Kerala State Electricity Board Tender

Excavation of cable trench of appropriate size ( normally 1.2m deep and 0.35m /0.5m wide for single/double run) in all classes of soil including breaking clods, watering, ramming and sectioning of soil bank etc. and back filling the soil after cable laying and consolidating the soil in layers of 75cm (excluding laying of cable).

Transportation of single core 630sqmm PVC/XLPE 110kV cable including loading and unloading from its place of storage to site properly with out causing any damage to its insulation and make ready for laying as per the direction of dept officers

Laying 110 kV, single core, 630 sq.mm Aluminium conductor, Cross-linked polyethylene insulated, lead / corrugated Aluminium sheathed and PVC/HDPE outer jacket under ground cable (3 number of cables for one circuit) in seperate/ trefoil formation with aluminium trefoil clamps(including supply of clamps)/ with standard spacing as per tender drawing along the already excavated trenches /pipes/built up trench and sand bed formed including all charges for handling, uncoiling and paving of cable in trenches using standard cable installation equipments such as cable pulling winch, rollers etc with design pulling tension and with in bending radius after providing all necessary precautions to be followed as per IEC/IS specifications carefully without damaging the existing pipe lines, cables, water lines etc. and rectifying the damages if any, occured to the existing installations, providing aluminium identification tags of 150x50mm size and 1mm thick embedded with the mark"KSEBL 110kV Cable" at both end of the cable in each phase. Cable (Rate for One Circuit/meter) and stacking the balance cable safely, but excluding laying HDPE pipes, providing holes, back filling etc