Kerala State Electricity Board Tender

Providing one Earth using earth pipe incl. digging separate pit at standard distance away from the pole/structure & backfilling.

Laying 11 kV 3x300 sqmm XLPE UG cable by horizontal directional drilling method along/across roads, supplying and pulling 110 mm HDPE/GI pipe duct, drawing 11 kV 3x300 sqmm XLPE UG cable through the duct including surveying the site for collecting information about under ground utility installations and other obstructions using suitable modern sensing equipments, restoring the damages occured if any, pit making, pilot drilling, pre reaming closing of pits with normal soil/filled sand/crusher sand and consolidation to the satisfaction of the road owner and traffic police as they insist, taking the cable to the open trenches, RMUs, transformer yard etc, mounting the cable including clamping after providing loop at 1.2m depth, putting HDPE (PE63.4kg/sqcm) at rising point (0.5m below ground level and 1.5m above ground level) making RCC jointing chambers for straight joints if any, testing commissioning , placing route markers at 100 m interval, writing identification name, date of laying, date of commissioning etc legibly on the cable rising polyurathane paint etc as per the direction of departmental officers, providing with as built laminated cable route drawing, marking the HDD pits, distance of pits from the boundary of the road, length of the cable bit etc including the cost of all materials, labour and hire charges, loading the cable from KSEB stock yard and transporting the cable using contractor supplied trailer and unloading the same at work site. Complete except the cost of 3 core 300 mm2 XLPE UG cable

Excavation of cable trench in all classes of soil and backfilling after laying of cable (excluding laying of cable).

Mounting the cable ends of all sizes upto and incl. 3x300 sq mm with special type cable clamps incl. cost of extra materials if needed and giving necessary connections.

Drilling hole of various sizes on existing Channel/Cross Arm.

Laying HT XLPE UG cable (of sizes beyond 3x185 sqmm and upto and incl. 3x300 sqmm) as per specification excl. excavation and backfilling.

Additional rate for excavating trench on tarred/concrete surface of specified size.

Fitting one LT 4 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT Line.

Fitting one set AB switch and giving connection

Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials.

Fitting one LT 2 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT Line.

Renewal of existing damaged/old 11kV TW/RSJ/Rail DP with new A type DP in place and refitting of all items incl. conveyance (except poles).

Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle).

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.

Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification).

Fitting 3 channel cross arms, AB switch, DO fuse, LA, HT & LT connections on existing DP, 3 LT fuses.

Loading LT PSC pole from the stacking place and unloading the same at work site (transport by vehicle)

Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit.

Erecting one LT PSC Pole in position incl. digging & back filling pit.

Providing Stay for LT poles incl. digging & back filling pit.

Additional rate for refitting/redoing one Shackle set and reshackling one span while renewing any type of pole.

Reconductoring one km LT 3ph 4 wire OH old line with new 3 ACSR Rabbit and one Weasel conductor incl. conveyance of materials.

Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion.

Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion.

Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole and reconnecting.