The Kerala State Homeopathic Cooperative Pharmacy Limited Tender

Taking out existing interlocking paver blocks and stacking of serviceable material conveniently including the hire charges of all tools and plants and disposal of debris conveniently with all leads and lifts as directed by the officers concerned.

Demolishing cement concrete manually/ by mechanical means including disposal of material within all leads and lifts as directed by the officers concerned.

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas including disposal of excavated earth,within all leads and lifts, disposed earth to be levelled and neatly dressed. complete as directed by the officers concerned.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering, including cost and conveyance of all materials, labour charges, hire charges of all tools & plants and cost of curing etc complete as directed by the officers concerned.- All work up to plinth level,-1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement but including cost and conveyance of all materials, labour charges, hire charges of all tools & plants and cost of curing etc complete as directed by the officers concerned. - All work up to plinth level:-M30

Centering and shuttering including strutting, etc. and removal of form, including all labour charges, hire charges of form work/ shuttering work, tools & plants etc complete as directed by the officers concerned for:- Foundations, footings, bases of columns, etc for RCC.

Centering and shuttering including strutting, etc. and removal of form, including all labour charges, hire charges of form work/ shuttering work, tools & plants etc complete as directed by the officers concerned for:-Lintels, beams, plinth beams, girders bressumers and cantilevers

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding, including cost and conveyance of all materials, labour charges, hire charges of all tools & plants etc complete as directed by the officers concerned complete upto plinth level.Thermo Mechanically treated bars

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, with all lifts and leads as directed by the officers concerned.

Filling with gravel and consolidating the same plinth. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, with all lifts and leads as directed by the officers concerned.

Reinforced cement concrete work in attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement, including cost and conveyance of all materials, labour charges, hire charges of all tools & plants and cost of curing etc complete as directed by the officers concerned:- M30

Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15° landings, balconies, shelves, chajjas, lintels bands, sunshade, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with M25 concrete including cost and conveyance of all materials, labour charges, hire charges of all tools & plants and cost of curing etc complete as directed by the officers concerned.

Centering and shuttering including strutting, propping etc. and removal of form, including all labour charges, hire charges of form work/ shuttering work, tools & plants etc complete as directed by the officers concerned for : Columns, Pillars, Piers, Abutments, Posts and Struts.

Centering and shuttering including strutting, propping etc. and removal of form, including all labour charges, hire charges of form work/ shuttering work, tools & plants etc complete as directed by the officers concerned for : Lintels, beams, plinth beams, girders bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form, including all labour charges, hire charges of form work/ shuttering work, tools & plants etc complete as directed by the officers concerned for: Suspended floors, roofs, landings, balconies and access platform

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding, including cost and conveyance of all materials, labour charges, hire charges of all tools & plants etc complete as directed by the officers concerned complete above plinth level.(Thermo Mechanically treated bars)

Brick work using cc solid blocks of any size having a minimum compressive strength of 5N/mm² in plinth in cement mortar 1:6 including cost and conveyance of all materials, labour charges, hire charges of all tools and plants complete as directed by the officers concerned.

Brick work using cc solid blocks of any size having a minimum compressive strength of 5N/mm² in superstructure above plinth level upto floor five level, including cost and conveyance of all materials, labour charges, hire charges of all tools and plants complete as directed by the officers concerned.

Flooring with cement concrete of specified grade excluding the cost of centering and shuttering, including cost and conveyance of all materials, labour charges, hire charges of all tools & plants and cost of curing etc complete as directed by the officers concerned :All work up to plinth level:-1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

Flooring with cement concrete of specified grade excluding the cost of centering and shuttering, including cost and conveyance of all materials, labour charges, hire charges of all tools & plants and cost of curing etc complete as directed by the officers concerned:-1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 nominal size)

Plastering work in flooring 12 mm thick finished with a floating coat of neat cement of mix, including cost and conveyance of all materials, labour charges, hire charges of all tools & plants and cost of curing etc complete as directed by the officers concerned:-1:3 (1 cement: 3 fine sand)

Plastering work in super structure 12mm thick cement plaster floated hard and trowelled smooth, including cost and conveyance of all materials, labour charges, hire charges of all tools & plants and cost of curing etc complete as directed by the officers concerned:-1:4 (1 cement: 4 fine sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete, including cost and conveyance of all materials, labour charges, hire charges of all tools & plants etc complete as directed by the officers concerned.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface including cost and coveyance of all materials, labour charges, hire charges of all machinery/tools and plants etc complete as directed by the officers cocerned.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: including cost and coveyance of all materials, labour charges, hire charges of all machinery/tools and plants etc complete as directed by the officers cocerned:-Two or more coat on new work

Structural steel work riveted, bolted or welded in built up sections, trusses, stairs and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including cost and conveyance of all materials, labour charges, hire charges of all tools & plants etc complete as directed by the officers concerned.

Supplying and fixing grilled rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters:-80x1.25 mm M.S. laths with 1.25 mm thick to cover,Providing and fixing ball bearing for roling shutters and providing mechanical device chain and crank operation for operating rolling shutters including a built in door of size 90x200 cm. Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in-Charges, (area of grill to be measured).

Fixing aluminium frame work (Departmentally provided) for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portion-Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)-Powder coated aluminium (minimum thickness of powder coating 50 micron)

Fixing glazing (Departmentally provided) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge.(Cost of aluminium snap beading shall be paid in basic item):

Providing and laying matt finished fully vitrified floor tiles of Size 800x800mm and thickness 10mm or nearer size with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement & matching pigments etc and cost & conveyance of all materials, labour charges, hire charges of all tools & plants complete as directed by the officers concerned

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: and cost & conveyance of all materials, labour charges, hire charges of all tools & plants complete as directed by the officers concerned.

White Vitreous China Flat back wash basin size 550x400mm with single 15 mm C.P.brasspillar taps

White Vitreous China Flat back wash basin size 450x300mm with single 15 mm C.P.brasspillar taps

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm nominal outer dia pipes

Providing and fixing Unplasticized Polyvinyl Chloride (uPVC) pipes, including all PVC plain fittings like bend, elbow, tee and unions etc & fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step PVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50mm nominal outer dia pipes (10 Kgf/cm²)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade, including cost and conveyance of all materials, labour charges, hire charges of all tools & plants etc complete as directed by the officers concerned.Two or more coats on new work