Kerala State Housing Board Tender
... More
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Kerala State Housing Board Tender
Civil And Construction
Bridge Construction
Electrical and Electronics
Solar Installation and Products
Electrical Works
Eprocure
Opening Date7 Mar 2025
Closing Date24 Mar 2025
Tender Amount₹ 5,77,23,490
Technical
Technical
Financial
Additional Eligibility
Class Of Bidder
... View More
A Class.
Technical Capacity
... View More
The bidder must have experience of having successfully completed at least one similar work costing more than 40% of the estimated cost of the work put to tender, for Government/Semi-Government clients during the last 5 years. The similar nature of works should be of the same nature and type as the work tendered, with a minimum value as stated above. The required prior work experience includes details such as name of work, agreement number, estimated cost, contract price, date of start and completion, and whether the work was completed satisfactorily. The full value of completed work will be considered, whether or not the date of commencement is within the said 5-year period. Additionally, the bidder's annual financial turnover during the last 5 years, ending 31st March of the previous financial year, should be demonstrated through certified audited copies of balance sheet and profit and loss account. The annual financial turnover and cost of completed works of previous years shall be given a weightage of 5% per year to bring them at the current price level. The bidder should also possess adequate working capital of more than 10% of the probable estimated cost of work for which they are bidding. The bidder shall have successfully completed at least one similar work costing more than 40% of the estimated cost of the work described during the last five years. A certificate to this effect from the agreement executing authority of the completed similar work shall invariably be submitted along with the tender documents. The certificate should contain details such as name of work, agreement number, estimated cost, Contract Price, date of start and completion as per agreement, completed amount of work, etc. In some cases, no specific information is provided regarding the required prior work experience for the bidder, including value and percentage of similar works completed. However, the bidder is required to provide details of their experience and past performance of works of similar nature within the past five years. The required prior work experience for the bidder is not explicitly mentioned in terms of specific years or amount in some instances. However, the available information suggests that the bidder should have at least one similar work experience with a value of more than 40% of the estimated cost of the work, and the bidder should possess adequate working capital of more than 10% of the probable estimated cost of work. The bidder's annual financial turnover during the last 5 years should also be demonstrated, with a weightage of 5% per year to bring them at the current price level. Therefore, the required prior work experience for the bidder includes similar work experience with a value of more than 40% of the estimated cost, and a working capital of more than 10% of the estimated cost. The annual financial turnover during the last 5 years should also be demonstrated.
Costs
EMD
₹ 2,00,000Document Cost
₹ 11,800Tender Fee
Refer Documents
Summary
Seethathode Shopping Complex Phase Ii Electrical Fire Fighting Lift Theater Interior Works
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_KSHB_746535_1Tender No
2025_CE _KSHB_01 (C)Tender Authority
Kerala State Housing Board ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C
50
-
-
... More
1.11 : Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
45
-
-
... More
1.55.2 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group B
20
-
-
... More
1.55.3 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C
40
-
-
... More
1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire
300
-
-
... More
1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
250
-
-
... More
1.14.3 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire
100
-
-
... More
1.17.1 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.1 x 1.5 sq. mm
100
-
-
... More
1.17.2 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 1.5 sq. mm
100.52
-
-
... More
1.17.3 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm
100
-
-
... More
1.17.6 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 1.5 sq. mm
100
-
-
... More
1.17.9 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.9 x 1.5 sq. mm
100
-
-
... More
1.17.12 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm
100
-
-
... More
1.17.15 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 2.5 sq. mm
100
-
-
... More
1.17.21 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm
100
-
-
... More
1.25 : Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
35
-
-
... More
1.26 : Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
30
-
-
... More
1.31 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in
recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps
modular switch, connection etc. as required. (For light plugs to be used in non residential
buildings).
60
-
-
... More
1.33 : Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block
including connection etc as required.
125
-
-
... More
1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch
191
-
-
... More
1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch
72
-
-
... More
1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet
94
-
-
... More
1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet
45
-
-
... More
1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)
48
-
-
... More
1.27.2 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)
17
-
-
... More
1.27.3 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.4 Module (125mmX75mm)
8
-
-
... More
1.27.4 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)
70
-
-
... More
1.27.5 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm)
5
-
-
... More
90.10.3.15 : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )
16
-
-
... More
90.10.3.33 : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )
16
-
-
... More
1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm
1772
-
-
... More
1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
1210
-
-
... More
1.21.3 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm
291
-
-
... More
DB
-
-
-
... More
2.3.3 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door
47
-
-
... More
2.3.4 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator16 way, Double door
5
-
-
... More
2.4.1 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)4 way (4 + 12), Double door
8
-
-
... More
2.4.2 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 way (4 + 18), Double door
4
-
-
... More
2.4.3 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)8 way (4 + 24), Double door
1
-
-
... More
90.11.1.18 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required
1
-
-
... More
90.11.1.19 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required
3
-
-
... More
od178645/2024_2025 : Supplying and fixing following rating, 415 volts, Molded Case Circuit Breaker breaker of following poles in the existing MCCB VDB complete with connections, testing and commissioning etc. as required. 32A 16kA Four pole MCB
1
-
-
... More
od178646/2024_2025 : Supplying and fixing following rating, 415 volts, Molded Case Circuit Breaker breaker of following poles in the existing MCCB VDB complete with connections, testing and commissioning etc. as required.40A 25kA Four pole MCCB
1
-
-
... More
od178647/2024_2025 : Supplying and fixing following rating, 415 volts, Molded Case Circuit Breaker breaker of following poles in the existing MCCB VDB complete with connections, testing and commissioning etc. as required. 63A 25kA Four pole MCCB
3
-
-
... More
od178648/2024_2025 : Supplying and fixing following rating, 415 volts, Molded Case Circuit Breaker breaker of following poles in the existing MCCB VDB complete with connections, testing and commissioning etc. as required. 100A 25kA Four pole MCCB
3
-
-
... More
2.2.1 : Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required100 Amp, 16 KA, TPMCCB
3
-
-
... More
2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
179
-
-
... More
2.10.3 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole
17
-
-
... More
2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole
13
-
-
... More
od178650/2024_2025 : Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.40A Triple pole
5
-
-
... More
od178651/2024_2025 : Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A Triple pole
11
-
-
... More
od178652/2024_2025 : Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40A Triple pole and neutral
8
-
-
... More
od178653/2024_2025 : Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A Triple pole and neutral
11
-
-
... More
od178654/2024_2025 : Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 32A Triple pole and neutral
4
-
-
... More
2.11 : Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
20
-
-
... More
od178657/2024_2025 : Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections , testing and commissioning etc. as required 32A DP isolator
2
-
-
... More
2.12.1 : Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
2
-
-
... More
2.13.1 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
2
-
-
... More
2.13.3 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.100 amps
2
-
-
... More
2.15.2 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
8
-
-
... More
od178658/2024_2025 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A
11
-
-
... More
od178659/2024_2025 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A
4
-
-
... More
2.14.2 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
47
-
-
... More
od179542/2024_2025 : Supplying and fixing 5 Module (125x200 x 122) indoor-polystyrene IP65 Protection Thermoplastic enclosure on surface complete with connections, testing and commissioning etc. as required.
5
-
-
... More
od179543/2024_2025 : Supplying and fixing 3 Module (100x150x96) indoor-polystyrene IP65 Protection Thermoplastic enclosure on surface complete with connections, testing and commissioning etc. as required.
2
-
-
... More
LIGHT FITTINGS
-
-
-
... More
od179528/2024_2025 : Supplying Installation,testing & commissioning of industrial sockets as per IEC 61439-3 suitable for flush mounting and surface mounting,supplied with neutral links and provision for mounting modular devices.63 A 3P +N+ E-FP
1
-
-
... More
od179529/2024_2025 : Supplying Installation,testing & commissioning of industrial sockets as per IEC 61439-3 suitable for flush mounting and surface mounting,supplied with neutral links and provision for mounting modular devices.32 A 2 P + E-DP
2
-
-
... More
1.47 : Supplying and fixing extra down rod of 10 cm length G.I. pipe, 15 mm dia, heavy gauge including painting etc. as required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
35
-
-
... More
od179530/2024_2025 : Supplying Installation,testing & commissioning of 400mm sweep wall fan.
6
-
-
... More
od179531/2024_2025 : Supplying Installation,testing & commissioning of 600mm sweep industrial type wall fan.
8
-
-
... More
od179532/2024_2025 : Supplying Installation,testing & commissioning of 1200mm sweep (White) 5 star rated BLDC ceiling fan without regulator including wiring the down rod of std.length ( upto 30cms) with 1.5 Sqmm PVC insulated copper conductor, single core cable etc as required.
15
-
-
... More
od179533/2024_2025 : Supply and fixing of 14.4W/mtr RGB strip light with Aluminium profile, rated LED drivers, RGB controllers, amplifier, remote controls required for specified length of strip light (with all accessories)
506
-
-
... More
od179534/2024_2025 : Supply, installation, testing and commissioning of following surface/ recess mounting type LED light fittings complete with all accessories and lamp etc. directly on the ceiling/wall ( All ceiling mounted fittings shall be fixed with 2 Nos anchor fasteners. (Extra chain shall be provided for suspension of recess fittings) including connections using 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as required. 4 ft linear LED batten light 22 W
143
-
-
... More
od179535/2024_2025 : Supply, installation, testing and commissioning of following surface/ recess mounting type LED light fittings complete with all accessories and lamp etc. directly on the ceiling/wall ( All ceiling mounted fittings shall be fixed with 2 Nos anchor fasteners. (Extra chain shall be provided for suspension of recess fittings) including connections using 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as required. 7 W recess mounted LED down light
103
-
-
... More
od179536/2024_2025 : Supply, installation, testing and commissioning of following surface/ recess mounting type LED light fittings complete with all accessories and lamp etc. directly on the ceiling/wall ( All ceiling mounted fittings shall be fixed with 2 Nos anchor fasteners. (Extra chain shall be provided for suspension of recess fittings) including connections using 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as required. 18 W recessed mounted LED down light
100
-
-
... More
od179537/2024_2025 : Supply, installation, testing and commissioning of following surface/ recess mounting type LED light fittings complete with all accessories and lamp etc. directly on the ceiling/wall ( All ceiling mounted fittings shall be fixed with 2 Nos anchor fasteners. (Extra chain shall be provided for suspension of recess fittings) including connections using 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as required. 15 W recessed mounted LED down light
100
-
-
... More
od179538/2024_2025 : Supply, installation, testing and commissioning of following surface/ recess mounting type LED light fittings complete with all accessories and lamp etc. directly on the ceiling/wall ( All ceiling mounted fittings shall be fixed with 2 Nos anchor fasteners. (Extra chain shall be provided for suspension of recess fittings) including connections using 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as required. 12 W surface mounted LED down light
80
-
-
... More
od179539/2024_2025 : Supply and fixing of 30W twin recess mounted LED COB light with DALI dimmable LED driver
56
-
-
... More
od179540/2024_2025 : Supply, installation, testing and commissioning of following surface/ recess mounting type LED light fittings complete with all accessories and lamp etc. directly on the ceiling/wall ( All ceiling mounted fittings shall be fixed with 2 Nos anchor fasteners. (Extra chain shall be provided for suspension of recess fittings) including connections using 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as required. 10 w bulk head LED luminaire
36
-
-
... More
od179541/2024_2025 : Supply, installation, testing and commissioning of following surface/ recess mounting type LED light fittings complete with all accessories and lamp etc. directly on the ceiling/wall ( All ceiling mounted fittings shall be fixed with 2 Nos anchor fasteners. (Extra chain shall be provided for suspension of recess fittings) including connections using 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as required. 80 W linear LED high bay
6
-
-
... More
od190656/2024_2025 : Supply installation testing and commissioning of DALI controll system for theater lights
1
-
-
... More
TRANSFORMER ,RMU,DG,UPS
-
-
-
... More
od179549/2024_2025 : Supply Installation and testing and commissioning of 20 KVA With following specifications 40 kw Frame with 20kw modules (6.7x3) with the following specifications Input pf : 0.99 @ full load Output pf : 1 Input voltage range: 320V -460V with cut off Output 400V THDi : ≤ 3% THDv< .5% in linear Load and <1% in nonlinear load. DC to AC Efficiency: 96% Ambient Temperature: 0-40°C IP21 Generator Compatibility. Pure sine wave Battery over charge & under charge cut off. Bypass arrangement. Indications: Digital indications of Input V & A, output V & A, Battery charge, Temperature EN/IEC 620401 for General Safety compatibility EN/IEC 620402 for Electromagnetic Compatibility. EN/IEC 620403 for Performance ISO14025 or PEP for Environmental Compatibility LED + LCD Display Battery Rack and interconnecting cables Should be provided UPS Approved make legrand/Numeric/Vertiv/ ABB Supply Installation and testing and commissioning of SMF battery C20 rated and any make of exide / quanta/Panasonic. For 30 min backup at 20kva .8 pf load 12v 75ahx 20 nos. minimum
1
-
-
... More
od179550/2024_2025 : Supply Installation and testing and commissioning of 6 kVA ups with the following specifications Input pf : 0.99 @ full load Output pf : 1 Input voltage range: 140V -280V Isolation transformer built-in at input side Output 230V THDi : ≤ 5% Ambient Temperature: 0-40°C IP20 Generator Compatibility. Pure sine waveBattery overcharge & under charge cut off. Bypass arrangement. Indications: Digital indications of Input V & A, output V & A, Battery charge, Temperature EN/IEC 620401 for General Safety compatibility EN/IEC 620402 for Electromagnetic Compatibility. EN/IEC 620403 Battery Rack and interconnecting cables will be provided OEM Service center Should be available locally. Warranty certificates for ups, transformer and batteries to be provided by UPS OEM UPS Approved make legrand/Numeric/Vertiv/ ABB Supply Installation and testing and commissioning of SMF battery c20 rated and any make of Exide / quanta/Panasonic. For 30 min backup at 6kva .8 pf load 12v 26ahx 20 nos. minimum<br>
2
-
-
... More
od179551/2024_2025 : Supplying and fixing exhaust gas piping with welded black MS, B Class pipe conforming to IS:3589 cut to required lengths and installed with necessary bends supports and clamps anti-vibration mounting, insulation of exhaust system with mineral wool/Rockwool, 50 mm thick wire mesh & aluminum cladding etc., as required as per specifications. upto the top of the building including adequate support members as per pollution control board norms.150 mm dia
10
-
-
... More
od179552/2024_2025 : Supplying and fixing exhaust gas piping with welded black MS, B Class pipe conforming to IS:3589 cut to required lengths and installed with necessary bends supports and clamps anti-vibration mounting, insulation of exhaust system with mineral wool/Rockwool, 50 mm thick wire mesh & aluminum cladding etc., as required as per specifications. upto the top of the building including adequate support members as per pollution control board norms.125 mm dia
10
-
-
... More
od179553/2024_2025 : Supplying and fixing exhaust gas piping with welded black MS, B Class pipe conforming to IS:3589 cut to required lengths and installed with necessary bends supports and clamps anti-vibration mounting, insulation of exhaust system with mineral wool/Rockwool, 50 mm thick wire mesh & aluminum cladding etc., as required as per specifications. upto the top of the building including adequate support members as per pollution control board norms. 100 mm dia
20
-
-
... More
od179554/2024_2025 : Supply,Installation, testing and commissioning of 160KVA, 3 phase, 415V Prime D.G set consisting of the following. (CPCB-IV)a) Alternator: 128 KW, 3 phase, 415V, 0.8.p.f, 4 wire 50hz at 1500 - RPM self - excited and self-regulated alternator) Diesel Engine:196.6 BHP at 1500 RPM.The engine shall generally confirm to IS 10002:1981, BS 5514 DIN6217, ISO 3046 standards. c) Fuel tank d)Miscellaneous materials like Battery, Anti Vibration mountings, residential silencer, Necessary flanges, flexible couplings, fuel connectors, valves etc. CPCB IV approved Acoustic enclosure, water cooled.
1
-
-
... More
od179555/2024_2025 : Supply,Installation, testing and commissioning of 11KV,3ph 630A SF6 insulated extensible type RMU within a metal clad enclosure having degree of protection IP54 with short time rating 35KA for 3 Seconds,independent manual spring charged mechanism, fully rated earth switches with mechanical interlock and provision for pad locking and self powered O/C and E/F relay associated with trip circuit comprising of - 1 nos 630A triple pole (VCB) single break 3 positional ring main switch with independent spring mechanism, fully rated earth switches with provision for earth and test of cable and two insulated cable boxes and cable gland suitable for bottom entry 3 core cable upto 300 Sq mm.1 no 630A triple pole (Isolator) with independent manually charged spring mechanism and fully rated earth switch with provision for cable box and earthing of cable box and suitable for bottom entry and cable gland suitable for bottom entry 3 core cable upto 300 Sq mm.(excluding civil work). (May change according to KSEB requirement)<br>
1
-
-
... More
od179556/2024_2025 : Supply,Installation, testing and commissioning of 11kV-315 KVA indoor USS with following specifications,11KV/433V, 3 phase, vector DYN-11, Copper wound, Cast resin transformer with off circuit tappings from +5% to -10% in steps of 2.5%, changeable on off circuit by tap links provided,with WTI & LV terminals suitable for 2 runs of PVC cable and HV terminals connected to 11KV, 26.3KA, 630A LBS panel with incoming suitable for XLPE cable and output connected to 11KV seal off bushing to the transformer. Type of Terminals a. HV side Connected to LBS Panel b. LV side Cable Box Neutral brought out on LV Side Tapping on HV Side +5% to -10% in steps of 2.5% Changeable by off circuit tap links Impedance at normal Voltage Ratio at 75°C 5% with IS Tolerance Type of Installation- Indoor Type of Insulation -CLASS F
1
-
-
... More
CABLE
-
-
-
... More
od179581/2024_2025 : Supplying of PVC/XLPE insulated and PVC sheathed armored power cable of 11 KV grade of following sizes 3c x300 sq.mm. AL. Armored XLPE insulated cable
20
-
-
... More
od179582/2024_2025 : Supplying of PVC/XLPE insulated and PVC sheathed armored power cable of 11 KV grade of following sizes 3c x150 sq.mm. AL. Armored XLPE insulated cable<br>
25
-
-
... More
od183324/2024_2025 : Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 300 sq mm <br>
2
-
-
... More
od183325/2024_2025 : Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required 150 sq.mm
1
-
-
... More
8.1.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 120 sq. mm and upto 400 sq. mm
13
-
-
... More
8.3.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 120 sq. mm and upto 400 sq. mm
15
-
-
... More
8.4.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing masonry open duct as required.Above 120 sq. mm and upto 400 sq. mm
15
-
-
... More
od183302/2024_2025 : Supplying of PVC/XLPE insulated and PVC sheathed armoured power cable of 1.1 KV grade of following sizes 50 sq.mm. 4 cores Al. Armoured XLPE insulated cable
162
-
-
... More
od183303/2024_2025 : Supplying of PVC/XLPE insulated and PVC sheathed armoured power cable of 1.1 KV grade of following sizes 35 sq.mm. 4 cores Al. Armoured XLPE insulated cable
198
-
-
... More
od183304/2024_2025 : Supplying of PVC/XLPE insulated and PVC sheathed armoured power cable of 1.1 KV grade of following sizes 25 sq.mm. 4 cores Al. Armoured XLPE insulated cable
152
-
-
... More
od183305/2024_2025 : Supplying of PVC/XLPE insulated and PVC sheathed armoured power cable of 1.1 KV grade of following sizes 16 sq.mm. 4 cores Al. Armoured XLPE insulated cable
231
-
-
... More
od183306/2024_2025 : Supplying of PVC/XLPE insulated and PVC sheathed armoured power cable of 1.1 KV grade of following sizes 10 sq.mm. 4 cores Al. Armoured XLPE insulated cable
264
-
-
... More
od183307/2024_2025 : Supplying of PVC/XLPE insulated and PVC sheathed armoured power cable of 1.1 KV grade of following sizes 6 sq.mm. 4 cores Al. Armoured XLPE insulated cable
30
-
-
... More
od183308/2024_2025 : Supplying of PVC/XLPE insulated and PVC sheathed armoured power cable of 1.1 KV grade of following sizes 400 sq.mm. 3.5 cores Al. Armoured XLPE insulated cable
36
-
-
... More
od183309/2024_2025 : Supplying of PVC/XLPE insulated and PVC sheathed armoured power cable of 1.1 KV grade of following sizes 240 sq.mm. 3.5 cores Al. Armoured XLPE insulated cable
42
-
-
... More
od183310/2024_2025 : Supplying of PVC/XLPE insulated and PVC sheathed armoured power cable of 1.1 KV grade of following sizes 185 sq.mm. 3.5 cores Al. Armoured XLPE insulated cable<br>
20
-
-
... More
od183311/2024_2025 : Supplying of PVC/XLPE insulated and PVC sheathed armoured power cable of 1.1 KV grade of following sizes 150 sq.mm. 3.5 cores Al. Armoured XLPE insulated cable
105
-
-
... More
od183312/2024_2025 : Supplying of PVC/XLPE insulated and PVC sheathed armoured power cable of 1.1 KV grade of following sizes 120 sq.mm. 3.5 cores Al. Armoured XLPE insulated cable<br>
20
-
-
... More
od183313/2024_2025 : Supplying of PVC/XLPE insulated and PVC sheathed armoured power cable of 1.1 KV grade of following sizes 95 sq.mm. 3.5 cores Al. Armoured XLPE insulated cable<br>
35
-
-
... More
od183314/2024_2025 : <br>Supplying of PVC/XLPE insulated and PVC sheathed armoured power cable of 1.1 KV grade of following sizes 70 sq.mm. 3.5 cores Al. Armoured XLPE insulated cable<br>
52
-
-
... More
od183315/2024_2025 : Supplying of PVC/XLPE insulated and PVC sheathed armoured power cable of 1.1 KV grade of following sizes 2.5 sq.mm Cu Armoured XLPE insulated cable
88
-
-
... More
od183316/2024_2025 : Supplying of PVC/XLPE insulated and PVC sheathed armoured power cable of 1.1 KV grade of following sizes 10 sq.mm. 2 cores Al. Conductor
400
-
-
... More
od183317/2024_2025 : Supplying of PVC/XLPE insulated and PVC sheathed armoured power cable of 1.1 KV grade of following sizes 6 sq.mm. 2 cores Al. Conductor
408
-
-
... More
od183318/2024_2025 : Supplying of PVC/XLPE insulated and PVC sheathed armoured power cable of 1.1 KV grade of following sizes 50sq.mm. 3 cores Al. Armoured XLPE insulated cable
22
-
-
... More
od183319/2024_2025 : Supplying of PVC/XLPE insulated and PVC sheathed armoured power cable of 1.1 KV grade of following sizes 35 sq.mm. 3 cores Al. Armoured XLPE insulated cable
16
-
-
... More
od183320/2024_2025 : Supplying of PVC/XLPE insulated and PVC sheathed armoured power cable of 1.1 KV grade of following sizes 10 sq.mm. 3 cores Al. Armoured XLPE insulated cable
32
-
-
... More
od183321/2024_2025 : Supplying of PVC/XLPE insulated and PVC sheathed armoured power cable of 1.1 KV grade of following sizes 6 sq.mm. 3 cores Al. Armoured XLPE insulated cable
16
-
-
... More
od183322/2024_2025 : Supplying of PVC/XLPE insulated and PVC sheathed armoured power cable of 1.1 KV grade of following sizes 4 sq.mm. 3 cores Al. Armoured XLPE insulated cable
36
-
-
... More
7.1.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. mm
214
-
-
... More
7.1.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 35 sq. mm and upto 95 sq. mm
102
-
-
... More
7.1.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 95 sq. mm and upto 185 sq. mm
38
-
-
... More
7.1.4 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 185 sq. mm and upto 400 sq. mm
23
-
-
... More
7.8.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
757
-
-
... More
7.8.2 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
591
-
-
... More
7.8.3 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
214
-
-
... More
7.8.4 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)
78
-
-
... More
9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)
4
-
-
... More
9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)
18
-
-
... More
9.1.34 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm)
4
-
-
... More
9.1.35 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 35 sq. mm (32mm)
8
-
-
... More
9.1.36 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 50 sq. mm (35mm)
12
-
-
... More
9.1.1 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm)
2
-
-
... More
9.1.2 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 10 sq. mm (19mm)
16
-
-
... More
9.1.7 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 10 sq. mm (22mm)
2
-
-
... More
9.1.10 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 35 sq. mm (28mm)
2
-
-
... More
9.1.11 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 50 sq. mm (32mm)
2
-
-
... More
9.1.23 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm)
2
-
-
... More
9.1.24 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 95 sq. mm (45mm)
10
-
-
... More
9.1.25 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 120 sq. mm (45mm)
2
-
-
... More
9.1.26 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 150 sq. mm (50mm)
2
-
-
... More
9.1.27 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)
2
-
-
... More
9.1.29 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 240 sq. mm (62mm)
2
-
-
... More
9.1.31 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 400 sq. mm (82mm)
6
-
-
... More
od185430/2024_2025 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2CX 4 sq. mm (25mm)
12
-
-
... More
od185431/2024_2025 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 CX 4 sq. mm (25mm)<br>
2
-
-
... More
od185432/2024_2025 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 CX 6 sq. mm (25mm)
4
-
-
... More
od186855/2024_2025 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3 CX 6 sq. mm (25mm)<br>
2
-
-
... More
PANEL
-
-
-
... More
od183327/2024_2025 : METER PANEL -Supply installation testing and commissioning of 125A,LT wall mounted type, dust and vermin proof, free standing / wall mounting cubical type construction, made out 16SWG CRCA sheet painted with approved colour and of 2mm thick for frame work and covers, 3mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, complete with Aluminium/copper bus bars as below, inter-connection with copper conductor wires / aluminium strips, neutral links, earth bus etc. including control wiring with 1.5sqmm. & 2.5sqmm. PVC insulated FRLS copper conductor single core cable for voltage & current respectively, cable alleys, cable gland plates in two half, etc. necessary metering protections & indications and mounted with the following switch gears etc. complete as required and after decreasing prickling, phosphating etc with cable gland plate on top, with provision for sealing by KSEB consisting of the following ,(a) Incomer : 1.125A TPN ISOLATOR - 1 No. (b) Bus bar: 125A Aluminium bus bar TPN Aluminium bus bar with heat shrinkable insulation and SMC supports -1set , (c) Outgoing: 1. 240V, 1phase, Cl 1.0, 40A, Digital Energy meter (tested and sealed by KSEB) -5 Nos,2. 415V, 3phase, Cl 1.0, 40A, Digital Energy meter (tested and sealed by KSEB) -3 Nos , 3. 32A DP MCB - 5 Nos, 4. 32A FP MCB - 3 Nos,32A Bakelite fuse carrier & bases with 32A HRC Fuses : 1. For cut outfuse - 5 sets (1 nos.), 2. For cut outfuse - 3 sets (3 nos.), Earth bus :25 x 3 mm Copper.
3
-
-
... More
od183328/2024_2025 : METER PANEL Supply installation testing and commissioning of 125A,LT wall mounted type, dust and vermin proof, free standing / wall mounting cubical type construction, made out 16SWG CRCA sheet painted with approved colour and of 2mm thick for frame work and covers, 3mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, complete with Aluminium/copper bus bars as below, inter-connection with copper conductor wires / aluminium strips, neutral links, earth bus etc. including control wiring with 1.5sqmm. & 2.5sqmm. PVC insulated FRLS copper conductor single core cable for voltage & current respectively, cable alleys, cable gland plates in two half, etc. necessary metering protections & indications and mounted with the following switch gears etc. complete as required and after decreasing prickling, phosphating etc with cable gland plate on top, with provision for sealing by KSEB consisting of the following ,(a) Incomer : 1.125A TPN ISOLATOR - 1 No. (b) Bus bar: 125A Aluminium bus bar TPN Aluminium bus bar with heat shrinkable insulation and SMC supports -1set , (c) Outgoing: 1. 240V, 1phase, Cl 1.0, 40A, Digital Energy meter (tested and sealed by KSEB) -12 Nos,2. 32A DP MCB - 12 Nos ,32A Bakelite fuse carrier & bases with 32A HRC Fuses : 1. For cut outfuse - 12 sets (1 nos.)Earth bus : 25 x 3 mm Copper
3
-
-
... More
od183329/2024_2025 : LIFT Supply installation testing and commissioning of 100A,LT wall mounted type, dust and vermin proof, free standing / wall mounting cubical type construction, made out 16SWG CRCA sheet painted with approved colour and of 2mm thick for frame work and covers, 3mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, complete with Aluminium/copper bus bars as below, inter-connection with copper conductor wires / aluminium strips, neutral links, earth bus etc. including control wiring with 1.5sqmm. & 2.5sqmm. PVC insulated FRLS copper conductor single core cable for voltage & current respectively, cable alleys, cable gland plates in two half, etc. necessary metering protections & indications and mounted with the following switch gears etc. complete as required and after decreasing prickling, phosphating etc consisting of the following (a) Incomer : 1.100A 4P ISOLATOR - 1 No., 1.100A 4P ISOLATOR - 1 No. , Metering: Incomer: Multi Function meter (A,V,F,PF, kWH, kVA)-1set and metering CTs 160/5A, Class 1, 15VA-3set and 2A Cut out fuses-1set., (b) Bus bar: 100A Aluminium bus bar. (c) Outgoing: 1.50A TPN MCB-3 No. 32A Bakelite fuse carrier & bases with 2A HRC Fuses : 1. For Indication Lamps at the incomer - 1 sets (3 nos.) Earth bus : 25 x 3 mm Copper.<br>
1
-
-
... More
od183330/2024_2025 : UPS Supply installation testing and commissioning of 160A,LT floor mounted type, dust and vermin proof, free standing / wall mounting cubical type construction, made out 16SWG CRCA sheet painted with approved colour and of 2mm thick for frame work and covers, 3mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, complete with Aluminium/copper bus bars as below, inter-connection with copper conductor wires / aluminium strips, neutral links, earth bus etc. including control wiring with 1.5sqmm. & 2.5sqmm. PVC insulated FRLS copper conductor single core cable for voltage & current respectively, cable alleys, cable gland plates in two half, etc. necessary metering protections & indications and mounted with the following switch gears etc. complete as required and after decreasing prickling, phosphating etc consisting of the following :- (a) Incomer : 1. 63A TPN 10kA MCB ISOLATOR - 1 Nos, 2. LED type R,Y,B coloured indication lamps on the incoming side - 1 No. (b) Bus bar: 63A Aluminium bus bar. (c) Outgoing: 1. 32A DP MCB - 4 Nos32A Bakelite fuse carrier & bases with 2A HRC Fuses :1. For Indication Lamps at the incomer - 1 sets (3 nos.), Earth bus :25 x 3 mm Copper.
1
-
-
... More
od183331/2024_2025 : RSB -Supply installation testing and commissioning of 100 A,LT floor mounted type, dust and vermin proof, free standing / wall mounting cubical type construction, made out 16SWG CRCA sheet painted with approved colour and of 2mm thick for frame work and covers, 3mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, complete with Aluminium/copper bus bars as below, inter-connection with copper conductor wires / aluminium strips, neutral links, earth bus etc. including control wiring with 1.5sqmm. & 2.5sqmm. PVC insulated FRLS copper conductor single core cable for voltage & current respectively, cable alleys, cable gland plates in two half, etc. necessary metering protections & indications and mounted with the following switch gears etc. complete as required and after decreasing prickling, phosphating etc consisting of the following: (a) Incomer : 1. 100A, FPManual Changeover switch - 1 No.2. LED type R,Y,B coloured indication lamps on the incoming side - 2 Sets. (b) Bus bar: 100A Aluminium bus bar. (c) Outgoing: 1. 32A TPN MCB with Thermal Magnetic Release- 6 Nos, 32A Bakelite fuse carrier & bases with 2A HRC Fuses :1. For Indication Lamps at the incomer - 1 sets (3 nos.) ,Earth bus :25 x 3 mm Copper.
1
-
-
... More
od183332/2024_2025 : HVAC -Supply installation testing and commissioning of 100A,LT floor mounted type, dust and vermin proof, free standing / wall mounting cubical type construction, made out 16SWG CRCA sheet painted with approved colour and of 2mm thick for frame work and covers, 3mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, complete with Aluminium/copper bus bars as below, inter-connection with copper conductor wires / aluminium strips, neutral links, earth bus etc. including control wiring with 1.5sqmm. & 2.5sqmm. PVC insulated FRLS copper conductor single core cable for voltage & current respectively, cable alleys, cable gland plates in two half, etc. necessary metering protections & indications and mounted with the following switch gears etc. complete as required and after decreasing prickling, phosphating etc consisting of the following: (a) Incomer : 1. 100A, 25kA, FP MCCB - 1 No.2. LED type R,Y,B coloured indication lamps on the incoming side - 1 No. (b) Bus bar: 100A Aluminium bus bar. (c) Outgoing: 1. 40A TPN MCB with Thermal Magnetic Release- 7 Nos ,32A Bakelite fuse carrier & bases with 2A HRC Fuses :1. For Indication Lamps at the incomer - 1 sets (3 nos.), Earth bus : 25 x 3 mm Copper.
1
-
-
... More
od183333/2024_2025 : TSB-Supply installation testing and commissioning of 160A,LT floor mounted type, dust and vermin proof, free standing / wall mounting cubical type construction, made out 16SWG CRCA sheet painted with approved colour and of 2mm thick for frame work and covers, 3mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, complete with Aluminium/copper bus bars as below, inter-connection with copper conductor wires / aluminium strips, neutral links, earth bus etc. including control wiring with 1.5sqmm. & 2.5sqmm. PVC insulated FRLS copper conductor single core cable for voltage & current respectively, cable alleys, cable gland plates in two half, etc. necessary metering protections & indications and mounted with the following switch gears etc. complete as required and after decreasing prickling, phosphating etc consisting of the following: (a) EB Incomer : 1. 160A FP ISOLATOR - 1 No. 2. LED type R,Y,B coloured indication lamps on the incoming side - 1 No.(b) DG Incomer : 1. 160A FP ISOLATOR - 1 No. 2. LED type R,Y,B coloured indication lamps on the incoming side - 1 No. (c) Auto transfer switch : 160A 4P 16kA ATS with Auto/ Manuel control- 1 Nos ,(b) Bus bar: 160A Aluminium bus bar. (c) Outgoing: 1. 100A 16kATPN MCCB - 1 Nos,2. 63A FP MCB - 4 Nos,3. 32A FP MCB - 2 Nos, (1).Metering: Incomer: Multi Function meter (A,V,F,PF, kWH, kVA)-1set and metering CTs 160/5A, Class 1, 15VA-3set and 2A Cut out fuses-1set,(2) Metering: HVAC feeder: Multi Function meter (A,V,F,PF, kWH, kVA)-1set and metering CTs 100/5A, Class 1, 15VA-3set and 2A Cut out fuses-1set , 32A Bakelite fuse carrier & bases with 2A HRC Fuses : 1. For Indication Lamps at the incomer - 2 sets (2*3 nos.), Earth bus : 25 x 3 mm Copper.
1
-
-
... More
od183334/2024_2025 : PSB-Supply installation testing and commissioning of 100A,LT floor mounted type, dust and vermin proof, free standing cubical type construction, made out 16SWG CRCA sheet painted with approved colour and of 2mm thick for frame work and covers, 3mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, complete with Aluminium/copper bus bars as below, inter-connection with copper conductor wires / aluminium strips, neutral links, earth bus etc. including control wiring with 1.5sqmm. & 2.5sqmm. PVC insulated FRLS copper conductor single core cable for voltage & current respectively, cable alleys, cable gland plates in two half, etc. necessary metering protections & indications and mounted with the following switch gears etc. complete as required and after decreasing prickling, phosphating etc consisting of the following: (a) Incomer : 1. 80A FP ISOLATOR - 1 No. , 2. LED type R,Y,B coloured indication lamps on the incoming side - 1 No., (b) Bus bar: 80A Aluminium bus bar. , (c) Outgoing: 1. 32A DP MCB with Thermal Magnetic Release- 6 Nos , 2. 16A DP MCB with Thermal Magnetic Release- 1 Nos , 3. STAR-DELTA Starter for 5HP motor with ON/OFF indication- 1 Nos , 4. STAR-DELTA Starter for 7.5HP motor with ON/OFF indication- 1 Nos , 32A Bakelite fuse carrier & bases with 2A HRC Fuses : 1. For Indication Lamps at the incomer - 1 sets (3 nos.), Earth bus : 25 x 3 mm Copper.<br>
1
-
-
... More
od183335/2024_2025 : LSB-Supply installation testing and commissioning of 63A,LT floor mounted type, dust and vermin proof, free standing cubical type construction, made out 16SWG CRCA sheet painted with approved colour and of 2mm thick for frame work and covers, 3mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, complete with Aluminium/copper bus bars as below, inter-connection with copper conductor wires / aluminium strips, neutral links, earth bus etc. including control wiring with 1.5sqmm. & 2.5sqmm. PVC insulated FRLS copper conductor single core cable for voltage & current respectively, cable alleys, cable gland plates in two half, etc. necessary metering protections & indications and mounted with the following switch gears etc. complete as required and after decreasing prickling, phosphating etc consisting of the following: (a) Incomer : 1. 63A FP ISOLATOR - 1 No. , 2. LED type R,Y,B coloured indication lamps on the incoming side - 1 No. (b) Bus bar: 63A Aluminium bus bar. (c) Outgoing: 1. 32A DP MCB with Thermal Magnetic Release- 6 Nos 2. 16A DP MCB with Thermal Magnetic Release- 1 Nos 32A Bakelite fuse carrier & bases with 2A HRC Fuses : 1. For Indication Lamps at the incomer - 1 sets (3 nos.) Earth bus : 25 x 3 mm Copper.<br>
1
-
-
... More
od183336/2024_2025 : CSB-Supply installation testing and commissioning of 160A,LT floor mounted type, dust and vermin proof, free standing cubical type panel board , suitable for operation on 415 ±10% volts, 50 Hz AC 3 phase 4 wire system fabricated out of with construction, made out 14SWG CRCA sheet painted with approved colour and of 2mm thick for frame work and covers, 3mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, complete with Aluminium/copper bus bars as below, inter-connection with copper conductor wires / aluminium strips, neutral links, earth bus etc. including control wiring with 1.5sqmm. & 2.5sqmm. PVC insulated FRLS copper conductor single core cable for voltage & current respectively, cable alleys, cable gland plates in two half, etc. necessary metering protections & indications and mounted with the following switch gears etc. complete as required after decreasing prickling, phosphating etc Each MCCB will have variable current setting for over current, front extended lockable handle, pad lockable in off position, indication light for ON, shrouding on incomer side, termination shall be suitable for aluminium bus bars. All MCCBs of 250 A and above shall be microprocessor based only. Current density of aluminium and copper busbars shall not be more than 0.80 A per sq.mm. and 1.2A per sq.mm respectively and panel consisting of the following (a) EB Incomer : 1.160A FP ISOLATOR , 2. LED type R,Y,B coloured indication lamps on the incoming side - 1 Nos , (b) Bus bar: 160A Aluminium bus bar. (c) Contactor : 160A FP Contactor-1Nos , Metering: Multi Function meter (A,V,F,PF)-1set and metering CTs 150/5A, Class 1, 15VA-3set and 2A Cut out fuses-1set (d) DG Incomer : 1.160A FP ISOLATOR , 2. LED type R,Y,B coloured indication lamps on the incoming side - 1 Nos (e) Contactor : 160A FP Contactor-1Nos , Metering: Multi Function meter (A,V,F,PF)-1set and metering CTs 150/5A, Class 1, 15VA-3set and 2A Cut out fuses-1set (h) Outgoing: 1. 63A TPN 16kA MCCB with Thermal Magnetic Release- 2 Nos, 2. 80A TPN 16kA MCCB with Thermal Magnetic Release- 2 Nos, 3. 160A TPN ISOLATOR - 1 Nos ,32A Bakelite fuse carrier & bases with 2A HRC Fuses : 1. For Indication Lamps at the incomer - 2 sets (2*3 nos.), Earth bus : 25 x 3 mm Copper.<br>
1
-
-
... More
od183337/2024_2025 : Supply installation testing and commissioning of 630A,LT floor mounted type, dust and vermin proof, free standing cubical type panel board , suitable for operation on 415 ±10% volts, 50 Hz AC 3 phase 4 wire system fabricated out of with construction, made out 14SWG CRCA sheet painted with approved colour and of 2mm thick for frame work and covers, 3mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, complete with Aluminium/copper bus bars as below, inter-connection with copper conductor wires / aluminium strips, neutral links, earth bus etc. including control wiring with 1.5sqmm. & 2.5sqmm. PVC insulated FRLS copper conductor single core cable for voltage & current respectively, cable alleys, cable gland plates in two half, etc. necessary metering protections & indications and mounted with the following switch gears etc. complete as required after decreasing prickling, phosphating etcEach MCCB will have variable current setting for over current, front extended lockable handle, pad lockable in off position, indication light for ON, shrouding on incomer side, termination shall be suitable for aluminium bus bars. All MCCBs of 250 A and above shall be microprocessor based only. Current density of aluminium and copper busbars shall not be more than 0.80 A per sq.mm. and 1.2A per sq.mm respectively and panel consisting of the following (a) EB Incomer:-630A FP 35kA microprocessor based MCCB set at 420A of specified make and having external 3xO/C, S/C & E/F setting facility. Terminal shrouds shall be provided at the incoming and outgoing terminals. - 1 No.(b) Bus bar: 630A Aluminium bus bar. (c) Metering : CT driven kWH LT meter Metering: 3phase, 4Wire, 415V, -/5A, Cl.1.0, KSEB tested and sealed meters - 4Nos (d) Outgoing: 1. 63A TPN 36kA MCCB with Thermal Magnetic Release- 1 Nos 2. 80A TPN 36kA MCCB with Thermal Magnetic Release- 4 Nos,3. 160A TPN MCCB with 36kA Thermal Magnetic Release- 4 Nos Fuse carrier & bases with Fuses :1. 32A Bakelite fuse carrier & bases with 2A HRC Fuses For Metering - 5 sets (5*3 nos.),2. 160A Bakelite fuse carrier & bases with 160A HRC Fuses For cutout - 2 sets (2*3 nos.) 3. 160A Bakelite fuse carrier & bases with 120A HRC Fuses For cutout - 2 sets (2*3 nos.)3. 63A Bakelite fuse carrier & bases with 63A HRC Fuses For cutout - 1 sets (2*3 nos.)4. 160A Bakelite neutral link with carrier-4nos,4. 63A Bakelite neutral link with carrier-1nos, Earth bus 25 x 3 mm copper
1
-
-
... More
EARTHING
-
-
-
... More
od185446/2024_2025 : Supply and clamping 25 x 3 mm tinned Cu. Earth bench of the following lengths on the surface of wall for connecting earth continuity leads at required locations. 30 cm Earth Bench
5
-
-
... More
od185447/2024_2025 : Supply and clamping 25 x 3 mm tinned Cu. Earth bench of the following lengths on the surface of wall for connecting earth continuity leads at required locations. 60 cm Earth Bench
5
-
-
... More
od185448/2024_2025 : Supplying, straightening, shaping, laying under ground / laying on a cable tray / laying in cement concrete trench the following sizes of copper/hot dipped galvanized iron conductor. The work is inclusive of providing clamping with the trays / on the sides of the trenches, making joints whereever required and providing the hardwares and the terminating the hardwares and the termination to the equipment / earthing station / etc. COPPER CONDUCTORS No.10 SWG Cu
1500
-
-
... More
od185449/2024_2025 : Supplying, straightening, shaping, laying under ground / laying on a cable tray / laying in cement concrete trench the following sizes of copper/hot dipped galvanized iron conductor. The work is inclusive of providing clamping with the trays / on the sides of the trenches, making joints whereever required and providing the hardwares and the terminating the hardwares and the termination to the equipment / earthing station / etc. COPPER CONDUCTORS 25X3mm copper flat
256
-
-
... More
od185451/2024_2025 : Supplying, straightening, shaping, laying under ground / laying on a cable tray / laying in cement concrete trench the following sizes of copper/hot dipped galvanized iron conductor. The work is inclusive of providing clamping with the trays / on the sides of the trenches, making joints whereever required and providing the hardwares and the terminating the hardwares and the termination to the equipment / earthing station / etc. GI CONDUCTORS, 50X6mm GI
250
-
-
... More
5.9 : Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth
electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
500
-
-
... More
5.2 : Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing
masonry enclosure with cover plate having locking arrangement and watering pipe etc. with
charcoal/ coke and salt as required
2
-
-
... More
5.5 : Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as required.
3
-
-
... More
od185453/2024_2025 : Supply and providing plate earthing as per I.S 3043 with 1200x1200x12 mm CI earth plate with required length of 38.1 mm dia. 'B' class G.I watering pipe extending to the middle of the plate and clamped to the plate with minimum 2 Nos. GI clamps of size 50x6 mm flat with 50x10 mm, GI bolt and nuts including drilling necessary holes, providing G.I funnel with weld mesh, fixing GI strip of size 50 x 6mm with minimum length of 30 cm clamped with 50x6 mm GI flat using 50x10 mm GI bolt and nut as test joint to the watering pipe, fixing 2 Nos. G.I strip of size 50x6 mm from test joint to earth plate, filling with homogeneous mixture of charcoal, common salt and river sand around the earth plate, upto a distance of 15 cm on either side, filling the rest of the portion with excavated soil including watering and ramming, providing brick work (20cm masonry) at the top in 1:6 cement mortar, plastering inside and top of the man hole with 12mm thick 1:6 cement mortar and providing 45 cm x 45 cm 1:2:4 RCC slab 50 mm thick as covering at the top
11
-
-
... More
CABLE TRAY
-
-
-
... More
4.6.2 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.150 mm width X 50 mm depth X 1.6 mm thickness
16
-
-
... More
od186856/2024_2025 : Supplying and installing following size of perforated painted with powder coating Hot dip galvanized Iron cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors,suspended from the ceiling with GI. suspenders including bolts & nuts, painting suspenders etc. as required. (all components shall be of Hot dip galvanized) 200 mm width X 50 mm depth X 1 mm thickness
90
-
-
... More
od186857/2024_2025 : Supplying and installing following size of perforated painted with powder coating Hot dip galvanized Iron cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors,suspended from the ceiling with GI. suspenders including bolts & nuts, painting suspenders etc. as required. (all components shall be of Hot dip galvanized) 250 mm width X 50 mm depth X 1 mm thickness
60
-
-
... More
4.6.4 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.300 mm width X 50 mm depth X 1.6 mm thickness
195
-
-
... More
4.6.10 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.450 mm width X 62.5 mm depth X 2.0 mm thicknessICDDescriptionUnit
285
-
-
... More
4.6.11 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.600 mm width X 62.5 mm depth X 2.0 mm thickness
380
-
-
... More
4.7.2 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends " ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.150 mm width X 50 mm depth X 1.6 mm thickness
8
-
-
... More
4.7.8 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends " ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.300 mm width X 62.5 mm depth X 2.0 mm thickness
6
-
-
... More
4.7.10 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends " ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.450 mm width X 62.5 mm depth X 2.0 mm thickness
4
-
-
... More
4.7.11 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends " ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.600 mm width X 62.5 mm depth X 2.0 mm thickness
45
-
-
... More
SAFETY
-
-
-
... More
od185454/2024_2025 : One Tool kit comprising 1 set of flat spanner (Taparia / Stanley/Jalan ), 1 set of box spanner, 1 no. Hacksaw frame with 10 no. blades, 1 no. large, medium, small screw drivers, 1 no. insulated plier, 1 no. nose plier, 1 no. hand crimping tool upto 16 sq.mm, 1 no. digital multimeter, 1 no. test lamp and 1 no. tester, Screw driver set for all types of screw heads also to be provided,
1
-
-
... More
od185455/2024_2025 : Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. Capacity conforming to IS: 15683-2006 Complete erected with necessary clamp made front 50x6 mm. M. S. flat with nut & bolts grouted in wall complete.
3
-
-
... More
od185456/2024_2025 : Supply and providing ISI grade rubber mat (Synthetic) as per inspectorate standard., 1M x 2.5mm thick, suitable for 1.1 KV , fire retardant,no effect of acids, alkalies and transformer oils, moisture proof, high tensile strength and texture finish / cloth impression (Anti slip , marking on top) .
4
-
-
... More
od185457/2024_2025 : Supplying and erection of the following equipment at suitable place in the sub-station building as required. Shock treatment chart duly mounted on a wooden frame with glass on front as required in 2 languages Malayalam & English).
1
-
-
... More
od185458/2024_2025 : Supplying and erection of the following equipment at suitable place in the sub-station building as required. First aid box
1
-
-
... More
od185459/2024_2025 : Supplying and erection of the following equipment at suitable place in the sub-station building as required. Providing and fixing fire bucket 9 letter with stand
5
-
-
... More
ELV_THEATER
-
-
-
... More
od185800/2024_2025 : DIGITAL CINEMA PROJECTOR Christie® CineLife+™ CP4420-Xe cinema projectors deliver long-term brightness and excellent image performance with the lowest operating costs in their brightness class. Brightness-Up to 22,000 lumens; Cinema screen size-70' screen*; Contrast ratio-2000:1 full field on/off; Color gamut / number of colors-35.2 trillion; Digital micromirror device-1.4" Enhanced 4K 3-chip DMD DLP Cinema®; Resolution-4K (4096 x 2160) Supported frame rates - 2D 2K 120 fps, 3D 2K 60 fps, 2D 4K 120 fps, 3D 4K 60 fpsLamp- 3.0kW (CDXL-30SD) 003-001165-XXLens mount configuration -Fully motorized Intelligent Lens System (ILS™)Power input requirementsMain Input: 200-240VAC @ 50-60Hz 21A maxUPS input: 100-240VAC @ 50-60Hz 4A maxPower consumption: 4200W** max,Lamp power supply,3.3 kW low-ripple switch mode power supply
1
-
-
... More
od188368/2024_2025 : Supply, Installation, Testing and Commissioning of SITC of Dolby atmos 38 channel surround sound system with speakers 5nos subwoofers, amplifiers, servers, with speaker mounting clamps with floowing items SITC of JBL 4253 3-way cinema screen speaker, symmetrical 90° x 50° coverage and minimum distortion, Dual 15-inch transducers deliver higher output, superior bass extension, 800W rated power, Frequency response: 50 Hz–18 kHz (-10 dB) (4π) ,
3
-
-
... More
od188369/2024_2025 : Supply, Installation, Testing and Commissioning of SITC of Dolby atmos 38 channel surround sound system with speakers 5nos subwoofers, amplifiers, servers, with speaker mounting clamps with the following items SITC of Crown XLi 3500 Two-channel, 1350W Power Amplifier<br>
4
-
-
... More
od188370/2024_2025 : Supply, Installation, Testing and Commissioning of SITC of Dolby atmos 38 channel surround sound system with speakers 5nos subwoofers, amplifiers, servers, with speaker mounting clamps with following items SITC of Cinema Surround Loudspeaker -9300 Cinema Surround 2-Way Passive 1" HF, 10" Woofer (2" VC), 250 Watt Power handling capability, Uniform asymmetric 60 degree vertical coverage and 110 degree horizontal coverage
20
-
-
... More
od188371/2024_2025 : Supply, Installation, Testing and Commissioning of SITC of Dolby atmos 38 channel surround sound system with speakers 5nos subwoofers, amplifiers, servers, with speaker mounting clamps with following itemsSITC of High Power Cinema Surround Loudspeaker- 9310 Cinema Surround 2-Way Passive 1" HF, 10" Woofer (2" VC) , 350 Watt Power handling capability, Uniform asymmetric 60 degree vertical coverage and 110 degree horizontal coverage
12
-
-
... More
od188372/2024_2025 : Supply, Installation, Testing and Commissioning of SITC of Dolby atmos 38 channel surround sound system with speakers 5nos subwoofers, amplifiers, servers, with speaker mounting clamps with following items SITC of 4642A Dual 460 mm (18 in.) Subwoofer System, 1200 Watts Continuous Pink Noise, 2400 Watts Continuous Program Power Handling, Usable response to 22 Hz (-10 dB, no EQ), flat to 22 Hz (-3 dB) with External EQ, 2241H VGCTM Vented Gap Cooled Drivers – High Sensitivity – Low Power Compression – High Maximum-SPL Capability – Low 2nd and 3rd Harmonic – Distortion – Symmetrical Field Geometry SFGTM – Magnet Structure – Long Excursion Capability
2
-
-
... More
od190445/2024_2025 : Dolby atmos user license fee
1
-
-
... More
od190446/2024_2025 : SITC of Dolby atmos 38 channel surround sound system with speakers 5nos subwoofers, amplifiers, servers, with speaker mounting clamps with floowing items SITC of Customized mounting racks for speakers, sub woofers
32
-
-
... More
od190447/2024_2025 : SITC of Dolby atmos 38 channel surround sound system with speakers 5nos subwoofers, amplifiers, servers, with speaker mounting clamps with floowing items SITC of 32U rack for mouning amplifiers and processors
2
-
-
... More
od190448/2024_2025 : SITC of Dolby atmos 38 channel surround sound system with speakers 5nos subwoofers, amplifiers, servers, with speaker mounting clamps with floowing items SITC of Dolby Atmos Connect Interface DAC3202,
1
-
-
... More
od190449/2024_2025 : SITC of Dolby atmos 38 channel surround sound system with speakers 5nos subwoofers, amplifiers, servers, with speaker mounting clamps with floowing items SITC of Dolby Atmos® Cinema Processor CP950A
1
-
-
... More
od190450/2024_2025 : SITC of Dolby atmos 38 channel surround sound system with speakers 5nos subwoofers, amplifiers, servers, with speaker mounting clamps with floowing items SITC of XLi 2500 Two-channel, 750W @ 4Ω Power Amplifier
12
-
-
... More
od190451/2024_2025 : SITC of Dolby atmos 38 channel surround sound system with speakers 5nos subwoofers, amplifiers, servers, with speaker mounting clamps with floowing items SITC of Crown Audio DSi 2.0 Series MA4 700W 4-Channel Amplifier for JBL Cinema Loudspeaker
3
-
-
... More
NET WORK
-
-
-
... More
od185883/2024_2025 : Supply, Installation, Testing and Commissioning of 4""U 550Wx600mm Depth wall mount rack with Front Glass Door With Lock & Key,Side Panels, Horizontal PDU 6X5Amps - 1 No, Cooling Fan - 1 No, Hardware Screws and all other required accessories (forSecond floor) MASS RACK
2
-
-
... More
od185884/2024_2025 : Supply, Installation, Testing & Commissioning of 9U Network Rack with below specifications as minimum and all the necessary accessories - Height - 9U - Dimensions - 600 x 600- Fan Units with 4 Fans- PDU 6 point - 1 Nos's - Mounting Hardware Kit (1 lot) - Tray - Front glass doors and back steel door and side panels<br>
1
-
-
... More
od185885/2024_2025 : Supply, Installation, Testing & Commissioning of 15U Network Rack with below specifications as minimum and all the necessary accessory - Height - 15U - Dimensions - 600 x 600- Fan Units with 4 Fans - PDU 6 point - 1 Nos's - Mounting Hardware Kit (1 lot) - Tray - Front glass doors and back steel door and side panels
1
-
-
... More
od185886/2024_2025 : Supply, Installation, Testing and Commissioning of 42, U 550Wx600mm Depth wall mount rack with Front Glass Door With Lock & Key,Side Panels, Horizontal PDU 6X5Amps - 1 No, Cooling Fan - 1 No, Hardware Screws and all other required accessories (forProjector room) MASS RACK
2
-
-
... More
1.18.2 : Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.2 Pair
600
-
-
... More
1.53.1 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable
300
-
-
... More
1.53.2 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required2 run of Cable
200
-
-
... More
1.53.3 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required3 run of Cable
100
-
-
... More
IP SURVEILLANCE
-
-
-
... More
od185915/2024_2025 : Supply, installation & commissioning of Camera Box
47
-
-
... More
od185916/2024_2025 : Patch Cable - Supply, Installation, Testing and Commissioning of CAT6 LSZH Patch Cord with molded strain relief boot & 50u gold plated contact pins - 1 Meter etc. of approved make as required for complete installation.
48
-
-
... More
od185917/2024_2025 : Supply, Installation, Testing of CAT6 Patch/Jack Panel, 24-port, Modular, PCB based, Unshielded Twisted Pair, Category 6, TIA / EIA 568-C.2 and ISO/IEC 11801
3
-
-
... More
od185918/2024_2025 : Supply, Installation, Testing and Commissioning of 24 PORT POE Switch. Ports 24 x 10/100/ 1000 + 4 x gigabit SFP .Layer 2 switching, dhcp, vlan support, igmp snooping, syslog, dos attack prevention, port mirroring, diffserv, weighted round robin (WRR) queuing, broadcast storm control, ipv6, multicast storm control, unicast storm control, firmware upgradable, spanning tree protocol (STP) support, rapid spanning tree protocol (RSTP) support, power AC 120/230 v (50/60 Hz) DAHUA DH-PFS3228-24GT-240
2
-
-
... More
od185919/2024_2025 : Supply, Installation, Testing & Commissioning of Storage capacity to accommodate 45 days storage at 15 fps and 4 CIF resolution -- 4TB AV hard disk 7200 rpm for data recording in NVR
4
-
-
... More
od185920/2024_2025 : Supply, Installation, Testing & Commissioning of Storage capacity to accommodate 45 days storage at 15 fps and 4 CIF resolution -- 6TB AV hard disk 7200 rpm for data recording in NVR
2
-
-
... More
od185921/2024_2025 : Supply, installation, testing and Commissioning of 16 Ch Embedded Network Video Recorder with 4 HDD Bays Supports 4K Cameras, HDMI, VGA. Two-way Audio Input: 1-ch, 3.5mm. IP Video Input: 16-Ch (Upgradable to 16 Channels).Incoming Bandwidth: 160Mbps. Outgoing Bandwidth: 160Mbps. HDMI Output. VGA Output. Audio Output. Compression:H.265+, H.265, H.264, MJPEG. Recording Resolution: 8MP/6MP/5MP/4MP/3MP/1080P. Network: 2×RJ45 self-adaptive 10/100/1000 Mbps network interfaces. 4 SATA interface. Up to 10TB for each HDD. 100~240V AC.support all channel Audio
1
-
-
... More
od185922/2024_2025 : Supply & installation of 32 Channel embedded Linux Network Video Recorder support 16 MP. Smart H.265+/H.265/Smart H.264+/H.264/MJPEG decoding format. Access, storage or forwarding at 256 Mbps (180 Mbps when AI function enabled). Max. decoding capability: 16 × 1080p@30 fps. Supports adaptive decoding. AI by NVR: 1-channel face detection and recognition; 2-channel perimeter protection; up to 10 face databases and 20,000 face images; 4-channel SMD Plus. AI by Camera: Face detection and recognition, perimeter protection; SMD Plus; people counting; stereo analysis; heat map. Connected to the third-party network cameras.Security baseline 2.3.
1
-
-
... More
od185923/2024_2025 : Supply, Installation,testing and commissioning of outdoor 2MP IR IP H.265 Compact Bullet camera. 1/2.9"", 2.0 Megapixel,Progressive scan, CMOS. 2.8/3.6 mm Fixed Lens. Angle of View (H): 97.4°. IR-cut filter with auto switch (ICR).Auto/Manual, 1~1/100000 s. Auto/Manual. IR Range Up to 30M. ≥52dB. Digital Defog. 2D/3D DNR. DWDR.Max.Resolution: 1920×1080. Supported HLC/BLC. Up to 3 OSDs. Motion Detection. H.265+, H.265, H.264, MJPEG Video Compression. IP67. 10/100MBase-TXEthernet. With Audio
13
-
-
... More
od185924/2024_2025 : Supply, Installation,testing and commissioning of indoor 4MP IR IP H.265 Compact Bullet camera. 1/2.9"", 2.0 Megapixel,Progressive scan, CMOS. 2.8/3.6 mm Fixed Lens. Angle of View (H): 97.4°. IR-cut filter with auto switch (ICR).Auto/Manual, 1~1/100000 s. Auto/Manual. IR Range Up to 30M. ≥52dB. Digital Defog. 2D/3D DNR. DWDR.Max.Resolution: 1920×1080. Supported HLC/BLC. Up to 3 OSDs. Motion Detection. H.265+, H.265, H.264, MJPEG Video Compression. IP67. 10/100MBase-TXEthernet. With Audio
4
-
-
... More
od185925/2024_2025 : Supply, Installation,testing and commissioning of indoor 2MP IR IP H.265 Compact Dome camera. 1/2.9"", 2.0 Megapixel,Progressive scan, CMOS. 2.8/3.6 mm Fixed Lens. Angle of View (H): 97.4°. IR-cut filter with auto switch (ICR).Auto/Manual, 1~1/100000 s. Auto/Manual. IR Range Up to 30M. ≥52dB. Digital Defog. 2D/3D DNR. DWDR.Max.Resolution: 1920×1080. Supported HLC/BLC. Up to 3 OSDs. Motion Detection. H.265+, H.265, H.264, MJPEG Video Compression. IP67. 10/100MBase-TXEthernet. With Audio
30
-
-
... More
PUBLIC ADDRESS SYSTEM
-
-
-
... More
od186012/2024_2025 : Supply and installation of Wired goosneck Microphone. with MULTI Tone Chime. Single zone desktop paging microphone .
1
-
-
... More
od186013/2024_2025 : Supply, Installation,testing & commissioning of 250 W PA Mixer Amplifier. 6 Mic & 2 Aux Input. Built-in MP3 player with USB reader and remote control. Line Output for connecting to a Booster Amplifier. Active Bass & Treble controls.
1
-
-
... More
od186014/2024_2025 : Supply, Installation, Testing & Commissioning of Dual cone 6.5 in-Box loudspeaker. 100V/6Watts & 8 Ω/15Watts , Freq. 70Hz - 20KHz, White with all accessories
34
-
-
... More
LIGHTNING PROTECTION
-
-
-
... More
od186027/2024_2025 : Providing and fixing of maintenance free Earthing system comprises of molecularly bonded copper of 99.9% purity on low carbon steel of min 3048mm length (10 feet), having a diameter of 20mm with copper bonding thickness of 250 microns as per UL 467. The Rod has to be either continuous or with self-coupling peg & bore arrangement with fault current withstand capability of 30 KA rms value for 1 second and I peak of 76 KA. The rod must be having corrosion test, peel off test for uniform coating, 180 degree bend test with out peeloff of copper bonding. Exothermic welded Clamp for clamping as suggested as per NBC 2016. Ordinary Stainless steel/Copper alloy universal clamps are not recommended. For self coupling peg & bore arrangement rod needs Impact point on the bottom rod for easy insertion. Earth enhancing mineral compound is used for improving the soil conductivity. The material shall be mineral inert to sub soil and shall not pollute the environment and non corrosive to earth rod. The material should have a resistivity less than 0.2 Ωm. It should be free from hazardous substances. The mineral compound is required to have minimum 17.5 Kg of the total composite. The compound should be chemically inert and needs to submit Govt approved Indian labs test certificate. FRP Earth electrode inspection chamber FRP Earth electrode inspection chamber with weight bearing capacity of 60KN. The dimension shall be 290mmx 290mmx 209mm. Govt approved Indian labs test certificate required.
2
-
-
... More
od186028/2024_2025 : Installation of Exothermic Weld Joints for 10mm round copper bonded steel conductor having 100 microns as per IS/IEC 62305. Each under ground joints has to be wrapped with petrolatum- coated chemical fibre fabric having 1.1mm thick and width 50mm. Govt approved Indian labs test certificate required.
9
-
-
... More
od186029/2024_2025 : Providing and laying copper coated steel solid round conductor 10mm diameter from earth electrode directly in ground as required. copper coated steel, high corrosion resistant. Meets the requirement of (IS/IEC 62305) copper coating thickness of 100microns Should be tested and use exclusively for lightning protection earthing system and ring equipotential bonding. After test link needs to be routed inside Heavy duty conduit to avoid touch potential till ground level. Govt approved Indian labs test certificate required.
100
-
-
... More
od186030/2024_2025 : Providing and fixing of Stainless Steel Test Joint suitable with suitable Outdoor Enclosure: For 8mm dia solid round aluminium conductor & 10mm dia copper coated solid steel round conductor having 100 microns of copper bonding. Conforms to the requirements according to (IS/IEC 62305).The enclosure should be outdoor glass-fibre reinforced polycarbonate opaque having minimum inner dimension of 75mm x 75 mm x 50 mm. The test link has to be straight and needs minimum 4 mounting screws for strong joints. Inspection of bimetallic corrosion at site required. Seperation of 8mm Aluminium & 10mm Copper bonded steel is required for future inspection and contractor has to make sure both conductors should not touch eachg other to avoid bimetallic corrosion. Single bolt joints are not permitted. Govt approved Indian labs test certificate required.
15
-
-
... More
od186031/2024_2025 : Providing and fixing of Cross Connector/T Connector/Folding Clamp/Clamping Shoe/ Expansion Piece: to route vertical down conductor /mesh formation made of Aluminium Ferrule using screw free joints. Folding Clamp/Clamping Shoe for metal panels (up to 20mm thickness of the metal frame):Folding clamp/clamping shoe for metal frame thickness up to 20mm, made of stainless steel SS 304/316 grade , conforms to the requirements according to (IS/IEC 62305). Expansion piece with connector: For equalising temperature related length changes. Necessary on conductors length at every 20 meters horizontally. Using round conductor 8mm aluminium conductor with straight Connector: using Aluminium Ferrule. Quick installation using crimp joints. Conforms to the requirements according to (IS/IEC 62305). Make sure all joints are strong and will be inspected at site. Galvanised Iron joints are not permitted to avoid risk of corrosion. Single bolt joints are not permitted to avoid risk of faulty loose joints and reduce risk of flash over. Govt approved Indian labs test certificate required.
23
-
-
... More
od186032/2024_2025 : Providing & fixing of 8mm solid aluminium round conductor with necessary holders @ required interval as specified below: Meets the requirement of (IS/IEC 62305) : semi-hard (EAlMgSiO5) with 50 sq.mm cross sectional area. Govt approved Indian labs test certificate required Conductor with Terrace Conductor Fibre Reinforce Concrete holder @ every 0.75 meters
12
-
-
... More
od186033/2024_2025 : Providing & fixing of 8mm solid aluminium round conductor with necessary holders @ required interval as specified below: Meets the requirement of (IS/IEC 62305) : semi-hard (EAlMgSiO5) with 50 sq.mm cross sectional area. Govt approved Indian labs test certificate required Conductor with Down Conductor Holder made of whether resistant plastic holder @ every 0.75 meters.
104
-
-
... More
od186034/2024_2025 : Providing & fixing of 8mm solid aluminium round conductor with necessary holders @ required interval as specified below: Meets the requirement of (IS/IEC 62305) : semi-hard (EAlMgSiO5) with 50 sq.mm cross sectional area. Govt approved Indian labs test certificate required.Conductor with Parapet Holder made of whether resistant plastic holder @ every 0.5 meters.
165
-
-
... More
od186035/2024_2025 : Providing and fixing Fully Solid Vertical Air terminals for wind stability as per IS/IEC -62305 part-3 For 1,2,3, 4 meter air terminal 16mm rod tapered to 10 mm aluminium rod meter rod: For 6, 8 meter 40mm rod tapered to 16mm and then to 10mm Meets the requirement (IS/IEC 62305) Semi-hard (E-AlMgSiO5) Suitable for high wind load. All air terminal must have Interception Tip at the Top of air terminal.Air terminal Joining Clip Stainless Steel SS 304 clamp required to connect horizontal air termination to vertical air termination;Lightning tested for 100 KA 10/350 micro sec waveform. This is required if using 17 KG stone supports.Stainless Steel Wall Clamp or 17 KG stone of 365 mm diameter, high level of stability is required to mount 1,2,3,4 meters. No. of concrete stones/wall clamps depending on wind load needs to be considered. For 6 & 8 meter air terminator mounting: tripod stand or 3 nos & 4 nos respectively wall clamp will be required to withstand heavy wind load. Govt approved Indian labs test certificate required.4 meter air terminal with Interception Tip mounted on Concrete Stone & Stainless Steel Wall Clamp mounting accessories.<br>
1
-
-
... More
od186036/2024_2025 : Providing and fixing Fully Solid Vertical Air terminals for wind stability as per IS/IEC -62305 part-3 For 1,2,3, 4 meter air terminal 16mm rod tapered to 10 mm aluminium rod meter rod: For 6, 8 meter 40mm rod tapered to 16mm and then to 10mm Meets the requirement (IS/IEC 62305) Semi-hard (E-AlMgSiO5) Suitable for high wind load. All air terminal must have Interception Tip at the Top of air terminal.Air terminal Joining Clip Stainless Steel SS 304 clamp required to connect horizontal air termination to vertical air termination;Lightning tested for 100 KA 10/350 micro sec waveform. This is required if using 17 KG stone supports.Stainless Steel Wall Clamp or 17 KG stone of 365 mm diameter, high level of stability is required to mount 1,2,3,4 meters. No. of concrete stones/wall clamps depending on wind load needs to be considered. For 6 & 8 meter air terminator mounting: tripod stand or 3 nos & 4 nos respectively wall clamp will be required to withstand heavy wind load. Govt approved Indian labs test certificate required. 4 meter air terminal with Interception Tip mounted on Stainless Steel Wall Clamp mounting accessories.
2
-
-
... More
od186037/2024_2025 : Providing and fixing Fully Solid Vertical Air terminals for wind stability as per IS/IEC -62305 part-3 For 1,2,3, 4 meter air terminal 16mm rod tapered to 10 mm aluminium rod meter rod: For 6, 8 meter 40mm rod tapered to 16mm and then to 10mm Meets the requirement (IS/IEC 62305) Semi-hard (E-AlMgSiO5) Suitable for high wind load. All air terminal must have Interception Tip at the Top of air terminal.Air terminal Joining Clip Stainless Steel SS 304 clamp required to connect horizontal air termination to vertical air termination;Lightning tested for 100 KA 10/350 micro sec waveform. This is required if using 17 KG stone supports.Stainless Steel Wall Clamp or 17 KG stone of 365 mm diameter, high level of stability is required to mount 1,2,3,4 meters. No. of concrete stones/wall clamps depending on wind load needs to be considered. For 6 & 8 meter air terminator mounting: tripod stand or 3 nos & 4 nos respectively wall clamp will be required to withstand heavy wind load. Govt approved Indian labs test certificate required. 2 meter air terminal with Interception Tip mounted on Stainless Steel Wall Clamp mounting accessories.
1
-
-
... More
SOLAR
-
-
-
... More
od186056/2024_2025 : Supply and installation,testing and commissioning of 40 KW Grid tie inverter with with following specifications • Dual MPPT for optimum generation• Wide Input Voltage Range• >98.2% Inverter Efficiency• In-Built 25 Year Data Storage Capability• Remote Monitoring – free for 25 years• 10.16 cm (4”) LCD display• Detachable cover for easy installation & maintenance• Safety Protection- Anti islanding, Ground Fault monitoring• Anti Reverse Power Controller - zero export (Optional)• IEC Certification - As per MNRE
1
-
-
... More
od186057/2024_2025 : Supply and installation,testing and commissioning 545 Watts MONO PERC, Half Cut panels with following specifications• Extreme weather resilience• Windspeed - 2400 Pa, Snowload - 5400 Pa• Highly reliable anti-reflective coated glass• 1500 Vdc• PID resistant
72
-
-
... More
od186859/2024_2025 : Metering Panel + AC Panel :- Supply, installation, Testing and Commissioning of 125 A dust, damp and vermin proof free floor /wall mounted, Indoor type factory built sheet steel enclosed compartmentalized cubicle panel board made out 14SWG CRCA sheet painted with approved colour after decreasing prickling, phosphating, suitable for operation on 415 ±10% volts, 50 Hz AC 3 phase 4 wire system fabricated out of with CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, complete with Aluminium/copper bus bars as below, inter-connection with copper conductor wires / aluminium strips, neutral links, earth bus etc. including control wiring with 1.5sqmm. & 2.5sqmm. PVC insulated FRLS copper conductor single core cable for voltage & current respectively, cable alleys, cable gland plates in two half, etc. necessary metering protections & indications and mounted with the following switch gears etc. complete as required.Each MCCB will have variable current setting for over current, front extended lockable handle, pad lockable in off position, indication light for ON, shrouding on incomer side, termination shall be suitable for aluminium bus bars. All MCCBs of 250 A and above shall be microprocessor based only. Current density of aluminium and copper busbars shall not be more than 0.80 A per sq.mm. and 1.2A per sq.mm respectively. Incomer:- 125 A 36 kA Ics, 3-Phase 4 Pole MCCB Thermal magnetic set at 100A Panel have provision for fixing CT operated 3 phase Electronic KWH Meter (Digital Type) - 1 No's Phases - 25x 6 mm Al. Neutral - 25 x 6 mm Al
1
-
-
... More
90.12.7.45 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.
42
-
-
... More
od190776/2024_2025 : Supply, installation, testing and commissioning of MC4 Connector- UL rated at 1500 V DC and up to 95 A with the 6AWG PV Cable IP67 weather proof rated.
16
-
-
... More
od190777/2024_2025 : Fabrication, supply and fixing structure for solar panels using GI Pipes including painting using 2 coats of synthetic enamel paint over zinc chromate metal primer.
2400
-
-
... More
od190778/2024_2025 : 16 sq.mm. 1 core Cu FRLS PVC insulated copper conductor
150
-
-
... More
od190779/2024_2025 : Supply, installation, testing and commissioning of kWH meter with CT of 125/5A,CL:0.5s,15VA and giving all necessary connections.
1
-
-
... More
HVAC
-
-
-
... More
od186860/2024_2025 : Supply fixing testing and commissioning of perforated sheet steel slotted cable trays coated with enamel paint of approed color be architect with vertical sides on both ends as per approved design and GI angle supports spaced 1000mm apart throughout the length as specified, including the cost of 1 meter GI rod hangers, hooks, dash fasteners, painting etc. for suspension from ceiling complete as required. All vertical drops shall be covered. (Complete in all respects as per technical specification) 300mm width x 50mm depth x 1.6mm thickness (with 40 x 40 x 6mm GI angle supports)
75
-
-
... More
od186861/2024_2025 : Supply, Installation testing and commissioning of Smoke & Fire dampers in supply air duct/main branch and return air path as and where required of required sizes for AHU's and FAHU's, control wiring, the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per technical specifications. Actuator
2
-
-
... More
od186862/2024_2025 : Supply, Installation testing and commissioning of Smoke & Fire dampers in supply air duct/main branch and return air path as and where required of required sizes for AHU's and FAHU's, control wiring, the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per technical specifications. Fire and Smoke Damper
7
-
-
... More
od186863/2024_2025 : Supply, installation, testing and commissioning of manually operated, opposed blade, duct mounted, flanged volume control dampers of required sizes in<br>GI construction with operating mechanism, mounting arrangement, rubber<br>refrigerant kits etc. complete.
10
-
-
... More
od186864/2024_2025 : Supply, Installation testing and commissioning of Aluminium extruded fresh air sand trap louver swith bird screen etc. complete in all respects as required by the technical specifications.
2
-
-
... More
od186865/2024_2025 : Supply, Installation, testing and commissioning of Aluminium extruded exhaust air louvers with damper, bird screen etc. complete in all respects as required by the technical specifications.
9
-
-
... More
od186866/2024_2025 : Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.
32
-
-
... More
od186867/2024_2025 : Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.
18
-
-
... More
od186868/2024_2025 : Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.
24
-
-
... More
od186869/2024_2025 : Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.
18
-
-
... More
od186870/2024_2025 : Supply, Installation, testing and commissioning of Acoustic lining inside sheet metal ducts with 10mm thick Open Cell nitrile rubber class 1 with antimicrobial properties. ,having density of 140- 180 kg/m3 ,fixing of insulation using OEM recommended fixing details ,supports and adhesive, tapes etc. complete in all respects as per the technical specifications
65
-
-
... More
od186871/2024_2025 : Providing & fixing of adhesive thermal insulation for supply/ return air duct with 25mm<br>nitrile rubber insulation having R-value as per the prevailing provisions in ECBC requirements. Complete in all respects as required by the technical specifications"
78
-
-
... More
od186872/2024_2025 : Supply, installation, testing and commissioning of Fire rate Axial fans working in the event of fire. The unit shall be complete in all respects as per technical specifications and relevant standards. 1.Mounting frame 2.Vibration Mounts 3.Canvas connections fire retardant type 4.Starter and Starter panels 35000 CFM - 25mm of WC
1
-
-
... More
od186873/2024_2025 : Supply, installation, testing and commissioning of Fire rate Axial fans working in the event of fire. The unit shall be complete in all respects as per technical specifications and relevant standards. 1.Mounting frame 2.Vibration Mounts 3.Canvas connections fire retardant type 4.Starter and Starter panels 25000 CFM - 25mm of WC
1
-
-
... More
od186874/2024_2025 : Supply, Installation testing and commissioning of Inline Circular/Cabinet fans of following minimum capacity with suitable blower, Single/3 phase phase(IE3) direct driven/Belt driven motor of following capacity for exhaust, with applicable Starter /Starter panel , structural supports , vibration isolator if required ,other accessories etc. complete in all respects as per technical specifications. 650 CFM at 10 mm static
2
-
-
... More
od186875/2024_2025 : Supply, Installation testing and commissioning of Inline Circular/Cabinet fans of following minimum capacity with suitable blower, Single/3 phase phase(IE3) direct driven/Belt driven motor of following capacity for exhaust, with applicable Starter /Starter panel , structural supports , vibration isolator if required ,other accessories etc. complete in all respects as per technical specifications. 500 CFM at 10 mm static
2
-
-
... More
od186876/2024_2025 : Supply, Installation testing and commissioning of Inline Circular/Cabinet fans of following minimum capacity with suitable blower, Single/3 phase phase(IE3) direct driven/Belt driven motor of following capacity for exhaust, with applicable Starter /Starter panel , structural supports , vibration isolator if required ,other accessories etc. complete in all respects as per technical specifications. 375 CFM at 10 mm static
1
-
-
... More
od186877/2024_2025 : Supply, Installation testing and commissioning of Inline Circular/Cabinet fans of following minimum capacity with suitable blower, Single/3 phase phase(IE3) direct driven/Belt driven motor of following capacity for exhaust, with applicable Starter /Starter panel , structural supports , vibration isolator if required ,other accessories etc. complete in all respects as per technical specifications. 325 CFM at 10 mm static
1
-
-
... More
od186878/2024_2025 : Supply, Installation testing and commissioning of Inline Circular/Cabinet fans of following minimum capacity with suitable blower, Single/3 phase phase(IE3) direct driven/Belt driven motor of following capacity for exhaust, with applicable Starter /Starter panel , structural supports , vibration isolator if required ,other accessories etc. complete in all respects as per technical specifications. 225 CFM at 10 mm static
1
-
-
... More
od186879/2024_2025 : Supply, installation, testing and commissioning of suitable Dia PVC condensate drain pipe of 6kg/sq.cm upto 5m connecting the drain pan of the indoor units to nearest drain point with necessary U-trap, insulated with 9 mm thick closed cell elastomeric insulation finished with 7mils factory laminated glass cloth along with required pipe fittings and accessories like Bends, Tees, reducers, clamps, suitably supported etc. complete in all respects as per the technical specifications. 32 mm Dia
42
-
-
... More
od186880/2024_2025 : Supply, installation, testing and commissioning of suitable Dia PVC condensate drain pipe of 6kg/sq.cm upto 5m connecting the drain pan of the indoor units to nearest drain point with necessary U-trap, insulated with 9 mm thick closed cell elastomeric insulation finished with 7mils factory laminated glass cloth along with required pipe fittings and accessories like Bends, Tees, reducers, clamps, suitably supported etc. complete in all respects as per the technical specifications. 25 mm Dia
29
-
-
... More
od186881/2024_2025 : Supply fixing testing and commissioning of Control wiring / network wiring using recommended quality of multicore cables in PVC Conduit
100
-
-
... More
od186882/2024_2025 : Supply and Installation of Refrigerant piping (Suction & discharge) Hard drawn from hard copper tube of suitable sizes, with copper elbows, tees,necessary hard ware for installation etc. with thermal insulation covering etc as required for above ceiling suspended units. 1 .0 TR
5
-
-
... More
od186883/2024_2025 : Supply and Installation of Refrigerant piping (Suction & discharge) Hard drawn from hard copper tube of suitable sizes, with copper elbows, tees,necessary hard ware for installation etc. with thermal insulation covering etc as required for above ceiling suspended units. 1.5 TR
5
-
-
... More
od186884/2024_2025 : Supply, Installation ,testing and commissioning of Gas/ Liquid Copper Piping with 19mm thick nitrile rubber class 'O' insulation of suitable thick round closed cell elastomeric insulation with minimum R value of 0.7 for pipe size greater than 40mm and 0.4 for less than 40 mm, finished with 7mils factory laminated fibre glass cloth and insulation shall have antimicrobial properties. Refrigerant piping shall have suction filters for gas line, filter drier & sight glass for liquid line as per specification for each indoor machines & outdoor units including chasing, drilling, concealing and making good the same on walls etc of following specifications as per site conditions. Suitable Refnet/ Y joints required for interconnection of piping & required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps, etc shall be considered as part of refrigerant piping .Complete in all respects as per technical specifications. NOTE: The contractor shall ensure that all refrigerant pipe sizes required as per the design of the equipment shall be considered in the line items underneath, even if the refrigerant pipe size is not mentioned in following line items. Both refrigerant suction and liquid line shall be insulated. Complete in all respects as per technical specifications.(Piping quantities are tentative and total cost quoted shall be suitable for site layout, unit location and installation requirement.)9.5 mm
34
-
-
... More
od186885/2024_2025 : Supply, Installation ,testing and commissioning of Gas/ Liquid Copper Piping with 19mm thick nitrile rubber class 'O' insulation of suitable thick round closed cell elastomeric insulation with minimum R value of 0.7 for pipe size greater than 40mm and 0.4 for less than 40 mm, finished with 7mils factory laminated fibre glass cloth and insulation shall have antimicrobial properties. Refrigerant piping shall have suction filters for gas line, filter drier & sight glass for liquid line as per specification for each indoor machines & outdoor units including chasing, drilling, concealing and making good the same on walls etc of following specifications as per site conditions. Suitable Refnet/ Y joints required for interconnection of piping & required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps, etc shall be considered as part of refrigerant piping .Complete in all respects as per technical specifications. NOTE: The contractor shall ensure that all refrigerant pipe sizes required as per the design of the equipment shall be considered in the line items underneath, even if the refrigerant pipe size is not mentioned in following line items. Both refrigerant suction and liquid line shall be insulated. Complete in all respects as per technical specifications.(Piping quantities are tentative and total cost quoted shall be suitable for site layout, unit location and installation requirement.) 12.7 mm
21
-
-
... More
od186886/2024_2025 : Supply, Installation ,testing and commissioning of Gas/ Liquid Copper Piping with 19mm thick nitrile rubber class 'O' insulation of suitable thick round closed cell elastomeric insulation with minimum R value of 0.7 for pipe size greater than 40mm and 0.4 for less than 40 mm, finished with 7mils factory laminated fibre glass cloth and insulation shall have antimicrobial properties. Refrigerant piping shall have suction filters for gas line, filter drier & sight glass for liquid line as per specification for each indoor machines & outdoor units including chasing, drilling, concealing and making good the same on walls etc of following specifications as per site conditions. Suitable Refnet/ Y joints required for interconnection of piping & required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps, etc shall be considered as part of refrigerant piping .Complete in all respects as per technical specifications. NOTE: The contractor shall ensure that all refrigerant pipe sizes required as per the design of the equipment shall be considered in the line items underneath, even if the refrigerant pipe size is not mentioned in following line items. Both refrigerant suction and liquid line shall be insulated. Complete in all respects as per technical specifications.(Piping quantities are tentative and total cost quoted shall be suitable for site layout, unit location and installation requirement.) 15.9 mm
28
-
-
... More
od186887/2024_2025 : Supply, Installation ,testing and commissioning of Gas/ Liquid Copper Piping with 19mm thick nitrile rubber class 'O' insulation of suitable thick round closed cell elastomeric insulation with minimum R value of 0.7 for pipe size greater than 40mm and 0.4 for less than 40 mm, finished with 7mils factory laminated fibre glass cloth and insulation shall have antimicrobial properties. Refrigerant piping shall have suction filters for gas line, filter drier & sight glass for liquid line as per specification for each indoor machines & outdoor units including chasing, drilling, concealing and making good the same on walls etc of following specifications as per site conditions. Suitable Refnet/ Y joints required for interconnection of piping & required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps, etc shall be considered as part of refrigerant piping .Complete in all respects as per technical specifications. NOTE: The contractor shall ensure that all refrigerant pipe sizes required as per the design of the equipment shall be considered in the line items underneath, even if the refrigerant pipe size is not mentioned in following line items. Both refrigerant suction and liquid line shall be insulated. Complete in all respects as per technical specifications.(Piping quantities are tentative and total cost quoted shall be suitable for site layout, unit location and installation requirement.) 19.1mm
14
-
-
... More
od186888/2024_2025 : Supply, Installation ,testing and commissioning of Gas/ Liquid Copper Piping with 19mm thick nitrile rubber class 'O' insulation of suitable thick round closed cell elastomeric insulation with minimum R value of 0.7 for pipe size greater than 40mm and 0.4 for less than 40 mm, finished with 7mils factory laminated fibre glass cloth and insulation shall have antimicrobial properties. Refrigerant piping shall have suction filters for gas line, filter drier & sight glass for liquid line as per specification for each indoor machines & outdoor units including chasing, drilling, concealing and making good the same on walls etc of following specifications as per site conditions. Suitable Refnet/ Y joints required for interconnection of piping & required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps, etc shall be considered as part of refrigerant piping .Complete in all respects as per technical specifications. NOTE: The contractor shall ensure that all refrigerant pipe sizes required as per the design of the equipment shall be considered in the line items underneath, even if the refrigerant pipe size is not mentioned in following line items. Both refrigerant suction and liquid line shall be insulated. Complete in all respects as per technical specifications.(Piping quantities are tentative and total cost quoted shall be suitable for site layout, unit location and installation requirement.) 22.2 mm
6
-
-
... More
od186889/2024_2025 : Supply, Installation ,testing and commissioning of Gas/ Liquid Copper Piping with 19mm thick nitrile rubber class 'O' insulation of suitable thick round closed cell elastomeric insulation with minimum R value of 0.7 for pipe size greater than 40mm and 0.4 for less than 40 mm, finished with 7mils factory laminated fibre glass cloth and insulation shall have antimicrobial properties. Refrigerant piping shall have suction filters for gas line, filter drier & sight glass for liquid line as per specification for each indoor machines & outdoor units including chasing, drilling, concealing and making good the same on walls etc of following specifications as per site conditions. Suitable Refnet/ Y joints required for interconnection of piping & required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps, etc shall be considered as part of refrigerant piping .Complete in all respects as per technical specifications. NOTE: The contractor shall ensure that all refrigerant pipe sizes required as per the design of the equipment shall be considered in the line items underneath, even if the refrigerant pipe size is not mentioned in following line items. Both refrigerant suction and liquid line shall be insulated. Complete in all respects as per technical specifications.(Piping quantities are tentative and total cost quoted shall be suitable for site layout, unit location and installation requirement.) 28.6 mm
21
-
-
... More
od186890/2024_2025 : Supply, Installation ,testing and commissioning of Gas/ Liquid Copper Piping with 19mm thick nitrile rubber class 'O' insulation of suitable thick round closed cell elastomeric insulation with minimum R value of 0.7 for pipe size greater than 40mm and 0.4 for less than 40 mm, finished with 7mils factory laminated fibre glass cloth and insulation shall have antimicrobial properties. Refrigerant piping shall have suction filters for gas line, filter drier & sight glass for liquid line as per specification for each indoor machines & outdoor units including chasing, drilling, concealing and making good the same on walls etc of following specifications as per site conditions. Suitable Refnet/ Y joints required for interconnection of piping & required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps, etc shall be considered as part of refrigerant piping .Complete in all respects as per technical specifications. NOTE: The contractor shall ensure that all refrigerant pipe sizes required as per the design of the equipment shall be considered in the line items underneath, even if the refrigerant pipe size is not mentioned in following line items. Both refrigerant suction and liquid line shall be insulated. Complete in all respects as per technical specifications.(Piping quantities are tentative and total cost quoted shall be suitable for site layout, unit location and installation requirement.) 34.9mm
8
-
-
... More
od186891/2024_2025 : Supply, Installation ,testing and commissioning of Gas/ Liquid Copper Piping with 19mm thick nitrile rubber class 'O' insulation of suitable thick round closed cell elastomeric insulation with minimum R value of 0.7 for pipe size greater than 40mm and 0.4 for less than 40 mm, finished with 7mils factory laminated fibre glass cloth and insulation shall have antimicrobial properties. Refrigerant piping shall have suction filters for gas line, filter drier & sight glass for liquid line as per specification for each indoor machines & outdoor units including chasing, drilling, concealing and making good the same on walls etc of following specifications as per site conditions. Suitable Refnet/ Y joints required for interconnection of piping & required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps, etc shall be considered as part of refrigerant piping .Complete in all respects as per technical specifications. NOTE: The contractor shall ensure that all refrigerant pipe sizes required as per the design of the equipment shall be considered in the line items underneath, even if the refrigerant pipe size is not mentioned in following line items. Both refrigerant suction and liquid line shall be insulated. Complete in all respects as per technical specifications.(Piping quantities are tentative and total cost quoted shall be suitable for site layout, unit location and installation requirement.)41.5mm
6
-
-
... More
od186892/2024_2025 : Supply of split/ Package air cooled Air-conditioners each complete with Rotary compressor, air cooled condensor, GSS casing, filters, cooling coils, fan motors, copper refrigerant piping (insulated) length as per drawing maximum upto 3 mts, control wiring, refrigerant controls and accessories, including MICRO-PROCESSOR CONTROL with indication lamps for the operation of the system with inbuilt thermostat remote controller operated with Micro- processor control panel for each machine. Tenderes to elaborate the features of Micro- processor panel. GI painted frame works for outdoor units & making good of civil work's1.0TR
4
-
-
... More
od186893/2024_2025 : Supply, installation testing and commissioning of air Cooled Ductable Split Unit of specified capacities. The indoor units shall be ceiling suspended type. The indoor unit shall comprise of Fan, Cooling Coil, Filter and Expansion device.The Outdoor unit shall comprise of Hermetic scroll compressors. Air cooled condenser & Condenser fan. If multiple compressors are offered, they shall have independent refrigerant circuits. Also, Compressors shall be cut-off automatically under part load conditions. The units shall have microprocessor controls. Scope shall include all supports for the indoor and outdoor units and connect the indoor door with the ducts. The units shall be factory assembled and only the refrigerant piping carried out at site.1.5 TR
1
-
-
... More
od186894/2024_2025 : Supply installation testing and commissioning of VRF compatible 4 way Cassette unit type with cordless remote, of following minimum capacities suitable for operation single phase, 230 V, 50Hz supply, including fixing of room unit, with high lift drain pump, all associated electrical works including accessories including power socket/power/control cabling etc, ,the filter shall be plasma and synthetic washable media type arranged for convenient cleaning and replacement. PVC condensate drain pipe (upto 5m) 6kg/sq.cm of suitable dia connecting to the drain pan of the indoor units to nearest drain point with necessary U-traps, elbows, fittings etc. duly insulated with 9 mm thick closed cell elastomeric class 0 insulation finished with 7 mils factory laminated glass cloth & with required accessories like structural supports, Vibration isolator etc. complete in all respects as per technical specifications. Color/Finish(Powder Coating) shall be selected or approved by Architects (Complete in all respects as per technical specification)3TR 4 Way Cassette with drain pump
1
-
-
... More
od186895/2024_2025 : Supply, installation testing and commissioning of Ceiling Suspended AHUs Inverter Type Ducted Units of specified capacities, nominal capacity condensing unit with all standard fittings, safety devices, like HP/LP cutout, single phase preventor, overload relays, R-410A Gas, vibration isolation pads etc. Suitable to work till 50 Deg ambient, Blue Fin Condenser and Corrosion Resistant Body, Wide Voltage Range 360V- 440V,Scroll Compressor-driven Out door unit stand for Ducted machine ,vibration isolation pads etc. complete including all charges, Anticorrosive black paint (2 coat epoxy painting and 2 coat primer ) etc. (Complete in all respects as per technical specification)2TR highwall VRF compatible unit
2
-
-
... More
od186896/2024_2025 : Supply, installation testing and commissioning of Ceiling Suspended AHUs Inverter Type Ducted Units of specified capacities, nominal capacity condensing unit with all standard fittings, safety devices, like HP/LP cutout, single phase preventor, overload relays, R-410A Gas, vibration isolation pads etc. Suitable to work till 50 Deg ambient, Blue Fin Condenser and Corrosion Resistant Body, Wide Voltage Range 360V- 440V,Scroll Compressor-driven Out door unit stand for Ducted machine ,vibration isolation pads etc. complete including all charges, Anticorrosive black paint (2 coat epoxy painting and 2 coat primer ) etc. (Complete in all respects as per technical specification) 3.5 TR AHU Ducted unit
1
-
-
... More
od186897/2024_2025 : Supply, installation testing and commissioning of Ceiling Suspended AHUs Inverter Type Ducted Units of specified capacities, nominal capacity condensing unit with all standard fittings, safety devices, like HP/LP cutout, single phase preventor, overload relays, R-410A Gas, vibration isolation pads etc. Suitable to work till 50 Deg ambient, Blue Fin Condenser and Corrosion Resistant Body, Wide Voltage Range 360V- 440V,Scroll Compressor-driven Out door unit stand for Ducted machine ,vibration isolation pads etc. complete including all charges, Anticorrosive black paint (2 coat epoxy painting and 2 coat primer ) etc. (Complete in all respects as per technical specification) 10 TR AHU Ducted unit
1
-
-
... More
od186898/2024_2025 : Supply, installation testing and commissioning of Ceiling Suspended AHUs Inverter Type Ducted Units of specified capacities, nominal capacity condensing unit with all standard fittings, safety devices, like HP/LP cutout, single phase preventor, overload relays, R-410A Gas, vibration isolation pads etc. Suitable to work till 50 Deg ambient, Blue Fin Condenser and Corrosion Resistant Body, Wide Voltage Range 360V- 440V,Scroll Compressor-driven Out door unit stand for Ducted machine ,vibration isolation pads etc. complete including all charges, Anticorrosive black paint (2 coat epoxy painting and 2 coat primer ) etc. (Complete in all respects as per technical specification) 15 TR AHU Ducted unit
2
-
-
... More
od186899/2024_2025 : Supply, Installation ,testing and commissioning of the following minimum capacity Air-cooled VRF (Variable Refrigerant Flow) Outdoor unit with variable speed inverter driven multiple compressors complete with suitable capacity drive motors conforming to IE3 as per IS 12615, air cooled condenser, R410A refrigerant, oil separator, with all accessories, and safety devices like thermal protector, pressure relief valve, high-low pressure cut off etc . Necessary structural supports, ODU vibration isolators shall be considered . Equipment shall be suitable for 3 phase, 415 V, 50Hz supply along with suitably rated starter panel & associated accessories, suitable interconnecting control cabling between IDUs, ODUs ,power cabling between isolator and single/multiple outdoor units along with associated electrical accessories. Required supports including structural supports /RCC/ cement concrete foundation shall be included as part of equipment . COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5. The efficiency of the equipment shall meet ECBC/ASHRAE latest standards etc. complete in all respects as per the technical specifications.(single feeder power source will be provided for outdoor units).All the structural corrosion resistant structural supports/concrete pedestals for mounting indoor/outdoor equipment's shall be included.Gas charging with refrigerent R 410 A shall be included at sufficient quantity recommended by the manufacturer. (Complete in all respects as per technical specification) 60 HP air cooled
1
-
-
... More
CHARGING
-
-
-
... More
od190570/2024_2025 : Supply and installation of Car charging unit with shock free enclouser fire retardent . Degree of protection for empty enclouser IP65(IEC 60529)Mechanical Impact strangeth for empty enclousher IK08 (IEC 62262)system voltage 415 V 50Hz AC Mounting type :Wall mounted . 7.5 kw output with a single phase surge protection device with all wiring including RCCB,MCB & contactor controlled by RFID card for individual users.
1
-
-
... More
APPENDIX-2 FIRE FIGHTING WORKS
PUMP
-
-
-
... More
od189245/2024_2025 : Fabrication, Supplying, Installation, Testing and Commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm. thick CRCA sheet, compartmentalized with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter connection, having switchgears and accessories mounting and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for operation on 415 V, 3 phase, 50 Hz. AC supply with enclosure protection class IP 42 required.(A) COMMON PANEL IN FIRE PUMP HOUSE-INCOMER<br>(a)250Amps. TPN isolator, (b) Voltmeter (0-500 Volts) with selector switch.(c) Ammeter (0-250 Amps) with selector switch & CT's etc.(d)Set of 3 Phase indicating lamp.(e)Set of Al. bus bar 250Amps.OUT GOING(a) Main Fire pump 200Amps. TPN isolator for suitable HP fully automatic star delta starter with over load protection, current sensing type single phase preventer complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/ OFF operation. (b) Jockey pump- 32 Amps. TPN fuses for two Jockey Pumps fully DOL starter with over load protection, current sensing type single phase preventer complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/ OFF operation.(c)Diesel Engine Control.-(a) 2 Pole MCB 16Amps,PLC Control for Diesel Engine comprising:-(i)Auto/Manual selector switch & 3 attempt starting device, timers and relays as required, push buttons, start/stop in manual mode.(ii)Indication lamp for High/Low Lub. Oil pressure, High Water Temp. and Engine ON indication.(iii)SMF Battery VRLA type with charger suitable for 12 V/ 24 V DC with boost and tickle selector switch, 0-30 V DC volt meter, 0- 20A DC Ammeter(iv)All standard relays and accessories for automatic operation of diesel engine.e) All automatic operation of Main Pump, Sprinkler Pump & Jockey Pump as per IS/CPWD specification attached<br>
1
-
-
... More
od189246/2024_2025 : Supply, installation, testing and commissioning of Diesel Engine driven high pressure centrifugal fire pump, suitable for automatic operation consisting of the following:a) Horizontal type, centifugal, end suction pump of cast iron body and cast iron impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 kg/sq.cm at the highest and farthest outlet at specified flow of 2280 lpm at 65 m head conforming to IS 1520"b) 62 HP ,water cooled with radiator, diesel engine conforming to relevant BS & IS standard complete with auto starting mechanism, 12 Volts electric starting equipment, suitable batteries, battery charger, diesel tank of adequate capacity to run the pump for 4 hrs, control panelfor diesel engine pump, exhaust pipe extended upto 1 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, pained with postoffice red colour etc. as required.c. Common base plate for (a) and (b) from M.S. Channel for required size.d. )Suitable cement concrete foundation with cement concrete plaster (design and drawing to be provided by the Contractor while the foundation will be done by others) complete with anti- vibration arrangement of cushy foot mountings and provide necesssary earthing as per IS standards.
1
-
-
... More
od189247/2024_2025 : Supply, erection, Testing and Commissioning Electrically driven Cenrtifugal Mono block end suction Jockey Pump of capacity 180 LPM, 10 HP @ 70 mtr Head with mechanical seal, with all the necessary accessories operating on 3 Ph. 50 Hz. 415 V AC supply including foundation, bolts, etc as complete.(cabling between pannel to pumps are not considered) in
1
-
-
... More
od189248/2024_2025 : Supplying, installation, testing and commissioning of End suction type Electric Motor Driven Pump suitable for automatic operation rated for 2280 LPM @ 55 mtr Head with mechanical seal, with high efficency, volute type with cast iron casing, s s impeller, TEFC type having 50 HP . The operating voltage is 415v 3 phase 50 Hz, 2900 Rpm. The pumpset is of foot mounted type including all accessories such as standard coupling, coupling guard, common baseframe, foundation bolts, etc as complete.(cabling between pannel to pumps are not considered)
1
-
-
... More
od190081/2024_2025 : Providing & fixing MS Class ‘C’ Diesel engine exhaust pipe (including all fittings, clamps, steel support) of suitable dia for the engine. The pipe shall be provided with 12 mm thick supercera ceramic fibre rope (65mm dia)
18
-
-
... More
VALVE
-
-
-
... More
od190088/2024_2025 : Providing and fixing CI `Y' strainer suitable for operating pressure of 16 Kg / sqcm with SS 304 perforated sheet basket including rubber gasket, flanges, nuts, bolts and washers, complete as required. 200 mm dia
1
-
-
... More
od190089/2024_2025 : Supplying, fixing, testing and commissioning of following NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end & PN16 pressure rating as specified 200 mm dia
1
-
-
... More
od190090/2024_2025 : Supplying, fixing, testing and commissioning of following NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end & PN16 pressure rating as specified 150 mm dia
2
-
-
... More
od190091/2024_2025 : Supplying, fixing, testing and commissioning of following NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end & PN16 pressure rating as specified 100 mm dia
1
-
-
... More
od190092/2024_2025 : Supplying, fixing, testing and commissioning of following BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O ring & PN 10 pressure rating as specified 200mm dia
1
-
-
... More
od190093/2024_2025 : Supplying, fixing, testing and commissioning of following BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O ring & PN 10 pressure rating as specified 150mm dia
4
-
-
... More
od190094/2024_2025 : Supplying, fixing, testing and commissioning of following BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O ring & PN 10 pressure rating as specified 100mm dia
1
-
-
... More
od190095/2024_2025 : Providing and fixing forged brass ball valve with forged brass ball suitable for operating pressure of not less than 16 kg / sq.cm of the following size.25 mm Dia
2
-
-
... More
od190096/2024_2025 : Providing and fixing forged brass ball valve with forged brass ball suitable for operating pressure of not less than 16 kg / sq.cm of the following size.20 mm Dia
6
-
-
... More
od190097/2024_2025 : Providing and fixing in position the industrial type pressure gauges with gun metal/brass valve complete as required .
2
-
-
... More
od190098/2024_2025 : Supply, installation, testing and commissioning of industrial type pressure switch having 1/4"" BSP(F) connection IP:32 enclosure protection, phosphor bronze bellows as sensing element, SDPT contact system, switch rating 6A Inductive/lOA resistive 380 V AC, 0.2A Inductive/10A resistive 250V DC suit with ball valve etc. complete as required.
3
-
-
... More
od190099/2024_2025 : Providing, fixing, testing and commissioning of Precharged air vessel (size 200mm dia & 1200 mm height) for pressurization of hydrant / sprinkler system complete with adequate pressure switches (as per design / requirement) with valves to operate as per operating sequences including 25 mm dia drain valve, air release valve with stop cock on the top, 25 mm dia inlet with isolating valve duly painted from inside and outside complete as required.
1
-
-
... More
PIPES
-
-
-
... More
od190102/2024_2025 : Providing, laying, jointing and testing of following sizes of MS 'C class pipes, conforming to IS-1239 with all accessories like all fittings including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting / fixing the pipe on floor/wall/ceiling with clamps, hangers (using anchor fastners) Anticorrosive sheet for pipe warapping for under ground pipe as per specification. Pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls / floors and sealing the sleeves with glass wool in between & fire sealent compound at either end all as per Project Manager’s requirements including cutting holes and chases in brick, RCC work and making good the same to original conditions complete in all respects.150 mm dia
120
-
-
... More
od190103/2024_2025 : <br>Providing, laying, jointing and testing of following sizes of MS 'C class pipes, conforming to IS-1239 with all accessories like all fittings including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor/wall/ceiling with clamps, hangers (using anchor fasteners) as per specification. Pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between & fire sealent compound at either end all as per Project Manager’s requirements including cutting holes and chases in brick, RCC work and making good the same to original conditions complete in all respects.All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwise and then supply of the same shall also be included for rates under this head. Welding of any kind on the galvanized support/hanger shall not be permitted Provide two coats of synthetic enamel paint of approved shade over a coat of primer. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. Including painting of legends both directions arrow 100 mm dia<br>
32
-
-
... More
od190104/2024_2025 : <br>Providing, laying, jointing and testing of following sizes of MS 'C class pipes, conforming to IS-1239 with all accessories like all fittings including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor/wall/ceiling with clamps, hangers (using anchor fasteners) as per specification. Pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between & fire sealent compound at either end all as per Project Manager’s requirements including cutting holes and chases in brick, RCC work and making good the same to original conditions complete in all respects.All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwise and then supply of the same shall also be included for rates under this head. Welding of any kind on the galvanized support/hanger shall not be permitted Provide two coats of synthetic enamel paint of approved shade over a coat of primer. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. Including painting of legends both directions arrow 80 mm dia<br>
50
-
-
... More
od190105/2024_2025 : <br>Providing, laying, jointing and testing of following sizes of MS 'C class pipes, conforming to IS-1239 with all accessories like all fittings including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor/wall/ceiling with clamps, hangers (using anchor fasteners) as per specification. Pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between & fire sealent compound at either end all as per Project Manager’s requirements including cutting holes and chases in brick, RCC work and making good the same to original conditions complete in all respects.All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwise and then supply of the same shall also be included for rates under this head. Welding of any kind on the galvanized support/hanger shall not be permitted Provide two coats of synthetic enamel paint of approved shade over a coat of primer. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. Including painting of legends both directions arrow 65 mm dia
54
-
-
... More
od190106/2024_2025 : <br>Providing, laying, jointing and testing of following sizes of MS 'C class pipes, conforming to IS-1239 with all accessories like all fittings including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor/wall/ceiling with clamps, hangers (using anchor fasteners) as per specification. Pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between & fire sealent compound at either end all as per Project Manager’s requirements including cutting holes and chases in brick, RCC work and making good the same to original conditions complete in all respects.All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwise and then supply of the same shall also be included for rates under this head. Welding of any kind on the galvanized support/hanger shall not be permitted Provide two coats of synthetic enamel paint of approved shade over a coat of primer. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. Including painting of legends both directions arrow 50 mm dia<br>
100
-
-
... More
od190107/2024_2025 : <br>Providing, laying, jointing and testing of following sizes of MS 'C class pipes, conforming to IS-1239 with all accessories like all fittings including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor/wall/ceiling with clamps, hangers (using anchor fasteners) as per specification. Pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between & fire sealent compound at either end all as per Project Manager’s requirements including cutting holes and chases in brick, RCC work and making good the same to original conditions complete in all respects.All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwise and then supply of the same shall also be included for rates under this head. Welding of any kind on the galvanized support/hanger shall not be permitted Provide two coats of synthetic enamel paint of approved shade over a coat of primer. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. Including painting of legends both directions arrow 40 mm dia<br>
82
-
-
... More
od190108/2024_2025 : <br>Providing, laying, jointing and testing of following sizes of MS 'C class pipes, conforming to IS-1239 with all accessories like all fittings including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor/wall/ceiling with clamps, hangers (using anchor fasteners) as per specification. Pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between & fire sealent compound at either end all as per Project Manager’s requirements including cutting holes and chases in brick, RCC work and making good the same to original conditions complete in all respects.All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwise and then supply of the same shall also be included for rates under this head. Welding of any kind on the galvanized support/hanger shall not be permitted Provide two coats of synthetic enamel paint of approved shade over a coat of primer. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. Including painting of legends both directions arrow 32 mm dia<br>
112
-
-
... More
od190109/2024_2025 : Providing, laying, jointing and testing of following sizes of MS 'C class pipes, conforming to IS-1239 with all accessories like all fittings including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor/wall/ceiling with clamps, hangers (using anchor fasteners) as per specification. Pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between & fire sealent compound at either end all as per Project Manager’s requirements including cutting holes and chases in brick, RCC work and making good the same to original conditions complete in all respects.All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwise and then supply of the same shall also be included for rates under this head. Welding of any kind on the galvanized support/hanger shall not be permitted Provide two coats of synthetic enamel paint of approved shade over a coat of primer. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. Including painting of legends both directions arrow 25 mm dia<br>
365
-
-
... More
od190110/2024_2025 : Providing, laying, jointing and testing of following sizes of MS 'C class pipes, conforming to IS-1239 with all accessories like all fittings including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting / fixing the pipe on floor/wall/ceiling with clamps, hangers (using anchor fastners) as per specification. Pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls / floors and sealing the sleeves with glass wool in between & fire sealent compound at either end all as per Project Manager’s requirements including cutting holes and chases in brick, RCC work and making good the same to original conditions complete in all respects. 200 mm dia
6
-
-
... More
od190111/2024_2025 : Providing, laying, jointing and testing of following sizes of MS 'C class pipes, conforming to IS-1239 with all accessories like all fittings including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting / fixing the pipe on floor/wall/ceiling with clamps, hangers (using anchor fastners) as per specification. Pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls / floors and sealing the sleeves with glass wool in between & fire sealent compound at either end all as per Project Manager’s requirements including cutting holes and chases in brick, RCC work and making good the same to original conditions complete in all respects. 150 mm dia
172
-
-
... More
od190112/2024_2025 : Providing, laying, jointing and testing of following sizes of MS 'C class pipes, conforming to IS-1239 with all accessories like all fittings including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting / fixing the pipe on floor/wall/ceiling with clamps, hangers (using anchor fastners) as per specification. Pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls / floors and sealing the sleeves with glass wool in between & fire sealent compound at either end all as per Project Manager’s requirements including cutting holes and chases in brick, RCC work and making good the same to original conditions complete in all respects. 100 mm dia
72
-
-
... More
od190113/2024_2025 : Providing, laying, jointing and testing of following sizes of MS 'C class pipes, conforming to IS-1239 with all accessories like all fittings including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting / fixing the pipe on floor/wall/ceiling with clamps, hangers (using anchor fastners) as per specification. Pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls / floors and sealing the sleeves with glass wool in between & fire sealent compound at either end all as per Project Manager’s requirements including cutting holes and chases in brick, RCC work and making good the same to original conditions complete in all respects. 25 mm dia
12
-
-
... More
HYDRANT
-
-
-
... More
od190161/2024_2025 : Providing & fixing SS fire brigade connection (suction collecting head) consisting of 4 No. 63 mm dia instantaneous type male couplings with built-in check valves, 1 No. 150 mm dia sluice valve, (1 No. 150 mm dia non-return valve) and 150 mm dia flanged outlet complete with bolts, nuts and rubber insertions as required and as per IS standards
1
-
-
... More
od190162/2024_2025 : Supply and fixing cabinet ,The cabinet shall be suitable to accommodate 1 No. 15 mtr long Hose pipe & 1 No. branch pipe nozzle. It shall be mounted on raised Brick platform complete as required. (Cost shall be inclusive of providing break glass box containing key for the cabinet along with hammer).
10
-
-
... More
od190163/2024_2025 : Providing and Fixing aluminium 63 mm dia instantaneous pattern branch short pipe, 20 mm dia nozzle conforming to IS standard, suitable for inter connection to hose pipe coupling complete as required.
10
-
-
... More
od190164/2024_2025 : Providing & fixing non-perlocating, rubber reinforced lined fire hose pipe of 63 mm dia and length as described below. The hose shall be rated for brust pressure of 35.7 Kg/sqcm. Hose shall be complete with ISI marked aluminium coupling bound & rivetted to hose pipe with copper rivets & 1.5 mm copper wire. 15 m length
10
-
-
... More
od190165/2024_2025 : Supply, installation, testing and commissioning of first aid rubber hose each of 30 mtrs length with nozzle wound on guided hose reel drum fixed on swinging bracket with standard accessories.
6
-
-
... More
od190166/2024_2025 : Supply, installation, testing and commissioning of SS 304 Single headed hydrant valve of 63mm dia oblique type instantaneous hose coupling adaptor etc complete as required indoor hose cabinet.
10
-
-
... More
DRAW OUT
-
-
-
... More
od190221/2024_2025 : Supply and fixing of cast iron pipe 100 mm dia
6
-
-
... More
od190222/2024_2025 : Supply and fixing of cast iron foot valve for the following size 100 mm dia
1
-
-
... More
od190223/2024_2025 : Providing & fixing SS fire brigade suction hose coupling (draw- out connection) with nut for female coupling as per IS standards complete with built-in check valves,
1
-
-
... More
SPRINKLER LINE
-
-
-
... More
od190224/2024_2025 : Supplying, fixing, testing & commissioning of Sprinkler Flexible Hose 1000 mm in length, Unbraided, UL Listed along with all necessary accessories like Nipple threaded<br>, Reducing Nipple threaded, Large Bracket with Bolt, Small Bracket with Bolt, clamps,reduser collar,Meter Square Bar etc complete as per spec.
1
-
-
... More
od190225/2024_2025 : Supply, installation, testing and commissioning of approved make 15mm dia SS Sprinkler heads, quick response, designed to operate at 68 deg. Celsius etc. with necessery fittings etc of Side wall type
6
-
-
... More
od190226/2024_2025 : Supply, installation, testing and commissioning of approved make 15mm dia SS Sprinkler heads, quick response, designed to operate at 68 deg. Celsius etc. with necessery fittings etc of Pendant type
255
-
-
... More
od190227/2024_2025 : Providing & Fixing of Installation Control Valve 150mm with turbine type Mechanic Alarm Gong to be connected with control valve, drain & test valve and all other necessary components as per manufacturer's specifications complete as required
1
-
-
... More
od190228/2024_2025 : Supply, installation, testing and commissioning of electrically operated water flow switches (Vane type) including tamper switch and accessories, complete with tap off socket arrangement as required, with potential free contact with 2 Nos. NONC.
6
-
-
... More
FIRE EXTINGUISHERS
-
-
-
... More
od190277/2024_2025 : Supply, installation, testing and commissioning of fire extinguisher of capacity 4.5 kg CO2 type complete. With ISI Mark as per IS:15683.<br>
2
-
-
... More
od190278/2024_2025 : Supply, installation, testing and commissioning of fire extinguisher of capacity 4Kg ABC type complete. With ISI Mark as per IS:15683
6
-
-
... More
FIRE ALARM
-
-
-
... More
od190279/2024_2025 : Providing and installing in position the Fire safety Plan to a recommended scale and at suggested locations
6
-
-
... More
od190280/2024_2025 : Providing and fixing in position the signage's "" FIRE ORDER""r on 3mm thick ""Opaque"" PVC foam board of computerized cut, PVC non-reflective self adhesive vinyl painted foam board of 750mm x 450mm.
1
-
-
... More
od190281/2024_2025 : <br>Supplying and installing of in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC Non-reflective self- adhesive vinyl painted foam board, complete with mirror fasteners. FIRE EXIT , EXIT FIRE DUCT, FIRE Lift Assembly point
24
-
-
... More
od190282/2024_2025 : Providing and installing in position the following type of sign boards made out of 3mm thick rigid PVC board with computer cut with texts written to recommended height in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification."Signage with printed ""IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED OTHERWISE"" of<br>1.5cm height letters in red with white back ground.The size of the board shall be 25cm x 30 cm and shall be fixed at the height of 2 mts. from finished floor near Manual call points.Auto Glo
2
-
-
... More
od190311/2024_2025 : Supply & laying of 20 mm dia medium grade rigid PVC conduit ISI mark with elbow, tees, jn: boxes, saddle clip and with necessary fittings.
450
-
-
... More
od190312/2024_2025 : Supply Installation testing and commissioning of 1 sq.mm PVC insulated Copper cable with accessories as required
1350
-
-
... More
od190313/2024_2025 : Supply, Installation, Testing and Commissioning of 6W wall mounted type Speakers with talk back facility, in CRCA sheet fabricated housing, complete with switch.
6
-
-
... More
od190314/2024_2025 : Supply, Testing and commissioning of Conventional type 6 zone Fire Alarm cum PA Talk Back Control Panel. The panel having 24 PA zone selector, talk back selector switch, mic and 180 Watts power amplifier & micro processor based control panel, audio and visual display; housed in a MS cabinet powder coated with all necessary attachments.
1
-
-
... More
od190315/2024_2025 : Supply, Testing and commissioning of Conventional type Audio alarm hooter (sounder) powder coated MS box, 24/12 Volt DC operated with necessary attachments.
6
-
-
... More
od190316/2024_2025 : Supply, Testing and commissioning of Conventional type Manual Call Point break glass type powder coated MS box ,24/12 Volt DC operated, and with necessary attachments."
6
-
-
... More
NOC
-
-
-
... More
od190283/2024_2025 : NOC Charges - Preparing Drawings and checklist printing, conducting Fire force Inspection, Online File submission and necessary follow ups for obtaining NOC from Fire force Department.
1
-
-
... More
APPENDIX -3 PHE WORKS
Sanitary Works
-
-
-
... More
od187697/2024_2025 : Providing, Fixing, Testing and Commissioning at site Wall Mounting type water closet with P trap & its all fittings like rag bolts, solid plastic Seat cover etc and Concealed flushing cistern, brass screws, nuts , and washers complete including cutting and making good the walls and floors wherever required. Etc complete.
4
-
-
... More
17.4.1 : Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:One urinal basin with 5 litre white P.V.C. automatic flushing cistern
6
-
-
... More
od188301/2024_2025 : Providing, Fixing, Commissioning at site Urinal Partition with Curved shaped frosted glass fixing with brass screws, nuts , and washers complete including cutting and making good the walls and floors wherever required Etc complete. 900x450x10 mm tk.
9
-
-
... More
17.7.2 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap
3
-
-
... More
18.53.1 : Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore
72
-
-
... More
50.17.1.5 : Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
7
-
-
... More
17.32.3 : Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Oval shape 450x350 mm (outer dimensions)
12
-
-
... More
17.32.4 : Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm
2
-
-
... More
18.51.1 : Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore
10
-
-
... More
17.10.1.3 : Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink with drain board510x1040 mm bowl depth 200 mm
3
-
-
... More
od188302/2024_2025 : Providing, Fixing, testing and commissioning Sink cock table mounted with swivel casted spout and wall flange, trending,cutting and making good the walls wherever required. 15mm nominal bore
3
-
-
... More
od188303/2024_2025 : Providing, Fixing, testing and commissioning at site CP. Bottle Trap For Wash Basin, 15mm nominal bore
18
-
-
... More
od188304/2024_2025 : Providing, Fixing CP Robe Hook with fixing screws
17
-
-
... More
50.17.1.2 : Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
18
-
-
... More
17.34.1 : Providing and fixing toilet paper holder:C.P. brass
17
-
-
... More
17.71 : Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms
12
-
-
... More
50.17.1.1 : Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
43
-
-
... More
od188305/2024_2025 : Providing and erecting water cooler having storage capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp of 450 C. The outlet temp. of the water should by 150 C within a hour, The water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating coil, thermostats, relay etc. complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel.
2
-
-
... More
od188307/2024_2025 : Providing, Supply, installation, testing and commissioning of CP Grab bar 60 cm, complete including cutting and making good the walls, wherever required.
4
-
-
... More
od188309/2024_2025 : Providing, Supply, installation, testing and commissioning of CP Hinged rail , complete including cutting and making good the walls, wherever required.
2
-
-
... More
od188316/2024_2025 : Fixing, testing and commissioning of Single Lever Diverter with provision for spout and over head shower with shower arm, shower rose, wall flange and spout, all accessories etc, complete.
4
-
-
... More
Soil, waste, Vent, Rain water pipes
-
-
-
... More
50.18.8.6.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2
76
-
-
... More
od188324/2024_2025 : B SOIL, WASTE, VENT & RAIN WATER PIPES <br>Providing, Fixing, testing and commissioning at site in position uPVC pipe (SWR-Type B) (IS:13592) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, clamps, coupling, door bends, junctions, cowls, etc., laid under floor/fixed on walls, and in pipe shafts, universal clamps & anchor fasteners(8mm), threaded rod (8mm),nuts, washers, wherever required etc. complete. (In Shaft)110 mm O.D TYPE-B
124
-
-
... More
od188328/2024_2025 : <br>Providing, Fixing, testing and commissioning at site in position uPVC pipe (SWR-Type B) (IS:13592) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, clamps, coupling, door bends, junctions, cowls, etc., laid under floor/fixed on walls, and in pipe shafts, universal clamps & anchor fasteners(8mm), threaded rod (8mm),nuts, washers, wherever required etc. complete. (In Shaft)75 mm O.D -TYPE-B
156
-
-
... More
od188331/2024_2025 : Providing, Fixing, testing and commissioning at site in position uPVC pipe (SWR-Type A) (IS:13592) or ( IS : 4985 ) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, clamps, coupling, etc. complete. (For Rain water pipes )110mm O.D Type A
150
-
-
... More
od188332/2024_2025 : Providing, Fixing, testing and commissioning at site in position u PVC pipe of 6Kg/sq.cm (IS:4985) & SWR Type B IS 13592 including PVC fittings with bosses where required e.g. tees, bends, clamps, coupling and adapters and jointing with adhesive approved by fitting manufactures including cutting and making good the walls and floors or surface mounted with clamps as required at site universal clamps & anchor fasteners(8mm) , threaded rod(8mm),nuts, washers, wherever required etc. complete. (For Internal waste line)50 MM 6KGF/CM2
76
-
-
... More
od188340/2024_2025 : Providing, Fixing, testing and commissioning at site in position u PVC pipe of 6Kg/sq.cm (IS:4985) & SWR Type B IS 13592 including PVC fittings with bosses where required e.g. tees, bends, clamps, coupling and adapters and jointing with adhesive approved by fitting manufactures including cutting and making good the walls and floors or surface mounted with clamps as required at site universal clamps & anchor fasteners(8mm) , threaded rod(8mm),nuts, washers, wherever required etc. complete. (For Internal waste line)75 mm O.D.
140
-
-
... More
od188343/2024_2025 : Providing, Fixing, testing and commissioning at site in position u PVC pipe of 6Kg/sq.cm (IS:4985) & SWR Type B IS 13592 including PVC fittings with bosses where required e.g. tees, bends, clamps, coupling and adapters and jointing with adhesive approved by fitting manufactures including cutting and making good the walls and floors or surface mounted with clamps as required at site universal clamps & anchor fasteners(8mm) , threaded rod(8mm),nuts, washers, wherever required etc. complete. (For Internal waste line)110 MM 6KGF/CM2
160
-
-
... More
od188366/2024_2025 : Supplying,Fixing, Testing and commissioning at site in position 150x150mm square C.P cast brass or stainless steel anti cockroach grating cover ss (304) of matching size of UPvc fabricated floor trap / multi inlet trap complete in all respects
55
-
-
... More
od188367/2024_2025 : Providing, Fixing, testing and commissioning at site in position Concealed floor trap (7”Deep Seal UPvc fabricated Multi floor trap and suitable supporting on GI slotted rails (1.6mmthick) full threaded rod, anchor fasteners etc. complete in all respects.<br> 50/75 mm dia outlet
63
-
-
... More
od188385/2024_2025 : Providing, Fixing, testing and commissioning at site in position Floor clean out with Stainless Steel Square frames SS (304), Rubber Seal and flat round cover with screw. complete in all respects.
8
-
-
... More
od188387/2024_2025 : Providing, Fixing, testing at site in position 160mm dia square /circular grating Terrace rain water outlet (Cast Iron/SS )<br>(for 110mm dia pipe)
6
-
-
... More
50.18.8.8.2 : Providing and fixing PVC pipes, fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per the direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 4 kgf/cm2
130
-
-
... More
50.18.9.1.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge 15 mm dia 12Kfg/cm2
160
-
-
... More
Water supply internal & external
-
-
-
... More
18.7.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall20 mm nominal outer dia pipes
177
-
-
... More
18.7.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall25 mm nominal outer dia pipes
54
-
-
... More
od189751/2024_2025 : Providing, Fixing at site in position uPVC Pipes (as per ASTM D – 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D – 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft) 25mm dia<br><br>
32
-
-
... More
od189752/2024_2025 : Providing, Fixing at site in position uPVC Pipes (as per ASTM D – 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D – 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft)20 mm nominal outer dia pipes<br>
62
-
-
... More
od189795/2024_2025 : Providing, Fixing at site in position uPVC Pipes (as per ASTM D – 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D – 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft) 32MM pipe
102
-
-
... More
od189857/2024_2025 : Providing, Fixing at site in position uPVC Pipes (as per ASTM D – 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D – 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft)40mm nominal outer dia pipes
103
-
-
... More
od189862/2024_2025 : Providing, Fixing at site in position uPVC Pipes (as per ASTM D – 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D – 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft)50mm nominal outer dia pipes
135
-
-
... More
od189879/2024_2025 : Providing, Fixing at site in position uPVC Pipes (as per ASTM D – 1785 sch-80 ) of approved make For Pumping line from ( Sump Tank To Over head Tank) complete with all necessary (ASTM D – 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) 50 mm nominal outer dia pipe
85
-
-
... More
18.18.2 : Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:20 mm nominal bore
38
-
-
... More
18.18.3 : Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:25 mm nominal bore
14
-
-
... More
od189973/2024_2025 : Providing and Fixing Ball Valves (Brass) of approved quality, High or low pressure, with plastics floats complete:50 mm Brass ball valve
4
-
-
... More
od189974/2024_2025 : Providing and Fixing Ball Valves (Brass) of approved quality, High or low pressure, with plastics floats complete:40mm nominal bore
4
-
-
... More
od189975/2024_2025 : Providing and Fixing Ball Valves (Brass) of approved quality, High or low pressure, with plastics floats complete:32mm nominal bore
21
-
-
... More
od189976/2024_2025 : Providing, Fixing at site in position CI Butterfly valve (PN 16) wafer type of approved make with necessary PVC flanges, gaskets, nuts and bolts etc complete within position as per drawings.65 mm Butterfly valve
1
-
-
... More
od189977/2024_2025 : Providing, Fixing at site in position CI Butterfly valve (PN 16) wafer type of approved make with necessary PVC flanges, gaskets, nuts and bolts etc complete within position as per drawings.50 mm Butterfly valve
3
-
-
... More
18.19.3.2 : Providing and fixing gun metal non-return valve of approved quality (screwed end):40 mm nominal boreVertical
2
-
-
... More
18.19.4.2 : Providing and fixing gun metal non-return valve of approved quality (screwed end):50 mm nominal boreVertical
3
-
-
... More
od190058/2024_2025 : Providing,Fixing,testing and commissioning at site GI Slotted Rail Brackets,hangers,supports with necessary drilling holes to suit the pipe clamps, deburring etc.,as per detailed drawing for supporting soil, waste & rain water pipes & water supply pipes in shafts with suitable GI clamps,bolts,anchor bolts nuts & washers fixed on shaft walls/outer walls etc.The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 1.6mm thick confirmed to IS 1239 etc.,complete as directed by the employer.Electro Galvanized (In shaft and dry interior areas)
80
-
-
... More
od190059/2024_2025 : Providing, Fixing, testing and commissioning at site Puddle Flange fabricated from Upvc ASTM Grade sch-40 pipes & uPVC sheet (600 mm long) 40MM
3
-
-
... More
od190060/2024_2025 : Providing, Fixing, testing and commissioning at site Puddle Flange fabricated from Upvc ASTM Grade sch-40 pipes & uPVC sheet (600 mm long)50mm
4
-
-
... More
od190061/2024_2025 : Providing, Fixing, testing and commissioning at site Puddle Flange fabricated from Upvc ASTM Grade sch-40 pipes & uPVC sheet (600 mm long) 110mm
1
-
-
... More
External drainage
-
-
-
... More
2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
80
-
-
... More
2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
40
-
-
... More
50.18.9.9.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2
185
-
-
... More
od190918/2024_2025 : Providing and Laying of pipes and conveying to position; cleaning, laying and jointing to true lines and gradients, PVC pipe of IS 4985(6kg/cm2) including jointing the pipe as per specification, testing the pipe line after installation all per provisions of IS: 1742-1983 (Code of practice for building drainage) complete.160 mm dia 6Kgf/cm2
25
-
-
... More
od190998/2024_2025 : Constructing brick masonry manhole in cement mortar 1:4 (1 cement:4 coarse sand) with RCC top slab with 1:2:4 mix(1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement:4 coars sand:8graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4(1 cement:2 coarse sand :4 graded stone aggregate 20mm nominla size) finished with a floating coat of neat cement complete as per standard design.Inside size 60x60 cm and up to 1 meter deep including D.I. cover with frame (Heavy duty) 600*600 mm internal diameter, total weight of cover and frame to be not less than 62 kg .
12
-
-
... More
od190999/2024_2025 : Constructing brick masonry manhole in cement mortar 1:4 (1 cement:4 coarse sand) with RCC top slab with 1:2:4 mix(1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement:4 coars sand:8graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4(1 cement:2 coarse sand :4 graded stone aggregate 20mm nominla size) finished with a floating coat of neat cement complete as per standard design.Inside size 45x45 cm and up to 1 meter deep including D.I cover with frame (Heavy duty) 450*450 mm internal diameter, total weight of cover and frame to be not less than 115 kg .
2
-
-
... More
19.4.1.2 : Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:100x100 mm size P typeWith Sewer bricks conforming to IS: 4885
2
-
-
... More
19.4.2.2 : 150x100 mm size P typeWith sewer bricks conforming to IS:4885
2
-
-
... More
od191462/2024_2025 : Providing and fixing Ductile Iron (Hinged Type) cover and frame. 600X600mm size 22kg wt for Overhead Tank
4
-
-
... More
19.7.1.2 : Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weigh of cover 23 kg and weight of frame 15 kg):With Sewer bricks conforming to IS : 4885
2
-
-
... More
od191751/2024_2025 : Drilling with core cutting machine in RCC beams, slabs floors etc., for laying pipes and rendering the same in RCC 1:2:4,finishing the same to the satisfaction of the Owner or his authorized representative etc., including nominal reinforcement wherever required, complete. The quoted rate shall also include for providing (conbextra GP -2/GP – 10) based water proofing compound for sealing the joints around the pipes. (Slab Thickness – 10cm / 12cm) 65MM
20
-
-
... More
od191752/2024_2025 : Drilling with core cutting machine in RCC beams, slabs floors etc., for laying pipes and rendering the same in RCC 1:2:4,finishing the same to the satisfaction of the Owner or his authorized representative etc., including nominal reinforcement wherever required, complete. The quoted rate shall also include for providing (conbextra GP -2/GP – 10) based water proofing compound for sealing the joints around the pipes. (Slab Thickness – 10cm / 12cm)RCC Slabs (For Wash Basin, EWC & Floor Trap)125MM
110
-
-
... More
PUMP AND ACCESSORIES
-
-
-
... More
od191800/2024_2025 : Providing, Fixing, testing and commissioning Automatic Tank Filling system with 2 ( 1W+ 1S) Nos Surface Mounting Monoblock pumpset with Ci impeller ,Ci :Motor Casing ,. Each pump capable to deliver 3.2 lps@ 42 mtr Head ( maxi head range 50 mtr ) and with 2.2kw/ 3 hp / 1ph, . A Wall Mounting control panel for pumps operate the pumpset as 1 working + 1 Standby according to the demand, level controller with Dry Run Protection, Overload protection, float switch/ Sensors for automatic operation ,etc . The entire system to be supplied with all the pump sets and automatic pump controller <br>Delivery Pipe Size to be provided : 40 MM
1
-
-
... More
od191802/2024_2025 : "Supplying and fixing of Borewell /tube well submerssible pump with panel, with CI construction, CI impeller complete with motor, base plate, foundation bolts, nuts, pressure guage and all accessories. and working with 415V, 3ph and 50 Hz frequency along with pump protection starter with in built level controller for automatic operation of pumpset using float switch , The panel should have LCD screen showing Voltage / Ampere, Error log , Cascading operation , Pump run status , Auto faulty pump change over, Auto- Manuel selection etc . The panel should protect the pumpset from over and under voltage , over and under load, dry protection , Phase reversal protection , Single phase prevention etc including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer-in-Charge at all levels<br>Capacity : 7m3/hr<br>Head : 110 m"<br>
1
-
-
... More
od191803/2024_2025 : Supplying and fixing of centrifugal pump, with CI construction, CI impeller complete with motor, base plate, foundation bolts, nuts, pressure guage and all accessories. and working with 415V, 3ph and 50 Hz frequency. along with pump protection starter with in built level controller for automatic operation of pumpset using float switch , The panel should have LCD screen showing Voltage / Ampere, Error log , Cascading operation , Pump run status , Auto faulty pump change over, Auto- Manuel selection etc . The panel should protect the pumpset from over and under voltage , over and under load, dry protection , Phase reversal protection , Single phase prevention etc <br>Capacity : 15 m3/hr<br>Head : 17 m
2
-
-
... More
od191805/2024_2025 : Fixing, testing and commissioning at site Automatic Dewatering system having 2 nos (1w+1s) Vertical Bottom suction submersible pump Having CI: body / Ci: impeller / SS : shaft . Each pump should be capable to deliver 3 lps @ 8mtr , having 0.75 kw /1hp / 3phase motor . A wall mounting micro controlled automatic control panel should be provided for the working of pumpset as 1w+1s in cascading operation . The control panel should have LCD screen showing Voltage , Ampere , Pump running status , error logs, faulty pump indication etc. The panel should protect the pumpset from over and under voltage , over and under load , dry run<br>, etc . Automatic operation of pumpset should be with float switch.(deliver pipeline size : 50mm )(Basement Pit )
3
-
-
... More
od191806/2024_2025 : Supplying, fixing, testing and commissioning of Booster system with variable frequency drive.(HNS). The system shall comprises of pump, precharged pressure tank, pressure switch etc., complete with electric motor at 1500 RPM 415V 3Ph 50 Hz required duty conditions mounted on common base plate and wiring from panel to the motor including air volume controls, etc., complete.
1
-
-
... More
od191813/2024_2025 : GREASE TRAP WITH COVER 500 LTR
1
-
-
... More
THEATRE INTERIOR WORKS
APPENDIX-1 JOINERY
-
-
-
... More
9.136 : Providing and fixing fire resistant door frame of section 143x57 mm having built in rebate made out of 16 SWG G.I. sheet ( zinc coating not less than 120 gm/ sqm) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer -in-charge (Dash fastener to be paid for separately ).
4.95
-
-
... More
od183826/2024_2025 : Providing and fixing of Fully Insulated Non Metalic Fire cum Acoustic Wooden fire doors as per IS 3614:2021, for 120 minutes integrity & insulation. The door is manufactured made out of thoroughly seasoned hard wood. The moisture content of wood material used at the time of construction of wooden composite fire door sets comprises of both frame and shutter shall not be more than 15% approx. in accordance with IS 287. The offered door must carry acoustic properties certification test evidence. To achieve Acoustic prooperties, the shutter thickness should be minimum 77mm. Door and frame should be factory finished with fire retardent primer FR880. All accressesories like hardware, vision panel, fire seal etc to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021. Every door must carry a label confirming to type of door & its fire rating.Door frame shall be Single rebate profile of section 140 x 90 mm made out of Ivory Coast ( 2nd Class )having density of 550-600 kg/m3 with factory made groove of suitable size so as to accomodate Fire seal of size 20x4mm An EPDM seal also to be provided in the frame to check spread of smoke.The frame must be primed with Fire retardant primer FR880 .Wooden shutter must be of minimum 77mm of thickness finished with 6mm thick commercial ply on both faces. The Shutter should be provided with 6mm thick commercial ply along with 1mm thick laminate on both faces . The composite thickness of the core insulation will be 63mm consists of minimum 10mm thick Calcium Silicate boards of Hilux / Pamtech make and treated wool Insulation material . The calcium silicate board must have Density not more than 900kg/m3 , having thermal conductivity 0.15W/mK . The shutter should be provided with heat activated intumescent fire seal strip of size 20mm x 4 mm mounted in the suitable grooves all three sides except bottom provided on Exposed OR concealed wooden lipping . The NABL accredited lab certificate shall be produced.The rate shall include Supply & fixing of SS Ball Bearing Hinges of size 100 x 89 x 3mm complete with SS Screws - 04 No. Per leaf, Door Closer- 01 No. Per Leaf, Triple point Panic Bar - 01 No. Per Leaf, Panic Trim- 01 No. Per Leaf, Vision Panel 200x300 with 6mm thick FR Glass,Fire seal of size 20x4mm FAS 20*4, Accoustic Seal IS1212, Door Bottom seal RP8Si 870mm, HRD Fastners of Hilti Make for Fixing of Frame along with Sims and Hole Plugs, labour charges etc. complete at all levels as directed by Engineer-in-charge<br>Double Leaf Door with frame (Size : 150 x 210 cm)
4
-
-
... More
9.137 : Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS : 3614 (Part - II), tested and certified as per laboratory approved by Engineer-in-Charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer -in-charge ( panneling to be paid for separately).
1.58
-
-
... More
10.27.1 : Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide P A 6 grade sleeve, including drilling of hole in frame, concrete/masonry, etc. as per direction of Engineer-in-charge.10 x 60 mm
4
-
-
... More
9.138.1 : Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge with glass of required thickness having 60 minutes of fire resistance both integrity & radiation control (EW60) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm.With clear fire resistant glass panes 6 mm thick of approved brand, having minimum 60 minutes fire resisitance
1.58
-
-
... More
od185783/2024_2025 : Supply and installation of ABS Door (Acrylonitrile Butadiene Styrene Doors) with frame made of Foamed PVC Polystyrene Frame of 110x40mm, Mortise lockset with SS 304 handle with privacy / keyed function, 4 Nos SS 304 Door hinges 100mm x 75mm x3mm in each panel, 2 ball bearing button tipped SS304, Surface mounted door closer EN size 2-4. The Frame would be fixed to masonry wall using Anchor fastners The gap between wall and frame to be filled with Silicon of approved make with 35 mm thick shutter fabricated with front and back panels consisting of ABS SHEETof thickness 1.35mm fused with deco film of thickness 0.15mm . The shutter frame is made with solid PURPLE PVC BAR of section size 32/35mm and thermally bonded with high temperature on all four corners. The internal portion is filled with Tubular core board and pressed with high pressure ABS SHEETS on both sides with Architraves 58x15mm/6x12mm on external and internal sides respectively of approved finish and colour including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge <br>Single Door (Size:85 x 210cm)<br>Purchase Price for SS Mortice Lock with privacy / keyed function : Rs.2960/ Each (Excluding GST ).
1
-
-
... More
od185786/2024_2025 : Supply and installation of ABS Door (Acrylonitrile Butadiene Styrene Doors) with frame made of Foamed PVC Polystyrene Frame of 110x40mm, Mortise lockset with SS 304 handle with privacy / keyed function, 4 Nos SS 304 Door hinge 100mm x 75mm x3mm in each panel, 2 ball bearing button tipped SS304, Surface mounted door closer EN size 2-4. The Frame would be fixed to masonry wall using Anchor fastners The gap between wall and frame to be filled with Silicon of approved make with 35 mm thick shutter fabricated with front and back panels consisting of ABS SHEETof thickness 1.35mm fused with deco film of thickness 0.15mm . The shutter frame is made with solid PURPLE PVC BAR of section size 32/35mm and thermally bonded with high temperature on all four corners. The internal portion is filled with Tubular core board and pressed with high pressure ABS SHEETS on both sides with Architraves 58x15mm/6x12mm on external and internal sides respectively of approved finish and colour including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge <br>Single Door (Size:75 x 210cm)<br>Purchase Price for SS Mortice Lock with privacy / keyed function : Rs.2960/ Each (Excluding GST ).
5
-
-
... More
od186581/2024_2025 : Supply and installation of ABS Door (Acrylonitrile Butadiene Styrene Doors) with frame made of Foamed PVC Polystyrene Frame of 110x40mm, Mortise lockset with SS 304 handle with privacy / keyed function, 4 Nos Door hinges 100mm x 75mm x3mm in each panel, 2 ball bearing button tipped SS304, Surface mounted door closer EN size 2-4. The Frame would be fixed to masonry wall using Anchor fastners The gap between wall and frame to be filled with Silicon of approved make with 35 mm thick shutter fabricated with front and back panels consisting of ABS SHEETof thickness 1.35mm fused with deco film of thickness 0.15mm . The shutter frame is made with solid PURPLE PVC BAR of section size 32/35mm and thermally bonded with high temperature on all four corners. The internal portion is filled with Tubular core board and pressed with high pressure ABS SHEETS on both sides with Architraves 58x15mm/6x12mm on external and internal sides respectively of approved finish and colour including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge <br>Single Door (Size: 90 x 210cm)<br>Purchase Price for SS Mortice Lock with privacy / keyed function : Rs.2960/ Each (Excluding GST ).
2
-
-
... More
od186582/2024_2025 : Supply and installation of ABS Door (Acrylonitrile Butadiene Styrene Doors) with frame made of Foamed PVC Polystyrene Frame of 110x40mm, Mortise lockset with SS 304 handle with privacy / keyed function, 4 Nos SS 304 Door hinges 100mm x 75mm x3mm in each panel, 2 ball bearing button tipped SS304, Surface mounted door closer EN size 2-4. The Frame would be fixed to masonry wall using Anchor fastners The gap between wall and frame to be filled with Silicon of approved make with 35 mm thick shutter fabricated with front and back panels consisting of ABS SHEETof thickness 1.35mm fused with deco film of thickness 0.15mm . The shutter frame is made with solid PURPLE PVC BAR of section size 32/35mm and thermally bonded with high temperature on all four corners. The internal portion is filled with Tubular core board and pressed with high pressure ABS SHEETS on both sides with Architraves 58x15mm/6x12mm on external and internal sides respectively of approved finish and colour including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge <br>Single Door (Size : 100 x 210 cm)<br>Purchase Price for SS Mortice Lock with privacy / keyed function : Rs.2960/ Each (Excluding GST ).
1
-
-
... More
od186583/2024_2025 : Supply and installation of ABS Door (Acrylonitrile Butadiene Styrene Doors) with frame made of Foamed PVC Polystyrene Frame of 110x40mm, Deadbolt cylinder with escutcheons, SS 304 grade Pull Handle 300x22 mm, 4 Nos SS 304 Door hinges 100mm x 75mm x3mm in each panel, 2 ball bearing button tipped SS304, Surface mounted door closer EN size 2-4, The Frame would be fixed to masonry wall using Anchor fastners The gap between wall and frame to be filled with Silicon of approved make with 35 mm thick shutter fabricated with front and back panels consisting of ABS SHEETof thickness 1.35mm fused with deco film of thickness 0.15mm . The shutter frame is made with solid PURPLE PVC BAR of section size 32/35mm and thermally bonded with high temperature on all four corners. The internal portion is filled with Tubular core board and pressed with high pressure ABS SHEETS on both sides with Architraves 58x15mm/6x12mm on external and internal sides respectively of approved finish and colour including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge<br>Double Door (Size : 120 x 210 cm)<br>Purchase Price for Deadbolt cylinder with escutcheons : Rs.2106/ Each (Excluding GST ).
1
-
-
... More
od186584/2024_2025 : Supply and installation of ABS Door (Acrylonitrile Butadiene Styrene Doors) with frame made of Foamed PVC Polystyrene Frame of 110x40mm, Deadbolt cylinder with escutcheons, SS 304 grade Pull Handle 300x22 mm, 4 Nos SS 304 Door hinges 100mm x 75mm x3mm in each panel, 2 ball bearing button tipped SS304, Surface mounted door closer EN size 2-4, The Frame would be fixed to masonry wall using Anchor fastners The gap between wall and frame to be filled with Silicon of approved make with 35 mm thick shutter fabricated with front and back panels consisting of ABS SHEETof thickness 1.35mm fused with deco film of thickness 0.15mm . The shutter frame is made with solid PURPLE PVC BAR of section size 32/35mm and thermally bonded with high temperature on all four corners. The internal portion is filled with Tubular core board and pressed with high pressure ABS SHEETS on both sides with Architraves 58x15mm/6x12mm on external and internal sides respectively of approved finish and colour including cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge<br>Double Door (Size : 150 x 210 cm)<br>Purchase Price for Deadbolt cylinder with escutcheons : Rs.2106/ Each (Excluding GST ).
1
-
-
... More
od186585/2024_2025 : Providing and fixing insulated fire rated GI Sheet doors conforming to FD 120-I 30 classification of IS 3614 :2021 with fire rating of 120 minutes integrity and 30 minutes insulation as per the drawing. The factory manufactured door frame and shutter assembly shall be made out of minimum 1.20 mm thick GI Sheet with minimum 120 GSM coating as per IS: 277. Door and frame should be finished with powder coating in standard RAL shade finish having DFT of minimum 30 microns. The door should carry a minimum 500 Hrs of salt spray test. All Required accessesories like hardware, vision panel,panic bar, fire & smoke seal etc to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021.Every door must carry a label confirming to type of door & its fire rating.The Door frame shall be single rebate grooved profile of size minimum 100mm x 57mm made out of 1.20mm (18gauge) minimum thick galvanized steel sheet.Door leaf should be minimum 46mm thick fully flush double skin door. Door leaf must be manufactured from 1.2mm(18gauge) thick galvanised steel sheet. The infill material shall be mineral wool of minimum density 48 kg/cum. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For double leaf doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. The NABL accredited lab certificate shall be produced.The rate shall include cost and conveyance of all materials, Fittings, labour charges etc. complete at all levels as directed by Engineer-in-charge<br>Door Size : 120 x 225 cm
2
-
-
... More
APPENDIX 2 FLOORING
-
-
-
... More
11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
155.36
-
-
... More
od186591/2024_2025 : CARPET FLOORING: Supply and installation of nylon carpets of approved make with carpet tile Multi-Level Pattern Loop, Ecosolution Q100™ Nylon, 100% Solution Dyed, Machine Gauge '1/12 in, Face weight ( Moss of the fibre ) 16-18 oz/yd², Total Thickness 5 to 6 mm, Pile Density 6500 to 9000 oz/yd³, Tile size 46 cm x 91 cm or 61 cm x 61 cm. The construction of the carpet to be multi-level pattern loop, Backing Structure Ecoworx® Tile 100% PVC Free Backing, Soil/Stain protection SSP® Shaw Soil Protection, Life-Cycle Carbon Emissions Carbon Neutral, Embodied Carbon (Cradle to Gate) 4.6 kg CO₂/m², Recycled content 52% Recycled Content, Cradle to Cradle Certified® | Silver Level (Version 3.1), Indoor Air Quality CRI Green Label Plus (GLP) | GLP2671, Environmental Product Declaration (EPD) 3rd Party Certified in Accordance with ISO14044, ISO14025 & EN15804, Radiant Panel (Astm E648) Class I, Nbs Smoke Less Than 450, Electrostatic Propensity Less Than 3.5 kv, Cri Green Label Plus (Glp) GLP2671, Pill Test Passes Methenamine Pill Test by 16 CFR Part 1630 (FF-1-70, Ada Compliance >0.6, Meets the recommended static coefficient of friction for ADA walking surfaces and accessible routes.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels and necessary provision shall be given for providing lighted row plate on both sides as directed by Engineer-in-charge
256.1
-
-
... More
od186592/2024_2025 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete <br>Size of Tile 1200x1200 mm
172.52
-
-
... More
11.46.2 : Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
7.04
-
-
... More
11.39 : Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
153.68
-
-
... More
8.31 : Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622
(thickness to be specified by the manufacturer), of approved make, in all colours,
shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge,
in skirting, risers of steps and dados, over 12 mm thick bed of cement
mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @
3.3kg per sqm, including pointing in white cement mixed with pigment of matching
shade complete.
404.51
-
-
... More
APPENDIX -3 CEILING
-
-
-
... More
12.53 : Providing and Fixing 15 mm densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture spintone /cosmos /Hexa or equivalent of size 595x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main 'T' runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross "T" of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main 'T' of size 24 x 28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main'T' at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross 'T' of length 600 mm and size 24x28 mm made of 0.33 mm thick (minimum) sheet to be inter locked at middle of the 1200x600 mm panel to from grid of size 600x600 mm, resting on periphery walls/partitions on a Perimeter wall angle pre-coated steel of size (24x24x3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture (Spintone / Cosmos/hexa) in the grid, including cutting / making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever require. Main 'T' runners to be suspended from ceiling using G.I slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size of 85x30x0.8 mm, spaced at 1200mm centre to centre along main 'T' bottom exposed with 24 mm of all T- sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by by engineer-in-charge. Note:- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The calcium silicate ceiling tiles shall have NRC. value of 0.50 (Minimum), light reflection 85% non - combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/m 0 KC.
28.88
-
-
... More
od186595/2024_2025 : Supply and installation of Acoustical Wall Panel of approved make with square edges made of fibre glass substrate 25mm thick, wrapped on the front side with an acoustically transparent fabric as per the approved shade (Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut and Shell). The panel shall be classified for Fire Class A, as per ASTM E-84. The Acoustical Wall Panel shall be of sizes 600x600mm (Nominal) or 600x1200mm (Nominal) and shall achieve an NRC of 0.85 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) with 50mm airgap as per ASTM C423 to be fixed to wall on a framework of wooden battens and using Wall panel Impalers (supplied by the manufacturer) or by using construction adhesives (as per the instructions laid down by the manufacturer). The fibre glass substrate shall have a recycle content of 85%.The rate shall include cost and conveyance of all materials, labour charges etc. complete at all levels as directed by Engineer-in-charge.The rate for wooden battens shall be measured in the realevent item.
207.48
-
-
... More
od186596/2024_2025 : Supply of of Mineral Fibre Acoustical Suspended Ceiling System with Optra Black 15mm thick board edge 15/90 Edge Tiles with 15mm face exposed grid. The tiles shall have smooth laminated visual with Humidity Resistance (RH) of 95%, NRC 0.85 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, CAC of 25db as per ASTM E1414, Thermal Conductivity λ = 0.040 W/mK, Colour Black, Fire Performance of class A2-s1, d0 according to EN 13501-1 with 15mm board edge in module size of 600 x 1200mm. The scrim on the face of the tile shall be cleanable and classified as ISO 14644-1 cleanroom class 5. It shall be suitable for Green Building application, with Recycled content of 43% and VOC Emissions (French) class of A+. The tile shall have Environmental Product Declaration as per ISO 14025 and EN 15804+A2. The tile shall have certifications from GRIHA and GreenPro thereby confirming that it is an environment friendly product.<br> The tile shall be laid on 24 mm wide T - section flanges colour black (matching to tile color) having roll formed double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm (all sections). The deflection loading of the system shall be 7.5 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 8.5kg/m. The end details of the cross tee shall be made of pre hardened steel and fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T Sections shall be made of hot dipped galvanized steel of 90 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability. The Tile & Grid system used together shall carry a 5 year warranty against manufacturing defect and manufacturer shall provide a warranty certificate. The Tile & Grid shall have the manufacturers name embossed/printed on it. The supply shall be backed by a Manufacturing Test Certificate.<br>SUSPENSION SYSTEM consist of accessories manufactured and supplied by approved manufacturer consisting of M6 Anchor Fasteners with hanger hole, pre–Straightened Hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum loading strength of 110 kgs from the RCC slab / Structural ceiling. Additionally, adjustable hook clips made of 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline wire to be used for level adjustment during installation purpose in main runners. The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.
212.18
-
-
... More
12.45.1 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1
120.54
-
-
... More
od186597/2024_2025 : Providing & Fixing Wooden finished Suspended Ceiling System with Woodworks Microlook edge tiles and 15mm Suprafine 38 or 43 exposed grid. The 18mm thick Plain Tile shall be made of Medium Density Fibre of density 700+ Kgs/m3. The tile shall have melamine laminate finish of approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut) on visible side and backing laminate (same shade) on the reverse with 0.8mm matching PVC edge banding in module size of 600mm x 600mm. The edges of the tile shall be Square Tegular/Microlook 90˚ having 8mm using 3mm thick compact board spline. The tile shall have Humidity Resistance (RH) of 70%, with sag limited to 1/300mm. The tile shall have a Fire Performance of class 1 according to BS 476 part 7. The tile shall be laid on Suprafine 38/Suprafine 43 with 15 mm wide T - section flanges having double stroke rotary stitching on all T - sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38 or 43mm (all sections) as per manufacturers reccomendation. The deflection loading of the system shall be 12.5-15.6 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360 within suspension points) with deflection loading of 15.5 - 18.6kg/m2. The end details of the main beam and cross tee shall be made of pre hardened steel clip fixed to the ends. The cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T - Sections shall be made of hot dipped galvanized steel of 100 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.
13.25
-
-
... More
12.52.3 : Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.12.5 mm thick square edge PVC Laminated Gypsum Tile size 595x595 mm made of Gypsum plasterboard , manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyster on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyster film so as to make the tile a completely sealed unit.
193.62
-
-
... More
APPENDIX-3 FINISHING WORKS
-
-
-
... More
13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
611.02
-
-
... More
13.85.3 : Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With water thinnable cement primer on walls surface having VOC content less than 50 grams / litre
611.01
-
-
... More
13.83.2 : Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.Two coats
611.01
-
-
... More
od186614/2024_2025 : Providing, Making, Supply & Installation Push Back Theatre Chair with cup holder shall have common armrest with fire retardant double weave quality fabric of approved make of size 70 cm width , 60 cm height and 110cm backrest height . The chair seat/back have high desity 50Kg/m3 moulded polyurethane foam of special grade complete with upholstery for ultimate comfort. Quilting pattern & design will be final after workshop drawing/ sample given by manufacture supplier. The chair frame shall be made in 18 gauge sheet metal fabricated single or double plate stand the same shall be fitted to the framed platform. The push back (sliding set) mechanism shall be smooth & silent operation. Each chair have approved seat number plate .
142
-
-
... More
od186615/2024_2025 : Supply and installation of 12mm thick High pressure laminated (HPL) partition of size 450mm(D) x 1190mm(H) Fixed on wall with the help of SS grade 316 brackets including cost and conveyance of all materials, labour charges,tool rental charges, lead,lift etc complete as directed by Engineer-in-Charge at all levels.
5
-
-
... More
APPENDIX-4 CARPENTARY WORKS
-
-
-
... More
od186616/2024_2025 : Providing and fixing Storage Cabinets as per drawing made out of 18 mm thick Pre- laminated flat pressed 3 layer ( medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked. The fixing accessories shall be powder coated aluminum channels to bear for smooth movement, PVC guide etc and shall be fixed with necessary fittings wherever required and 2mm edge lipping finish on exposed edges along with necessary accessories such as brush finish SS 304 handles, etc complete as per directions of Engineer-in-charge.The rate shall include the cost & conveyance of all materials, labour charges,levelling, lead, lift , cutting any shapes , provisions for electrical, networking fixtures wherever required, etc complete as directed by Engineer in Charge at all levels.
19.37
-
-
... More
od186621/2024_2025 : Providing & fixing 19 mm thick BWP grade ply confirming to IS- 710 on existing MS frame work / block work using approved size screws at every 600 mm center to center at all levels, flat surface and 300mm as per drawing.The ply shall be fixed in correct line and level as per drawing. The rate shall include the cost & conveyance of all materials, labour charges,levelling, lead, lift , cutting any shapes , provisions for electrical, networking fixtures wherever required, etc complete as directed by Engineer in Charge at all levels.
256.1
-
-
... More
od186620/2024_2025 : Providing & fixing 12 mm thick BWP grade ply confirming to IS- 710 on existing MS frame work / block work using approved size screws at every 600 mm center to center at all levels as per drawing.The ply shall be fixed in correct line and level as per drawing. The rate shall include the cost & conveyance of all materials, labour charges,levelling, lead, lift , cutting any shapes , provisions for electrical, networking fixtures wherever required, etc complete as directed by Engineer in Charge at all levels.
207.48
-
-
... More
APPENDIX -5 PANELLING WORK
-
-
-
... More
od186624/2024_2025 : Providing and fixing 20mm thick brick stone cladding of approved,quality and material of matt/glossy finish over finished surfaces of walls using approved qulaity adhesive in all heights and levels as per the approved drawings and direction of Engineer-In-Charge. The exposed surface shall be finished with 100% Aliphatic Polyurethane (PU) coating. Sample shall be approved prior to procurement. The rate includes all material,labour, scaffolding etc all complete
23.87
-
-
... More
APPENDIX -6 STEEL WORKS
-
-
-
... More
10.16.3 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Electric resistance or induction butt welded tubes
7328.83
-
-
... More
13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
260.35
-
-
... More
od186642/2024_2025 : Fabrication and installation of seating and stage platforms at various heights using MS angle sections of sizes 50x50x6mm, 40x40x6mm, and 25x25x6mm. The sections are to be fabricated and welded together as per the drawing, with the structure anchored to the floor using chemical anchors. For the platform floor, 19mm BWP plywood is to be used. A 40x25x3mm MS box section will also be used as back support for the double-layered plywood floor. All welding joints must be well-finished by grinding and filling with metal putty. The rate includes painting the steel sections with two coats of high-quality black epoxy paint over a coat of epoxy primer, after scraping and sanding the fabricated steel. The plywood platform shall be measured under realevent item. The rate includes all material,labour, scaffolding etc all complete
8836.5
-
-
... More
APPENDIX-7 OTHER WORKS
-
-
-
... More
od186643/2024_2025 : Supply and installation of Theatre silver screen GL-MG 2.2 Mirage 2.2 with LENSRAY as per drawing with necessary framing work.The rate is inclusive of all fixing accessories, installation cost etc complete. Framework shall be measured under relevant item and paid seperately.
1
-
-
... More
od186644/2024_2025 : Supply and installation of Filter Tea & Coffee Vending Machine with Milk Warmer of dimension 720 x 450 x 615 mm of 8-10 cups per minute dispensing rate with following specification of approved make.<br>Maximum electricty -Load 3Kw<br>Digital counter for individual drinks<br>Food grade stainless steel milk boiler upto 10Lts capacity<br>Brewing capacity for decoction 250 gms <br>
1
-
-
... More
od186645/2024_2025 : Supply and installation of electric Popcorn Maker with following specifications of approved make.<br>Bowl size : 200 - 250 g<br>Weight - 17kg<br>Dimension - 22 x 16 x 29 cm
1
-
-
... More
od186646/2024_2025 : Fabrication and installation of Stainless steel Hot display food counter dimensions 1200 mm length x 600 mm width and 1200 mm height as per the design & drawing and following specifications of approved make. <br>Material of Body- Stainless Steel 304<br>Material of Shelves- Stainless Steel 304<br>Material of Top Shelf- 20 mm Granite Black<br>Material of Visibility Glass -8mm Toughened Glass<br>Metal Surface Finish- Polish
1
-
-
... More
LIFT
-
-
-
... More
od191671/2024_2025 : "Design, fabrication, supply of electric traction type with machine roomless type, Stainless steel 15Passenger (1020Kg) elevator (including freight & landing charges ,insurance and all applicable taxes and duties in country of origin and in India etc.without GST) and type suitable for operation on 415 V ± 10%, 3 phase , 50 Hz AC supply, having AC variable voltage and variable frequency micro-processor type traction control, speed of 1.00 Mtr/sec ,electromagnetic brake system, Duplex mode operation, operating panel with luminous buttons, over load warning indicator, battery operated alarmbell, LED type emergency light, intercom suitable for hook upto Purcahsers's EPABX, infrared ray sensing door protection for full height, reverse phase relay on controller, fireman’s switch at initial landing floor, LCD/LED car positions and direction indication in car and landings and at all floors with UP/DOWN direction, shaft wiring and lighting with accessories, braille buttons, Automatic Rescue Device (ARD) with dry maintenance free sealed batteries,Safe landing device and Battery Operated Emergency Rescue Device and all electrical components with wiring from the single point power supply provided at top landing near the elevator door audio announcement along with prerecorded message as approved by Engineer-in-Charge. The drives of elevator shall meet the requirements of IEEE 519/2014. The PMSM traction motor( IE3 or better efficiency) of machine roomless elevator shall be of gearless type and placed inside the elevator hoistway complete as per technical specification. Having automatic side opening Glass door, stainless steel car enclosure provided with stainless steel handrails on two sides as applicable in accordance of following details 6 stops & 6 openings and entrance & exit at same side and suitable for travel height of 15.75 mtrs. (Shaft Size 2000mm (width) x 2500mm (depth) ) with door opening of 900mm (width) and 2000 mm (height) . complying with the net inside car area as per IS14665 part 3/1) and door opening of 900mm (width) and 2000mm (height). The equipment should be BMS compatible and shall haveprovision for CCTV installation . All electrical components with wiring from the single point power supply provided in last landing near the elevator door. All fabrication and procedures shall confirm to relevant IS<br>standards and complete in all respects as per technical specifications"
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%