Kerala State Housing Board Tender

od330963/2021_2022 : Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520 Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminum sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads 2280 lpm at 70 m Head.

od330964/2021_2022 : Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads. 2280 lpm at 70 m Head

CONTROL PANEL

od331047/2021_2022 : Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor<br>cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth<br>terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump &<br>diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required. Incomings 400A, 50kA 4 Pole MCCB, Ics=100% Icu Rating<br>Digital Voltmeter 0-500V with selector switch Ammeter (0-400 A) with selector swtich & CTs etc.<br>LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 500Amps, Outgoings<br>( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps) Main Fire Pumps 125 Amp, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. - 2 sets, Jockey Pump 63 Amp, 50kA TPN MCCB, Ics=100% Icu, with Suitable<br>HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. - 2 sets, Diesel Engine Control Control for diesel engine comprising - Automatic/Manual selctor switch & 3 attempts starting<br>device, timers and relays as required, push buttons, start/stop in manual mode<br>Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication<br>Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0- 20 A DC Ammeter

AIR CUSHION VESSEL

od331051/2021_2022 : Supply, installing, testing and commissioning of Air cushion<br>vessel made of mild steel of 150mm dia with automatic air release cock,25mm dia drain valve and shutt off.The vessel shall be 100cm in height etc. Complete.

PRESSURE GAUGE & PRESSURE SWITCH

od331064/2021_2022 : Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.

od331065/2021_2022 : Supply, installation, testing and commissioning of Pressure<br>Gauge with required range/capacity.

BUTTERFLY VALVES

od331107/2021_2022 : Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 80 mm dia

od331108/2021_2022 : Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 100 mm dia

od331109/2021_2022 : Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 150 mm dia

NON RETURN VALVES

od331311/2021_2022 : Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 80mm dia

od331312/2021_2022 : Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 100mm dia

od331313/2021_2022 : Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 150mm dia

BALL VALVES

od331329/2021_2022 : Supplying, installing, testing and commissioning of Cast iron Ball valves with fittings of screwed end type. 20 mm Dia

od331330/2021_2022 : Supplying, installing, testing and commissioning of Cast iron Ball<br>valves with fittings of screwed end type. 25 mm Dia

MS PIPES

od331472/2021_2022 : Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 150 mm dia

od331473/2021_2022 : Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 100 mm dia

od331474/2021_2022 : Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 80 mm dia

od331475/2021_2022 : Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 65 mm dia

od331476/2021_2022 : Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 50 mm dia

od331477/2021_2022 : Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 40 mm dia

od331478/2021_2022 : Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 32 mm dia

od331479/2021_2022 : Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 25 mm dia

UNDERGOUND PIPE

od331503/2021_2022 : Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 100 mm. Dia

INTERNAL HYDRANT VALVE

od331508/2021_2022 : Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal

SHORT BRANCH PIPE

od331514/2021_2022 : Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Gun metal

FIRST AID HOSE REEL

od331524/2021_2022 : Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30 m

AIR RELEASE VALVE

od331605/2021_2022 : Supply, installation, testing and commissioning of single acting<br>Air Release Valve with screwed inlet 15 mm dia etc.

FIRE BRIGADE INLET

od331679/2021_2022 : Supply, fabricating, testing and commissioning of Fire Brigade<br>Inlet connection with 4 nos of 63 mm dia. built - in NRV instantaneous coupling type .etc.

SPRINKLERS

od331680/2021_2022 : Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories Upright Sprinkler

od331681/2021_2022 : Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories Pendent Sprinkler

FIRE ALARM SYSTEM

od331682/2021_2022 : Supply, Installation, testing and commissioning of Smoke Detector as per standard specification.

od331683/2021_2022 : Supply, installing, testing and commissioning of Main Fire alarm control panel of 8 zones capacity, with visual LED indications for fire / fault alarms, signals and should have stage alarm facility. The panel shall be fabricated by M.S. sheet and powder coated both inside & out side, door shall be glass fronted type with locking arrangement, as per specification.

od331684/2021_2022 : Supply, installation, testing and commissioning of Electronic Hooter as per standard specification.

od331685/2021_2022 : Supply, Installation, testing and commissioning of Manual Call Point break glass type as per standard specification.

90.6.4.1 : Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.1.00 sq.mm 1 Run

1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

FIRE EXTINGUISHERS

od331687/2021_2022 : Supplying, and fixing of ABC type fire extinguisher of 4 Kgs.<br>Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, discharge hose, wall mounting bracket etc. complete,

FIRE SIGNAGES

od331688/2021_2022 : Supplying and fixing in position self glowing "Fire Assembly Point" sign boards made of luminescent safely, rigid sheet in green colour, photo luminescent with two hanging chains & necessary supports to hang it on ceiling.

od331689/2021_2022 : Supplying and fixing in position self glowing "FIRE EXIT" &"EXIT" sign<br>boards made of luminescent safely, rigid sheet in green colour, photo luminescent with two hanging chains & necessary supports to hang it on ceiling.

od331690/2021_2022 : Supplying and installing in position LED "FIRE DUCT " sign boards of size (180 X 300 mm) . Samples has to approved by the Architect before procuring the same.

TWO WAY TALK BACK SYSTEM

od331691/2021_2022 : Supply, laying, testing and commissioning of 4 Core X 1 Sqmm PVC sheathed, flexible, FRLS copper armored cables of following size for detectors with necessary clamps and spacer saddles etc.

od331692/2021_2022 : Supply, Installation, Testing and Commissioning of 6W wall mounted type speakers with talk back facility, in CRCA sheet fabricated housing, complete with switch.

od331693/2021_2022 : Supply, Installation, Testing and Commissioning of Micro-processor based talk back announcing console suitable for selecting 6 zones, having keypad for zone selection, LED indication & gooseneck mirophone for making announcements including TB switching unit complete in all respect to commission the project.

AIR RELEASE VALVE

od331605/2021_2022 : Supply, installation, testing and commissioning of single acting<br>Air Release Valve with screwed inlet 15 mm dia etc.

APPROVALS

od331695/2021_2022 : Final NOC including drawings and scheme ( Only Processing fee, Chellan fees at Fire Dept and all other unexpected expense will be billed upon proper channel<br>communication)