Kerala State Film Development Corporation Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 2,00,000Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_KSFDC_670476_1Tender No
5769/P1/19/KSFDCTender Authority
Kerala State Film Development Corporation Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
od321744/2019_2020 : Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in slabs, including the cost of required centering, shuttering but excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) : 3 graded stone aggregate 20 mm nominal size)
2
-
-
4.2.5 : Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size)
10.78
-
-
od321734/2019_2020 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. (Note :- Minimum Cement content considered in this item is @ 330 kg/cum. Additional cement requirement as per mix design shall be considered by the bidder while quoting, nothing extra shall be paid on this account.All work above plinth level upto floor V level
6.23
-
-
5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
910.9
-
-
5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
4
-
-
5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
44.39
-
-
5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
19.84
-
-
Masonry work
-
-
-
50.6.7.3 : Laterate masonry with neatly dressed laterate stone of size 40x20x15 cm or nearest size in cement mortar 1:6 for superstructure above floor two level upto floor five level including all cost of materials, labour charges etc.
35.33
-
-
od321725/2019_2020 : Solid block masonry using pre cast sold blocks (Factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part 1 of 1979 for Super structure above floor two level upto floor five level for 10 cm thick wall in: Cm 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding etc complete.
7.58
-
-
6.15 : Extra for providing and placing in position 2 Nos 6 mm dia M.S bars at every third course of half brick masonry.
75.81
-
-
Joinery works
-
-
-
21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
345.33
-
-
21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)
45.95
-
-
21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness
2.76
-
-
21.3.2 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness
7.45
-
-
21.4.1 : Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS: 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors including cost of cutting floors, embeding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer -in- Charge.With stainless steel cover plate minimum 1.25 mm thickness
8
-
-
21.18 : Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately)
19.2
-
-
9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood
0.57
-
-
9.12 : Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. ( Area of opening for glass panes excluding portion inside rebate shall be measured).
2.76
-
-
9.21.1 : Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non- decorative Type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
27.6
-
-
9.77 : Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete
8
-
-
9.84 : Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
10
-
-
9.97.3 : Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:200x10 mm
26
-
-
9.101.1 : Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Single rubber stopper
10
-
-
9.103 : Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS: 1868) aluminium lever handles of approved quality with necessary screws etc . complete.
11
-
-
9.121 : Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
23.2
-
-
9.122.2 : Providing and fixing to existing door frames.30 mm thick Fiberglass Reinforced Plastic (F.R.P) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used all filler material throughout the hollow panel, casted monoolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS : 14856, complete as per direction of Engineer-in-charge.
6.72
-
-
9.126.1 : Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows ( area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled and glazed shutters 25 mm to 40 mm thick.Marine plywood conformingto IS : 710
154.07
-
-
9.127.2 : Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss/ matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Types S, including cost of adhesive of approved quality.1.0 mm thick
154.07
-
-
9.139 : Providing and fixing panic bar / latch (Double point ) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer -in-charge, all complete.
3
-
-
9.161 : Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontalside & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mmthick GI sheet ( Zinc coating not less than 120gm/m2) suita2ble for mounting 120min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineralwool Insulation having density min 96Kg/m2 . The frame will have a provision ofG.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style ofsize M10 x 80 ) suitable for fixing in the opening along with Factory madeTemplate for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire ratedglazed shutter . The frame shall be finished with a approved fire resistant primeror Powder coating of not less than 30 micron in desired shade as per thedirections of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded
20
-
-
9.162 : Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 minFire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certifiedas per laboratory approved by Engineer-in-charge, with suitable mounting ondoor frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mmwide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet(zinc coating not less than 120gm/m²) duly filled mineral wool insulation havingdensity min 96 kg/m³ and fixing with necessary stainless steel ball bearing hingesof size 100x89x3mm of approved make, including applying a coat of approvedfire resistant primer or powder coating not less than 30 micron etc all completeas per direction of Engineer-in-charge (panelling to be paid for seperately
5.38
-
-
9.164 : Providing and fixing glazing in fire resistant door shutters, fixed panels & partitionsetc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mmfrom the edges and 150 mm c/c , including applying a coat of approved fire resistantprimer/powder coating of not less than 30 micron on G.I. beading, & special ceramictape of 5 x 20 mm size etc complete in all respect as per direction of Engineer-incharge.The glass shall be clear, toughened, interlayered, non-wired fire resistant having11 mm thickness of approved brand with 120 minutes of fire resistance both integrity &radiation control (EW120) and minimum 15 min of insulation (EI15) and having a soundreduction of ?37dB and LT of 86%. Glass shall be compliant to class 2(B)2 category ofImpact Resistance as per EN 12600. The glass should be manufactured in UL & TUVaudited Facility and including UL-EU Certification.The maximum glazing size cannotbe more than 1100 mm x 2200 mm (w x h) or 2.42 sq mts in total area. The test report forthe complete system (Glazed Door or Partition) will be considered valid only if it containsthe stamp and signature of the authorized signatory from the glass manufacturer.(Actual glass size is to be measured at site for payments).
1.35
-
-
9.165.1 : Providing and fixing bright /matt finished Stainless Steel handles of approved
quality & make with necessary screws etc all complete.125 mm
3
-
-
od283/2020_2021 : Supplying and fixing cement bonded particle board of thickness 20 mm over already laid steel frame work with self drilling screws to form raised false flooring as per approved drawings .The rate shall include cost and conveyance of all materials, labour charges etc. complete for all levels and as directed by the Engineer-in-Charge.
406.05
-
-
od104792/2023_2024 : Supplying And Fixing Hook Lock Glass to Glass for Frameless glass double door with 60mm EPC - both side key , all complete as per approved drawings and as directed by engineer in charge.
4
-
-
od104946/2023_2024 : Providing and fixing a pair of back to back D type pull Handle of 25 mm Dia X 300 mm size ,mirror polished SS 304 grade with all fixtures and necessary ss screws etc.including cost and conveyance of all materials,labour charges,lead,lift etc complete as directed by the Engineer-in-Charge at all levels.
8
-
-
od105258/2023_2024 : Providing and fixing 12mm thick toughened glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge
4.3
-
-
od321740/2019_2020 : Supplying And Fixing a pair of fire rated Solid SS Lever Handle and Mortise Lock case with Cylinder of approved size and quality for fire rated steel doors etc complete all works including all required fixtures as directed by Engineer in Charge.
3
-
-
od323119/2019_2020 : Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC /aluminum sliding window with necessary screws etc. complete.
11
-
-
Flooring works
-
-
-
11.21.1.1 : Providing and fixing 10 mm thick acid and /or alkali resistant tiles of approved make and colour using acid and / or alkali resisting mortar bedding, and joints filled with acid and /or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in-Charge.In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)Acid and alkali resistant tile
11.1
-
-
11.21.2.1 : Providing and fixing 10 mm thick acid and /or alkali resistant tiles of approved make and colour using acid and / or alkali resisting mortar bedding, and joints filled with acid and /or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in-Charge.In dado/ skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)Acid and alkali resistant tile
2.87
-
-
11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
348.17
-
-
11.46.2 : Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
41.28
-
-
11.47.2 : Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer,in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm
158.76
-
-
11.48.2 : Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm
194.68
-
-
11.49.2 : Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tiles 600x600 mm
35.92
-
-
od1686/2020_2021 : Providing and fixing PVC tile edging to match the wall tiles and finishing as directed by the Engineer-in-Charge at all levels.
29.4
-
-
8.2.2.2 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm
3
-
-
8.5 : Extra for providing opening or required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
5
-
-
8.9.1.2 : Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.Granite of any colour and shade
11.1
-
-
Steel work
-
-
-
od321720/2019_2020 : Steel work in built up tubular sections YST 310 grade as per IS: 4923 including cutting, bending, hoisting, fixing in position, welded and bolted including special shaped washers etc. complete with electric resistance or induction butt welded tubes including painting with two coats of approved make and colour synthetic enamel paint over two coats of approved make anticorrossive yellow zinc chromate primer, closing all the open ends properly with same material cost and conveyance of all materials, labour, etc., complete as directed by the Engineer-in-Charge at all levels.
12541.88
-
-
od321721/2019_2020 : Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying two coats of approved make and colour synthetic enamel paint over two coats of approved make anticorrossive yellow zinc chromate primer, etc. including cost and conveyance of all materials, labour, lead,lift etc. complete as directed by Engineer- in-Charge at all levels In gratings, frames, guard bar, ladders, railings, brackets, gates similar works.
14130.15
-
-
od321726/2019_2020 : Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying two coats of approved make and colour synthetic enamel paint over two coats of approved make anticorrossive yellow zinc chromate primer, etc. including cost and conveyance of all materials, labour, scaffolding, lead,lift etc. complete as directed by Engineer- in-Charge at all levels. In stringers, treads, landings etc of staircases including use of chequered plate wherever required, all complete
4989.41
-
-
10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
1260
-
-
od321736/2019_2020 : Providing and fixing Queue manager posts in stainless steel 202 grade having height 910mm and base diameter 320 mm with tube of 63.5 mm diameter . The length of the rectractable polyester tape is approx. 2.25 m. The tape shall be 48mm in width. The overall weight of the post will be approx. 8.5kg with cassette consisting of three receiving and one extension end for four way connectivity. The rate is including cost and conveyance of all materials, labour charges, sundries,lead,lift etc complete as directed by the Engineer in charge at all levels.
6
-
-
od120/2020_2021 : Providing and fixing M.S round holding down bolts with nuts and washer plate including two coats of approved make and colour synthetic enamel paint over two coats of approved make yellow zinc chromate primer,including cost and conveyance of all materials, labour charges,lead,lift etc complete as directed by Engineer-in-Charge
25.28
-
-
od582/2020_2021 : Providing and fixing light duty Cast Iron Manhole covers including cost and conveyance of all materials,labour charges,lead,lift etc complete as directed by Engineer in Charge 600x600mm
5
-
-
12.14 : Providing flat iron brackets 50x3 mm size with necessary bolts, nuts and washers etc. for fixing asbestos cement / G.S. sheet gutters with purlins.
50
-
-
False ceiling and roofing works
-
-
-
12.45.3 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board
362.31
-
-
od321728/2019_2020 : supply and installation of false ceiling using fibre cement board of TPI make manufactured or equivalent of thickness 8 mm and dimension 1220 mm x 2440 mm at all height shall be fixing on GI section 45 x 15 x 0.9 mm running at spacing of 1000 mm centre to centre, to which this ceiling section having its of 10.5 mm , at 450 mm centre to centre , shall be fixing in a direction perpendicular to G.I intermediate channel with connecting clip fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall / partition with the help of rawl plugs at 450 mm centre , with 25 m long dry wall screws @230 mm interval .
403.68
-
-
12.50 : Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
24.03
-
-
od314434/2020_2021 : Providing and fixing Gutter ( excluding gutter support) in required width (upto a maximum of 1200mm girth) with plain galvalume colour coated sheet made out of 0.5mm TCT, minimum 300 MPa cold rolled steel with hot dip metallic coating of Aluminium Zinc alloy (Galvalume) 150 gms/sqm,total of both sides, AZ 150 as per ASTM A 792 or AS1397, with polyester colour coating including cost and conveyance of all materials, scaffolding, lead,lift, labour charges etc. complete at all levels as directed by Engineer-in-Charge
50
-
-
Finishing works
-
-
-
13.1.2 : 12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).
524.03
-
-
13.7.1 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)
58.6
-
-
13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
100
-
-
13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
2156
-
-
13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
1390
-
-
13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
766
-
-
Dismantling and demolishing
-
-
-
15.3 : Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.
2.03
-
-
15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar
2.52
-
-
19.7.3.1 : Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 120x 90 cm and 90 cm deep including C.I. cover with frame ( heavy duty ) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg ( weight of cover 108 kg and weight of frame 100 kg)With common burnt clay F.P.S. ( non modular) bricks of class designation 7.5
3
-
-
22.5 : Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
58.6
-
-
od321737/2019_2020 : Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.: 200 mm dia RCC pipes.
50
-
-
Acoustic
-
-
-
od92335/2022_2023 : Providing and fixing of 50mm thk 1000gsm density micron in between G.I frame work finish with Black,Crape fabric as approved FRAME - G.I.frame fabricated with 50 x 37.5 x 0.5 G.I, section @ 1220mm,c/c in horizontal direction fixed to or away from wall surface on necessary 50 x 50mm wooden, dutta,support with 50mm Air gap, above, section have Ceiling sections of 80 x 26 x 0.5 @ 400mm c/c in,vertical direction with 50mm thk 1000gsm density micron in between, section frame fixed with chicken,mesh backing of G.I 12x12mm square of 24 guage (as per approved sample), including scaffolding,machine screw, etc complete.Work,will be carried out as per drg and instruction of Acoustic consultant/ Site,Engineer /Architect.FINISH: Entire frame /Micron shall be finish with (FR) Black Crape fabric as,approved,NOTE :All the wood shall be used will be coated with Fire painting and necessary Anti-termite,treatment and All the frame work to be considered of Gypsum India company and All the Wooden dutta will,have 100x100x12mm thk (Insu Sound-Bcap rubber of Supreme ) behind between wall and wooden dutta
130
-
-
od92336/2022_2023 : Providing and fixing - 03 layer of 12.5mm thk plain gypsum board One side of M.S stud section frame work,in staggered joint screwed to stud frame as per drawing FRAME - GI Stud frame fabricated with 146 x 34,x 36 x .55, section @ 600 mm c/c in one diection with necessary 50 x 50mm wooden support as,required as per site condition, including 75mm thk 1000gsm density micron fixed with chicken mesh back,of G.I 12x12mm square of 24 guage and Black Crape fabric from back side of framing,including scaffolding,etc complete. Work will be carried out as per drg and instruction of Acoustic consultant/ Site Engineer /,Architect.,JOINTS - All joints of Gypsum panels filled and finished with India Gypsum jointing,compound, jointing tapes etc.complete as per manufacturer specification for joint,TOP COAT -Final,Layer of Gypsum shall be finished with Black Paint as approved by Architect / till the satisfaction of site,Engineer
160
-
-
od92337/2022_2023 : Providing and fixing stretch fabric gripper system (UK) UPVC Grippers,standard,cove mono,edge, but as required by design and manufacture's specifications.CORE - Fire retardant compressible polyster padding of 25mm thk including,scaffolding etc complete.Work will be carried out as per drg and instruction of Acoustic Consultant/ Site Engineer /Architect.FRAME : Gripper fix on 75 x 12mm ply (fire retardant) patty with 25 mm thk Polyster padding as required by design.INSTALLATION:Installation in accordance with drawings and manufacturer's instruction. Installation of grippers in maximum fabric without wrinkles or folds, maintaining horizontal/ vertical alignment of warp/woof of fabric, force fabric edges into clamping jaws, using tools and techniques that will not damage finish of the fabric complete to the satisfaction of the site Engineer-In-Charge. SUBMITTALS : Shop drawings indicating location, size, type,including frame, core and fabric finish components, for each panel in project. Drgs indicating construction details of interface with adjacent construction. The rates shall includes the shapes, pattern as mentioned in the drawing indicating graphics if any.
574
-
-
od92338/2022_2023 : Providing and fixing first ceiling on roof in 01 layer of 12.5mm thk Indian E-board with 50mm thk 1000gsm,denisty micron in between G.I frame work FRAME - G.I.frame fabricated with 45 x 15 x 0.8 mm thk,Intermediate, channel @ 900mm c/c in one Direction and Ceiling sections 80 x 26 x 0.5 @ 450 mm c/c in,other direction including perimeter channel as required and 25x25x0.55mm ceiling angle securely fixed to,structural sofit hangers/purlins @ 1220mm c/c, last ceiling angle not more than 600mm from adjacent,wall, connecting clips etc as required with 50mm thk 1000gsm density micron, including machine screw,levelling and scaffolding, etc complete. Work will be carried out as,per drg and instruction of Acoustc,consultant /,Site Engineer /Architect.,FINISH: Entire frame /Micron shall be cover with 01 Layer of,12.5mm thk Plain Gypsum JOINTS - All joints of panels filled and finished with India Gypsum jointing,compound jointing tapes etc.complete as per manufacturer specification for joint NOTE :All the frame,work to be considered of Gypsum India company
452
-
-
od92339/2022_2023 : Providing and Installing screen supporting from floor in 2mm thk 18 guage M.S pipe 50mm dia external,frame and 25mm dia internal frame including Elbow as per detail drawing with 100x100x19mm thk (Insu,Sound-Bcap rubber of Supreme) backing on floor and slab above behind base plate, MS pipe shall be,finished with Black Paint, Work will be carried out as per drg and instruction of Acoustic consultant, site,Engineer/Architect.
96
-
-
od92340/2022_2023 : od43947/2022_2023,Providing and fixing false ceiling in 01 layer of 595 x 595 x 12.5mm thk perforated gypsum tile with 50mm,thk 1000gsm denisty micron in between G.I frame work in RP Tissue bag FRAME - G.I.frame fabricated,with 45 x 15 x 0.8 mm thk Intermediate, channel @ 1220mm c/c in one Direction and Ceiling sections 80,x 26 x 0.5 @ 300mm c/c in other direction including perimeter channel as required and 25x25x0.55mm,ceiling angle securely fixed to structural truss/members above @ 1220mm c/c, last ceiling angle not more,than 610 mm from adjacent wall, connecting clips etc as required with 50mm thk 1000 gsm density,micron in Black RP Tissue bag, including scaffolding, cutting of spot light, AC diffuser, return air grill,Sprinkler and any other services cutout and providing necessary 6mm thk ply support and redoing the same in,good finish etc complete. Work should be carried out as per drawing and instruction of Acoustc consultant /,Site Engineer /Architect etc at all levels
370
-
-
od92341/2022_2023 : Providing and fixing of M.S speaker platform in M.S angle of 75mm X 75mm as per drawing with 02 layers,of 19mm thk Ply above frame with fabrication, levelling etc complete including one coat of red oxide paint,and two coat of Black paint as approved M.S. angle will be supported at 1200mm c/c with the,L' bracket,The bracket will have 12mm thk (Insu Sound-Bcap rubber of Supreme) in between wall and bracket. The,instruction of acoustic consultant /Site Engineer /Architect.depth of the platform will be as per site.Work,will be carried out as per drawing and direction as per Engineeri in charge
30
-
-
od92342/2022_2023 : Providing and fixing 01 layer of 595 x 595 x 12.5mm thk perforated gypsum tile with 50mm thk 1000gsm,density micron in between G.I frame work finish with Black water base paint as marked in drawing (1200,x 1200mm in,L' shape) FRAME - G.I.frame fabricated with 50 x 37.5 x 0.5 G.I, section @ 1220mm c/c,in horizontal direction fixed to or away from wall surface on necessary 50 x 50mm wooden, dutta,support with 50mm Air gap, above, section have Ceiling sections of 80 x 26 x 0.5 @ 400mm c/c in,vertical direction with 50mm thk 1000gsm density micron in between, section frame fixed with chicken,mesh backing of G.I 12x12mm square of 24 guage (as per approved sample), including scaffolding,machine screw, etc complete.Work,will be carried out as per drg and instruction of Acoustic consultant/ Site,Engineer /Architect.FINISH: Perfoated gypsum tile shall be finish with Black Water base paint as,approved ,NOTE :All the wood shall be used will be coated with Fire painting and necessary Antitermite,treatment and All the frame work to be considered of Gypsum India company and All the Wooden,dutta will have 100x100x12mm thk (Insu Sound-Bcap rubber of Supreme ) behind between wall and,wooden dutta
68
-
-
od92343/2022_2023 : Providing and fixing of Black Crape fabric on perforated gypsum ceiling tile with 75x12mm thk (FR) Ply,patty as per grooves and pattern mentioned in drawing in line and level including scaffolding etc complete,Work will be carried out as per drg and instruction of Acoustic Consultant / Site Engineer /Architect. Basic,Rate of Fabric- = Rs - 225/mtr NOTE : Install Crape fabric without wrinkles or folds maintaining,horizontal/vertical alignment of warp/ woof of fabric using technique that will not damage the finish of,fabric
370
-
-
od92344/2022_2023 : Providing and fixing of size 450 x 300 x 19mm thk Ply for the speaker bracket fixing on wall with 100 x100 x,19mm thk (Insu Sound-Bcap rubber of Supreme) 04 nos in between ply and wall as per detail etc complete.,Work will be carried out as per drg andinstruction of acoustic consultant /Site Engineer /Architect.
28
-
-
od92345/2022_2023 : Providing and fixing of the acoustical mineral fiber ceiling tile of 0.75NRC value on the, Grid system,from the Armstrong, AMF, Ecophon or any euivalent approved in the exit passege, including cutting of,spot light , Sprinkler and any other related services cut out providing necessary 6mm thk ply support and,redoing the same in good finish complete.Work will be carried out as per drg and instruction of acoustic,consultant /site Engineer /Architect.
150
-
-
od92346/2022_2023 : Providing and fixing 1 layer of 08mm thk site Perforated (08mm Random holes),E board with 50mm thk,1000gsm denisty micron in between G.I frame work as per drawing.FRAME - G.I.frame fabricated with 50,x 37.5 x 0.5 G.I, section @ 1220mm c/c in horizontal direction fixed to or away from wall surface on,necessary 50 x 50mm wooden, dutta support with 50mm Air gap, above, section have Ceiling,sections of 80 x 26 x 0.5 @ 400mm c/c in vertical direction with 50mm thk 1000gsm density micron in,between, section frame fixed with chicken mesh backing of G.I 12x12mm square of 24 guage (as per,approved sample), including scaffolding, machine screw, etc complete.Work,will be carried out as per drg,and instruction of Acoustic consultant/ Site Engineer /Architect. Up to 2.1m wall ht.,NOTE :All the wood,shall be used will be coated with Fire painting and necessary Anti-termite treatment and All the frame work to,be considered of Gypsum India company and All the Wooden dutta will have 100x100x12mm thk (Insu,Sound-Bcap rubber of Supreme ) behind between wall and wooden dutta
136
-
-
od92347/2022_2023 : Labour charges for Fixing departmentally supplied white perforated Galalite screen on the M.S screen,frame including scaffolding. Work will be carried out as per drawing and instruction of acoustic consultant,Site Engineer /Architect.
100
-
-
od92348/2022_2023 : Providing and making of the isolation base for the main speaker as per drg in 02 layer of 19mm thk ply and in,between ply have 01 layer of 100 x 100 x 25mm thk rigid rubber pads on all four sides and keep 25 mm thk,32kg/m3 gsm density glass wool in between ply.Base shall be covered with Black resin and shall be,mounted on 2 layer of 150 x 150 x 25mm thk rubber of sylomor @ 04 corners, etc complete as per detail.,Work will be carried out as per drg and instruction of acoustic consultant /Site Engineer/Architect. ( Isolation,Base size = 750mm X 600mm )
2
-
-
od92349/2022_2023 : Providing and fixing of the Black color powder coated M.S pipe hand railing of 50mm dia along the wall,fixed with 100 x 100 x 6mm thk Base plate support system with 100 x 100 x 12mm thk (Insu Sound-Bcap,rubber of Supreme), behind base plate on the wall @ 1200mm c/c in line and level as per site, etc,complete. Work will be carried out as per drg and instruction of acoustic consultant / Site Engineer,/Architect.
20
-
-
od92350/2022_2023 : Providing and making of the isolation base for the subwoofer as per drg in 02 layer of 19mm thk ply and in between ply have 01 layer of 100 x 100 x 25mm thk rigid rubber pads on all four sides and keep 25 mm thk 32 kg/m3 density Glass wool in between ply The base shall be covered with Black resin and shall be mounted on 2 layer of 150 x 150 x 25 mm thk rubber of sylomor @ 04 corners, etc complete as per detail. Work will be carried out as per drg and instruction of acoustic consultant /Site Engineer/Architect. ( Isolation Base size = 1200mm X 900mm )
6
-
-
od92351/2022_2023 : Providing and fixing false ceiling in 01 layer of 12.5mm thk Indian Gypsum Plain board with 50mm thk,1000gsm denisty micron in between G.I frame work FRAME - G.I.frame fabricated with 45 x 15 x 0.8 mm,thk Intermediate, channel @ 1220mm c/c in one Direction and Ceiling sections 80 x 26 x 0.5 @ 450mm,c/c in other direction including perimeter channel as required and 25x25x0.55mm ceiling angle securely,fixed to structural truss/members above @ 1220mm c/c, last ceiling angle not more than 610 mm from,adjacent wall, connecting clips etc as required with 50mm thk 1000 gsm density micron in Black RP,Tissue bag, including scaffolding, cutting of spot light, AC diffuser, return air grill, Sprinkler and any other,services cutout and providing necessary 6mm thk ply support and redoing the same in good finish etc,complete.Work,will be carried out as per drg and instruction of Acoustc consultant / Site Engineer /Architect,JOINTS - All joints of panels filled and finished with India Gypsum jointing compound jointing tapes etc.,complete as per manufacturer specification for joint TOP COAT Entire face of ceiling finished with two,coats of top coat as per manufacturers specifications. Three coats of matt paint colour as approved by,Architect till the satisfaction of site Engineer
32
-
-
od92352/2022_2023 : Providing and fixing 1 layer of 12.5mm thk Perforated gypum board with 50mm thk 1000gsm density micron in,between G.I frame work as per drawing.FRAME - G.I.frame fabricated with 50 x 37.5 x 0.5 G.I, section,@ 1220mm c/c in horizontal direction fixed to or away from wall surface on necessary 50 x 50mm,wooden, dutta support with 50mm Air gap, above, section have Ceiling sections of 80 x 26 x 0.5 @,400mm c/c in vertical direction with 50mm thk 1000gsm density micron in between, section frame fixed,with chicken mesh backing of G.I 12x12mm square of 24 guage (as per approved sample), including,scaffolding, machine screw, etc complete.Work,will be carried out as per drg and instruction of Acoustic,consultant/ Site Engineer /Architect.Above 2.1m average Ht.,NOTE :All the wood shall be used will,be coated with Fire painting and necessary Anti-termite treatment and All the frame work to be considered of,Gypsum India company and All the Wooden dutta will have 100x100x12mm thk (Insu Sound-Bcap rubber,of Supreme ) behind between wall and wooden dutta
240
-
-
od92353/2022_2023 : Providing and fixing of 800gsm cut pile carpet with 06mm thk underlay to be fixed on cinema tiers as per,design and drawing of Architect, Surface shall be clean properly before installing carpet, Carpet shall be fix,with adhesive as per manufacture specifications, in perfect line and level , no joints should be visible, All as,per approved design, shade and make etc complete. Complete work will be carried out as per drg and,instruction of site Engineer/Architect, (Basic Rate of Carpet- = Rs - 800/sq.mt)
444
-
-
od92354/2022_2023 : Providing and fixing of M.S, channel of 100 x 50 x 6mm @ 1200mm C/C as per drawing and wherever,required as per site requirement for supporting A/C ducts, False,ceiling with necessary support from,,beam including weilding, grinding, scaffolding, Channel shall be finished with 01 coat of Red oxide and 02,coat of Black Paint etc complete. Work will be carried out as per drg and instruction of structural consultant,/site Engineer/Architect.
3000
-
-
od92355/2022_2023 : Providing and fixing of the M.S speaker platform in M.S angle 75x 75mm as per drawing for the sub woofer,Base for Atmos speaker supported from the wall with 12mm thk (Insu Sound-Bcap rubber of Supreme),between the M.S frame and wall to avoid Vibrational sound in structure, including 2 layers of 19mm thk ply,and 01 layer of 19mm thk rigid rubber on ply complete with necessary weilding, grinding levelling etc.,complete including one coat of Red oxide paint and two coat of Black paint as approved by Architect,Vendor to give necessary shop drawing for the same for structural consultant approval Work will be,carried out as per drg and instruction of acoustic consultant/Site Engineer/Architect ( Platform size : 1350 X,1000mm)
4
-
-
od92356/2022_2023: Providing & fixing 560mm c/c push Back Chair which has simultaneous movement of seat and back, with an Auto Stop at all places, It will have Lateral movement of the back and an inclined movement of the
seat to have ergonomic comfort
Back of Chair : 15mm thk bent plywood of size 470 x 130 x 640 to 770mm height (as required by the Architect) with Poly Urethane foam of same size having density of 48kg/m3. Back to be covered with foam laminated fabric with back quilt design.Seat of chair : 19mm thk
plywood seat, size 480 x 490 x 19mm thk with Poly Urethane foam of same size having density of
50kg/m3 and fully covered with foam laminated fabric.
Push Back:Ø A metal sheet mechanism duly embossed of size 450 x 440 x 1.6 mm.Ø Block to be 2 triangular blocks duly embossed – 300 x 300 mm with 4 of 9mm holes.
Ø Longitudinal tubes of size 40 x 20 x 490 mm – with 2 tubes each and 4 longitudinal tubes of size 20 x 6 mm duly bent in shape to shape Riveted / Welded & approximately 350 mm long.
Ø Seat Back Bracket Interconnected / Riveted / Welded and Back Bracket to be 200 x 60 x 1.6 mm
Ø Seat Bracket to have stopper cup with 5 rivets and approximately 170 x 340 x 1.5 mm – 2 pairs for Seat / Back.
Ø All rivets to be with nylon washers and pneumatic machine only.
Ø Rollers to withstand temperatures up to 200° and of sizes – 22 mm width & 38 mm Dia, duly riveted and welded supported by metal sheet of size 30 mm x 120 mm – 1 pair. Ø All stopper material to be reinforced by nylon tubes of size 30 mm.
Ø Metal stand to be 300 x 300 x 3 mm duly bent in 1 piece supported by 3 structures 20 x 40 x 270 mm each.Side Panels: All side panels to be of 12mm thk plywood fused with foam laminated fabric to cover all metal parts.
UPHOLSTERY FABRIC :Upholstery of chair to be in 100% polyester stretch fabric which is fused with 5 mm / 7.5 mm foam and net backing, wherever quilting is required.
Handles :
To be of size 425 x 25 x 55 / 70mm depending on the ctc of the chair as per drg Cup holders : 460 x 100 x
40mm duly ribbed and supported by 12mm plywood 350 x70mm cushioned and upholstered. Installation :
chairs to be bolted to the ground using chemical fasteners of Hilti or any other similar brand.
300
-
-
od92357/2022_2023 : Providing and fixing 1 layer of 08mm thk site Perforated (08mm Random holes),E' board with 50mm thk,1000gsm denisty micron in between G.I frame work as per drawing.FRAME - G.I.frame fabricated with 50,x 37.5 x 0.5 G.I, section @ 1220mm c/c in horizontal direction fixed to or away from wall surface on,necessary 50 x 50mm wooden, dutta support with 50mm Air gap, above, section have Ceiling,sections of 80 x 26 x 0.5 @ 400mm c/c in vertical direction with 50mm thk 1000gsm density micron in,between, section frame fixed with chicken mesh backing of G.I 12x12mm square of 24 guage (as per,approved sample), including scaffolding, machine screw, etc complete.Work,will be carried out as per drg,and instruction of Acoustic consultant/ Site Engineer /Architect.UP TO 1200MM HEIGHT,NOTE :All the,wood shall be used will be coated with Fire painting and necessary Anti-termite treatment and All the frame,work to be considered of Gypsum India company and All the Wooden dutta will have 100x100x12mm thk,(Insu Sound-Bcap rubber of Supreme ) behind between wall and wooden dutta
28
-
-
od92358/2022_2023 : Providing and fixing G.I frame work paneling with 50mm thk 1000gsm denisty micron in between G.I frame,work as per drawing.FRAME - G.I.frame fabricated with 50 x 37.5 x 0.5 G.I, section @ 1220mm c/c in,horizontal direction fixed to or away from wall surface on necessary 50 x 50mm wooden, dutta support,with 50mm Air gap, above, section have Ceiling sections of 80 x 26 x 0.5 @ 400mm c/c in vertical,direction with 50mm thk 1000gsm density micron in between, section frame fixed with chicken mesh,backing of G.I 12x12mm square of 24 guage (as per approved sample), including scaffolding, machine,screw, etc complete.Work,will be carried out as per drg and instruction of Acoustic consultant/ Site,Engineer /Architect. wall panelling above 1.2m ht,NOTE :All the wood shall be used will be coated,with Fire painting and necessary Anti-termite treatment and All the frame work to be considered of Gypsum,India company and All the Wooden dutta will have 100x100x12mm thk (Insu Sound-Bcap rubber of,Supreme ) behind between wall and wooden dutta
100
-
-
od92359/2022_2023 : Providing and fixing of the M.S bracket in square box pipe of 50x50mm for the speaker bracket for Atmos,speaker from the ceiling to be supported from the sub frame of M.S truss girder with necessary base,plate and 12mm thk(Insu Sound-Bcap rubber of Supreme) at Junction to avoid Vibrational sound in,structure, including necessary weilding,grinding finished with 1coat of Red oxide and 2 coat of Black Paint,etc complete.Vendor to give necessary shop drawing for the same for structural consultant approval,Work will be carried out as per drg and instruction of acoustic consultant/Site Engineer/Architect
32
-
-
od92360/2022_2023 : Applying 3coats of Plastic paint of approved make and shade of Asian paint or Nerolac or ICI Dulux, Surface shall be clean and sanding by sand paper and applying one coat paint and putty and again sanding and leveling and two coats of paint till approved and satisfaction of Architect to shade colour including scaffolding etc complete work will be carried out as per drg and instruction of acoustic consultant /Site Engineer/Architect
100
-
-
od92361/2022_2023 : Providing and fixing of the 150mm wide x 37.5mm thk wooden moulding, Design as per Architect approved,in side wall panelfix with necessary support on G.I frame work. Mooulding will be finished with Melamine,polish as approved and satisfied by Architect inccluding machine sanding,applying hard putty, scaffolding,etc complete. work will be carried out as per drg and instruction of acoustic consultant / Site Engineer,/Architect.,NOTE :All the wood shall be used will be coated with Fire painting and necessary Antitermite,treatment. RAll the G.I frame work to be considered of Gypsum India company
224
-
-
od92362/2022_2023 : Providing and Fabricating 1200mm x 900mm x 450mm(for tender to be provided as per system supplier,drawings) fire cabinet boxes in all the theatres made from 12mm thk,E'-board finished with 1.5mm matt,Black laminate. 100x30 Salwood shutter frame. 6mm Modi Flat Clear Glass with frosted film fitted in the,frame with 6mm neoprene ‘U’ gaskets. 2 UNION make heavy duty SS hinges. 1 UNION Matt Black water,based paint etc complete for intended use in every respect, Work will be carried out as per drg and,instruction of MEP consultant / Site Engineer/Architect
4
-
-
od92363/2022_2023 : Providing and fixing of the 50mm wide x 37.5mm thk wooden moulding, Design as per Architect approved,in side wall panelfix with necessary support on G.I frame work. Mooulding will be finished with Melamine,polish as approved and satisfied by Architect inccluding machine sanding,applying hard putty, scaffolding,etc complete. work will be carried out as per drg and instruction of acoustic consultant / Site Engineer,/Architect. ,NOTE :All the wood shall be used will be coated with Fire painting and necessary Antitermite,treatment.All the G.I frame work to be considered of Gypsum India company
250
-
-
od92364/2022_2023 : Providing and fixing G.I frame work for Black PP fabric masking as per drawing.FRAME - G.I.frame,fabricated with 50 x 37.5 x 0.5 G.I, section @ 1220mm c/c in horizontal direction fixed to or away from,wall surface with top and bottom section and,necessary 50 x 50mm wooden dutta if any required as per,site condition, Above, section have Ceiling sections of 80 x 26 x 0.5 @ 400mm c/c in vertical direction,including scaffolding, machine screw , etc complete.Work will be carried out as per drg and instruction of,Acoustic consultant / Site Engineer /Architect. FINISH: Black PP fabric shall be finish on 75x12mm (FR),ply patty as per shapes,pattern as mentioned in the drawing on G.I frame work, NOTE :All the wood,shall be used will be coated with Fire painting and necessary Anti-termite treatment and All the frame work to,be considered of Gypsum India company and Install PP fabric without wrinkles or folds maintaining,horizontal/vertical alignment of warp/ woof of fabric using technique that will not damage the finish of,fabric,
60
-
-
od92365/2022_2023 : Providing and fixing of the 19mm thk FR ply Shutter in Black masking for Sound box access finished with,Black PP Fabric from outside and Black Paint from inside, including the necessary frame for fixing shutter and,hinges-02 no Concealed Handle, Bolkage etc complete. Work will be carried out as per drg and,instruction of acoustic consultant /Site Engineer/Architect. Shutter size -750 X 1200mm
4
-
-
od92366/2022_2023 : Providing / fixing 200mm high skirting in 19mm thk ply fixed on existing frame work.flushed with above,panelling,Skirting finish with 1.5mm thk Black Laminate as approve by Architect till satisfaction including,cutouts for power sockets.Work will be carried out as per drg and instruction of acoustic consultant,Site,Engineer / Architect.(Basic Rate of Laminate- = Rs - 650/sq.mt)
120
-
-
od92367/2022_2023 : Providing / Fixing 200mm x 150mm thk teak wood door frame with double rebate as per detail drawing,including MS hold fast in plumb line and one coat of Black japan paint and Anti termite treatment on frame,etc complete.Work will be carried out as per drg andinstruction of acoustic consultant / Site Engineer /,Architect.
0.8
-
-
od92368/2022_2023 : Providing and making of the 125mm thk Acoustical Door shutter in hard wood frame of 75x37.5mm all,around both side and intermediate frame of 50x37.5mm @ 600 mm c/c in both direction, keep 50mm thk,1000gsm density micron in between frame both side with 01 layer of 10kg/m2 Tec sound and 01 layer of,12.5mm thk plain gypsum board in between both hardwood frame work, Door Shutter shall be finished,with 1.5mm thk Laminate as per Architect, design drawing and pattern. All the edges of the shutter shall be,finished with T.W lapping putty as per detail
20
-
-
od92369/2022_2023 : Providing and fixing of the port hole window 1000mm x 800mm or as per designed in 19 mm fire proof ply,with necessary saalwood frame, Ply shall be finished with 1.5mm thk Black Laminate including 12mm thk,clear no reflective Modi flat glass with,U'rubber all around the glass complete in line and level etc,Work will,be carried out as per drg and instruction of acoustic consultant / Site Engineer / Architect.,NOTE :All the,wood shall be used will be coated with Fire painting and necessary Anti-termite treatment
2
-
-
od92370/2022_2023 : Labour charges for fixing surround speaker bracket on existing ply base in side wall and rear wall as per,detail including scaffolding, levelling etc complete.Work will be carried out as per drg and instruction of,acoustic consultant /Site Engineer /Architect.
28
-
-
od92371/2022_2023 : Providing and fixing of the 125mm wide x 12mm thk ply batten fixed on the edge of the cinema steps for,supporting the step light. Edge of the ply shall be well projected during the construction of the cinema,steps.work will be carried out as per drg andinstruction of acoustic consultant / Site Engineer / Architect.
112
-
-
LT PANELS,DG,UPS AND ACCESSORIES
-
-
-
od174421/2023_2024 : Supply, Installation, Testing and Commissioning of 20 kVA, Three phase input,<br>Three Phase output, true on-line UPS System with Isolation transformer and<br>15 minutes back up including all accessories, SMF batteries VRLA type with<br>powder coated CRCA cabinet including all accessories and cabling etc as<br>required complete having following specification. The UPS system consist of one numbers of UPS unit and one set of battery bank , Fully digital controlled based on DSP, Power factor corrected from end > 0.9 , Pure sine wave output. Full time output voltage & frequency regulation Auto regulation of battery end voltage Intelligent interface with LED/LCD display<br>Static bypass switch manual by pass switch Auto temperature compensation, Remote Management Interphase, UPS testing as per various load conditions (EB & DG) shall be done at site to establish the supplied item is complying the specifications.
2
-
-
od174422/2023_2024 : Supply, Installation, Testing and Commissioning of 5 kVA, Single phase input,<br>single Phase output, true on-line UPS System with Isolation transformer and 15 minutes back up ,including all accessories, SMF batteries VRLA type with powder coated CRCA cabinet including all Accessories and cabling etc as required complete having following specification . <br>The UPS system consist of one numbers of UPS unit and one set of battery bank , Fully digital controlled based on DSP, Power factor corrected from end > 0.9 , Pure sine wave output. Full time output voltage & frequency regulation, Auto regulation of battery end voltage Intelligent interface with LED/LCD display Static bypass switch / manual by pass switch Auto temperature compensation, Remote Management Interphase, UPS testing as per various load conditions (EB & DG) shall be done at site to establish the supplied item is complying the specifications
3
-
-
od174909/2023_2024 : Metering Panel Supply, Installation, Testing & Commissioning of LT Metering<br>Panel , TOD meter with CTs(0.5S) and PT(0.5), 320A Cutout fuse in seperate<br>compartment, cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, wall / floor mounting,dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size HFFR wires/cable, interconnection, duly powder coated with seven tank process etc.The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specification. The Panel shall be of Form 4A Construction, The panel shall be suitable for top entry cables, Incomer: 320A cut out fuse - 3nos, LT TOD Meter with CTs (0.5S),PT(0.5) ,320/5A Class 1 Resi cast CT for IPFC relay - 1 nos , 320A 36kA FP Microprocessor based Moulded Case Circuit Breaker - 2Nos, 400A FP ATS with AMF relay- 1no,SPD Type1+2- 1 Nos. Instruments: Multifunction Meter, control MCB, RYB Indication Lamps,CTs as per SLD- 2 set, ON/OFF/TRIP indication as per SLD- 3 set, Out going : 320A 36kA FP Microprocessor based Moulded Case Circuit Breaker - 1Nos.
1
-
-
od187433/2023_2024 : 200kVA DIESEL GENERATOR Supply, Installation, Testing and Commissioning of 200kVA prime rated D.G Set with acoustic enclosure and Control panel ,protection and digital metering, controls and interlocks, CTs and transducers for all all metering and protection and suitable FP MCCB etc. , including required Civil<br>foundation,antivibration mountings, exhaust silencer and exhaust pipe, suitable thermal insulation with mineral wool or equal insulation coverd with Aluminium cladding for silencer and exhaust pipe, conforming to latest environment protection regulations for emission(CPCB IV) and noise levels complete with ,water/coolant cooled (radiator type) four stroke, electric start conforming to BS:5514 200kVA prime rating, brushless, self excited, selfregulated and suitable for continuous operation at 1500rpm, generating415 V+/- 5% Volts at 0.8 p.f (lag),50Hz,3 phase, 4 wire system generally conforming to BS: 2613 & IS: 4722.Both Engine and Alternator shall be mounted on common channel iron base frame, and with standard accessories such as lead acid batteries and engine driven battery charger along with leads, battery stand, necessary control wiring with control cables, first fill of lubricating oil, and earthing as per standards Fuel tank for 8 hours suitable continuous operation, fuel piping from fuel tank to Engine, Residential silencer, suitable size Cable termination box with extended Alternator terminal with bus bars etc as required and as per specifications , rate for required civil foundation shall be included.The work should be as per Electrical Inspectorate/ Central Pollution control board standards applicable at the time of delivery.
1
-
-
od187466/2023_2024 : Theater SB: Supply, Installation, Testing & Commissioning of LT switch board cubicle <br>made out of 2mm thick CRCA sheet,totally enclosed, IP 42, wall / floor mounting,dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size HFFR wires/cable, interconnection, duly powder coated with seven tank process etc.The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and<br>accessories etc. complete as required as per drawing & specification. The Panel shall be of Form 4A Construction,The panel shall be suitable for top entry cables. Incomer: 320A 36kA FP Microprocessor based Moulded Case Circuit Breaker - 1Nos, SPD Type1+2- 1 Nos, Bus bar 320A TPN busbarchamber with Aluminium bus bar, Instruments: Multifunction Meter, control MCB Indication Lamps,CTs as per SLD- 1 set,ON/OFF/TRIP indication as per SLD- 7 set. Out goings: 160 A 25kA TP+NL Moulded Case Circuit Breaker with Thermal release and neutral link -1 nos, 100 A 25kA TP+NL Moulded Case Circuit Breaker with Thermal release and neutral link -1 nos, 63 A 25kA TP+NL Moulded Case Circuit Breaker with Thermal release and neutral link -3 nos
1
-
-
od196323/2023_2024 : HVAC PANEL: Supply, Installation, Testing & Commissioning of LT switch board cubicle made out of 2mm thick CRCA sheet,totally enclosed, IP 42, wall / floor mounting,dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size HFFR wires/cable, interconnection, duly powder coated with seven tank process etc.The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specification. The Panel shall be of Form 4A Construction, The panel shall be suitable for top entry cables.<br>Incomer : 160 A 25kA TP+NL Moulded Case Circuit Breaker with Thermal release and neutral link -1 nos , SPD Type1+2- 1 Nos, Bus bar: 160A TPN busbar chamber with Aluminium bus bar, Instruments:Multifunction Meter, control MCB Indication Lamps,CTs as per SLD- 1 set, ON/OFF/TRIP indication as per SLD- 9 set, Out goings:63 A 25kA TP+NL Moulded Case Circuit Breaker with Thermal release and neutral link -8 nos, 5 kVAr,480 V,50 Hz heavy duty capacitor(APP-H) -4 Nos, 5 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type) -4 Nos
1
-
-
CABLES AND CABLINGS
-
-
-
od173564/2023_2024 : Supply of following 3.5C 185 Sq.mm Al size 1.1 KV grade XLPE insulated, PVC sheathed, armoured aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date.
210
-
-
od173565/2023_2024 : Supply of 3.5C 95 Sq.mm size 1.1 KV grade XLPE insulated, PVC sheathed,<br>armoured aluminium conductor cable conforming to IS 7098 (Part 1)<br>amended upto date
35
-
-
od173566/2023_2024 : Supply of following 3.5C 50 Sq.mm Al size 1.1 KV grade XLPE insulated, PVC sheathed, armoured aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date
25
-
-
od173567/2023_2024 : Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date.4C 16 sqmm Al<br>
50
-
-
od173568/2023_2024 : Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date.4C 35 sqmm Al<br>
200
-
-
od173569/2023_2024 : Supply of following size 1.1 KV grade FRLS XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date.<br>2C 10 Sq.mm Al
75
-
-
od173593/2023_2024 : Supply of 3.5C 120 Sq.mm Al size 1.1 KV grade XLPE insulated, PVC sheathed,<br>armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended<br>upto date
145
-
-
9.1.2 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 10 sq. mm (19mm)
12
-
-
9.1.22 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm)
2
-
-
9.1.24 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 95 sq. mm (45mm)
2
-
-
9.1.25 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 120 sq. mm (45mm)
4
-
-
9.1.27 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)
8
-
-
9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)
6
-
-
9.1.35 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 35 sq. mm (32mm)
22
-
-
od173604/2023_2024 : Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured copper conductor cable conforming to IS 7098 (Part 1) amended upto date.<br>4C 4 Cu<br>
30
-
-
7.1.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 95 sq. mm and upto 185 sq. mm
60
-
-
7.2.3 : Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 95 sq. mm and upto 185 sq. mm
160
-
-
7.3.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.Upto 35 sq. mm
70
-
-
7.5.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 95 sq. mm and upto 185 sq. mm
40
-
-
7.7.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
75
-
-
7.7.2 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
10
-
-
7.7.3 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
15
-
-
7.8.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
735
-
-
7.8.2 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
40
-
-
7.8.3 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
90
-
-
4.6.1 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.100 mm width X 50 mm depth X 1.6 mm thickness
Details of cost for 30 metres
55
-
-
4.6.2 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.150 mm width X 50 mm depth X 1.6 mm thickness
65
-
-
4.6.4 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.300 mm width X 50 mm depth X 1.6 mm thickness
100
-
-
od173619/2023_2024 : Supply of following 2C 4 Sq.mm Cu size 1.1 KV grade XLPE insulated, PVC sheathed, armoured copper<br>conductor cable conforming to IS 7098 (Part 1) amended upto date
275
-
-
od174087/2023_2024 : Supplying and making end termination with brass compression gland and copper<br>lugs for following 2C 4 Sq.mm Cu size of PVC insulated and PVC sheathed /<br>XLPE copper conductor cable of 1.1 KV grade as required.
20
-
-
od174088/2023_2024 : Supplying and making end termination with brass compression gland and copper<br>lugs for following 4C 4 Sq.mm Cu size of PVC insulated and PVC sheathed /<br>XLPE copper conductor cable of 1.1 KV grade as required.
4
-
-
od174339/2023_2024 : Supply of following size 1.1 KV grade PVC insulated flexible copper FRLS<br>conductor cable conforming to IS 7098 (Part 1) amended upto date.1C<br>10sqmm CU
165
-
-
od174340/2023_2024 : Supply of following size 1.1 KV grade PVC insulated flexible copper FRLS<br>conductor cable conforming to IS 7098 (Part 1) amended upto date.1C<br>6sqmm CU
95
-
-
od174653/2023_2024 : Supplying and making end termination with copper lugs for 1C 10<br>sqmm size of PVC insulated flexible copper conductor cable of 1.1 KV grade<br>as required
32
-
-
od174654/2023_2024 : Supplying and making end termination with copper lugs for 1C 6<br>sqmm size of PVC insulated flexible copper conductor cable of 1.1 KV grade<br>as required
24
-
-
od174788/2023_2024 : Supply, fabricating and installing MS items such as Tees/ angles/ channels etc. on floor/ ceiling/ wall including necessary civil work such as grouting, finishing etc. and painting with two coats of primer and two coats of synthetic enamel paint as required<br>
500
-
-
7.10 : Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with
inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing
the same in ground as required.
2
-
-
od196131/2023_2024 : Supply of following 4C 1.5 Sq.mm size 1.1 KV grade XLPE insulated, PVC<br>sheathed, armoured copper<br>conductor cable conforming to IS 7098 (Part 1)<br>amended upto date.<br>
40
-
-
WIRING AND ACCESSORIES
-
-
-
1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C
50
-
-
1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire
1750
-
-
1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
1250
-
-
1.14.3 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire
750
-
-
1.14.4 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 6 Sq.mm + 1 x 6 sq.mm earth wire
50
-
-
1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm
150
-
-
1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
100
-
-
1.21.3 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm
50
-
-
1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch
2
-
-
1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch
26
-
-
1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet
2
-
-
1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet
26
-
-
1.24.8 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Bell push
2
-
-
1.26 : Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
20
-
-
1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)
65
-
-
1.31 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in
recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps
modular switch, connection etc. as required. (For light plugs to be used in non residential
buildings).
18
-
-
1.38 : Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.
2
-
-
1.55.3 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C
120
-
-
od173132/2023_2024 : Supply, fixing of Network point, UTP RJ45, CAT 6 modular type socket with modular plate & cover on surface or in recess, including proving and fixing suitable size GI box, inter connection etc as required complete. <br>
5
-
-
od173133/2023_2024 : Supply & fixing Computer points with 3 nos 3 pin 5/6A socket with 2no.5/6A switch with modular front plate and cover on surface/recess, including proving and fixing suitable size GI boxs, its interconnections etc as required complete. (Note: 2 nos 5/6A socket fixed at 60cm above FFL and 2 nos 6A switch with 1no 5/6A socket at 1m above FFL)<br>
5
-
-
od173325/2023_2024 : Supplying and fixing suitable size GI box with modular plate and cover in front onsurface or in recess, including providing and fixing 6 pin 5/6 and15/16 ampsmodular socket outlet and 15/16 amps modular switch, connection etc. asrequired.
16
-
-
1.24.6 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet
5
-
-
MSBs AND DISTRIBUTION BOARDS
-
-
-
2.3.3 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door
1
-
-
2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
72
-
-
2.10.3 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole
3
-
-
2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole
2
-
-
2.11 : Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
51
-
-
2.15.1 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps
2
-
-
2.15.2 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
1
-
-
90.11.1.10 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - three phase double cover (IP 42/43)
4
-
-
90.11.1.11 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+18) - three phase double cover (IP 42/43)
1
-
-
90.11.1.16 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required8 way (8+24) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)
1
-
-
90.11.1.19 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8 + 18) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43)
1
-
-
od173480/2023_2024 : Supply and fixing of 40-63A FP MCB, C-Curve following rating, 10 KA, Miniature<br>Circuit Breakers as required
6
-
-
od173481/2023_2024 : Supply, Installation, Testing & Commissioning of 63A FP isolator in 1.6mm thick<br>sheet steel enclosure duly painted with powder coated finishing on surface<br>including all the mounting accessories, internal wiring etc as required complete
8
-
-
od173484/2023_2024 : Supply and fixing of following rating, 10 KA, Miniature Circuit Breakers<br>as<br>required.<br>6-32A FP MCB, C-CURVE
2
-
-
od173485/2023_2024 : Supply and fixing of 40-63A TP MCB, C-Curve following rating, 10 KA, Miniature Circuit Breakers<br>as required.<br>
5
-
-
od173489/2023_2024 : Supply, Installation, Testing & Commissioning of 25/32A DP MCB isolator in<br>1.6mm<br>thick sheet steel enclosure duly painted with powder coated finishing<br>on surface<br>including all the mounting accessories, internal wiring etc as<br>required complete<br>with all accessories
6
-
-
2.3.2 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door
2
-
-
od173693/2023_2024 : Providing and fixing following rating and breaking capacity MCCB with<br>thermal magnetic release in existing DB including all accessories as required.<br>100A, 25kA FP MCCB
1
-
-
od173694/2023_2024 : Supply, Installation, Testing & Commissioning of 20 A DP MCB Isolator in weather proof enclosure on surface including all the mounting accessories, internal wiring etc. as required
2
-
-
od173695/2023_2024 : Supply, Installation, Testing & Commissioning of 25 A DP MCB Isolator in weather proof enclosure on surface including all the mounting accessories, internal wiring etc. as required
12
-
-
od173696/2023_2024 : Supply, Installation, Testing & Commissioning of 63A FP Isolator and100mA FP RCCB in weather proof enclosure on surface including all the mounting accessories, internal wiring etc as required
4
-
-
2.14.1 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps
3
-
-
od173703/2023_2024 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, <br>residual current circuit breaker (RCCB), having a sensitivity current 100 mA in the <br>existing MCB DB complete with connections, testing and commissioning etc. as <br>required. 63A FP 100 mA RCCB
2
-
-
od173704/2023_2024 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, <br>residual current circuit breaker (RCCB), having a sensitivity current 100 mA in the <br>existing MCB DB complete with connections, testing and commissioning etc. as <br>required. 40A, FP 100mA RCCB
2
-
-
90.11.1.14 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)
2
-
-
90.14.29.3 : S & F Motor starters accessories of the followingPush button station for starters
4
-
-
LIGHT FIXTURES AND FANS
-
-
-
od173491/2023_2024 : Supply of 20W Surface/Suspended Mounted LED Batten of maximum wattage below 20W with System efficacy of more than 120 lm/W and lumen output of luminaire greater than 2000 lumen. LED luminaire shall have sleek design with Extruded Aluminum Section. The luminaire shall have Optically Efficient<br>Polycarbonate Diffuser for Uniform illumination and wider light distribution. The LED shall be compliant with LM80 standard with Useful L70 life of 50000 Hrs tested at maximum current. The CRI of Minimum 80 and 4 KV internal surge protection. Power factor greater than 0.95 ,CCT 5700K+-/300K,ripple factor<5 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire and EMI/EMC compatible
6
-
-
od173492/2023_2024 : Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required
3
-
-
od173493/2023_2024 : Supply of IP 65 & IK 08 LED surface mounted Bulkhead fixture with System<br>efficacy of more than 110 lm/W. Luminaire shall be made up of Die Cast<br>Aluminium for efficient heat dissipation. Luminaire shall have Polycarbonate<br>diffuser for Uniform illumination and wider light distribution. The LEDs used should<br>be with CCT of 5700 K and CRI > 70, Power factor greater than 0.95 and total<br>harmonic distortion (THD) of less than 10% including all accessories necessary as required to complete installation
4
-
-
od173541/2023_2024 : Supply of LED recess mounted down light made of die cast aluminium, along with driver,surge protection,<br>maximum system wattage of 9Watts, CCT- 3000K with lumen output of lamp greater than 990 lumens,<br>power factor > 0.95, rated life of L70 @ 50,000 hours, system efficacy greater than 110 lumen/watt and<br>including all necessary accessories as required complete
153
-
-
od173547/2023_2024 : Installation, testing and commissioning of LED down lighter fittings on false ceiling<br>with all mounting accessories as required complete including interconnections<br>using 3 runs of 1.5 sqmm FRLS PVC insulated stranded copper conductor as required
153
-
-
15.1 : Supplying,Installation, testing and commissioning of Passive Infrared (PIR) technology based occupancy sensor having high preformance, non regulating programmable type, suitable for connected load upto 10 Amp, for mounting height up to 2.8 Mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming and site etc. complete as required
5
-
-
1.49 : Numbering of ceiling fan / exhaust fan/ fluorescent fittings as required.
209
-
-
od174696/2023_2024 : Supply, installation, testing and commissioning of 24V, +/-10W/mtr 120LED/mtr<br>200mA 5 mtr LED strip light suitable for cove lighting with color temperature of 22K to 6K ,IP 20 and CRI 80-90, rated life of L70 @ 35,000 hours with channel casing and acrylic cover complete with all necessary accessories as Driver and all mounting arrangements like profile with PMMA Diffuser to terminate to a point wiring out. <br>5 meter LED strip with suitable driver
64
-
-
od174823/2023_2024 : Installation, testing and commissioning of pre-wired, LED fitting / compact LEDt fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
10
-
-
EARTHING AND SAFETY EQUIPMENTS
-
-
-
2.21 : Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2
mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
1
-
-
90.16.1.3 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)
120
-
-
5.9 : Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth
electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
30
-
-
5.15 : Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
216
-
-
od173540/2023_2024 : Supply and fixing of of fire retardant/extinguishing electrical insulated syntheticmat of size 2m x 1m for 3.3kV grade 2mm thick, +/- 10% confirming to BIS: DOCNo. ET-02 (5440) meeting requirements of IS:15652:2006 (with upto dateamendment), suitable for 3.3kV voltage and having minimum width of 1000mm +/-20mm and including supply of required quantity of adhensive / compound
3
-
-
od174389/2023_2024 : <br>Earthing with CI earth plate 1200 mm X 1200 mm X 12.5 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe<br>of 2.7 metre long etc. with charcoal/ coke and salt as required.<br>
6
-
-
od174658/2023_2024 : Earthing with C.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and<br>providing masonry enclosure with cover plate having locking arrangement and<br>watering pipe etc.as per IS3043
5
-
-
90.16.1.4 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG)
150
-
-
od174863/2023_2024 : Supplying and laying 32mmx6mm GI strip at 0.50 metre below ground as strip<br>earth<br>electrode, including connection/ terminating with G.I. nut, bolt, spring,<br>washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
200
-
-
od174882/2023_2024 : Providing and fixing GI/Cu strip/wire on surface or in recess for connections etc. as required.32mm X 6mm GI
20
-
-
od175897/2023_2024 : Supplying and laying 25 mm X 3 mm copper strip at 0.50 meter below ground as<br>strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required.
40
-
-
LIGHT MANGEMENT SYSTEM
-
-
-
od175150/2023_2024 : Supply installation, testing and commissioning of of LED recess mounted (Double height area) down light made of die cast aluminium, maximum system wattage of 20 Watts, along with DALI dimmable driver ,lumen output of lamp greater than or equal to 2000 lumens, power factor > 0.95, rated life of L70 @ 50,000 hours, CCT - 3000K system efficacy greater than 100 lumen/watt and including all necessary accessories including control wiring as required complete.
40
-
-
od175243/2023_2024 : Supply, erection, testing and commissioning of suitable nos of DALI dimming module supporting minimum of 40 nos. DALI devices. Voltage Range shall be 12-20V DC DALI/160Ma Output ith Dimming range 0-100% , DALI broadcast. The Scope of Work also includes necessary control wiring of the DALI Controller with<br>DALI Devices including all required materials (2R 1.5 sqmm FRLSH wire, PVC conduits and accessories etc). Supply and installation of suitable nos. of Dali controller module for supporting minimum 40 nos of Dali devise .Supply and installation of Wall Switch/Remote (Wireless battery powered Bluetooth Enabled or CAT 6 controlled) control with 5 Button Controls and ON/OFF, intensity, and CCT of an individual or a group of luminaires,maximum longevity and easy installation with a wall bracket and a magnet attached back of the remote. Mobile App shall be provide along with Controller to configure the devices The app can Should be capable to configure and control individual/group devices, invoke scenes, and schedule device operations.
1
-
-
CCTV
-
-
-
od157969/2021_2022 : Supply, Installation, Testing and Commissioning of 4MP Indoor Dome PoE camera with 1/2.9 inch CMOS sensor, Varifocal lens - 3 to 10mm, IR range - 15m, H.265, ONVIF Profile S, Certifications - CE / EN / UL and FCC along with all accessories as required at site as per technical specification.
17
-
-
od157971/2021_2022 : Supply, Installation, Testing and Commissioning of CCTV central control equipment with capacity of 32 cameras, RAID5 with 30 days of archiving (Contractor to provide storage and calculations to justify the record duration) - with required HDDs and all required hardware, including necessary cabling with all accessories required at site complete as per technical specification. The video recording will be at 15fps in minimum HD resolution.
1
-
-
od157975/2021_2022 : Supply, Installation, testing and commissioning of 42" commercial display, 24/7, full HD, with HDMI and USB ports with all accessories required at site complete as per specification.
1
-
-
Access Control System
-
-
-
od157968/2021_2022 : Supply, installation, testing and commissioning of Biometric card reader along with all necessary accessories and cabling as required at site complete as per technical specification.
2
-
-
od157972/2021_2022 : Supply, installation, testing and commissioning of Single door EM lock along with all necessary accessories and cabling as required at site complete as per technical specification.
2
-
-
od157976/2021_2022 : Supply, installation, testing and commissioning of Exit push button along with all necessary accessories and cabling as required at site complete as per specification.
2
-
-
od157978/2021_2022 : Supply, installation, testing and commissioning of Emergency door release along with all necessary accessories and cabling as required at site complete as per specification.
2
-
-
EPABX
-
-
-
od157967/2021_2022 : Supply, Installation, Testing and Commissioning of IP based EPABX with 1 PRI line and 8 analogue extensions along with operator console, 20 pair MDF with krone modules, and all required accessories and cabling, as required at site complete as per technical specification.
1
-
-
od157973/2021_2022 : Supply, Installation, Testing and Commissioning of Analog telephone including all accessories as required at site as per technical specification.
7
-
-
Structured cabling
-
-
-
od157966/2021_2022 : Supply, Installation, Testing and Commissioning of U/UTP cable - Category 6A, 4 pair, 23 AWG solid copper conductor, 500 MHz, with Fluke Cable Analyser through existing conduits including termination, numbering tags, Cable ties, ferrules and all accessories required at site as per technical specification.
1280
-
-
od157974/2021_2022 : Supply, Fixing, Testing and commissioning of size - 25mm of medium class PVC conduit along with accessories in surface/recess including cutting the wall / floor as required at site and making good the same in case of recessed conduit as required.
600
-
-
od157977/2021_2022 : Supply, installation, testing and commissioning of 27U Network Rack along with all necessary hardware and accessories, etc. required at site complete as per technical specification.
1
-
-
od157979/2021_2022 : Supply ,Installation, testing and commissioning of UTP Patch Cords, Category 6A - 2M along with all accessories required as per technical specification
34
-
-
od157980/2021_2022 : Supply, Installation, Testing and Commissioning of Metal backbox along with all accessories required at site complete as per technical specification.
13
-
-
od157981/2021_2022 : Supply, Installation, Testing and Commissioning of Single Shuttered Face Plate along with all accessories required at site complete as per technical specification.
7
-
-
od157982/2021_2022 : Supply, Installation, Testing and Commissioning of Dual Shuttered Face Plate along with all accessories required at site complete as per technical specification.
4
-
-
od157983/2021_2022 : Supply, Installation, Testing and Commissioning of CAT6A information Outlet, RJ 45 with all accessories required at site including termination complete as per technical specification
15
-
-
od157984/2021_2022 : Supply, Installation, Testing and Commissioning of 50 port fully loaded voice panels with all accessories required at site complete as per technical specification.
1
-
-
od157985/2021_2022 : Supply, Installation, Testing and Commissioning of CAT6A 24 port patch panel with shutter fully loaded, with all accessories required at site complete as per technical specification.
2
-
-
Active Components
-
-
-
od157965/2021_2022 : Supply, Installation, testing and commissioning of 24 port switch 10/100/1000Base-TX ports with 2 x 1G SFP ports with all accessories required at site complete as per technical specification.
1
-
-
od157970/2021_2022 : Supply, Installation, testing and commissioning of 24 port PoE+ switch 10/100/1000Base-TX ports with 2 x 1G SFP ports with all accessories required at site complete as per technical specification.
1
-
-
HVAC SYSTEM
-
-
-
od370677/2022_2023 : Supply, installation, testing and commissioning (SITC) of 8.5 TR minimum capacity inverter type air-cooled DX Ductable unit ( Air Handling Unit & Out door Unit) with all standard fittings, outlet volume control dampers, canvas connections,UV Emitters with reflectors to be fixed on the coil surface with removable extruded aluminium frames. , filter section shall be MERV 8 filters complying to ASHRAE 52.2 , IDU SS drain pan, as per specifications complete with suitable capacity drive motor(, air cooled condenser with all accessories, hermetically sealed scroll/rotary compressor, thermostat with digital display,sensory devices, first charge refrigerant gas R32/R404a/R407c, suitable sized copper refrigerant piping(both suction and liquid piping) as per relevant ASHRAE standards upto 5 mtr including 19mm thick closed cell class 'O' insulation of suitable thick round closed cell elastomeric insulation with minimum R value of 0.7 for pipe size greater than 40mm and 0.4 for less than 40 mm finished with 7mils factory laminated glass cloth suitably supported on trays/ split clamps etc. ,suitable dia PVC condensate drain pipe of 6kg/sq.cm upto 5m connecting the drain pan of the indoor units to nearest drain point with necessary U-trap, insulated with 9 mm thick closed cell elastomeric insulation finished with 7mils factory laminated glass cloth as per specification along with required pipe fittings and accessories like Bends, Tees, reducers, clamps, suitably supported. Equipment shall have vibration isolator pads, structural supports for fixing IDU/ ODU as per drawings/standards, safety devices including thermal protector, pressure relief valve, over load relays, single phase preventer, high-low pressure cut off etc.,all associated electrical works including starter, starter panel & power wiring(max 3m from isolator) and control cabling(indoor to outdoor),thermostat wiring etc. suitable for three phase 440V etc. Equipment shall have minimum energy efficiency as per ECBC plus requirements.. complete in all respects as per technical specifications.
4
-
-
od370686/2022_2023 : Supply, installation, testing and commissioning of suitable sized copper refrigerant piping(both suction and liquid piping) beyond 5 mtr including 19mm thick closed cell elastomeric Class 0 insulation of suitable thick round closed cell elastomeric insulation with minimum R value of 0.7 for pipe size greater than 40mm and 0.4 for less than 40 mm,finished with 7mils factory laminated glass cloth for 8.5 TR machine between indoor & outdoor units complete in all respects as per technical specifications.
17
-
-
od370716/2022_2023 : Supply, installation, testing and commissioning of 2TR minimum capacity inverter type DX type 4-way Cassette units with evaporator fan motor, cooling coil and insulated drain pan with factory installed high lift condensate drain pump enclosed in plastic casing complete with cordless remote control and outdoor unit complete with hermetically sealed scroll/rotary compressor, condenser fan and coil enclosed in sheet metal cabinet powder coated, first charge refrigerant gas R32/R410A/R407C, vibration isolator pads, structural supports for fixing IDU/ ODU, with suitable stabilizer suitable as required as per manufacturers recommendation ,suitably sized copper refrigerant piping as per relevant ASHRAE Standards (both suction and liquid piping) including 19 mm thick closed cell nitrile rubber insulationwith minimum R value of 0.7 for pipe size greater than 40mm and 0.4 for less than 40 mm as per specification interconnecting indoor & outdoor units with required pipe fittings and accessories like bends, tees, reducers, supports finished with 7 mils factory laminated treated fibre glass cloth, necessary power/control cabling, suitably supported on trays/ split clamps etc., PVC condensate drain pipe (upto 5 m) 6kg/sq.cm of suitable dia connecting the drain pan of the indoor units to nearest drain point with U-trap, insulated with 9 mm thick closed cell nitrile rubber insulation, required pipe fittings and accessories like bends, tees, reducers, supports, clamps, finished with 7 mils factory laminated treated fibre glass cloth. Units shall be suitable for operation at 230 Volts 50 Hz /Three phase supply. The Equipment shall be complete in all respects as per Technical specification
8
-
-
od371615/2022_2023 : Supply, installation testing and commissioning of 2 TR minimum capacity inverter type Hi wall Split air conditioning unit (Indoor and Outdoor Unit) complete with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/rotary compressor, outdoor unit and hi wall units for single phase 230 V supply minimum 5 star rated as per BEE and with suitable stabilizer with necessary supports vibration isolators suitable as required as per manufacturers recommendation, suitably sized copper refrigerant piping as per relevant ASHRAE Standards (both suction and liquid piping) including 19 mm thick closed cell nitrile rubber insulationwith minimum R value of 0.7 for pipe size greater than 40mm and 0.4 for less than 40 mm as per specification interconnecting indoor & outdoor units with required pipe fittings and accessories like bends, tees, reducers, supports finished with 7 mils factory laminated treated fibre glass cloth, necessary power/control cabling, suitably supported on trays/ split clamps etc., PVC condensate drain pipe (upto 5 m) 6kg/sq.cm of suitable dia connecting the drain pan of the indoor units to nearest drain point with U-trap, insulated with 9 mm thick closed cell nitrile rubber insulation, required pipe fittings and accessories like bends, tees, reducers, supports, clamps, finished with 7 mils factory laminated treated fibre glass cloth, first charge refrigerant gas R32/R410A/R407C, cordless remote etc complete in all respects as per technical specification
4
-
-
od371616/2022_2023 : Supply, installation testing and commissioning of minimum 1 TR capacity inverter type Hi wall Split air conditioning unit (Indoor and Outdoor Unit) complete with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/rotary compressor, outdoor unit and hi wall units for single phase 230 V supply minimum 5 star rated as per BEE and with suitable stabilizer with necessary supports vibration isolators suitable as required as per manufacturers recommendation, suitably sized copper refrigerant piping as per relevant ASHRAE Standards (both suction and liquid piping) including 19 mm thick closed cell nitrile rubber insulationwith minimum R value of 0.7 for pipe size greater than 40mm and 0.4 for less than 40 mm as per specification interconnecting indoor & outdoor units with required pipe fittings and accessories like bends, tees, reducers, supports finished with 7 mils factory laminated treated fibre glass cloth, necessary power/control cabling, suitably supported on trays/ split clamps etc., PVC condensate drain pipe (upto 5 m) 6kg/sq.cm of suitable dia connecting the drain pan of the indoor units to nearest drain point with U-trap, insulated with 9 mm thick closed cell nitrile rubber insulation, required pipe fittings and accessories like bends, tees, reducers, supports, clamps, finished with 7 mils factory laminated treated fibre glass cloth, first charge refrigerant gas R32/R410A/R407C, cordless remote etc complete as required as per technical specification/ISHRAE standards.
2
-
-
od372366/2022_2023 : Supply, installation, testing and commissioning of suitable sized copper refrigerant piping(both suction and liquid piping) beyond 5 mtr including 19mm thick closed cell elastomeric Class 0 insulation of suitable thick round closed cell elastomeric insulation with minimum R value of 0.7 for pipe size greater than 40mm and 0.4 for less than 40 mm,finished with 7mils factory laminated glass cloth for 2 TR machine between indoor & outdoor units complete in all respects as per technical specifications.
43
-
-
od370869/2022_2023 : Supply, installation, testing and commissioning of suitable sized copper refrigerant piping(both suction and liquid piping) beyond 5 mtr including 19mm thick closed cell elastomeric Class 0 insulation of suitable thick round closed cell elastomeric insulation with minimum R value of 0.7 for pipe size greater than 40mm and 0.4 for less than 40 mm,finished with 7mils factory laminated glass cloth for 1.0 TR machine between indoor & outdoor units complete in all respects as per technical specifications.
12
-
-
od372597/2022_2023 : Supply, installation, testing and commissioning of suitable dia PVC condensate drain pipe of 6kg/sq.cm upto 5m connecting the drain pan of the indoor units to nearest drain point with necessary U-trap, insulated with 9 mm thick closed cell elastomeric insulation finished with 7mils factory laminated glass cloth along with required pipe fittings and accessories like Bends, Tees, reducers, clamps, suitably supported etc. complete in all respects as per the technical specifications.
50
-
-
od372598/2022_2023 : Supply, Installation testing and commissioning of Inline Circular/Cabinet fans of following minimum capacity with suitable blower, Single/3 phase phase(IE3) direct driven/Belt driven motor of following capacity for exhaust, with applicable Starter /Starter panel , structural supports , vibration isolator if required ,other accessories etc. complete in all respects as per technical specifications.<br>400 CFM -10mm of WG ESP
3
-
-
od372599/2022_2023 : Supply, Installation testing and commissioning of Inline Circular/Cabinet fans of following minimum capacity with suitable blower, Single/3 phase phase(IE3) direct driven/Belt driven motor of following capacity for exhaust, with applicable Starter /Starter panel , structural supports , vibration isolator if required ,other accessories etc. complete in all respects as per technical specifications.:<br>100 CFM -10mm of WG ESP
2
-
-
AIR DISTRIBUTION
-
-
-
16.12.1.1 : Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Factory fabricated GSS sheet metal rectangular ducting as per IS 655-2006
462
-
-
16.12.1.2 : Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Factory fabricated GSS sheet metal rectangular ducting as per IS 655-2006
229
-
-
16.12.1.3 : Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Factory fabricated GSS sheet metal rectangular dueling as per IS 655-2006
10
-
-
16.23.1 : INSULATION ON EXISTING PIPE br 16.4 Supplying, laying/ fixing, testing and commissioning of following thickness resin bonded fiber glass pipe section insulation having density 80 kg/cum or mineral wool (non combustible) having density of 144 Kg/ cu m duly covered with a layer of 120 gm/sqm polythene sheet (vapour barrier) on existing pipe and finally applying 0.63mm aluminium sheet cladding complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as amended up to date ) at joints etc. as per specifications and as required.Nitrile rubber insulation - 25 mm
660
-
-
16.21.1 : Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m3, with 25 mm X 25 mm Gl section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as per specifications. 16 br brAcoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m3Acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m3
127
-
-
od372731/2022_2023 : Supply & fixing of Acoustic Insulation of AHU Rooms using open cell processed nitrile rubber having a density of 140-180 Kg/m3 and thickness of 25 mm with anti-microbial protection with suitable frame works etc. complete in all respects as per the technical specifications
136
-
-
16.15 : Suppluying and Fixing of powder costed extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.
12
-
-
od372742/2022_2023 : DSR 16.16. Supplying and Fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.
9
-
-
16.17 : Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminum with aluminum volume control dampers with anti smudge ring and removable core.
1
-
-
16.18 : Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminum without volume control dampers with anti smudge ring and removable core.
1
-
-
od372870/2022_2023 : Supply, Installation , testing and commissioning of Aluminium Extruded Fresh air louvers with fresh air damper, bird screen etc complete in all respects as per the technical specifications.
2
-
-
od372912/2022_2023 : Supply, Installation , testing and commissioning of Aluminium extruded exhaust air louvers with damper,bird screen etc.complete in all respects as per technical specifications.
1
-
-
16.13 : Supply, Insulation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications. GI volume control duct damper
6
-
-
od372958/2022_2023 : Supply, Installation, testing & commissioning of Fusible link type Fire damper of 16 gauge GI sheets with fire rating of 300 Deg C for 2 hr for Air Distribution Networks complete in all respects as per the technical specifications.
4
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements