2 No) for 1 Hour back up along with necessary MS Rack for batteries and interconnecting cable.
2
-
-
SAFETY EQUIPMENTS
supply and delivery of the following safety equipments with allied material as required.
a) 10 kg capacity DCP type fire extinguisher -2 Nos c) First aid box small size -1 Set
d) first aid resuscitation chart laminated both in local language and English -1 Set
2
-
-
EXTERNAL ELECTRICAL
-
-
-
PANEL BOARDS
-
-
-
10W Metering Panel Supply and erection of powder coated floor mounting Metering panel made of 1.6mm thick CRCA sheet steel dust and vermin proof encloser with suitable size of aluminium bus bar rating 0.7 amps per Sq.mm for main and interconnecting switchgear, Electronic digital meter for measuring KWh with indication lamp and earthing as per requirement of CEIG and IE regulation. For the provision of following rated switchgear in the panel.
Incoming :
i) 400A 4P MCCB 36kA with suitable rotary handle - 1 No.
ii) Multifunction Meter with suitable CT's - 1 Set.
iii) RYB LED Indicating lamp with Control fuse - 1 Set.
Outgoing :
i) 10-60A 3Ph 4W LCD Display TVM Meter with RS485 -8 Nos.
ii) 100A TPN 500V Procelain Fuse with Base -10 Nos.
iii) 100A TP+N MCCB 25kA with suitable rotary handle -10 Nos.
2
-
-
8W Metering Panel Supply and erection of powder coated floor mounting Metering panel made of 1.6mm thick CRCA sheet steel dust and vermin proof encloser with suitable size of aluminium bus bar rating 0.7 amps per Sq.mm for main and interconnecting switchgear, Electronic digital meter for measuring KWh with indication lamp and earthing as per requirement of CEIG and IE regulation. For the provision of following rated switchgear in the panel.
Incoming :
i) 250A 4P MCCB 25kA with suitable rotary handle - 1 No.
ii) Multifunction Meter with suitable CT's - 1 Set.
iii) RYB LED Indicating lamp with Control fuse - 1 Set.
Outgoing :
i) 10-60A 3Ph 4W LCD Display TVM Meter with RS485 -8 Nos.
ii) 100A TPN 500V Procelain Fuse with Base -8 Nos.
iii) 100A TP+N MCCB 25kA with suitable rotary handle - 8 Nos.
1
-
-
STREET LIGHT CONTROL DB
Supply ,erection , testing and commissioning of outdoor type Street light Distribution feeder pillar with 14 SWG CRCA plain black sheet steel enclosure to accommodate 4 way TPN MCB DB for street light power distribution and one no of 24 hrs timer with 40A power contactor for automatic ON/OFF of street light. For the provision of following rated switchgear in the panel.
i) 40A 4P MCCB 16KA - 1No
ii)16A FP MCB - 6Nos
1
-
-
PSB 1 (Existing Panel additional work) : Supply and erection of interconnecting switchgear, Electronic digital meter for measuring KWh with indication lamp and earthing as per requirement of CEIG and IE regulation. For the provision of following rated switchgear in the panel.
Incoming :
i) 400A 4P MCCB 36kA with suitable rotary handle - 1 No.
ii) Supply and Fixing of KSEB Metering Assembling Set in Existing Sub main Panel for Supply to common Area Along with 200A CT coil for operating trivector KWH Meter -3 Nos iii) RYB LED Indicating lamp with Control fuse - 1 Set.
iv) 200A 3Ph 4W LCD Display TVM Meter with RS485 -1 Nos.
v) 500A TPN 500V Procelain Fuse with Base -3Nos. vi) 250A 4P MCCB 25kA with suitable rotary handle - 2 Nos
1
-
-
Existing MV Panel Additional work : i) Outgoing feeders will be provided with 1 No. Flush type digital 96 sq.mm size Digital meter with RS485 Port (V/A/PF/KW/KWH), R,Y,B, and indication lamps necessary CT’s and control fuse carrier etc.-1 Sets.
ii) 400A 4P MCCB with Rotary handles and all its accessories and interconnecting bus bars 0.7 amps Density to main Bus bar - 1No
1
-
-
125 kVA DG set with Control Panel-AMF Logic
Supply erection testing and commissioning of 125kVA DG set Packaged with Engine, alternator, acoustic enclosure, inbuilt fuel tank, battery with standard manual control panel with AMF Logic speciality shall be earth fault protection as per CEIG regulation and IS specification. Supply and erection of 200A 4P MCCB - 1 No.1set of Multidata meter and three Phase Indication lamps, The busbar rating shall be of 200A rating aluminium bus bar.(refer Technical specification) Necessary battery for 125kVA DG set shall be included .
1
-
-
OUTDOOR LIGHT
-
-
-
Supply and Fixing of 4W LED Bollard Light with all associers similar to Philips Make Cat No : BCP150 LED150/WW PSU 220-240V 7043 or Equlant
19
-
-
Supply and fixing of Green line Range 36W LED Street Light Outdoor type with high efficiency Lumen and dust Resistants Protection (IP 65) Class I type(Make: Philips BRP 409 LED CW 036 MR FG S1 PSU GR or Equivalent)
16
-
-
Supply,delivery & installation of 7m long octogonal GI Pole made out of 3mm thick galvenised sheets (both inner and outer surface being galvanised) with single arm of 1.5m length, 8 degree tilt.with botton dia of 150mm, top dia of 76mm similar to bajaj type BOP-7030 or equivalent with a foundation base plate of size 240x240x20mm and 4nos. 20mm dia anchor bolts duly embedded in 1:2:4 P.C.C including excavation of pit,concreting providing PVC pipes of cable entry, providing junction box with 6amp SP MCB loop in loop out arrangement termal block wiring with 3core 1.5sq.mm PVC insulated copper wire from junction box upto the fitting and with a bracket of 1500 mm as required as per direction of Engineer in charge.
12
-
-
Supply,delivery & installation of 7m octagonal GI Pole made out of 3mm thick galvenised sheets (both inner and outer surface being galvanised)with double arm of 1.5m length, 8 degree tilt.with botton dia of 150mm, top dia of 76mm similar to bajaj type BOP-7030 or equivalent with a foundation base plate of size 240x240x20mm and 4nos. 20mm dia anchor bolts duly embedded in 1:2:4 P.C.C including excavation of pit,concreting providing PVC pipes of cable entry, providing junction box with 6amp SP MCB loop in loop out arrangement termal block wiring with 3core 1.5sq.mm PVC insulated copper wire from junction box upto the fitting and with a bracket of 1500 mm as required as per direction of Engineer in charge.
2
-
-
APPROVAL
Preparing and obtaining the approval from CEIG to carryout electrical installation and duly submitting the drawing for approval including necessary inspection fees for inspection and obtaining Safety certificate for entire new installation
1
-
-
Firefighting Works
-
-
-
Supplying, fixing and testing CI sluice valves conforming to IS 780 including making of necessary screwed joint/ flanged joint and also including cost of jointing materials etc., complete as required as per PN 1.6 tested upto 24kg/cm2 pressure.
-
-
-
a) 100mm dia
15
-
-
b)150mm dia
2
-
-
Providing and fixing in position GM gate valve with C.l. wheel of approved quality (screwed end} nominal bore including cost of all materials, labour and HOM of equipments with all· leads complete as per specifications.
-
-
-
25mm
9
-
-
65mm
9
-
-
Providing and fixing in. position nominal bore gun metal non-return valve Horizontal type of approved make including cost of all materials, labour and HOM of equipments with all leads complete as per specifications.
