Kerala State Coastal Area Development Corporation Limited Tender
... More
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 50,000Document Cost
₹ 5,900Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_SCADC_754468_2Tender No
ET-96/2024-25Tender Authority
Kerala State Coastal Area Development Corporation Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
OD27577/2023-2024
Diluting and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti-termite
treatment (excluding the cost of chemical emulsion) Treatment of soil under existing
floors using
chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm
diameter holes With
Chlorpyriphos/Lindane E.C. 20% with 1% concentration -OD based on
2.35.3.1Details of cost for 9 sqm (3 metre x 3 metre)
No. of holes - 100 nos.
MATERIAL:
Chlorpyriphos 1% required
100x1 litre = 100 litres
Chlorpyriphos 20% E.C. = 100/20 = 5.0 litres
Chlorpyriphos 20% E.C./Lindane 20% E.C. 5 Litres (to be supplied free of cost)
LABOUR:
470.87
-
-
... More
4.1.8
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4
coarse sand : 8 graded stone aggregate 40 nominal size)
35.63
-
-
... More
7.1.1
Random rubble masonry with hard stone in foundation and plinth including levelling
up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate
20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse
sand)
38.3
-
-
... More
5.33.1
Providing and laying in position machine batched and machine mixed design mix M-
25 grade cement concrete for reinforced cement concrete work, using cement content
as per approved design mix, including pumping of concrete to site of laying but
excluding the cost of centering, shuttering, finishing and reinforcement, including
admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting
of concrete, improve workability without impairing strength and durability as per
direction of Engineer - in-charge. Note:- Cement content considered in this item is @
330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable
separately.All work upto plinth level
75.36
-
-
... More
5.33.2
Providing and laying in position machine batched and machine mixed design mix M-
25 grade cement concrete for reinforced cement concrete work, using cement content
as per approved design mix, including pumping of concrete to site of laying but
excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting
of concrete, improve workability without impairing strength and durability as per
direction of Engineer - in-charge. Note:- Cement content considered in this item is @
330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable
separately.All work above plinth level upto floor V level
76.87
-
-
... More
5.9.1
Centering and shuttering including strutting, etc. and removal of form
for:Foundations, footings, bases of columns, etc for mass concrete
227.37
-
-
... More
5.9.6
Centering and shuttering including strutting, etc. and removal of form for:Columns,
Pillars, Piers, Abutments, Posts and Struts
235.99
-
-
... More
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels,
beams, plinth beams, girders bressumers and cantilevers
420.47
-
-
... More
5.9.3
Centering and shuttering including strutting, etc. and removal of form for:Suspended
floors, roofs, landings, balconies and access platform
304.26
-
-
... More
5.9.16.1
Centering and shuttering including strutting, etc. and removal of form for:
Edges of slabs and breaks in floors and wallsUnder 20 cm wide
131.22
-
-
... More
5.9.19
Centering and shuttering including strutting, etc. and removal of form for:Weather
shade, Chajjas, corbels etc., including edges
71.68
-
-
... More
2.25
Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.).
182.22
-
-
... More
50.2.25.1
Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of
foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction
of site Engineer-in-charge
116.25
-
-
... More
5.22.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete upto plinth levelThermo - Mechanically Treated
bars of grade Fe-500D or more
8054.77
-
-
... More
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete above plinth level.Thermo - Mechanically
Treated bars of grade Fe-500D or more.
9439.76
-
-
... More
50.6.1.4
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm
or nearest available size confirming to IS 2185 part I of 1979 for foundation and
plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc
complete
18
-
-
... More
50.6.1.5
Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm
or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to
floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc
complete
101.9
-
-
... More
50.6.2.1
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm
or nearest available size confirming to IS 2185 part I of 1979 for foundation and
plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
7.82
-
-
... More
50.6.3.2
Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm
or nearest available size confirming to IS 2185 part I of 1979 for super structure up to
floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including
cost of scaffolding complete
10.22
-
-
... More
8.2.2.1
Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and
prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias
and similar locations, of required size, approved shade, colour and texture laid over
20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with
white cement, mixed with matching pigment, epoxy touch ups, including rubbing,
curing, moulding and polishing to edges to give high gloss finish etc. complete at all
levels.
Granite of any colour and shadeArea of slab upto 0.50 sqm
14.58
-
-
... More
OD27583/2023-2024
:Providing and fixing powder coated aluminium grill (minimum thickness of powder
coating 50 micron) of approved design/pattern, with approved standard section and
fixed to the existing
window frame with C.P brass/stainless steel screws @ 200 mm centre to centre,
including cutting the grill to
proper opening size for fixing and operation of handles and fixing approved
aluminium standard section
around the opening, all complete as per requirement and direction of Engineer-incharge.(
Only weight of grill
to be measured for payment ).
165.48
-
-
... More
21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions
with extruded built up standard tubular sections/ appropriate Z sections and other
sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash
fasteners of required dia and size, including necessary filling up the gaps at junctions,
i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed
mechanically wherever required including cleat angle, Aluminnium snap beading for
glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural
drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash
fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating
50 micron)
281.89
-
-
... More
50.13.1
9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of
materials, labour charges etc complete
737.45
-
-
... More
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
1099.68
-
-
... More
22.6
Providing and laying water proofing treatment on roofs of slabs by applying cement
slurry mixed with water proofing cement compound consisting of applying : a) after
surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water
proofing cement compound @ 0.253 kg/ sqm. laying second layer of fibre glass cloth
when the first layer is still green. Overlaps of joints of fibre cloth should not be less
than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289
kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse
sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water
curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall
and tucked into groove in parapet all around. d) fourth and final layer of brick tilling
with cement mortar (which will be paid for separately. For the purpose of
measurement the entire treated surface will be measured)
339.24
-
-
... More
13.43.1
Applying one coat of water thinnable cement primer of approved brand and
manufacture on wall surface:Water thinnable cement primer
1120.41
-
-
... More
13.83.2
Wall painting with premium acrylic emulsion paint of interior grade, having VOC
(Volatile including applying additional coats wherever required to achieve even shade
and colour.Two coats
1120.41
-
-
... More
13.46.1
Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two
or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior
primer applied @ 2.20 kg/10 sqm)
391.31
-
-
... More
OD27582/2023-2024
Providing and laying antiskid vitrified floor tiles in different sizes (thickness to be
specified by the manufacturer) with water absorption less than 0.08% and conforming
to IS : 15622, of
approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1
cement : 4 coarse sand),
including grouting the joints with white cement and matching pigments etc.,
complete.<br>Size of Tile 600 x
600 mm.
Details of cost for 1 sqm.
MATERIAL:
Vitrified floor tiles 60x60 cm size = 1.00 sqm
479.21
-
-
... More
11.46.2
Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by
manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622,
of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick
bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with
white cement & matching pigments etc. complete.Size of Tile 600x600 mm
198.81
-
-
... More
50.10.1
Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.)
trusses etc., including cutting, hoisting,fixing in position and applying a priming coat
of approved steel primer, including welding and bolted with special shaped washers
etc. complete
2385.05
-
-
... More
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing
in position and applying a priming coat of approved steel primer, including welding
and bolted with special shaped washers etc. complete
904.09
-
-
... More
10.1
Structural steel work in single section, fixed with or without connecting plate,
including cutting, hoisting, fixing in position and applying a priming coat of approved
steel primer all complete.
200.96
-
-
... More
OD31417/2023-2024
Providing and fixing Corrugated bitumen sheets of size 2000mm x 1045mm
approximately and approved color reinforced with cellulosic fibers and thermosetting
resin , 3mm thick
along with ridges & valleys.The roofing sheets shall be fixed to the structural
steel frame work to correct line
and level with overlap 20 cm, side overlap 1 corrugation, maximum purlin distance
45 cm. Fixing with
Onduline make / equivalent Speedy screws nominal diameter 4.2mm and Corrosion
category screw minimum
14 screws per sheet of matching sheet color complete as per manufactures
specifications and as per the
direction of the Engineer in charge.
Details of cost for 216.14 sqm
MATERIAL:
(External dimension of plinth).
Area of roof
20.2x10.70 m = 216.14 sqm.
MATERIAL:For Sheet size 2 x 1.045m, sheet area = 2.09m2 and the coverage is 1.74 m2. Hence sheet area required for
216.14m2 = 259.62m2
232.86
-
-
... More
50.12.2.1
Providing & fixing Poly carbonate corrugated sheet 0.8 mm thick as approved by the
Engineer in charge and should be supplied in a single length of 12 M or as decide by
the Engineer in charge. The sheets shall be fixed using self drilling / self tapping
screw of size (5.5x55 mm) with EPDM seal complete upto any pitch in horizontal/
vertical/ curved surface, but excluding the cost of purlins, rafters, trusses, and
including cutting to size shapes where ever required.
153.22
-
-
... More
10.6.1
Supplying and fixing rolling shutters of approved make, made of required size M.S.
laths, interlocked together through their entire length and jointed together at the end
by end locks, mounted on specially designed pipe shaft with brackets, side guides and
arrangements for inside and outside locking with push and pull operation complete,
including the cost of providing and fixing necessary 27.5 cm long wire springs
manufactured from high tensile steel wire of adequate strength conforming to IS:
4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25
mm M.S. laths with 1.25 mm thick top cover
172.44
-
-
... More
OD34457/2023-2024
Extra for providing grilled rolling shutters manufactured out of 6mm dia M.S bar
instead of laths as per design approved by Engineer in charges (area of grill to be
measured )
5.84
-
-
... More
10.7
Providing and fixing ball bearing for rolling shutters.
32
-
-
... More
13.52.1
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied
as per manufacturer's specifications including appropriate priming coat, preparation
of surface, etc. complete.On steel work
172.44
-
-
... More
OD27633/2023-2024
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or
more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80
ltr/10 sqm of approvedbrand and manufacture excluding priming coat
Details of cost for 10 sqm
216.36
-
-
... More
OD27614/2023-2024
Providing FRP (Fibre Reinforced Plastic) grating- grills spacing not more than 5cm.,
thickness of grill not less than 4cm and grill member thickness not less than 4mm
including all cost,
conveyance and labour charges etc. complete.
Quantity required for 1sqm including 5 % wastage= 1.05 sqm
2.84
-
-
... More
9.117.1
Providing and fixing factory made uPVC door frame made of uPVC extruded
sections having an overall dimension as below (tolerance ±1 mm), with wall thickness
2.0mm (±0.2 mm), corners of the door frame to be jointed with galvanized brackets
and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of
the frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1 mm (± 0.1
mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as
per manufacturer's specification and direction of Engineer-in-chargeExtruded section
profile size 48x40 mm
52.8
-
-
... More
9.147B.1
543
SUB HEAD : 9 - WOOD & PVC WORK
9.147B
Providing and fixing factory made uPVC white colour fixed glazed windows/
ventilators comprising of uPVC multi-chambered frame and mullion (where ever
required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized
mild steel section made from roll forming process of required length (shape &
size according to uPVC profile), , uPVC extruded glazing beads of appropriate
dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished
wall, plastic packers, plastic caps and necessary stainless steel screws etc.
Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if
required) shall be also fusion welded including drilling of holes for fixing
hardware's and drainage of water etc. After fixing frame the gap between frame
and adjacent finished wall shall be filled with weather proof silicon sealant over
backer rod of required size and of approved quality, all complete as per approved
drawing & direction of Engineer-in-Charge. (Single / double glass panes and
silicon sealant shall be paid separately).
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance
in dimension i.e. in depth & width of profile shall be acceptable.Fixed window /
ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both
having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate
dimension. (Area upto 0.75 sqm.)
3.63
-
-
... More
9.118.1
Providing and fixing to existing door frames24 mm thick factory made PVC door
shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall
thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails
mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size
75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of
the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm
(± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow
section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness,fixed to the shutter
styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a
uPVC multi-chambered single panel of size not less than 620 mm, having over all
thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically
and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and
fastened with nuts and washers, complete as per manufacturer's specification and
direction of Engineer-in-charge( For W.C. and bathroom door shutter).
15.75
-
-
... More
9.48.1
Providing and fixing M.S. Grills of required pattern in frames of windows etc. with
M.S. flats, square or round bars etc. including priming coat with approved steel
primer all complete.Fixed to steel windows by welding
54.45
-
-
... More
10.28
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes,
channels, plates etc., including welding, grinding, buffing, polishing and making
curvature (wherever required) and fitting the same with necessary stainless steel nuts
and bolts complete, i/c fixing the railing with necessary accessories & stainless steel
dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the
side of waist slab with suitable arrangement as per approval of Engineer-in-charge,
(for payment purpose only weight of stainless steel members shall be considered
excluding fixing accessories such as nuts, bolts, fasteners etc.)
168.01
-
-
... More
9.55.1
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with
necessary screws etc, complete:125x65x2.12 mm
36
-
-
... More
9.97.5
Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not
less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade,
with necessary screws complete:100x10 mm
18
-
-
... More
17.2.1
Providing and fixing white vitreous china pedestal type water closet (European type
W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including
flush pipe, with manually controlled device (handle lever), conforming to IS : 7231,
with all fittings and fixtures complete, including cutting and making good the walls
and floors wherever required:W.C. pan with ISI marked white solid plastic seat and
lid
5
-
-
... More
17.1.1
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm
Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including
flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with
all fittings and fixtures complete, including cutting and making good the walls and
floors wherever require:White Vitreous china Orissa pattern W.C. pan of size
580x440 mm with integral type foot rests
2
-
-
... More
17.4.1
Providing and fixing white vitreous china flat back or wall corner type lipped front
urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:One urinal basin with 5 litre white P.V.C. automatic flushing cistern
3
-
-
... More
17.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32
mm C.P. brass waste of standard pattern, including painting of fittings and brackets,
cutting and making good the walls wherever require:White Vitreous China Wash
basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
6
-
-
... More
17.10.1.3
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983
with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and
brackets, cutting and making good the walls wherever required:
Kitchen sink with drain board510x1040 mm bowl depth 200 mm
6
-
-
... More
17.32.4
Providing and fixing mirror of superior glass ( of approved quality) and of required
shape and size with plastic moulded frame of approved make and shade with 6 mm
thick hard board backing :Rectangular shape 1500x450 mm
6
-
-
... More
19.4.1.1
Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I.
grating brick masonry chamber with water tight C.I. cover with frame of 300x300
mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not
less than 2.70 kg as per standard design:
100x100 mm size P typeWith common burnt clay F.P.S. (non modular) bricks of
class designation 7.5
6
-
-
... More
19.33
Constructing soak pit 1.20x1.20 m filled with brickbats including S.W. drain pipe 100
mm diameter and 1.20 m long complete as per standard design.
3
-
-
... More
OD27598/2023-2024
Supplying and installing Concrete ring of 1.20 m diameter with 7.5 cm thickness and 30 cm height including sinking the rings in all classes of soil including all cost of conveyance, labour charges tools and plants and all other incidental charges etc.
complete.
18
-
-
... More
OD27591/2023-2024
Providing and fixing FRP anaerobic septic tanks of size 1512 Lit volume
(2000x900x840 mm or near size) and 5 mm thick for 50 flush/users including all cost
of labour, transportation and installation as ordered by Engineer in charge
2
-
-
... More
OD27590/2023-2024
Providing and Fixing Wall mounted stainless steel Grab bar 600mm long with anti
slip coating including the cost of carriage and fixing as specified as per the direction
of engineer in charge
4
-
-
... More
OD27529/2023-2024
Providing and Fixing stainless steel U shaped rail with anti slip coating (Wall
mounted rail with hinge) 600 X 100mm including the cost of carriage and fixing as
specified as per the direction of engineer in charge
1
-
-
... More
18.17.1
Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed end) :25 mm nominal bore
2
-
-
... More
18.17.2
Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed end) :32 mm nominal bore
2
-
-
... More
18.51.1
Providing and fixing C.P. brass long body bib cock of approved quality conforming to
IS standards and weighing not less than 690 gms.15 mm nominal bore
8
-
-
... More
18.52.1
Providing and fixing C.P brass stop cock ( concealed) of standard design and of
approved make conforming to IS: 893115 mm nominal bore
10
-
-
... More
18.58.2.1
Providing and fixing PTMT grating of approved quality and colour.
Rectangular type with openable circular lid150 mm nominal size square 100 mm
diameter of the inner hinged round grating
15
-
-
... More
18.65
Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102
mm, height of 75 mm with concealed fittings arrangements, weighing not less than
106 gms.
7
-
-
... More
17.60.1.1
Providing and fixing trap of self cleansing design with screwed down or hinged
grating without vent arm complete, including cost of cutting and making good the
walls and floors:
100 mm inlet and 100 mm outletSand cast iron S & S as per IS : 3989
10
-
-
... More
50.17.1.3
Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-incharge.
7
-
-
... More
50.18.9.15.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm
dia 6 Kgf/cm2 - External work - Exposed on wall
12
-
-
... More
50.18.9.16.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm
dia 6Kgf/cm2 - External work - Exposed on wall
8
-
-
... More
50.18.9.22.1
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 110 mm dia Elbow
10
-
-
... More
50.18.9.22.2
Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow
10
-
-
... More
50.18.9.22.3
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement-110 mm dia Door Elbow.
7
-
-
... More
50.18.9.22.5
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes
including jointing with PVC solvent cement 110x110x110 mm dia Tee
10
-
-
... More
50.17.1.4
Supplying and fixing CP Health faucet good quality including cost of materials and
labour charges etc. complete as per the direction of site engineer-in-charge.
7
-
-
... More
50.18.8.3.1
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work, including cutting chases and making good the wall etc. 25 mm pipe
12 kgf/cm2
100
-
-
... More
50.18.8.4.1
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work, including cutting chases and making good the wall etc. 32 mm pipe
10Kgf/cm2
60
-
-
... More
50.18.8.5.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work, including cutting chases and making good the wall etc. 40 mm pipe
6Kgf/cm2
40
-
-
... More
50.18.8.6.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work, including cutting chases and making good the wall etc. 50 mm pipe
6 kgf/cm2
180
-
-
... More
50.18.9.7.1
Providing and fixing PVC pipes includings of pipes with one step PVC solvent
cement, trenching refilling & testing of joints complete as per direction of Engineer in
Charge. 63 mm dia 6Kgf/cm2
15
-
-
... More
50.18.9.9.1
Providing and fixing PVC pipes includings jointing of pipes with one step PVC
solvent cement, trenching, refilling & testing of Joints complete as per direction of
engineer in charge.110 mm dia 6Kgf/cm2
70
-
-
... More
18.18.3
Providing and fixing ball valve (brass) of approved quality, High or low pressure,
with plastic floats complete:25 mm nominal bore
2
-
-
... More
17.28.1.2
Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC.
waste fittings complete.
Semi rigid pipe40 mm dia
12
-
-
... More
18.19.2.1
Providing and fixing gun metal non-return valve of approved quality (screwed end):
32 mm nominal boreHorizontal
2
-
-
... More
18.19.2.2
Providing and fixing gun metal non-return valve of approved quality (screwed end):
32 mm nominal boreVertical
2
-
-
... More
18.48
Providing and placing on terrace (at all floor levels) polyethylene water storage tank
:ISI 12701 marked, with cover and suitable locking arrangement and making
necessary holes for inlet, outlet and overflow pipes but without fittings and the base
support for tank.
4000
-
-
... More
OD32591/2023-2024
Polyethylene water storage tank with cover and suitable locking arrangement for rain
water harvesting
4000
-
-
... More
OD35677/2023-2024
OD- providing and fixing wall mounted vertical self cleaning rain water harvesting
filter of HDPE filter housing with SS-304 filter element of maximum flow rate 120
liters per minute including the cost of carriage and fixing as specified as per the
direction of engineer in charge.
1
-
-
... More
23.1.1.1
Boring / drilling bore well of required dia for casing / strainer pipe, by suitable
method prescribed in IS: 2800 ( part I), including collecting samples from different
strata, preparing and submitting strata chart/ bore log, including hire & running
charges of all equipments, tools plants & machineries required for the job, all
complete as per direction of Engineer - in- Charge, upto 90 metre depth below ground level.
All types of soil300 mm dia
80
-
-
... More
23.3.3
Supplying, assembling, lowering and fixing in vertical position in bore well,
unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS :
12818, including required hire and labour charges, fittings & accessories etc. all
complete, for all depths, as per direction of Engineer- in- Charge.200 mm nominal
size dia
80
-
-
... More
12.41.2
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes
conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :
5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm
diameter
120
-
-
... More
OD31437/2023-2024
Supply and installation of 160mm dia pipe including all accessorries and fittings of
approved IS make etc complete as per design ,drawing and the direction of Engineerat-
site External drainage pipe
50
-
-
... More
OD31438/2023-2024
Supply and fixing of 110mm dia pipe including all accessorries and fittings of
approved IS make etc complete as per design ,drawing and the direction of Engineerat-
site
External drainage pipe
80
-
-
... More
OD31439/2023-2024
Providing , supply and fixing Open well submersible pump-1.5HP including all
fittings
and accessories of approved IS make etc complete as per design and drawings
1
-
-
... More
OD31440/2023-2024
Providing , supply and fixing Borewell Submersible Pump-1.5HP water cooling with
6mm dia ss rope including all fittings and accessories of approved IS make etc.
complete as per design and
drawings
1
-
-
... More
OD32588/2023-2024
Providing , supply and fixing Y STAINER- 50mm dia including all fittings and
accessories of approved IS make etc complete as per design and drawings
1
-
-
... More
OD31445/2023-2024
Providing , supply and fixing Booster Pump- 1.5HP including all fittings and
accessories of approved IS make etc complete as per design and drawings
1
-
-
... More
OD27588/2023-2024
Supplying Stainless steel insulated fish box and trolley of size 60x50x75+90 cm with
400mm square tube frame work 20 SWG thick stainless steel sheet of 304 grade top
and bottom shelf, teak wood chopping board of 60mm thick etc complete as per
drawing and instructions of engineer in charge.
12
-
-
... More
OD27587/2023-2024
Supplying Stainless steel insulated display trolley of size 120x70x75+90 cm with
400mm square tube frame work 20 SWG thick stainless steel sheet of 304 grade 4mm
thick transparent openable cover at top and fixed wall at sides above the middle shelf,
stainless steel sides below the middle shelf, insulating the sides of top display cabin
provision for SS zinc grating, liquid collection tray etc complete as per drawing and instructions of engineer in charge.
10
-
-
... More
OD27586/2023-2024
Supplying Stainless steel insulated display trolley of size 140x70x75+90 cm with
400mm square tube
frame work 20 SWG thick stainless steel sheet of 304 grade 4mm thick transparent
openable cover at top
and fixed wall at sides above the middle shelf, stainless steel sides below the middle
shelf, insulating the
sides of top display cabin provision for SS zinc grating, liquid collection tray etc
complete as per drawing
and instructions of engineer in charge
8
-
-
... More
OD27585/2023-2024
Supplying Stainless steel insulated display trolley of size 180x70x75+90 cm with
400mm square tube frame work 20 SWG thick stainless steel sheet of 304 grade 4mm
thick transparent openable cover at top and fixed wall at sides above the middle shelf,
stainless steel sides below the middle shelf, insulating the sides of top display cabin
provision for grating, liquid collection tray etc complete as per drawing and
instructions of engineer in charge.
3
-
-
... More
13.71
Lettering with black Japan pint of approved brand and manufacture
5000
-
-
... More
OD31469/2023-2024
Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and
prepolished, machine cut Granite slab for project information, of required size,
approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white 2cement, mixed with matching
pigment, epoxy touch ups, including rubbing, curing complete at all levels.
<br>Area of slab over 0.50 sqm
2
-
-
... More
16.21
Engraving letters in hard stone
1500
-
-
... More
16.91.2
Providing and laying factory made chamfered edge Cement Concrete paver blocks
in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,
thickness & size/ shape, made by table vibratory method using PU mould, laid in
required colour & pattern over 50mm thick compacted bed of sand, compacting and
proper embedding/laying of inter locking paver blocks into the sand bedding layer
through vibratory compaction by using plate vibrator, filling the joints with sand and
cutting of paver blocks as per required size and pattern, finishing and sweeping
extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C.
paver block of M-30 grade with approved color design and pattern.
810
-
-
... More
10.17
Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape
with hooked ends in R.C.C. slabs or beams during laying, including painting the
exposed portion of loop, all as per standard design complete.
14
-
-
... More
OD31446/2023-2024
Providing and fixing computerised numerical control cut letters using 18 mm thick
multi wood for name board of fish market including all materials as per direction of
engineer in charge etc.
complete
8.64
-
-
... More
Appendix B Electrification Wiring and accessories
-
-
-
... More
1.10.1
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm
FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC
conduit,
with modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FRLS
PVC insulated copper conductor single core cable etc as required.Group A
109
-
-
... More
1.10.3
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm
FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC
conduit,
with modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C
28
-
-
... More
1.17.3
Supplying and drawing following sizes of FRLS PVC insulated copper conductor,
single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X
1.5 sq.mm
622
-
-
... More
1.17.12
Supplying and drawing following sizes of FRLS PVC insulated copper conductor,
single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x
2.5 sq. mm
120
-
-
... More
1.17.21
Supplying and drawing following sizes of FRLS PVC insulated copper conductor,
single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x
4 sq. mm
115
-
-
... More
1.21.1
Supplying and fixing of following sizes of medium class PVC conduit along with
accessories in surface/ recess including cutting the wall and making good the same in
case of recessed conduit as required.20 mm
627.6
-
-
... More
1.21.2
Supplying and fixing of following sizes of medium class PVC conduit along with
accessories in surface/ recess including cutting the wall and making good the same in
case of recessed conduit as required.25 mm
40
-
-
... More
1.24.3
Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as
required.15/16 amp switch
3
-
-
... More
1.24.5
Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as required.6
pin 15/16 amp socket outlet
3
-
-
... More
1.26
Supplying and fixing modular blanking plate on the existing modular plate & switch
box excluding modular plate as required.
25
-
-
... More
1.27.2
Supplying and fixing following size/ modules, GI box alongwith modular base &
cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)
3
-
-
... More
1.56
Supplying and fixing suitable size Gl box with modular plate and cover in front on
surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket
outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light
plugs to be used in non residential buildings).
22
-
-
... More
1.58
Supplying and fixing PVC batten/ angle holder including connection etc. as required.
8
-
-
... More
90.4.2
Supply and installation of suitable size MS belt type fan clamp fabricated from flat
iron 40 x 6 mm, 150mm long x 2 Nos with M.S. rod bent to shape, neatly painted
with 2 coats of enamel paint over a coat of red oxide primer as per IS 732 as required.
22
-
-
... More
1.31
Supplying and fixing suitable size GI box with modular plate and cover in front on
surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket
outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be
used in non residential buildings).
21
-
-
... More
MCB, DB and RCCB
-
-
-
... More
2.3.2
Supplying and fixing following way, single pole and neutral, sheet steel, MCB
distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar,
neutral bus bar, earth bar, din bar, interconnections, powder painted including
earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door
13
-
-
... More
2.10.1
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature
circuit breaker suitable for inductive load of following poles in the existing MCB DB
complete with connections, testing and commissioning etc. as required.Single pole
70
-
-
... More
2.10.2
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature
circuit breaker suitable for inductive load of following poles in the existing MCB DB
complete with connections, testing and commissioning etc. as required.Single pole
and netural
12
-
-
... More
2.11
Supplying and fixing single pole blanking plate in the existing MCB DB complete
etc. as required.
25
-
-
... More
2.12.1
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing
MCB DB complete with connections, testing and commissioning etc. as required.40
amps
13
-
-
... More
2.13.1
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing
MCB DB complete with connections, testing and commissioning etc. as required.40
amps
1
-
-
... More
2.14.1
Supplying and fixing following rating, double pole, (single phase and neutral), 240
volts, residual
current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in
the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps
13
-
-
... More
2.15.2
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts,
residual
current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in
the existing MCB DB complete with connections, testing and commissioning etc. as
required.40 amps
1
-
-
... More
2.16
Supplying and fixing DP sheet steel enclosure on surface/ recess along with
25/32amps 240 volts "C" curve DP MCB complete with connections, testing and
commissioning etc. as required.
1
-
-
... More
2.21
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with
inscription in single red colour on front side as required.
1
-
-
... More
90.11.1.11 Supply and installation of sheet steel, phosphatised and painted, dust and vermin
proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus
and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable
anchor bolts or fixed in recess including cutting hole on the wall , making good the
damages, colour washing etc. as required6 way (8+18) - three phase double cover (IP
42/43)
1
-
-
... More
2.18
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2
pole and earth,metal enclosed plug top along with 20 amps "C" curve, SP, MCB, in
sheet steel enclosure, on surface or in recess, with chained metal cover for the socket
out let and complete with connections, testing and commissioning etc. as required.
2
-
-
... More
2.2.1
Providing and fixing following rating and breaking capacity and pole MCCB in
existing cubicle panel board including drilling holes in cubicle panel, making
connections, etc. as required.100 Amp, 16 KA, TPMCCB
1
-
-
... More
OD25885/2023-2024
Supply, Installation, testing and commissioning of 40 A to 63 A, MCB (C
curve), 10 kA breaking capacity Three pole/four pole with reputed brands.
1
-
-
... More
Earthing
-
-
-
... More
5.4
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including
accessories, and providing masonry enclosure with cover plate having locking
arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as
required.
3
-
-
... More
5.14
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for
connections etc. as required.
18
-
-
... More
90.16.1.3
Supply and drawing bare earthing conductors of the following sizes along with
wiring/ cables and giving connection as required3.15 mm copper conductor ( 10
SWG)
280
-
-
... More
90.16.5.3
Supply of superior quality copper earth socket for the following size of earth
conductor including crimping etc. as required.3.15 mm (10 SWG)
66
-
-
... More
90.16.3.1
Supply and clamping the following size of strips on surface of wall/ parapet/ existing
cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty
GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages,
colour washing etc. as required ( for horizontal run)20 x 3 mm GI strip
200
-
-
... More
Cable and Termination
-
-
-
... More
9.1.2
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.2 X 10 sq. mm (19mm)
28
-
-
... More
9.1.33
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.4 X 16 sq. mm (28mm)
2
-
-
... More
90.12.5.3
Supply & laying of one number PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/
HUME / STONE WARE/ GI/ DWC pipe as required.2 core 10 sq mm
125
-
-
... More
90.12.6.41
Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium
power cable of 1.1 KV grade of the following sizes in the existing masonry open duct
as required.4 core 16 sq mm
16
-
-
... More
90.12.7.3
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.2 core 10 sq mm with factory made clamp
56
-
-
... More
90.12.7.41
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp
7
-
-
... More
90.12.10.2
Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including
excavation50/38 mm or nearest size
125
-
-
... More
OD25890/2023-2024
Supply and installation of 4 sqmm to 16 sqmm. 60 mm long x 12 mm wide x 1 mm
thick Copper earthing clips (or approximate size) for single compression glands and
giving all
connections.
32
-
-
... More
90.12.6.3
Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium
power cable of 1.1 KV grade of the following sizes in the existing masonry open duct
as required.2 core 10 sq mm
302
-
-
... More
Panel Board
-
-
-
... More
90.14.1.2
Fabrication, supply, conveyance, installation testing and commissioning of floor or
wall mounting, dust and vermin proof, cubicle type MV panel board comprising of
the following components/ devices & complying to IS 8623.
Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly
as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved
design and requirement, with front and rear access facility, bus bar chambers, hinged
doors for all switch gear compartments, earthing the doors using 4 sq mm braided
copper conductor, providing necessary cut-outs for mounting meters, relays,
indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber
and cable alley, powder coating the assembly after subjecting to 7 tank process etc as
required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles
etc shall not be used for the fabrication of panel assembly. The measurments will be
taken the area of the complete sheets used for panel board including partitions,
folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA
sheet, powder coated (excluding base frame)
14
-
-
... More
90.14.2.1
Supply and providing 2mm SMC sheet as shrouding for bus interconnection /
terminations etc. including required nut & bolt etc.
2
-
-
... More
90.14.3.2
Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU'
section rubber beeding suitable for 1.60/ 2.00 mm sheet
60
-
-
... More
90.14.4
Supply and fabrication conveyance and installation of base frame of panel board
using 75 x 40 mm rolled steel channel (ISMC)
10
-
-
... More
90.14.5
Supply and fabrication conveyance and installation of angle iron frame work for wall
mounting panel board
10
-
-
... More
90.14.6
Supply and providing copper bus bars including finger type SMC bus bar supports in
the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as
required.
2280
-
-
... More
90.14.7
Supply and providing copper earth bus in the panel board
387
-
-
... More
Safety Equipment
-
-
-
... More
OD25718/2023-2024
Providing and Fixing of Electrical ISI Grade Rubber Mat suitable for
440Volts Switchboards.
1
-
-
... More
OD25719/2023-2024
Supply and installation of fire bucket with stand.
2
-
-
... More
OD25720/2023-2024
S/F DCP fire extinguisher (5Kg): supply and installation of 5kg Dry chemical
power type (DCP) fire extinguishers having ISI mark along with mounting supports
etc.as required.
2
-
-
... More
OD25721/2023-2024
Supply and providing Cable Route Marker
10
-
-
... More
Fittings
-
-
-
... More
90.15.4.2
Supply Conveyance, installation, testing and commissioning of 36/40W LED street
light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip
make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal
surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated
housing,acrylic cover complete with THD less than 10%, power factor greater than
0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver
compartment should be seperatly accessible for maintenance (LM 79&80 certificates
from NABL accredited Third party lab to be produced mentioning chip manufacturer)
9
-
-
... More
90.15.4.7
Supply Conveyance, installation, testing and commissioning of 100W LED Flood
light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip
make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal
surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,
acrylic cover complete with THD less than 10%, power factor greater than 0.98,
RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment
should be seperatly accessible for maintenance (LM 79&80 certificates from NABL
accredited Third party lab to be produced mentioning chip manufacturer)
2
-
-
... More
OD25704/2023-2024
Supply installation testing and commissioning of Environmental friendly, energy saving long life corrosion resistant, vertical surface mounting pressure die-cast aluminum housing (light engine) well glass
luminaries with high power LED as light source ( 40 W STUPEWGP40WLED STUPE WELL GLASS OF
Havells)or approved make hanging light.
14
-
-
... More
OD25705/2023-2024
Supply, installation, testing and commissioning of LED Bulk head light with IP 63
protection. (Reputed brand or Brand approved by the site engineer)
7
-
-
... More
OD25706/2023-2024
Supply, installation, testing and commisioning of following sweep ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper condutor, single core cable etc. as required. (a) 1200 mm sweep ceiling fan with stepped type electronic fan regulator (Reputed brands or Brand approved by the site engineer)
22
-
-
... More
1.50.1
Installation of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required.Upto 450 mm sweep
9
-
-
... More
1.49
Numbering of ceiling fan / exhaust fan/ fluorescent fittings as required.
125
-
-
... More
OD25906/2023-2024
Supply, installation, testing and commissioning of exhaust fan in the existing opening
making good damage, connection, testing, commissioning etc. as required. (a) 230
mm metal body (Make:- reputed brands or brand approved by the site engineer- light
duty)
8
-
-
... More
OD25906/2023-2024
Supply, installation, testing and commissioning of exhaust fan in the existing opening
making good damage, connection, testing, commissioning etc. as required. (a) 230
mm metal body (Make:- reputed brands or brand approved by the site engineer- light
duty)
9
-
-
... More
90.3.19.3
Supply conveyance, installation, testing and commissioning the light fittings of
following types made from CRCA sheet 0.5mm thickness with all accessories and
lamps directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated
and sheathed round copper conductor flex wire or extending the original wiring and
giving connections as required1200 mm 1X20W LED Lamp with box type fixture
54
-
-
... More
Others
-
-
-
... More
OD25722/2023-2024
Supply and fixing of ferrules on wire for circuit identification, as required (Any
make approved by CPWD/KPWD/KSCADC) for 1.5, 2.5, 4 and 6sqmm wire.
300
-
-
... More
OD25887/2023-2024
Charge for creating proper identification marks on the DB, TPN DB, VDB and panel
board. as per the standards of KEI,KSEB,KSCADC
28
-
-
... More
OD25888/2023-2024
Supply and fixing of connector bar (including connection of wires 1 to 2.5 sqmm)
for loop circuit connections or as required in an establishment of circuit connection
(Any make approved by CPWD/KPWD/KSCADC) used for 1sqmm, 1.5 sqmm and
2.5 sqmm
100
-
-
... More
OD25889/2023-2024
Supply and fixing of connector bar (including connection of wires 4 to 10sqmm) for
loop circuit connections or as required in an establishment of circuit connection
(Any make approved by CPWD/KPWD/KSCADC) used for 4 sqmm to 10 sqmm
wire.
25
-
-
... More
2.21
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild
steel, at least 2 mm thick, and vitreous enameled white on both sides, and with
inscription in single red colour on front side as required.
1
-
-
... More
OD27692/2023-2024
Charges for KSEB Service connection paper charges (including the preparation of
completion report, drawings and other necessary papers like power allocation etc.) the
rate exclusive of all government free.
1
-
-
... More
1.33
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden
block including connection etc as required.
117
-
-
... More
1.40
Providing and fixing plain 16/0.20 mm (0.50 sqmm) twin circular flexible FRLS PVC
insulated, PVC sheathes copper cable direct on the wall with PVC clips etc as
required.
100
-
-
... More
1.48
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia,
heavy gauge including painting etc. as required. (Note : More than 5 cm length shall
be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
12
-
-
... More
1.49
Numbering of ceiling fan / exhaust fan/ fluorescent fittings as required.
125
-
-
... More
90.3.7
Supplying and providing extra steel chain (16 SWG) 2 x 1.00 m long with 16/0.20
mm 3 core copper conductor flex wire conforming to relevant ISS or with the
extended original wiring and giving connection etc. as required.
56
-
-
... More
OD27722/2023-2024
Supply and fixing the 25 A HRC fuse in the existing fuse base (Capsule type HRC)
12
-
-
... More
OD27723/2023-2024
Supply and fixing 32 A fuse base of non-hygroscopic backelite material type .
13
-
-
... More
OD27724/2023-2024
Supply, Installing 63A 2 way neutral connector bar in the existing panel board
13
-
-
... More
Cable Tray
-
-
-
... More
4.1.1
Supplying and installing following size of perforated pre-painted M.S. cable trays
with
perforation not more than 17.5%, in convenient sections, joined with connectors,
suspended from the ceiling with M.S. suspenders including bolts & nuts, painting
suspenders etc as required.100 mm width X 50 mm depth X 1.6 mm thickness
110
-
-
... More
4.2.1
Supplying and installing following size of perforated pre-painted M.S. cable trays
bends with
perforation not more than 17.5%,, joined with connectors, suspended from the ceiling
with M.S. suspenders including bolts & nuts, painting suspenders etc as required.100
mm width X 50 mm depth X 1.6 mm thickness
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%