Kerala State Electricity Board Tender

Providing and laying in position cement concrete specified grade of cement concrete, excluding the cost of centering, shuttering, - All work up to plinth level :CC 1:4:8 ( 1 cement: 4 coarse sand(Zone III): 8 graded stone aggregate 40mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : RCC 1:2:4 ( 1 cement: 2coarse sand (ZoneIII): 4 graded stone aggregate 20mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of formwork for all height for Foundations, footings, bases of columns, etc. for mass concrete

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Plastering with 12 mm thick cement plaster of mix 1:4 using cement 5.47 kg/m2,one coat floated hard and trowelled smooth for inside and out side walls, foundations etc. including cost of scaffolding and labour for watering,curing etc complete.as per the direction of deptl officers at site.

Supply of 8M Octagonal Pole of RRIspat / Surya / Philips Make with OEM Supplied EN8 grade foundation bolts and 0.5M Single Arm.

Installation of 8M Octagonal Pole with suitable equipment & wiring to light fittings. Light fittings- Departmental supply.

Supply & Installation of GI Pipe earthing with 1.5m long pipe of 40mm dia including connection to above pole with GI strip (strip including upto 5m) including all labour.

Supplying of 4 core 6 SQ.MM Aluminium armoured PVC Cable

Supplying, erecting, testing & commissioning floor mounting, dust & vermin proof cubicle type outdoor yard light Kiosk (415 V, 3Ph AC) of size 800x400x1200 mm with base channel of suitable size, canopy top etc using 2mm GI sheet & MS angles 35x35x3 mm or required size, with double door with handle lock, cable entry slots at bottom, cable supports using slotted angles & MS flats 25x3mm or 50x6mm and GI nut & bolt, inside and out side of the panel painted with synthetic enamel paint of approved quality and shade, two coats over a primary coat, fitted with one number 63A TPN switch fuse unit with steel enclosures, 1 set 60 A, 900 mm busbar chamber with sheet steel enclosures, dust and vermin proof finished in suitable colour, detacheble front with copper bus supported on DMC/FRP/PVC insulator and bus bars sleeved with heat shrink sleeves, on porcelain insulator and seperate cable entry socket with phase colour indication, TPN, 415 V, 50Hz, etc & seperate cable entry & outlet box with suitable glands with colour indication, providing seperation wherever necessary with hylem sheet and one no. 16/15A Switch Socket combination with SPN MCB of required rating, with provision for fixing 15 Nos DP MCB danger board of size 250 x 200mm, earthing the Kiosk etc complete.

Uncoiling 4/2 core 2.5sqmm control cable (armored or unarmored) from cable drums and cutting to required length and laying through trench/pipe/cable tray neatly and carefully including for providing loops wherever necessary and cable marker at both ends of cable as per direction of departmental staff at site.

Supplying and fixing of PVC weather proof, fire retardant pole mounted yard light boxes having size of 20 X 14X9.5 cm with 1 nos of Two pole MCB of approved quality and giving connections as per the direction of department officer at site

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existingRCC/ HUME/ METAL pipe as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Setting up of anchor bolt in correct lines and levels using templates of all types in concrete foundation excluding concreting and backfilling which are measured separately and paid for removing the template after sufficient time etc. complete as per the directions of departmental officers at site

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

Termination of cables in panel by using cable glands of fixing the cable rigidly by any means as per direction of departmental staff at site charges include for providing necessary suitable hole in the gland plate etc.

Doing termination of all sizes of PVC insulated copper control cable 4 /2.5 mm², pealing, providing number and letter ferrules in the wire, stripping ends, crimping with suitable lugs and connecting to the terminals in the panel board and marshalling kiosk etc., neatly and carefully including cost of copper sockets and ferrules as per the direction of Departmental Officers at site.

Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement , trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 40mm dia 4 Kgf/cm2

Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2

Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching and refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 4 Kgf/cm2

Manual carriage charges for the initial 50m including loading, unloading and placing precast concrete coverslabs over cable trenches as directed by dept. officers

Supplying and fixing 20 mm PVC flexible pipe to lamp posts for cable entry as per the direction of departmental officers at site

Supplying and fixing PVC flexible pipe gland of approved quality as per the direction of departmental officers at site