-
-
-
100mm
5
-
-
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
-
-
-
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
4
-
-
Supply installing, testing and commissioning of COMMON control panel for firefighting system consisting of Diesel electrical motor driven 116.5 HP Main fire pump, Jockey pump and 12.5 HP consisting of the following:
INCOMING:
1 No. Set of phase indicluding lamps with ACB Rate 2500 amps
1 No. Set of 2500 Amps. TPN AL. Bus bars
1 No. 0-1600 fJ ,mps. Ammeter, 1•No. 0-600V voltmeter with phase selector switch, lsolating Switch 2500 Amps
-
-
-
OUTGOING for Main Electric Pump:
-
-
-
2 No. 1600 Amps ACB
-
-
-
2 No. star delta starter suitable for 185HP
-
-
-
2 No. Single phase preventer suitable for the pump described above ·-- ·
-
-
-
2 NO. set of ON/OFF indicating lamps.
-
-
-
2 No. Auto/manual selector switch
-
-
-
OUTGOING for Jockey Pump 12.5HP
-
-
-
Remote starting controlling through pressure switch
-
-
-
1 No. 63 amps MCCB
-
-
-
1 No. star delta starter suitable for 12.50 HP
-
-
-
1 No. Single phase preventer suitable for the pump described above
-
-
-
1 No. set of ON/OFF indicating lamps
-
-
-
1 No. Auto/manual selector switch
-
-
-
ENGINE CONTROL SECTION N0.1
-
-
-
Diesel Engine for Standby pump :
-
-
-
a) Main switch 2 pole ON/OFF - 1 No.
-
-
-
b) Battery charger with transformer with rectifier resistance DC ammeter,
-
-
-
DC voltmeter, T/B selection switch - 1 set
-
-
-
c) Indicating lamps for fault communication ( Battery charger, supply ON,
-
-
-
Control ON, engine running, low oil pressure, high water pressure and --.
-
-
-
engine over speed) - 6 Nos.
-
-
-
d) Push buttons for starter, stop reset - 4 Nos.
-
-
-
e) Selector switches (Engine control, mode selector)- 2 Nos.
-
-
-
f) Auxilary rellays/contractors/timer for sequence operating for starting and stopping of the engine - 1
-
-
-
g) Hooter for audio alarm (Industrial type) -1 No. Accessories for outgoing
-
-
-
i) Remote starting controlling through pressure switch
-
-
-
supply for the motors :
-
-
-
Gl SWD earthing wire for the above motor
-
-
-
Accessories for outgoing supply for Diesel Engine :
-
-
-
Copper conductors armoured cable 2.5 sqmm of 12 Core x 2 runs
-
-
-
a) Battery 2 strands
-
-
-
b) Engine ON/OFF 2 strands
-
-
-
c) Low oil pressure 3 strands
-
-
-
d) Engine over speed 2 strands
-
-
-
e) Water temperature 2 strands
-
-
-
f) Spare 1 strand
-
-
-
The cost of control panel shall also include necessary pressure switches with necessary cabling & inter-locked with the panel to enable sequential operation of Pumps, Including terrace mortar necessary earthling. All the components shall be housed in a common cubical.
1
-
-
Supply, installation testing and commissioning of approved make heavy duty (Class 'C') GI Pipes and fittings confirming to as per is 1239 such as Tees elbows check nuts Unions, Flanger, Nipples etc., including cutting welding, Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S. angle supports work includes two coats of metal primer and two coats of Red enamel paint etc.)
-
-
-
b) 150mm dia
238
-
-
c) 100mm dia
55
-
-
f) 50 mm dia
360
-
-
g) 40mm dia
225
-
-
h)32mm dia
255
-
-
i) 25mm dia
105
-
-
Providing and fixing blank flanges as per table 'E" with asbestos gasket, nut, bolts, washers complete
-
-
-
a)65mm dia
3
-
-
b)80mm dia
3
-
-
c) 100mm dia
3
-
-
SITC of 63mm dia single headed Gun metal Hydrant value with black cap and wheet as per IS 5290 etc., complete Make: WINCO / NEW Age.
16
-
-
SITC of Hose cabinet made out of 18 gauge M.S. Sheet with double glass door with locking arrangement and painted with two coats of Fire red Enamel paint at outer side of the box and two coats of white enamel paint at inner side of the box is to accommodate 2 nos. of Fire hose. box size 800 x 600 x 250
9
-
-
Providing and fixing two way fire service inlet to the 100mm dia GI 'C' class pipe wet riser to be house in MS bolt with glass cover for front side.etc. complete.
2
-
-
SITC of Gun metal Branch pipe size of 63mm dia x 19mm dia as per IS 903 Make: WINCO/NEWAGE
9
-
-
Fire Alarm System
-
-
-
SITC of 2x1.5 Sq.mm copper armoured cable with fixture etc., .
9
-
-
SITC of electronic Hooter, it consists of electronic circuit to give dual Fire alarm sound with works 24V DC with speaker all enclosed in suitable in MS. 16 gauge red painted box.
9
-
-
Providing and laying 25mm dia M.S. 16 gauge conduit pipes and fittings for fire alarm system, including necessary all accessories etc. complete.
18
-
-
Fire Extinguishers
-
-
-
Providing 6Kg Fire Extinguisher Mono Ammonium Phoshate Powder 50, Stored Pressure Type, Pressure Gauge, Gross weight 9.5 Kg, empty weight 3.5 Kg, Can Height 435MM, Diameter 160MM, Discharge Time less than 9 Sees, Controllable discharge mechanism, Range minimum 4 meters, applicable on Class A,B,C and electrically started Fire, A Rating 21A, B Rating 898, Can construction: Deep drawn & Co., Mig welded, valve construction : Forging and Machining, Internal Coating of Can ; Epoxy powder coating, External Coating of Can : Epoxy Polyster power coating, sheet metal thickness: 1.60MM, Helium Leak Detection Tested, lSI and EN Approved, 5 years warranty.
15
-
-
Providing 4.5 Kg C02 Gas Type Fire Extinguisher, Trolley Mounted, Easy Weight Management used Unused Mechanism, Squeeze Grip, Gross weight 19.1 Kg, empty Weight 14.6 Kg, Can Height 857MM Diameter 140MM, Discharge Time Less than 10 Secs, Controllable discharge· ( ' mechanism, Applicable on Class B&C Fire, B Rating 218, Can Constrution :Hot spinning/Forging, Value Construction: Forging & Machining, Internal Coating of Can : Not Apllicable, External Coating of Can : Spray Painting, Sheet metal thickness : 4.5 MM lSI Approved, 1 Year Warranty.
3
-
-
Fire Buckets and Stand
-
-
-
Supplying of four bucket stand along with buckets.
3
-
-
Fire Hose
-
-
-
SITC of RRL fire hose of 63 mm dia 15m length as per IS 84.23 binded with one set of male and female instantanious gun metal coupling as per IS 903 WINCO/NEW AGE
9
-
-
Hose Reel
-
-
-
SITC of Hose reel cane M.S. Pressed reel of 600mm dia and swing upto 170 -degree with "L" shape carrier
9
-
-
SITC of 19mm dia with wire binded Nylon hose. length of 36.5 mtrs.
9
-
-
SITC of Manual Call point: It consists of Micro push button switch with LED and circutary etc., works on 24V DC LED indicator with glass Fronted, Aiso with hammer foi breaking the glass incase of Fire. Accomodated in 75x75x30mm size M.S. 16 gauge red enamel painted box. make : to suit main control panel
9
-
-
SITC of Gun metal AIR RELEASE VALVE SIZE OF 25mm dia
3
-
-
SITC of approved make 15mm dia sprinkler bulb pendent /Upight/ wall mounted type designed to operate 68 degree centegrade . Make Tyco/HD FIRE
396
-
-
Supply, installation, testing and commissioning of intelligent addressable fire alarm system extended to the ward with the following items. As per the manufacturer specification and as per the direction of engineer-in-charge.
-
-
-
c) Single Loop Analog adressable fire alarm control panel.
1
-
-
SITC OF Smoke/Heat detector Photo electric type detector with base LED indicator on smoke detector fixed cum rise temperature type heat detector with base Make Applow/System Sensor
87
-
-
Designing, providing and fixing Orifice plate made out of stainless steel plate (thickness as per specification) for following size of pipe to reduce pressure upto 3.5 Kg/sqcm complete in all respects.
-
-
-
c) 100mm dia
1
-
-
Landscape works: Providing and planting Korean grass lawn planting work including grass, land preparation, planting labour charges, pre and post pesticide apply and maintaning the lawm for 3 months.
3000
-
-
Providing and planting border plants including land preparation, planting labour charges, pre and post pesticide apply and maintaning the lawm for 3 months.
372
-
-
Providing and planting foliage ornamental shrubs including land preparation, planting labour charges, pre and post pesticide apply and maintaning the lawm for 3 months.
51
-
-
Providing and planting flowering ornamental shrubs including land preparation, planting labour charges, pre and post pesticide apply and maintaning the lawm for 3 months.
7
-
-
Providing and planting palm trees including land preparation, planting labour charges etc.,
-
-
-
Areca palms 6ft height
19
-
-
Roystenia regia 8ft Height
19
-
-
Providing and planting Foliage trees 8ft height including land preparation, planting labour charges etc.,
4
-
-
Providing and planting Flowering trees 8ft height including land preparation, planting labour charges etc.,
15
-
-
INPUTS
-
-
-
Supplying and filling WIth Red Soil including levelling, watering, etc., complete.
600
-
-
Supplying and filling WIth River Sand including levelling, watering, etc., complete.
18
-
-
Supplying and filling WIth Manure including levelling, watering, etc., complete.
18
-
-
Passenger Lift: Supplying, erecting ,Commissioning of 13 persons Machine Room less (884-1050 Kgs-1 m/sec) Passanger lift at the site. The Size of Lift Well (2300± 200X2300 ± 200 mm) Lift Car Inside Size (1550± 100x1400± 100x2200± 100 mm )with Stainless steel -Hairline finish for Lift & Car ceiling and floor. The type of the car entrance and Landing entrance production is power operated centre opening sliding door with stainless steel ( hairline finish).The type of Landing door frame is Stainless Steel(hairline finish).The clear opening of door is 900mmX2100mm.The control system are Microprocessor based simplex selective collective control with /without attendent of AC 400/440 VOLTS, 3 PHASE, 50 CYCLES of Elecrical supply with Necessary fiitings, Labour, annual maintanance ,etc to complete.
1
-
-
Goods Lift: Supplying & Erecting ,Commission at the site Goods lift(G+2) (2000 Kgs ). Lift Car Inside Size (2400 mm W X 2300 mm D X 2100 mm H )Made out of M.S. Square tubes, sides covered with M.S. panels, bottom covered M.S. Chequered plate, ceiling M.S. panels. its operated by Push Button Pendent & required Power supply is 415 V 3 Phase AC with neutral and earthing to be provided & the lifting speed is 6 to 8 Mtrs. /Min. The rollers are Made out of EN 8 Steel and fitted with double ball bearings.The Vertical Columns Made out of Formed Channels.The Hydraulic Cylinder Made out of imported honed tubes and fitted with grounded hard chrome plated shaft & Polyurethane Seals.All the Gates will be fitted with safety switches and mechanical inter locking arrangement to ensure that all the gates are closed before operating the lift with Necessary fiitings ,labour ,transport,tax etc to complete.
1
-
-
Dock leveler: Supply & fixing a 6ton capacity of dock leveler .the top plat form size of the dock leveler is 2500mm x 2200mm±200mm. Maximum top level adjustment with respect to factory floor level is +350mm.total swing is 60mm&closed height in home position is 600mm.The electro hydraulically operated lip size is 2200 length x 400 mm width x 12mm thick .The Lip type is single. The equipment will be supplied with hinged type lip .the lip can swing 900.the lip pin will be of stainless steel . The lip is supported by hinges throughout its length for rigidity and strength .Heavy duty top platform is covered by 5mm thick MS chequred plate, supported by rectangular tubular sections for ruggedness and rigidity .the rate including all necessary fittings, labour, tax, transport, etc to complete
1
-
-
CANTEEN BUILDING
-
-
-
EARTH WORK: Carriage of material by mechanical transport including loading, unloading and stacking
-
-
-
Earth
-
-
-
Up to 1 km.
28
-
-
1 to 2 km.
20
-
-
2 to 3 km.
20
-
-
3 to 4 km.
20
-
-
4 to 5 km.
20
-
-
Excavated rock
-
-
-
Up to 1 km.
151
-
-
1 to 2 km.
101
-
-
2 to 3 km.
71
-
-
3 to 4 km.
40
-
-
4 to 5 km.
40
-
-
Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m :
-
-
-
All kinds of soil
100
-
-
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
-
-
-
All kinds of soil
77
-
-
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.
-
-
-
Ordinary rock
20
-
-
Hard rock (requiring blasting)
20
-
-
Hard rock (blasting prohibited)
20
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m inwidth or 10 sqm on plan),including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil anddisposal of surplus excavated soil as directed, within a ead of 50 m.
-
-
-
All kinds of soil
558
-
-
Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.
-
-
-
Ordinary rock
319
-
-
Hard rock (requiring blasting)
10
-
-
Hard rock (blasting prohibited)
10
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
683
-
-
Excavating, supplying and filling of local earth (includingroyalty) by mechanical transport up to a lead of 5km, alsoincluding ramming and watering of the earth in layers notexceeding 20 cm in trenches, plinth, sides of foundation etc.complete
296
-
-
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
-
-
-
All kinds of soil
10
-
-
Ordinary or hard rock
319
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
11
-
-
Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.
-
-
-
All kinds of soil
2059
-
-
Supplying chemical emulsion in sealed containers including delivery as specified.
-
-
-
2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
900
-
-
CONCRETE WORK: Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size).
44
-
-
1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
41
-
-
1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size).
10
-
-
Providing and laying cement concrete in retaining walls, return walls,walls (any thickness) including attached pilasters, columns, piers,abutments, pillars, posts, struts buttresses, string or lacing courses,parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor,etc., up to floor five level, excluding the cost of centering,shuttering and finishing :
-
-
-
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
6
-
-
Centering and shuttering including strutting, propping etc. and removal of form work for :
-
-
-
Foundations, footings, bases for columns
68
-
-
Columns, piers, abutments, pillars, posts and struts
62
-
-
REINFORCED CEMENT CONCRETE
-
-
-
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete
117
-
-
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
10
-
-
Suspended floors, roofs, landings, balconies and access platform
898
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers
312
-
-
Columns, Pillars, Piers, Abutments, Posts and Struts
668
-
-
Stairs, (excluding landings) except spiral-staircases
57
-
-
Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards
10
-
-
Extra for shuttering in circular work (20% of respective centering and shuttering items)
53
-
-
Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like
20
-
-
Edges of slabs and breaks in floors and walls
-
-
-
Under 20 cm wide
315
-
-
Above 20 cm wide
57
-
-
Weather shade, Chajjas, corbels etc., including edges
49
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick
568
-
-
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).
-
-
-
Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
947
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more
16912
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500 D or more.
39495
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering,shuttering,finishing and reinforcement,includingadmixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note:-Cement contentconsidered in this item is @ 330 kg/cum.“Excess/ less cement usedas per design mix is payable/recoverable separately).
-
-
-
All works upto plinth level
113
-
-
All works above plinth level upto floor V level
263
-
-
Add for using extra cement in the items of design mix over and above the specified cement content therein.
5
-
-
BRICK WORK: Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
253
-
-
STONE WORK: Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :
-
-
-
Cement mortar 1:6 (1 cement : 6 coarse sand)
10
-
-
MARBLE & GRANITE WORK: Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanitycounters, window sills, facias andsimilar locations of required size,approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
-
-
-
Granite of any colour and shade
-
-
-
Area of slab upto 0.50 sqm
1
-
-
Area of slab over 0.50 sqm
25
-
-
Providing edge moulding to 18 mm thick marble stone counters, Vanitiesetc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
-
-
-
Granite work
42
-
-
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
42
-
-
Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
9
-
-
Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.
26
-
-
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
-
-
-
Granite Stone of approved shade
5
-
-
WOOD & PVC WORK: Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).
-
-
-
Sal wood
1
-
-
Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction withframe of 1st class hard wood andwell matched commercial 3 plyveneering with vertical grains or cross bands and face veneers on bothfaces of shutters:
-
-
-
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
29
-
-
Extra for providing lipping with 2nd class teak wood battens 25 mmminimum depth on all edges of flush door shutters (over all area of doorshutter to be measured).
29
-
-
Extra for providing vision panel not exceeding 0.1 sqm in all type of flushdoors (cost of glass excluded) (overall area of door shutter to bemeasured):
-
-
-
Rectangular or square.
29
-
-
Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).
29
-
-
Providing and fixing wooden moulded beading to door and window frameswith iron screws, plugs and priming coat on unexposed surface etc. complete :
-
-
-
2nd class teak wood
-
-
-
50 x 20 mm
77
-
-
Providing and fixing M.S. grills of required pattern in frames of windowsetc. with M.S. flats, square or round bars etc. including priming coatwith approved steel primer all complete.
-
-
-
Fixed to openings /wooden frames with rawl plugs screws etc.
1390
-
-
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
139
-
-
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :
-
-
-
100X58X1.90 mm
139
-
-
Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:
-
-
-
125x75x4 mm
6
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868 ) transparent or dyedto required colour or shade, with necessary screws etc. complete :
-
-
-
300x10 mm
2
-
-
Providing and fixing aluminium handles, ISI marked, anodised (anodiccoating not less than gradeAC 10 as per IS : 1868) transparent or dyedto required colour or shade, with necessary screws etc. complete :
-
-
-
125mm
2
-
-
Providing and fixing aluminium hanging floor door stopper, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to requiredcolour and shade, with necessary screwsetc. complete.
-
-
-
Twin rubber stopper
1
-
-
Providing and fixing bright finished brass 100 mm mortice latch andlock, ISI marked, with six levers and a pair of anodised (anodic coatingnot less than grade AC 10 as per IS :1868) aluminium lever handles ofapproved quality with necessary screws etc. complete.
1
-
-
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
66
-
-
Providing and fixing to existing door frames.
-
-
-
30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.
18
-
-
Providing and fixing bright /matt finished Stainless Steel handlesof approved quality & make with necessary screws etc allcomplete.
-
-
-
125 mm
50
-
-
100mm
22
-
-
STEEL WORK: Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.
-
-
-
80x1.25 mm M.S. laths with 1.25 mm thick top cover
16
-
-
Providing and fixing ball bearing for rolling shutters.
2
-
-
Structural steel work riveted, bolted or welded in built up sections,trusses and framed work, including cutting, hoisting, fixing in position andapplying a priming coat ofapproved steel primer all complete.
10
-
-
Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steeletc. as required.
-
-
-
In gratings, frames, guard bar, ladder, railings, brackets, gatesand similar works
113
-
-
Providing and fixing hand rail of approved size by welding etc. to steelladder railing, balcony railing, staircase railing and similar works,including applying priming coat ofapproved steel primer.
-
-
-
M.S Tube
1571
-
-
Providing and fixing carbon steel galvanised ( minimum coating 5 micron)dash fastener of 10 mm dia double threaded 6.8 grade (yield strength480 N/mm2), counter sunkhead,comprising of 10 m dia polyamide PA6 grade sleeve, including drilling of hole in frame , concrete/ masonry,etc. as per direction of Engineer-in-charge.
-
-
-
10 x 80 mm
6
-
-
10 x 120 mm
5
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishingand making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainlesssteel bolts etc., of required size, on the top of the floor or the side ofwaist slab with suitable arrangement as per approval of Engineer-incharge, (forpayment purpose only weight of stainless steel membersshall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.).
1198
-
-
FLOORING:Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate) finished with a floating coat of neat cement, includingcement slurry, but excluding thecost of nosing of steps etc. complete.
-
-
-
40 mm thick with 20 mm nominal size stone aggregate
18
-
-
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).
-
-
-
Light shade pigment using white cement
26
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
281
-
-
Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conformingto IS : 15622, of approved make, inall colours, shades, except White,Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @3.3kg/sqm including pointing the joints with white cement and matchingpigments etc., complete.
562
-
-
ROOFING: Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.
10
-
-
FINISHING
-
-
-
12 mm cement plaster of mix :
-
-
-
1:4 (1 cement: 4 fine sand)
2862
-
-
20 mm cement plaster of mix :
-
-
-
1:4 (1 cement: 4 coarse sand)
49
-
-
6 mm cement plaster of mix :
-
-
-
1:3 (1 cement : 3 fine sand)
1492
-
-
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers
7
-
-
Extra for plastering exterior walls of height more than 10 m fromground level for every additional height of 3 m or part thereof.
57
-
-
White washing with lime to give an even shade :
-
-
-
New work (three or more coats)
1471
-
-
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :
-
-
-
New work (two or more coats) over and including waterthinnable priming coat with cement primer
1193
-
-
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:
-
-
-
New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
70
-
-
Applying priming coat:
-
-
-
With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
75
-
-
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
-
-
-
Two or more coats on new work
212
-
-
Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge :
-
-
-
20 mm wide and 15 mm deep groove
252
-
-
ROAD WORK: Supplying and stacking at site.
-
-
-
Good earth
105
-
-
ALUMINIUM WORK:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
For fixed portion
-
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron)
57
-
-
For shutters of doors, windows & ventilators includingproviding and fixing hinges/ pivots and making provisionfor fixing of fittings wherever required including the costofEPDM rubber / neoprene gasket required (Fittingsshall be paid for separately)
-
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron)
47
-
-
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.
-
-
-
Pre-laminated particle board with decorative lamination on both sides
5
-
-
Providing and fixing glazing in aluminium door, window, ventilatorshutters and partitions etc. with EPDM rubber / neoprene gasketetc. complete as per the architecturaldrawings and the directionsof Engineer-in-charge . (Cost of aluminium snap beading shall bepaid in basic item):
-
-
-
With float glass panes of 5.50 mm thickness
5
-
-
Providing and fixing double action hydraulic floor spring of approvedbrand and manufacture conforming to IS : 6315, having brand logoembossed on the body / plate withouble spring mechanism anddoor weight upto 125 kg, for doors, including cost of cutting floors,embedding in floors as required and making good the same matchingto theexisting floor finishing and cover plates with brass pivot andsingle piece M.S. sheet outer box with slide plate etc. complete asper the direction of Engineer-in-charge.
-
-
-
With stainless steel cover plate minimum 1.25 mm thickness
1
-
-
Filling the gap in between aluminium frame & adjacent RCC/ Brick/Stone work by providing weather silicon sealant over backer rod ofapproved quality as per architectural drawings and direction of Engineer-in-charge complete.
-
-
-
Upto 5mm depth and 5 mm width
13
-
-
WATER PROOFING: Providing and laying water proofing treatment to vertical and horizontalsurfaces of depressed portions of W.C., kitchen and the likeconsisting of:
-
-
-
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed withwater proofing compound conforming to IS 2645 in recommendedproportions including rounding off junctionof vertical andhorizontal surface.
-
-
-
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarsesand) mixed with water proofing compound in recommendedproportion including rounding off junction ofvertical and horizontalsurface.
-
-
-
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints ofPVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/ sqm).
25
-
-
Providing and laying water proofing treatment on roofs of slabs byapplying cement slurry mixed with water proofing cement compoundconsisting of applying:
-
-
-
(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.
-
-
-
(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm
-
-
-
(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.
-
-
-
(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately.For the purpose of measurement the entire treated surface will be measured.
459
-
-
NON SCHEDULE ITEMS - CIVIL
-
-
-
Diluting and injecting of chemical emulsion for pre constructional anti termite treatment and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, treatment of soil under apron is to be laid, top surface of plinth filling junction of wall and floor, along with the external perimeter of the building, expansion joint, surrounding of pipes and conduits etc., complete as per IS:6313 (plinth area of the building at ground floor only shall be measured for payment).(Rate excluding the cost of chemical emulsion)
474
-
-
Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 (1 cement : 6 coarse sand) etc complete.The rate shall include labour, tax, transport ,lead,Lift ,scaffolding and curing etc complete as per specification.
71
-
-
Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 (1 cement : 6 coarse sand) etc complete.The rate shall include labour, tax, transport ,lead,Lift ,scaffolding and curing etc complete as per specification.
128
-
-
Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level up to floor V level thickness 20cm and above in: CM 1:6 (1 cement : 6 coarse sand) etc complete.The rate shall include labour, tax, transport ,lead,Lift ,scaffolding and curing etc complete as per specification
27
-
-
Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part I of 1979 for Super structure up to floor two level for 10 cm thick wall in: CM 1:6 (1 cement : 6 coarse sand) including cost of scaffolding etc complete.The rate shall include labour, tax,transport ,lead,Lift , scaffolding and curing etc complete as per specification
25
-
-
Providing and laying 300x 300 mm sizes Anti skid vitrified floor tiles of slip factor 0.5 -0.6 (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments ,labour, tax, transport,,all lead, lift etc., complete.
43
-
-
Providing and laying brick aggregate cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 brick aggregate ) with 40mm brick aggregate to a required depth and filling layers of 150mm each in toilets (sunken floor) at all levels with contractor's material, labour, tools and plants including lead and lifts etc as per the directions of the Engineer-in-charge.
5
-
-
Providing & fixing of glazed uPVC Sliding Window .They will be manufactured/ fabricated using multi chambered uPVC sections/profiles with EPDM gaskets having isolated drainage, reinforced with GI sections(120 gsm) through out and welded at corners through fusion welding. The dimensions of uPVC Profiles will be for outer frame - 60mm(W)±6x 50mm(H) ±6mm and sash - 35mm(W)±6 x 64mm(H) ±6mm. Outer Wall thickness of uPVC outer frame & sash shall be 2.5mm ±0.3mm, Windows shall be provided with 5mm clear glass, including standard hardware such as single point locking hardware. The windows will be installed using anchor fasteners, silicon sealant, easy glazing/deglazing at site etc. including cost and conveyance of all material,lead & lift, accessories, labour charges , transportation, erection at site complete for finished item of work.
90
-
-
Providing & fixing of uPVC top hung Ventilator . The ventilator will be manufactured/fabricated using multi chambered uPVC sections/profiles with EPDM gaskets having isolated drainage, reinforced with GI sections(120gsm) thickness of 1mm - 2mm throughout and welded at corners through fusion welding. The dimensions of uPVC Profiles will be for Outer Frame- 54mm(W)±6 x 55mm(H) ±6mm and mullion - 54mm(W)±6 x 76mm(H) ±6mm. Outer Wall thickness of uPVC Profiles shall be 2.5mm ±0.3mm . Ventilator Louvers shall be provided with 4 mm Pin Head glass and standard hardware. The Ventilators will be installed using anchor fasteners, silicon sealant etc. including cost and conveyance of all material, lead & lift,accessories, labour charges ,transportation, erection at site complete for finished item of work.
2
-
-
Providing and fixing SS tower bolts (304 grade) with necessary screws/ fixing accessories (as approved by engineer in-charge) Rate including all material, all labour charges,all lead, lift, transportation, taxes etc complete.
-
-
-
200x10 mm
23
-
-
100x10 mm
23
-
-
Providing and fixing hydralic door closer of rack and pinion type with standard arm, silver finish (as approved by engineer in-charge) with necessary screws / fixing accessories. Rate including all material, all labour charges,all lead, lift, transportation, taxes etc complete.
13
-
-
Providing and fixing SS Hanging floor door stopper (304 grade) (as approved by engineer in-charge) with necessary screws / fixing accessories. Rate including all material, all labour charges,all lead, lift, transportation, taxes etc complete.
15
-
-
Providing and fixing bright finished SS Mortice lock (304 grade) (as approved by engineer in-charge) with necessary screws / fixing accessories. Rate including all material, all labour charges,all lead, lift, transportation, taxes etc complete.
8
-
-
Providing and fixing bright finished SS aldrop (304 grade) (as approved by engineer in-charge) with necessary screws / fixing accessories. Rate including all material, all labour charges,all lead, lift, transportation, taxes etc complete.
-
-
-
300x16 mm
3
-
-
Providing and painting exterior walls with 2 coats of exterior weather proof emulsion paint ( low voc) over 1 coat of primer (low voc) of approved brand and manufacture to give an even shade. Rate including all material, labour charges, scaffolding,all lead, lift, transportation, taxes etc complete.
1143
-
-
Supplying and fixing of 24 gauge Chicken mesh including necessary nails for RCC / Masonry joints including labour charges etc., at all levels and locations, including preparing surfaces, scaffolding and as per drawings, specifications and as directed by Engineer-in-charge.
171
-
-
Supplying & fixing PVC corner beading (size 7mm or 10.5mm) for toilets complete etc., Rate including all material, all labour charges,all lead, lift, transportation, taxes etc complete.
57
-
-
Supplying and fixing CPVC rain water spout pipe of 25mm dia for sunshade (100 to 300mm length) with CPVC Tee etc complete. Rate including all material, all labour charges,all lead, lift, transportation, taxes etc complete.
63
-
-
PLUMBING WORKS
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.
-
-
-
All kinds of soil
32
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed.
-
-
-
Ordinary rock
4
-
-
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
-
-
-
All kinds of soil
-
-
-
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
265
-
-
Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5 metre).
-
-
-
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
45
-
-
Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m :
-
-
-
Ordinary rock :
-
-
-
Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia
75
-
-
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
131
-
-
ROOFING: Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
5
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
75 mm diameter
3
-
-
110 mm diameter
43
-
-
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
Coupler
-
-
-
75 mm
1
-
-
110 mm
4
-
-
Single pushfit Coupler
-
-
-
75 mm
1
-
-
110 mm
4
-
-
Single tee with door
-
-
-
75x75x75 mm
1
-
-
110x110x110 mm
4
-
-
Single tee without door
-
-
-
75x75x75 mm
1
-
-
110x110x110 mm
4
-
-
Bend 87.5°
-
-
-
75 mm bend
2
-
-
110 mm bend
8
-
-
Shoe (Plain)
-
-
-
75 mm Shoe
2
-
-
110 mm Shoe
8
-
-
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
75 mm
4
-
-
110 mm
29
-
-
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
5
-
-
SANITARY INSTALLATIONSProviding and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
Kitchen sink with drain board
-
-
-
510x1040 mm bowl depth 200 mm
1
-
-
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
Semi rigid pipe
-
-
-
40 mm dia
12
-
-
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
1
-
-
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing:
-
-
-
Rectangular shape 1500x450 mm
5
-
-
Providing and fixing PTMT Bottle Trap for Wash basin and sink.
-
-
-
Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms
11
-
-
Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms
1
-
-
WATERSUPPLY WORKS: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
Internal work - Exposed on wall
-
-
-
15 mm nominal outer dia Pipes
5
-
-
20 mm nominal outer dia Pipes
5
-
-
25 mm nominal outer dia Pipes
62
-
-
32 mm nominal outer dia Pipes
4
-
-
40 mm nominal outer dia Pipes
12
-
-
50 mm nominal outer dia Pipes
36
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
-
-
-
Concealed work, including cutting chases and making good the walls etc.
-
-
-
15 mm nominal outer dia Pipes
18
-
-
20 mm nominal outer dia Pipes
21
-
-
25 mm nominal outer dia Pipes
7
-
-
32 mm nominal outer dia Pipes
17
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.
-
-
-
Internal work - Exposed on wall
-
-
-
25 mm nominal outer dia Pipes
12
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.
-
-
-
65 mm dia nominal inner dia .Pipes
120
-
-
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
-
-
-
50 to 80 mm nominal bore
3
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
25 mm nominal bore (PN 1.6)
6
-
-
20 mm nominal bore
1
-
-
32 mm nominal bore (PN 1.6)
2
-
-
40 mm nominal bore (PN 1.6)
1
-
-
50 mm nominal bore (PN 1.6)
4
-
-
65 mm nominal bore (PN 1.6)
4
-
-
Providing and fixing ball valve (brass) of approved quality, High or low
pressure, with plastic floats complete :
-
-
-
20 mm nominal bore
1
-
-
25 mm nominal bore
3
-
-
Providing and fixing gun metal non- return valve of approved quality (screwed end) :
-
-
-
25 mm nominal bore
-
-
-
Horizontal
1
-
-
Vertical
1
-
-
Providing and fixing uplasticised PVC connection pipe with brass unions :
-
-
-
30 cm length
-
-
-
20 mm nominal bore
56
-
-
Constructing masonry Chamber 30x30x50 cm inside, in brick wor in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with
C.I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand :10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :
-
-
-
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
3
-
-
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mmdeep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
-
-
-
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
2
-
-
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm
deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c
necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
-
-
-
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
2
-
-
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality
-
-
-
65 mm diameter pipe
120
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
10000
-
-
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
-
-
-
15 mm nominal bore
4
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 (a)
-
-
-
15 mm nominal bore
8
-
-
Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces,tapers etc if required will be paid separately
-
-
-
80 mm nominal bore
2
-
-
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
20
-
-
DRAINAGE WORKS: Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :
-
-
-
180x150 mm size P type
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
4
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg)
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
IInside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
5
-
-
Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design.
-
-
-
1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid forseparately.
