Kerala State Housing Board Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 2,00,000Document Cost
₹ 12,390Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_KSHB_643421_2Bid Award Id
ViewTender No
2023_CE_KSHB_20(Ele)_1(Re)Tender Authority
Kerala State Housing Board ViewPurchaser Address
-Website
http://http://www.kshb.kerala.gov.in/kshb/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C
270
-
-
1.11 : Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
25
-
-
1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire
13520
-
-
1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
17368
-
-
1.14.3 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire
27560
-
-
1.17.3 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm
8100
-
-
1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm
2400
-
-
1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
6400
-
-
od157660/2023_2024 : Supply and Installation of 25mm PVC Cason and Cap
150
-
-
1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch
25
-
-
1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch
190
-
-
1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet
1190
-
-
1.25 : Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
253
-
-
1.26 : Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
200
-
-
1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)
25
-
-
1.27.4 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)
95
-
-
1.28.1 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.1 or 2 Module
5
-
-
1.28.2 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.3 Module
5
-
-
1.28.3 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.4 Module
500
-
-
1.28.4 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.6 Module
5
-
-
90.4.5.2 : Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.
253
-
-
1.49 : Numbering of ceiling fan / exhaust fan/ fluorescent fittings as required.
253
-
-
1.47 : Supplying and fixing extra down rod of 10 cm length G.I. pipe, 15 mm dia, heavy gauge including painting etc. as required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
253
-
-
1.55.1 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group A
50
-
-
1.31 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in
recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps
modular switch, connection etc. as required. (For light plugs to be used in non residential
buildings).
145
-
-
1.44 : Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard
length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc.
as required.
253
-
-
1.56 : Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light plugs to be used in non residential buildings).
237
-
-
5.6 : Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
12
-
-
5.11 : Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
5
-
-
5.14 : Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
5
-
-
5.15 : Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
20
-
-
7.1.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. mm
120
-
-
7.1.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 35 sq. mm and upto 95 sq. mm
190
-
-
7.1.4 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 185 sq. mm and upto 400 sq. mm
490
-
-
7.8.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
4405
-
-
7.8.2 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
150
-
-
7.8.3 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
500
-
-
7.8.4 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)
400
-
-
8.1.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 120 sq. mm and upto 400 sq. mm
150
-
-
9.1.21 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm)
28
-
-
9.1.22 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm)
8
-
-
9.1.24 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 95 sq. mm (45mm)
8
-
-
9.1.25 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 120 sq. mm (45mm)
14
-
-
9.1.27 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)
10
-
-
9.1.29 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 240 sq. mm (62mm)
12
-
-
9.1.30 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 300 sq. mm (70mm)
12
-
-
9.1.31 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 400 sq. mm (82mm)
24
-
-
9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)
48
-
-
9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)
136
-
-
9.1.34 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm)
26
-
-
90.12.7.28 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required..3.5 core 35 sq mm
with factory made clamp
650
-
-
90.12.7.29 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 50 sq mm
with factory made clamp
160
-
-
90.12.7.31 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 50 sq mm
with factory made clamp
180
-
-
90.12.7.32 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 120 sq mm
320
-
-
90.12.7.34 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required..3.5 core 185 sq mm
180
-
-
90.12.7.35 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 240 sq mm
160
-
-
90.12.7.36 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.d.3.5 core 300 sq mm
240
-
-
90.12.7.37 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required..3.5 core 400 sq mm
540
-
-
90.12.7.40 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with
factory made clamp
1300
-
-
90.12.7.41 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with
factory made clamp
1900
-
-
90.12.7.42 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 25 sq mm with
factory made clamp
675
-
-
90.16.1.3 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required 3.15 mm copper conductor ( 10 SWG)
1250
-
-
90.16.1.4 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG)
100
-
-
90.16.3.9 : Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run))25 x 3 mm copper strip
650
-
-
5.8 : Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth
electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required.
(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
260
-
-
DB
-
-
-
2.3.1 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator6 way, Double door
1
-
-
2.3.2 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door
5
-
-
2.4.1 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)4 way (4 + 12), Double door
11
-
-
2.4.2 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 way (4 + 18), Double door
9
-
-
2.4.3 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)8 way (4 + 24), Double door
6
-
-
2.5.1 : Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required .(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)4 way (4 + 12), Double door
2
-
-
2.5.2 : Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required .(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)8 way (4 + 24), Double door
5
-
-
2.5.3 : Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required .(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)12 way (4 + 36), Double door
1
-
-
2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
600
-
-
2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole
40
-
-
2.11 : Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
100
-
-
2.13.1 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
41
-
-
2.13.2 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps
8
-
-
2.13.3 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.100 amps
2
-
-
2.14.1 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps
1
-
-
2.14.2 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
5
-
-
2.14.3 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps
1
-
-
2.15.1 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps
1
-
-
2.15.2 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
11
-
-
2.15.3 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps
1
-
-
2.21 : Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2
mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
10
-
-
2.22 : Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2
mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
10
-
-
2.23.1 : Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with testing and commissioning etc. as required. 2For 6 way, Double door SPN MCBDB
5
-
-
2.23.2 : Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with testing and commissioning etc. as required. 2For 8 way, Double door SPN MCBDB
5
-
-
CABLE AND ALLIED WORKS
-
-
-
4.6.1 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.100 mm width X 50 mm depth X 1.6 mm thickness
Details of cost for 30 metres
180
-
-
4.6.3 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.225 mm width X 50 mm depth X 1.6 mm thickness
490
-
-
4.6.4 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.300 mm width X 50 mm depth X 1.6 mm thickness
60
-
-
4.6.5 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.375 mm width X 50 mm depth X 2.0 mm thickness
130
-
-
4.6.6 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.450 mm width X 50 mm depth X 2.0 mm thickness
60
-
-
4.6.14 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.600 mm width X 75 mm depth X 2.0 mm thickness
30
-
-
4.6.15 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.750 mm width X 75 mm depth X 2.0 mm thickness
20
-
-
4.7.1 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends " ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.100 mm width X 50 mm depth X 1.6 mm thickness
12
-
-
4.7.3 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends " ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.225 mm width X 50 mm depth X 1.6 mm thickness
14
-
-
4.7.5 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends " ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.375 mm width X 50 mm depth X 2.0 mm thickness
6
-
-
4.7.6 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends " ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.450 mm width X 50 mm depth X 2.0 mm thickness
6
-
-
4.7.14 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends " ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.600 mm width X 75 mm depth X 2.0 mm thickness
1
-
-
4.7.15 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends " ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.750 mm width X 75 mm depth X 2.0 mm thickness
1
-
-
4.8.1 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.100 mm width X 50 mm depth X 1.6 mm thickness
10
-
-
4.8.3 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.225 mm width X 50 mm depth X 1.6 mm thickness
30
-
-
4.8.4 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.300 mm width X 50 mm depth X 1.6 mm thickness
2
-
-
4.8.5 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.375 mm width X 50 mm depth X 2.0 mm thickness
2
-
-
4.8.6 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.450 mm width X 50 mm depth X 2.0 mm thickness
2
-
-
4.10.1 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Reducer" ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.100 mm width X 50 mm depth X 1.6 mm thickness
60
-
-
4.10.3 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Reducer" ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.225 mm width X 50 mm depth X 1.6 mm thickness
32
-
-
4.10.4 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Reducer" ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.300 mm width X 50 mm depth X 1.6 mm thickness
4
-
-
4.10.5 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Reducer" ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.375 mm width X 50 mm depth X 2.0 mm thickness
4
-
-
4.10.6 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Reducer" ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.450 mm width X 50 mm depth X 2.0 mm thickness
3
-
-
4.10.14 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Reducer" ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.600 mm width X 75 mm depth X 2.0 mm thickness
2
-
-
4.10.15 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Reducer" ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.750 mm width X 75 mm depth X 2.0 mm thickness
1
-
-
LIGHT FIXTURES AND ACCESSORIES
-
-
-
od159515/2023_2024 : Supply installation,testing and Commissioing of LILO weather proof cable termination box.
27
-
-
od159516/2023_2024 : Installation, testing and commissioning of twin type aviation obstruction light suitable for 100W neon spiral lamp with mounted glass red top and aluminum base equivalent to aluminum neon of aluminum neon(GEC).
1
-
-
15.1 : Supplying,Installation, testing and commissioning of Passive Infrared (PIR) technology based occupancy sensor having high preformance, non regulating programmable type, suitable for connected load upto 10 Amp, for mounting height up to 2.8 Mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming and site etc. complete as required
1
-
-
od173950/2023_2024 : Erection of Street Light in Poles for Car parking area with beam angle 120 Deg,110/100w 6500k <br>
2
-
-
od173951/2023_2024 : Installation, testing and commissioning of metallic street light pole of length 3 meter with 1mtr double arm in cement concrete 1:3:6 foundation as per working drawings . height including 32mm dia PVC pipes for cable incoming and outgoing to the cable junction box including cable entry box<br>
3
-
-
od173952/2023_2024 : Erection and commissioning of metallic street light pole of length 3 meter with 1mtr single arm in cement concrete 1:3:6 foundation with cement concrete collar of size 0.5 m dia x 0.75 m height including 32mm dia PVC pipes for cable incoming and outgoing to the cable junction box including cable entry box<br>
4
-
-
od159517/2023_2024 : Supply Installation, testing and commissioning fixing of junction box made of FRP, weather proof having 1 no 6A SP MCB 15A-4 way Bakelite connector etc. complete as required (For street light and compound wall lighting)
3
-
-
od159518/2023_2024 : Supply Installation, testing and commissioning of Street Light ,65w 6500k, 120 Deg beam angle. The rate shall include fixing of 32 mm dia X 2.00 meter long G.I. Pipe (medium class) bracket for mounting of fluorescent /LED street light fitting on pole/walls including bending the pipe to the required shape and 2 Nos. 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required .
37
-
-
od159519/2023_2024 : Supply receiving unloading, shifting, storing, installation,testing and Commissioing of Recessed MOUNTED LED LIGHT FIXTURE , 28W 2FT x 2FT, 5700 k, WITH GLARE RATIO 19-22 (LT - F02857RI00 FULL LIT ULTRA 28W OR EQUIVALENT) .Rate shall be inclusive of necessary support materials for hanging the light fixure with SS chain or equivalent.
145
-
-
od159521/2023_2024 : Supply receiving unloading, shifting, storing, installation,testing and Commissioing of Surface munted LED Down Light Fixture 12w
125
-
-
od174073/2023_2024 : Supply receiving unloading, shifting, storing, installation,testing and Commissioing of 30W Recessed Clean Room Fixture - 2FT x 2FT with IP66 .Rate shall be inclusive of necessary support materials for hanging the light fixure with SS chain or equivalent.
18
-
-
od159522/2023_2024 : Supply receiving unloading, shifting, storing, installation,testing and Commissioning of Surface mounted LED Down Light Fixture 15w
520
-
-
od159523/2023_2024 : Supply receiving unloading, shifting, storing, installation,testing and Commissioing of bulk head fittings with 9watt LED bulb in lift well case using necessary accessories and giving connection etc. as required.
24
-
-
od159524/2023_2024 : Supply receiving unloading, shifting, storing, installation,testing and Commissioing of 20w LED tube lights
880
-
-
od159525/2023_2024 : Supply receiving unloading, shifting, storing, installation,testing and Commissioing of 40W Flood Lights
10
-
-
od159526/2023_2024 : Supply receiving unloading, shifting, storing, installation,testing and Commissioing of 20W BULKHEAD
10
-
-
od159527/2023_2024 : Supply receiving unloading, shifting, storing, installation,testing and Commissioing of 6W INDICATION LAMPS
5
-
-
HT SUPPLY
-
-
-
90.12.1.25 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).
150
-
-
od159497/2023_2024 : Supply and providing emergency OFF push button with key in suitable metallic enclosure as required.
1
-
-
od159498/2023_2024 : Supply and providing end termination of the above HT cable including all materials required for firm joints.<br>Outdoor type
1
-
-
od159499/2023_2024 : Supply and providing end termination of the above HT cable including all materials required for firm joints.Indoor type
2
-
-
od159500/2023_2024 : Supply, installation, Testing & commissioning of outdoor type 12KV 25KA 3S 630A busbar RMU with IN and OUT 630A SF6/VCB's(2nos.) and ONE no. 630A SF6/VCB outgoing feeder, complete with surge protection as specified and as shown on drawings in line KSEB / Consumer requirements
1
-
-
od159501/2023_2024 : Supply, installation and testing of out door type 11kV Metering Panel with CT/PT unit having 3 nos.CT 60/5A, class of accuracy 0.2S, 15VA burden, 1no.PT 11KV/110V, class 0.2 accuracy, 100VA burden, duly tested, terminals prewired from CT & PT for connecting TOD meter.
1
-
-
od159502/2023_2024 : Supply, installation and testing of TOD meter for KSEB (0.2S accuracy class, 3ph 4 wire, DLMS compatible) test terminals etc. all prewired, tested in the TMR section of KSEB and as per recommendations and fixing in the metering panel complete as required.
1
-
-
lIGHTNING PROTECTION SYSTEM
-
-
-
od159546/2023_2024 : Providing and fixing Fully Solid Vertical Air terminals for wind stability as<br>per IS/IEC -62305 part-3 For 1,2,3, 4<br>meter air terminal 16mm rod tapered to 10 mm aluminium rod meter rod:<br>For 6, 8 meter 40mm rod tapered to 16mm and then to 10mm<br>Meets the requirement (IS/IEC 62305)<br>Semi-hard (E-AlMgSiO5) Suitable for high wind load.<br>All air terminal must have Interception Tip at the Top of air terminal.<br>Air terminal Joining Clip Stainless Steel SS 304 clamp required to connect<br>horizontal air termination to vertical air termination;Lightning tested for 100 KA<br>10/350 micro sec waveform. This is required if using 17 KG stone supports.<br>Stainless Steel Wall Clamp or 17 KG stone of 365 mm diameter, high level of<br>stability is required to mount 1,2,3,4 meters. No of concrete stones/wall clamps<br>depending on wind load needs to be considered. For<br>6 & 8 meter air terminalfor mounting: tripod stand or 3 nos & 4 nos respectively<br>wall clamp will be required to withstand heavy wind load. Govt approved<br>Indian labs test certificate required.<br>3 meter air terminal with Interception Tip mounted on Stainless Steel Wall<br>Clamp mounting accessories
5
-
-
od159547/2023_2024 : Providing and fixing Fully Solid Vertical Air terminals for wind stability as<br>per IS/IEC -62305 part-3 For 1,2,3, 4<br>meter air terminal 16mm rod tapered to 10 mm aluminium rod meter rod:<br>For 6, 8 meter 40mm rod tapered to 16mm and then to 10mm<br>Meets the requirement (IS/IEC 62305)<br>Semi-hard (E-AlMgSiO5) Suitable for high wind load.<br>All air terminal must have Interception Tip at the Top of air terminal.<br>Air terminal Joining Clip Stainless Steel SS 304 clamp required to connect<br>horizontal air termination to vertical air termination;Lightning tested for 100 KA<br>10/350 micro sec waveform. This is required if using 17 KG stone supports.<br>Stainless Steel Wall Clamp or 17 KG stone of 365 mm diameter, high level of<br>stability is required to mount 1,2,3,4 meters. No of concrete stones/wall clamps<br>depending on wind load needs to be considered. For<br>6 & 8 meter air terminalfor mounting: tripod stand or 3 nos & 4 nos respectively<br>wall clamp will be required to withstand heavy wind load. Govt approved<br>Indian labs test certificate required.<br>3 meter air terminal with Interception Tip mounted on Concrete Stone &<br>Stainless Steel mounting accessories
4
-
-
od159548/2023_2024 : Providing and fixing Fully Solid Vertical Air terminals for wind stability as<br>per IS/IEC -62305 part-3 For 1,2,3, 4<br>meter air terminal 16mm rod tapered to 10 mm aluminium rod meter rod:<br>For 6, 8 meter 40mm rod tapered to 16mm and then to 10mm<br>Meets the requirement (IS/IEC 62305)<br>Semi-hard (E-AlMgSiO5) Suitable for high wind load.<br>All air terminal must have Interception Tip at the Top of air terminal.<br>Air terminal Joining Clip Stainless Steel SS 304 clamp required to connect<br>horizontal air termination to vertical air termination;Lightning tested for 100 KA<br>10/350 micro sec waveform. This is required if using 17 KG stone supports.<br>Stainless Steel Wall Clamp or 17 KG stone of 365 mm diameter, high level of<br>stability is required to mount 1,2,3,4 meters. No of concrete stones/wall clamps<br>depending on wind load needs to be considered. For<br>6 & 8 meter air terminalfor mounting: tripod stand or 3 nos & 4 nos respectively<br>wall clamp will be required to withstand heavy wind load. Govt approved<br>Indian labs test certificate required<br>4 meter air terminal with Interception Tip mounted on Stainless Steel Wall<br>Clamp mounting accessories
4
-
-
od159549/2023_2024 : Providing and fixing Fully Solid Vertical Air terminals for wind stability as<br>per IS/IEC -62305 part-3 For 1,2,3, 4<br>meter air terminal 16mm rod tapered to 10 mm aluminium rod meter rod:<br>For 6, 8 meter 40mm rod tapered to 16mm and then to 10mm<br>Meets the requirement (IS/IEC 62305)<br>Semi-hard (E-AlMgSiO5) Suitable for high wind load.<br>All air terminal must have Interception Tip at the Top of air terminal.<br>Air terminal Joining Clip Stainless Steel SS 304 clamp required to connect<br>horizontal air termination to vertical air termination;Lightning tested for 100 KA<br>10/350 micro sec waveform. This is required if using 17 KG stone supports.<br>Stainless Steel Wall Clamp or 17 KG stone of 365 mm diameter, high level of<br>stability is required to mount 1,2,3,4 meters. No of concrete stones/wall clamps<br>depending on wind load needs to be considered. For<br>6 & 8 meter air terminalfor mounting: tripod stand or 3 nos & 4 nos respectively<br>wall clamp will be required to withstand heavy wind load. Govt approved<br>Indian labs test certificate required.<br>4 meter air terminal with Interception Tip mounted on Concrete Stone &<br>Stainless Steel mounting accessories
8
-
-
od159550/2023_2024 : Providing & fixing of 8mm solid aluminium round conductor with necessary<br>holders @ required interval as specified below: Meets the requirement of<br>(IS/IEC 62305) : semi-hard (E-AlMgSiO5 )with 50 sq.mm cross sectional area.<br>Govt approved Indian labs test certificate required.<br>Conductor with Parapet Holder made of whether resistant plastic holder @<br>every 0.5 meters
405
-
-
od159551/2023_2024 : Providing & fixing of 8mm solid aluminium round conductor with necessary<br>holders @ required interval as specified below: Meets the requirement of<br>(IS/IEC 62305) : semi-hard (E-AlMgSiO5 )with 50 sq.mm cross sectional area.<br>Govt approved Indian labs test certificate required<br>Conductor with Down Conductor Holder made of whether resistant plastic<br>holder @ every 0.75 meters
405
-
-
od159552/2023_2024 : Providing & fixing of 8mm solid aluminium round conductor with necessary<br>holders @ required interval as specified below: Meets the requirement of<br>(IS/IEC 62305) : semi-hard (E-AlMgSiO5 )with 50 sq.mm cross sectional area.<br>Govt approved Indian labs test certificate required.Conductor with Terrace Conductor Fibre Reinforce Concrete holder @ every<br>0.75 meters
75
-
-
od159553/2023_2024 : Providing and fixing of Cross Connector/T Connector/Folding Clamp/Clamping<br>Shoe/ Expansion Piece: to route vertical down conductor /mesh formation<br>made of Aluminium Ferrule using screw free joints. Folding Clamp/Clamping<br>Shoe for metal panels (up to 20mm thickness of the metal frame): Folding<br>clamp/clamping shoe for metal frame thickness up to 20mm, made of stainless<br>steel SS 304/316 grade , conforms to the requirements according to (IS/IEC<br>62305). Expansion piece with connector: For equalising temperature related<br>length changes. Necessary on conductors length at every 20 meters<br>horizontally. Using round conductor 8mm aluminium conductor with straight<br>Connector: using Aluminium Ferrule. Quick installation using crimp joints.<br>Conforms to the requirements according to (IS/IEC 62305). Make sure all joints<br>are strong and will be inspected at site. Galvanised Iron joints are not<br>permitted to avoid risk of corrosion. Single bolt joints are not permitted to<br>avoid risk of faulty loose joints and reduce risk of flash over. Govt approved<br>Indian labs test certificate required. Make: Cape
120
-
-
od159554/2023_2024 : Providing and fixing of Stainless Steel Test Joint suitable with suitable<br>Outdoor Enclosure: For 8mm dia solid round aluminium conductor & 10mm<br>dia copper coated solid steel round conductor having 100 microns of copper<br>bonding . Conforms to the requirements according to (IS/IEC 62305).The<br>enclosure should be outdoor glass-fibre reinforced polycarbonate opaque<br>having minimum inner dimension of 75mm x 75 mm x 50 mm. The test link has<br>to be straight and needs minimum 4 mounting screws for strong joints.<br>Inspection of bimetallic corrosion at site required. Seperation of 8mm<br>Aluminium & 10mm Copper bonded steel is required for future inspection and<br>contractor has to make sure both conductors should not touch eachg other to<br>avoid bimetallic corrosion. Single bolt joints are not permitted. Govt approved<br>Indian labs test certificate required. Make: Cape
29
-
-
od159555/2023_2024 : Providing and laying copper coated steel solid round conductor 10mm<br>diameter from earth electrode directly in ground as required. copper coated<br>steel, high corrosion resistant. Meets the requirement of (IS/IEC 62305) copper<br>coating thickness of 100microns Should be tested and use exclusively for<br>lightning protection earthing system and ring equipotential bonding. After test<br>link needs to be routed inside Heavy duty conduit to avoid touch potential till<br>ground level. Govt approved Indian labs test certificate required. Make: Cape
420
-
-
od159556/2023_2024 : Installation of Exothermic Weld Joints for 10mm round copper bonded steel<br>conductor having 100 microns as per IS/IEC 62305. Each under ground joints<br>has to be wrapped with petrolatum- coated chemical fibre fabric having<br>1.1mm thick and width 50mm. Govt approved Indian labs test certificate<br>required.
34
-
-
od159557/2023_2024 : Providing and fixing of maintenance free Earthing system comprises of<br>molecularly bonded copper of 99.9% purity on low carbon steel of min 3048mm<br>length (10 feet), having a diameter of 20mm with copper bonding thickness of<br>250 microns as per UL 467. The Rod has to be either continuous or with self-<br>coupling peg & bore arrangement with fault current withstand capability of 30<br>KA rms value for 1 second and I peak of 76 KA. The rod must be having<br>corrosion test, peel off test for uniform coating, 180 degree bend test with out<br>peeloff of copper bonding. Exothermic welded Clamp for clamping as<br>suggested as per NBC 2016. Ordinary Stainless steel/Copper alloy universal<br>clamps are not recommended. For self coupling peg & bore arrangement rod<br>needs Impact point on the bottom rod for easy insertion. Earth enhancing<br>mineral compound is used for improving the soil conductivity. The material<br>shall be mineral inert to sub soil and shall not pollute the environment and<br>non corrosive to earth rod. The material should have a resistivity less than 0.2<br>Ωm. It should be free from hazardous substances. The mineral compound is<br>required to have minimum 17.5 Kg of the total composite. The compound<br>should be chemically inert and needs to submit Govt approved Indian labs test<br>certificate. FRP Earth electrode inspection chamber FRP Earth electrode<br>inspection chamber with weight bearing capacity of 60KN. The dimension<br>shall be 290mmx 290mmx 209mm. Govt approved Indian labs test certificate
2
-
-
Electrical Non-DSR Items
-
-
-
od160750/2023_2024 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)<br>12 way (4 + 36), Double door
11
-
-
od160751/2023_2024 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.<br>25 A<br>
2
-
-
od160752/2023_2024 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.<br>40 A<br>
26
-
-
od160753/2023_2024 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.<br>63 A<br>
6
-
-
od160754/2023_2024 : Supply and installation of GI ceiling trunking ( double compartment type )with cover.The rate shall including suitable supports as per standards. The raceways base shall be minimum 1.2 mm thickness and the cover shall be minimum 1mm thickness 75X50 mm wide<br>
60
-
-
od160755/2023_2024 : Supply and installation of GI ceiling trunking ( double compartment type )with cover.The rate shall including suitable supports as per standards. The raceways base shall be minimum 1.2 mm thickness and the cover shall be minimum 1mm thickness 100X50 mm wide<br>
280
-
-
od160756/2023_2024 : Supply and installation of GI ceiling trunking ( double compartment type )with cover.The rate shall including suitable supports as per standards. The raceways base shall be minimum 1.2 mm thickness and the cover shall be minimum 1mm thickness 150X50 mm wide<br>
220
-
-
od160757/2023_2024 : Supply and installation of GI ceiling trunking ( double compartment type )with cover.The rate shall including suitable supports as per standards. The raceways base shall be minimum 1.2 mm thickness and the cover shall be minimum 1mm thickness 200X50 mm wide<br>
80
-
-
od160758/2023_2024 : Supply and installation of GI ceiling trunking ( double compartment type )with cover.The rate shall including suitable supports as per standards. The raceways base shall be minimum 1.2 mm thickness and the cover shall be minimum 1mm thickness 300X50 mm wide<br>
20
-
-
od160759/2023_2024 : Supplying and fixing in position MS tray fabrication supports/hangers/runners etc. The rate shall include cutting, welding, grinding, anchoring to RCC slabs/walls etc.in an approved manner as per detailed specification, complete as required. The rate quoted shall be including the 2coat primmer & 2 coat blank ennamel paniting
1000
-
-
od160760/2023_2024 : Earthing with cast iron. earth plate 1200 mm X 1200 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
10
-
-
od160761/2023_2024 : Supplying & laying / fixing of earthing conductor of copper strips/wires including crimpping of strips/ wires using appropriate legs, including necessary earthing trenches, jointing as per IS:3043/87 in trenches, walls, pulling through pipes, etc Earth benches 300mm length (using 25X3mm cu strip)
10
-
-
od160762/2023_2024 : Supplying & laying / fixing of earthing conductor of copper strips/wires including crimpping of strips/ wires using appropriate legs, including necessary earthing trenches, jointing as per IS:3043/87 in trenches, walls, pulling through pipes, etc Copper Green Yellow 1C x 70 sqmm
150
-
-
od160763/2023_2024 : Supply,Laying,Installation & Testing of XLPE insulated PVC sheathed 1.1kV grade Cu. cables for the following sizes. The cable shall be laid in excavated trench/ built up trench/ exsiting cable tray / pulling through existing pipes/clamped on to the walls using necessary fixing accessories and identification tags.<br>5 x 6 sq.mm<br>
480
-
-
od160764/2023_2024 : Supply of all materials and carrying out cable end terminations for the following cables using single compression brass Cu. cable gland,compression type aluminium crimping lugs, gland earthing of adequate size, etc. complete.<br>5 x 6 sq.mm<br>
60
-
-
od160765/2023_2024 : Supply , installation , testing and commissioning of multistrand flexible FRLS and PVC insulated Cu Cables with end terminations. Cables shall be laid through existing cable tray or trench with proper supports in every 1mtr with proper identification tags in every 3meter with route marking and other identification details.<br>3 X 35 sq.mm ( FOR FIRE PUMP )
20
-
-
od160766/2023_2024 : Supply , installation , testing and commissioning of multistrand flexible FRLS and PVC insulated Cu Cables with end terminations. Cables shall be laid through existing cable tray or trench with proper supports in every 1mtr with proper identification tags in every 3meter with route marking and other identification details.<br>3 X 6 sq.mm ( FOR JOCKEY FIRE PUMP )
20
-
-
od160767/2023_2024 : Supply , installation , testing and commissioning of multistrand flexible FRLS and PVC insulated Cu Cables with end terminations. Cables shall be laid through existing cable tray or trench with proper supports in every 1mtr with proper identification tags in every 3meter with route marking and other identification details.<br>4C x 2.5 sqmm
150
-
-
od160768/2023_2024 : Supply , installation , testing and commissioning of multistrand flexible FRLS and PVC insulated Cu Cables with end terminations. Cables shall be laid through existing cable tray or trench with proper supports in every 1mtr with proper identification tags in every 3meter with route marking and other identification details.<br>3C x 2.5 sqmm
250
-
-
od160769/2023_2024 : Supply , installation , testing and commissioning of multistrand flexible FRLS and PVC insulated Cu Cables with end terminations. Cables shall be laid through existing cable tray or trench with proper supports in every 1mtr with proper identification tags in every 3meter with route marking and other identification details.<br>2C x 4 sqmm <br>
10
-
-
od160770/2023_2024 : Supply installation testing and commissioning of MCCBs with<br>suitable enclousures, the Rating of Isolators are as follows:320A 65kA TPN MCCB (Icu=Ics (1sec) with ELR, built in over<br>current and short circuit releases suitable for 415 Volts
1
-
-
od173957/2023_2024 : Supply installation testing and commissioning of MCCBs with suitable enclousures, the Rating of Isolators are as follows:<br>"250A 65kA TPN MCCB (Icu=Ics (1sec) with ELR, built in over<br>current and short circuit releases suitable for 415 Volts"<br>
1
-
-
od160771/2023_2024 : Supply installation testing and commissioning of MCCBs with<br>suitable enclousures, the Rating of Isolators are as follows:100A 65kA TPN MCCB (Icu=Ics (1sec) with ELR, built in over<br>current and short circuit releases suitable for 415 Volts
1
-
-
od160772/2023_2024 : Supply installation testing and commissioning of Isolators with suitable weatherproof enclosures, the Rating of Isolators are as follows:160A, 4P, Isolator
2
-
-
od160773/2023_2024 : Supply installation testing and commissioning of Isolators with suitable weatherproof enclosures, the Rating of Isolators are as follows:125A, 4P, Isolator
1
-
-
od160774/2023_2024 : Supply installation testing and commissioning of Isolators with suitable weatherproof enclosures, the Rating of Isolators are as follows:100A, 4P, Isolator
1
-
-
od160775/2023_2024 : Supply installation testing and commissioning of Isolators with suitable weatherproof enclosures, the Rating of Isolators are as follows:80A, 4P, Isolator
2
-
-
od160776/2023_2024 : Supply installation testing and commissioning of Isolators with suitable weatherproof enclosures, the Rating of Isolators are as follows:63A, 4P, MCB Isolator
4
-
-
od160777/2023_2024 : Supply installation testing and commissioning of Isolators with suitable weatherproof enclosures, the Rating of Isolators are as follows:40A, 4P, MCB Isolator
10
-
-
od160778/2023_2024 : Supply installation testing and commissioning of Isolators with suitable weatherproof enclosures, the Rating of Isolators are as follows:32A, 4P, MCB Isolator
16
-
-
od160779/2023_2024 : Supply installation testing and commissioning of Isolators with suitable weatherproof enclosures, the Rating of Isolators are as follows:25A, 4P, MCB Isolator
11
-
-
od160780/2023_2024 : Supply & Applying of PU form in cable tray gaps / holes etc
0.25
-
-
od174315/2023_2024 : Liason & co-ordination with KSEB and Electrical Inspectorate for the submission and approval of installation drawings, inspection and approval of the installation under scope of the tender,co-ordiantion with KSEB , EI for commisioning the installation
1
-
-
GENERATOR and UPS
-
-
-
od159503/2023_2024 : Supply,Unloading, installation, testing and commissioning of 320KVA, 0.8pf, 3 phase 50c/s 415V comprising diesel engine, fuel tank, alternator, base plate, control panel with MCCB starting equipment exciter, home silencer and all necessary accessories etc. complete as required.
2
-
-
od159504/2023_2024 : Supply and laying of 8 inch dia B class exhaust line including thermal insulation using glass wool and aluminium cladding with flexible including bends, flanges, nut, bolt, packing and necessary supports.
15
-
-
od159505/2023_2024 : Supply,Instalation,testing and commisioning of 3 kVA 3Phase in Single Phase Out UPS for relay supply to MSB Panels including 4 Pole isolator in incomer and 6 Way SPN DB with 4 MCB in outgoing <br>
1
-
-
od173946/2023_2024 : Supply , Installation , testing and commissioning of 3 Phase In - 3 Phase Out modular ups having 150KVA frame loaded with 100KVA.loaded with 100KVA.(Technical Specification ref)
1
-
-
TRANSFORMER
-
-
-
od157714/2023_2024 : Supply,Unloading, installation, testing and commissioning of 500KVA,UNITIZED SUBSTATION with 11KV/433V, 3 phase, 50c/s transformer with OLTC having tappings from +5% to -15% in steps of 1.25%, Cu wound, AN cooled suitable for HT and LT cable boxes, indoor CAST RESIN TYPE distribution transformer with control panel, AVR, RTCC etc., including HT Metering cubicle High winding temperature trip relay,Earth fault relay,Restricted earth fault relay,Master trip relay and other accessories and fittings etc,conforming to the required standards.Ratio - 11/0.433kV, 50Hz, 3PhaseCapacity -500 kVA ( type)H.V side:- Cable end box suitable for 3 core x 300 sq.mm 11kV XLPE cable and suitable for air terminations.L.V side:- Cable end box suitable for connecting 3 x 3.5C x 400 sqmm XLPE Al Cable.1 set of three nos. Winding Temeperature Indicator on all the three phases and one set of oil temperature with Alarm and Trip contacts.
1
-
-
od157715/2023_2024 : Supply and installation of neutral CT of ratio 600/5A, class 5P10 15VA of accuracy for earth fault relay in a metalic enclosure including control wiring from the transformer.
1
-
-
PANEL
-
-
-
od157695/2023_2024 : Supply,Fabrication,unloading,installation, testing and commissioning of 800A automatic LT factory build and assembled panel board dust tight, vermin proof, floor mounted, free standing, cubicle construction for an automatic operation from KSEB to DG set and DG set to KSEB with the following:- The MSB panel shall be as per IEC 61439Incoming Section-I (incoming from 500kVA transformer )800A 50kA FP microprocessor based EDO type ACB with releases suitable for 415Volts - 1nos.Busbars800Amps continuous duty, 415Volts A/C for 3 phase and 50% for neutral Aluminium busbar with colour coded heat shrink sleeves supported on SMC type grip supports 80kA.Incomer Section-II(Incoming from 320kVA DG-1)630A 50kA FP microprocessor based EDO type ACB with releases suitable for 415Volts - 1nos.Incomer Section-II(Incoming from 320kVA DG-2)630A 50kA FP microprocessor based EDO type ACB with releases suitable for 415Volts - 1nos.Bus coupler800A 50kA FP EDO type ACB without releases suitable for 415Volts - 1nos.Auto load sharing and sensing between the generators using PLCOutgoings250A 50kA TPN MCCB 415 Volts - 2nos.400A 50kA TPN MCCB 415 Volts - 3nos.630A TPN MCCB 415 Volts - 3 no.630A TPN Isolator 415 Volts- 1 no.RS 485 communication port,the board shall be having bottom Busbars and top cable entry, front operated, dead back and fabricated out of 14SWG CR sheet, granule finish and powder coated with simens gray after phosphating.
1
-
-
od157696/2023_2024 : CAPACITOR PANEL (150 KVAR) Supply receiving unloading , shifting , storing , installation , testing and commissioning of 400A LT factory build and assembled panel board dust tight vermin proof floor mounted free standing cubicle construction with the following:-Incoming400A TPN isolator -1 no.(Bus bar of air insulated Aluminium, size as per ISS)Outgoing160A TP MCCB with 50KVAR Capacitor - 1 nos.80A TP MCCB with 25KVAR Capacitor - 2 nos.40A TP MCCB with 10KVAR Capacitor - 5nosPower contactors of double duty type suitable for capacitor switching with 50,25,25,10,10,10,10,10 in outgoings prewired with control circuits to improve the P.F automatically with micro processor based automatic power factor relay to fix the power factor at the desired value with a power factor meter in the incoming side. Ammeters(0-1000A),voltmeter(0- 500V),communication port for BMS phase indication lamps etc., in the incoming
1
-
-
od157697/2023_2024 : SUB PANEL<br>Supply,fabrication,unloading, installation, testing and commissioning of 630 A LT factory build and assembled panel board dust tight vermin proof floor mounted free standing cubicle construction with the following:-<br>Incoming<br>630 A TPN ISOLATOR - 1no<br>(Bus bar of air insulated Aluminum size as per ISS)<br>Outgoing<br>250A 25kA TPN MCCB Icu=Ics with thermal magnetic release set at suitable setting – 2 nos<br>125A 25kA TPN MCCB Icu=Ics with thermal magnetic release set at suitable setting – 2 nos<br>100A 25kA TPN MCCB Icu=Ics with thermal magnetic release set at suitable setting – 5 nos<br>Multi Function Digital Meter,Phase indication lamps etc., in the incoming and. Earth bus of adequate capacity and double earth connection to all switches, internal rigid connection. The board shall be fabricated out of 16 SWG CR sheet and powder coated.<br>
1
-
-
od157698/2023_2024 : UTILITY PANEL<br>Supply,fabrication,unloading, installation, testing and commissioning of 200 A LT factory build and assembled panel board dust tight vermin proof floor mounted free standing cubicle construction with the following:-<br>Incoming<br>200 A TPN ISOLATOR - 1no<br>(Bus bar of air insulated Aluminum size as per ISS)<br>Outgoing<br>100A 25kA TPN MCCB Icu=Ics with thermal magnetic release set at suitable setting – 5 nos<br>80A 25kA TPN MCCB Icu=Ics with thermal magnetic release set at suitable setting – 2 nos<br>63A 25kA TPN MCCB Icu=Ics with thermal magnetic release set at suitable setting – 1 nos<br>Multi Function Digital Meter,Phase indication lamps etc., in the incoming and. Earth bus of adequate capacity and double earth connection to all switches, internal rigid connection. The board shall be fabricated out of 16 SWG CR sheet and powder coated.<br>
1
-
-
od157699/2023_2024 : MAIN FLOOR PANEL<br>Supply,fabrication,unloading, installation, testing and commissioning of 630 A LT factory build and assembled panel board dust tight vermin proof floor mounted free standing cubicle construction with the following:-<br>Incoming<br>630 A TPN ISOLATOR - 1no<br>(Bus bar of air insulated Aluminum size as per ISS)<br>Outgoing<br>320A 25kA TPN MCCB Icu=Ics with thermal magnetic release set at suitable setting – 1 nos<br>200A 25kA TPN MCCB Icu=Ics with thermal magnetic release set at suitable setting – 1 nos<br>100A 25kA TPN MCCB Icu=Ics with thermal magnetic release set at suitable setting – 3 nos<br>80A 25kA TPN MCCB Icu=Ics with thermal magnetic release set at suitable setting – 4 nos<br>Multi Function Digital Meter,Phase indication lamps etc., in the incoming and. Earth bus of adequate capacity and double earth connection to all switches, internal rigid connection. The board shall be fabricated out of 16 SWG CR sheet and powder coated.<br>
1
-
-
od157700/2023_2024 : UPS O/P PANELSupply,fabrication,unloading, installation, testing and commissioning of 200 A LT factory build and assembled panel board dust tight vermin proof floor mounted free standing cubicle construction with the following:-Incoming200 A TPN ISOLATOR - 1no(Bus bar of air insulated Aluminum size as per ISS)Outgoing80A 25kA TPN MCCB Icu=Ics with thermal magnetic release set at suitable setting – 5 nos160A 25kA TPN MCCB Icu=Ics with thermal magnetic release set at suitable setting – 1 nosMulti Function Digital Meter,Phase indication lamps etc., in the incoming and. Earth bus of adequate capacity and double earth connection to all switches, internal rigid connection. The board shall be fabricated out of 16 SWG CR sheet and powder coated.
1
-
-
od157701/2023_2024 : SECOND FLOOR PANELSupply,fabrication,unloading, installation, testing and commissioning of 100 A LT factory build and assembled panel board dust tight vermin proof floor mounted free standing cubicle construction with the following:-Incoming80 A TPN ISOLATOR - 1no(Bus bar of air insulated Aluminum size as per ISS)Outgoing40A 16kA 4P MCB - 5 nos32A 16kA 4P MCB - 3 nosMulti Function Digital Meter,Phase indication lamps etc., in the incoming and. Earth bus of adequate capacity and double earth connection to all switches, internal rigid connection. The board shall be fabricated out of 16 SWG CR sheet and powder coated.
1
-
-
od157702/2023_2024 : THIRD FLOOR PANELSupply,fabrication,unloading, installation, testing and commissioning of 200 A LT factory build and assembled panel board dust tight vermin proof floor mounted free standing cubicle construction with the following:-Incoming160 A TPN ISOLATOR - 1no(Bus bar of air insulated Aluminum size as per ISS)Outgoing40A 16kA 4P MCB - 6 nos40A 16kA 4P MCB - 6 nos32A 16kA 4P MCB - 5 nosMulti Function Digital Meter,Phase indication lamps etc., in the incoming and. Earth bus of adequate capacity and double earth connection to all switches, internal rigid connection. The board shall be fabricated out of 16 SWG CR sheet and powder coated.
1
-
-
od157703/2023_2024 : UPS PANEL GFSupply,fabrication,unloading, installation, testing and commissioning of 100 A LT factory build and assembled panel board dust tight vermin proof floor mounted free standing cubicle construction with the following:-Incoming80 A TPN ISOLATOR - 1no(Bus bar of air insulated Aluminum size as per ISS)Outgoing40A 16kA 4P MCB - 6 nos32A 16kA 4P MCB - 1 nosMulti Function Digital Meter,Phase indication lamps etc., in the incoming and. Earth bus of adequate capacity and double earth connection to all switches, internal rigid connection. The board shall be fabricated out of 16 SWG CR sheet and powder coated.
1
-
-
od157704/2023_2024 : UPS PANEL 3FSupply,fabrication,unloading, installation, testing and commissioning of 100 A LT factory build and assembled panel board dust tight vermin proof floor mounted free standing cubicle construction with the following:-Incoming80 A TPN ISOLATOR - 1no(Bus bar of air insulated Aluminum size as per ISS)Outgoing40A 16kA 4P MCB - 2 nos32A 16kA 4P MCB - 5 nosMulti Function Digital Meter,Phase indication lamps etc., in the incoming and. Earth bus of adequate capacity and double earth connection to all switches, internal rigid connection. The board shall be fabricated out of 16 SWG CR sheet and powder coated.
1
-
-
od157705/2023_2024 : HVAC PANEL - GFSupply,fabrication,unloading, installation, testing and commissioning of 100 A LT factory build and assembled panel board dust tight vermin proof floor mounted free standing cubicle construction with the following:-Incoming80 A TPN ISOLATOR - 1no(Bus bar of air insulated Aluminum size as per ISS)Outgoing40A 16kA 4P MCB - 2 nos32A 16kA 4P MCB - 5 nos25A 16kA 4P MCB - 1 nosMulti Function Digital Meter,Phase indication lamps etc., in the incoming and. Earth bus of adequate capacity and double earth connection to all switches, internal rigid connection. The board shall be fabricated out of 16 SWG CR sheet and powder coated.
1
-
-
od157706/2023_2024 : HVAC PANEL - 3FSupply,fabrication,unloading, installation, testing and commissioning of 250 A LT factory build and assembled panel board dust tight vermin proof floor mounted free standing cubicle construction with the following:-Incoming250 A TPN ISOLATOR - 1no(Bus bar of air insulated Aluminum size as per ISS)Outgoing63A 16kA 4P MCB - 2 nos32A 16kA 4P MCB - 8 nosMulti Function Digital Meter,Phase indication lamps etc., in the incoming and. Earth bus of adequate capacity and double earth connection to all switches, internal rigid connection. The board shall be fabricated out of 16 SWG CR sheet and powder coated.
1
-
-
od157707/2023_2024 : HVAC PANEL - TFSupply,fabrication,unloading, installation, testing and commissioning of 100 A LT factory build and assembled panel board dust tight vermin proof floor mounted free standing cubicle construction with the following:-Incoming100 A TPN ISOLATOR - 1no(Bus bar of air insulated Aluminum size as per ISS)Outgoing32A 16kA 4P MCB - 8 nos25A 16kA 4P MCB - 5 nosMulti Function Digital Meter,Phase indication lamps etc., in the incoming and. Earth bus of adequate capacity and double earth connection to all switches, internal rigid connection. The board shall be fabricated out of 16 SWG CR sheet and powder coated.
1
-
-
od157708/2023_2024 : TERRACE FLOOR PANELSupply,fabrication,unloading, installation, testing and commissioning of 250 A LT factory build and assembled panel board dust tight vermin proof floor mounted free standing cubicle construction with the following:-Incoming250 A TPN ISOLATOR - 1no(Bus bar of air insulated Aluminum size as per ISS)Outgoing120A 25kA TPN MCCB Icu=Ics with thermal magnetic release set at suitable setting – 1 nos63A 16kA 4P MCB - 6 nos40A 16kA 4P MCB - 3 nosMulti Function Digital Meter,Phase indication lamps etc., in the incoming and. Earth bus of adequate capacity and double earth connection to all switches, internal rigid connection. The board shall be fabricated out of 16 SWG CR sheet and powder coated.
1
-
-
od157709/2023_2024 : MGPS PANELSupply,fabrication,unloading, installation, testing and commissioning of 100 A LT factory build and assembled panel board dust tight vermin proof floor mounted free standing cubicle construction with the following:-Incoming80 A TPN ISOLATOR - 1no(Bus bar of air insulated Aluminum size as per ISS)Outgoing40A 16kA 4P MCB - 7 nosMulti Function Digital Meter,Phase indication lamps etc., in the incoming and. Earth bus of adequate capacity and double earth connection to all switches, internal rigid connection. The board shall be fabricated out of 16 SWG CR sheet and powder coated.
1
-
-
od157710/2023_2024 : CSSD PANELSupply,fabrication,unloading, installation, testing and commissioning of 150 A LT factory build and assembled panel board dust tight vermin proof floor mounted free standing cubicle construction with the following:-Incoming125 A TPN ISOLATOR - 1no(Bus bar of air insulated Aluminum size as per ISS)Outgoing80A 25kA TPN MCCB Icu=Ics with thermal magnetic release set at suitable setting – 2 nos63A 25kA TPN MCCB Icu=Ics with thermal magnetic release set at suitable setting – 5 nosMulti Function Digital Meter,Phase indication lamps etc., in the incoming and. Earth bus of adequate capacity and double earth connection to all switches, internal rigid connection. The board shall be fabricated out of 16 SWG CR sheet and powder coated.
1
-
-
od157711/2023_2024 : LIFT PANELSupply,fabrication,unloading, installation, testing and commissioning of 100 A LT factory build and assembled panel board dust tight vermin proof floor mounted free standing cubicle construction with the following:-Incoming80 A TPN ISOLATOR - 1no(Bus bar of air insulated Aluminum size as per ISS)Outgoing63A 16kA 4P MCB - 1 nos32A 16kA 4P MCB - 1 nosMulti Function Digital Meter,Phase indication lamps etc., in the incoming and. Earth bus of adequate capacity and double earth connection to all switches, internal rigid connection. The board shall be fabricated out of 16 SWG CR sheet and powder coated.
1
-
-
od157712/2023_2024 : LAUNDRY PANEL<br>Supply,fabrication,unloading, installation, testing and commissioning of 100A LT factory build and assembled panel board dust tight vermin proof floor mounted free standing cubicle construction with the following:-<br>Incoming<br>100A TPN ISOLATOR - 1no<br>(Bus bar of air insulated Aluminum size as per ISS)<br>Outgoing<br>40A 25kA TPN MCCB Icu=Ics with thermal magnetic release set at suitable setting – 5 nos<br>Multi Function Digital Meter,Phase indication lamps etc., in the incoming and RS 485 communication port in the out going. Earth bus of adequate capacity and double earth connection to all switches, internal rigid connection. The board shall be fabricated out of 16 SWG CR sheet and powder coated.<br>
1
-
-
NETWORKING SYSTEM ( DATA & VOICE)
-
-
-
1.53.1 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable
2000
-
-
1.53.2 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required2 run of Cable
4000
-
-
1.53.3 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required3 run of Cable
5000
-
-
od175453/2023_2024 : Supply and Fixing of 24 port cat6 UTP patch panel,fully loaded including termination ,Preferred Make Molex , Belden,R&M,Systimax commscope,Dlink
37
-
-
od175949/2023_2024 : Supply, installation, testing and commissioning of single RJ45 outlets, complete with cover plate in existing back box including IDC crimping. ,Preferred Make Molex , Belden,R&M,Systimax commscope,Dlink
100
-
-
od175916/2023_2024 : Supply, installation, testing and commissioning of Dual RJ45 outlets, complete with cover plate in existing back box including IDC crimping, Preferred Make Molex , Belden,R&M,Systimax commscope,Dlink<br>
100
-
-
od175917/2023_2024 : Supply and fixing of 2 module GI backbox (for single and dual outlets) <br>
200
-
-
od175918/2023_2024 : Supply and fixing of 2 module PVC Box for CCTV Fixing <br>
50
-
-
od175919/2023_2024 : Supply and Fixing Cat 6 UTP Patch Cord, 1 Mtr , Preferred Make Molex , Belden,R&M,Systimax commscope,Dlink<br>
500
-
-
od175920/2023_2024 : Supply and Fixing Cat 6 UTP Patch Cord, 2 Mtr. ,Preferred Make Molex , Belden,R&M,Systimax commscope,Dlink<br>
300
-
-
od175921/2023_2024 : Supply and drawing of UTP 4 Pair CAT 6 Lan cable through existing ceiling trunking - Preferred Make Molex ,Belden,R&M,commscope,Dlink<br>
8500
-
-
RACKS
-
-
-
od175922/2023_2024 : Supply and fixing of ’ 800x 1000 mm 42U (FM) rack with covered wire manager, cooling fan ( 4 Nos),AC distribution box and all other accessories. Preferred Make. Rittal/Walrack /D-Link<br>
1
-
-
od175923/2023_2024 : Supply and fixing of 19’’ 17 U Floor mount rack with covered wire manager, cooling fan, AC distribution box , hardware kits including all other accessories. Make. Rittal/Netrack<br>
1
-
-
od175924/2023_2024 : Supply and fixing of 19’’ 12 U Wall mount rack with covered wire manager, cooling fan, AC distribution box , hardware kits including all other accessories. Make. Rittal/Netrack<br>
4
-
-
od175925/2023_2024 : Supply and fixing of 19’’ 9 U Wall mount rack with covered wire manager, cooling fan, AC distribution box , hardware kits including all other accessories. Make. Rittal/Netrack<br>
3
-
-
VOICE BACK BONE
-
-
-
od175926/2023_2024 : Supply and Installation of TEC approved SIP Server based IP-PBX having expansion capacity of Upto 200 lines and loaded with 120 SIP license, with server with minimum Intel®️ Xeon®️ Processor 6 core processor, (11M Cache, 2.10 GHz), Memory: 1X 16 GB RAM, Hard Disk :1X02 TBand 240 GB SSD , Conference Module. (Meet me and Dial out)· Emergency Call Blast Module· IVRS Call routing· Click and dial from Missed call· Outbound Dialer (Preview/ Manual / Auto)· Comprehensive Reports· BLF display on extension Users PC (for all the extensions status like Busy, Ringing, Idle, Dialing, Not registered etc.)· Dash Board with Incoming, outgoing and Un answered call count· 2 Nos PC based Operator console software, Click and dial from PC (Contact List) including USB headset ( Any reputed make)· 5 UC licence for Pop up on PC during incoming call on Analog / Ip phone · Extension users Efficiency report in terms Average ring response, call duration, etc.· Call register· Call details for extensions outgoing, incoming and internal calls· Call center module and IVRS to be supported in existing server., auto phone provisioning and web-based management and user web portal. Make: Bitvoice / Avaya/ Coral/NEC<br>
1
-
-
od175927/2023_2024 : Supply and Installation of Voice Gateway, 2x 10/100 ports, 32x FXS voice gateway, Comprehensive Reports- Pop up during incoming call on Analog/ Ip phone with Name and last call remarks· Extension users Efficiency report in terms Average ring response, call duration, etc.· Call register· Call statistics between intercoms Make : Dinstar / Xtend / Avaya / Coral / Bitvoice<br>
2
-
-
od175928/2023_2024 : Supply and Installation of Voice Gateway, 2x 10/100 ports, 16x FXS voice gateway, Comprehensive Reports- Pop up during incoming call on Analog/ Ip phone with Name and last call remarks· Extension users Efficiency report in terms Average ring response, call duration, etc.· Call register· Call statistics between intercoms etc Make : Dinstar / Xtend / Avaya / Coral / Bitvoice<br>
3
-
-
od175929/2023_2024 : Supply and Installation of Voice Gateway, 2x 10/100 ports, 8x FXS voice gateway, Comprehensive Reports- Pop up during incoming call on Analog/ Ip phone with Name and last call remarks· Extension users Efficiency report in terms Average ring response, call duration, etc.· Call register· Call statistics between intercoms etc Make : Dinstar / Xtend / Avaya / Coral / Bitvoice<br>
2
-
-
od175930/2023_2024 : Supply and Installation of Telephones having following features - min 2.7 inch LCD display , 2 way speaker system , caller ID , Log information , contact storage including all related accessoories Preferred Make : Beetel / Panasonic / Fortinet / Matrix<br>
30
-
-
od175931/2023_2024 : Supply and Installation of normal telephones with all accessories Make : Beetel / Panasonic / Fortinet / Matrix<br>
60
-
-
Network Switches
-
-
-
od175932/2023_2024 : "Supply,Installation,Testing and Commissioning of 24-Port Gigabit L2 Smart Managed witch with 4 SFP Slots Switch -Ports(RJ45) . With 2 year warranty including configurations , load balancing etc or any other configurations as instructed at the time of installation .Preferred Make : Dlink , Netgear , Cisco CBS , HP instant ON<br>"<br>
6
-
-
od175933/2023_2024 : "Supply,Installation,Testing and Commissioning of 48-Port Gigabit L2 Smart Managed witch with 4 SFP Slots Switch -Ports(RJ45) . With 2 year warranty including configurations , load balancing etc or any other configurations as instructed at the time of installation . Preferred Make : Dlink , Netgear , Cisco CBS , HP instant ON<br>"<br>
1
-
-
od175934/2023_2024 : "Supply,Installation,Testing and Commissioning of 24-Port Gigabit L2 Smart Managed POE (160W) witch with 4 SFP Slots Switch -Ports(RJ45) . With 2 year warranty including configurations , load balancing etc or any other configurations as instructed at the time of installation . Preferred Make : Dlink , Netgear , Cisco CBS , HP instant ON<br>"<br>
13
-
-
Fiber Cable and Systems
-
-
-
od175935/2023_2024 : Supply,Installation,Testing and Commissioning of 6 PORT LIU,RACK MOUNT, 1U, loaded with Splice Tray, Pigtail etc including splicing of cables . Preferred Make : Systimax/Panduit / Belden / R&M / Molex/Dlink<br>
9
-
-
od175950/2023_2024 : Supply,Installation,Testing and Commissioning of Optical Transceiver, eSFP, GE, Single-mode SFP1 (1G) Module Module up to 1km (warranty 2 years) compatible with switches Make : Any compatible make
40
-
-
od175936/2023_2024 : Supply, laying, testing, certification and documentation of 1Mtr LSZH RoHs Compliant Fiber patch cord.(Single Mode) , Preferred Make : Systimax/Panduit / Belden / R&M / Molex/Dlink<br>
20
-
-
od175983/2023_2024 : Supply, Store, Installation, Testing and Commissioning of 6 Core Single Mode 9/125 Micron Outdoor Fiber Optic Cable Outdoor Steel Tape Armored (STA) construction, should support moisture resistance & should have water proof layer, Operating temperature upto 60°C, Outer Sheath – HDPE, Bend radius as per IEC 60794-1-2, E6/E11, should support ISO 11801, EIA/TIA 568-B.3 & EIA/TIA 455 standards. Max attenuation should be 0.36db/km or better @ 1310nm and 0.22 db/km or better @ 1550 nm.<br>Preferred Make : Systimax/Panduit / Belden / R&M / Molex/Dlink"
800
-
-
od175938/2023_2024 : Splicing charges for Optical Fibre<br>
40
-
-
Conduits & Cason Cap
-
-
-
1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm
8500
-
-
1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
9500
-
-
od175984/2023_2024 : Supply and fixing 20mm medium gauge Casing-n-Capping with specials confirming to the ISI standards on surface using suitable size fixtures spacing not exceeding 50 cm including making good the damage, colour washing etc. as required. Make: Precision/ Toms/ Finolex / Balco /Polycab /ISI approved any make
50
-
-
od175985/2023_2024 : Supply and fixing 25mm medium gauge Casing-n-Capping with specials confirming to the ISI standards on surface using suitable size fixtures spacing not exceeding 50 cm including making good the damage, colour washing etc. as required. Make: Precision/ Toms/ Finolex / Balco /Polycab /ISI approved any make
50
-
-
od175986/2023_2024 : Supply and laying of 32mm ISI make HDPE pipe for laying Optic Fiber cable or Multipair telephone cables as required (Standard) through soil / ceiling Make: Any ISI approved make
100
-
-
PUBLIC ADDRESS, BGM AND VOICE EVACUATION SYSTEM
-
-
-
od175939/2023_2024 : Supply, installation, testing & commissioning of digital voice alarm network controller of 8 Zone and expandable up to 50 Zone- with 500W built in amplifier: Voice alarm controller should be able to connect• Pre-recorded messages (up to 255).500 W RMS power unit and control of six speaker zones. 6 audio inputs (line)Control inputs and control outputs for connection to external systems, Supervision of the amplifier, the speaker lines, the emergency microphone, the pre-recorded messages, • Possibility of redundant connection with secondary amplifiers and microphone desks, up to 600 m, Make List should be TSG Crome/ Honeywell X618/ Bosch Paviro/Aetis IDA8<br>
1
-
-
od175940/2023_2024 : Supply, Installation, Testing and Commissioning of 500W Class-D Amplifier with following features Protected against overload, short circuits and over-heating. Built-in fan with temperature-controlled rotation speed control, with airflow from front to back of device., Make List should be TSG Crome/ Honeywell X618/ Bosch Paviro/Aetis IDA8<br>
2
-
-
od175941/2023_2024 : Supply, installation, testing & commssioning of 8 programmable keys for zone selection, music, messages ... and a selection key for all zones. Distance to the amplifier up to 600 m, with the possibility of redundant connection. It has volume adjustment, external mic / line input, possibility of PTT (push-to-talk) operation ., Make List should be TSG Crome/ Honeywell X618/ Bosch Paviro/Aetis IDA8<br>
1
-
-
od175942/2023_2024 : Supply, installation, testing & commissioning of 6W metal grille type ceiling mount speaker with excellent speech & music reproduction. These speakers shall be capable of power tapping @ 6/3/1.5W, effective frequency range(-10 dB): 125 Hz to `16KHz, SPL at rated power (1Khz at 1m) 88 dB. , Make List should be TSG Crome/ Honeywell X618/ Bosch Paviro/Aetis IDA8<br>
88
-
-
od175951/2023_2024 : Supply, installation, testing & commissioning of 10W wall mounted speaker with max SPL 1M/1W 87dB. Frequency response of 20Hz-15KHz. Speaker shall have tappings at 6W/3W/1.5W. Quoted rate shall include mounting accessories such as adjustable mounting brackets etc. vide technical specifications., Make List should be TSG Crome/ Honeywell X618/ Bosch Paviro/Aetis IDA8
40
-
-
od175952/2023_2024 : Supply, installation, testing & commissioning of 15W Horn speaker with max SPL 1M/1W 103dB. Frequency response of 500Hz-3500Hz. Speaker shall have tappings at 15W/7.3W/3.75W. Quoted rate shall include mounting accessories such as adjustable mounting brackets etc. vide technical specifications., Make List should be TSG Crome/ Honeywell X618/ Bosch Paviro/Aetis IDA8
4
-
-
od175947/2023_2024 : Supply and Installation of Amplifier rack with 2 mm thick CRCA Sheet Powder Coated min 17 U Racks for all 8 zones with cable mananger, power strip, cooling fans, properly ventilated openable doors, Lockable caster wheels to mount all the amplifiers, routers , system controller, CD player &other devices)<br>
1
-
-
od175948/2023_2024 : Supply and Laying of P.A.system cables - 2 core twin twisted 24/0.2 ATC, Multi strand, over all PVC sheathed in Grey Color FRLS armoured shielded speaker cable with all mounting saddles, GI spacers, GI screws with the required junction boxes, cables glands etc<br>
2000
-
-
CCTV Surveillance System
-
-
-
od175959/2023_2024 : Supply, Receiving, unloading, shifting, storing, installation, testing and commissioning of 4MP IR Dome camera - > 1/3” 4Megapixel progressive CMOS > H.265+ & H.265 dual-stream encoding<br> 20fps@4M(2560×1440) &25/30fps@3M(2304×1296)<br>DWDR, Day/Night(ICR), 3DNR, AWB, AGC, BLC<br>Multiple network monitoring: Web viewer, CMS(DSS/PSS) & DMSS 3.6 mm fixed lens <br>Max IR LEDs Length 30m IP67, PoE-
50
-
-
od175960/2023_2024 : Supply , Receiving, unloading, shifting, storing, installation, testing and commissioning of 4MP IR Bullet camera - - > 1/3” 4Megapixel progressive CMOS<br>H.265+ & H.265 Triple-stream encoding<br>DWDR, Day/Night(ICR), 3DNR, AWB, AGC, BLC<br>Multiple network monitoring: Web viewer, CMS(DSS/PSS) & DMSS<br>3.6 mm fixed lens <br> Max IR LEDs Length 30m<br>IP67, PoE-
50
-
-
od175961/2023_2024 : Supply ,Receiving, unloading, shifting, storing, installation, testing and commissioning of 64 Channel based NVR with Integrated min 8 SATA interfaces , 64 Channel 1.5U 4HDDs 4K & H.265 Pro Network Video Recorder<br>> 16/32/64-channel IP video access<br>> Smart H.265+/Smart H.264+/H.265/H.264/MJPEG; H.265 auto switch<br>> Max 380 Mbps incoming bandwidth<br>> Up to 32MP resolution for live view and playback<br>> 1-channel fisheye dewarping (AI by NVR)<br>> AI by Camera: Perimeter protection; face detection and recognition; SMD Plus; video metadata; ANPR; people counting; stereo analysis; crowd distribution; heat map,
2
-
-
od175962/2023_2024 : upply, installation, Testing and commissioning of 6TB Surveillance HDD for 30 days back up with 2MP resolution @ 25fps Make : WD / Toshiba / Seagate
8
-
-
od175963/2023_2024 : Supply, Installation, Testing and Commissioning of 43” Large format Display suitable for 16x7 operation Edge LED BLUE Display with True Display 16.7M, 3840 x 2160 with 2 HDMI, 2 USB 2.0, 10W Audio Out / Speaker and 1 LAN / Wi-Fi connectivity with wall Mount bracket and all accessories and having 2 years warranty. Make: LG/Samsung
4
-
-
od175964/2023_2024 : Supply, installation of premium quality HDMI cable 10 meter
4
-
-
od175965/2023_2024 : Supply and fixing of 19’’ 12 U Wall mount rack with covered wire manager, cooling fan, AC distribution box , hardware kits including all other accessories. Make. Rittal/Netrack<br>
1
-
-
CATV System
-
-
-
od175966/2023_2024 : Supply and Installation of RF socket outlets complete with back boxes and modular face plates.Make: Finolex,Legrand (Performance warranty 10 years)
50
-
-
od175967/2023_2024 : Supply and Installation of F connectors, Make: Finolex , Legrand (Performance warranty 10 years)
50
-
-
od175968/2023_2024 : Supply,drawing, testing, of coaxial cables RG-6 grade, 0.7 mm solid copper conductor PE insulated ,shielded with fine thinned copper braid and protected with PVC sheath, in the existing surface /recessed PVC conduit as required., Make: Finolex,Havells,Legrand,Polycab (Performance warranty 10 years)
1500
-
-
od175969/2023_2024 : Supply, Installation, Testing and Commissioning of 43” Large format Display , True Display 16.7M, 3840 x 2160 with 2 HDMI, min 1 USB 2.0, 10W Audio Out / Speaker and 1 LAN / Wi-Fi connectivity with wall Mount bracket and all accessories and having 2 years warranty. Preferred Make: LG/Panasonic/Samsung
10
-
-
od175970/2023_2024 : Supply and Installation of 2U rack for cable termination / splicing
10
-
-
Tray and Trunking ( Make : Intec / Indiana / Profab /OBO / Cape )
-
-
-
od175979/2023_2024 : Supply and installation of 1.2mm thickness GI trunking with 1mm cover thickness 100X60 mm wide
450
-
-
od175980/2023_2024 : Supply and installation of 1.2mm thickness GI trunking with 1mm cover thickness 150X60 mm wide <br>
100
-
-
od175981/2023_2024 : Supply and installation of 1.2mm thickness GI trunking with 1mm cover thickness 200X60 mm wide <br><br>
25
-
-
od175982/2023_2024 : Supply and installation of Perforated GI cable trays, fabricated out of 1.4 mm thick GI Sheet with suitable bends, off sets wherever required as per drawing, but without cover. of all supporting brackets made of MS angle, anchor fasteners, screws, bolts, nuts etc, including painting of cable trays.The cable tray and accessories should be FACTORY MADE. The rate shall include the breaking concrete/ brick wall & making good finsh with cement mortar<br>Supports with 25x25x6 Angle/ or with slotted rail with 8mm threded rod and anchor fastener of suitable length.<br>200X50 mm wide <br>
30
-
-
NURSE CALL SYSTEM ( Make : Creonics / Norris )
-
-
-
od175972/2023_2024 : Supply , Installation , Testing and commissioing of Bed side call module which can be fixed in Bed head panels / concealed box outlets consist of following options :- Call / Assist/Presence/Attend/Code Blue / Emergency
16
-
-
od175973/2023_2024 : Supply , Installation , Testing and commissioning of Toilet pull code
16
-
-
od175974/2023_2024 : Supply , Installation , Testing and commissioning of 5 tone illuminated over door indicator with integrated room controller.
16
-
-
od175975/2023_2024 : Supply , Installation , Testing and commissioning of retractile corded handswitch with lock in connector
16
-
-
od175976/2023_2024 : Supply , Installation , Testing and commissioning of Nurse station controller with inbuilt power supply unit and having the following features :- The system switch forms a decentralised communications node for exchanging data between the connected system devices and the rest of the communications system, consisting of : <br>- 1 x RJ45 socket, 100Mb IP Port (IEEE802.3 100BaseTX - 7 x RJ45 sockets, each for a 100Mb IP system port (IEEE802.3 100BaseTX) for connecting all IP capable system modules;
1
-
-
od175977/2023_2024 : Supply , Installation , Testing and commissioing of 32 inch led display with HDMI and DVI input options to display nurse call notifications
1
-
-
od175978/2023_2024 : Supply , Installation , Testing and commissioning of Management Centre Server for Nurse Call System for uploading the firmware and the system configuration, for operating interfaces to foreign systems, for logging of all system events and as a central location for system configuration and remote maintenance including life time free software pack for automatically logging all events in the entire communications system, such as, e.g., calls, presence markings,call acknowledgements, reminders. All the report should be able to generate on real time basis without any delay.
1
-
-
WIFI
-
-
-
od175971/2023_2024 : Supply and installation of WIFI 6, MIMO access point ,Wireless access point should support Multi User 2x2 MIMO,internal Antennas and shoule be 802.11 AX, access point should have USB port, 1 Interface and one console, should support bluetooth low energy mode,Access point should work with ,Wireless access point should support maximum wireless speeds from 400Mbps to 1800 Mbps Gbps . <br>Make : Netgear,Dlink,Dell,Sophos,Fortinet
16
-
-
od157712/2023_2024 : LAUNDRY PANEL<br>Supply,fabrication,unloading, installation, testing and commissioning of 100A LT factory build and assembled panel board dust tight vermin proof floor mounted free standing cubicle construction with the following:-<br>Incoming<br>100A TPN ISOLATOR - 1no<br>(Bus bar of air insulated Aluminum size as per ISS)<br>Outgoing<br>40A 25kA TPN MCCB Icu=Ics with thermal magnetic release set at suitable setting – 5 nos<br>Multi Function Digital Meter,Phase indication lamps etc., in the incoming and RS 485 communication port in the out going. Earth bus of adequate capacity and double earth connection to all switches, internal rigid connection. The board shall be fabricated out of 16 SWG CR sheet and powder coated.<br>
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements