Kerala State Council For Science Technology And Environment Tender

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285 fixing with dash fastners of required dia and size including necessay filling up the gaps at junctions ie at top, bottom and sides with required EPDM rubber /neoprene gasket etc. Aluminum sections shall be smooth rust free, straight, mitred and jointed mechanically wherever reqquired including cleat angle, Aluminium snap beading for glazing/ paneling C.P brass/ stainless steel screws all complete as per architechural drawings and the directions of Engineer in charge. (glazing , panelling and dash fastners to be paid for seperately) powder coated aluminium (minimum thichness of powder coating 50 micron)with 4mm thick aluminium composit panel EPDM rubber / neoprene gasket combosit panel of 4 mm thickness etc. (kitchen cabinet model frameless work) Complete as per direction of Engineer incharge.

Providing and fixing panelling in aluminium door, window, ventilator shutters and partitions etc. with 3mm thick hylam sheet and EPDM rubber / neoprene gasket etc. Complete as per direction of Engineer incharge.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. Using equal angles/ M.S flats etc, as per direction of Engineer incharge

Providing and fixing Thomson Multi wood board or equivalent make paneling 12 mm thick, to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately) as per the direction of site Engineer-in-charge.

Painting two coat with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Providing and fixing C.P long body three way lab tap of approved quality conforming to IS standard including all cost of materials and labour charge 15mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931,15 mm nominal bore

Provding and fixing rubber bushes in the table legs with approved quality including all labour charges etc Complete.

Supplying and fixing vertical blinds of standard size and pattern ( as approved by concerned official in charge) including necessary aluminium channels, and accessories , cost of all materials, labour ect. Complete.

Providing and fixing white vitreous china laboratory sink with C.I brackets, C.P. brass chain with rubber plug 40 mm C.P brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required:Size 600x450x200 mm