-
-
-
With F.P.S. bricks class designation 75
1
-
-
Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to 2.29 m
-
-
-
With F.P.S. bricks class designation 75
5
-
-
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
26
-
-
Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and bend encased all-round with cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) with all centering and shuttering required, cutting holes in walls and making good with brick work in cement mortar 1:4 (1 cement : 4 coarse sand) plastered with cement mortar 1:3 (1 cement : 3 coarse sand) on inside of the manhole wall, lead caulked joints between sand cast iron pipes and fittings, stiff cement mortar 1:1 (1 cement : 1 fine sand) joints between sand cast iron tee and S.W. pipe, making
required channels complete as per standard design and specifications :
-
-
-
150 mm dia sand cast iron drop connection
1
-
-
Extra for depths beyond 60 cm of sand cast iron drop connection complete:
-
-
-
For 150 mm dia sand cast iron drop connection
10
-
-
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neatcement on walls and bed concrete etc. complete as per standard design:
-
-
-
Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
14
-
-
Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
Extra for depth beyond 45 cm of brick masonry chamber :
-
-
-
For 500x700 mm size
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
-
-
For 600x 850 mm size
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
Providing and fixing Star white vitreous china extended wall mounting water closet of size 790x370x690 mm of approved shape including fixing of cistern with lid and dual flush fitting of flushing capacity 3/6 litre including chair brackets, EWC pan connector, necessary fittings including seat cover with all fittings and fixtures complete,angle valve with riser pipe including cutting and making good the walls and floors wherever required:
-
-
-
Star white Extended Wall mounted water closet constellation type, Adjustable Vitreous China Cistern with lid and White plastic seat (solid) cover with C.P. brass hinges and rubber buffers etc.,
7
-
-
Providing and fixing white vitreous china Counter top wash basin size 550 x 450 x 200mm, installed counter top at Granite / Marble counter with 15 mm C.P.brass basin tap, 32mm C.P brass waste coupling of standard pattern, including 2 each angle valve with riser pipes, connectors, adopters, all fittings etc cutting and making good the walls/slabs wherever required.(cut size it is recommended to make the cut in the marble/ Slab according to Wash Basin)
11
-
-
Supplying, fixing testing and commissioning of C.P.Brass Sink cock With Extended Swivel Spout (Wall Mounted) type with all fittings and fixtures complete of approved quality conforming to IS standards.
1
-
-
Supplying, fixing testing and commissioning of C.P.Brass two way bib cock with wall flange and aerator type with all fittings and fixtures complete of approved quality conforming to IS standards
7
-
-
Supply, fixing, testing and commissioning of HAND SHOWER (Health Faucet) near EWC consisting of 1mtrs. Long C.P. flexible tube with wall hook with all fittings and fixtures complete conforming to IS standards.
7
-
-
Providing and fixing C.P. Brass towel ring 180 dia with all necessary fittings with approved quality, complete as per standard specifications.
2
-
-
Supplying and fixing of Square & Round (125x125mm) aproximately Stainless Steel grating including GI hopper for connection of wash basin/ urinal with fittings, connectors & adopters.and all fittings etc., complete.
15
-
-
Supply, Installation and commissioning of water filter-cum-purifier which delivers potable water for the option of cold, normal & hot purified water two way use of dispensing taps. (6 stage purified cum dispenser) including required all necessary accessories etc., complete.
2
-
-
Providing & fixing hot dip galvanized proprietary factory fabricated supports including GI/SS fasteners, GI nut, bolts & washers, GI clamps, etc complete including cutting & chasing in brick / concrete wall and making same good.
3.5999999999999996
-
-
Providing and fixing insulation for hot water piping with elastomeric Class - O Nitrile Rubber Tubular Insulation & the same insulation with aluminum cladding 22 gauge for hot water piping. Before applying insulation, all pipe work and fittings shall be brushed and cleaned. Dust, dirt, mortar and oil shall be removed as per direction of Engineer-in-Charge.
-
-
-
25 mm tube inner dia Pipes
15
-
-
Providing and fixing soil, waste and vent pipes PVC pipes of IS 13592 (for Pipes) & IS 14735 (for fittings) Type - B, including all fittings and jointing of pipes, all kinds of support and the cost of cutting chases and making good the same including connectors, fittings testing of joints, a complete as per direction of Engineer-in-Charge
-
-
-
75mm dia pipes
33
-
-
100mm dia pipes
23
-
-
150mm dia pipes
15
-
-
Providing and fixing on wall face unplasticised Rigid PVC soil, waste and vent pipe fittings conforming to IS : 14735 Type B, including solvent cement joint
-
-
-
Coupler
-
-
-
75mm dia pipes
7
-
-
100mm dia pipes
5
-
-
150mm dia pipes
3
-
-
Single TEE with Door
-
-
-
(75x75x75mm)
7
-
-
(100x100x100mm)
5
-
-
(160x160x160mm)
5
-
-
Single TEE without Door
-
-
-
(75x75x75mm)
7
-
-
(100x100x100mm)
5
-
-
(160x160x160mm)
5
-
-
Bend 87.5°
-
-
-
75mm dia pipes
7
-
-
100mm dia pipes
5
-
-
150mm dia pipes
5
-
-
Bend 45°
-
-
-
75mm dia pipes
7
-
-
100mm dia pipes
5
-
-
150mm dia pipes
5
-
-
Pipe Clip
-
-
-
75mm dia pipes
7
-
-
100mm dia pipes
7
-
-
150mm dia pipes
7
-
-
Single 'Y" with door
-
-
-
75mm dia pipes
7
-
-
100mm dia pipes
5
-
-
150mm dia pipes
5
-
-
Single 'Y" without door
-
-
-
75mm dia pipes
7
-
-
100mm dia pipes
5
-
-
150mm dia pipes
5
-
-
Supplying and fixing of of 110 mm dia SWR PVC Vent Cowl including adopters and all fittings etc., complete.
2
-
-
Supplying, Providing, fixing, testing and commisioning of Solar water heater booster pumps (Circulation pump) as per IS Standards and all other relavant standards etc., complete. As per Engineer - in - charge.
1
-
-
Providing and fixing of approved make & suitable model of Solar Hot water system of capacity 250 ltrs. The system must consist of 2 each solar water heater panels of size not less than 1900x1000mm and a single collection tank of size not less than 600mm dia including all fittings and acessories complete.,
1
-
-
Providing and constructing bore well of 165mm dia & 150Rm depth including providing and fixing PVC casing pipes of approved quality 165mm internal dia including accessories, labour tools and required equipment etc.,complete.
-
-
-
Identifying the point for drilling the bore well
1
-
-
Drilling of 165mm dia average pilot bore by mud slush direct rotary ring in all sorts of soil of as per IS-2800 suitable for 165mm dia bore PVC pipes including carting of rig and other equipments at site etc. complete
150
-
-
Bore well casing pipe
-
-
-
Providing fixing 160mm dia PVC casing pipes Confirming to IS in bore well to a required depth etc.,complete.
150
-
-
Testing of water samples, as directed by engineers/consultant
1
-
-
Supplying and fixing heavy duty clamp of size 900mmx100mmx15mm with bolts and nuts etc.complete
1
-
-
Providing and fixing top cap of PVC Dummy suitable for 165mm dia nominal bore pipe etc. complete
2
-
-
Design, supply and installation of 3HP submersible pumpsets of 3 phase electric motor frame with coupling guard and it's fastners, and pumping water from borewell including providing, laying jointing 65mm dia GIpipe"C" class confirmed as per relevant IS code pump shall be installed at a depth of 65m from ground level and delivery pipe shall be left 1.50m above ground level. Rate to include cost of pumpsets, GI pipes with in the borewell, 3 core x 4sqmm electric cable, star delta starter, single phase preventer, dry running preventer,outer door type electrical panel board, start & stop bush button, voltmeter Amper meter,etc., provision for the maintenance of the pumps, chain block with pulley etc complete. The supplier shall give one year guarantee, complete as specified and directed by Engineers's/consultant. (Submersible Pump set in tube well)
1
-
-
Providing & fixing UPVC pipes and all kind of fittings as per IS 14333, PE 80 & PN6, accessories, complete as per specification and directed by ingineer incharge.
-
-
-
150 mm diameter
265
-
-
ELECTRICAL WORKS: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group C
158
-
-
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
2
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
674
-
-
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
1024
-
-
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
1827
-
-
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
32
-
-
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
189
-
-
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
153
-
-
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
2 Pair
405
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20 mm.
331
-
-
25 mm.
315
-
-
32 mm.
21
-
-
40 mm
21
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
15/16 A switch
14
-
-
3 pin 5/6 A socket outlet
12
-
-
6 pin 15/16 A socket outlet
14
-
-
Telephone socket outlet
11
-
-
TV antenna socket outlet
5
-
-
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
33
-
-
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
-
-
-
1 or 2 Module (75 mmX75 mm)
95
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
31
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
30
-
-
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
33
-
-
Installation, testing and commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/ LED lamps per fitting, complete with all accessories including connections etc. as required.
80
-
-
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
-
-
-
Upto 450 mm sweep
12
-
-
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
12
-
-
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.
-
-
-
1 run of cable
385
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlet and 2 Nos. 5/ 6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).
11
-
-
Supplying and fixing PVC batten/ angle holder including connections etc. as required.
7
-
-
MCCB, MCB & DB’S: Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single Pole
60
-
-
Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A, 240 V “C” curve DP MCB complete with connections, testing and commissioning etc. as required.
1
-
-
KITCHEN 3PHASE SOCKET : Suppy and fixing 30 amps 415 volts TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top along with 30 amps "C" curve TP MCB in sheet steel enclosure, on surface or in recess with chained metal cover for the socket outlet and complete with connections, testing and commisioning etc. as required
2
-
-
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
4
-
-
Supplying and fixing Cable End Box (Loose wire box)(IP 43) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with testing and commissioning etc. as required.
-
-
-
For 8 way, Double door SPN MCBDB
1
-
-
EARTHING: Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required..
4
-
-
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
110
-
-
Providing and fixing 6 SWG G.I. wire on surface or in recess for loop earthing as required.
160
-
-
LIGHTNING CONDUCTOR: Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
2
-
-
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required.(For horizontal run)
250
-
-
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required. (For vertical run)
30
-
-
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 Nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
2
-
-
MV CABLE LAYING: Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refiling the trench etc. as required.
-
-
-
Upto 35 sq. mm
165
-
-
MISC. CIVIL ITEMS: Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc. as required.
-
-
-
300 mm dia
10
-
-
FITTINGS: Supplying of 10W LED Wall mounted light with all accessories Ref: Philips Catalogue No.33094 / QWG 325 (or) Equivalent
7
-
-
Supplying of 20W LED 1600 lum Downlight surface mounted Fitting with all accessories Ref: Philips Catalogue No. SM200C LED15S 4000 PSU OD WH (or) Equivalent
11
-
-
Supplying of 12W LED Down light surface mounted Fitting with all accessories. Ref: Philips Catalogue No. SM260C LED 12S 6500 PSU 12.1W (or) Equivalent
28
-
-
Supplying of 12W LED Downlight Recessed mounted Fitting with all accessories Ref: Philips Catalogue No. DN193B LED12S-6500 PSU WH(or) Equivalent
4
-
-
Supplying of 25W LED Surface Mounted LED light Fitting with all accessories Ref: Philips Catalogue No.RC380B LED30S-6500 G4L60 W60 (or) Equivalent
10
-
-
Supplying of 40W LED Light fitting Endural LED Waterproof and including all accessories Ref: Philips Catalogue No. BN108C LED NW WH (or) Equivalent
12
-
-
Supplying of 40W LED Linear light fitting including all accessories Ref: Philips Catalogue No. WT201 LED 40S CDL (or) Equivalent
5
-
-
Supplying of 6W LED Bulkhead light Fittings with all accessories Ref : Philips catalogue No. WT202W LED6S NW PSU S2 PC (or) Equivalent
3
-
-
CEILING FAN: Supply and fixing of 1200 mm (48") sweep ISI Mark Ceiling Fan as per IS 374 -1979 and 230V, A.C 50 Hz.Ceiling fan with 3 Blades and double ball bearing and low power consumption fan with all standard accessories.
7
-
-
Supply and fixing of 1400 mm (56") sweep ISI Mark Ceiling Fan as per IS 374 -1979 and 230V, A.C 50 Hz.Ceiling fan with 3 Blades and double ball bearings with all standard accessories.
7
-
-
EXHAUST FAN: Supply of 300mm dia wall mounted fan as per standard specification and as directed by Engineer - in - charge.
5
-
-
Supply of 150 mm dia exhaust fan with automatic louvers shutters.
7
-
-
MCB: Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40A 4P
1
-
-
63A 4P
2
-
-
RCBO: Supplying and fixing of following rating, 240/415 volts,Residual Circuit Breaker with overload protection (RCBO) following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
25A 100mA Double Pole
1
-
-
40A 100mA Double Pole
3
-
-
63A 100mA Double Pole
6
-
-
DISTRIBUTION BOARDS: Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, 7 Segment distribution Board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required
-
-
-
4 Way
1
-
-
6 Way
1
-
-
8 Way with phase selector switch
1
-
-
MV CABLES SUPPLY: Supply of PVC / XLPE insulated armoured cables with aluminium conductors for working voltages up to and including 1100V confirming to IS 1554 part I 1988 for PVC and IS 7098 Part I for XLPE.
-
-
-
4C X 6 sq. mm Al.Ar.XLPE UG Cable
170
-
-
3C X 2.5 sq. mm Cu.Ar.XLPE Cable
30
-
-
MV CABLE END TERMINATION: Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
-
-
-
4C X 6 sq. mm Al.Ar.XLPE UG Cable
10
-
-
3C X 2.5 sq. mm Cu.Ar.XLPE Cable
4
-
-
Over Head service Line Mains
-
-
-
Supply and run of 4 x 10 Sq.mm (140/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V on 7/20 G.I Bearer wire for service connection mains as per KSEB norms
-
-
-
4C X 10 sq. mm (140/0.3) PVC unsheathed SC Cu. Cable
50
-
-
PANELS
-
-
-
Cabteen & Bank PSB: Supply and erection of powder coated floor mounting Metering Panel panel made of 1.6mm thick CRCA sheet steel dust and vermin proof enclosure with suitable size of aluminium bus bar for main and interconnecting switchgear, LCD Display Three Phase Energy meter with necessary phase indication lamp and earthing as per requirement of CEIG and IE regulation. For the provision of following rated switchgear in the panel.
Incoming :
i) 100A FP MCCB with Rotary Handle - 1 No
ii) 100A CT coil for operating 3Ph Energy Meter with RS485 -1 Nos.
Outgoings :
63A 4P 10kA MCB - 4 Nos
2
-
-
Cabteen & Bank Metering Panel
-
-
-
Supply and erection of powder coated floor mounting Metering Panel panel made of 1.6mm thick CRCA sheet steel dust and vermin proof enclosure with suitable size of aluminium bus bar for main and interconnecting switchgear with necessary phase indication lamp and earthing as per requirement of CEIG and IE regulation. For the provision of following rated switchgear in the panel.
Incoming :
i) The provision of 30-40A 3Ph 4W LCD Display TVM KSEB Meter with RS485 - 1 Set
ii) 100A TP+N Proceling Fuse with RYB Indicating lamp - 1 Set. iii) 100A 4P MCB (Isolator) - 1 No Above matering proction is are sealing provision is required.
2
-
-
NETWORK SOCKET
Supplying and fixing of CAT-6 Network socket in the exisitng suitable size/ modules, GI box along with modular base & cover plate and as per the direction of engineer incharge.(Make: Legrand or Equivalent.)
11
-
-
Supplying, fixing, testing and commissioning of 24 port Gigabit switch and CAT-6 24 port switch with patch panel including all accessories. As per the manufacturer specification and direction of engineer in charge. (Make: D-Link or equivalent.)
1
-
-
Telephone Crone Box: Supply, Installation, testing and Commissioning of 20 pair crone connector with G.I box including all accessories. As per the manufacturer specification and as per the direction of engineer incharge.
1
-
-
SAFETY EQUIPMENTS
supply and delivery of the following safety equipments with allied material as required.
a) 10 kg capacity DCP type fire extinguisher -2 Nos c) First aid box small size -1 Set
d) first aid resuscitation chart laminated both in local language and English -1 Set
1
-
-
OUTDOOR LIGHT: Supply and Fixing of 4W LED Bollard Light with all associers similar to Philips Make Cat No : BCP150 LED150/WW PSU 220-240V 7043 or Equlant
2
-
-
Supply and fixing of Green line Range 36W LED Street Light Outdoor type with high efficiency Lumen and dust Resistants Protection (IP 65) Class I type(Make: Philips BRP 409 LED CW 036 MR FG S1 PSU GR or Equivalent)
4
-
-
Supply,delivery & installation of 7m long octogonal GI Pole made out of 3mm thick galvenised sheets (both inner and outer surface being galvanised) with single arm of 1.5m length, 8 degree tilt.with botton dia of 150mm, top dia of 76mm similar to bajaj type BOP-7030 or equivalent with a foundation base plate of size 240x240x20mm and 4nos. 20mm dia anchor bolts duly embedded in 1:2:4 P.C.C including excavation of pit,concreting providing PVC pipes of cable entry, providing junction box with 6amp SP MCB loop in loop out arrangement termal block wiring with 3core 1.5sq.mm PVC insulated copper wire from junction box upto the fitting and with a bracket of 1500 mm as required as per direction of Engineer in charge.
4
-
-
APPROVAL
Preparing and obtaining the approval from Local Body Electrical to carryout electrical installation and duly submitting the drawing for approval including necessary inspection fees for inspection and obtaining Safety certificate for entire new installation
1
-
-
FIREFIGHTING WORKS: Supplying, fixing and testing CI sluice valves conforming to IS 780 including making of necessary screwed joint/ flanged joint and also including cost of jointing materials etc., complete as required as per PN 1.6 tested upto 24kg/cm2 pressure.
-
-
-
a) 100mm dia
2
-
-
b)150mm dia
1
-
-
Providing and fixing in position GM gate valve with C.l. wheel of approved quality (screwed end} nominal bore including cost of all materials, labour and HOM of equipments with all· leads complete as per specifications.
-
-
-
25mm
2
-
-
65mm
2
-
-
Providing and fixing in. position nominal bore gun metal non-return valve Horizontal type of approved make including cost of all materials, labour and HOM of equipments with all leads complete as per specifications.
-
-
-
100mm
2
-
-
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
-
-
-
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
-
-
Supplying, storing, handling, shifting, installation, testing and commissioning, supervision of testing of electric driven terrace pump of capacity 450 Lpm at 35.0 m Head suitable for automatic operation of horizontal end section centrifugal type sychoronous speed of 2900 rpm TEFC confirming to IP : 55 & Flexible coupling & coupling guard mounted on common bed plate of fabricated mild steel channel or cast iron type as required with all the necessary accessories viz. Auto/Maunal switch, Star Delta Starter suitable for 10 h.p , remote contolling thru pressure switch (0-10kg/cm2) Pressure guages, dry running & single phase preventer -minilec make, operating on 3Ph 50Hz, 400/440V AC supply including foundation, bolts etc.
1
-
-
Supply, installation testing and commissioning of approved make heavy duty (Class 'C') GI Pipes and fittings confirming to as per is 1239 such as Tees elbows check nuts Unions, Flanger, Nipples etc., including cutting welding, Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S. angle supports work includes two coats of metal primer and two coats of Red enamel paint etc.)
-
-
-
b) 150mm dia
15
-
-
c) 100mm dia
10
-
-
f) 50 mm dia
10
-
-
i) 25mm dia
10
-
-
Providing and fixing blank flanges as per table 'E" with asbestos gasket, nut, bolts, washers complete
-
-
-
a)65mm dia
2
-
-
b)80mm dia
2
-
-
c) 100mm dia
2
-
-
SITC of 63mm dia single headed Gun metal Hydrant value with black cap and wheet as per IS 5290 etc., complete Make: WINCO / NEW Age.
2
-
-
SITC of Hose cabinet made out of 18 gauge M.S. Sheet with double glass door with locking arrangement and painted with two coats of Fire red Enamel paint at outer side of the box and two coats of white enamel paint at inner side of the box is to accommodate 2 nos. of Fire hose. box size 800 x 600 x 250
2
-
-
Providing and fixing two way fire service inlet to the 100mm dia GI 'C' class pipe wet riser to be house in MS bolt with glass cover for front side.etc. complete.
1
-
-
SITC of Gun metal Branch pipe size of 63mm dia x 19mm dia as per IS 903 Make: WINCO/NEWAGE
2
-
-
Fire Alarm System: SITC of 2x1.5 Sq.mm copper armoured cable with fixture etc., .
2
-
-
SITC of electronic Hooter, it consists of electronic circuit to give dual Fire alarm sound with works 24V DC with speaker all enclosed in suitable in MS. 16 gauge red painted box.
2
-
-
Providing and laying 25mm dia M.S. 16 gauge conduit pipes and fittings for fire alarm system, including necessary all accessories etc. complete.
4
-
-
Fire Extinguishers: Providing 6Kg Fire Extinguisher Mono Ammonium Phoshate Powder 50, Stored Pressure Type, Pressure Gauge, Gross weight 9.5 Kg, empty weight 3.5 Kg, Can Height 435MM, Diameter 160MM, Discharge Time less than 9 Sees, Controllable discharge mechanism, Range minimum 4 meters, applicable on Class A,B,C and electrically started Fire, A Rating 21A, B Rating 898, Can construction: Deep drawn & Co., Mig welded, valve construction : Forging and Machining, Internal Coating of Can ; Epoxy powder coating, External Coating of Can : Epoxy Polyster power coating, sheet metal thickness: 1.60MM, Helium Leak Detection Tested, lSI and EN Approved, 5 years warranty.
2
-
-
Providing 4.5 Kg C02 Gas Type Fire Extinguisher, Trolley Mounted, Easy Weight Management used Unused Mechanism, Squeeze Grip, Gross weight 19.1 Kg, empty Weight 14.6 Kg, Can Height 857MM Diameter 140MM, Discharge Time Less than 10 Secs, Controllable discharge· ( ' mechanism, Applicable on Class B&C Fire, B Rating 218, Can Constrution :Hot spinning/Forging, Value Construction: Forging & Machining, Internal Coating of Can : Not Apllicable, External Coating of Can : Spray Painting, Sheet metal thickness : 4.5 MM lSI Approved, 1 Year Warranty.
1
-
-
Supplying of four bucket stand along with buckets.
2
-
-
Fire Hose : SITC of RRL Fire hose of 63mm dia 15m length as per IS 84.23 binded with one set of male and female lnstantainious Gun metal couping as per IS 903 WINCO/NEW AGE
2
-
-
Hose Reel: SITC of Hose reel cane M.S. Pressed reel of 600mm dia and swing upto 170 -degree with "L" shape carrier
2
-
-
SITC of 19mm dia with wire binded Nylon hose. length of 36.5 mtrs.
2
-
-
SITC of Manual Call point: It consists of Micro push button switch with LED and circutary etc., works on 24V DC LED indicator with glass Fronted, Aiso with hammer foi breaking the glass incase of Fire. Accomodated in 75x75x30mm size M.S. 16 gauge red enamel painted box. make : to suit main control panel
2
-
-
SITC of Gun metal AIR RELEASE VALVE SIZE OF 25mm dia
2
-
-
Y ' Strainer - CI `Y' strainer with bronze perforated sheet basket including rubber gasket, flanges, nuts, bolts and washers, complete as required.
-
-
-
c)150mm dia
1
-
-
Providing and fixing FLEXIBLE CONNECTORS (Expansion bellows) - On all suction and delivery lines double flanged reinforced neoprene flexible pipe connectors shall be provided. Connectors should be suitable for maximum working pressure of each pipe line on which it is mounted and tested to a test pressure of 1:5 time the operating pressure. Length of the connector shall be as per manufacturer’s standard.
-
-
-
d)150mm dia
1
-
-
LANDSCAPE WORKS: Providing and planting Korean grass lawn planting work including grass, land preparation, planting labour charges, pre and post pesticide apply and maintaning the lawm for 3 months.
295
-
-
Providing and planting border plants including land preparation, planting labour charges, pre and post pesticide apply and maintaning the lawm for 3 months.
6
-
-
Providing and planting flowering ornamental shrubs including land preparation, planting labour charges, pre and post pesticide apply and maintaning the lawm for 3 months.
3
-
-
Providing and planting palm trees including land preparation, planting labour charges etc.,
-
-
-
Areca palms 6ft height
6
-
-
Supplying and filling WIth Red Soil including levelling, watering, etc., complete.
59
-
-
Supplying and filling WIth River Sand including levelling, watering, etc., complete.
2
-
-
Supplying and filling WIth Manure including levelling, watering, etc., complete.
3
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements