Kerala State Housing Board Tender

od38967/2024_2025 : Branch Pipe, Stainless Steel-304 Supply, installation, testing and commissioning of Branch Pipe, Stainless Steel-304, short type, with 63mm. male instantaneous inlet, male threaded outlet, fitted with 16mm. bore nozzle, having IS: 903 mark.

od38968/2024_2025 : Fire Hose, RRL hose jacketed with circular woven synthetic fibe Supply, installation, testing and commissioning of Fire Hose, RRL hose jacketed with circular woven synthetic fiber. conforming to IS: 636:88, with Working Pressure 14 Kg/Cm2, Proof Pressure 22 Kg / Cm2 and Burst Pressure 38 Kg / Cm2. The Fire Hose shall be with IS: 636 Type-A marking and 63mm. dia., 15 Meter long with pair of 63mm. male and female instantaneous couplings, Stainless steel - 304, having IS: 903 mark and duly S. S. wire wounded. The hose shall be rolled and hung to suitable M. S. support in the Fire Hose Cabinet.

od38969/2024_2025 : Fire Brigade Inlet Breeching, C.I. body, having 3 Gunmetal, 63mm. male<br>instantaneous inlet Supply, installation, testing and commissioning of Fire Brigade Inlet Breeching, C.I. body, having 3 Way Gunmetal, 63mm. male instantaneous inlet, conforming to IS: 903, with non return valves, 25mm. drain valve, flanged outlet, 3 Nos. of rubber blank caps and G.I. chains.

od38970/2024_2025 : Fire Hydrant Valve Supply, installation, testing and commissioning of Fire Hydrant Valve, bearing to ISI:5290 Type-A mark, Stainless Steel-304 body with 63 mm. oblique instantaneous single outlet, 75 mm. N.B. flanged inlet, Stainless Steel - 304 spindle, complete with PVC blank cap, G.I. chain etc.

od38971/2024_2025 : Supply, installation, testing and commissioning of Manual Swing Type Fire Hose ReelComplete Set with heavy duty drum / reel, 19 mm. dia, 30 Meter long 2-ply polyester yarnbraided / rubber braided pressure hose, Red coloured, heavy duty nylon on/off jet/spray nozzle, 22 mm. isolating valve and all other necessary fixing accessories including Fabrication and Erection of M.S. support, as per requirement, for Fixing the Fire Hose Reel Set.

FIRE PIPES, VALVES ACCESSORIES

od38927/2024_2025 : Supply, installation, testing and commissioning of following 4" dia. Bourdon Type Pressure Gauge, with ISI Mark or of equivalent International Standards.Standard Type for indoor use Pressure Gauge with shut off cock and connection Pipe

od38928/2024_2025 : Supply, installation, testing and commissioning of Air Release Valve Gunmetal, conforming to IS 903:1993, having rubber ball with sealing seat and with 25mm. BSP threaded male inlet, including necessary accessories and connections

od38929/2024_2025 : Providing, fixing, testing and commissioning of Non Return Valve, Wafer Swing Check<br>type, PN-16 or above, Vertical / Horizontal Type , as per final requirement,<br>conforming to IS: 13095 with nuts, bolts etc. complete. 150mm

od38931/2024_2025 : Providing, fixing, testing and commissioning of Butterfly Valve, PN-16 or above, slim seal,standard lever operated type confirming to BS:5155 with IS: 13095 Mark, with requiredcompanion flanges, nuts, bolts etc. complete 150 mm.

od38932/2024_2025 : Providing, fixing, testing and commissioning of Forged Ball Valve, PN-16 or above gunmetal /cast alloy, SS handle including necessary accessories and connections. 25mm

od38933/2024_2025 : Hydrant, Sprinkler System & Plant Room : Providing, fixing, pressure testing andcommissioning of Above Ground Fire Line Pipe Work with Heavy Duty (Class-C)Galvanized Steel Pipes, confirming to IS: 3589/1239 Part - I. The pipe with Heavy DutyGalvanized Ductile Iron Screwed Fittings for Pipes up to 50 mm diameter. The pipewith Galvanized Grooved Fittings for pipes above 50mm diameter. The pipe with ButWelded fittings for pump room for all sizes. Piping shall be with all accessoriesrequired for complete installation such as tees, elbows, reducers, check nuts, unions,flanges, nipples and neoprene gasket, bolts, nuts, washers etc. including cutting,threading, grooving, joining, fixing in ducts, on walls, ceiling etc. by using suitable andstrong enough supports, as per requirement, providing higher sizes of Sleeves/Opening,wherever required, and closing the gap between the pipes and sleeves/openings with 2Hr. Fire Rated compound / sealant to the approval of Engineer - in - Charge/Consultant. The total pipe work shall be protected with approved painting system asper technical specification. All Pipe Fittings shall be UL Listed and FM Approved, as perthe technical specification.. 150mm Dia.

od38934/2024_2025 : Hydrant, Sprinkler System & Plant Room : Providing, fixing, pressure testing and commissioning of Above Ground Fire Line Pipe Work with Heavy Duty (Class-C) Galvanized Steel Pipes, confirming to IS: 3589/1239 Part - I. The pipe with Heavy Duty Galvanized Ductile Iron Screwed Fittings for Pipes up to 50 mm diameter. The pipe with Galvanized Grooved Fittings for pipes above 50mm diameter. The pipe with But Welded fittings for pump room for all sizes. Piping shall be with all accessories required for complete installation such as tees, elbows, reducers, check nuts, unions flanges, nipples and neoprene gasket, bolts, nuts, washers etc. including cutting,threading, grooving, joining, fixing in ducts, on walls, ceiling etc. by using suitable and strong enough supports, as per requirement, providing higher sizes of Sleeves/Opening, wherever required, and closing the gap between the pipes and sleeves/openings with 2 Hr. Fire Rated compound / sealant to the approval of Engineer - in - Charge/Consultant. The total pipe work shall be protected with approved painting system as per technical specification. All Pipe Fittings shall be UL Listed and FM Approved, as per the technical specification.150mm Dia

od38964/2024_2025 : Supply, installation, testing and commissioning of Pressure Switches with pressure rating suitable for above Fire Pumps, with a differential of 0.2 to 1.6 Bar, as per Technical Specifications.

INTELLIGENT ADDRESSABLE FIRE ALARM SYSTEM,EXTINGUISHER AND TALK BACK SYSTEM

od38892/2024_2025 : Supply, installation, testing and commissioning of 12 Zone conventional Fire Alarm panel with 30mmin battery back-up with necessary indications, solid state circuitry with visual front and alarm display. The panel shall be designed that the audio alarm activation and silencing switches. The panel shall be provided with repeated system for both audio as well as visual. The panel should have facility to attach standby power system using batteries with all accessories required for complete installation.

od48669/2024_2025 : 17.5.1. CABLING & WIRING Supplying & laying of 2x1.5 sq mm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.

od48670/2024_2025 : 17.2.15. Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.

od48671/2024_2025 : 17.2.14Supplying, installation, testing & commissioning of addressable manual call point complete as required.<br>

od43468/2024_2025 : Providing, fixing, commission and install in position following Portable Fire Extinguisher as per BIS 2190 and BIS: 15683:2006 and with relevant ISI Stamping/Marking. CO2 - 4.5Kg.

od43469/2024_2025 : Providing, fixing, commission and install in position following Portable Fire Extinguisheras per BIS 2190 and BIS: 15683:2006 and with relevant ISI Stamping/Marking.16.1 ABC Dry Powder, Propellant - Dry Nitrogen, Store Pressure Type - 4 Kg.

od43470/2024_2025 : Providing, fixing / laying, test and commission 2 Core x 1.5 mm2 FRLS Armored Cables with Red Colour / Finish, as per Technical Specifications.

od43471/2024_2025 : Supply, installation, testing and commisioning of Public Address speaker with talk back facility 6 Watts with L M T and call switch, made out of powder coated CRCA sheet,wall mounting type and to be installed at a height of not less than 150 CM from the finished floor levels, suitable for concealed mounting

od43472/2024_2025 : Supply, installation, testing & commisioning of micro process based automatic talk<br>back system with controller of 12 Zone, 500 W amplifier, Goose neck type microphone,<br>complete with floor to floor announcing and talk back facilities with the following<br>features and made functional: (a) Feather type key pads to select the zones. (b)<br>Moulded plastic attractive enclosure. (c) Backlight Liquid Crystal Display (LCD) (d) User<br>friendly interactive display. (e) Announcement selector - PH Switch. (f) Listen selector<br>switch. (g) All Call switch to select all zones simultaneously for announcement (h)<br>Zones Call Display On the LCD With Audio Alarm.<br>Controller Unit with 500 W amplifier, Goose neck type microphone and with the<br>following features: (i) Built in Power supply. (ii) Zone Selector switching Circuit<br>(iii)Terminal blocks to terminate zones wires, amplifier wires etc., (iv) Zone Call<br>processing Circuit etc and made functional. Panel to be installed in the Fire Control Room.

SIGNAGES

od38381/2024_2025 : Supply and Installation of Fire Exit Light - Laser type, with High Glow LED Light, size: 12” x 6” or nearby, Ceiling Mounting type with hanging clamps, on/off switch, Red / Green Colour option, power consumption: 8 Watt or less with all accessories required for complete installation as directed by the engineer inc charge. Power supply shaould be provided with UPS back-up.

od38424/2024_2025 : Floor Identification Signage ( ie, GROUND FLOOR, FIRST FLOOR, etc.) at each stair enclosure on every floor, indicating the floor number in words, lettering size shall be 5 Cm. with contrasting color from back ground. Size shall be 15cm x 30cm.

od38444/2024_2025 : Supply and install in position the Signage "FIRE ORDER" it should contain the matter<br>specified in the technical details on 3mm thick "Opaque" PVC foam board of<br>computerized cut, PVC non-reflective self adhesive vinyl painted foam board of 2' x 3'.

od48463/2024_2025 : Supply and Fixing Signage Printed "IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED OTHERWISE" of 1.25cm. height letters in red with white back ground. The size of the board shall be 25 x 30 Cm. and shall be fixed at the height of 2Mts. from finished floor near Manual Pull Stations.

od38445/2024_2025 : Floor Identification Signage (MAIN STAIRCASE, FIRE STAIRCASE, FIRE ASSEMBLY POINT,<br>PUMP ROOM, FIRE CONTROL ROOM, ELECTRICAL ROOM, FIRE LIFT, PASSENGER LIFT<br>Etc.) at each stair enclosure on every floor, indicating the floor number in words,<br>lettering size shall be 5 Cm. with contrasting colour from back ground. Size shall be<br>15cm x 30cm.

MISCELLANEOUS ITEMS

od38356/2024_2025 : Fabrication, supply, installation at site Heavy Duty Galvanized Mild Steel Puddle Flange, Fabricated from Heavy Grade M. S. Pipe, confirming to IS: 1239/ 3589, with PN:20 Drilled M.S. Flange(s), as per Table BS-10 and M.S. Plate, all as per tender drawings and technical specifications, provided. After total fabrication, the puddle flange should be hot dipped galvanized to IS: 4759 and further protected with Epoxy Coating to the approval of the Engineer - in - charge and Consultant.150mm Dia

od38357/2024_2025 : Fabrication, supply, installation at site Heavy Duty Galvanized Mild Steel Puddle Flange, Fabricated from Heavy Grade M. S. Pipe, confirming to IS: 1239/ 3589, with PN:20 Drilled M.S. Flange(s), as per Table BS-10 and M.S. Plate, all as per tender drawings and technical specifications, provided. After total fabrication, the puddle flange should be hot dipped galvanized to IS: 4759 and further protected with Epoxy Coating to the approval of the Engineer - in - charge and Consultant.. 50 mm dia