Kerala State Film Development Corporation Limited Tender

od92807/2024_2025 : MODULAR TILE CEILING IN EXIT PASSAGE<br>Providing & fixing of the acoustical mineral fiber ceiling tile of 0.75NRC value on the 'T'<br> 'T' Grid system from the Armstrong, AMF, Ecophon or any euivalent approved in the <br>exit passege, including cutting of spot light , Sprinkler & any other related services cut out<br>providing necessary 6mm thk ply support & redoing the same in good finish complete.<br>Work will be carried out as per drg & instruction of acoustic consultant /site Engineer /<br>Architect.

od92811/2024_2025 : PLAIN GYPSUM BOAD FALSE CEILING.<br>Providing & fixing false ceiling in 01 layer of 12.5mm thk Indian Gypsum Plain board <br>with 50mm thk 1000gsm density micron in between G.I frame work <br>FRAME - G.I.frame fabricated with 45 x 15 x 0.9 mm thk Intermediate 'C' channel<br> @ 1220mm c/c in one Direction & Ceiling sections 80 x 26 x 0.5 @ 450mm c/c in <br>other direction including perimeter channel as required & 25x10x0.5mm ceiling angle <br>securely fixed to structural truss/members above @ 1220mm c/c, last ceiling angle not <br>more than 610 mm from adjacent wall, connecting clips etc as required with 50mm thk <br>1000 gsm density micron in Black RP Tissue bag, including scaffolding, cutting of spot <br>light, AC diffuser, return air grill, Sprinkler & any other services cutout & providing <br>necessary 6mm thk ply support & redoing the same in good finish etc complete.Work <br>will be carried out as per drg & instruction of Acoustic consultant / Site Engineer /Architect<br>JOINTS - All joints of panels filled and finished with India Gypsum jointing compound<br>jointing tapes etc. complete as per manufacturer specification for joint<br>TOP COAT – Entire face of ceiling finished with two coats of top coat as per <br>manufacturers specifications. Three coats of matt paint colour as approved by Architect<br>till the satisfaction of site Engineer

wall lining treatment

od92796/2024_2025 : ACOUSTICAL LINING OF BACK WALL OF SCREEN IN SOUND BOX<br>(AS MARKED IN THE DRAWING - WF-01)<br>Providing & fixing of 50mm thk 1000gsm density micron in between G.I frame work<br>finish with Black Crape fabric as approved<br>FRAME - G.I. frame fabricated with 50 x 34 x 36x0.55 mm thick G.I 'C' section @ 1220mm c/c in<br>horizontal direction fixed to or away from wall surface on necessary 50 x 50mm wooden <br>T' dutta support with 50mm Air gap, above 'C' section have Ceiling sections of 80 x <br>26 x 0.5 @ 400mm c/c in vertical direction with 50mm thk 1000gsm density micron in <br>between 'C' section frame fixed with chicken mesh backing of G.I 12x12mm square of 24<br>guage (as per approved sample), including scaffolding, machine screw, etc complete. Work<br>will be carried out as per drg & instruction of Acoustic consultant/ Site Engineer /Architect.<br>FINISH: Entire frame /Micron shall be finish with (FR) Black Crape fabric as approved<br>NOTE :All the wood shall be used will be coated with Fire painting & necessary Anti- <br>termite treatment & All the frame work to be considered of Gypsum India company <br>& All the<br>Wooden dutta will have 100x100x12mm thk (Insu Sound-Bcap rubber of <br>Supreme ) behind between wall and wooden dutta

od92800/2024_2025 : ACOUSTICAL PANELING BEHIND OF SCREEN IN 'L' SHAPE AT <br>CORNER JUNCTION OF WALL (BOTH SIDE)<br>(AS MARKED IN THE DRAWING - WF-02)<br>Providing & fixing 01 layer of 595 x 595 x 12.5mm thk perfoated gypsum tile with 50mm<br>thk 1000gsm density micron in between G.I frame work finish with Black water base paint<br>as marked in drawing (1200 x 1200mm in 'L' shape)<br>FRAME - G.I.frame fabricated with 50 x 34x36 x 0.55mm G.I 'C' section @ 1220mm c/c in<br>horizontal direction fixed to or away from wall surface on necessary 50 x 50mm wooden <br>T' dutta support with 50mm Air gap, above 'C' section have Ceiling sections of 80 x <br>26 x 0.5 @ 400mm c/c in vertical direction with 50mm thk 1000gsm density micron in <br>between 'C' section frame fixed with chicken mesh backing of G.I 12x12mm square of 24<br>guage (as per approved sample), including scaffolding, machine screw, etc complete. Work<br>will be carried out as per drg & instruction of Acoustic consultant/ Site Engineer /Architect.<br>FINISH: Perfoated gypsum tile shall be finish with Black Water base paint as approved <br>NOTE :All the wood shall be used will be coated with Fire painting & necessary Anti-<br>termite treatment & All the frame work to be considered of Gypsum India company <br>& All the Wooden dutta will have 100x100x12mm thk (Insu Sound-Bcap rubber of <br>Supreme ) behind between wall and wooden dutta

od92808/2024_2025 : SIDE WALL 'E' BOARD PANELING UP TO 2100MM AVG HEIGHT<br>(AS MARKED IN THE DRAWING - WF-03)<br>Providing & fixing 1 layer of 08mm thk site Perforated (08mm Random holes) 'E' board <br>with 50mm thk 1000gsm density micron in between G.I frame work as per drawing.<br>FRAME - G.I. frame fabricated with 50 x 34x 36x0.55mm G.I 'C' section @ 1220mm c/c in<br>horizontal direction fixed to or away from wall surface on necessary 50 x 50mm wooden <br>T' dutta support with 50mm Air gap, above 'C' section have Ceiling sections of 80 x <br>26 x 0.5 @ 400mm c/c in vertical direction with 50mm thk 1000gsm density micron in <br>between 'C' section frame fixed with chicken mesh backing of G.I 12x12mm square of 24<br>guage (as per approved sample), including scaffolding, machine screw, etc complete. Work<br>will be carried out as per drg & instruction of Acoustic consultant/ Site Engineer /Architect.<br>NOTE :All the wood shall be used will be coated with Fire painting & necessary Anti-<br>termite treatment & All the frame work to be considered of Gypsum India company <br>& All the Wooden dutta will have 100x100x12mm thk (Insu Sound-Bcap rubber of <br>Supreme ) behind between wall and wooden dutta

od92812/2024_2025 : SIDE WALL PERFORATED GYPSUM TILE PANELLING ABOVE <br>2100MM AVG HEIGHT (AS MARKED IN THE DRAWING - WF-04)<br>Providing & fixing 1 layer of 12.5mm thk Perforated gypsum tile with 50mm thk 1000gsm<br>density micron in between G.I frame work as per drawing.<br>FRAME - G.I. frame fabricated with 50 x 34x36x0.55mm G.I 'C' section @ 1220mm c/c in<br>horizontal direction fixed to or away from wall surface on necessary 50 x 50mm wooden <br>T' dutta support with 50mm Air gap, above 'C' section have Ceiling sections of 80 x <br>26 x 0.5 @ 400mm c/c in vertical direction with 50mm thk 1000gsm density micron in <br>between 'C' section frame fixed with chicken mesh backing of G.I 12x12mm square of 24<br>guage (as per approved sample), including scaffolding, machine screw, etc complete. Work<br>will be carried out as per drg & instruction of Acoustic consultant/ Site Engineer /Architect.<br>NOTE :All the wood shall be used will be coated with Fire painting & necessary Anti-<br>termite treatment & All the frame work to be considered of Gypsum India company <br>& All the Wooden dutta will have 100x100x12mm thk (Insu Sound-Bcap rubber of <br>Supreme ) behind between wall and wooden dutta

od92814/2024_2025 : REAR WALL 'E' BOARD PANELING UP TO 1200MM HEIGHT<br>(AS MARKED IN THE DRAWING - WF-03)<br>Providing & fixing 1 layer of 08mm thk site Perforated (08mm Random holes) 'E' board <br>with 50mm thk 1000gsm density micron in between G.I frame work as per drawing.<br>FRAME - G.I. frame fabricated with 50 x 34x36x0.55mm G.I 'C' section @ 1220mm c/c in<br>horizontal direction fixed to or away from wall surface on necessary 50 x 50mm wooden <br>T' dutta support with 50mm Air gap, above 'C' section have Ceiling sections of 80 x <br>26 x 0.5 @ 400mm c/c in vertical direction with 50mm thk 1000gsm density micron in <br>between 'C' section frame fixed with chicken mesh backing of G.I 12x12mm square of 24<br>guage (as per approved sample), including scaffolding, machine screw, etc complete. Work<br>will be carried out as per drg & instruction of Acoustic consultant/ Site Engineer /Architect.<br>NOTE :All the wood shall be used will be coated with Fire painting & necessary Anti-<br>termite treatment & All the frame work to be considered of Gypsum India company <br>& All the Wooden dutta will have 100x100x12mm thk (Insu Sound-Bcap rubber of <br>Supreme ) behind between wall and wooden dutta

od92818/2024_2025 : REAR WALL G.I. FRAME PANELLING ABOVE 1200MM HEIGHT<br>G.I. FRAME PANELLING ABOVE MASKING IN SLOPE<br>(AS MARKED IN THE DRAWING - WF-05)<br>Providing & fixing G.I frame work paneling with 50mm thk 1000gsm density micron in<br>between G.I frame work as per drawing.<br>FRAME - G.I. frame fabricated with 50 x 34x36x0.55mm G.I 'C' section @ 1220mm c/c in<br>horizontal direction fixed to or away from wall surface on necessary 50 x 50mm wooden <br>T' dutta support with 50mm Air gap, above 'C' section have Ceiling sections of 80 x <br>26 x 0.5 @ 400mm c/c in vertical direction with 50mm thk 1000gsm density micron in <br>between 'C' section frame fixed with chicken mesh backing of G.I 12x12mm square of 24<br>guage (as per approved sample), including scaffolding, machine screw, etc complete. Work<br>will be carried out as per drg & instruction of Acoustic consultant/ Site Engineer /Architect.<br>NOTE :All the wood shall be used will be coated with Fire painting & necessary Anti-<br>termite treatment & All the frame work to be considered of Gypsum India company <br>& All the Wooden dutta will have 100x100x12mm thk (Insu Sound-Bcap rubber of <br>Supreme ) behind between wall and wooden dutta

od92820/2024_2025 : 150MM WIDE MOULDING <br>Providing & fixing of the 150mm wide x 37.5mm thk wooden molding, Design as per <br>Architect approved in side wall panel fix with necessary support on G.I frame work. <br>Molding will be finished with Melamine polish as approved & satisfied by Architect <br>including machine sanding, applying hard putty, scaffolding etc complete. work will be <br>carried out as per drg & instruction of acoustic consultant / Site Engineer /Architect.<br>NOTE :All the wood shall be used will be coated with Fire painting & necessary Anti-<br>termite treatment. All the G.I frame work to be considered of Gypsum India company

od92821/2024_2025 : 50MM WIDE MOULDING <br>Providing & fixing of the 50mm wide x 37.5mm thk wooden molding, Design as per <br>Architect approved in side wall panel fix with necessary support on G.I frame work. <br>Molding will be finished with Melamine polish as approved & satisfied by Architect <br>including machine sanding, applying hard putty, scaffolding etc complete. work will be <br>carried out as per drg & instruction of acoustic consultant / Site Engineer /Architect.<br>NOTE :All the wood shall be used will be coated with Fire painting & necessary Anti-<br>termite treatment. All the G.I frame work to be considered of Gypsum India company

od92822/2024_2025 : BLACK PP FABRIC MASKING <br>(AS MARKED IN THE DRAWING - WF-06)<br>Providing & fixing G.I frame work for Black PP fabric masking as per drawing.<br>FRAME - G.I.frame fabricated with 50 x 34x36x0.55mm 0.5 G.I 'C' section @ 1220mm c/c in<br>horizontal direction fixed to or away from wall surface with top & bottom section and <br>necessary 50 x 50mm wooden dutta if any required as per site condition, Above 'C' <br>section have Ceiling sections of 80 x 26 x 0.5 @ 400mm c/c in vertical direction including<br>scaffolding, machine screw , etc complete.Work will be carried out as per drg &<br>instruction of Acoustic consultant / Site Engineer /Architect.<br>FINISH: Black PP fabric shall be finish on 75x12mm (FR) ply patty as per shapes,pattern<br>as mentioned in the drawing on G.I frame work<br>NOTE :All the wood shall be used will be coated with Fire painting & necessary Anti-<br>termite treatment & All the frame work to be considered of Gypsum India company <br>NOTE : Install PP fabric without wrinkles or folds maintaining horizontal/vertical<br>alignment of warp/ woof of fabric using technique that will not damage the finish of fabric

od92823/2024_2025 : SHUTTER IN MASKING FOR SOUND BOX ACCESS<br>Providing & fixing of the 19mm thk FR ply Shutter in Black masking for Sound box <br>access finished with Black PP Fabric from outside & Black Paint from inside, including<br>the necessary frame for fixing shutter & hinges-02 no's, Concealed Handle, Bolkage etc <br>complete. Work will be carried out as per drg & instruction of acoustic consultant /Site <br>Engineer/Architect. Shutter size -750 X 1200mm

od92824/2024_2025 : SKIRTING IN BLACK LAMINATE FINISH<br>Providing / fixing 200mm high skirting in 19mm thk ply fixed on existing frame work.<br>flushed with above panelling,Skirting finish with 1.5mm thk Black Laminate as approve<br>by Architect till satisfaction including cutouts for power sockets.Work will be carried<br>out as per drg & instruction of acoustic consultant,Site Engineer / Architect.<br>Basic Rate of Laminate- = Rs - 650/sq.mt<br>NOTE :All the wood shall be used will be coated with Fire painting & necessary Anti-<br>termite treatment

9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood

od92826/2024_2025 : Providing & making of the 125mm thk Acoustical Door shutter in hard wood frame of 75x37.5mm all<br>around both side and intermediate frame of 50x37.5mm @ 600 mm c/c in both direction, keep 50mm thk<br>1000gsm density micron in between frame both side with 01 layer of 10kg/m2 Tec sound & 01 layer of<br>12.5mm thk plain gypsum board in between both hardwood frame work, Door Shutter shall be finished<br>with 1.5mm thk Laminate as per Architect, design drawing & pattern. All the edges of the shutter shall be<br>finished with T.W lapping putty as per detail

od92827/2024_2025 : PORT HOLE WINDOW FIXED<br>Providing & fixing of the port hole window 1000mm x 800mm or as per designed in 19<br>mm fire proof ply with necessary teak wood frame, (1" thick) Ply shall be finished with 1.5mm<br>thk Black Laminate including 12mm thk clear no reflective Modi flat glass with 'U'<br>rubber all around the glass complete in line & level etc,Work will be carried out as per<br>drg & instruction of acoustic consultant / Site Engineer / Architect.<br>NOTE :All the wood shall be used will be coated with Fire painting & necessary<br> Anti-termite treatment

od92828/2024_2025 : LABOUR CHARGES FOR SPEAKER BRACKET FIXING ON WALL<br>Labour charges for fixing surround speaker bracket on existing ply base in side wall <br>& rear wall as per detail including scaffolding, levelling etc complete.Work will be<br>carried out as per drg & instruction of acoustic consultant /Site Engineer / Architect.

od92829/2024_2025 : PLY BATTEN FOR STEP LIGHT BACKING<br>Providing & fixing of the 125mm wide x 12mm thk ply batten fixed on the edge of the<br>cinema steps for supporting the step light. Edge of the ply shall be well projected<br>during the construction of the cinema steps.work will be carried out as per drg &<br>instruction of acoustic consultant / Site Engineer / Architect.

Finishing treatment

od172719/2024_2025 : FABRIC ON GRIPPER SYSTEM ( SIDE WALL & REAR WALL ABOVE 1200)<br>Providing & fixing<br>stretch fabric gripper system (UK) UPVC Grippers,standard,cove<br>mono,edge, but as required by<br>design & manufacture's specifications.<br>CORE - Fire retardant compressible polyster padding of<br>25mm thk including <br>scaffolding etc complete.Work will be carried out as per drg & instruction of<br>Acoustic<br>Consultant/ Site Engineer /Architect.<br>FRAME : Gripper fix on 75 x 12mm ply (fire<br>retardant) patty with 25 mm thk<br>Polyster padding as required by design.INSTALLATION:Installation in<br>accordance<br>with drawings and manufacturer's instruction. Installation of grippers in maximum<br><br>length possible. From end-to-end butt joints with hairline not be visible in finished<br>work. Install<br>grippers so that joints between core material & grippers are not <br>visible in finished work, rebate edge<br>of rigid core material for flush fit.Install <br>fabric without wrinkles or folds, maintaining horizontal/ vertical<br>alignment of <br>warp/woof of fabric, force fabric edges into clamping jaws, using tools and<br><br>techniques that will not damage finish of the fabric complete to the satisfaction<br>of the site<br>Engineer-In-Charge. SUBMITTALS : Shop drawings indicating<br>location, size, type,including frame,<br>core & fabric finish components, for each<br>panel in project. Drgs indicating construction details of<br>interface with adjacent<br>construction. The rates shall includes the shapes, pattern as mentioned in<br>the<br>drawing indicating graphics if any.

od172725/2024_2025 : BLACK CRAPE FABRIC FIXING ON PERFORATED GYPUM CEILING<br>Providing & fixing of Black<br>Crape fabric on perforated gypsum ceiling tile with 75x12mm <br>thk (FR) Ply patty as per grooves &<br>pattern mentioned in drawing in line & level <br>including scaffolding etc complete, Work will be carried<br>out as per drg & instruction of <br>Acoustic Consultant / Site Engineer /Architect. Basic Rate of Fabric- =<br>Rs - 225/mtr<br>NOTE : Install Crape fabric without wrinkles or folds maintaining<br>horizontal/vertical<br>alignment of warp/ woof of fabric using technique that will not damage the finish of<br>fabric

od172729/2024_2025 : FIXING PERFORATED WHITE SCREEN ON M.S FRAME<br>Fixing white perforated Galalite screen on<br>the M.S screen frame including scaffolding.<br>Work will be carried out as per drg & instruction of<br>acoustic consultant, Site Engineer<br>/Architect. SCREEN WILL BE SUPPLY BY CLIENT.

od172734/2024_2025 : Providing and fixing 560mm c/c Push Back Seat with a simultaneous movement of seat and Back, with an Auto Stop at all places. Seat has Lateral movement of the back and an inclined movement of the seat.<br><br>Structure shall be with a metal sheet mechanism duly embossed of size 450 x 440 x 1.6 mm and 2 triangular blocks duly embossed – 300 x 300 mm with 4 of 9mm holes. Longitudinal tubes of size 40 x 20 x 490 mm – with 2 tubes each and 4 longitudinal tubes of size 20 x 6 mm duly bent in shape to shape riveted / welded & approximately 350 mm long.<br>Seat back bracket interconnected / riveted / welded and back bracket to be 200 x 60 x 1.6 mm.Seat bracket to have stopper cup with 5 rivets and approximately 170 x 340 x 1.5 mm – 2 pairs for seat / back.All rivets to be with nylon washers and pneumatic machine only.Rollers to withstand temperatures up to 200° and of sizes – 22 mm width & 38 mm Dia, duly riveted and welded supported by metal sheet of size 30 mm x 120 mm – 1 pair.All stopper material to be reinforced by nylon tubes of size 30 mm.Metal stand to be 300 x 300 x 3 mm duly bent in 1piece supported by 3 structures 20 x 40 x 270 mm each.<br><br>Back shall be 14 mm (± 1mm) bent plywood of size 470 x 500 to 715 mm height covered with fabric and fused with foam of apparent density (Core density) 48+/- 5 Kg/m3.<br><br><br>Seat shall be 18 mm (± 1mm) plywood seat, size 480 x 490 x 19 mm with PP moulded seat. All side panels to be of 12 mm plywood covered with fabric and fused with foam of apparent density (Core density) 50+/- 5 Kg/m3. side panel to cover all metal parts.<br><br>Fabric – All Fabric – 100% polyester to be fused with 5mm / 7.5mm foam, wherever quilting is required.<br>Powder coating: to be by hoist and crane system followed by degreasing / de-rusting / Activation followed by 7 Tank powder coating process.<br><br>FABRIC shall be 100% polyester stretch fabric available in various colours, to be fused with 5mm / 7.5mm foam, wherever quilting is required. Full ABS plastic back shell for back.<br><br>ARM REST<br><br>Wooden Handles to be of size 425 x 25 x 55 / 70 mm depending on the ctc of the chair with Small Cup holders of 460 x 100 x 40mm duly ribbed and supported by 12mm plywood 350 x 70mm cushioned and upholstered.<br>Installation<br>Chairs are bolted to the ground using anchor / chemical fasteners of Hilti or any other similar brand.

od172737/2024_2025 : CARPET<br>Providing & fixing of 800gsm cut pile carpet with 06mm thk underlay to be fixed on<br><br>cinema tiers as per design & drawing of Architect, Surface shall be clean properly before<br><br>installing carpet, Carpet shall be fix with adhesive as per manufacture specifications, in<br>perfect<br>line & level , no joints should be visible, All as per approved design, shade & <br>make etc complete.<br>Complete work will be carried out as per drg & instruction of site<br>Engineer/Architect, Basic Rate of<br>Carpet- = Rs - 800/sq.mt

13.26 : Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

13.83.2 : Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.Two coats

13.85.3 : Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With water thinnable cement primer on walls surface having VOC content less than 50 grams / litre

Fabrication work

od172718/2024_2025 : MS SCREEN FRAME SUPPORTING FROM FLOOR & SLAB<br>Providing & Installing screen<br>supporting from floor in 18 guage M.S pipe 50mm<br>dia external frame and 25mm dia internal<br>frame including Elbow as per detail drawing with <br>100x100x19mm thk (Insu Sound-Bcap rubber of<br>Supreme) backing on floor & slab above <br>behind base plate, MS pipe shall be finished with Black<br>Paint, Work will be carried out as<br>per drg & instruction of Acoustic consultant, site Engineer/Architect

od172723/2024_2025 : M.S SPEAKER PLATFORM<br>Providing & fixing of M.S speaker platform in M.S angle of 75mm X<br>75mm as per <br>drg with 02 layers of 19mm thk Ply above frame with fabrication, levelling etc<br><br>complete including one coat of red oxide paint and two coat of Black paint as approved<br>M.S.<br>angle will be supported at 1200mm c/c with the 'L' bracket, The bracket will have<br>12mm thk (Insu<br>Sound-Bcap rubber of Supreme) in between wall & bracket. The <br>depth of the platform will be as per<br>site. Work will be carried out as per drg &<br>instruction of acoustic consultant /Site Engineer /Architect.

od181610/2024_2025 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying black paint (two or more coats) at all locations prepared and applied as per manufacture's specification including appropriate priming coat (red oxide paint), preparation of surface etc complete including cost and conveyance of all materials, labour, lead, lift etc. complete as directed by the Engineer-In-Charge at all levels.

od172738/2024_2025 : MS SPEAKER PLATFORM SUPPORTING FROM WALL FOR ATMOS<br>Providing & fixing of the M.S<br>speaker platform in M.S angle 75x 75mm as per <br>drawing for the sub woofer Base for Atmos speaker<br>supported from the wall with 12mm<br>thk (Insu Sound-Bcap rubber of Supreme) between the M.S<br>frame & wall to avoid <br>Vibrational sound in structure, including 2 layers of 19mm thk ply & 01 layer of<br>19mm thk<br>rigid rubber on ply complete with necessary weilding, grinding levelling etc. complete<br><br>including one coat of Red oxide paint and two coat of Black paint as approved by <br>Architect,<br>Vendor to give necessary shop drawing for the same for structural consultant <br>approval Work will be<br>carried out as per drg & instruction of acoustic consultant/Site <br>Engineer/Architect ( Platform size :<br>1350 X 1000mm)

od172740/2024_2025 : M.S BRACKET FOR ATMOS SPEAKER BASE FOR CEILING<br>Providing & fixing of the M.S bracketin square box pipe of 50x50mm for the speaker<br>bracket for Atmos speaker from the ceiling to besupported from the sub frame of M.S<br>truss girder with necessary base plate & 12mm thk(Insu Sound-Bcap rubber of Supreme)<br>at Junction to avoid Vibrational sound in structure, including necessarywielding, grinding<br>finished with 1coat of Red oxide & 2 coat of Black Paint etc complete. Vendorto<br>give necessary shop drawing for the same for structural consultant approval Work will<br>becarried out as per drg & instruction of acoustic consultant/Site Engineer/Architect <br>Base Size : 375 x375mm<br>

od172742/2024_2025 : FIRE CABINETS<br>Providing & Fabricating 1200mm x 900mm x 450mm(for tender to be provided<br>as per system supplier’s drawings) fire cabinet boxes in all the theatres made from<br>12mm thk 'E'-board finished with 1.5mm matt Black laminate. 100x30 Salwood <br>shutter frame. 6mm Modi FlatClear Glass with frosted film fitted in the frame with<br> 6mm neoprene ‘U’ gaskets. 2 UNION makeheavy duty SS hinges. 1 UNION<br>make heavy duty matt finish SS handle. Painting inside surfaces ofcabinet with<br>Matt Black water based paint etc complete for intended use in every respect,Work<br>will be carried out as per drg & instruction of MEP consultant / Site Engineer/Architect

Isolation Treatment

od172717/2024_2025 : THX WALL BEHIND SCREEN<br>Providing & fixing - 03 layer of 12.5mm thk plain gypsum board One<br>side of M.S stud <br>section frame work in staggered joint screwed to stud frame as per<br>drawing<br>FRAME - GI Stud frame fabricated with 146 x 34 x 36 x .55 'C' section @ 600 mm c/c<br>in<br>one direction with necessary 50 x 50mm wooden 'T' support as required as per site<br>condition,<br>including 75mm thk 1000gsm density micron fixed with chicken mesh back of<br>G.I 12x12mm square of<br>24 guage & Black Crape fabric from back side of framing,<br>including scaffolding etc complete. Work<br>will be carried out as per drg & instruction of<br>Acoustic consultant/ Site Engineer /<br>Architect.<br>JOINTS - All joints of Gypsum panels filled and finished with India Gypsum<br>jointing<br>compound, jointing tapes etc. complete as per manufacturer specification for joint<br>TOP<br>COAT – Final Layer of Gypsum shall be finished with Black Paint as approved by<br>Architect / till the<br>satisfaction of site Engineer

od172726/2024_2025 : SURROUND SPEAKER ISOLATION <br>Providing & fixing of size 450 x 300 x 19mm thk Ply for thespeaker bracket fixing on <br>wall with 100 x100 x 19mm thk (Insu Sound-Bcap rubber of Supreme) 04nos in <br>between ply & wall as per detail etc complete. Work will be carried out as per drg&<br>instruction of acoustic consultant /Site Engineer /Architect.

od172730/2024_2025 : ISOLATION BASE FOR MAIN SPEAKER <br>Providing & making of the isolation base for the mainspeaker as per drg in 02 layer <br>of 19mm thk ply & in between ply have 01 layer of 100 x 100 x 25mmthk rigid rubber<br>pads on all four sides & keep 25 mm thk 32kg/m3 gsm density glass wool inbetween<br>ply. Base shall be covered with Black resin & shall be mounted on 2 layer of 150 x 150<br>x25mm thk rubber of sylomor @ 04 corners, etc complete as per detail. Work will be <br>carried out asper drg & instruction of acoustic consultant /Site Engineer/Architect. <br>( Isolation Base size = 750mm X600mm )

od172731/2024_2025 : ISOLATION BASE FOR SUBWOOFER SPEAKER <br>Providing & making of the isolation base for thesubwoofer as per drg in 02 layer of <br>19mm thk ply & in between ply have 01 layer of 100 x 100 x25mm thk rigid rubber<br>pads on all four sides & keep 25 mm thk 32 kg/m3 density Glass wool inbetween ply<br>The base shall be covered with Black resin & shall be mounted on 2 layer of 150 x150<br>x 25 mm thk rubber of sylomor @ 04 corners, etc complete as per detail. Work will be<br>carried out as per drg & instruction of acoustic consultant /Site Engineer/Architect. <br>( IsolationBase size = 1200mm X 900mm )

Furniture

od174823/2024_2025 : Supply and installation of work table - 4020 size shall be 1200 Width x 600 Depth x 740 Height. The top shall be made from 25 mm thick pre- laminated board. All the edges are sealed with 2 mm thick PVC edge band all around. Side panels shall be made from 25mm thick pre- laminated paticle board. All the edges are sealed with 2 mm thick PVC edge band on the user side and 0.8 mm on the top and bottom side.The side panels have 2 glide screws each for levelling of the desk. Modesty panel shall be made from 18 mm thick pre- laminated particle board. All the edges are sealed with 0.8 mm thick PVC edge band all around. Freestanding Pedestal shall be made from 18 mm pre- laminated particle board with a combination of 2 mm and 0.8 mm PVC edge band on all the exposed surfaces as per requirement. The drawers are provided with suitable slides for smooth operation. All the pedestal drawers are centrally locked with a single key.

od174824/2024_2025 : Supply and installation of Aristo Table 1200Lx600Dx750H Primary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-build power box are provided on work surface for wire management Secondary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security.

od174845/2024_2025 : Motion Chair SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric.The Back is injection moulded in glass filled Polypropylene which is upholstered with Mesh fabric. The back consist of adjustable lumbar support made of injection moulded Polypropylene having an adjustment of 3.0 ±0.1 cm. * Mesh Back Size : 45.5 cm. (W) x 54.0 cm. (H), * Seat Size : 48.5 cm. (W) x 49.0 cm. (D).2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density Min 48 kg/m³, and hardness load 15 ± 2 kgf as per IS:7888 for 25% compression.3. TILT MECHANISM, SPINES & SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The "S" shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion.The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which is inbuilt in seat base and the tension (return force) is user weight dependent.4a. ADJUSTABLE ARMRESTS: The assembly consists of armrest housing sliding over the armrest structure,both moulded in glass-filled Poly-amide. The height adjustment feature is button operated having adjustment of 6.6±0.5cm. The Armrest Top is made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide. 5. PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 ± 0.3 cm 6. PEDESTAL ASSEMBLY: The pedestal is injection moulded in glass-filled Poly-amide and fitted with 5 nos.twin wheel castors. The pedestal is 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors.7.TWIN WHEEL CASTORS: 5 nos. twin wheel castors are injection moulded in Poly-amide having 5.0±0.1cm wheel diameter and assembled to the pedestal.

od174877/2024_2025 : Supply and installation of Enterprise 1200 Table without CPU Hanger size shall be 1200 Width mm x 600 Depth mm x 728 Height mm. Top shall be 18mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board. The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA, Finish: powder Coat(epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube finish powder coat (epoxy polyster). The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster)

od174908/2024_2025 : Unwind chair w/o arm -The Seat and Back should be made up of injection moulded indoor grade PolyPropylene compound SEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H) The powder coated ( DFT 50±10 microns ) welded tubular frame should be made from 0 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm MSERW tube. The shoes should be made of indoor grade PolyPropylene compound and snap fitted with tubular frame.Overall Dimensions of Chair- Seat Height - 45.0 cm. Height - 84.5cm.Width-52.5 cm and Depth-55.8 cm.

od174889/2024_2025 : Oxbo mid back chair -Providing, supplying and placing of Mid Back Chair. SEAT ASSEMBLY: The seat assembly should be made up of 1.2 ±0.1cm. thick hot-pressed plywood , upholstered with fabric upholstery covers and moulded Polyurethane foam.plywood , SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D).BACK ASSEMBLY: The back asembly. should be made of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn.BACK SIZE : 46.5 cm (W) x 60.5 cm (H).HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression.ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. CENTRE-TILT mechanism: The mechashould be m should be designed with the following features:• 360° revolving type.• 17° ±2° maximum tilt on pivot at centre • Upright position locking. • Upright position locking. • Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm.TELESCOPIC BELLOW ASSY: The bellow should be 3 piece telescopic type and injection moulded in Black Polypropylene.PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors.)TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black nylon.Overall Dimensions of Chair Seat Height - min 43.3 to max 54.3cm.Height - min 89.5 to max 100.5cm.Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm.

od174918/2024_2025 : Supply, Fitting & Fixing of Filing cabinet. Overall size shall be 1320mm(H) X 470mm(W) X 620mm(D). All the components shall be made of CRCA . It should have 1 Point Locking Mechanism and a Rigid Knock Down Construction. The Top, Side & Drawer Front thickness should be 0.7mm. The Frames, Drawer-inside cover and Side Back Side thickness should be 0.6mm. The Back, Bottom and Drawer thickness should be 0.5mm. Easy to grip Full length Recess Handle shall be integrated into Metal Drawer for easy pull out convenience. There shall be a Snap on type plastic label holder on Drawer Fronts. In addition, 28 ‘Ezee’ / ‘Visa’ files (Foolscap) from front to back of thickness 20mm per drawer can be hanged in Filing cabinet. The Centralized locking System shall be provided along with Shooting Bolt Mechanism and 10 Lever Cam Lock. The VFC should have anti-tipping arrangement which ensures that when one drawer is opened for use, it does not allow other drawers to be opened. The High Quality Precision Ball Slide shall be provided with Drawer Load capacity of max 40 kg and UDL for 75,000 cycles (BS). Plain Triangular plate pop should be riveted at the bottom corners for rigidity. Optional Accessories like Drawer Partition and Cradle for hanging A4 file folders front to back should also be available. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10).

od174906/2024_2025 : PISA sofa-Providing, supplying and placing of three seater sofa. SEAT FOAM : The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette.BACK FOAM : The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette.UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose.LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. 3 str Width (W): 206.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45.0 CM.

od174907/2024_2025 : Providing, supplying and placing of PISA sofa. SEAT FOAM : The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette.BACK FOAM : The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette.UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose.LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. 1 str Width (W): 86.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45.0 CM.

WIRING

od159407/2024_2025 : Installation, testing and commissioning of 42 U audio rack including rack plates, assembling, wiring, electrical wiring and earthing.

od159410/2024_2025 : Supply, laying, installation, and commissioning of speaker wiring using 2 Nos. 6 Sq.mm multistranded flexible FRLS PVC wire in Existing FRLS medium guage PVC conduit with accessories for speakers laying on surface / concealed as required.

od159411/2024_2025 : Supply, laying, installation and commissioning of speaker wiring using 2 Nos. 4 Sq.mm multistranded flexible FRLS PVC wire in Existing FRLS medium guage PVC conduit with accessories for speakers laying on surface / concealed as required.

od172703/2024_2025 : Supply, laying, installation, and commissioning of speaker wiring using 2 Nos. 2.5 Sq.mm multistranded flexible FRLS PVC wire in Existing FRLS medium guage PVC conduit with accessories for speakers laying on surface / concealed as required.

1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

1.21.3 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm

Computer and other Electronic Equipment

od173245/2024_2025 : Supply, installation, testing and commissioning of Thermal printer. POS Tm-m30 II 422 USBand lan port thermal printer

od173260/2024_2025 : Supply, installation, testing and commissioning of Desktop 512 SSD, 8GB RAM, SSB with OS and PC core i5 HDMI & VGA, 3 year on site warranty

od173259/2024_2025 : Supply, installation, testing and commissioning of Cash counting machine with fake note detection. UV, MG, IR Detection during counting. Automatic half note, calculation of total note, chain note, double note detection, Automatic start, stop and clearing with batching. Adding and self examination display function

od173262/2024_2025 : Supply, installation, testing and commissioning of A4 black and white laser all in all printer (MSP). Print, scan, copy, print speed up to 22 ppm, print resolution 600 x 600 dpi, USB, ethernet and wireless connectivity

UPS and ACCESSORIES

od172629/2024_2025 : 5 kVA UPS(4K Projector)<br>SITC of 5 kVA,single phase input,single Phase output, true on-line UPS System with 30 minutes back up , with isolation transformer, voltage stabilizer including all accessories, SMF batteries VRLA type with powder coated CRCA cabinet including all accessories cabling etc as required complete having following specification. RS485 Interface compatibility Fully digital controlled based on DSP Power factor corrected from end > 0.9 Pure sine wave output. Regulated output voltage & frequency. Auto regulation of battery end voltage Intelligent interface with LED/LCD display Static bypass switch / manual by pass switch Auto temperature compensation, Remote Management Interphase, Back up time 30 minutes at full load.<br>The system shall have 2 years warranty for UPS and batteries, including rack and interconnecting cables. The Annual Maintenance Contract (AMC) for the UPS for 5 years shall be provided from the date of commissioning. The UPS will provide 30 minutes of backup using a Sealed Maintenance-Free (SMF) battery from a reputable, approved manufacturer, with the required Amp-Hour (AH) rating, supported by calculations..The cabling between UPS and Batteries shall be in the scope of Contractor.

od172630/2024_2025 : 20 kVA UPS(For Sound System)<br>Supply, Installation, Testing and Commissioning of 20 kVA, Three phase input, Single Phase output, High Performance IGBT/PWM based True-On-Line Double Conversion UPS system with Isolation transformer and 30 minutes back up including SMF batteries VRLA type with powder coated CRCA cabinet including all accessories and cabling etc as required complete having following specification. The UPS system consist of one numbers of UPS unit and one set of battery bank ,Fully digital controlled based on DSP, Power factor corrected from end > 0.95 ,Input THDi <3%, Pure sine wave output. ECO Mode for efficiency up to 98%,Full time output voltage & frequency regulation, Auto regulation of battery end voltage Intelligent interface with LED/LCD display, Static bypass switch, manual by pass switch Auto temperature compensation, Remote Management Interphase, testing as per various load conditions shall be done at site to establish the supplied item is complying the specifications.<br> <br>>The system shall have 2 years warranty for UPS and batteries, including rack and interconnecting cables. The Annual Maintenance Contract (AMC) for the UPS for 5 years shall be provided from the date of commissioning. The UPS will provide 30 minutes of backup using a Sealed Maintenance-Free (SMF) battery from a reputable, approved manufacturer, with the required Amp-Hour (AH) rating, supported by calculations.The cabling between UPS and Batteries shall be in the scope of Contractor.