Kerala State Electricity Board Tender

Fitting and erecting one HT DP using PSC pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.

Doing HDD along/ across roads, supplying and pulling 125mm HDPE pipe duct and drawing 11kV 3x300Sq mm Aluminium XLPE UG cable through the duct including surveying the site for collecting information about under ground utility installations and other obstructions using suitable modern sensing equipments, restoring the damages occurred if any, pit marking, pilot drilling, pre raming, closing of pits with normal soil/filled sand/crusher sand and consolidation to the satisfaction of the road owner and traffic police as they insist, taking the cable to the open trenches, RMUs, transformer yards etc., mounting the cable after providing loop at 1.2m depth , putting HDPE (PN-6,Kg/sq mm) at rising point(0.5 m below ground level and 1.5m above ground level) making RCC jointing chambers for straight joints if any, testing commissioning, placing route markers at 100m interval, writing identification name ,date of laying ,date of commissioning etc. legibly on the cable rising using polyurathane paint etc. as per the direction of departmental officers including supply of HDPE pipe. (includes cost of labour, transportation charges of UG cable etc.)

Supplying and laying of 110mm dia. HDPE pipe ISI marked along with all accessories like socket, bend, couplers, etc. wherever necessary, complete with fittings and cutting, joining etc. complete as required

Providing, laying and fixing 150mm dia GI pipe (medium class) in ground complete with GI fittings including trenching (75cm deep) and refilling etc as required.

Additional rate for excavating trench on tarred/concrete surface of specified size.

Doing one cable end termination on cables of sizes beyond 3x185 sqmm and upto and incl. 3x300 sq mm using the cable jointing kit supplied departmentally.

Doing straight joint on cables of sizes beyond 3x185 sqmm and upto and incl. 3x300 sq mm using the cable jointing kit supplied departmentally as per specification.

Additional rate for excavation of one Earth Pit (2.5m depth) in Hard Laterite.

Providing one Earth using earth pipe incl. digging separate pit at standard distance away from the pole/structure & backfilling.

Fitting one set AB switch and giving connection

Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials.

Drilling hole of various sizes on existing Channel/Cross Arm.

Fitting one set (3No.) 11kV LA and giving connections excluding earthing.