Kerala State Film Development Corporation Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 50,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_KSFDC_305637_1Bid Award Id
ViewTender No
365/T2/19/KSFDCTender Authority
Kerala State Film Development Corporation Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Dismantling plumbing lines (internal & external work) including excavation and refilling trenches after taking out the pipes,manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :15 mm to 40 mm nominal bore
50
-
83.42
Dismantling plumbing lines (internal & external work) including excavation and refilling trenches after taking out the pipes,manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :Above 40 mm nominal bore.
60
-
92.81
Dismantling the urinal ,wash basin & water closet including removing its fittings, clamps etc complete
6
-
512.7
wooden/steel doors, windows including removing shutters,chowkhats, architrave,holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below
4
-
206.87
wooden/steel doors, windows including removing shutters,chowkhats, architrave,holdfasts etc. complete and stacking within 50 metres lead :Of area beyond 3 sq. metres
4
-
283.61
Dismantling aluminium/Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge
550
-
31.85
Demolishing R.C.C.work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre,stacking serviceable and unserviceable material separately including cutting reinforcement bars.
5
-
1752.8
Dismantling steel work (wherever necessary) in built up sections in tubes,angles, tees, flats and channels including all gusset plates,bolts, nuts, cutting rivets,welding etc.manually/by mechanical means,dismembering &stacking the same and roofing sheets etc within 50 metres lead as per direction of Engineer-in-charge.
500
-
3.14
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:G.S. Sheet - Generator room
70
-
91.87
Dismantling and removing flooring concrete (1:4:8), including removing the wooden/steel chair clamps in its including stacking the material within 50 metres lead as per direction of Engineer in charge (Yard) Nominal concrete 1:4:8 or leaner mix (equivalent design mix)
10
-
806.21
Dismantling steel pipes,hand rails over stair/ balcony, queue lines etc in various diameter 25 to 50mm manually / by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge.
500
-
2.1
Disposal of building rubbish / malba / glass wool/POP or similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or contractor's own risk at private place beyond 50 m initial lead, for all loads including all lifts involved.
160
-
158
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas in all classes of soil including dewatering and shorring if necessary and disposal of excavated earth, lead up to 50 m and lift up to 1.5m, disposed earth to be levelled and neatly dressed for outside wall foundation, outer drain, fire sump tank etc - All kinds of soil
50
-
165.07
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidatingeach deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 mPipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm
10
-
461.33
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level .1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) for foundation works and plat form PCC of platforms for transformer & generator etc
8
-
5869.06
Filling avilable excavated earth ( excluding rock) in trenches , plinth,sides of foundations etc in layers not exeeding 20 cm in depth,consolidating each deposited layer by ramming and watering , lead up to 50 m & lift up to 1.5 m Proposed projection room, extension of seating , inside of generator platform,tranformer platform etc.)
50
-
164.8
Supplying and filling in plinth with sand under floors, filling the yard etc ,including watering, ramming,consolidating and dressing complete.
20
-
1202.8
Random rubble masonry with hard stone in foundation and plinth in Cement mortar 1:6 including levelling up with cement concrete 1:6:12 (1cement:6 coarse sand:12 graded stone aggregate 20mm nominal size) upto plinth level Cement mortar 1:6 (1 cement : 6 coarse sand)
10
-
5197.64
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) including foundation of walls , fire tank base etc.
5
-
6874.17
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). for lintel and shade of all new brick walls, fire tank wall etc , ,.
10
-
9686.38
Centering and shuttering including strutting, propping etc. and removal of form for all heights :Below plinth Foundations, footings, bases of columns,platforms and base of fire tank etc. for mass concrete Centering and shuttering including strutting, propping etc. and removal of form for all heights :
40
-
254.19
Centering and shuttering including strutting, propping etc. and removal of form for all heights Above plinth walls , Lintels, beams, shade ,plinth beams, girders, fire tank wall and cantilevers
50
-
449.2
Steel reinforcement for R.C.C. work including straightening,cutting,bending,placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
800
-
74.18
Steel reinforcement for R.C.C. work including straightening,cutting,bending,placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
800
-
74.18
Solid block masonry using pre cast solid blocks (Factory made) of size 40 x 20 x 15cm or nearest available size conforming to IS 2185 part I of 1979 for super structure above plinth up to floor V level, thickness 20cm and above in CM 1:6 (1 cement : 6 coarse sand) etc complete
26
-
7493.42
Solid block masonry using pre cast solid blocks (Factory made) of size 40 x 20 x 10cm or nearest available size conforming to IS 2185 part I of 1979 for super structure above plinth up to floor V level, thickness 20cm and above in CM 1:6 (1 cement : 6 coarse sand) etc complete for outer drain
3
-
7646.75
WOOD WORK
-
-
-
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class teak wood
0.45
-
121549.04
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured).Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Second class teak wood35 mm thick shutters
12
-
3339.6
Extra for providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured)
24
-
130.8
Providing and fixing IS:12817 marked stainless steel butt hinges (heavyweight) with stainless steel screws etc. complete :125 x 64 x 2.50 mm
18
-
97.18
Providing and fixing ISI marked oxidised S.S. handles conforming to IS:4992 with necessary screws etc. complete Do - do - 300 mm for wooden doors
4
-
849
Do - do - 600 mm for wooden doors
14
-
1564
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete250 x10 mm
24
-
115.46
Providing and fixing bright finished brass 100 mm mortice lock with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality).
4
-
729.28
Providing and fixing 300mm anodized aluminium heavy type Aldrop with necessary screws etc. complete (best make of approved quality).
6
-
189
Providing 40x 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)
40
-
155.43
FRP DOOR - Toilets
-
-
-
Providing and fixing Fibre Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibre glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
32
-
544.55
30 mm thick Fibreglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, cast monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.
10
-
3323.42
METAL DOOR FOR pump room & entrance door of pump room area
-
-
-
METAL DOOR : Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. (Using M.S. angels 40 x 40 x 6 mm for diagonal braces)
16.2
-
3761.75
Painting with synthetic enamel paint of approved brand and manufacturer of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacturer.
40
-
147.18
Repairing of metal door frames and shutters by renewing damaged frames and shutters using angle iron and MS sheets etc including screws and ,nails etc, renewing the hinges if necessary etc complete as directions by the engineer in charge etc complete, including cost and conveyance of all materils and all labour charges etc complete
1
-
2452.08
ALUMINIUM DOORS & WINDOWS
-
-
-
Dismantling and refixing the existing aluminium doors and fxed partitions wherever necessary, ( Dismantling paid seperately) inlcuding cost and conveyance of all materials and labour charges etc complete
24.6
-
241.11
Providing and fixing aluminium frame work for doors, windows, ventilators and partitions ( FRAMEWORK ) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and as per the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : For opening of manager room , projector room,& assistant manager room , partitions , front entrance fixed portion & windows etc.Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
180
-
513.5
For shutters of doors including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
100
-
592.92
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-chargePre-laminated particle board with decorative lamination on both sides for aluiminium doors
10
-
1135.76
Providing and fixing glazing in aluminium door, sliding door, window,ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness for ( for new AL joinery & old AL joinery)
90
-
1315.77
Providing and fixing glazing in frameless fixed portion of ticket counter partitions with patch fittings etc. with EPDM rubber / neoprene gasket etc. and making holes etc complete as per the architectural drawings and the directions of engineer -in-charge With frameless 10 mm thick toughened glass for ticket counter..
10
-
4394.83
Providing and fixing 5 mm zero reflection glass for opening of projectro room with EPDM rubber / neoprene gasket etc.complete as per the architectural drawings and the directions of engineer -in-charge .(Cost of aluminium FRAMEWORK shall be paid in basic item):
2
-
3328.47
Providing and fixing glazing in fixed portion of front entrane portions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer -in-charge .(Cost of aluminium FRAMEWORK shall be paid in basic item): With 10mm thick toughened glass for front entrance fixed potrtion.
10
-
3463.12
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5mm width
200
-
81.85
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS:3564,embossed on the body,door weight upto 3 kg and door width upto 700mm), with necessary accessories and screws etc.complete.
4
-
543.17
Providing and fixing ISI marked oxidised S.S .handles (304 grade) conforming to IS:4992 with necessary screws etc. complete.a) 300 mm
4
-
848
Providing and fixing ISI marked oxidised S.S .handles (304 grade) conforming to IS:4992 with necessary screws etc. complete.b) 600 mm
12
-
1563
Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
2
-
470.5
Powder coating on existing aluminium windows and doors with 50 micron polyester powder coating including removing and scraping the existing powder coating , cost and conveyance of all materials and labour charges etc coplete.
30
-
1507.6
Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture , including providing and fixing top and bottom pivot and spring type fixing arrangements and making necessary holes etc for fixing required door fittings, all complete as per the direction of Engineer in charge ( Door handle , lock and stopper etc to be paid seperately)
10
-
6040.35
Providing and fixing ISI marked oxidised S.S. handles conforming to IS:4992 with necessary screws etc. complete : 600 mm
4
-
1563
Providing and fixing ISI marked door lock (dorma) for frameless glasss door ,including cutting coutouts for lock fixing, cost and conveyance of all materilas and all labour charges etc complete.
2
-
3718
Providing and fixing Aluminium extruded section body tubular type universal hydraulic door closer ( having brandlogo with Isi ,IS 3564 , embossed on the body , door wirght up to 36Kg to 80 Kg and door width from 701 mm to 1000 mm ) with double spped adjust,ent with necessary accerries and screws etc complete.
8
-
509.03
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.- With stainless steel cover plate minimum 1.25 mm thickness.
4
-
2692.5
STRUCTURAL STEEL WORK
-
-
-
Structural steel work reveted , bolted or welded in builtup sections, trusses and framed work as per the drawing , including cutting hoisting fixing in position and applying a priming coat of approved steel primer, cost and conveyance of all materials and all labour charges etc complete including foundation work
5000
-
88.6
Steel work in built up tubular ( round, square or rectangular hollow tubes etc) trusses etc , including cutting , hoisting , fixing in position and applying a priing coat of approved steel primer including welding and bolted with sopaecial shaped washers etc complete (Generator, entrance gate & arch,new screen frame, over roof and sunshade all around the building ,purlins for fixing new sheet roof etc ) .
5000
-
118.28
Providing and fixing M.S Grill of required pattern in the openings with M.S flats, sq./round bars etc including applying priming coat with approved steel primer etc.
100
-
137.15
SHEET ROOFING
-
-
-
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.for over the existing roof of building, genrator platfoorm & transfomser paltform etc
1500
-
721.35
Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. - 0.80mm thick with zinc coating not less than 275gm/m²
150
-
797.3
Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to anypitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc.The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented,textured or smooth as specified2 mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified for deck panelling
5
-
1296.83
HANDRAIL
-
-
-
nd fixing hand rail of approved size by welding etc.to balcony railing, staircase railing and similar works etc as per the detailed drawings, including applying priming coat of approved metal primer etc (Top rail and master leg shall be 50mm dia SS 304 grade pipe,balustrade shall be of 32 mm Gi square tube with a reducer leg on top , intermediate vertical and horizontal members shall be 25 mm GI square tube. The height of hand rail is 105 cm, vertical members spacing is 10 cm etc as per direction of Engineer-in-charge.
35
-
2151
FLOORING
-
-
-
Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).( Basic price of tile Rs.55/ Sqft)600 mm x 600 mm (room 1 & room 2)
63
-
1532.81
Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting,riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).600 mm x 600mm (room 1 , room 2 & passage - 10 cm height )
6.55
-
1454.3
Providing and laying Glossy/matt/rustic finish Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).( Basic price of tile Rs.80/ Sqft)800mm x 800mm/1200 x1200 - (Lobby areas)
500
-
1922.91
Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting,riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).800mm x 800 mm - Looby area
22
-
2016.03
Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting,riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) - Step Riser
22
-
2858.55
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.600mm x 600 mm
69.55
-
218.93
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.800mm x 800 mm
500
-
175.95
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete for new toilet floor, pump room & electricla room (Basic price- Rs.45/-)
53
-
1085.53
Providing and fixing Ist quality ceramic glazed wall tiles of size 300mm x 450 mm or nearest conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.(Appr. tile cost Rs.45/ Sqft) for toilet wall wash area wall etc for new toilet,existing toilet of ht 30 cm etc (Basic price- Rs.47/-)
46
-
1114
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.(Appr. tile cost Rs.65/ Sqft) for Ticket counter wall
17
-
1188
Supplying and fixing vinyl flooring using adhessive,after cleaning and leveling the area, including cost and conveyance of all materilas and labour charges etc complete.( Vinyl cost - Appr. Rs.75 /sqft) for ramp area floor & wall up to a height of 60cm.
10
-
1609
Supplying and Fixing Loop file carpet for flooring including cost and conveyance of all materials and labour charges etc complete.(Loop file carpet- Rs.90/ Sqft)Theatre passage
100
-
2001
GRANITE WORK Providing and laying Polished Granite stone flooring (for steps )required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab - Black lepato for steps ( Cost Rs,200/ Sqft)
60
-
2402
Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite stone
150
-
322.01
PLASTERING
-
-
-
Repairs to plastering area of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls/ RCC surfaces / Ceiling by adding binding compound etc complete including disposal of rubbish to the dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 fine sand).
50
-
347.04
Plastering with cement mortar 1:4 (1 cement: 4 fine sand) for inside , out side of new walls 12 mm cement plaster finished with a floating coat of neat cement of mix for new plastered surface and old suraface wherever necessary for new rooms, fire tank,new projector room inside .
300
-
280.73
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12 mm thick cement plaster and adding and mixing water proofing material in the cement plaster work in proportion recommended by the manufacturers . For shade
10
-
307.6
Floor plastering-18mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 finished with a top layer 6mm thick cement plaster 1:6. yard demolishing portion.
20
-
334.92
PAINTING
-
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand ( Birla white) and manufacturer, over the new plastered wall surface and old surface wherever necessary to prepare the surface even and smooth complete for interior & exterior new walls
300
-
114.48
Painting priming coat on new plastered surfaces and old surfaces wherever necessary after making good the damages on wall surfaces and cleaning the surface including all charges for cost and conveyances, Labour charges etc. complete. with water thinnable cement primer on wall surface having VOC contenet less than 50 gms/Ltr foe new qalls
300
-
48.43
Painting inside wall & ceiling with two coats with ready mixed acrylic emulsion paint approved quality as specified over priming coat after rubbing with sand paper and cleaning the surface including all charges for cost and conveyances, Labour charges etc. completeTwo or more coats
5000
-
110.68
Finishing exterior walls surfaces [over stuco finshed surface] with premium Acrylic smooth exterior paint [Apex/equivalent] with silicone additives of required shade, two or more coates applied @1.43ltr/10sq.m over and including primimg coat of exterior primer applied @ 2.20kg/10sq.m.after washing and cleaning the fungai including all scafolding for all heights.
2500
-
126.86
Polishing on wood work with 2 coat polyurethene polish (mat finish ) of approved brand and manufacture over 2 coat of wood putty , 2coat of sealer and wood primer etc , icluding cost and conveyance of all materials and labour cahrges etc complete.
100
-
1031.65
Painting with iron primer (Zinchromate ) two coatsincluding all charges for cost and conveyances,Labour charges etc.complete for grill,steel frame work,GI sheet etc
250
-
96.01
Painting with synthetic enamel paint using approved quality paint as specified two coats over a priming coat for new & old iron work including all charges for cost and conveyances, Labour charges etc. complete.
300
-
102.75
WATER PROOFING WORK
-
-
-
Repairing,Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc, portico areas, verandahs, fire tank inside etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b)Second layer of slurry of cement @ 0.242 kg/sqm mixed with waterproofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
250
-
390.95
Supply and fixing ACP panels 3 mm thick fixing over 38mm x 25mm aluminium box frame including frame work, cost and conveyance of all materilas and labour charges etc complete
10
-
4463.77
AL LOUVERS
-
-
-
Supplying and fixing of louvers with sections using powder coated Aluminium INDAL section 1'''x 1/2" for vertically/ horizontally to be used as joining cleats .The entire louvers system to be fabricated of approved drawings , including cost and conveyance of all materials to site , labour charges for erection, lead and lift, transportation, handling charges, hire charges for scaffolding etc complete for frameless glass door top.
25
-
195
Supplying and fixing of louvers with sections using powder coated Aluminium INDAL section 2'' x 1" for vertically/ horizontally to be used as joining cleats .The entire louvers system to be fabricated of approved drawings , including cost and conveyance of all materials to site , labour charges for erection, lead and lift, transportation, handling charges, hire charges for scaffolding etc complete for front elevation .
80
-
343
Plywood for speaker platform & poster board
-
-
-
Supplying and laying 19mm thick Marine plywood over the frame work (paid separatly) with screws ,nut & bolts etc as per the detailed drawing ,including cost and conveyance of all materials , welding charges,unloading charges and all labour charges, polishing etc complete.(for Speaker plat form etc,) .
20
-
2938
Supplying and laying 16mm thick Marine plywood over the frame work (paid separatly) with screws ,nut & bolts etc as per the detailed drawing ,including cost and conveyance of all materials , welding charges, unloading charges and all labour charges, polishing etc complete.(for poster board etc,) .
16
-
2427
GRILLED ROLLING SHUTTER
-
-
-
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 -part 1 and M.S. top cover of required thickness for rolling shutters. (80x1.25mm M.S. laths with 1.25 mm thick top cover.)
6
-
3035.48
Providing and fixing ball bearing for rolling shutters.
4
-
497.11
Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge, (area of grill to be measured).
3
-
411
Painting with iron primer (Zinchromate ) two coats including all charges for cost and conveyances,Labour charges etc.complete for rolling shutter
13.5
-
96.01
Painting with synthetic enamel paint using approved quality paint as specified two coats over a priming coat for rolling shutter work including all charges for cost and conveyances, Labour charges etc. complete.
13.5
-
102.75
PLUMBING WORK .
-
-
-
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid.
7
-
4480.05
Providing and fixing white colour wash basin with C.I. brackets, 15 mm C.P. brass pillar taps and pvc connection,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap.
1
-
2381.82
Providing and fixing ornamental type health faucet (Superior quality Jagur company or equilant) etc. complete.
7
-
2571
Supplying and fixing Fancy type , beveled back coppered mirror of Indian make best quality [Jaguar make] with or with out wood frame etc. complete. (a) 450 mm x 700 mm
1
-
1129
(b) 2000 mm x 700 mm
1
-
2349
( c ) 1650 mm x 700 mm
2
-
2210
(d ) 1000mm x 700 mm
1
-
1606
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 600mm long towel rail with total length of 645mm,width 78mm and effective height of 88mm,weighing not less than 190 gms.
1
-
554
Providing and fixing PTMT urinal cock of approved quality and colour. 15 mm nominal bore,80mm long.42 mm high and 30mm wide with BSP female threads weighing not less than 48gms.
21
-
188.66
Supplying and providing SS soap dish of size 100 mm x 75mm of approved make and quality , including cost and conveyance of all materials and labour charges, fixing charges etc complete.
1
-
153
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors 100mm inlet and 100 mm outlet - Sand cast iron S&S as per IS: 3989, including cost and conveyance of all materials and labour charges,fixing charges etc complete. .
1
-
1355.75
Providing and fixing 100mm sand cast Iron grating for gully trap, including cost and conveyance of all materials and labour charges,fixing charges etc complete.
1
-
38.33
Providing and fixing brass bib cock of approved quality , including cost and conveyance of all materials and labour charges, fixing charges etc complete.
10
-
367.49
Supplying and fixing 125mm PVC circular gratings including cutting, chasing wall, floors and making good the same etc. ,including cost and conveyance of all materials and labour charges, fixing charges etc complete.
5
-
146
Supplying and fixing PVC Floor Trap 110mmx75mm size with Jali including cutting open, boring through walls, RCC slabs etc. and making good the damages.
5
-
511
Supplying and fixing good quality concealed type CP Brass Stop Cock (best quality, heavy) long body with flange in position.
15
-
715.52
Supplying and fitting CP brass long body tap 15mm dia [superior quality Jaguar or equivalent] for toilets
3
-
1312
Supplying threading, laying and jointing 20 mm nominal dia. PVC pipes (10 kg/cm2) and specials such as tees,bends,elbows,check nuts, etc. with clamps including cutting and making good the walls including all charges for cost and conveyances, Labour etc. complete
50
-
343
Supplying threading, laying and jointing 25 mm nominal dia. PVC pipes (12kg/cm2) & specials such as tees,bends,elbows,checknuts,etc. with clamps including cutting and making good the walls including all charges for cost and conveyances, Labour etc. complete
80
-
363
Supplying threading, laying and jointing 32 mm nominal dia. PVC pipes (12 kg/cm2) and specials such as tees,bends,elbows, checknuts,etc. with clamps including cutting and making good the walls including all charges for cost and conveyances, Labour etc. complete
50
-
408
Supplying threading, laying and jointing 63 mm nominal dia. PVC pipes (12kg/cm2) and specials such as tees,bends,elbows, checknuts,etc. with clamps for internal waste line works including cutting and making good the walls including all charges for cost and conveyances, Labour etc. complete
30
-
702
Supplying and fitting full way brass or gun metal wheel valve including all charges for cost and conveyances, Labour charges etc. complete - 20mm dia
2
-
428.63
Do - do 25mm dia
5
-
561.19
Do - do -32mm dia
5
-
656.28
Supplying and fitting 25mm brass or gun metal ball valve with polythene float for 15mm connection including all charges for cost and conveyances, Labour charges etc. complete
2
-
435.05
Supplying and fitting 15 mm CP short body tap including all charges for cost and conveyances, Labour charges etc. complete
6
-
467
Supplying and fitting 15 mm C P pillar tap for existing wash hand basin including all charges for cost and conveyances, Labour charges etc. complete
8
-
587.36
Supplying and fitting brass or gun metal 15 mm stop cocks including all charges for cost and conveyances, Labour charges etc. complete
15
-
340.88
Providing and fixing rigid PVC pipe (10kg/cm2) Complete with fittings and clamps including trenching and refilling etc complete for 40 mm outer dia.
5
-
199
Providing, laying and jointing rigid PVC soil waste and vent pipes with sockets of pressure class 4Kg/Cm2 through ducts, chasing/cutting of wall/concrete floors, including all charges for cost and conveyances, Labour charges, scafolding etc. complete- 110mm dia.
50
-
441
Do -- do -- 63mm diameter including clamps.
20
-
341
Providing and Fixing PVC moulded fittings/ accessories of pressure class 10 Kg/cm2 of approved quqlity for waste , vent inluding jointing with solvent cement etc complete - 110 mm plain bend .
5
-
231
Do -- do -- 110 mm plain TEE .
5
-
238
Do -- do -- 110 mm door TEE .
2
-
298
Do -- do -- 110 mm dia offset .
5
-
238
Do -- do -- 90 mm plain bend .
5
-
108
Do -- do -- 63 mm plain bend .
5
-
78
Do -- do -- 63 mm plain TEE .
5
-
81
Do -- do -- 63 mm END CAP .
5
-
56
iDo -- do -- 110 mm door bend .
5
-
241
Do -- do -- 90 mm door bend .
5
-
154
Do -- do -- 110 mm door Y .
3
-
270
Do -- do -- 90 mm door Y .
2
-
166
Do -- do -- 110 mm Vent cowl .
2
-
119
Do -- do -- 90 mm Vent cowl .
2
-
98
Do -- do -- 45 degree bend - 110 mm dia .
3
-
224
Do -- do -- 45 degree bend - 63 mm dia.
2
-
64
Providing and Fixing PVC Pipe clips to unplasticide PVC waste /vent pipes by means of 50 x50x50 mm hardwood plugs screwd with MS screws of required lemngth inluding cutting brickwork and fixing in cement mortar 1:4 , (1 cement and 4 coarse sand) and making good to the walls etc complete for 110 mm plain bend.
90
-
237.74
Do -- do -- For 75 mm plain bend
5
-
239.25
Supplying and jonting PVC pipes joined with solvent cement including trenching and refilling etc complete for 110 mm dia 6kg/cm2 including necessary specials.
10
-
388
Constructing sewer Manhole of size 90 cm x 80 cm inside and depth not exceeding 120 cm with 23cm thick walls of wire cut bricks in Cement mortar 1:6,plastering inside with cement mortar 1:3 ,12 mm thick with neat cement flushing coat and foundation concrete 20 cm thick and forming channels with cement concrete 1:4:8 using 40 mm broken stone providing RCC slab of size 1.06m x 1.06m x 0.75m size with necessary reinforcement and GI steps for manhole including all charges for cost and conveyances, Labour charges etc. complete
3
-
11374.5
Constructing a new drainage of size as per the drawing Earth work in excavation.
43.2
-
165.03
Do -- do -- PCC - 1:4:8 - 40 CM X 10 CM
10.8
-
5869.06
Do -- do -- Solid block -4''
16.2
-
6226.66
Do--do -Cement plastering1:3,12mm thick 2 coats
216
-
297.24
OTHER WORKS
-
-
-
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 100mm thick compacted bed of coarse sand and 50 mm thick 6 mm metal, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
1000
-
806.94
Providing and fixing uPVC Frame & shutter for below wash counter area Frame work below toilet wash counter Providing and fixing factory made solid Foam uPVC profile for frame (45x20m) work below toilet wash counter of approved shade, quality and make. The profile shall be laminated on both sides, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and the exposed edges sealed with PVC edge beading of same shade and colour. The frame shall be fire retardent with necessary screw SUB HEAD : 26- NEW TECHNOLOGIES AND MATERIALS 1615 holding capacity. Frame shall be fixed to wall using Expendable Fastner with necesary stainless steel screws, all complete as per direction of Engineer-incharge.Shutter work below toilet wash counter
20
-
386.16
Providing and fixing factory made shutter below toilet wash counter of 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge.
5
-
4634.35
Providing 8 cm thick light blocking partition wall at Sree entrance door , the partition shall be made of 12 mm V board on both sides of frame work , the frame work shall be made of GI RHS of size 50 mm x 25 mm (16 gauge) etc as per the detailed drawing etc, Including cost and conveyance of all materials to site, labour charges, ,hardware items, filling the joints with appropriate joining compound etc complete as per direction of Engineer-in charge.
12
-
4350
Proving V board wall panelling at Sree Lobby area , the panelling shall be made of 12 mm V board over the frame work , the frame work shall be made of GI RHS of size 25 mm x 25 mm (16 gauge) etc as per the detailed drawing etc, Including cost and conveyance of all materials to site, labour charges, ,hardware items, filling the joints with appropriate joining compound etc complete as per direction of Engineer-in charge.
76
-
2695
Strenghtneing of existing compound wall and repairing the fencing work wherever necessary etc complete - Earth work in excavation .
10
-
165.07
Do -- do -- PCC - 1:4:8 - 30CM X 10 CM
3
-
5869.06
Do -- do -- Brickwork in cm 1:6
10
-
6227.15
Do - do Cement plastering 1:4,12mm thick one coat
100
-
237.02
Do -- do -- Providing barbed wired fencing 2 strand on existing frames
162
-
779.34
Cleaning the septic tank,soakpit, drain and manhole etc including removing and refixing the cover slab,removing, the waste from site etc complete
30
-
575
Tube well + Borewell - 200ft depth Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools,plants & machineries required for the job, all complete as per directionof Engineer-in-charge, upto 90 metre depth below ground level.All types of soil 300 mm dia
35
-
485.84
-do- Rocky strata including Boulders300 mm dia
35
-
1120.69
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia
35
-
800.12
Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
1.5
-
1540.74
Development of tube well in accordance with IS : 2800 (part I) and IS:11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc.all as per requirement and direction of Engineer-in-charge.
2
-
710.6
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:200 mm dia
1
-
303.73
Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm clamp
2
-
1513.02
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 200 mm dia
2
-
332.83
Supply and fixing 1 1/2 HP Submersible pump of Approved make for tube well ,including cost and conveyance of all materilas and labour charges etc complete.
1
-
20184
Providing and placing on terrace polyethylen water storage tank, IS 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet,outlet and over flow pipes, but without fittings and the base support for tank. Circular tank
5000
-
9.5
Surface dressing on old surface with hot bitumen of grade VG-10 of approved quality using 1.95 kg of bitumen per sqm with 1.50 cum of stone chippings 11.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 tonne capacity, etc. complete.
100
-
147.77
Wall cupboard made of 18mm both side laminated marine plywood and PVC edge band lippings on the exposed edges etc as per the detailed drawing including cost and conveyance of all materials, harwares like hinges, drawer sliders & channels, locks and handles , labour charges for all work etc complete as per the direction of Engineer-in-charge.Ticket counter - 4.86 M x 50cm x 75 cm with shuttesr and 3 pedestal drawers etc , Back sdie shelf- 5 M x 40cm x 75cm with 10 shutter , Managers cabin - 2.4m x 2.10m
10
-
8465
Supplying and fixing LED signages Using PT class Acryilic sheet,LED module of approved make ,Poweron SMPS etc.The rate includes the cost of rounding off the corners, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in- charge. Rectangular area of the sheet only shall be measured for payment cost and conveyance of all materilas and labour charges, scaffolding charges etc complete.For Building & Front Arch
5
-
12861
Supplying and fixing information signages using ACP sheet & 3M Vinyl sticker , fixing it in position as per drawings,specification and direction of the engineer-in charge,cost and conveyance of all materilas and labour charges, scaffolding charges etc complete.Information signages
2.5
-
6248
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements