Kerala State Housing Board Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 1,00,000Document Cost
₹ 8,850Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_KSHB_498340_1Bid Award Id
ViewTender No
2022_CE_KSHB_34(Ele)Tender Authority
Kerala State Housing Board ViewPurchaser Address
-Website
http://http://www.kshb.kerala.gov.in/kshb/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire
4776
-
-
1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
3640
-
-
1.14.3 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire
1828
-
-
1.14.4 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 6 Sq.mm + 1 x 6 sq.mm earth wire
250
-
-
1.14.10 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required4 X 10 sq. mm + 2 X 6 sq. mm earth wire
250
-
-
1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm
250
-
-
1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
100
-
-
1.21.3 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm
75
-
-
1.21.4 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.40 mm
75
-
-
1.21.5 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.50 mm
75
-
-
1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch
522
-
-
1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch
83
-
-
1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet
647
-
-
1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet
103
-
-
1.24.7 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.TV antenna socket outlet
10
-
-
1.25 : Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
150
-
-
1.26 : Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
50
-
-
1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)
30
-
-
1.27.2 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)
154
-
-
1.27.4 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)
276
-
-
1.27.5 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm)
29
-
-
1.27.6 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.12 Module (200mmX150mm)
265
-
-
1.33 : Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block
including connection etc as required.
400
-
-
1.41 : Installation, testing and commissioning of pre - wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
1175
-
-
1.44 : Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard
length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc.
as required.
150
-
-
1.50.1 : Installation of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required.Upto 450 mm sweep
50
-
-
1.55.1 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group A
468
-
-
1.14.7 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire
300
-
-
1.17.1 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.1 x 1.5 sq. mm
400
-
-
1.17.3 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm
500
-
-
1.17.6 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 1.5 sq. mm
400
-
-
1.17.9 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.9 x 1.5 sq. mm
75
-
-
1.17.12 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm
200
-
-
1.17.15 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 2.5 sq. mm
150
-
-
MCB, SWITCHGEARS& DBS
-
-
-
2.3.3 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door
2
-
-
2.4.1 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)4 way (4 + 12), Double door
20
-
-
2.4.2 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 way (4 + 18), Double door
15
-
-
2.5.1 : Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required .(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)4 way (4 + 12), Double door
12
-
-
2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
760
-
-
2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole
20
-
-
2.11 : Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
50
-
-
2.21 : Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2
mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
10
-
-
2.25 : Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for tripple pole and neutral, sheet steel, Vertical MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.
35
-
-
EARTHING
-
-
-
5.2 : Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing
masonry enclosure with cover plate having locking arrangement and watering pipe etc. with
charcoal/ coke and salt as required
1
-
-
5.6 : Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
8
-
-
5.8 : Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth
electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required.
(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
200
-
-
5.14 : Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
500
-
-
od63945/2022_2023 : Providing and fixing 32 mm X 6 mm copper strip on surface or in recess for connections etc. as required.
200
-
-
od63947/2022_2023 : Supplying and laying 32 mm X 6 mm copper strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50 mm)
275
-
-
od63954/2022_2023 : Supply and laying the following sizes of round conductor on cable tray or wall surface, including necessary clamps (each clamp not exceeding 60 cm llength) and bolts etc as required for complete installation as instructed by engineer in charge/consultant. Copper wire No.8 SWG
275
-
-
od63959/2022_2023 : Supply and laying the following sizes of round conductor on cable tray or wall surface, including necessary clamps (each clamp not exceeding 60 cm llength) and bolts etc as required for complete installation as instructed by engineer in charge/consultant. Copper wire No.10 SWG
50
-
-
od63966/2022_2023 : Supply, installation and tesing of 1200mmx1200mmx12mm CI plate electrode earth station conforming to IS:3043-1987 / NEC / IEE complete with brick masonry chamber, heavy duty CI cover, CI frame, GI watering pipe of 50 mm dia with funnel having 20G GI wire mesh etc. The CI cover (heavy duty) frame/ chamber shall be of 450mm x 450mm size. CI manhole cover with frame shall be painted with bitumastic paint, identification of earthpit with yellow paint below the chamber cover, mixtures of charcoal & common salt around electrode including digging of pit up to permanent moisture level but not less than 3 metre depth and back filling. ( value of earth resistance should be less than 1 ohm )
8
-
-
MV CABLE LAYING
-
-
-
7.1.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. mm
250
-
-
7.1.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 95 sq. mm and upto 185 sq. mm
50
-
-
7.1.4 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 185 sq. mm and upto 400 sq. mm
50
-
-
7.5.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm
450
-
-
7.5.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 35 sq. mm and upto 95 sq. mm
125
-
-
7.5.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 95 sq. mm and upto 185 sq. mm
250
-
-
7.5.4 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 185 sq. mm and upto 400 sq. Mm
150
-
-
7.7.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
50
-
-
7.7.2 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
50
-
-
7.8.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
1300
-
-
7.8.2 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
1550
-
-
7.8.3 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
250
-
-
7.8.4 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)
1300
-
-
HOT DIP GALVANIZED IRON CABLE TRAY
-
-
-
4.6.3 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.225 mm width X 50 mm depth X 1.6 mm thickness
575
-
-
4.6.6 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.450 mm width X 50 mm depth X 2.0 mm thickness
50
-
-
4.6.7 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.600 mm width X 50 mm depth X 2.0 mm thickness
100
-
-
4.7.3 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends " ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.225 mm width X 50 mm depth X 1.6 mm thickness
30
-
-
4.7.4 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends " ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.300 mm width X 50 mm depth X 1.6 mm thickness
20
-
-
4.7.6 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends " ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.450 mm width X 50 mm depth X 2.0 mm thickness
20
-
-
od63979/2022_2023 : Supply and clamping the following size of corrugated pvc fiexible conduit with necessary locking ring and check nut at termination pointed using suitable size GI saddles spacing not exceeding 60 cms on surface including making good the damages, colour washing etc.as required 20mm dia
100
-
-
od63983/2022_2023 : Supply and clamping the following size of corrugated pvc fiexible conduit with necessary locking ring and check nut at termination pointed using suitable size GI saddles spacing not exceeding 60 cms on surface including making good the damages, colour washing etc.as required 25 mm dia
100
-
-
od63987/2022_2023 : Supply and clamping the following size of corrugated pvc fiexible conduit with necessary locking ring and check nut at termination pointed using suitable size GI saddles spacing not exceeding 60 cms on surface including making good the damages, colour washing etc.as required 32 mm dia
50
-
-
od63988/2022_2023 : Supplying and fixing following size/modules, PVC open surface box / recess boxes to be placed on surface/recess for modular switches etc as required as instructed by engineer in charge 6 module
10
-
-
od63989/2022_2023 : Supplying and fixing following size/modules, PVC open surface box / recess boxes to be placed on surface/recess for modular switches etc as required as instructed by engineer in charge 8 module
35
-
-
od63990/2022_2023 : Supplying, fixing, testing and commissioning following four pole and double pole , 415 volts and 240 volts, residual current circuit breaker with overload protection (RCBO) of the following rating and sensitivity current in the existing MCB SPN and TPN horizontal/vertical DB's complete with connections, etc. as required and instructed by engineer in charge/ consultant. <br>32A, 30 mA FP RCBO
8
-
-
od63991/2022_2023 : Supplying, fixing, testing and commissioning following four pole and double pole , 415 volts and 240 volts, residual current circuit breaker with overload protection (RCBO) of the following rating and sensitivity current in the existing MCB SPN and TPN horizontal/vertical DB's complete with connections, etc. as required and instructed by engineer in charge/consultant .<br>40A, 30 mA FP RCBO
8
-
-
od63992/2022_2023 : Supplying, fixing, testing and commissioning following four pole and double pole , 415 volts and 240 volts, residual current circuit breaker with overload protection (RCBO) of the following rating and sensitivity current in the existing MCB SPN and TPN horizontal/vertical DB's complete with connections, etc. as required and instructed by engineer in charge/consultant.<br>40A, 100 mA FP RCBO
8
-
-
od63993/2022_2023 : Supplying, fixing, testing and commissioning following four pole and double pole , 415 volts and 240 volts, residual current circuit breaker with overload protection (RCBO) of the following rating and sensitivity current in the existing MCB SPN and TPN horizontal/vertical DB's complete with connections, etc. as required and instructed by engineer in charge/consultant.<br>63A, 100 mA FP RCBO
14
-
-
ISOLATOR FOR DB &amp; VDB
-
-
-
od63919/2022_2023 : Supply, fixing, testing and commisioning of following rating and pole Isolator in existing Seven Segment Distribution Board, tier DBs and Vertical distribution board with spredear links, terminal connections and all accesories as required making all necessary connections etc as required and instructed by engineer in charge/consultant.<br>80A FP Isolator
7
-
-
od63920/2022_2023 : Supply, fixing, testing and commisioning of following rating and pole Isolator in existing Seven Segment Distribution Board, tier DBs and Vertical distribution board with spredear links, terminal connections and all accesories as required making all necessary connections etc as required and instructed by engineer in charge/consultant.<br>63A FP Isolator
7
-
-
Isolator With Enclosure
-
-
-
od63918/2022_2023 : Supply and fixing of FP CRCA sheet steel powder coated enclosure on surface/recess along with following Amps, 415V, DP/FP isolators confirming to IEC 60947-3 complete with all accesories, connections, testing and commissioning etc as required and as instructed by engineer in charge also making good any damages made during installation.100A FP MCB Isolator with enclosure
2
-
-
od63921/2022_2023 : Supply and fixing of FP CRCA sheet steel powder coated enclosure on surface/recess along with following Amps, 415V, DP/FP isolators confirming to IEC 60947-3 complete with all accesories, connections, testing and commissioning etc as required and as instructed by engineer in charge also making good any damages made during installation.80A FP MCB Isolator with enclosure<br>
3
-
-
od63931/2022_2023 : Supply and fixing of FP CRCA sheet steel powder coated enclosure on surface/recess along with following Amps, 415V, DP/FP isolators confirming to IEC 60947-3 complete with all accesories, connections, testing and commissioning etc as required and as instructed by engineer in charge also making good any damages made during installation.<br>160A FP Isolator with enclosure
4
-
-
MCB
-
-
-
od63917/2022_2023 : Supply, installation, testing and commisioning of following rating TP C curve MCB, 10kA as per IS/IEC 60898-12002 in the existing MCB VDB including all connections and iterconnections as required and as instructed by engineer in charge/consultant. <br>63A TP MCB
20
-
-
od63922/2022_2023 : Supply, installation, testing and commisioning of following rating TP C curve MCB, 10kA as per IS/IEC 60898-12002 in the existing MCB VDB including all connections and iterconnections as required and as instructed by engineer in charge/consultant. <br>40A TP MCB
15
-
-
LT CABLE SUPPLY
-
-
-
od63916/2022_2023 : Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor power cable confirming to IS 7098 (part 1) ammended upto date. 1C x 70 Sqmm Cu Flexible with necessary terminations as required
625
-
-
od63923/2022_2023 : Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor power cable confirming to IS 7098 (part 1) ammended upto date. 3Cx10 Sqmm Al Cable
600
-
-
od63930/2022_2023 : Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor power cable confirming to IS 7098 (part 1) ammended upto date. 4cx10sq.mm Al Cable
100
-
-
od63939/2022_2023 : Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor power cable confirming to IS 7098 (part 1) ammended upto date. 4cx16sq.mm Al Cable
63
-
-
od63944/2022_2023 : Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor power cable confirming to IS 7098 (part 1) ammended upto date. 4cx25sq.mm Al Cable
156
-
-
od63946/2022_2023 : Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor power cable confirming to IS 7098 (part 1) ammended upto date. <br>3.5cx35sq.mm Al Cable
444
-
-
od63955/2022_2023 : Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor power cable confirming to IS 7098 (part 1) ammended upto date. 3.5cx50sq.mm Al Cable
388
-
-
od63961/2022_2023 : Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor power cable confirming to IS 7098 (part 1) ammended upto date. 3.5cx70sq.mm Al Cable
1000
-
-
od63964/2022_2023 : Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor power cable confirming to IS 7098 (part 1) ammended upto date. 3.5cx95sq.mm Al Cable
113
-
-
od63970/2022_2023 : Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor power cable confirming to IS 7098 (part 1) ammended upto date. 3.5cx185sq.mm Al Cable
125
-
-
od63974/2022_2023 : Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor power cable confirming to IS 7098 (part 1) ammended upto date. 3.5cx240sq.mm Al Cable
363
-
-
od63982/2022_2023 : Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor power cable confirming to IS 7098 (part 1) ammended upto 3.5cx400sq.mm Al Cable
813
-
-
od63984/2022_2023 : Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor power cable confirming to IS 7098 (part 1) ammended upto date. 3.5cx300 sq.mm Al Cable
113
-
-
HT CABLE SUPPLY
-
-
-
od63915/2022_2023 : Supply of following 11kV (E) grade XLPE insulated PVC sheathed compact circular armoured aluminium conductor HT power cable, insulation screened with extruded semi conducting compound in combination with copper tape suitable for 11kV earthed system confirming to relavent standard - 3Cx185 sq.mm
100
-
-
END TERMINATION
-
-
-
9.1.7 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 10 sq. mm (22mm)
60
-
-
9.1.21 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm)
8
-
-
9.1.22 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm)
28
-
-
9.1.23 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm)
16
-
-
9.1.24 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 95 sq. mm (45mm)
8
-
-
9.1.27 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)
4
-
-
9.1.29 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 240 sq. mm (62mm)
12
-
-
9.1.30 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 300 sq. mm (70mm)
2
-
-
9.1.31 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 400 sq. mm (82mm)
26
-
-
9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)
2
-
-
9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)
2
-
-
9.1.34 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm)
2
-
-
od63985/2022_2023 : "Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminiumconductor cable of 11 kV grade as required." 3Cx185 sq.mm
2
-
-
CABLE MANAGEMENT SYSTEM
-
-
-
od63914/2022_2023 : Supply and fixing of 32 x 12.5 mm PVC Cable Management System with base and lid along with all accessories like external angle, internal angle, flat angle, end cap etc conforming to IEC 61084/ BS 476 & 4678 on surface as required and instructed by engineer in charge/consultant, including all accesories as required for complete installation.
50
-
-
LIGHT &amp; FAN FIXTURES
-
-
-
od63924/2022_2023 : Supply of LED round designar Downlighter with a nominal system lumen output of 750 lumens and a minimum system efficacy >100 lm/W. The luminaire should have a color temperature of 6500K and CRI>80. The luminaire shall meet IP20 rating with THD<10% and PF > 0.9. The luminaire housing should made of plastic with a polycarbonate reflector and a high quality diffuser. The total power consumption should not exceed 9.0W (including driver) 10W
220
-
-
od63934/2022_2023 : Supply of 36 W recess mounted 2' x 2' LED luminaire with system light output greater than 3600 lumens and system efficacy >100 lm/W and UGR <19. The luminaire must be energy efficient with CRI>80, CCT - 6500, pf > 0.95, THD <10% SDCM<5. The luminaire shall be flicker free with<br>a ripple content less than 5 %. The luminaire housing shall be made of CRCA and diffuser material of two layers of prismatic diffuser and a lifetime of 50,000 burning hours as per L70B50 criteria, 4 kV internal surge protection. The luminaire must be BIS certified and must have LM79 and LM80 reports from NABL certified labs 36 W
400
-
-
od63937/2022_2023 : Supply of 4 feet surface mounted battern type luminaire with a power consumption not more than 20 W, luminaire lumen output of 2000 lumens, luminaire efficacy > 120 lm/W with an operanting voltage range from 140 V - 270 V. The luminaire shall have a white CRCA housing with a poly carbonate diffuser to provide uniform light and a sleek design. The luminaire shall have a CCT of 6500 K , CRI > 80, power factor >0.95, SDCM < 5, THD <10% and 50,000 burning hours as per L70B50 criteria. The luminaire shall have flicker content <5% and shall have high and low cut off with auto restart feature. The luminaire shall be EMI/ EMC compliant and shall have a internal surge protection of 4 kV. The luminaire shall have Class - 1 Electrical Insulation, Class - B Serviceability (The driver can be replaced at site level). The luminaire and driver shall be BIS aprroved and test certificates of LM79 and LM80 reports shall be submitted.
185
-
-
od63941/2022_2023 : Supply, installation, testing and commisioning of LED Post Top with a system lumen output of ≥ 2300 lumens .The luminaire shall have a rated system lifetime of 25,000 burning hours at L70. The luminaire should have a color temperature of 3000K and CRI > 70. The luminaire shall meet IP65 with THD < 20% and PF > 0.9. The luminaire shall have closed diffused optics with polycarbonate diffuser board. The total power consumption should not exceed 27W (including driver). The luminaire shall be made up of aluminium die cast housing with polycarboate cover. Luminaire should be with minimum system efficacy of ≥ 85Lumen/Watt. Luminaire should withstand THD less than 10% and should have power factor > 0.90. Driver efficiency should be 85% . Luminaire should comply with all the required IEC standards and should operate in a voltage range of 220-240 volts AC. The luminaire shall be dark grey in color. The LEDs used shall be of high power LEDs. The driver shall be potted type. The luminaire shall be BIS tested and approved and test certificates of LM79 and LM80 reports shall be submitted.
16
-
-
od63949/2022_2023 : Supply and installation of GI aesthetically good looking tubular pole 3m height, hot dip galvanised for mounting of Post top luminiare applied with primer and paint of approved colour and as instructed by the consultant/ engineer in charge 3M ECO Pole
6
-
-
od63957/2022_2023 : Supply of LED bulkhead luminaire that fits seamlessly in a variety of applicatications, consuming a power of 6 W , lumen output greater than 700 lumens with a system efficacy > 110 lm/W. The luminaire shall housing shall be made of High Pressure diecast aluminum with a UV stablised polycarbonate diffuser, IP 66 and IK 09 protection. The luminaire shall have a power factor > 0.9 and shall have 50,000 burning hours as per L70 criteria. The luminaire shall be BIS certified and shall comply all IEC safety requirements and test certificates of LM79 and LM80 reports shall be submitted.
10
-
-
od63960/2022_2023 : Supply of round surface mounted LED designer Downlighter with a nominal system lumen output of 1200 lumens and a minimum system efficacy >100 lm/W. The luminaire shall have a rated system lifetime of 30,000 burning hours at L70. The luminaire should have a color temperature of 6500K and CRI>80. The luminaire shall meet IP20 rating with THD<10% and PF > 0.9. The luminaire housing should made of plastic with a polycarbonate reflector and a high quality diffuser. The total power consumption should not exceed 12W (including driver).The luminaire and driver must be BIS approved.
360
-
-
od63967/2022_2023 : Supply, installation, testing & commissioning of street Light LED luminaire with Lamp for<br>mounting on the existing road lighting pole and all accessories complete as required - 60 watt LED luminaires with lamp
15
-
-
od63973/2022_2023 : Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70 mm top diameter, 130 mm bottom diameter thickness 3mm base plate dimensions of 250x200x12 mm suitable for wind speed as per IS 875 Part III single arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc, complete 6 Meters
15
-
-
od63976/2022_2023 : Supply of 450mm sweep wall fan on surface including mouting and providing all accessories required for complete installation, testing, commisioning etc as required complete (Havells Airboll Hi-Speed or equivalent)
10
-
-
od63981/2022_2023 : Supply of ceiling fan of 1200mm sweep, including the down rod of standard length (upto 30 cm.) of (havels make, ES 50 Premium White or CG make, Riveria or equivalent).
150
-
-
90.3.19.3 : Supply conveyance, installation, testing and commissioning the light fittings of following types made from CRCA sheet 0.5mm thickness with all accessories and lamps directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required1200 mm 1X20W LED Lamp with box type fixture
250
-
-
AC MODULAR SOCKETS
-
-
-
od63913/2022_2023 : Supplying and fixing single phase 3 Pin, 25A Wall Socket Outlet including base plate, cover plate etc. and giving connections as per the direction of engineer in charge as per IEC 60309, of the following capacities. Supply, Installing, testing and commissioning
5
-
-
AC MODULAR SWITCH
-
-
-
od63912/2022_2023 : Supplying & fixing 25A modular switch with indicator including base plate, cover plate etc complete with connections as directed by the engineer in charge.
5
-
-
POP UP BOXES
-
-
-
od63911/2022_2023 : 8(2x4) module Matt black finish pop up box with slim design for perfect integration into furniture equipped with 2 number 6A socket and 1 number CAT 6 data socket & provision for fixing and including one number AV/HDMI socket supplied alongwith installation kits for table tops and all accessories x 1 Nos for integrating projector.
2
-
-
od63925/2022_2023 : Supply, Fixing, testing and commisisoning of 8 module Matt black finish pop up box (2*4) with slim design for perfect integration into furniture equipped with Two number 6A socket (Raw+UPS), Two number CAT 6 data socket & one number of telephone supplied alongwith installation kits for table tops and all accessories as required for complete installation including making good any damages made, as instructed by engineer in charge, providing connections etc as required.
5
-
-
UNITTISED SUBSTATION - 630 kVA
-
-
-
od63910/2022_2023 : Supply, installation, testing and commissioning of 11KV/433V, 3 phase, vector DYN-11 laser scribes 630kVA transformer with tappings from +5% to -15% in steps of 1.5%, changeable by CTR make OLTC with RTCC and AVR with WTI & LV terminals suitable for 1 run of PVCA cable and HV terminals connected to 11 KV, 26.3 KA, 630 A Load Break Switch, with incoming suitable for XLPE cable, with HT HRC fuses, necessary CT's, PT's and output connected to 11KV seal off bushings to the transformer. Rate shall be inclusive of ncessary HT TOD meter as per KSEB/KSEI guidelines control wirings and terminations.Losses shall be as per ECBC guidlines amended upto date.
1
-
-
DIESEL GENERATOR - 400 kVA
-
-
-
od63909/2022_2023 : "Supply, erection, testing and commissioning of 400 KVA DG set with standard accessories coupled to alternator rated 400 kVA/320 kW, 3 phase, 4 wire, 0.8 PF (lag), 415 V mounted on a channel iron base frame with foot mounting AVM pads, Fuel tank (In Built), Charged battery<br>with leads, battery charger, silencer along with exhaust stack of standard size, Composite type acoustic enclosure and standard control panel.. The sound level shall be brought down to 70 dB+/-5 with at a distance of 1m (as per CPCB norms the sound level shall be 75dB at a distance of 1m from the silencer at the top of the enclosure). The items including supply and erection, testing and commissioning of DG complete with necessary control wiring/cabling, metering, indication lamps and fixing accessories etc. Energy meter& CTs shall be tested and certificate shall be obtained from electrical inspectorate lab) Following sanction may be obtained by the contractor, a) Sanctions from Municipality/ Corporation. b) Sanction from Pollution control Board c) sanction from electrical inspectorate Engine and alternator supplied shall be duly tested and supported by the test certificates of the respective manufacturer. Also to submit type test certificates for DG Set.The quoted rate shall be inclusive of necessary trial run, exhaust piping upto the terrace level, necessary control wirings and terminations as instructed by the consultant/ engineer in charge."<br>
2
-
-
UPS - 75 kVA
-
-
-
od63908/2022_2023 : Supply, Installation Testing and commissioning of 75 kVA/KW 3 phase (Includes running modules+ Minimum 1 redundant module) double conversion, DSP Based VFI technology 3 Level inverter , True on line, Hot swappable Modular UPS system as per IEC 62040-3 with 415V +/- 15% V,50Hz,3Ph Input & 415V +/- 15%,3Ph,50 Hz output. Each Module shall be 3 phase either with 20/25/30 kVA Capacity having kVA=KW (Unity power factor)and frame size shall be suitable for adding modules upto 100 kVA. Input & output of module should be electrically isolate in case of any fault.In case of face reverse,load should continue to support rectifer.UPS should work on load power factor 0.5 lag to 0.5 lead.Output shall be true sine wave. UPS shall have RS 232 ports, monitoring software , O/L.S.C. protections & self diagnostic features,LCD Display Panel for Functions & all parameters, complying with IEC standards. Convertors,Invertors, rectifiers & Battery Charger shall utilize PWM technology with IGBT. Battery Back up time of 30 minutes for 50KW load with required numbers of 'SMF -VRLA Battery with Battery management System, housed in suitable Cabinet /stand.Static ByPass with hot swappable centralized bypass option (should be able to replace module without interrupting load), complete with Internal wiring & all accessories to be provided.UPS shall be capable of over load capacity 110 % for 60 min , 125 % fo 10 min, 150% for 60 sec. Proper earthing as per UPS vendor specfication should be provided.<br>
2
-
-
SAFETY ACCESSORIES
-
-
-
od63907/2022_2023 : Supply and installation of fire resistant mortar for sealing of all opening in wall / floor with fire resistance class EI120 according to testing standard EN 1366-3 (Classification EI120 Acc. EN 13501-2) & DIN 4102 Part 9 DIBt approval Z- 19.15 – 2046. Suitable to seal the openings with all kinds of cables, pipes and cable support system in steel and, Aluminium and plastic profiles (Except hollow core conductors). Mortar Harden density shall be 0.8N/mm² and compressive strength shall be 4.0N/mm². The residual openings shall be closed with filler and Plastic pipe penetrations should be covered by Pipe Sleeves. All form work required for installation of the mortar including bar bending works, wire/steel reinforcement if any shall also be considered in this scope of work including all accesories as required for complete installation (Approved make – Pyromix of OBO Bettermann or equivalent)<br>
8
-
-
od63926/2022_2023 : Supplying and installing at approved location approved make fire buckets of 24 gauge galvanized steel sheet, standard 9 litre capacity and of round bottom shape, painted white inside and red outside and black on the bottom, inscribed with letters “FIRE” in black and gold. Cost shall be inclusive of providing MS stand for 2 nos of fire buckes, or , duly painted over a coat of primer.
4
-
-
od63933/2022_2023 : Supply & fixing Laminated drawings of electrical lay out, schematic drawing etc on good frame work.
1
-
-
od63936/2022_2023 : Supply and providing laminated First Aid chart duly framed and placed in a conspicuous location for clear vision.
1
-
-
od63942/2022_2023 : Supply and providing First Aid Box.
2
-
-
od63950/2022_2023 : Supply & fixing of Class A Electrical rubber mat, used for high voltage 11kV , 2 Mtr x 1 Mtr size 3 mm thick, as per IS. 15652 - 2006. with ISI certification mark of standard 1 Mtr width.The work includes cleaning of the floor, fixing of insulation mat by using suitable adhesive, waterproofing compound, sealing materials etc., complete as required
15
-
-
od63956/2022_2023 : Supply of 1 pair 11 KV rubber hand gloves of approved make.
1
-
-
od63958/2022_2023 : Supply and fixing mechanical Foam type fire extinguisher 9Lts. Capacity, stored pressure type controllable discharge mechanism.
3
-
-
od63969/2022_2023 : Supply and fixing Co2 type Fire Extinguisher 4.5Kgs. Capacity, made from brand new seamless cylinder, as per IS: 7285 and CCE approval, fitted with Discharge hose and horn and wheel type<br>valve with initial Charge as per IS: 15683: 2018 specification, bearing ISI
9
-
-
LT PANELS
-
-
-
od63906/2022_2023 : Supplying, Installation, testing and commissioning of compartmentalized, Road Lighting Feeder Pillar fabricated out of suitable size angle iron and flats and covered with 2mm thick cold rolled CRCA sheet, weather proof powder coated painting etc. confirming to IP 55 Complete with Al. Bus Bar, inter-connection with solid/stranded copper conductor wire/copper strips, glands neutral links etc., and mounted with following switchgears etc. for complete the job as required with detailed specification:Incomer - 40A 300mA FP RCBO- 1No.40A 433V, 16kA best conductivity Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. RYB phase indicating LED lamps with control fuses and switches - 1 set.Outgoing16A TP MCB - 4 nos.12A TP Contactor - 4 nos.Astronomical time switch for automatic switching On & Off of street lights at sun set & sun rise or twilight (Auto ON, Auto Off, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required. - 4 nos.
1
-
-
od63927/2022_2023 : Supply, installation, testing and commissioning of floor mounted type automatic power factor correction panel fabricated with 14G CRCA sheet, powder coated, aluminium busbar, wiring, separate metering compartment with multi function meter, phase indication etc. The panel consisting of the provisions as i)Mettalized poly propalene capacitors of 100 KVAR rating of 8 steps switching stages with necessary swithch gears ii) Incomer feeder fitted with 200A 36KA FP MCCB. iii) Seperate metering compartment with Ammeter & Voltmeter selector switches. iv)Microprocessor based controller auto manual selector switch. v)Emergency push button to switch off the panel. vi)Capacitor duty contactors of adequate rating. vii)Manual switching push button with phase indications. the items including necessary safety features, relays and protections and fixing accessories.
2
-
-
od63932/2022_2023 : Design, Fabrication, Supply, installation, testing and commissioning of cubicle type dust and vermin proof, made out of 16SWG /1.6 mm thick CRCA sheet duely rust inhibited,zinc passivated, phosphated and powder coated with approved colour, hinged and earthed front doors with name plate, danger notice board,heavy duty rubber gaskets removable gland plates made out of 2mm thick sheet steel as per specifications and interconnected with suitable AL. Busbar. Rate shall be inclusive of ncessary CT's, PT'S and control wirings and terminations, relays as required and as instructed by engineer in charge - UPS OUTGOING PANEL Incomer - 1: 160A, 16kA FP thermal magnetic MCCBIncomer - 2: 160A, 16kA FP thermal magnetic MCCB250A 415V, 16kA best conductivity Al extensible TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required.RYB phase indicating LED lamps with control fuses and switches - 1set.Multi Function Digital Meter with CT, control fuses etc - 1 no.Outgoings63A, 16kA TP thermal magnetic MCCB -11 Nos.
1
-
-
od63935/2022_2023 : Design, Fabrication, Supply, installation, testing and commissioning of cubicle type dust and vermin proof, made out of 16SWG /1.6 mm thick CRCA sheet duely rust inhibited,zinc passivated, phosphated and powder coated with approved colour, hinged and earthed front doors with name plate, danger notice board,heavy duty rubber gaskets removable gland plates made out of 2mm thick sheet steel as per specifications and interconnected with suitable AL. Busbar. Rate shall be inclusive of ncessary CT's, PT'S and control wirings and terminations, relays as required and as instructed by engineer in charge - FIRE PANEL Incomer - 400A, TPN Isolator400A 415V, 36kA best conductivity Al extensible TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required.RYB phase indicating LED lamps with control fuses and switches - 1set.Multi Function Digital Meter with CT, control fuses etc - 1 no.Outgoings32A DP PCB - 1 Nos63A TP ISO - 1 Nos160A TP ISO - 3 NosSupply, Installation, Testing and Commissioning
1
-
-
od63940/2022_2023 : Design, Fabrication, Supply, installation, testing and commissioning of cubicle type dust and vermin proof, made out of 16SWG /1.6 mm thick CRCA sheet duely rust inhibited,zinc passivated, phosphated and powder coated with approved colour, hinged and earthed front doors with name plate, danger notice board,heavy duty rubber gaskets removable gland plates made out of 2mm thick sheet steel as per specifications and interconnected with suitable AL. Busbar. Rate shall be inclusive of ncessary CT's, PT'S and control wirings and terminations, relays as required and as instructed by engineer in charge - LIFT PANEL 2 Incomer - 63A TPN Isolator - 1 Nos63A 415V, 25kA best conductivity Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required.RYB phase indicating LED lamps with control fuses and switches - 1 set.Outgoings40A 100mA FP RCBO - 2 Nos.25A 30mA FP RCBO - 1 Nos.6A SP MCB - 8 Nos.Supply, Installation, Testing and Commissioning
1
-
-
od63951/2022_2023 : Design, Fabrication, Supply, installation, testing and commissioning of cubicle type dust and vermin proof, made out of 16SWG /1.6 mm thick CRCA sheet duely rust inhibited,zinc passivated, phosphated and powder coated with approved colour, hinged and earthed front doors with name plate, danger notice board,heavy duty rubber gaskets removable gland plates made out of 2mm thick sheet steel as per specifications and interconnected with suitable AL. Busbar. Rate shall be inclusive of ncessary CT's, PT'S and control wirings and terminations, relays as required and as instructed by engineer in charge - LIFT PANEL 1 Incomer - 100A TPN Isolator - 1 Nos100A 415V, 25kA best conductivity Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required.RYB phase indicating LED lamps with control fuses and switches - 1 set.Outgoings63A 100mA FP RCBO - 3 Nos.25A 30mA FP RCBO - 1 Nos.6A SP MCB - 8 Nos.Supply, Installation, Testing and Commissioning
1
-
-
od63953/2022_2023 : Design, Fabrication, Supply, installation, testing and commissioning of cubicle type dust and vermin proof, made out of 16SWG /1.6 mm thick CRCA sheet duely rust inhibited,zinc passivated, phosphated and powder coated with approved colour, hinged and earthed front doors with name plate, danger notice board,heavy duty rubber gaskets removable gland plates made out of 2mm thick sheet steel as per specifications and interconnected with suitable AL. Busbar. Rate shall be inclusive of ncessary CT's, PT'S and control wirings and terminations, relays as required and as instructed by engineer in charge - UTILITY PANEL Incomer - 250A, 36kA FP thermal magnetic MCCB250A 415V, 36kA best conductivity Al extensible TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required.RYB phase indicating LED lamps with control fuses and switches - 1set.Multi Function Digital Meter with CT, control fuses etc - 1 no.Outgoings40A, 25kA TP thermal magnetic MCCB - 1 Nos.63A, 25kA TP thermal magnetic MCCB - 3 Nos.125A, 25kA TP thermal magnetic MCCB - 2 Nos.160A, 25kA TP thermal magnetic MCCB - 1 Nos.Supply, Installation, Testing and Commissioning
1
-
-
od63962/2022_2023 : Design, Fabrication, Supply, installation, testing and commissioning of cubicle type dust and vermin proof, made out of 16SWG /1.6 mm thick CRCA sheet duely rust inhibited,zinc passivated, phosphated and powder coated with approved colour, hinged and earthed front doors with name plate, danger notice board,heavy duty rubber gaskets removable gland plates made out of 2mm thick sheet steel as per specifications and interconnected with suitable AL. Busbar. Rate shall be inclusive of ncessary CT's, PT'S and control wirings and terminations, relays as required and as instructed by engineer in charge - UPS PANEL Incomer - 250A, 25kA FP thermal magnetic MCCB250A 415V, 25kA best conductivity Al extensible TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required.RYB phase indicating LED lamps with control fuses and switches - 1set.Multi Function Digital Meter with CT, control fuses etc - 1 no.Outgoings125A, 25kA TP thermal magnetic MCCB - 4 Nos.Supply, Installation, Testing and Commissioning
1
-
-
od63965/2022_2023 : Design, Fabrication, Supply, installation, testing and commissioning of cubicle type dust and vermin proof, made out of 16SWG /1.6 mm thick CRCA sheet duely rust inhibited,zinc passivated, phosphated and powder coated with approved colour, hinged and earthed front doors with name plate, danger notice board,heavy duty rubber gaskets removable gland plates made out of 2mm thick sheet steel as per specifications and interconnected with suitable AL. Busbar. Rate shall be inclusive of ncessary CT's, PT'S and control wirings and terminations, relays as required and as instructed by engineer in charge - MEDICAL EQUIPMENT PANEL Incomer - 400A, 36kA FP thermal magnetic MCCB400A 415V, 36kA best conductivity Al extensible TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required.RYB phase indicating LED lamps with control fuses and switches - 1set.Multi Function Digital Meter with CT, control fuses etc - 1 no.Outgoings63A, 25kA TP thermal magnetic MCCB - 1 Nos.100A, 25kA TP thermal magnetic MCCB - 2 Nos.160A, 25kA TP thermal magnetic MCCB - 1 Nos.Supply, Installation, Testing and Commissioning
1
-
-
od63972/2022_2023 : Design, Fabrication, Supply, installation, testing and commissioning of cubicle type dust and vermin proof, made out of 16SWG /1.6 mm thick CRCA sheet duely rust inhibited,zinc passivated, phosphated and powder coated with approved colour, hinged and earthed front doors with name plate, danger notice board,heavy duty rubber gaskets removable gland plates made out of 2mm thick sheet steel as per specifications and interconnected with suitable AL. Busbar. Rate shall be inclusive of ncessary CT's, PT'S and control wirings and terminations, relays as required and as instructed by engineer in charge - HVAC PANEL Incomer - 315A, 25kA FP thermal magnetic MCCB315A 415V, 25kA best conductivity Al extensible TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required.RYB phase indicating LED lamps with control fuses and switches - 1set.Multi Function Digital Meter with CT, control fuses etc - 1 no.Outgoings,100A, 25kA TP thermal magnetic MCCB - 3 Nos.80A, 25kA TP thermal magnetic MCCB - 4 Nos.Supply, Installation, Testing and Commissioning
1
-
-
od63975/2022_2023 : Design, Fabrication, Supply, installation, testing and commissioning of cubicle type dust and vermin proof, made out of 16SWG /1.6 mm thick CRCA sheet duely rust inhibited,zinc passivated, phosphated and powder coated with approved colour, hinged and earthed front doors with name plate, danger notice board,heavy duty rubber gaskets removable gland plates made out of 2mm thick sheet steel as per specifications and interconnected with suitable AL. Busbar. Rate shall be inclusive of ncessary CT's, PT'S and control wirings and terminations, relays as required and as instructed by engineer in charge - SSB 2 Incomer - 400A, 25kA FP thermal magnetic MCCB400A 415V, 25kA best conductivity Al extensible TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required.RYB phase indicating LED lamps with control fuses and switches - 1set.Multi Function Digital Meter with CT, control fuses etc - 1 no.Outgoings80A, 25kA TP thermal magnetic MCCB - 10 Nos.63A, 25kA TP thermal magnetic MCCB - 1 Nos.Supply, Installation, Testing and Commissioning
1
-
-
od63980/2022_2023 : Design, Fabrication, Supply, installation, testing and commissioning of cubicle type dust and vermin proof, made out of 16SWG /1.6 mm thick CRCA sheet duely rust inhibited,zinc passivated, phosphated and powder coated with approved colour, hinged and earthed front doors with name plate, danger notice board,heavy duty rubber gaskets removable gland plates made out of 2mm thick sheet steel as per specifications and interconnected with suitable AL. Busbar. Rate shall be inclusive of ncessary CT's, PT'S and control wirings and terminations, relays as required and as instructed by engineer in charge - SSB 1 Incomer - 630A, 36kA FP thermal MCCB with thermal magnetic release630A 415V, 36kA best conductivity Al extensible TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required.RYB phase indicating LED lamps with control fuses and switches - 1set.Multi Function Digital Meter with CT, control fuses etc - 1 no.Outgoings250A, 25kA TP thermal magnetic MCCB - 2 Nos.400A, 25kA TP thermal magnetic MCCB - 2 Nos.Supply, Installation, Testing and Commissioning
1
-
-
od63986/2022_2023 : Design, fabrication, supply, installation, testing and commissioning of cubicle type dust and vermin proof, made out of 16SWG /1.6 mm thick CRCA sheet duely rust inhibited,zinc passivated, phosphated and powder coated with approved colour, hinged and earthed front doors with name plate, danger notice board,heavy duty rubber gaskets removable gland plates made out of 2mm thick sheet steel as per specifications and interconnected with suitable AL. Busbar. Rate shall be inclusive of ncessary control wirings and terminations, relays as required and as instructed by engineer in charge - Main Panel ,Incomer 1 :1000A FP 50kA ACB - 1 Nos,Incomer 2 : 630A FP 50kA Microprocessor Based MCCB - 1 Nos,Incomer 3 : 630A FP 50kA Microprocessor Based MCCB - 1 Nos,Bus Coupler - 1000A FP 50kA ACB - 1 Nos,1000A 415V, 50kA best conductivity Al extensible TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required.,RYB phase indicating LED lamps with control fuses and switches - 3 set.Multi Function Digital Meter with CT, control fuses etc - 3 Nos.Class B & Class C/ Class 1 & Class 2 Surge arrestor device - 1 Nos.Analogue kWH meters - 2 Set (DG Incomer Side)Necessary sync relays, sync mules, PLC, control wirings, CT, PT's and as per KSEI guidelines,Outgoings,200A, 36kA TP thermal MCCB with thermal magnetic release -2 Nos.250A, 36kA TP thermal MCCB with thermal magnetic release -1 Nos.315A, 36kA TP thermal MCCB with thermal magnetic release -1 Nos.400A, 36kA TP thermal MCCB with thermal magnetic release -3 Nos.630A, 36kA TP thermal MCCB with thermal magnetic release -2 Nos.Supply, Installation, Testing and Commissioning
1
-
-
LIGHTNING PROTECTION SYSTEM
-
-
-
od63905/2022_2023 : Supply, installation and testing of maintenance free Earthing system as per IS 2309 ,IEC 62305 part3, IEC 60364, IEC 62561 part 2, IS 3043, UL 467 & UL 96 standards. Earthing System comprises of molecularly bonded copper of 99.9% purity on low carbon steel of 3m length (1m (219 20 CU) x 3 nos), having a diameter of 20mm with copper coating thickness of 250 microns with self-coupling bore and peg arrangement (without the need for external coupler) with fault current withstand capability of 20 KA rms value for 1 second and I peak of 50 KA. For obtaining desired length, the number of rods shall be increased and is provided with Universal Clamp (2730 20 VA) made of SS 304 for clamping the cable/flat conductor to the rod. Impact point (219 20 IP) on the bottom rod for easy insertion. Earth enhancing mineral compound (ECS PB 12.5) is used for improving the soil conductivity. Earth enhancing mineral compound shall be so designed and constructed that in normal use their performance is reliable and without danger to persons and the surroundings. The material shall be mineral inert to sub soil and shall not pollute the environment. It shall provide a stable environment in terms of physical and chemical properties and exhibit low resistivity. It shall not be corrosive to the earth electrode itself. The material should have a resistivity less than 0.2 Ohm meter. It should be free from hazardous substances The mineral compound is required to have minimum 12.5 Kg of the total composite. Polypropylene & Polyethylene (UFE)Earth electrode inspection chamber with heavy duty cover should be used to cover the Earth Rod. The dimension shall be 170mmx 170mmx 190mm with a weight bearing capacity of 5KN, including all accesories as required for complete installation as instructed by engineer in charge. (Minimum 2 earth pits shall be provided. No of earth pits shall be increased till overall earth resistance of the system is less than 10ohms as per site conditions and soil resistivity)
3
-
-
od63928/2022_2023 : Supply, installation, testing and commisioning of Lightning counter - To count no of lightning strike & it can record the date and time of the lightning incident. to be mounted inside enclosure including suitable weatherproof cabinet of sleek design as approved by client representative and all accesories required for complete installation
1
-
-
od63929/2022_2023 : Providing and fixing of Cross connector for Flat: Suitable for 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate.
15
-
-
od63938/2022_2023 : Supply and fixing of PVC trapezoidal 2.5m long ducts including the fastening clamps and all accessories as required.
10
-
-
od63943/2022_2023 : Supply and laying hot dip Galvanised Steel Flat having 70 microns zinc 30X3 mm thick from earth electrode directly in ground as required. Hot Dip GI strip, corrosion resistant. Cross sectional area of 90mm square According to DIN EN 50164-2 (VDE 0185 part 202) Meets the requirement of VDE0185/305(IEC 62305) Zinc coating: 500 g/m square (70 micron coating) Should be tested and use exclusively for lightning protection earthing system and ring equipotential bonding including cross connectors and all accesories as required for complete installation as instructed by engineer in charge.
305
-
-
od63948/2022_2023 : Supply and Fixing Equipotential bonding rail for Lightning Arrestor applications(Test Joint). Equipotential bonding rail for equipotential bonding according to DIN VDE 0100-410/540 and lightning protection equipotetial bonding according to DIN VDE 0185-305. Base plate and cover hood from polystyrene. Colour: Black, UV resistant. Can be used outdoor also. Screw and crossbar made of VA. Capable of carring lightning current 100KA (10/350). Connection options: 7 x single or multi-core conductors to 25mm square or fine core conductors to 16mm square. 1 x round cable Rd 8-10. 1 x flat strip to FL 30 or round cable RD 8-10 including corrosion tapes and all accesories as required for complete installation as instructed by engineer in charge.
10
-
-
od63952/2022_2023 : Supply and fixing of expansion piece with connector: For equalising temperature related length changes. Necessary on conductors length over 20 meters. For round conductor Rd 8/ALU. Connector: For T cross and parallel connectors. Quick installation using hexagonal bolt M10X30 high-grade hot dip galvanised. Conforms to the requirements according to DIN VDE 0185-305 (IEC 62305) and all accesories as required for complete installation
25
-
-
od63963/2022_2023 : Supply and fixing of cross connector/T connector: to route vertical down conductor /mesh formation made of stainless steel/hot dipped galvanised iron with necessary screws etc as required. Installed with 4 hexagonal bolts M8*25 with M8 hexagonal nuts and all accesories as required for complete installation
25
-
-
od63968/2022_2023 : Supply and installation of 8mm solid aluminium round conductor: For concrete building Terrace application. Meets the technical specification according to DIN EN 50164-2 (VDE 0815 part 202). Meets the requirement of VDE0185/305(IEC 62305) RD 8/ALU: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) With 50 sq.mm cross sectional area. Polyamide roof cable holder for flat roof: DIN 48829 Form B1. Closed form with bottom. With double conductor holder. Filling weight 1Kg (frost-resistant concrete). Sleeve from polyethylene, black.including all weather conditions tested glue to fix holder, including all accesories as required for complete installation as instructed by engineer in charge.
121
-
-
od63971/2022_2023 : Supply and installation of 8mm solid aluminium round conductor: For concrete building Meets the technical specification according to DIN EN 50164-2 (VDE 0815 part 202). Meets the requirement of VDE0185/305(IEC 62305) RD 8/ALU: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) With 50 sq.mm cross sectional area. Polyamide Conductor holder:With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder. Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance, including all accesories as required for complete installation as instructed by engineer in charge.<br>b) Supply and fixing of Horizontal run-Parapet application
374
-
-
od63977/2022_2023 : Supply and installation of 8mm solid aluminium round conductor: For concrete building Meets the technical specification according to DIN EN 50164-2 (VDE 0815 part 202). Meets the requirement of VDE0185/305(IEC 62305) RD 8/ALU: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) With 50 sq.mm cross sectional area. Polyamide Conductor holder:With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder. Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance, including all accesories as required for complete installation as instructed by engineer in charge.<br>a) Supply and fixing of Vertical run- Down conductor
195
-
-
od63978/2022_2023 : Supply, installation and tesing of 4 meter air terminal with accessories, providing and fixing air terminals as per IEC -62305 part-3 16mm rod tapered to 10 mm aluminium rod 4 meter rod: Meets the technical specification according to DIN EN 50164-2 (VDE 0815 part 202). Meets the requirement of VDE0185/305(IEC 62305) 101 VL 4000: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) Suitable for high wind load. System consist of Fang Fix with base and clamp on the top air terminal is erected. Fang fix clamp made of cable bracket, lightning tested for 100 KA 10/350 micro sec waveform. 2 nos of 16 KG stone of 365 mm diameter, high level of stability. Quick and easy mounting of interception rod using anchors.Concrete, frost-resistant, can be stacked, including all accesories as required for complete installation as instructed by engineer in charge.
1
-
-
MISC. CIVIL ITEMS
-
-
-
14.4 : Excavation for cable trenches in soft soil, depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 metres.
250
-
-
14.15.1 : Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.63 mm· dia (OD-63 mm & ID-51 mm nominal)
120
-
-
14.15.3 : Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.120 mm dia (OD-120 mm & ID-103 mm nominal)
50
-
-
2 POLE STRUCTURE
-
-
-
od63904/2022_2023 : Supply and erection of Double pole structure using 10.5mtr 200 x 100mm RS joist with required quantity of 100 x 50mm MS channel for mounting AB switch, DO fuses Lightning arrestors etc with Ms flats clamps base plate bolts nuts etc. including cutting welding aluminium painting all as per standard requirements of Electrical inspectorate complete including supply and installation of following over headline accessories as required. 11KV pin insulator. 11KV Disc insulators as required 1KV 400A 3 phase gang operated. Vertical single make or break type off load Air brake switches complete with all hardware’s like insulators, fixing channels operating rods, handle locking arrangements bolts nuts and complete. 9kv 5kA lighting arrestor 11kV 400A dropout fuse sets complete with all hard ware like supporting insulators .fuse rods, bolts and nuts complete. 11kV 400A dropout fuse sets complete with all hard ware like supporting insulators fuse rods bolts and nuts complete. Pipe earth electrode for the DP structure & LA Earthling 6 SWG Copper for Lightning arrestor earthling including all round fencing to a height of 1.8 meter with all round clearance of 1.25 meter and filling of 40mm granite gully in the yard
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements