Kerala State Coastal Area Development Corporation Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Kerala State Coastal Area Development Corporation Limited - KSCADC Tender
Civil And Construction
Civil Works Others
Building Construction
Security and Emergency Services
Electrical and Electronics
Electrical Works
Eprocure
Opening Date8 Nov 2024
Closing Date28 Nov 2024
Tender Amount₹ 37,57,71,790
Costs
EMD
₹ 5,00,000Document Cost
₹ 17,700Tender Fee
₹ 17,700
Summary
Pmmsy-construction Of State Of Art Wholesale Fish Market-aluva In Ernakulam, Kerala
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_SCADC_704169_1Bid Award Id
ViewTender No
ET-44/2024-25Tender Authority
Kerala State Coastal Area Development Corporation Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
OD31037/2024_2025 : Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of<br>grade M-25 of specified diameter and length below the pile cap to carry a safe<br>working load not less than specified, excluding the cost of steel reinforcement but<br>including the cost of boring, with bentonite solution and temporary casing of<br>appropriate length for setting out and removal of same and the length of the pile to be<br>embedded in the pile cap etc. all complete, including removal of excavated earth with<br>all lifts and leads (Length of pile for payment shall be measured upto bottom of pile<br>cap).900 mm dia piles
609
-
-
... More
OD31038/2024_2025 : Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M25 of specified diameter and length below the pile cap to carry a safe working load not less than<br>specified, excluding the cost of steel reinforcement but including the cost of boring, with<br>bentonite solution and temporary casing of appropriate length for setting out and removal of<br>same and the length of the pile to be embedded in the pile cap etc. all complete, including<br>removal of excavated earth with all lifts and leads (Length of pile for payment shall be<br>measured upto bottom of pile cap).800 mm dia piles
4364.5
-
-
... More
OD31039/2024_2025 : Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M25 of specified diameter and length below the pile cap to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap).700 mm dia piles
974.4
-
-
... More
5.34.1 : Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable/ recoverable separately.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum).
3287.49
-
-
... More
5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
190000
-
-
... More
20.6.1.1 : Vertical load testing of piles in accordance with IS 2911( Part IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of engineer -in-Charge.Single pile upto 50 tonne capacityInitial test
4
-
-
... More
20.6.1.2 : Vertical load testing of piles in accordance with IS 2911( Part IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of engineer -in-Charge.Single pile upto 50 tonne capacityRoutine test
4
-
-
... More
Appendix B: Earthwork and PCC
-
-
-
... More
2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
10394.49
-
-
... More
2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil
4291.78
-
-
... More
OD25420/2024_2025 : Providing Z steel sheet pile of size 400x185x7.5/8.5 driving down vertically in lines and levels,<br>interlocking with adjacent piles with suitable pile driving unit and all accessories including all<br>labour hire charges etc ,complete as per the direction of departmental officers.
1
-
-
... More
2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
9579.99
-
-
... More
2.27 : Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming consolidating and dressing complete.
109.13
-
-
... More
23.7 : Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer-in-charge.
21.6
-
-
... More
2.34.1 : Supplying chemical emulsion in sealed containers including delivery as specified.Chlorpyriphos / Lindane emulsifiable concentrate of 20%
589.5
-
-
... More
2.35.1.1 : Diluting and injecting chemical emulsion for POST -CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion):Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:With Chlorpyriphos /Lindane E.C. 20% with 1% concentration
345
-
-
... More
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
764.84
-
-
... More
4.2.3 : Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
264.93
-
-
... More
Appendix C: RCC works
-
-
-
... More
5.33.1 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level
2484.32
-
-
... More
5.33.2 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level
4056.46
-
-
... More
5.34.1 : Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable/ recoverable separately.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum).
2535.31
-
-
... More
5.34.2 : Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable/ recoverable separately.Providing M-35 grade concrete instead of M-25 grade BMC/RMC. (Note: Cement content considered in M-35 is @ 350 Kg/cum).
3484.43
-
-
... More
5.34.3 : Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable/ recoverable separately.Providing M-40 grade concrete instead of M-25 grade BMC/RMC.(Note : Cement
content considered in M-40 is @ 360 kg/cum).
672.09
-
-
... More
5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
217377.75
-
-
... More
5.31 : Extra for laying reinforced cement concrete in or under water and /or liquid mud including cost of pumping or bailling out water and removing slush etc., complete.
Note:- The quantity will be calculated by multiplying the depth measured from the subsoil water level upto the centre of gravity of the R.C.C. under subsoil water with the quantity of R.C.C. in cubic metre executed under subsoil water. The depth of centre of gravity shall be reconed correct to 0.1m. 0.05 m or more shall be taken as 0.1 and less than 0.05 m ignored. No extra payment shall be made for placing reinforcement or centering & shuttering under subsoil water conditions.
108.33
-
-
... More
5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
607280.3
-
-
... More
Appendix D: Shuttering
-
-
-
... More
5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
1331.82
-
-
... More
5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
13140.49
-
-
... More
5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
10733.67
-
-
... More
5.9.21 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof
ply 12 mm thick.
10114.22
-
-
... More
5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
5381.16
-
-
... More
5.9.7 : Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases)
448.97
-
-
... More
5.9.19 : Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges
96.83
-
-
... More
5.9.16.1 : Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide
312.64
-
-
... More
5.11.1 : Extra additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.5m, for every additional height of 1 metre or part thereof (Plan area to be measured).Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
7117.57
-
-
... More
5.28 : Providing and fixing in position 12 mm thick bitumen impregnated fibre board conforming to IS: 1838, including cost of primer, sealing compound in expansion joints.
230.25
-
-
... More
5.29.2.2 : Providing and fixing sheet covering over expansion joints with iron screws as per design.200 mm wide
35
-
-
... More
22.4.1 : Providing and Placing in position suitable PVC water stops conforming to IS : 12200 for construction / expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete:Serrated with central bulb ( 225 mm wide, 8-11 mm thick)
458.1
-
-
... More
Appendix E: Solid Block Masonry
-
-
-
... More
50.6.3.1 : Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth for 10 cm thick wall in CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding etc complete
179.27
-
-
... More
50.6.3.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete
6.25
-
-
... More
50.6.1.8 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 15cm in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.
882.19
-
-
... More
6.38 : Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above floor 2 level up to floorV level in cement mortar 1:4 (1 cement :4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.
15.8
-
-
... More
6.3.1 : Brick work with common burnt clay machine moulded perforated bricks of classdesignation 12.5 conforming to IS: 2222 in superstructure above plinth level up tofloor five level in cement mortar 1:6 (1 cement : 6 coarse sand):With F.P.S. ( non modular ) bricks
58.25
-
-
... More
6.15 : Extra for providing and placing in position 2 Nos 6 mm dia M.S bars at every third course of half brick masonry.
198.2
-
-
... More
19.33 : Constructing soak pit 1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
17.28
-
-
... More
OD31517/2024_2025 : Honey-comb brick work with 10/11.4 cm thick with common burnt clay F.P.S. (non modular)<br>bricks of class designation 7.5 including grouting with cement mortar 1:6 (1 cement : 6 fine<br>sand). for foundation and plinth
6.47
-
-
... More
Appendix F: Roofing works
-
-
-
... More
50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
52271.46
-
-
... More
50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
17568.36
-
-
... More
13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
2169.67
-
-
... More
OD25408/2024_2025 : Providing and fixing MS Trellis work, consisting of epoxy finished MS frame work , using<br>RHS 96x48x4 for vertical and horizontal supports and fixing weived stainless steel mesh (make<br>mesh tech or equivalent ) having wire thickness of 1mm with a weft 1.69mm and warp 1.509<br>mm and supported by frame with , all fixing arrangements etc. complete.
49.93
-
-
... More
OD25409/2024_2025 : Providing and fixing Name board fixing epoxy finished MS frame work , using RHS 96x48x4<br>for vertical and horizondal supports and fixing weived stainless steel mesh make (mesh tech or<br>equivalent )having wire thickness of 1mm with a weft 1.69mm and warp 1.509 mm and<br>supported by frame , all fixing arrangements etc. complete
89.49
-
-
... More
OD25411/2024_2025 : Providing and fixing Aluminium Tile profile sheets (Oralium - Novatile , size, shape and pitch<br>of corrugation as approved by Engineer-in-charge) 0.560 mm or nearest available thickness.<br>The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM<br>seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of<br>purlins, rafters and trusses and including cutting to size and shape wherever required.
2198.05
-
-
... More
OD25412/2024_2025 : Providing and fixing of Pre-coated colour or mill finish Aluminium Roofing Accessories in<br>0.71 mm thickness ,Alloy 31500 (IS designation) [Aluminium Alloy (AA) 3004 (ISO<br>designation)] For color, coating shall be 5-7 microns epoxy primer on both sides of the sheet<br>and polyester top coat 15-18 microns, using self drilling/ tapping SS screws of size 6 x 50mm<br>with 3mm thick EPDM seal and SS plain washer complete :Precoated/mill finish aluminium<br>Ridges plain<br>(500- 600mm)
225
-
-
... More
OD25413/2024_2025 : Providing and fixing of Pre-coated colour or mill finish Aluminium Roofing Accessories in<br>0.71 mm thickness ,Alloy 31500 (IS designation) [Aluminium Alloy (AA) 3004 (ISO<br>designation)] For color, coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/ tapping SS screws of size 6 x 50mm<br>with 3mm thick EPDM seal and SS plain washer complete :Precoated/mill finish aluminium<br>Barge board<br>(Upto 200 mm)
350
-
-
... More
OD25414/2024_2025 : Providing and fixing of Pre-coated colour or mill finish Aluminium Roofing Accessories in<br>0.71 mm thickness ,Alloy 31500 (IS designation) [Aluminium Alloy (AA) 3004 (ISO<br>designation)] For color, coating shall be 5-7 microns epoxy primer on both sides of the sheet<br>and polyester top coat 15-18 microns, using self drilling/ tapping SS screws of size 6 x 50mm<br>with 3mm thick EPDM seal and SS plain washer complete :Precoated/mill finish aluminium<br>Flashings/ Aprons<br>(Upto 600 mm)
20
-
-
... More
OD25415/2024_2025 : Providing and fixing of Pre-coated colour or mill finish Aluminium Roofing Accessories in<br>0.71 mm thickness ,Alloy 31500 (IS designation) [Aluminium Alloy (AA) 3004 (ISO<br>designation)] For color, coating shall be 5-7 microns epoxy primer on both sides of the sheet<br>and polyester top coat 15-18 microns, using self drilling/ tapping SS screws of size 6 x 50mm<br>with 3mm thick EPDM seal and SS plain washer complete : 600mm overall girth Roof gutter
50
-
-
... More
OD25416/2024_2025 : Supplying and fixing 18mm thick colured Multi layer Polycarbonate Panels of<br>(SUNPAL® – PALRAM make or equivalent ) of size 1000 mm width x 11800mm<br>length.The panel shall have fire rating as per rating as per EN13501 B,s1,d0.The polycarbonate<br>system shall have weight not less than 3.11 kgs/m2.and a U value <= 1.5<br>watts/m2/°C.The whole system shall be secured with Aluminium end profile using Tfasteners of thickness not less than 2mm having minimum three points for fastening with selfdrilling Hex Headwith EPDM seal. Screws to have proper fixing with the existing structural<br>framework which is fabricated in accordance to the requirement.
880
-
-
... More
OD25417/2024_2025 : Under deck Insulation on Roof sheet using Cross linked PE Sheet One side foil<br>(Sliplop)13mm X 1.25 mtr X 25mtr .Unroll the INSUshield insulation from the ridge to eave<br>end that means from higher level to lower and the foil must face toward the roofing<br>sheet.Stretch and fix the INSUshield insulation sheet with self drilling screw on ridge end and<br>eave end so that the saggy is not visible between the purlins.Put the metal roofing sheet and<br>screw as usual .Place the next roll of INSUshield alongside the earlier roll side by<br>side.Complete the entire roof by repeating this process.
908.33
-
-
... More
OD25418/2024_2025 : Supplying and fixing Stainless steel rain chain gutter 100mm OD with 2mm thick chain for<br>roof down water with necessary fittings etc complete<br>
40
-
-
... More
OD25419/2024_2025 : Providing leak proof on roof sheet to wall joints using 1mm thick aluminium sheet inserted in<br>wall and sealed properly as per the direction of Engineer in charge<br>
25
-
-
... More
Plastering
-
-
-
... More
13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
21988.3
-
-
... More
13.11 : 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 ( 1 cement : 6 fine sand).
4354.02
-
-
... More
13.22 : Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.
1395.43
-
-
... More
50.13.1 : 9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete
2939
-
-
... More
5.30 : Add for plaster drip course / groove in plastered surface or moulding to R.C.C. projections.
497
-
-
... More
OD31830/2024-2025 Providing Plaster art of required pattern , applying 18mm thick two coat plastering and<br>providing plaster art on required pattern etc as per design<br>
1
-
-
... More
13.7.1 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)
4979.92
-
-
... More
OD31831/2024-2025 Providing and fixing Fibre mesh in the joints of concrete and brick masonry, electrical and<br>plumbing conduits chasing area etc. wherever necessary racked and grouted /pointed on joints ,<br>covered by 150mm wide fibre net fixing before plastering . Cost including all materials &<br>labour charges all lead and lift scaffolding curing etc. complete for walls.
2535.28
-
-
... More
22.5 : Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
1
-
-
... More
22.16 : Providing and laying in situ five course water proofing treatment with APP (Atactic
Polypropylene) modified Polymeric memberane over roof consisting of first coat
of bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of bonding material @
1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming
to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0
mm thick of 3.00 Kg/ sqm weight consisting of five layers prefabricated with centre
core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix
and the polymeric mix is protected on both side with 20 micron HMHDPE film.
5th, the top most layer shall be finished with brick tiles of class designation 10
grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral
water proofing compound by weight of cement over a 12 mm layer of cement
mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles
shall be paid for separately).
3864.75
-
-
... More
22.23.1 : Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin- charge. The product performance shall carry guarantee for 10 years against any leakage.For vertical surface two coats @0.70 kg per sqm
1094.92
-
-
... More
22.23.2 : Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin- charge. The product performance shall carry guarantee for 10 years against any leakage.For horizontal surface one coat @1.10 kg per sqm.
4818.62
-
-
... More
Flooring
-
-
-
... More
11.5 : 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufactures specification. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
1
-
-
... More
OD31832/2024-2025 (Ref: 11.26.1)Kota stone (prepolished) slab flooring of size 600x600mm over 20 mm ( average)<br>thick base laid over and providing 3mm spacer gap on both direction and filling epoxy approved<br>by Engineer-in-charge, including rubbing and polishing complete with base of cement mortar<br>1:4 (1 cement : 4 coarse sand)25 mm thick
3486.44
-
-
... More
OD31833/2024-2025 (Ref: 11.26.1)Kota lapotra finish stone slab flooring of size 600x600mm over 20 mm ( average)<br>thick base laid over and providing 3mm spacer gap on both direction and filling epoxy approved<br>by Engineer-in-charge, including rubbing and polishing complete with base of cement mortar<br>1:4 (1 cement : 4 coarse sand)25 mm thick
1
-
-
... More
OD31835/2024-2025 (Ref: 11.32)Extra for Kota lapotra finish stone / sand stone in treads of steps and risers using<br>single length up to 1.20 metre.
528.42
-
-
... More
OD31836/2024-2025 (Ref: 7.37.1.1 & 7.38.1.1)Stone work (machine cut edges veneer work) for wall lining upto<br>10 m height,with special adhesive over 12 mm thick cement mortar 1:3 (1 Cement :3 coarse<br>sand), providing 3mm spacer gap on both direction and joined with cement mortar 1:2<br>(1cement:2 stone dust), including rubbing and polishing complete. (To be secured to the<br>backing and the sides by means of cramps and pins which shall be paid for separately<br>Kota lapotra finish stone slabs exposed face dressed and rubbed.25 mm thick
1
-
-
... More
11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
1
-
-
... More
OD33194/2024-2025 (Ref: 11.49.3)Providing and laying Vitrified tiles in walls with different sizes (thickness to be<br>specified by the manufacturer), with water absorption less than 0.08% and conforming to IS :<br>15622, of approved brand & manufacturer, in all colours and shade, laid with cement based<br>high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in<br>average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made<br>separately).Size of Tile 800x800 mm<br>
583.74
-
-
... More
Joineries
-
-
-
... More
21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
907.8
-
-
... More
21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)
1169.8
-
-
... More
21.3.2 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness
18.65
-
-
... More
OD31840/2024-2025 (Ref: 21.3.3)Providing and fixing glazing in aluminium door, window, ventilator shutters and<br>partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural<br>drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be<br>paid in basic item): With Toughened glass 12 mm thickness.
71.4
-
-
... More
10.29.2 : Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides
54.33
-
-
... More
OD31841/2024-2025 (Ref: 21.3.2)Providing and fixing glazing in aluminium door, window, ventilator shutters and<br>partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural<br>drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be<br>paid in basic item):With 6 mm thick clear heat strengthened glass<br>
23.82
-
-
... More
21.2.1 : Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
35.38
-
-
... More
OD31844/2024-2025 (Ref: 10.31)Supplying and fixing MS Grill doors using MS angle 35x35x5mm for door frame ,<br>25x25x4mm for shutter frame and 12mm square rod @ 100mmC/C for shutter as per approved<br>design and drawing . The rate shall include all materials, labour and hire charges for fabrication,<br>all hardware , fixtures and applying one coat epoxy primer etc. complete as directed by<br>Engineer in charge.
7.74
-
-
... More
9.48.2 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc
332.88
-
-
... More
10.6.1 : Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover
1049.9
-
-
... More
10.8.2 : Extra for providing mechanical device chain and crank operation for operating rolling shuttersExceeding 16.80 sqm in area
1049.9
-
-
... More
10.9 : Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer -in-Charges, (area of grill to be measured).
15.12
-
-
... More
OD31845/2024-2025 Door frame fixing with anchor bolt - Supplying, drilling/cleaning hole and fixing appropriate<br>length of ETA Approved HRD H 10 anchor suitable for fastenings both on concrete &<br>masonry/aerated blocks. Length of anchor should be decided on the basis of embedment depth<br>in base material, total frame thickness & gap between frame and base material. Anchor<br>comprises of 10 mm diameter Polyamide PA 6 grade sleeve and of 7 mm diameter double<br>threaded 6.8 grade Hex head double threaded screw made of carbon steel galvanized to<br>minimum 5 microns. Fixing methodology to be followed as per manufacturers guidelines.<br>
121
-
-
... More
OD31846/2024-2025 Providing and fixing tiled false ceiling of 8mm PVC laminated gypsum board Tile of size<br>595x595 mm ( Gyproc Gyprex due d rop or equivalent) in reveal edge , true horizontal level,<br>suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized<br>@120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably<br>spaced joints to get required length and of size 24x32mm made from 0.30 mm thick (minimum)<br>sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of<br>0.30mm thick (minimum) sheet, 1200mm long spaced between main "T" at 600<br>mm center to center to form a grid of 1200x600 mm and secondary cross "T" of<br>length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked<br>at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size<br>24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required<br>cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke<br>detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats<br>of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 8mm dia and 45 mm long dash fasteners, 4<br>mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at<br>1200 mm center to center along main T, bottom exposed width of 24mm of all T-sections shall<br>be pre-painted with polyester paint, all complete for all heights as per specifications, drawings<br>and as directed by<br>Engineer-in-charge.
397.67
-
-
... More
PAINTING
-
-
-
... More
13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
4302.46
-
-
... More
13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
1240.61
-
-
... More
13.47.1 : Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
8206.6
-
-
... More
13.83.2 : Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.Two coats
1240.61
-
-
... More
13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
5033.16
-
-
... More
13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
5050.08
-
-
... More
OD31827/2024-2025<br>(Ref: 13.52.1)Finishing with PU paint (two or more coats) at all locations prepared and applied<br>as per manufacturer's specifications including appropriate priming coat, preparation of<br>surface, etc. complete. On steel work
135.43
-
-
... More
OD31828/2024-2025<br>Supplying and fixing rubber corner safe guard 120cm height of size 100x100x30mm with<br>60mm reflective tape 8nos of size fixed on parking area column corners.
484.8
-
-
... More
16.48.1 : Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint conforming to IS: 164, on bituminous surface in white / yellow shade, including cleaning the surface of all dirt, scales oil, grease and foreign material etc. complete.New work (Two or more coats)
119.3
-
-
... More
Water Supply and Sanitary Installation
-
-
-
... More
17.2.1
Providing and fixing white vitreous china pedestal type water closet (European type
W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including
flush pipe, with manually controlled device (handle lever), conforming to IS : 7231,
with all fittings and fixtures complete, including cutting and making good the walls
and floors wherever required:W.C. pan with ISI marked white solid plastic seat and
lid
18
-
-
... More
17.1.1
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm
Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including
flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with
all fittings and fixtures complete, including cutting and making good the walls and
floors wherever require:White Vitreous china Orissa pattern W.C. pan of size
580x440 mm with integral type foot rests
2
-
-
... More
17.7.1
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32
mm C.P. brass waste of standard pattern, including painting of fittings and brackets,
cutting and making good the walls wherever require:White Vitreous China Wash
basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
9
-
-
... More
17.8
Providing and fixing white vitreous china pedestal for wash basin completely
recessed at the back for the reception of pipes and fittings.
2
-
-
... More
17.5.1
Providing and fixing white vitreous china flat back half stall urinal of size
580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard
size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with
waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P.
brass, including painting of fittings and cutting and making good the walls and floors
wherever required:Single half stall urinal with 5 litre PVC. automatic flushing cistern
12
-
-
... More
8.10.2 Providing and fixing stone slab with table rubbed, edges rounded and polished, of size
75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of
appropriate width with chase cutter and embedding the stone in the chase with epoxy
grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 6 mm nominal size) as per direction of Engineer-in Charge and finished
smooth.Granite Stone of approved shade
10
-
-
... More
17.73.2
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats
with CP brass screws with concealed fitting arrangement of approved quality and
colour600 mm long towel rail with total length of 645 mm, width 78 mm and
effective height of 88 mm, weighting not less than 190 gms
20
-
-
... More
17.72
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide
with minimum distances of 37 mm from wall face with concealed fittings
arrangement of approved quality and colour, weighing not less than 88 gms
2
-
-
... More
50.17.1.4
Supplying and fixing CP Health faucet good quality including cost of materials and
labour charges etc. complete as per the direction of site engineer-in-charge
20
-
-
... More
18.51.1
Providing and fixing C.P. brass long body bib cock of approved quality conforming to
IS standards and weighing not less than 690 gms.15 mm nominal bore
15
-
-
... More
17.10.1.3
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983
with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and
brackets, cutting and making good the walls wherever required:
Kitchen sink with drain board510x1040 mm bowl depth 200 mm
2
-
-
... More
17.10.2.2
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983
with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and
brackets, cutting and making good the walls wherever required:
Kitchen sink without drain board610x460 mm bowl depth 200 mm
2
-
-
... More
OD26430/2024-2025
Supplying & Fixing sink mixer cock for sink by making good the walls
wherever required.with accessories like teflon tape ,shellac, waste and silicone
sealant. (based on 18.49.1)
2
-
-
... More
OD26431/2024-2025
Supplying & Fixing sink cock for sink by making good the walls wherever
required.with accessories like teflon tape ,shellac, waste and silicone sealant. (based on 18.49.1)
2
-
-
... More
18.52.1
Providing and fixing C.P brass stop cock ( concealed) of standard design and of
approved make conforming to IS: 893115 mm nominal bore
5
-
-
... More
18.22.2
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:150 mm diameter
1
-
-
... More
18.53.1
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of
approved quality conforming to IS: 893115 mm nominal bore
9
-
-
... More
17.34.1
Providing and fixing toilet paper holder:C.P. brass
4
-
-
... More
OD25421/2024-2025
Providing and Fixing Wall mounted stainless steel Grab bar 600mm long with anti
slip
coating including the cost of carriage and fixing as specified as per the direction of
engineer in charge
2
-
-
... More
17.70.1
Providing and fixing PTMT Bottle Trap for Wash basin and sink.Bottle trap 31 mm
single piece moulded with height of 270 mm, effective length of tail pipe 260 mm
from the center of the waste coupling, 77 mm breadth with 25 mm minimum water
seal, weighing not less than 260 gms
11
-
-
... More
OD26434/2024-2025
Supplying & Fixing electrically operated horizontal storage heater with M.S.
steel glass lined vessel with 1.5-2 Kw heating element, auto-thermostatic switch, neon
indicator lamp, pressure relief valve etc. as specified in the specifications, complete in
all respects
2
-
-
... More
Internal Drainage
-
-
-
... More
OD26453/2024-2025 Supplying, Installing & Testing at site in position uPVC pipe (SWR) of Type B
(IS:13592) including injection moulded fittings with bosses where required eg tees,
bends, clamps couplings and adapters & clamping with Universal clamps,
Anchor fastners(8mm), Threaded Rod(8mm), nuts, washers etc complete.and jointing
with adhesive approved by manufactures including cutting and making good the walls
or surface mounted with clamps as required at site 160mm pipe (based on 50.18.8.9.2)
30
-
-
... More
OD26454/2024-2025
Supplying, Installing & Testing at site in position uPVC pipe (SWR) of Type B
(IS:13592) including injection moulded fittings with bosses where required eg tees,
bends, clamps couplings and adapters & clamping with Universal clamps,
Anchor fastners(8mm), Threaded Rod(8mm), nuts, washers etc complete. and jointing
with adhesive approved by manufactures including cutting and making good the walls
or surface mounted with clamps as required at site 110 mm pipe (based on 50.18.8.9.2)
300
-
-
... More
OD26452/2024-2025
Supplying, Installing & Testing at site in position uPVC pipe (SWR) of Type B
(IS:13592) including injection moulded fittings with bosses where required eg tees,
bends, clamps couplings and adapters & clamping with Universal clamps,
Anchor fastners(8mm), Threaded Rod(8mm), nuts, washers etc complete. and jointing
with adhesive approved by manufactures including cutting and making good the walls
or surface mounted with clamps as required at site 75 mm pipe (based on 50.18.8.8.2)
100
-
-
... More
OD26451/2024-2025
Supplying, Installing & Testing at site in position uPVC pipe (SWR) of Type B
(IS:13592) including injection moulded fittings with bosses where required eg tees,
bends, clamps couplings and adapters & clamping with Universal clamps,
Anchor fastners(8mm), Threaded Rod(8mm), nuts, washers etc complete. and jointing
with adhesive approved by manufactures including cutting and making good the walls
or surface mounted with clamps as required at site 50 mm pipe (based on 50.18.8.8.2)
225
-
-
... More
OD31029/2024-2025
Supplying, Installing & Testing at site in position uPVC pipe (SWR) of Type
B(IS:13592 upto 200 mm dia and IS:4985 for above 200 mm dia pipes) including
SWR fittings with bosses where required eg.tees, bends, clamps, couplings and
adapters and cowls with sealing grooves and clamping with Position & jointing
with 'O' rings including cutting and making good the walls and floors as
required at site (For Vertical Shaft piping). 200 mm (based on 50.18.9.19.2)
5
-
-
... More
OD31030/2024-2025
Supplying, Installing & Testing at site in position uPVC pipe (SWR) of Type
B(IS:13592 upto 160 mm dia and IS:4985 for above 160 mm dia pipes) including
SWR fittings with bosses where required eg.tees, bends, clamps, couplings and
adapters and cowls with sealing grooves and clamping with Position & jointing
with 'O' rings including cutting and making good the walls and floors as
required at site (For Vertical Shaft piping). 160 mm (based on 50.18.9.19.2)
100
-
-
... More
OD31031/2024-2025
Supplying, Installing & Testing at site in position uPVC pipe (SWR) of Type
B(IS:13592 upto 110 mm dia and IS:4985 for above 110 mm dia pipes) including
SWR fittings with bosses where required eg.tees, bends, clamps, couplings and
adapters and cowls with sealing grooves and clamping with Position & jointing
with 'O' rings including cutting and making good the walls and floors as
required at site (For Vertical Shaft piping). 110 mm (based on 50.18.9.19.2)
30
-
-
... More
OD31028/2024-2025
Supplying, Installing & Testing at site in position uPVC pipe (SWR) of Type
B(IS:13592 upto 75 mm dia and IS:4985 for above 75 mm dia pipes) including SWR
fittings with bosses where required eg.tees, bends, clamps, couplings and adapters and
cowls with sealing grooves and clamping with Position & jointing with
'O' rings including cutting and making good the walls and floors as
required at site (For Vertical Shaft piping). 75 mm (based on 50.18.9.19.2)
150
-
-
... More
OD31032/2024-2025
Supplying, Installing & Testing at site in position uPVC pipe (SWR) of Type
A(IS:13592 upto 160 mm dia and IS:4985 for above 160 mm dia pipes) including
SWR fittings with bosses where required eg.tees, bends, clamps, couplings and
adapters and cowls with sealing grooves and clamping with Position & jointing
with 'O' rings including cutting and making good the walls and floors as
required at site (For vent and rainwater pipes ). 160 mm pipe (based on 50.18.9.19.2)
100
-
-
... More
OD31033/2024-2025
Supplying, Installing & Testing at site in position uPVC pipe (SWR) of Type
A(IS:13592 upto 110 mm dia and IS:4985 for above 110 mm dia pipes) including
SWR fittings with bosses where required eg.tees, bends, clamps, couplings and
adapters and cowls with sealing grooves and clamping with Position & jointing
with 'O' rings including cutting and making good the walls and floors as
required at site (For vent and rainwater pipes ). 110 mm pipe (based on 50.18.9.19.2)
50
-
-
... More
OD31191/2024-2025
Supplying, Installing & Testing at site in position uPVC pipe (SWR) of Type
A(IS:13592 upto 75 mm dia and IS:4985 for above 75 mm dia pipes) including SWR
fittings with bosses where required eg.tees, bends, clamps, couplings and adapters and
cowls with sealing grooves and clamping with Position & jointing with
'O' rings including cutting and making good the walls and floors as
required at site (For vent and rainwater pipes ). 75 mm pipe (based on 50.18.9.19.2)
25
-
-
... More
OD31193/2024-2025
Supplying, Installing & Testing at site in position uPVC pipe (SWR) of Type
A(IS:13592 upto 63 mm dia and IS:4985 for above63 mm dia pipes) including SWR
fittings with bosses where required eg.tees, bends, clamps, couplings and adapters and cowls with sealing grooves and clamping with Position & jointing with
'O' rings including cutting and making good the walls and floors as
required at site (For vent and rainwater pipes ). 63 mm pipe (based on 50.18.9.19.2)
35
-
-
... More
OD31197/2024-2025
Supplying, Installing & Testing at site in position uPVC Deep seal Floor trap (ht
7") supporting on G.I. slotted rails (1.6 mm thick), Full threaded rod , Anchor
Fasteners etc at site. 110 X 75mm dia out let (Multiple Floor Trap)
20
-
-
... More
OD31203/2024-2025
Supplying, Installing, Testing & Commissioning at site in position 110mm dia
deep seal PVC 'P' trap without boss tee and access cap Including all
necessary fittings & supports complete
19
-
-
... More
OD31205/2024-2025
Supplying, Installing, Testing & Commissioning at site in position 110mm dia
deep seal PVC 'P' trap without boss tee and access cap Including all
necessary fittings & supports complete
2
-
-
... More
OD26625/2024-2025
Supplying, Installing & Testing at site in position low noise 3 layered Poly
Propylene pipes & push fit fittings(PP) of sound level 13 dB @ 4L/sec for non
pressurized domestic drainage in accordance with system standards of DIN 4102, the
density of the pipe & fittings material should be 1.9 g/cm3 including cutting and
making good the walls and floors as required at site (For Vertical & Horizontal
Shaft piping of Kitchen Waste). 160 mm dia
50
-
-
... More
OD26626/2024-2025
Supplying, Installing & Testing at site in position low noise 3 layered Poly
Propylene pipes & push fit fittings(PP) of sound level 13 dB @ 4L/sec for non
pressurized domestic drainage in accordance with system standards of DIN 4102, the
density of the pipe & fittings material should be 1.9 g/cm3 including cutting and
making good the walls and floors as required at site (For Vertical & Horizontal
Shaft piping of Kitchen Waste). 110 mm dia
30
-
-
... More
OD26627/2024-2025
Supplying, Installing & Testing at site in position low noise 3 layered Poly
Propylene pipes & push fit fittings(PP) of sound level 13 dB @ 4L/sec for non
pressurized domestic drainage in accordance with system standards of DIN 4102, the
density of the pipe & fittings material should be 1.9 g/cm3 including cutting and
making good the walls and floors as required
25
-
-
... More
OD26628/2024-2025 Supplying, Installing & Testing at site in position low noise 3 layered Poly
Propylene pipes & push fit fittings(PP) of sound level 13 dB @ 4L/sec for non
pressurized domestic drainage in accordance with system standards of DIN 4102, the
density of the pipe & fittings material should be 1.9 g/cm3 including cutting and
making good the walls and floors as required at site (For Vertical & Horizontal
Shaft piping of Kitchen Waste). 50 mm dia
25
-
-
... More
OD26629/2024-2025
Supplying, Installing & Testing at site in position Polypropylene P Trap (sound
level 13 dB @ 4L/sec) of size 110 mm dia of approved make for Drainage, complete
with all necessary fittings of approved make, as per drawings
8
-
-
... More
OD31210/2024-2025
Supplying, Installing & Testing at site in position Deep seal Polypropylene Floor
trap (ht 7") (sound level 13 dB @ 4L/sec) supporting on G.I. slotted rails (1.6
mm thick), Full threaded rod , Anchor Fasteners etc at site.110 X 75mm dia out let
(Multiple Floor Trap)
3
-
-
... More
OD31213/2024-2025
Supplying, Installing & Testing at site in position Polypropylene Rodding eye
(sound level 13 dB @ 4L/sec) supporting on G.I. slotted rails (1.6 mm thick), Full
threaded rod , Anchor Fasteners etc at site.
110 mm dia
3
-
-
... More
OD31241/2024-2025
Supplying, Installing & Testing at site in position Polypropylene Rodding eye
(sound level 13 dB @ 4L/sec) supporting on G.I. slotted rails (1.6 mm thick), Full
threaded rod , Anchor Fasteners etc at site.
75mm dia
2
-
-
... More
OD26550/2024-2025
Installing at site in position Floor Drain Lock type (SS304) of 1.2 mm thick. 125 x
125mm Square
50
-
-
... More
OD26555/2024-2025
Supplying & Installing at site in position SS (SS 316) Drain Trough With
Grating of following size having silt basket fits inside gratings frame to trap debris
and particles . 300 X 300 mm
50
-
-
... More
OD26556/2024-2025
Supplying & Installing at site in position SS (SS 316) Drain Trough With
Grating of following size having silt basket fits inside gratings frame to trap debris
and particles . 1000 X 300 mm
5
-
-
... More
OD31249/2024-2025
Supplying, Installing & Testing at site in position PVC Rodding Eye (6 kg/cm2)
complete in all respects. 160 mm dia
30
-
-
... More
OD31248/2024-2025
Supplying, Installing & Testing at site in position PVC Rodding Eye (6 kg/cm2)
complete in all respects. 110 mm dia
5
-
-
... More
OD31247/2024-2025
Supplying, Installing & Testing at site in position PVC Rodding Eye (6 kg/cm2)
complete in all respects. 75 mm dia
5
-
-
... More
OD31259/2024-2025
Supplying & Installing at site in position 125 X 125 mm square cast SS (304
grade) cleanout with Teflon gasket & SS key for opening, complete in all
respects
10
-
-
... More
Water Supply
-
-
-
... More
OD31275/2024-2025
Supplying, Installing & Testing at site in position uPVC unthreaded pipes (As
per ASTM D - 1785 ,Sch.40) of approved make for water supply, complete with all
necessary Sch-40 Fittings (elbows, unions, tees, reducers, couplings, nipples etc.)
complete with clamping in position with G.I. "U" bolts (8 mm thick) on
G.I. slotted rails (1.6 mm thick) , Rail legs (2.5 mm thick) or with split clamps of
approved make 20mm dia pipe
150
-
-
... More
OD31277/2024-2025
Supplying, Installing & Testing at site in position uPVC unthreaded pipes (As
per ASTM D - 1785 ,Sch.40) of approved make for water supply, complete with all
necessary Sch-40 Fittings (elbows, unions, tees, reducers, couplings, nipples etc.)
complete with clamping in position with G.I. "U" bolts (8 mm thick) on
G.I. slotted rails (1.6 mm thick) , Rail legs (2.5 mm thick) or with split clamps of
approved make as per drawings 25 mm pipe ( based on 18.7.3)
100
-
-
... More
OD31278/2024-2025
Supplying, Installing & Testing at site in position uPVC unthreaded pipes (As
per ASTM D - 1785 ,Sch.40) of approved make for water supply, complete with all
necessary Sch-40 Fittings (elbows, unions, tees, reducers, couplings, nipples etc.)
complete with clamping in position with G.I. "U" bolts (8 mm thick) on
G.I. slotted rails (1.6 mm thick) , Rail legs (2.5 mm thick) or with split clamps of
approved make as per drawings 32mm dia uPVC pipe (based on 18.7.4)
75
-
-
... More
OD31279/2024-2025
Supplying, Installing & Testing at site in position uPVC unthreaded pipes (As
per ASTM D - 1785 ,Sch.40) of approved make for water supply, complete with all
necessary Sch-40 Fittings (elbows, unions, tees, reducers, couplings, nipples etc.)
complete with clamping in position with G.I. "U" bolts (8 mm thick) on
G.I. slotted rails (1.6 mm thick) , Rail legs (2.5 mm thick) or with split clamps of
approved make as per drawings 40mm dia uPVC pipe (based on 18.7.5)
50
-
-
... More
OD31309/2024-2025
Supplying, Installing & Testing at site in position uPVC unthreaded pipes (As
per ASTM D - 1785 ,Sch.40) of approved make for water supply, complete with all
necessary Sch-40 Fittings (elbows, unions, tees, reducers, couplings, nipples etc.)
complete with clamping in position with G.I. "U" bolts (8 mm thick) on
G.I. slotted rails (1.6 mm thick) , Rail legs (2.5 mm thick) or with split clamps of
approved make as per drawings 50mm uPVC pipe (based on 18.7.6)
100
-
-
... More
OD31311/2024-2025
Supplying, Installing & Testing at site in position uPVC unthreaded pipes (As
per ASTM D - 1785 ,Sch.40) of approved make for water supply, complete with all
necessary Sch-40 Fittings (elbows, unions, tees, reducers, couplings, nipples etc.)
complete with clamping in position with G.I. "U" bolts (8 mm thick) on
G.I. slotted rails (1.6 mm thick) , Rail legs (2.5 mm thick) or with split clamps of
approved make 63mm uPVC pipe (based on 18.7.6)
100
-
-
... More
OD31315/2024-2025
Supplying, Installing & Testing at site in position uPVC unthreaded pipes (As
per ASTM D - 1785 ,Sch.40) of approved make for water supply, complete with all
necessary Sch-40 Fittings (elbows, unions, tees, reducers, couplings, nipples etc.)
complete with clamping in position with G.I. "U" bolts (8 mm thick) on
G.I. slotted rails (1.6 mm thick) , Rail legs (2.5 mm thick) or with split clamps of
approved make 80mm uPVC pipe (based on 18.7.6)
10
-
-
... More
OD31319/2024-2025
Supplying, Installing & Testing at site in position uPVC unthreaded pipes (As
per ASTM D - 1785 ,Sch.40) of approved make for water supply, complete with all
necessary Sch-40 Fittings (elbows, unions, tees, reducers, couplings, nipples etc.)
complete for Sch 40 pipes concealing through the walls / floors including cutting and
making good the wall to line and level wherever required as per drawings 20 mm
uPVC pipes ( based on 18.8.2)
100
-
-
... More
OD31320/2024-2025
Supplying, Installing & Testing at site in position uPVC unthreaded pipes (As
per ASTM D - 1785 ,Sch.40) of approved make for water supply, complete with all
necessary Sch-40 Fittings (elbows, unions, tees, reducers, couplings, nipples etc.) for Sch 40 pipes concealing through the walls / floors including cutting and making good
the wall to line and level wherever required as per drawings 25 mm uPVC pipe
(based on 18.8.3)
50
-
-
... More
OD31329/2024-2025
Supplying, Installing & Testing at site in position uPVC unthreaded pipes (As
per ASTM D - 1785 ,Sch.40, for reclaimed water-purple colour) of approved make
for water supply, complete with all necessary Sch-40 Fittings (elbows, unions, tees,
reducers, couplings, nipples etc.) complete with clamping in position with G.I.
"U" bolts (8 mm thick) on G.I. slotted rails (1.6 mm thick) , Rail legs (2.5
mm thick) or with split clamps of approved make as per drawings to the satisfaction
of the Project Manager.(For flush water supply only) 80 mm (based on 18.3.6)
25
-
-
... More
OD31330/2024-2025
Supplying, Installing & Testing at site in position uPVC unthreaded pipes (As
per ASTM D - 1785 ,Sch.40, for reclaimed water-purple colour) of approved make
for water supply, complete with all necessary Sch-40 Fittings (elbows, unions, tees,
reducers, couplings, nipples etc.) complete with clamping in position with G.I.
"U" bolts (8 mm thick) on G.I. slotted rails (1.6 mm thick) , Rail legs (2.5
mm thick) or with split clamps of approved make as per drawings to the satisfaction
of the Project Manager.(For flush water supply only) 65 mm (based on 18.3.6)
20
-
-
... More
OD31331/2024-2025
Supplying, Installing & Testing at site in position uPVC unthreaded pipes (As
per ASTM D - 1785 ,Sch.40, for reclaimed water-purple colour) of approved make
for water supply, complete with all necessary Sch-40 Fittings (elbows, unions, tees,
reducers, couplings, nipples etc.) complete with clamping in position with G.I.
"U" bolts (8 mm thick) on G.I. slotted rails (1.6 mm thick) , Rail legs (2.5
mm thick) or with split clamps of approved make as per drawings to the satisfaction
of the Project Manager.(For flush water supply only) 50 mm (based on 18.3.4)
500
-
-
... More
OD31332/2024-2025
Supplying, Installing & Testing at site in position uPVC unthreaded pipes (As
per ASTM D - 1785 ,Sch.40, for reclaimed water-purple colour) of approved make
for water supply, complete with all necessary Sch-40 Fittings (elbows, unions, tees,
reducers, couplings, nipples etc.) complete with clamping in position with G.I.
"U" bolts (8 mm thick) on G.I. slotted rails (1.6 mm thick) , Rail legs (2.5
mm thick) or with split clamps of approved make as per drawings to the satisfaction
of the Project Manager.(For flush water supply only) 40 mm (based on 18.3.4)
50
-
-
... More
OD31333/2024-2025
Supplying, Installing & Testing at site in position uPVC unthreaded pipes (As
per ASTM D - 1785 ,Sch.40, for reclaimed water-purple colour) of approved make
for water supply, complete with all necessary Sch-40 Fittings (elbows, unions, tees,
reducers, couplings, nipples etc.) complete with clamping in position with G.I.
"U" bolts (8 mm thick) on G.I. slotted rails (1.6 mm thick) , Rail legs (2.5 mm thick) or with split clamps of approved make as per drawings to the satisfaction
of the Project Manager.(For flush water supply only) 32 mm (based on 18.3.4)
25
-
-
... More
OD31334/2024-2025
Supplying, Installing & Testing at site in position uPVC unthreaded pipes (As
per ASTM D - 1785 ,Sch.40, for reclaimed water-purple colour) of approved make
for water supply, complete with all necessary Sch-40 Fittings (elbows, unions, tees,
reducers, couplings, nipples etc.) complete with clamping in position with G.I.
"U" bolts (8 mm thick) on G.I. slotted rails (1.6 mm thick) , Rail legs (2.5
mm thick) or with split clamps of approved make as per drawings to the satisfaction
of the Project Manager.(For flush water supply only) 25 mm (based on 18.3.2)
25
-
-
... More
OD31335/2024-2025
Supplying, Installing & Testing at site in position uPVC unthreaded pipes (As
per ASTM D - 1785 ,Sch.40, for reclaimed water-purple colour) of approved make
for water supply, complete with all necessary Sch-40 Fittings (elbows, unions, tees,
reducers, couplings, nipples etc.) complete with clamping in position with G.I.
"U" bolts (8 mm thick) on G.I. slotted rails (1.6 mm thick) , Rail legs (2.5
mm thick) or with split clamps of approved make as per drawings to the satisfaction
of the Project Manager.(For flush water supply only) 20 mm (based on 18.3.2)
50
-
-
... More
OD25591/2024-2025
Supplying, Installing & Testing at site in position full way lever operated Forged
Brass Ball valve of brass body with forged brass hard chrome plate (PN 25) of
approved make with necessary Male Adapter (Brass Threads) fittings in position as
per drawings. 15mm dia valve
4
-
-
... More
OD25590/2024-2025
Supplying, Installing & Testing at site in position full way lever operated Forged
Brass Ball valve of brass body with forged brass hard chrome plate (PN 25) of
approved make with necessary Male Adapter (Brass Threads) fittings in position as
per drawings. 20mm dia valve (based on 18.17.1)
130
-
-
... More
OD25589/2024-2025
Supplying, Installing & Testing at site in position full way lever operated Forged
Brass Ball valve of brass body with forged brass hard chrome plate (PN 25) of
approved make with necessary Male Adapter (Brass Threads) fittings in position as
per drawings. 25 mm dia valve (based on 18.17.1)
10
-
-
... More
OD25588/2024-2025
Supplying, Installing & Testing at site in position full way lever operated Forged
Brass Ball valve of brass body with forged brass hard chrome plate (PN 25) of
approved make with necessary Male Adapter (Brass Threads) fittings in position as
per drawings. 32 mm valve
5
-
-
... More
OD25587/2024-2025
Supplying, Installing & Testing at site in position full way lever operated Forged
Brass Ball valve of brass body with forged brass hard chrome plate (PN 25) of
approved make with necessary Male Adapter (Brass Threads) fittings in position as
per drawings. 40mm valve (based on 18.17.3)
5
-
-
... More
OD25586/2024-2025
Supplying, Installing & Testing at site in position full way lever operated Forged
Brass Ball valve of brass body with forged brass hard chrome plate (PN 25) of
approved make with necessary Male Adapter (Brass Threads) fittings in position as
per drawings. 50mm valve (based on 18.17.4)
15
-
-
... More
OD25618/2024-2025
Supplying, Installing & Testing at site in position Butterfly valve (PN 16) wafer
type of approved make with necessary PVC flanges, gaskets, nuts and bolts etc
complete within position as per drawings.65 mm dia
6
-
-
... More
OD25617/2024-2025
Supplying, Installing & Testing at site in position Butterfly valve (PN 16) wafer
type of approved make with necessary PVC flanges, gaskets, nuts and bolts etc
complete within position as per drawings. Butterfly valve (PN 16) 80mm
2
-
-
... More
OD25616/2024-2025
Supplying, Installing & Testing at site in position Butterfly valve (PN 16) wafer
type of approved make with necessary PVC flanges, gaskets, nuts and bolts etc
complete within position as per drawings. 100 mm dia valve
2
-
-
... More
OD25615/2024-2025
Supplying, Installing & Testing at site in position Butterfly valve (PN 16) wafer
type of approved make with necessary PVC flanges, gaskets, nuts and bolts etc
complete within position as per drawings. 150 mm dia valve
4
-
-
... More
18.19.3.2
Providing and fixing gun metal non-return valve of approved quality (screwed end):
40 mm nominal boreVertical
2
-
-
... More
18.19.4.2
Providing and fixing gun metal non-return valve of approved quality (screwed end):
50 mm nominal boreVertical
4
-
-
... More
18.19.5.2
Providing and fixing gun metal non-return valve of approved quality (screwed end):
65 mm nominal boreVertical
4
-
-
... More
OD25678/2024-2025
Supplying, Installing & Testing at site in position spring loaded vertically
mounted brass Air Release Valves of approved quality and make on the top of the
vertical water supply pipes as per specification and drawings. 20 mm dia
2
-
-
... More
OD25679/2024-2025
Supply,Installation,Testing and Commisioning of C I Y-type stainer PN 10 with
drain plug, SS screen 304 complete in all respects.(For upto 50 mm dia Brass Y -type
stainer) 80mm
2
-
-
... More
OD25683/2024-2025
Supplying, Installing & Testing at site in position Brass Float valve (PN 14) of
approved make with PP float & nipple with brass threaded insert, brass back
nuts, piston and bolts etc complete in all respect 40 mm dia (based on 18.18.3)
1
-
-
... More
OD25711/2024-2025
Supplying, Installing, Testing & Commissioning at site in position IP 68 type
Static water meter based on ultrasonic technology to eliminate measuring deviations
caused by air pockets, suspended particles & sand. It should posss higher
performance than Class-D requirements complete.Device should be BMS
ompactable. 20mm
2
-
-
... More
OD25712/2024-2025
Supplying, Installing, Testing & Commissioning at site in position IP 68 type
Static water meter based on ultrasonic technology to eliminate measuring deviations
caused by air pockets, suspended particles & sand. It should posss higher
performance than Class-D requirements complete.Device should be BMS
ompactable. 50 mm
1
-
-
... More
External Sewerage and Storm Water Drain
-
-
-
... More
OD26574/2024-2025
Supplying, Installing & Testing of pipes and conveying to position; and jointing
to true lines and gradients, PVC pipe of IS 4985(6kg/cm2), jointing the pipe line as
per specification, testing the pipe line after installation to the specified hydrostatic test
pressure including Supplying, Supplying, Installing specials like bends, couplers,
sockets, connections etc. as per provisions of IS: 1742-1983 (Code of practice for
building drainage) complete.75 mm pipe (based on 50.18.9.19.2)
25
-
-
... More
OD26575/2024-2025
Supplying, Installing & Testing of pipes and conveying to position; and jointing
to true lines and gradients, PVC pipe of IS 4985(6kg/cm2), jointing the pipe line as
per specification, testing the pipe line after installation to the specified hydrostatic test
pressure including Supplying, Supplying, Installing specials like bends, couplers,
sockets, connections etc. as per provisions of IS: 1742-1983 (Code of practice for
building drainage) complete. 110mm pipe (based on 50.18.9.19.2)
20
-
-
... More
OD31349/2024-2025
Supplying, Installing & Testing of pipes and conveying to position; and jointing
to true lines and gradients, PVC pipe of IS 4985(6kg/cm2), jointing the pipe line as
per specification, testing the pipe line after installation to the specified hydrostatic test
pressure including Supplying, Supplying, Installing specials like bends, couplers,
sockets, connections etc. as per provisions of IS: 1742-1983 (Code of practice for
building drainage) complete. 160mm pipe (based on 50.18.9.19.2)
150
-
-
... More
OD26584/2024-2025
Supplying & Laying of uPVC unthreaded pipes (As per ASTM D - 1785
,Sch.40) of approved make for water supply, complete with all necessary Fittings
(elbows, unions, tees, reducers, couplings, nipples etc.) wherever necessary, and
conveying to position, cleaning, laying and jointing to true lines and gradients,
,jointing the pipe line as per specification, testing the pipe line after installation to the
specified hydrostatic test pressure etc. complete.(for external water supply) 20 mm
pipe (based on 50.18.9.12.1)
25
-
-
... More
OD26585/2024-2025
Supplying & Laying of uPVC unthreaded pipes (As per ASTM D - 1785
,Sch.40) of approved make for water supply, complete with all necessary Fittings
(elbows, unions, tees, reducers, couplings, nipples etc.) wherever necessary, and
conveying to position, cleaning, laying and jointing to true lines and gradients,
,jointing the pipe line as per specification, testing the pipe line after installation to the
specified hydrostatic test pressure etc. complete.(for external water supply) 25 mm
pipe (based on 50.18.9.12.1)
40
-
-
... More
OD26586/2024-2025
Supplying & Laying of uPVC unthreaded pipes (As per ASTM D - 1785
,Sch.40) of approved make for water supply, complete with all necessary Fittings
(elbows, unions, tees, reducers, couplings, nipples etc.) wherever necessary, and
conveying to position, cleaning, laying and jointing to true lines and gradients,
,jointing the pipe line as per specification, testing the pipe line after installation to the
specified hydrostatic test pressure etc. complete.(for external water supply) 32 mm
pipe (based on 50.18.9.12.1)
25
-
-
... More
OD26587/2024-2025
Supplying & Laying of uPVC unthreaded pipes (As per ASTM D - 1785, ,Sch.40) of approved make for water supply, complete with all necessary Fittings
(elbows, unions, tees, reducers, couplings, nipples etc.) wherever necessary, and
conveying to position, cleaning, laying and jointing to true lines and gradients,
,jointing the pipe line as per specification, testing the pipe line after installation to the
specified hydrostatic test pressure etc. complete.(for external water supply) 40 mm
pipe (based on 50.18.9.12.1)
25
-
-
... More
OD26588/2024-2025
Supplying & Laying of uPVC unthreaded pipes (As per ASTM D - 1785
,Sch.40) of approved make for water supply, complete with all necessary Fittings
(elbows, unions, tees, reducers, couplings, nipples etc.) wherever necessary, and
conveying to position, cleaning, laying and jointing to true lines and gradients,
,jointing the pipe line as per specification, testing the pipe line after installation to the
specified hydrostatic test press
25
-
-
... More
OD26589/2024-2025
Supplying & Laying of uPVC unthreaded pipes (As per ASTM D - 1785
,Sch.40) of approved make for water supply, complete with all necessary Fittings
(elbows, unions, tees, reducers, couplings, nipples etc.) wherever necessary, and
conveying to position, cleaning, laying and jointing to true lines and gradients,
,jointing the pipe line as per specification, testing the pipe line after installation to the
specified hydrostatic test pressure etc. complete.(for external water supply) 50 mm
pipe (based on 50.18.9.12.1)
50
-
-
... More
OD26618/2024-2025
Supplying, Installing & Testing at site in position uPVC unthreaded pipes (As
per ASTM D - 1785 ,Sch.40, for reclaimed water-purple colour) of approved make
for water supply, complete with all necessary Sch-40 Fittings (elbows, unions, tees,
reducers, couplings, nipples etc.) complete with clamping in position with G.I.
"U" bolts (8 mm thick) on G.I. slotted rails (1.6 mm thick) , Rail legs (2.5
mm thick) or with split clamps of approved make as per drawings to the satisfaction
of the Project Manager.(For flush water supply only) 20 mm (based on 18.3.2)
50
-
-
... More
OD26617/2024-2025
Supplying, Installing & Testing at site in position uPVC unthreaded pipes (As
per ASTM D - 1785 ,Sch.40, for reclaimed water-purple colour) of approved make
for water supply, complete with all necessary Sch-40 Fittings (elbows, unions, tees,
reducers, couplings, nipples etc.) complete with clamping in position with G.I.
"U" bolts (8 mm thick) on G.I. slotted rails (1.6 mm thick) , Rail legs (2.5
mm thick) or with split clamps of approved make as per drawings to the satisfaction
of the Project Manager.(For flush water supply only) 25 mm (based on 18.3.2)
25
-
-
... More
OD26616/2024-2025
Supplying, Installing & Testing at site in position uPVC unthreaded pipes (As
per ASTM D - 1785 ,Sch.40, for reclaimed water-purple colour) of approved make for water supply, complete with all necessary Sch-40 Fittings (elbows, unions, tees,
reducers, couplings, nipples etc.) complete with clamping in position with G.I.
"U" bolts (8 mm thick) on G.I. slotted rails (1.6 mm thick) , Rail legs (2.5
mm thick) or with split clamps of approved make as per drawings to the satisfaction
of the Project Manager.(For flush water supply only) 32 mm (based on 18.3.4)
25
-
-
... More
OD26615/2024-2025
Supplying, Installing & Testing at site in position uPVC unthreaded pipes (As
per ASTM D - 1785 ,Sch.40, for reclaimed water-purple colour) of approved make
for water supply, complete with all necessary Sch-40 Fittings (elbows, unions, tees,
reducers, couplings, nipples etc.) complete with clamping in position with G.I.
"U" bolts (8 mm thick) on G.I. slotted rails (1.6 mm thick) , Rail legs (2.5
mm thick) or with split clamps of approved make as per drawings to the satisfaction
of the Project Manager.(For flush water supply only) 40 mm (based on 18.3.4)
25
-
-
... More
OD26614/2024-2025
Supplying, Installing & Testing at site in position uPVC unthreaded pipes (As
per ASTM D - 1785 ,Sch.40, for reclaimed water-purple colour) of approved make
for water supply, complete with all necessary Sch-40 Fittings (elbows, unions, tees,
reducers, couplings, nipples etc.) complete with clamping in position with G.I.
"U" bolts (8 mm thick) on G.I. slotted rails (1.6 mm thick) , Rail legs (2.5
mm thick) or with split clamps of approved make as per drawings to the satisfaction
of the Project Manager.(For flush water supply only) 50 mm (based on 18.3.4)
100
-
-
... More
OD26613/2024-2025
Supplying, Installing & Testing at site in position uPVC unthreaded pipes (As
per ASTM D - 1785 ,Sch.40, for reclaimed water-purple colour) of approved make
for water supply, complete with all necessary Sch-40 Fittings (elbows, unions, tees,
reducers, couplings, nipples etc.) complete with clamping in position with G.I.
"U" bolts (8 mm thick) on G.I. slotted rails (1.6 mm thick) , Rail legs (2.5
mm thick) or with split clamps of approved make as per drawings to the satisfaction
of the Project Manager.(For flush water supply only) 65 mm (based on 18.3.6)
40
-
-
... More
OD26612/2024-2025
Supplying, Installing & Testing at site in position uPVC unthreaded pipes (As
per ASTM D - 1785 ,Sch.40, for reclaimed water-purple colour) of approved make
for water supply, complete with all necessary Sch-40 Fittings (elbows, unions, tees,
reducers, couplings, nipples etc.) complete with clamping in position with G.I.
"U" bolts (8 mm thick) on G.I. slotted rails (1.6 mm thick) , Rail legs (2.5
mm thick) or with split clamps of approved make as per drawings to the satisfaction
of the Project Manager.(For flush water supply only) 80 mm (based on 18.3.6)
10
-
-
... More
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means
in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,
within a lead of 50 m.All kinds of soil
100
-
-
... More
2.26.1
Extra for every additional lift 1.5 m or part there of in excavation / banking excavated
or stacked materials.All kinds of soil
50
-
-
... More
4.1.11
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:5:10 (1 cement : 5 fine
sand : 10 graded stone aggregate 40 mm nominal size)
20
-
-
... More
OD26603/2024-2025
80 X 80 cms (31" X 31") of approx ,upto 0.90 m depth, having 60 X 60
cms (24" X 24") self pigmented type double seal (air & water tight)
DI manhole cover and frame (EHD) with closed bottom (not thru & thru) lifting
key holes & load tested as per IS:1726 & BS EN:124. along with steps
inside the manhole.
10
-
-
... More
OD26604/2024-2025
120 X 90 cms (40" X 49") of approx 2.5 m depth, having 90 X 60 cms
(36" X 24") self pigmented type double seal (air & water tight) DI
manhole cover and frame (EHD) with closed bottom (not thru & thru) lifting key
holes & load tested as per IS:1726 & BS EN:124. along with steps inside
the manhole
5
-
-
... More
OD26605/2024-2025
150cm X 150cm manhole for above 2.5 m depth having 90 X 60 cms (36" X
24") self pigmented type double seal (air & water tight) DI manhole cover
and frame (EHD) with closed bottom (not thru & thru) lifting key holes &
load tested as per IS:1726 & BS EN:124.
1
-
-
... More
OD26606/2024-2025
120 X 90 cms of approx 1.5 m depth, self pigmented type double seal (air &
water tight) DI manhole cover and frame (EHD) with closed bottom (not thru &
thru) lifting key holes & load tested as per IS:1726 & BS EN:124.
2
-
-
... More
OD26607/2024-2025
Supplying, Installing & Testing at site in position best quality PVC gully trap of
size 160 X160 mm outlet embedded in plain cement concrete 1:4:8 (20mm metal),
all the above encased in a chamber of 300 X 300 mm built with 15 cm thick RCC
over a bed of CC 1:4:8 using 40mm size metal 100mm thick ,plastering with
CM1:3,13mm thick inside, outside, exposed top surfaces and internal and top exposed surface finished smooth with a floating coat of neat cement, providing and fixing DI
manhole cover and frame (MD) with closed bottom (not thru & thru) lifting key
holes & load tested as per IS:1726 & BS EN:124 fixing the frame in PCC
1:2:4 using 20mm stone metal including painting the frame and cover with 2 coats of
anticorrosive black bitumastic painting etc. complete all as specified and directed.
2
-
-
... More
OD26608/2024-2025
Supplying, Installing & Testing at site in position best quality PVC gully trap of
size 160 X160 mm outlet embedded in plain cement concrete 1:4:8 (20mm metal),
all the above encased in a chamber of 300 X 300 mm built with 15 cm thick RCC
over a bed of CC 1:4:8 using 40mm size metal 100mm thick ,plastering with
CM1:3,13mm thick inside, outside, exposed top surfaces and internal and top exposed
surface finished smooth with a floating coat of neat cement, providing and fixing DI
manhole cover and frame (MD) with closed bottom (not thru & thru) lifting key
holes & load tested as per IS:1726 & BS EN:124 fixing the frame in PCC
1:2:4 using 20mm stone metal including painting the frame and cover with 2 coats of
anticorrosive black bitumastic painting etc. complete all as specified and directed.
with self pigmented type double seal (air & water tight) DI manhole cover and
frame of size 450 X 450 mm weighing not less than MD.
6
-
-
... More
Miscellaneous items
-
-
-
... More
OD31648/2024-2025
Supplying, Installing & Testing at site in position Fabricated UPVC SCH 40
Puddle flanges in the underground and overhead water tanks as per the drawings.
150mm OD
2
-
-
... More
OD31647/2024-2025
Supplying, Installing & Testing at site in position Fabricated UPVC SCH 40
Puddle flanges in the underground and overhead water tanks as per the drawings.
100mm OD
2
-
-
... More
OD31646/2024-2025
Supplying, Installing & Testing at site in position Fabricated UPVC SCH 40
Puddle flanges in the underground and overhead water tanks as per the drawings.
80mm OD
4
-
-
... More
OD31645/2024-2025
Supplying, Installing & Testing at site in position Fabricated UPVC SCH 40
Puddle flanges in the underground and overhead water tanks as per the drawings.
65mm OD
6
-
-
... More
OD31644/2024-2025
Supplying, Installing & Testing at site in position Fabricated UPVC SCH 40 Puddle flanges in the underground and overhead water tanks as per the drawings.
50mm OD
10
-
-
... More
OD31643/2024-2025
Supplying, Installing & Testing at site in position Fabricated UPVC SCH 40
Puddle flanges in the underground and overhead water tanks as per the drawings.
40mm OD
4
-
-
... More
OD31642/2024-2025
Supplying, Installing & Testing at site in position Fabricated UPVC SCH 40
Puddle flanges in the underground and overhead water tanks as per the drawings.
32mm OD
6
-
-
... More
OD31655/2024-2025
Supplying, Installing & Testing at site in position uPVC pipe (IS:13592 &
IS 4985) including injection moulded fittings with bosses where required eg tees,
bends, clamps couplings and adapters & clamping with Universal clamps,
Anchor fastners(8mm), Threaded Rod(8mm), nuts, washers etc complete.and jointing
with adhesive approved by manufactures including cutting and making good the walls
or surface mounted with clamps as required at site (For AC Drain). 50 mm OD
(6kg/cm2)(For shaft)
75
-
-
... More
OD31656/2024-2025
Supplying, Installing & Testing at site in position uPVC pipe (IS:13592 &
IS 4985) including injection moulded fittings with bosses where required eg tees,
bends, clamps couplings and adapters & clamping with Universal clamps,
Anchor fastners(8mm), Threaded Rod(8mm), nuts, washers etc complete.and jointing
with adhesive approved by manufactures including cutting and making good the walls
or surface mounted with clamps as required at site (For AC Drain). 32 mm
OD(10kg/cm2)- for AC drain (For ceiling)
100
-
-
... More
OD31657/2024-2025
Supplying, Installing & Testing at site in position uPVC pipe (IS:13592 &
IS 4985) including injection moulded fittings with bosses where required eg tees,
bends, clamps couplings and adapters & clamping with Universal clamps,
Anchor fastners(8mm), Threaded Rod(8mm), nuts, washers etc complete.and jointing
with adhesive approved by manufactures including cutting and making good the walls
or surface mounted with clamps as required at site (For AC Drain). 50 mm OD
(10kg/cm2)- for FCU drain (For ceiling)
25
-
-
... More
OD31708/2024-2025
Supply, installation & testing of Thermal Insulation of condensate drain piping
using closed cell elastomeric nitrile rubber / closed cell cross linked polyethylene
foam having a density of 50 +/- 10 Kg/m3 and with built-in vapor barrier, etc having
9 mm thickness .50 mm dia pipes
50
-
-
... More
OD31709/2024-2025
Supply, installation & testing of Thermal Insulation of condensate drain piping
using closed cell elastomeric nitrile rubber / closed cell cross linked polyethylene
foam having a density of 50 +/- 10
100
-
-
... More
OD31716/2024-2025
Making holes in RCC beams, slabs floors etc, using core cutting machine, for laying
pipes with standard clearance and rendering the same in RCC M 20, including
nominal reinforcement wherever required, complete.The quoted rate shall also
include water proofing compound(Conbextra GP-2 / GP-10) for complete sealing the
same joints around the pipes for full depth etc including supply of all materials. RCC
slabs 32 mm thick
5
-
-
... More
OD31717/2024-2025
Making holes in RCC beams, slabs floors etc, using core cutting machine, for laying
pipes with standard clearance and rendering the same in RCC M 20, including
nominal reinforcement wherever required, complete.The quoted rate shall also
include water proofing compound(Conbextra GP-2 / GP-10) for complete sealing the
same joints around the pipes for full depth etc including supply of all materials. RCC
slabs 50 mm thick
10
-
-
... More
OD31718/2024-2025
Making holes in RCC beams, slabs floors etc, using core cutting machine, for laying
pipes with standard clearance and rendering the same in RCC M 20, including
nominal reinforcement wherever required, complete.The quoted rate shall also
include water proofing compound(Conbextra GP-2 / GP-10) for complete sealing the
same joints around the pipes for full depth etc including supply of all materials. RCC
slabs 63 mm thick
5
-
-
... More
OD31719/2024-2025
Making holes in RCC beams, slabs floors etc, using core cutting machine, for laying
pipes with standard clearance and rendering the same in RCC M 20, including
nominal reinforcement wherever required, complete.The quoted rate shall also
include water proofing compound(Conbextra GP-2 / GP-10) for complete sealing the
same joints around the pipes for full depth etc including supply of all materials. RCC
slabs 75 mm thick
5
-
-
... More
OD31720/2024-2025
Making holes in RCC beams, slabs floors etc, using core cutting machine, for laying
pipes with standard clearance and rendering the same in RCC M 20, including
nominal reinforcement wherever required, complete.The quoted rate shall also
include water proofing compound(Conbextra GP-2 / GP-10) for complete sealing the same joints around the pipes for full depth etc including supply of all materials. RCC
slabs 110 mm thick
5
-
-
... More
OD31736/2024-2025
Supplying, Installing, Testing & Commissioning at site in position DI man hole
load tested as per IS:1726 for under ground sump and over head tank. Load Bearing
Capacity 600x600mm -Heavy Duty for UGS (HD) FOR STP
5
-
-
... More
OD31737/2024-2025
Supplying, Installing, Testing & Commissioning at site in position DI man hole
load tested as per IS:1726 for under ground sump and over head tank. Load Bearing
Capacity 900x600mm -Heavy Duty for UGS (HD) FOR STP
5
-
-
... More
OD31738/2024-2025
Supplying, Installing, Testing & Commissioning at site in position DI man hole
load tested as per IS:1726 for under ground sump and over head tank. Load Bearing
Capacity 600x600mm -Heavy Duty for UGS (EHD)
3
-
-
... More
OD31739/2024-2025
Supplying, Installing, Testing & Commissioning at site in position DI man hole
load tested as per IS:1726 for under ground sump and over head tank. Load Bearing
Capacity 900x600mm -Heavy Duty for UGS (EHD)
3
-
-
... More
OD31740/2024-2025
Supplying, Installing, Testing & Commissioning at site in position DI man hole
load tested as per IS:1726 for under ground sump and over head tank. Load Bearing
Capacity 600x600mm -Light Duty for OHT (LD)
6
-
-
... More
OD31741/2024-2025
Supplying, Installing, Testing & Commissioning at site in position DI man hole
load tested as per IS:1726 for under ground sump and over head tank. Load Bearing
Capacity 600x600mm -Heavy Duty for UGS (EHD) COLLECTION PIT
6
-
-
... More
OD31742/2024-2025
Supplying, Installing, Testing & Commissioning at site in position micro
controller based automatic level controller system with inbuilt tuner, starter, level
controller, float switch, overload protection, cascading system, two pump control with
three phase, auto/manual mode, sensor for under ground sump and over head tank
complete in all respects. The quoted rate shall exclude the necessary AC and DC
wiring
2
-
-
... More
OD31743/2024-2025 Supply & Laying connecting of cat-6, UTP cable through 25mm ISI rigid PVC
conduit with medium grade and necessary fixing accessories as required for automatic
level controller system.
125
-
-
... More
OD31744/2024-2025
Supplying, Installing, Testing & Commissioning at site in position Water Saving
Aerators for common area wash basin
25
-
-
... More
OD31745/2024-2025
Supplying, Installing & Testing at site in position PDI certified Water Hammer
Arrestor with copper body,Polypropylene piston, Brass Threaded Adapter, EPDM
which is factory air charged and permanently sealed to operate on all plumbing lines
at 10Kgf/cm2 complete in all respect.20 mm dia
3
-
-
... More
OD31746/2024-2025
Supplying & Installing at site in position Roof Drain Doom model with CI body
and aluminium ring.160 mm dia outlet
7
-
-
... More
OD31747/2024-2025
Supplying & Installing at site in position Roof Drain Parapet model with CI
body and Aluminium Grate. 160 mm dia outlet
8
-
-
... More
OD31750/2024-2025
Supplying & Installing at site in position Roof Drain Parapet model with CI
body and Aluminium Grate. 160 mm dia outlet
50
-
-
... More
Point Wiring
-
-
-
... More
1.10.1
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm
FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC
conduit,
with modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FRLS
PVC insulated copper conductor single core cable etc as required.Group A
41
-
-
... More
1.10.2
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm
FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC
conduit,
with modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FRLS
PVC insulated copper conductor single core cable etc as required.Group B
61
-
-
... More
1.10.3
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm
FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC
conduit,
with modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FRLS
PVC insulated copper conductor single core cable etc as required.Group C
18
-
-
... More
1.11
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper
conductor single core cable in surface / recessed medium class PVC conduit, 2 way
modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
8
-
-
... More
1.55.1
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell
point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper
conductor single core cable in surface/ recessed PVC conduit, and earthing the point
with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group A
56
-
-
... More
1.55.2
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell
point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper
conductor single core cable in surface/ recessed PVC conduit, and earthing the point
with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as
required.Group B
55
-
-
... More
1.55.3
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell
point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper
conductor single core cable in surface/ recessed PVC conduit, and earthing the point
with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as
required.Group C
256
-
-
... More
1.17.3
Supplying and drawing following sizes of FRLS PVC insulated copper conductor,
single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X
1.5 sq.mm
2935
-
-
... More
1.17.12
Supplying and drawing following sizes of FRLS PVC insulated copper conductor,
single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x
2.5 sq. mm
2330
-
-
... More
1.17.21
Supplying and drawing following sizes of FRLS PVC insulated copper conductor,
single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x
4 sq. mm
1310
-
-
... More
1.21.1
Supplying and fixing of following sizes of medium class PVC conduit along with
accessories in surface/ recess including cutting the wall and making good the same in
case of recessed conduit as required.20 mm
2520
-
-
... More
1.21.2
Supplying and fixing of following sizes of medium class PVC conduit along with
accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
968
-
-
... More
1.24.1
Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as required.5/6
amps switch
28
-
-
... More
1.24.4
Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as required.3
pin 5/6 amp socket outlet
58
-
-
... More
1.26
Supplying and fixing modular blanking plate on the existing modular plate & switch
box excluding modular plate as required.
60
-
-
... More
1.27.2
Supplying and fixing following size/ modules, GI box alongwith modular base &
cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)
79
-
-
... More
1.24.3
Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as
required.15/16 amp switch
28
-
-
... More
1.24.5
Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as required.6
pin 15/16 amp socket outlet
28
-
-
... More
1.31
Supplying and fixing suitable size GI box with modular plate and cover in front on
surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket
outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be
used in non residential buildings).
12
-
-
... More
1.56
Supplying and fixing suitable size Gl box with modular plate and cover in front on
surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket
outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light
plugs to be used in non residential buildings)
3
-
-
... More
1.57
Supplying & fixing suitable size Gl box wih modular plate and cover in front on
surface or in recess including providing and fixing 25 A modular socket outlet and 25
A modular SP MCB, "C" curve including connections, painting etc. as required. lCD
33
-
-
... More
1.27.1
Supplying and fixing following size/ modules, GI box alongwith modular base &
cover plate for modular switches in recess etc as required.1 or 2 Module
(75mmX75mm)
30
-
-
... More
OD32138/2024-2025
Supply, Installation, Testing and Commissioning of 200A 4 pole ATS (Automatic
transfer switch) in the existing panel board with all control wiring with necessary
equipments
1
-
-
... More
OD32139/2024-2025
Supply, Installation, Testing and commissioning of 63A 4 pole ATS (Automatic
Transfer Switch) in the existing panel board with necessary control wiring and other
accessories.
17
-
-
... More
OD32140/2024-2025
Supply, Installation, Testing and commissioning of 100A 4 pole ATS (Automatic
Transfer Switch) in the existing panel board with necessary control wiring and other
accessories.
2
-
-
... More
OD32141/2024-2025
Supply, Installation, Testing and commissioning of 125A 4 pole ATS (Automatic
Transfer Switch) in the existing panel board with necessary control wiring and other
accessories.
2
-
-
... More
MCB, DB and RCCB
-
-
-
... More
90.11.1.11
Supply and installation of sheet steel, phosphatised and painted, dust and vermin
proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus
and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable
anchor bolts or fixed in recess including cutting hole on the wall , making good the
damages, colour washing etc. as required6 way (8+18) - three phase double cover (IP
42/43)
7
-
-
... More
2.10.1 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature
circuit breaker suitable for inductive load of following poles in the existing MCB DB
complete with connections, testing and commissioning etc. as required.Single pole
92
-
-
... More
2.11
Supplying and fixing single pole blanking plate in the existing MCB DB complete
etc. as required.
128
-
-
... More
2.13.1
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing
MCB DB complete with connections, testing and commissioning etc. as required.40
amps
7
-
-
... More
2.15.1
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts,
residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in
the existing MCB DB complete with connections, testing and commissioning etc. as
required.25 amps
2
-
-
... More
2.15.2
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts,
residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in
the existing MCB DB complete with connections, testing and commissioning etc. as
required.40 amps
5
-
-
... More
2.18
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2
pole and earth,metal enclosed plug top along with 20 amps "C" curve, SP, MCB, in
sheet steel enclosure, on surface or in recess, with chained metal cover for the socket
out let and complete with connections, testing and commissioning etc. as required.
4
-
-
... More
2.13.2
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing
MCB DB complete with connections, testing and commissioning etc. as required.63
amps
1
-
-
... More
2.15.3
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts,
residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in
the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps
2
-
-
... More
2.3.2
Supplying and fixing following way, single pole and neutral, sheet steel, MCB
distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar,
neutral bus bar, earth bar, din bar, interconnections, powder painted including
earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door
88
-
-
... More
2.12.1
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing
MCB DB complete with connections, testing and commissioning etc. as required.40
amps
88
-
-
... More
2.14.1
Supplying and fixing following rating, double pole, (single phase and neutral), 240
volts, residual
current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in
the existing MCB DB complete with connections, testing and commissioning etc. as
required.25 amps
88
-
-
... More
90.11.1.14
Supply and installation of sheet steel, phosphatised and painted, dust and vermin
proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus
and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable
anchor bolts or fixed in recess including cutting hole on the wall , making good the
damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical
DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/
TP MCB as outgoing (IP 42/43)
1
-
-
... More
90.11.1.15
Supply and installation of sheet steel, phosphatised and painted, dust and vermin
proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus
and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable
anchor bolts or fixed in recess including cutting hole on the wall , making good the
damages, colour washing etc. as required6 way (8+18) - double cover TPN vertical
DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/
TP MCB as outgoing (IP 42/43)
1
-
-
... More
90.11.1.16
Supply and installation of sheet steel, phosphatised and painted, dust and vermin
proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus
and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable
anchor bolts or fixed in recess including cutting hole on the wall , making good the
damages, colour washing etc. as required8 way (8+18) - double cover TPN vertical
DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/TP MCB as outgoing (IP 42/43)
1
-
-
... More
90.11.1.19
Supply and installation of sheet steel, phosphatised and painted, dust and vermin
proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus
and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable
anchor bolts or fixed in recess including cutting hole on the wall , making good the
damages, colour washing etc. as required6 way (8+12) - double cover TPN vertical
DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP
42/43)
2
-
-
... More
OD32146/2024-2025
Supply, Installation, testing and commissioning of 40 A to 63 A, MCB (C
curve), 10 kA breaking capacity Three pole/four pole with reputed brands.
42
-
-
... More
2.10.4
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature
circuit breaker suitable for inductive load of following poles in the existing MCB DB
complete with connections, testing and commissioning etc. as required.Triple pole
30
-
-
... More
90.14.8.12
1000 A, 4 pole, manual draw out type, microprocessor based ACB with overload ,
instantaneous SC , delayed SC and ground fault protection 50kA
1
-
-
... More
90.14.10.1
Supply, conveyance and fixing the following types & current rated control gears &
switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the
existing panel assembly as required.16 A-100A, 16 kA (Ics=100%Icu), 3 pole, current
limiting type MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL
45
-
-
... More
90.14.10.4
Supply, conveyance and fixing the following types & current rated control gears &
switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the
existing panel assembly as required.16 A-100A, 25/35 kA (Ics=100%Icu), 4 pole,
current limiting type MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL
16
-
-
... More
90.14.10.5
Supply, conveyance and fixing the following types & current rated control gears &
switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the
existing panel assembly as required.16A -100A, 35/36 kA (Ics=100%Icu), 3 pole,
current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC
1
-
-
... More
90.14.10.6
Supply, conveyance and fixing the following types & current rated control gears &
switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the
existing panel assembly as required.125A, 35/36 kA (Ics=100%Icu), 3 pole, current
limiting type MCCB with microprocessor based release with overload setting of 50 -
100% having adjustable OL & SC
21
-
-
... More
90.14.10.8
Supply, conveyance and fixing the following types & current rated control gears &
switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the
existing panel assembly as required.200A, 35/36 kA (Ics=100%Icu), 3 pole, current
limiting type MCCB with microprocessor based release with overload setting of 50 -
100% having adjustable OL & SC
4
-
-
... More
90.14.10.15
Supply, conveyance and fixing the following types & current rated control gears &
switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the
existing panel assembly as required.320A/400A, 50/55 kA (Ics=100%Icu), 3 pole,
current limiting type MCCB with microprocessor based release with overload setting
of 50 - 100% having adjustable OL & SC
2
-
-
... More
2.2.5
Providing and fixing following rating and breaking capacity and pole MCCB in
existing cubicle panel board including drilling holes in cubicle panel, making
connections, etc. as required.200 Amp, 25 KA,TPMCCB
1
-
-
... More
2.2.10
Providing and fixing following rating and breaking capacity and pole MCCB in
existing cubicle panel board including drilling holes in cubicle panel, making
connections, etc. as required.500 Amp, 35 KA,TPMCCB
1
-
-
... More
2.2.14
Providing and fixing following rating and breaking capacity and pole MCCB in
existing cubicle panel board including drilling holes in cubicle panel, making
connections, etc. as required.125 Amp, 36 KA
3
-
-
... More
2.2.15
Providing and fixing following rating and breaking capacity and pole MCCB in
existing cubicle panel board including drilling holes in cubicle panel, making
connections, etc. as required.200 Amp, 36 KA
1
-
-
... More
2.2.8
Providing and fixing following rating and breaking capacity and pole MCCB in
existing cubicle panel board including drilling holes in cubicle panel, making
connections, etc. as required.315 Amp., 35 KA,TPMCCB
1
-
-
... More
2.10.5
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature
circuit breaker suitable for inductive load of following poles in the existing MCB DB
complete with connections, testing and commissioning etc. as required.Triple pole
and neutral
16
-
-
... More
Earthing
-
-
-
... More
90.16.1.10
Supply and drawing bare earthing conductors of the following sizes along with
wiring/ cables and giving connection as required3.25 mm GI conductor (10 SWG)
970
-
-
... More
90.16.3.8
Supply and clamping the following size of strips on surface of wall/ parapet/ existing
cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty
GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages,
colour washing etc. as required ( for horizontal run)20 x 3 mm copper strip
1400
-
-
... More
90.16.5.3
Supply of superior quality copper earth socket for the following size of earth
conductor including crimping etc. as required.3.15 mm (10 SWG)
88
-
-
... More
5.6
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including
accessories, and providing masonry enclosure with cover plate having locking
arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as
required.
2
-
-
... More
OD32131/2024-2025
Earthing with G.I. earth plate 1200 mm X 1200 mm X 12.5 mm thick CI/GI including
accessories, and providing masonry enclosure with cover plate having locking
arrangement and watering pipe of 4 metre long etc. with charcoal/ coke and salt as required.
22
-
-
... More
5.8
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc.
as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt &
spring washer spaced at 50mm)
200
-
-
... More
5.14
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for
connections etc. as required.
85
-
-
... More
Cable and Termination
-
-
-
... More
90.12.40.33
Supply & laying of one No. PVC insulated and PVC sheathed armoured copper
power cable of 1.1 KV grade of the following sizes in the existing masonry open duct
as required.4 core 10 sq mm
498
-
-
... More
90.12.40.34
Supply & laying of one No. PVC insulated and PVC sheathed armoured copper
power cable of 1.1 KV grade of the following sizes in the existing masonry open duct
as required.4 core 16 sq mm
104
-
-
... More
90.12.41.33
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
copper power cable, 1.1 KV grade of the following sizes using clamps noted along
with the cables, spacing of clamps not exceeding 60cms, making good the damages ,
colour washing etc. as required.4 core 10 sq mm with factory made clamp
200
-
-
... More
90.12.41.34
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
copper power cable, 1.1 KV grade of the following sizes using clamps noted along
with the cables, spacing of clamps not exceeding 60cms, making good the damages ,
colour washing etc. as required.4 core 16 sq mm with factory made clamp
55
-
-
... More
9.1.32
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.4 X 10 sq. mm (25mm)
34
-
-
... More
9.1.33
Supplying and making end termination with brass compression gland and aluminium
lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.4 X 16 sq. mm (28mm)
6
-
-
... More
90.12.6.27
Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium
power cable of 1.1 KV grade of the following sizes in the existing masonry open duct
as required.3.5 core 25 sq mm
2757
-
-
... More
90.12.7.27
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.3.5 core 25 sq mm with factory made
clamp
704
-
-
... More
9.1.20
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.3 1/2X25 sq.mm (28mm)
84
-
-
... More
90.12.6.12
Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium
power cable of 1.1 KV grade of the following sizes in the existing masonry open duct
as required.3 core 4 sq mm
9012
-
-
... More
90.12.7.12
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.3 core 4 sq mm with factory made clamp
458
-
-
... More
9.1.2
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.2 X 10 sq. mm (19mm)
192
-
-
... More
90.12.6.28 Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium
power cable of 1.1 KV grade of the following sizes in the existing masonry open duct
as required.3.5 core 35 sq mm
225
-
-
... More
90.12.6.29
Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium
power cable of 1.1 KV grade of the following sizes in the existing masonry open duct
as required.3.5 core 50 sq mm
301
-
-
... More
90.12.7.28
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.3.5 core 35 sq mm with factory made
clamp
48
-
-
... More
90.12.7.29
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.3.5 core 50 sq mm with factory made
clamp
85
-
-
... More
9.1.21
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.3 1/2X 35 sq. mm (32mm)
12
-
-
... More
9.1.22
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.3 1/2 X 50 sq. mm (35mm)
10
-
-
... More
90.12.5.41
Supply & laying of one number PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/
HUME / STONE WARE/ GI/ DWC pipe as required.4 core 16 sq mm
50
-
-
... More
90.12.10.3 Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including
excavation63/50 mm or nearest size
50
-
-
... More
90.12.6.39
Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium
power cable of 1.1 KV grade of the following sizes in the existing masonry open duct
as required.4 core 6 sq mm
350
-
-
... More
90.12.7.39
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.4 core 6 sq mm with factory made clamp
136
-
-
... More
9.1.7
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.3 X 10 sq. mm (22mm)
20
-
-
... More
90.12.6.31
Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium
power cable of 1.1 KV grade of the following sizes in the existing masonry open duct
as required.3.5 core 95 sq mm
120
-
-
... More
90.12.7.31
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.3.5 core 95 sq mm
60
-
-
... More
9.1.24
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.3 1/2X 95 sq. mm (45mm)
8
-
-
... More
90.12.5.27
Supply & laying of one number PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/
HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 25 sq mm
250
-
-
... More
90.12.10.4
Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including
excavation77/63 mm or nearest size
250
-
-
... More
90.12.6.37
Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium
power cable of 1.1 KV grade of the following sizes in the existing masonry open duct
as required.3.5 core 400 sq mm
50
-
-
... More
90.12.6.32
Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium
power cable of 1.1 KV grade of the following sizes in the existing masonry open duct
as required.3.5 core 120 sq mm
60
-
-
... More
90.12.6.33
Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium
power cable of 1.1 KV grade of the following sizes in the existing masonry open duct
as required.3.5 core 150 sq mm
12
-
-
... More
90.12.6.34
Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium
power cable of 1.1 KV grade of the following sizes in the existing masonry open duct
as required.3.5 core 185 sq mm
120
-
-
... More
90.12.6.35
Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium
power cable of 1.1 KV grade of the following sizes in the existing masonry open duct
as required.3.5 core 240 sq mm
45
-
-
... More
90.12.6.36
Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium
power cable of 1.1 KV grade of the following sizes in the existing masonry open duct
as required.3.5 core 300 sq mm
80
-
-
... More
90.12.5.36
Supply & laying of one number PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/
HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 300 sq mm
160
-
-
... More
90.12.5.37 Supply & laying of one number PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/
HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 400 sq mm
160
-
-
... More
90.12.6.30
Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium
power cable of 1.1 KV grade of the following sizes in the existing masonry open duct
as required.3.5 core 70 sq mm
3
-
-
... More
9.1.23 Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.3 1/2X 70 sq. mm (38mm)
2
-
-
... More
9.1.25
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.3 1/2 X 120 sq. mm (45mm)
2
-
-
... More
9.1.26
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.3 1/2 X 150 sq. mm (50mm)
2
-
-
... More
9.1.27
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.3 1/2X 185 sq. mm (57mm)
20
-
-
... More
9.1.29
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.3 1/2X 240 sq. mm (62mm)
14
-
-
... More
9.1.30
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.3 1/2X 300 sq. mm (70mm)
12
-
-
... More
9.1.31
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.3 1/2X 400 sq. mm (82mm)
8
-
-
... More
Safety Equipments
-
-
-
... More
OD32125/2024-2025
Charge for creating proper identification marks on the DB, TPN DB, VDB and panel
board. as per the standards of KEI,KSEB,KSCADC
300
-
-
... More
OD32126/2024-2025
Providing and Fixing of Electrical ISI Grade Rubber Mat suitable for
440Volts Switchboards.
35
-
-
... More
OD32127/2024-2025
Supply and installation of fire bucket with stand
10
-
-
... More
OD32128/2024-2025
S/F DCP fire extinguisher (5Kg): supply and installation of 5kg Dry chemical
power type (DCP) fire extinguishers having ISI mark along with mounting supports
etc.as required.
36
-
-
... More
OD32129/2024-2025
Supply and providing Cable Route Marker
100
-
-
... More
OD32130/2024-2025
Supply and fixing of 4.5 KG CO2 type fire extinguisher
28
-
-
... More
Fittings
-
-
-
... More
90.3.19.3
Supply conveyance, installation, testing and commissioning the light fittings of
following types made from CRCA sheet 0.5mm thickness with all accessories and
lamps directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated
and sheathed round copper conductor flex wire or extending the original wiring and
giving connections as required1200 mm 1X20W LED Lamp with box type fixture
181
-
-
... More
OD32132/2024-2025
Supply, Installation, Testing and Commissioning of 20 W LED round/Square surface
or recessed down light with cool or warm light with standard accessories for fixing in
the wall, ceiling, ACP, or other as per site condition. (Reputed brands LED down
light, Brand approved by the Engineer incharge)
262
-
-
... More
OD32133/2024-2025
Supply, installation, testing and commissioning of exhaust fan in the existing opening
making good damage, connection, testing, commissioning etc. as required. (a) 230
mm metal body (Make:- reputed brands or brand approved by the site engineer- light
duty)
3
-
-
... More
OD32134/2024-2025
Supply, Installation, Testing and Commissioning of heavy duty exhaust fan
4
-
-
... More
OD32135/2024-2025
Supply, Installation, Testing and commissioning of 1200 mm sweep ceiling fan
(BLDC), 5 star rated with minimum 3 year on site replacement warranty suitable to
work with regulator. The rate inclusive of 2 MD type fan regulator and 30 cm down
rod of standard accessories and wiring. The fan should deliver 230 cm m air delivery
capacity, 370 RPM speed. (Kulirma Josh or equivalent make)
2
-
-
... More
Cable Tray
-
-
-
... More
4.1.1
Supplying and installing following size of perforated pre-painted M.S. cable trays
with
perforation not more than 17.5%, in convenient sections, joined with connectors,
suspended from the ceiling with M.S. suspenders including bolts & nuts, painting
suspenders etc as required.100 mm width X 50 mm depth X 1.6 mm thickness
120
-
-
... More
4.1.3
Supplying and installing following size of perforated pre-painted M.S. cable trays
with
perforation not more than 17.5%, in convenient sections, joined with connectors,
suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.225 mm width X 50 mm depth X 1.6 mm thickness
60
-
-
... More
4.1.4
Supplying and installing following size of perforated pre-painted M.S. cable trays
with
perforation not more than 17.5%, in convenient sections, joined with connectors,
suspended from the ceiling with M.S. suspenders including bolts & nuts, painting
suspenders etc as required.300 mm width X 50 mm depth X 1.6 mm thickness
280
-
-
... More
4.1.6
Supplying and installing following size of perforated pre-painted M.S. cable trays
with
perforation not more than 17.5%, in convenient sections, joined with connectors,
suspended from the ceiling with M.S. suspenders including bolts & nuts, painting
suspenders etc as required.450 mm width X50 mm depth X 2.0 mm thickness
120
-
-
... More
4.1.7
Supplying and installing following size of perforated pre-painted M.S. cable trays
with
perforation not more than 17.5%, in convenient sections, joined with connectors,
suspended from the ceiling with M.S. suspenders including bolts & nuts, painting
suspenders etc as required.600 mm width X 50 mm depth X 2.0 mm thickness
250
-
-
... More
Panel Board
-
-
-
... More
90.14.1.2
Fabrication, supply, conveyance, installation testing and commissioning of floor or
wall mounting, dust and vermin proof, cubicle type MV panel board comprising of
the following components/ devices & complying to IS 8623.
Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly
as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved
design and requirement, with front and rear access facility, bus bar chambers, hinged
doors for all switch gear compartments, earthing the doors using 4 sq mm braided
copper conductor, providing necessary cut-outs for mounting meters, relays,
indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber
and cable alley, powder coating the assembly after subjecting to 7 tank process etc as
required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles
etc shall not be used for the fabrication of panel assembly. The measurments will be
taken the area of the complete sheets used for panel board including partitions,
folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA
sheet, powder coated (excluding base frame)
2633.68
-
-
... More
90.14.2.1
Supply and providing 2mm SMC sheet as shrouding for bus interconnection /
terminations etc. including required nut & bolt etc.
100
-
-
... More
90.14.2.3
Supply and providing 4mm SMC sheet as shrouding for bus interconnection /
terminations etc. including required nut & bolt etc.
25
-
-
... More
90.14.3.2
Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU'
section rubber beeding suitable for 1.60/ 2.00 mm sheet
300
-
-
... More
90.14.4
Supply and fabrication conveyance and installation of base frame of panel board
using 75 x 40 mm rolled steel channel (ISMC)
70
-
-
... More
90.14.5
Supply and fabrication conveyance and installation of angle iron frame work for wall
mounting panel board
150
-
-
... More
90.14.6
Supply and providing copper bus bars including finger type SMC bus bar supports in
the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as
required.
100000
-
-
... More
90.14.7
Supply and providing copper earth bus in the panel board
60000
-
-
... More
OD32136/2024-2025
Supply, Installation of Digital Multi Function Meter (MFM) for monitoring the
current, voltage and frequency etc, of the circuit in the existing panel board. with all
necessary equipment's like CT and others.
6
-
-
... More
OD32137/2024-2025
Supply, installation and commissioning of LED indicator light in the existing panel
board of all respective color for EB/ DG supply indication, with necessary control
wiring
40
-
-
... More
HT work
-
-
-
... More
OD32147/2024-2025 Supply, Erection, Installation, Testing and Commissioning of 11KV/433V, 630 KVA
Indoor Dry type Cast resin type copper wound Air natural cooled Unitised Sub
Station-Indoor-with VCB Panel-11 kv-630 kVA. Cast resin Transformer
with offcircuit tappings from +5% to -10% in steps of 2.5%, changeable by tap links
provided,
with LT cable box with LT CT and NCT and HV terminals connected to 11KV,
26.3A, 630A
VCB panel power pack with incoming suitable for XLPE cable and output connected
to
11KV seal off bushing to the transformer.
Type:TRP
1
-
-
... More
OD32148/2024-2025
Supply, Erection, Testing and Commissioning of 11 KV, 630A, 21 KA Ring main
unit as per KSEB specifications. 12 kV, SF6 Ring Main Unit complete MakeSchneider( HSN Code; 8537 ) one side (Extensible, Outdoor-(2
Isolator+1Breakers+FRTUFBX-E/12-20/CCT2+FRTU/Outdoor – Motorized+
Battery Charger.
1
-
-
... More
OD32149/2024-2025
Supply, Erection, Testing and Commissioning of HT Multi Panel-11KV-IndoorVCBP-VCBMP-VCBP (HT Multi panel )with all standards to meet the KSEB and
KSEI norms. Incomer : VCB Panel, Outgoing(1) : VCB Panel, Outgoing (2): VCBM
Panel.
1
-
-
... More
8.1.2
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11
KV grade of
following size direct in ground including excavation, sand cushioning, protective
covering and refilling the trench etc as required.Above 120 sq. mm and upto 400 sq.
mm
195
-
-
... More
8.4.2
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11
KV grade of
following size in the existing masonry open duct as required.Above 120 sq. mm and
upto 400 sq. mm
35
-
-
... More
10.4.3
Supplying and making indoor cable end termination with heat shrinkable jointing kit
complete with all accessories including lugs suitable for following size of 3 core,
XLPE aluminium conductor cable of 11 KV grade as required:240 sq. mm
2
-
-
... More
10.4.4
Supplying and making indoor cable end termination with heat shrinkable jointing kit
complete with all accessories including lugs suitable for following size of 3 core,
XLPE aluminium conductor cable of 11 KV grade as required:300 sq. mm
2
-
-
... More
10.5.3
Supplying and making outdoor cable end termination with heat shrinkable jointing kit
complete
with all accessories including lugs suitable for following size of 3 core, XLPE
aluminium conductor
cable of 11 KV grade as required :240 sq. mm
1
-
-
... More
10.5.4
Supplying and making outdoor cable end termination with heat shrinkable jointing kit
complete
with all accessories including lugs suitable for following size of 3 core, XLPE
aluminium conductor
cable of 11 KV grade as required :300 sq. mm
1
-
-
... More
OD32150/2024-2025
Supplying of 11 KV HT Aluminium conductor XLPE insulation steel strip armoured
PVC outer sheath (A2XFY) cable of size 3 core 300 sqmm
175
-
-
... More
OD32151/2024-2025
Supplying of 11 KV HT Aluminium conductor XLPE insulation steel strip armoured
PVC outer sheath (A2XFY) cable of size 3 core 240 sqmm
30
-
-
... More
Lift work
-
-
-
... More
OD32104/2024-2025
Supply, Erection, Testing and Commissioning of 20 (1360KG) passenger/ Bed (ICU
Bed size) Machine room less (gearless) lift, with a speed of 1 m/s, Having SS (304)
grade Hairline Finish material cabin and doors with 1000mm centre opening or 1200
mm automatic opening (Telescopic) with advance Door drive system. Normal travel
height with G+3 Opening (four). The lift should have all modern features and
facilities like Automatic Rescue Device (ARD), Overload Protective Device (OPD),
Correction drive to next level, Emergency Alarm @ Main Floor, Car Call backwards,
Overload function, constant indication/Buzzer, Bypass load Function, Auto Cut off
Fan and Light, Manual Rescue Operation & Centralized Hoisting for lesser
vibration and smooth travel, Pit Ladder, Micro movement Led Based Buttons, L.W.D.
(Load Weighing Device), Direction & Position Indicator In Car &
Landing, Advanced Car Position Indication, Automatic Brake Test function every
11hours<br>Every run brake supervision, Phase reversal functioning, Signal Fixtures, +10% to –10% Voltage Fluctuation Withstanding
Capacity, & Door Close Button, Door Open Button, Car Emergency Light,
Fireman Drive, Curtain of Light 169 Beams, Accurate Relevelling, Automatic,
Closed Door, Panel Board and other device for the operation of lift and other
necessary items as per the Kerala state electrical inspectorate standards. LED ceiling
light in the SS false ceiling with fan, communication device like intercom etc. The
rate inclusive of cabling from the existing panel board to lift panel board and The
rate inclusive of approval charges from electrical inspectorate. (Approved Make :
ATLAS, Jhonson, Infra )
3
-
-
... More
HVAC
-
-
-
... More
16.12.2.4
Supply, Installation, balancing and commissioning of fabricated at site GSS sheet
metal rectangular / round ducting complete with neoprene rubber gaskets, elbows,
splitter dampers, vanes, hangers, supports, etc as per approved drawings and
specifications of following sheet thickness complete as required.Site fabricated GSS
sheet metal rectangular ducting as per IS 655-2006 for 1.25 mm thick
125
-
-
... More
2 16.12.1.1
Supply, installation, balancing and commissioning of factory fabricated GSS sheet
metal rectangular/round ducting complete with neoprene rubber gaskets, elbows,
splitter dampers, vanes, hangers, supports etc. as per approved drawings and
specifications of following sheet thickness complete as required.Factory fabricated
GSS sheet metal rectangular ducting as per IS 655-2006 Thickness 0.63 mm sheet
500
-
-
... More
16.12.1.2
Supply, installation, balancing and commissioning of factory fabricated GSS sheet
metal rectangular/round ducting complete with neoprene rubber gaskets, elbows,
splitter dampers, vanes, hangers, supports etc. as per approved drawings and
specifications of following sheet thickness complete as required.Factory fabricated
GSS sheet metal rectangular ducting as per IS 655-2006 Thickness 0.80 mm sheet
300
-
-
... More
16.12.1.3
Supply, installation, balancing and commissioning of factory fabricated GSS sheet
metal rectangular/round ducting complete with neoprene rubber gaskets, elbows,
splitter dampers, vanes, hangers, supports etc. as per approved drawings and
specifications of following sheet thickness complete as required.Factory fabricated
GSS sheet metal rectangular dueling as per IS 655-2006 Thickness 1.00 mm sheet
25
-
-
... More
16.12.1.4
Supply, installation, balancing and commissioning of factory fabricated GSS sheet
metal rectangular/round ducting complete with neoprene rubber gaskets, elbows,
splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.factory fabricated
GSS sheet metal rectangular dueling as per IS 655-2006 Thickness 1.25 mm sheet
20
-
-
... More
16.19.1
Supplying, installation, testing & commissioning of thermal insulated flexible duct of
following sizes duly supported at regulator interval as per site requirement etc.
complete as required as per specifications.Thermal insulated flexible duct (200 mm
dia)
50
-
-
... More
16.23.1
Supplying and fixing of following thickness duly laminated aluminum foil of mat
finish closed cell Nitrile rubber (class "O") insulation on existing duct after applying
two coats of cold setting adhesive (CPRX compound). The joints shall sealed with 50
mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per
specifications and as required.Nitrile rubber insulation - 25 mm
800
-
-
... More
16.23.2
Supplying and fixing of following thickness duly laminated aluminum foil of mat
finish closed cell Nitrile rubber (class "O") insulation on existing duct after applying
two coats of cold setting adhesive (CPRX compound). The joints shall sealed with 50
mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per
specifications and as required.Nitrille rubber insulation - 25 mm
120
-
-
... More
16.22.1
Supplying, fixing acoustic lining on wall and celling of AHU rooms with 50 mm
thick, density 32 kg/cu.m resin bonded glass fiber insulation friction fixed in 610 mm
x 610 mm frame work made of 25x50x50x50x25xmm made out of 0.6 mm thick GI
sheet U shaped channel and covered with reinforced fiber glass tissues and finished
with0.80 mm perforated aluminum sheet etc. complete as required and as per
specifications.50 mm thick resin bonded glass wool having density of 32 kg/cum
180
-
-
... More
16.13
Supply, Insulation, testing and commissioning of GI volume control duct damper
complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as
per specifications. GI volume control duct damper
8
-
-
... More
16.20.1
Supplying, Fixing, testing and commissioning of fire dampers in supply air duct/
main branch and return air path as and where required of required sizes i/c control
wiring, the damper shall be motorized and spring return so as to close the damper in
the event of power failure automatically and open the same in case of power being
restored. The spring return action shall be inbuilt mechanism and not externally
mounted. The damper shall also be closed in the event of fire signal complete as
required and as per specifications.Fire damper
5
-
-
... More
16.20.2
Supplying, Fixing, testing and commissioning of fire dampers in supply air duct/
main branch and return air path as and where required of required sizes i/c control
wiring, the damper shall be motorized and spring return so as to close the damper in
the event of power failure automatically and open the same in case of power being
restored. The spring return action shall be inbuilt mechanism and not externally
mounted. The damper shall also be closed in the event of fire signal complete as
required and as per specifications.Actuator
3
-
-
... More
16.16.a
Supplying and Fixing of powder coated extruded aluminium Return Air Grills with
louvers but without volume control dampers complete as required.
12
-
-
... More
16.18
Supplying, fixing testing commissioning of Return air diffusers of powder coated
aluminum without volume control dampers with anti smudge ring and removable
core.
19
-
-
... More
16.15
Suppluying and Fixing of powder costed extruded aluminium Supply Air Grills with
aluminium volume control dampers as per specifications.
15
-
-
... More
16.17
Supplying, fixing testing commissioning of supply air diffusers of powder coated
aluminum with aluminum volume control dampers with anti smudge ring and
removable core.
26
-
-
... More
OD32107/2024-2025
Supply, installation and testing of GSS, factory fabricated Round/Spiral
ducts,120GSM Zinc coated, complete with necessary flanges as specified in the
technical specification, necessary supports using thread roads and anchor bolts,
supply air collars, vanes, splitters dampers duly painting of the ducts as per
specification and as specified by the consultant/owner using 22 or 24 SWG . Note :
No additional rates for wastage
180
-
-
... More
OD32108/2024-2025
Supply, installation and testing of Acoustic Insulation of ducts using open cell
processed elastomeric nitrile rubber having a density of 150 +/- 10 Kg/m3. The
insulation should have Built-in Anti-Microbial Product Protection, and should pass
Fungi Resistance as per ASTM G 21 and Bacterial Resistance as per ASTM E 2180.
100
-
-
... More
OD32109/2024-2025 Supply, installation, testing and commissioning of GI powder coated round butterfly
damper Frame Thickness shall be1.2mm, & Blade thickness to be 1mm of size
with opposed blade and PVC gears for smooth operation of air volume control.
5
-
-
... More
OD32110/2024-2025
Supply, installation, testing and commissioning of extruded Aluminium profile, anti
corrosive, jet diffuser with control damper.
Emblazon shall be as per architect's/client's advise
15
-
-
... More
OD32111/2024-2025
Supply, Installation, Testing and Commissioning of Double Skinned, Thermal break ,
Eurovent/AHRI certified Ceiling suspended Air Handling Units with minimum 40
mm thick panels of 40-42 Kg/Cu M density with 0.60 mm precoated GSS outer skin
and 0.60mm plain inner skin , filter section with MERV-14 & MERV-8 filters,
Two 6R DX coil section of 11TR capacity each, fan section with direct driven
backward curved Plenum plug fan with aerofoil design blades with VFD, the motor
selected shall be energy efficient having efficiency IE3. Motor shall be suitable for
415±10% volts, 50 Hz, 3 phase AC supply with suitable Armoured cable
from starter panel to motor upto 7m including glanding at both ends through a local
isolator near AHU, Earthing, Supporting frame, vibration isolators and all necessary
accesories as per specification. AHUs shall be selected for a maximum face velocity
of 500 FPM (2.5MPS) at coil side, Fan outlet velocity shall not exceed 2000 FPM
(10 MPS). Equipment Drain till U-Trap to be considered. Air handling unit shall be
selected for the lowest operating noise level of less than 65 DB (A) at 2 meter
distance. The Contractor shall submit the ESP calculation as per the site condition for
approval.
CAP : 22 TR, AFR : 6600 CFM, ESP : 250 Pa
1
-
-
... More
OD32112/2024-2025
Supply, Installation, Testing and Commissioning of Double Skinned, Thermal break ,
Eurovent/AHRI certified floor mounted Air Handling Units with minimum 40 mm
thick panels of 40-42 Kg/Cu M density with 0.60 mm precoated GSS outer skin and
0.60mm plain inner skin , mixing box with fresh air intake section, filter section with
MERV-8 filters, Two 6R DX coil section of 8.5TR capacity each, fan section with
direct driven backward curved Plenum plug fan with aerofoil design blades with
VFD, the motor selected shall be energy efficient having efficiency IE3. Motor shall
be suitable for 415±10% volts, 50 Hz, 3 phase AC supply with suitable
Armoured cable from starter panel to motor upto 7m including glanding at both ends
through a local isolator near AHU, Earthing, Supporting frame, vibration isolators
and all necessary accesories as per specification. AHUs shall be selected for a
maximum face velocity of 500 FPM (2.5MPS) at coil side, Fan outlet velocity shall
not exceed 2000 FPM (10 MPS). Equipment Drain till U-Trap to be considered. Air
handling unit shall be selected for the lowest operating noise level of less than 65 DB
(A) at 2 meter distance. The Contractor shall submit the ESP calculation as per the
site condition for approval.
CAP : 17 TR, AFR : 5100 CFM, ESP : 250 Pa.
1
-
-
... More
OD32114/2024-2025
"Supply, Installation, Testing and Commissioning of Inverter type DX
Condensing unit with AHU Kit, Expansion Valve & Filter Drier 400/440V,
50/60Hz, Three phase, comprised of scroll driven compressor, condenser coil, low
noise condenser fan, fan guard, motor protection, supporting stands, vibration
isolators etc.
Refrigerant shall be R410 A
Unit shall be supplied with corded remote controller with LED/LCD display
information. COP of the unit shall be > 3.5
"
11 TR
2
-
-
... More
OD32116/2024-2025
Supply, Installation, Testing and Commissioning of Inverter type DX Condensing
unit with AHU Kit, Expansion Valve & Filter Drier 400/440V, 50/60Hz, Three
phase, comprised of scroll driven compressor, condenser coil, low noise condenser
fan, fan guard, motor protection, supporting stands, vibration isolators etc.
Refrigerant shall be R410 A Unit shall be supplied with corded remote controller with
LED/LCD display information. COP of the unit shall be > 3.5
2
-
-
... More
OD32118/2024-2025
Supply, Installation, Testing and commissioning of 25mm thick mineral wool
insulated Double Skin Inline Exhaust. Outer skin shall be 0.8 mm pre plasticized or
powder coated GSS sheet. Inner sheet shall be 0.8 mm plain GSS perforated.
Extruded Aluminum corners. Complete with motor guard, cable entry, GSS base
frame. Screw less construction with zero leakage in the panel joints. Inspection door
for all the sections.
Necessary MS Support with Two coats of epoxy primer and 1 coat epoxy painting to
be considered where unit located outdoor. Fan: PLUG TYPE , IE - 3, Motor shall be
suitable for Variable Frequency Drive along with spring Isolators and
415±10% volts, 3 phase AC supply, Frequency range shall be 10% to 100%.
3 phase AC supply with suitable Armored cable from starter panel to motor up to 7m
including glanding at both ends through a local isolator near equipment. The
harmonic levels in the VFD shall not exceed the the limits specified in IEEE 519
Standards. The Contractor shall submit the ESP calculation as per the site condition
for approval. of AFR : 3040/3600 CFM, ESP : 300/200 Pa.
2
-
-
... More
OD32119/2024-2025
Supply, Installation, Testing and commissioning of 25mm thick mineral wool
insulated Double Skin Inline exhaust/fresh air fans. Outer skin shall be 0.8 mm pre
plasticized or powder coated GSS sheet. Inner sheet shall be 0.8 mm plain GSS
perforated. Extruded Aluminum corners. Complete with Glass view panel, motor
guard, marine light, limit switch, cable entry, GSS base frame. Screw less
construction with zero leakage in the panel joints. Inspection door for all the sections.
Necessary MS Support with Two coats of epoxy primer and 1 coat epoxy painting to
be considered where unit located outdoor. 1 phase AC supply with regulator for speed adjustment. The Contractor shall submit the ESP calculation as per the site
condition for approval. with starter panel and other necessary equipment. of AFR :
700/950/1230/1280/1735 CFM, ESP : 200 Pa
2
-
-
... More
OD32123/2024-2025
Supply , installation, testing and commissioning of ceiling suspended multi-speed jet
fans with Al aero foil propeller, galvanized steel sheet casing, noise arrestors, inlet
and outlet guards, IP 55 class H motor protection, tested according to EN 12101-3
300 DEG C for minimum 2 hours, complete in all aspects conforming to the technical
specifications. with necessary equipment
14
-
-
... More
OD32124/2024-2025
Supply, installation, testing and commissioning of floor/ceiling mounted round axial
smoke extract fan with statically and dynamically balanced fan-motor assembly,
galvanized steel /equivalent impellers, adjustable pitch angle, heavy gauge
galvanized steel casing, IE 2 motors with IP55 protection with Class H insulation,
IP55 rated motor terminal box, vibration isolators complete in all aspects conforming
to the technical specifications. Entire unit construction shall be able to withstand
temperature upto 250 Deg C for a minimum of 2 hours. The Indicated static pressure
is only provisional. Contractor to calculate static pressure based on final approved
construction drawing and pressure drop of finalized Equipment / Items and submit for
review / approval to the consultants. The procurement shall be processed only after
duly verification / approval of calculation and selection from the consultants.
Capacity of fan shall be as follows
AFR : 24000 CFM, ESP : 300 Pa (Normal mode - 2 Working) (Fire Mode - 4
Working)
4
-
-
... More
OD32162/2024-2025
Supply, installation, testing and commissioning of seamless hard drawn Copper
piping for following units duly insulated with 13 mm thick nitrile rubber insulation
for gas line and liquid line, along with communication cabling through PVC conduit.
Refrigeration piping to be taken in the piping rack / support individually connecting
to all indoor units. Even necessary supports, fittings, valves & where ever
required will be included. Outdoor piping shall be with polyshield coating and
installed in a PVC pipe and ensure that refrigerant lines are weather protected with
Foster mastic sealent or equivalent. of size 15.99mm
250
-
-
... More
OD32163/2024-2025
Supply, installation, testing and commissioning of seamless hard drawn Copper
piping for following units duly insulated with 13 mm thick nitrile rubber insulation
for gas line and liquid line, along with communication cabling through PVC conduit.
Refrigeration piping to be taken in the piping rack / support individually connecting
to all indoor units. Even necessary supports, fittings, valves & where ever
required will be included. Outdoor piping shall be with polyshield coating and
installed in a PVC pipe and ensure that refrigerant lines are weather protected with
Foster mastic sealent or equivalent.
250
-
-
... More
OD32167/2024-2025
Supply, transportation, and fixing in position of rigid PVC (10 kg/sq.cm) condensate
drain water piping with necessary supports and fittings like, U-traps, elbows, tees and
reducers insulated with 9mm nitrile rubber and BOPP tape. 32 mm dia
50
-
-
... More
Fire Alarm
-
-
-
... More
17.1.1
FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)Supplying,
installation, testing & commissioning of heat detector operating at 54ºC / 57ºC with
rate of rise cum fixed temperature (dual thermistor) type with mounting base
complete with all connection etc. as required.
25
-
-
... More
17.1.2
FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)Supplying,
installation, testing & commissioning of smoke detector with built-in LED and
mounting base complete with all connections etc. as required.
25
-
-
... More
17.1.3
FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)Supplying,
installation, testing & commissioning of manual call boxes of MS Construction in
surface/recess with stainless steel chain & hammer assembly Complete with glass and
push button etc. as required
25
-
-
... More
17.1.4
FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)Supplying,
installation, testing & commissioning of manual call box of ABS type in
surface/recess with stainless steel chain & hammer assembly complete with glass and
push button etc. as required.
10
-
-
... More
17.1.5
FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)Supplying,
installation, testing & commissioning response indicator on surface/ recess MS box
having two LEDs metallic cover complete with all connections etc. as required.
15
-
-
... More
17.1.6
FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)Supplying,
installation, testing & commissioning fire alarm sounder with facility to make
announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable
for operation with amplifier i/c line matching transformer etc. complete as required
18
-
-
... More
17.2.1.1
Supplying, installation, testing and commissioning of micro processor based
intelligent addressable main fire alarm panel, central processing unit with the
following loop modules and capable of supporting not less than 240 devices
(including detectors) and minimum 120 detectors per loop and loop length up to 2
km, network communication card, minimum 320 character graphics/ LCD display
with touch screen or other keypad and minimum 4000 events history log in the non
volatile memory (EPROM), power supply unit (230 ± 5 % V, 50 hz), 48 hrs back-up
with 24 volt sealed maintenance free batteries with automatic charger. The panel shall
have facility to connect printer to printout log and facility to have seamless
integration with analog/digital voice evacuation system ( which is part of the schedule
of work under SH: PA System) and shall be complete with all accessories . The panel
shall be compatible for IBMS system with open protocol Bacnet/ Modbus over IP
complete as per specifications.
INTELLIGENT FIRE ALARM SYSTEMTen Loop Panel
1
-
-
... More
17.5.2
CABLING & WIRINGSupplying & laying of 2x1.5 sq mm fire alarm armoured
cable, 600/1000V rated with annealed copper conductor having XLPE insulation,
steel wire armouring & FRLS outer sheath complete as required.
1300
-
-
... More
17.5.3.1
Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable
in the existing surface / recessed steel conduit of following pairs, cores and size
including connections and interconnections etc. as required.speaker cable Single pair,
2-core, 1.5 sq mm
400
-
-
... More
17.5.4
Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all
ancillaries and accessories like coupler etc. as required.
150
-
-
... More
1.21.2
Supplying and fixing of following sizes of medium class PVC conduit along with
accessories in surface/ recess including cutting the wall and making good the same in
case of recessed conduit as required.25 mm
100
-
-
... More
1.21.4
Supplying and fixing of following sizes of medium class PVC conduit along with
accessories in surface/ recess including cutting the wall and making good the same in
case of recessed conduit as required.40 mm
100
-
-
... More
90.14.28.7 S & F Motor starters of the following ratingsFully automatic star delta starter for
25HP motor
1
-
-
... More
90.17.1.9
Electric driven Main Fire Pump: Supplying, installation, testing and commissioning
of Electric driven Main Fire Pump suitable for automatic operation and consisting of
following, complete in all respects, as required : (a) Horizontal type, multistage,
centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel
shaft, mechanical seal conforming to IS 1520. (b) Suitable HP Squirrel cage induction
motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3
phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted
type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated Common
base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable
cement concrete foundation duly plastered with anti vibration pads.1620 lpm at 56 m
Head
1
-
-
... More
OD32142/2024-2025
Preparation of drawings/ schemes/ documents and getting final approval/ sanction/
NOC from statutory departments viz. Fire Force Department, Tvm etc. as per rules
and regulations (statutory fees if any will be borne by the owner) & AMC
charges for three years after DLP to be considered.
1
-
-
... More
90.17.5.1
Fabrication, supply, Installation testing & commissioning of Electrical control panel
of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet,
compartmentalised with hinged lockable doors, dust and vermin proof, powder coated
of approved shade after 7 tank treatment process, cable alley, inter-connection with
suitable size copper conductor cable/solid copper strip, having switchgears and
accessories, mountings and internal wiring, earth terminals, numbering etc. complete
in all respect, suitable for main fire pump, pressurisation pump & diesel pump set
complete as per CPWD specification with following in coming and Outgoings,
suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection
class IP 42 as required :INCOMING
250A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with
selector switch Digital Ammeter (0-250 A) with selector switch & CTs etc. LED type
RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar
300A
OUTGOING
(Note : All outgoing feeders for pumps should have digital Ammeter with selector
switches, and LED type ON, OFF, trip indicating lamps)
Main Fire Pump
125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter
suitable for 60 HP pump with overload protection, current sensing type single phase
preventor complete with all accessories and internal wiring required for automatic
operation, selector switch for local/remote, auto/manual/OFF operation.
Jockey Pump
63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta
starter with overload protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector
switch for local/remote, auto/manual/OFF operation.
DIESEL ENGINE CONTROL
Control for diesel engine comprising - Automatic/Manual selector switch & 3
attempts starting device, timers and relays as required, push buttons, start/stop in
manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and
Engine on indication Battery charger suitable for 12V/24 V DC with boost and trickle
selector switch, 0-30 V DC volt meter, and 0- 20 A DC Ammeter All standard relays
and accessories for automatic operation of diesel engine System Controller
Designing, Supply, Installation, Testing and commissioning of system controller to
control operation of main electric fire pump, diesel pump, Pressurization pump,
Terrace pump in sequence as per specification consisting of relays, timers. Sensors,
annunciation window for fault indication, complete as per specification
1
-
-
... More
OD32143/2024-2025
Supplying and installing in position self glowing "FIRE
EXTINGUISHER" and " MANUAL CALL POINT" sign boards of
size (150 X 150 mm) made of luminescent safely, rigid sheet in green colour, photo
luminescent ACP sheet in protective glass with two hanging chains & necessary
supports to hang it on ceiling. Samples has to approved by the Architect before
procuring the same.
55
-
-
... More
OD32144/2024-2025
Supplying and installing in position self glowing "FIRE LIFT" and
"FIRE ASSEMBLY POINT" sign boards of size (150 X 300 mm) made
of luminescent safely, rigid sheet in green colour, photo luminescent ACP sheet in
protective glass with two hanging chains & necessary supports to hang it on
ceiling. Samples has to approved by the Architect before procuring the same.
10
-
-
... More
OD32145/2024-2025
Supplying and installing in position self glowing "FIRE EXIT",
"FIRE EXIST in stair case (up, down, left and right) sign boards of size (150 X
400 mm) made of luminescent safely, rigid sheet in green colour, photo luminescent
ACP sheet in protective glass with two hanging chains & necessary supports to
hang it on ceiling. Samples has to approved by the Architect before procuring the
same.
35
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements