Kerala State Coastal Area Development Corporation Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 2,00,000Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_SCADC_698480_1Bid Award Id
ViewTender No
ET-34/2024-25 (PQ)Tender Authority
Kerala State Coastal Area Development Corporation Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
2.33.2 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 60 cm girth up to and including 120 cm girth
1
-
-
2.33.3 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyond 120 cm girth up to and including 240 cm girth
6
-
-
2.33.4 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Above 240 cm girth
4
-
-
2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
726
-
-
2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
583.2
-
-
20.2.4 : Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap).500 mm dia piles
84
-
-
20.2.2 : Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap).400 mm dia piles
532
-
-
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
14.05
-
-
od102402/2024_2025 : (Ref. Item No. 10.2) Prefabricated factory made structural steel work riveted, bolted, or welded in built up sections, trusses, Built-Up/Hot rolled sections/Bracings, and framed work including supply and fixing of anchor bolts, base plates, cutting, hoisting, fixing in position and applying a priming coat of approved epoxy primer and epoxy painting 2 coats with approved quality epoxy paint all complete. The steel structure is to be designed fabricated, supplied, and erected through Pre-Engineering and the design shall be approved by the Engineer in charge. Steel section shall confirm to IS 2062:2011 E350, E250 or its Equivalent.
46500
-
-
5.33.1 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level
47.49
-
-
5.33.2 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level
72.8
-
-
5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
9130
-
-
5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
3600
-
-
5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
297.05
-
-
5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
400
-
-
5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
257.29
-
-
2.35.3.1 : Diluting and injecting chemical emulsion for POST -CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion):Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
170
-
-
2.34.1 : Supplying chemical emulsion in sealed containers including delivery as specified.Chlorpyriphos / Lindane emulsifiable concentrate of 20%
50
-
-
6.47 : Providing and laying autoclaved aerated cement blocks masonry with 150mm/
230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V
level with RCC band at sill level and lintel level with approved block laying polymer
modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The
payment of RCC band and reinforcement shall be made for seperately).
72.63
-
-
4.17 : Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.
55
-
-
13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)
668.79
-
-
13.11 : 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 ( 1 cement : 6 fine sand).
668.79
-
-
22.23.1 : Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin- charge. The product performance shall carry guarantee for 10 years against any leakage.For vertical surface two coats @0.70 kg per sqm
37.08
-
-
22.23.2 : Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin- charge. The product performance shall carry guarantee for 10 years against any leakage.For horizontal surface one coat @1.10 kg per sqm.
270.5
-
-
13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
668.79
-
-
13.83.2 : Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.Two coats
668.79
-
-
13.85.3 : Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With water thinnable cement primer on walls surface having VOC content less than 50 grams / litre
1337.58
-
-
10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
4950
-
-
13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
690
-
-
26.65 : Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet
confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh
3mm laid at 100x100 mm grid including edge trim covered with concrete. This
metal deck will be supported on structural steel beam with shear studs. (Structural
steel like Beam, column, joists etc. & concrete of different grade as per design
will be paid separately).
490
-
-
50.2.25.1 : Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
10
-
-
13.48A.1 : Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including
priming coat of exterior primer applied @ 0.90 litre/10 sqm.
668.79
-
-
11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
448.49
-
-
od102919/2024_2025 : (Ref. Item No. 11.55.1) Providing and laying Lappato finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
33.32
-
-
8.2.2.1 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shadeArea of slab upto 0.50 sqm
6
-
-
8.31 : Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622
(thickness to be specified by the manufacturer), of approved make, in all colours,
shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge,
in skirting, risers of steps and dados, over 12 mm thick bed of cement
mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @
3.3kg per sqm, including pointing in white cement mixed with pigment of matching
shade complete.
280.92
-
-
od78055/2024_2025 : Providing and fixing PVC eave board of good quality approved by the engineer J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete: Eave's pieces
72.1
-
-
od102960/2024_2025 : (Ref. Item No. 2.25) Filling available excavated earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge.
50
-
-
50.2.26.1 : Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge.
55
-
-
od99708/2024_2025 : Providing and laying antiskid vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.<br>Size of Tile 600 x 600 mm.
60.48
-
-
od78056/2024_2025 : Providing, supplying and fixing aluminum expanded metal mesh panels, with pre-powder coated finish. The sheet shall be fixed using self drilling/ self tapping SS screws and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, all complete as per drawings, specification and direction of the Engineer in Charge
70
-
-
od78048/2024_2025 : Providing and fixing Exterior Grade V Board of 12mm thickness and with a density not less than 1200 Kg/ Cu.mtr and shall meet requirements s per IS 14862:2000.All necessary accessories required for smooth fixation of V Board shall be considered.
290.86
-
-
od78057/2024_2025 : Providing and fixing of Hollow metal door at all levels from ISO 9001-2000 certified Manufacturer. The metal doors should be made from high grade galvanised steel stretched level sheet flush, with vision panel, louvers etc. Single /Double leaf to required sizes and approved make shakti met-dor or equivalent which consists of frame, shutter, infill and finish as detailed below and conforming to IS 277. Door frame shall be single rebate profile of size 100 x 57 mm made out of 1.20mm minimum thick galvanized steel sheet (18 gauge ). Frames should be mitered and field assembled with self tabs. Door frames should be prepared for suitable hardware as scheduled and should have necessary reinforcement to withstand regular wear and tear. All provision should be mortised, drilled and tapped for receiving the hardware. Rubber door silencers should be provided on the striking jamb. All door frames should be provided with backplate and anchor fasteners for installation on a finished plastered masonry wall opening. Once the frame is installed it should be grouted with cement & sand slurry.Door leaf should be 46mm thick flush double skin door with vision panel of suitable size. Door leaf shall be manufactured from 0.8mm (22 guage) minimum thick galvanised steel sheet. The internal construction of the door should be rigid with steel stiffeners/ pads and reinforcement. The infill material shall be resin bonded honeycomb core. All doors should be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, shaft locks, flush pull and tower bolt etc. The edges should be interlocked with lock seam. For pair of doors astragals will be provided as required. 450x750mm Vision lite wherever applicable should be of size fixed with rubber beeding. The glass should be 4mm clear toughned glass. All doors and frames shall be finished with polyurethane aliphatic grade powder coating minimum of 50 microns of approved colour. The door leaf and frame shall have passed minimum 500 hours of salt sprey test. Rate should include supply and installation of door and hardware as a complete assembly as mentioned in the door and hardware schedule. a). Steel Door TD1 Single leaf 600x1500mm without vision panel with frame on Four sides & hardware set ,Hinges 3090 F, 5 Knl, 2 Ball bearing butt hinges size 4" x 3" x 3mm SS 304, Mortice Shaft Dead lock with Allen key 8681, SSS, Flush Pull Handle 1208, OVAL, SSS
18
-
-
9.147E.2 : Providing and fixing factory made uPVC white colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVC extruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately).br Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Two track four panels sliding window made of (big series) frame 67 x 50
mm & sash 46 x 62 mm both having wall thickness of 2.3 +/- 0.2 mm and
single glazing bead / double glazing bead of appropriate dimension. (Area
of window above 4.00 sqm upto 8.00 sqm).
261.03
-
-
50.6.1.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.
54.69
-
-
9.7.7.2 : Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:5.5mm thick glass pane
261.03
-
-
9.147C.2 : Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately).br Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x
19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion
67 x 80 mm all having wall thickness of 2.3 +/- 0.2 mm and single glazing bead /
double glazing bead of appropriate dimension.(Area of door upto 2.50 sqm)
149.04
-
-
od102223/2024_2025 : (Ref. Item No. 9.7.7.2) Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel Inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: 5.5mm thick toughened glass pane
149.04
-
-
22.5 : Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
47.5
-
-
Dormitory Block
-
-
-
2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
611.1
-
-
od78033/2024_2025 : Extra for excavating trenches for pipes, cables, etc, in all kinds of soil<br>for depth exceeding 3 m in depth, but not exceeding 4.5 m. (Rate is<br>over corresponding basic item for depth upto 1.5 metre.)
377.05
-
-
od78035/2024_2025 : Extra for excavating trenches for pipes, cables etc. in all kinds of soil for<br>depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over<br>corresponding basic item for depth upto 1.5 metre).
377.05
-
-
5.34.1 : Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable/ recoverable separately.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum).
172.1
-
-
20.2.2 : Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap).400 mm dia piles
1176
-
-
20.2.4 : Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap).500 mm dia piles
168
-
-
5.33.1 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level
87.59
-
-
5.33.2 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level
91.91
-
-
od102402/2024_2025 : (Ref. Item No. 10.2) Prefabricated factory made structural steel work riveted, bolted, or welded in built up sections, trusses, Built-Up/Hot rolled sections/Bracings, and framed work including supply and fixing of anchor bolts, base plates, cutting, hoisting, fixing in position and applying a priming coat of approved epoxy primer and epoxy painting 2 coats with approved quality epoxy paint all complete. The steel structure is to be designed fabricated, supplied, and erected through Pre-Engineering and the design shall be approved by the Engineer in charge. Steel section shall confirm to IS 2062:2011 E350, E250 or its Equivalent.
82000
-
-
5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
17940
-
-
5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
363.96
-
-
5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
257.29
-
-
od102960/2024_2025 : (Ref. Item No. 2.25) Filling available excavated earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge.
10
-
-
50.2.26.1 : Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge.
25
-
-
26.65 : Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet
confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh
3mm laid at 100x100 mm grid including edge trim covered with concrete. This
metal deck will be supported on structural steel beam with shear studs. (Structural
steel like Beam, column, joists etc. & concrete of different grade as per design
will be paid separately).
882.2
-
-
2.35.3.1 : Diluting and injecting chemical emulsion for POST -CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion):Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
494.5
-
-
2.34.1 : Supplying chemical emulsion in sealed containers including delivery as specified.Chlorpyriphos / Lindane emulsifiable concentrate of 20%
50
-
-
6.47 : Providing and laying autoclaved aerated cement blocks masonry with 150mm/
230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V
level with RCC band at sill level and lintel level with approved block laying polymer
modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The
payment of RCC band and reinforcement shall be made for seperately).
106.14
-
-
50.6.1.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.
111.44
-
-
13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)
1185.6
-
-
13.11 : 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 ( 1 cement : 6 fine sand).
1152.57
-
-
22.23.1 : Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin- charge. The product performance shall carry guarantee for 10 years against any leakage.For vertical surface two coats @0.70 kg per sqm
137.7
-
-
22.23.2 : Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin- charge. The product performance shall carry guarantee for 10 years against any leakage.For horizontal surface one coat @1.10 kg per sqm.
1091
-
-
13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
2344.29
-
-
13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
882.2
-
-
11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
668.41
-
-
11.47.2 : Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer,in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm
77.38
-
-
8.2.2.1 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shadeArea of slab upto 0.50 sqm
8.96
-
-
od102919/2024_2025 : (Ref. Item No. 11.55.1) Providing and laying Lappato finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
266.93
-
-
8.2.2.2 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm
13.5
-
-
8.31 : Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622
(thickness to be specified by the manufacturer), of approved make, in all colours,
shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge,
in skirting, risers of steps and dados, over 12 mm thick bed of cement
mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @
3.3kg per sqm, including pointing in white cement mixed with pigment of matching
shade complete.
510.27
-
-
od99708/2024_2025 : Providing and laying antiskid vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.<br>Size of Tile 600 x 600 mm.
135.48
-
-
od78047/2024_2025 : Providing and fixing PVC eave board of good quality approved by the engineer J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete: Eave's pieces
86.16
-
-
od78048/2024_2025 : Providing and fixing Exterior Grade V Board of 12mm thickness and with a density not less than 1200 Kg/ Cu.mtr and shall meet requirements s per IS 14862:2000.All necessary accessories required for smooth fixation of V Board shall be considered.
405
-
-
16.70.2 : Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I wire of dia 4 mm. PVC coated to achieve outer dia. not less than 5 mm in required colour and shade
765
-
-
9.147E.2 : Providing and fixing factory made uPVC white colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVC extruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately).br Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Two track four panels sliding window made of (big series) frame 67 x 50
mm & sash 46 x 62 mm both having wall thickness of 2.3 +/- 0.2 mm and
single glazing bead / double glazing bead of appropriate dimension. (Area
of window above 4.00 sqm upto 8.00 sqm).
173.94
-
-
9.7.7.2 : Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:5.5mm thick glass pane
173.94
-
-
od78050/2024_2025 : Providing and fixing asphaltic roofing shingles of suitable thickness(4-6mm) to withstand weather and other loading factors as would be required at site, as per directions of Engineer in charge. Colour and finish shall be approved by Engineer before procurement. Fixing shall be on standard mode, onto V board which will be paid under different item. Work should follow all good engineering practices as would be required to incorporate installations like rain water gutters, ridge cover on proper mode as per design shown in the image and rates shall be including all cost and conveyance of all item material labour lead lift etc complete upto the top most level of the building shown in the drawing
695.86
-
-
9.121 : Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
274
-
-
9.122.1 : Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames.
77.22
-
-
9.122.2 : Providing and fixing to existing door frames.30 mm thick Fiberglass Reinforced Plastic (F.R.P) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used all filler material throughout the hollow panel, casted monoolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS : 14856, complete as per direction of Engineer-in-charge.
44.2
-
-
13.83.2 : Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.Two coats
1580
-
-
13.85.3 : Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With water thinnable cement primer on walls surface having VOC content less than 50 grams / litre
1580
-
-
13.48A.1 : Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including
priming coat of exterior primer applied @ 0.90 litre/10 sqm.
471
-
-
Yard Development Works
-
-
-
16.78.1 : Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With Material conforming to Grade - I ( size range 75 mm to 0.075 mm) having CBR Value- 30
122.55
-
-
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
23.3
-
-
16.91.2 : Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
850
-
-
16.79 : Providing , laying spreading and compacting graded stone aggregate ( size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub - base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer - in- Charge.
42.5
-
-
5.33.1 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level
69.9
-
-
5.33.2 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level
236.8
-
-
4.3.1 : Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns
284.4
-
-
4.3.2 : Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.
608
-
-
5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
5000
-
-
5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
30000
-
-
13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
288
-
-
10.25.2 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
1500
-
-
13.62.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .
270
-
-
13.45.1 : Finishing walls with textured exterior pint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm
24.25
-
-
16.69 : Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge)
8.11
-
-
19.7.1.2 : Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weigh of cover 23 kg and weight of frame 15 kg):With Sewer bricks conforming to IS : 4885
3
-
-
19.6.3 : Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand) including testing of joints etc. complete:250 mm dia R.C. C. pipe
6
-
-
od78044/2024_2025 : Providing and laying Multi groove Paver tile of size 500 x 250mm x 40mm thick of Besant beton / approved make in all colours, finish, laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with cement etc., complete. Work include for preparation of base surface & finished the surface as directed.
38.27
-
-
Miscellenous
-
-
-
15.2.1 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
10
-
-
15.3 : Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.
19.3
-
-
15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar
15
-
-
15.9.2 : Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In cement mortar
15
-
-
15.13.1 : Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area 3 sq. metes and below
3
-
-
15.13.2 : Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area beyond 3 sq. metres
5
-
-
15.19 : Dismantling steel work manually / by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per directions of Engineer -in-Charge.
1510
-
-
15.28.2 : Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :Asbestos Sheet
3000
-
-
od78036/2024_2025 : Providing and fixing Rain water gutter (FRP) of superior quality and of size 25 cm in depth and 20 cm in width including all necessary accessories/ clamps/ joints/stop ends etc. for the smooth installation of the same. Colour shall be as per direction of Engineer-in Charge.
85
-
-
od78037/2024_2025 : Socketing of Pile in rock by cutting the rock for a minimum of 450 mm for pile of dia 450mm & 500 mm
35.05
-
-
20.6.1.1 : Vertical load testing of piles in accordance with IS 2911( Part IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of engineer -in-Charge.Single pile upto 50 tonne capacityInitial test
1
-
-
5.28 : Providing and fixing in position 12 mm thick bitumen impregnated fibre board conforming to IS: 1838, including cost of primer, sealing compound in expansion joints.
83.96
-
-
Miscelleneous works
-
-
-
od78590/2024_2025 : Filling available excavated earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 100 m and lift up to 1.5 m as per direction of site Engineer-in-charge.
10
-
-
od78591/2024_2025 : Providing and fixing Exterior Grade V Board of 12mm thickness and with a density not less than 1200 Kg/ Cu.mtr and shall meet requirements s per IS 14862:2000.All necessary accessories required for smooth fixation of V Board shall be considered.
80
-
-
od78593/2024_2025 : Providing and fixing asphaltic roofing shingles of suitable thickness(4-6mm) to withstand weather and other loading factors as would be required at site, as per directions of Engineer in charge. Colour and finish shall be approved by Engineer before procurement. Fixing shall be on standard mode, onto V board which will be paid under different item. Work should follow all good engineering practices as would be required to incorporate installations like rain water gutters, ridge cover on proper mode as per design shown in the image and rates shall be including all cost and conveyance of all item material labour lead lift etc complete upto the top most level of the building shown in the drawing
80
-
-
od78594/2024_2025 : Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
5.4
-
-
od78595/2024_2025 : Providing and fixing PVC eave board of good quality approved by the engineer J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete: Eave's pieces
2
-
-
od78597/2024_2025 : Preparing the surface with 25-40 mm thick concrete screed( 1:2:4) by using coarse graded aggregate of 6 to 12 mm size laid over floor concrete and finished smooth and even surface to receive the Tile adhesive/Cement mortar as instructed by Client. Thickness up to 25 mm
10
-
-
od78598/2024_2025 : Providing & laying Fire Retardant Carpet Flooring of 100% Nylon Type 6, material Carpet tile of nominal thickness of 4-5 mm with size of 500 mm x 500 mm respectively of approved make Welfsun carpet or equivalent. Completely & neatly finished. Tile size may be approved with minimal tolerance limits as provided by the Manufacturer's specification (Basic Rate:1345.50)
40
-
-
YARD FITTINGS AND GARDEN
-
-
-
30.2.2 : Supplying and stacking of good earth at site including royalty and carriage upto 5 k.m. lead complete (earth measured in stacks will be reduced by 20% for payment).
60
-
-
30.2.4.1 : Supplying and stacking at site dump manure from approved source, including carriage upto 5 k.m. lead complete (manure measured in stacks will be reduced by 8% for payment) :Screened through sieve of I.S. designation 20 mm
50
-
-
30.2.8 : Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
50
-
-
30.2.10.1 : Grassing with selection No. 1 grass including watering and maintenance of the lawn for 60 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately).In rows 5 cm apart in both directions
300
-
-
30.2.33 : Providing and fixing Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and even, watering with sprinkler
600
-
-
od78585/2024_2025 : Providing & installing Garden Sprinkler, Adjustable 360 Degree Rotation Lawn Sprinkler, Large Area Coverage, 3 Arm Sprinklers for Yard for Plant Irrigation .This includes necessary fixation of hosing & other necessary fittings from tapping point. Minimum size of sprinkler shall be 29 x 29 x 9.5 cms. Material shall be Acrylonitrile Butadiene Styrene.
15
-
-
od78587/2024_2025 : Providing and fixing chlorinated Polyvinyl chloride (CPVC) pipes, fittings up to 50 mm dia SDR 11 ASTM CTS and above 50mm dia CPVC schedule 80, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings this includes jointing of pipes & fittings with one step CPVC solvent cement,trenching, refilling &testing of joints complete as per direction of Engineer in Charge.External work of 100 mm nominal outer dia pipes
80
-
-
od78592/2024_2025 : Providing and Displaying Cosmos well developed fresh & healthy 20 to 25<br>cm ht. attractive colors multi branching at blooming stage in 20 cm Earthen<br>Pot/Plastic Pot and as per direction of the officer-in-charge
100
-
-
PLUMBING ESTIMATE
-
-
-
17.3.1 : Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
30
-
-
17.7.4 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x400mm with single 15 mm C.P.brass
pillar taps
30
-
-
17.7.6 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap
2
-
-
17.4.1 : Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:One urinal basin with 5 litre white P.V.C. automatic flushing cistern
16
-
-
17.10.2.2 : Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink without drain board610x460 mm bowl depth 200 mm
4
-
-
18.17.1 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore
5
-
-
18.17.2 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore
5
-
-
18.18.3 : Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:25 mm nominal bore
5
-
-
18.19.2.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):32 mm nominal boreHorizontal
5
-
-
18.19.2.2 : Providing and fixing gun metal non-return valve of approved quality (screwed end):32 mm nominal boreVertical
5
-
-
18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
10000
-
-
18.51.1 : Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore
20
-
-
18.52.1 : Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 893115 mm nominal bore
20
-
-
18.65 : Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fittings arrangements, weighing not less than 106 gms.
22
-
-
50.17.1.3 : Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
22
-
-
50.17.1.4 : Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.
46
-
-
50.18.8.3.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 12 kgf/cm2
100
-
-
50.18.8.4.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 32 mm pipe 10Kgf/cm2
100
-
-
50.18.8.4.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 32 mm pipe 6Kgf/cm2
50
-
-
50.18.8.5.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 40 mm pipe 6Kgf/cm2
50
-
-
50.18.8.6.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2
50
-
-
50.18.8.7.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work including cutting chases and making good the wall etc. 63 mm pipe 6 Kgf/cm2
50
-
-
50.18.8.9.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2
50
-
-
50.18.9.22.1 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow
10
-
-
50.18.9.22.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend
10
-
-
50.18.9.22.5 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia Tee
10
-
-
50.18.9.22.8 : Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl
10
-
-
18.63 : Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms
60
-
-
12.41.2 : Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter
30
-
-
18.7.5 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall40 mm nominal outer dia pipes
30
-
-
18.8.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes
150
-
-
18.8.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes
60
-
-
18.7.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall32 mm nominal outer dia pipes
40
-
-
od104619/2024_2025 : Supply and Labour for Installation of CP Brass Shower Arm, Shower Head, complete with Supporting Accessories, wall chasing, refinishing etc as per building norms.
22
-
-
od104620/2024_2025 : Supply and Labour for Installation of CP Brass Diverter, complete with Supporting Accessories, wall chasing, refinishing etc as per building norms
5
-
-
od104623/2024_2025 : Supply and Labour for Installation of CP Brass Spout, complete with Supporting Accessories, wall chasing, refinishing etc as per building norms
22
-
-
od104626/2024_2025 : Supply and Labour for Sink Pillar cock
4
-
-
od104628/2024_2025 : Supply and Labour for Bottle trap<br>
4
-
-
od104631/2024_2025 : Supply and Labour for Installation of site 15mm dia C.P brass Bib tap/hose connector with wall flange including cutting and making good the wall wherever required
25
-
-
od104670/2024_2025 : "Supply and Labour for Installing at site UPVC multi inlet traps and outlet connections to pipes using solvent cement complete as required for floor drains.<br>(Supreme/Astral or equivalent) "<br>Multi Inlet floor trap 110x75x50/40mm.<br>
65
-
-
od107662/2024_2025 : Providing and fixing FRP anaerobic septic tanks of size 1512 Lit volume (<br>2000x900x840 mm or near size) and 5 mm thick for 50 flush/users including all cost of labour, transportation<br>and installation as ordered by Engineer in charge.
4
-
-
19.33 : Constructing soak pit 1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
6
-
-
od108489/2024_2025 : Supplying and installing Concrete ring of 1.20 m diameter with 7.5 cm thickness and 30 cm height including sinking the rings in all classes of soil including all cost of conveyance, labour charges tools and plants and all other incidental charges etc complete.
36
-
-
od107670/2024_2025 : Providing FRP (Fibre Reinforced Plastic) grating- grills spacing not more than 5cm., thickness of grill not less than 4cm and grill member thickness not less than 4mm including all cost, conveyance and labour charges etc. complete.
5.63
-
-
od104678/2024_2025 : Supply and Labour for Installation, testing and commissioning of Manholes, valvechamber, sandtrap etc..<br>including escavation, backfilling, disposel, concrete<br>waterproofing etc upto 1 metre depth all in accordance with the drawing ,specification and relevant standards.<br>Size(as per the site condition): 60 cm x 60 cm<br>
10
-
-
od104679/2024_2025 : Supply and Labour for Installation,testing and commissioning of Manholes, valvechamber, sandtrap etc..<br>including escavation,backfilling, disposel, concrete<br>waterproofing etc upto 1 mtr depth all in accordance with the drawing ,specification and relevant standards.<br>Size(as per the site condition): 45 cm x 45 cm<br>
10
-
-
od104680/2024_2025 : MANHOLE COVER<br>Supply and Labour for Installation ,testing & commisssioning of ISI marked FRP manhole cover and frame of (10 ton withstanding capacity) conforming to the latest relevant IS specifications<br>Make:Thermodrain<br>Size: 60 cm x 60 cm<br>
10
-
-
od104681/2024_2025 : MANHOLE COVER<br>Supply and Labour for Installation ,testing & commisssioning of ISI marked FRP manhole cover and frame of (10 ton withstanding capacity) conforming to the latest relevant IS specifications<br>Make:Thermodrain<br>Size: 45 cm x 45 cm<br>
10
-
-
od104686/2024_2025 : Supply & Installation of Grab Bar<br>
12
-
-
od104687/2024_2025 : Supply and Installation of Towel Ring <br>
22
-
-
od104688/2024_2025 : Supply and Installation of Robe Hook<br>
22
-
-
od104689/2024_2025 : Supply and Installation of Towel Rack<br>
22
-
-
od104692/2024_2025 : Supply and Installation of Hand Dryer<br>
10
-
-
od104693/2024_2025 : Supply and Installation of Tissue Holder<br>
22
-
-
od104694/2024_2025 : Supply and Labour for Installation of water level float switch system for water level controlling<br>
7
-
-
od108410/2024_2025 : Providing , supply and fixing Open well submersible pump-1.5HP including all fittings and accessories of approved IS make etc complete as per design and drawings
2
-
-
od108411/2024_2025 : Providing , supply and fixing Borewell Submersible Pump-1.5HP water cooling with 6mm dia ss rop including all fittings and accessories of approved IS make etc complete as per design and drawings
2
-
-
od104699/2024_2025 : Supply and installation of Water heater with 10 Litre tank<br>
5
-
-
od107720/2024_2025 : Design, Supply, Installation, Testing and Commissioning of 20KLD Sewage Treatment Plant including necessary civil works, assistance for statutory clearance & staff training to successfully install the STP plant, to obtain outflow parameters as per KSPCB norms for treated water. (NB: Scope includes Operation & Maintenance, the provisions which will be separately finalized with concerned local body and not to be included in the quoted rate)
1
-
-
od105265/2024_2025 : Fabrication and installation of Fire water tank using structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position all complete.
4500
-
-
13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
267.8
-
-
Fire Fighting, Fire Alarm
-
-
-
od104564/2024_2025 : Supply, installation, testing and commissioning of Pressure Gauge with required range/capacity.<br>
2
-
-
od104566/2024_2025 : Supply, erection, testing and Commissioning of Motor control panel for Terrace pump incorporating automatic direct online starter for fire pumps switch gear rated for the motor HP. The control panel mounting shall include necessary indication lamps for the RYB phase showing the power supply conditions ammeter with clear indications or motor full load current, voltmeter with selector switch etc. The panel shall duily painted with proper anti-corrosive lacquer and is of wall mounted type with all accessories as required etc. complete. <br>
2
-
-
od104568/2024_2025 : Supply, Installation, Testing and Commissioning Electrically driven Monoblock Terrace pump of capacity 900 LPM with all the necessary accessories operating on 3 Ph. 50 Hz. 415 V AC supply including foundation, bolts etc. complete, The Pump set shall be of 5 HP. (Foundation required shall be provided by the client). <br>
2
-
-
od104570/2024_2025 : Supply, installation, testing and commissioning of Pressure Switch for automatic operation.<br>
2
-
-
od104572/2024_2025 : Under Ground Piping: Supply, erection, testing and commissioning of heavy duty M.S 'C' class Pipes confirming to IS 3589 / IS :1239 part - I with malleable specials confirming to IS:1239 part - II, such as elbows, reducers, flanges etc. Including cutting, Welding, laying under ground, by using suitable supports,and wrapping with polymer corrossion protection tape confirming to IS 10221 with proper overlapping, trimming etc complete. etc. complete (The Rate for excavation shall be extra as applicable) : 100mm dia <br>
50
-
-
od104574/2024_2025 : Above Ground Piping: Supply, erection, testing and commissioning of heavy duty M.S 'C' class Pipes confirming to IS 3589/ IS :1239 part - I with malleable specials confirming to IS:1239 part - II, such as elbows, reducers, flanges etc. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports, The pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour / shade. (Core cutting in walls/beams/columns for laying pipes shall be provided by client, if necessary)<br>80mm dia
10
-
-
od104577/2024_2025 : Above Ground Piping: Supply, erection, testing and commissioning of heavy duty M.S 'C' class Pipes confirming to IS 3589/ IS :1239 part - I with malleable specials confirming to IS:1239 part - II, such as elbows, reducers, flanges etc. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports, The pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour / shade. (Core cutting in walls/beams/columns for laying pipes shall be provided by client, if necessary) <br>100 mm dia<br>
50
-
-
od104578/2024_2025 : Supplying, Installing, testing and commissioning CI Butterfly valve slim seal standared lever operated type confirming to IS 13095 with required flanges, nuts, bolts etc. complete.<br>
6
-
-
od104581/2024_2025 : Supply, installation, testing and commissioning of C.I. Non-Return Valve slim seal type with required flanges, nuts & bolts, gasket etc. complete<br>
2
-
-
od104583/2024_2025 : Supply, installation, testing and commissioning of instantaneous pattern SS Single Headed Hydrant valve of 63mm Dia, oblique type, instantaneous hose coupling adaptor complete with PVC blank cap etc.<br>
6
-
-
od104585/2024_2025 : Supply and placed in position of SS Branch Pipe, 63mm female instantaneous inlet, male threaded outlet, complete with hexagonal base nozzle. <br>
6
-
-
od104587/2024_2025 : Supply and placed in position of Controlled Percolated Hose conforming to IS: 636, 63mm dia, 15 Mtrs length with SS 63 mm pair of male and female couplings etc. <br>
6
-
-
od104588/2024_2025 : Supply, installation, testing and commissioning of Hydraulic Hose Reel drum completed with swinging type drum with 19mm dia thermoplast braided hose of 30M. length and Shut off nozzle, with necessery fittings etc. complete. <br>
6
-
-
od104590/2024_2025 : Supplying, installing, testing and commissioning of Cast iron Ball valves with fittings of screwed end type. 25mm dia<br>
6
-
-
od104592/2024_2025 : Supply, installation, testing and commissioning of Single Door Hose Cabinet to accommodate one piece of hose pipe along with one pair of male and female coupling and one branch pipe. The cabinet is made of 20swg M.S Sheet, glass fronted with hinged door and lock. The cabinet is spray painted to scarlet red color. <br>
6
-
-
od104595/2024_2025 : Supply, installation, testing and commissioning of single acting Air Release Valve with screwed inlet 20mm dia etc.<br>
2
-
-
od104596/2024_2025 : Supply, installation, testing and commissioning of Fire Brigade Inlet connection with 2 nos of 63 mm dia. built - in Gun metal Non- return valves instantaneous coupling type arranged on 100 mm dia.etc. Pipe manifold shall be connected to down comer pipe.<br> <br>
1
-
-
od104598/2024_2025 : Supplying and installing of in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC Non-reflective self adhesive vinyl painted foam board, complete with mirror fasteners. EXIT <br>
4
-
-
od104599/2024_2025 : Supplying and installing of in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC Non-reflective self adhesive vinyl painted foam board, complete with mirror fasteners. FIRE EXIT <br>
4
-
-
od104600/2024_2025 : Supplying and installing of in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC Non-reflective self adhesive vinyl painted foam board, complete with mirror fasteners. FIRE DUCT <br>
6
-
-
od104601/2024_2025 : Supply, installing, testing and commissioning of Micro processor based Main Fire alarm control panel of 4 zones capacity, with visual LED indications for fire / fault alarms, signals and should have stage alarm facility with maintenance free battery back up for 24 hours normal operation and 15 minutes alarm operation. The panel shall be fabricated by M.S. sheet and powder coated both inside & out side, door shall be glass fronted type with locking arrangement, as per specification.<br>
1
-
-
od104602/2024_2025 : Supply, Installation, testing and commissioning of Manual Call Point break glass type as per standrad specification. <br>
6
-
-
od104603/2024_2025 : Supply, installation, testing and commissioning of Electronic dual tone Hooter (Sounder) as per standard specification. <br>
6
-
-
od104604/2024_2025 : Supplying and laying of P.V.C conduit with all necessary fittings. Etc.<br>
100
-
-
od104605/2024_2025 : Supplying and laying of 1C x 1 Sq.mm cross section PVC insulated copper wires.<br>
160
-
-
od104606/2024_2025 : Supplying, and fixing of ABC type fire extinguisher of 4Kgs. Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, discharge hose, wall mounting bracket etc. complete.<br>
6
-
-
od104607/2024_2025 : Supplying and installing in position laminated sheet of "Fire Evacuation Plan". Providing wall mounting display board with double side 3mm thick imported acrylic sheet & glowsheet with SS Studs Digital color print on Traceperacy Sheets : Size 24"X18"<br>
4
-
-
od104608/2024_2025 : Supplying and installing in position Exit LED Signage (Arrow) - green led lightning with Battery backup for 3 hrs<br>
12
-
-
od104609/2024_2025 : Supplying and installing in position FIRE EXTINGUSHERS Signages ( Acrylic + Self Illumiated with LED Lights no backup, Triangular Type) Size 15"X4"<br>
6
-
-
od104610/2024_2025 : Supplying and installing in position Safe Assemble Point with 8 feet Size 2"X1"<br>
2
-
-
od104611/2024_2025 : Supplying and installing in position Way to safe assemble point with 8 feet Size 2"X1"
1
-
-
od104612/2024_2025 : Supplying and installing in position Fire Order Board 3"X2"
2
-
-
od104613/2024_2025 : Supplying and installing in position STAIRCASE SIGNAGES Acrylic + Self Illuminated Size 16"X6"
6
-
-
Electrification works
-
-
-
1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm
900
-
-
1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
100
-
-
1.21.3 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm
6
-
-
1.21.5 : Supplying and fixing of following sizes of medium class PVC conduit along with
accessories in surface/ recess including cutting the wall and making good the same in
case of recessed conduit as required.50 mm
5
-
-
Wiring and accessories
-
-
-
1.14.1
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of
FRLS PVC insulated copper conductor, single core cable in surface / recessed
medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire
700
-
-
1.14.2
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of
FRLS PVC insulated copper conductor, single core cable in surface / recessed
medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
100
-
-
1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C
222
-
-
1.11
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper
conductor single core cable in surface / recessed medium class PVC conduit, 2 way
modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
22
-
-
1.17.3 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm
400
-
-
1.17.12 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm
220
-
-
1.17.21 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm
100
-
-
1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch
44
-
-
1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet
44
-
-
1.26 : Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
50
-
-
1.31 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in
recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps
modular switch, connection etc. as required. (For light plugs to be used in non residential
buildings).
55
-
-
1.32
Supplying and fixing suitable size GI box with modular plate and cover in front on
surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular
socket outlet and 15/16 amps modular switch, connection etc. as required.
11
-
-
1.56 : Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light plugs to be used in non residential buildings).
10
-
-
2.16 : Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.
2
-
-
90.6.6.2
Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core
copper conductor flat cable for submersible pump motor conforming to IS 694 part I
1990 as required including giving necessary connections of the following sizes.2.50
sq mm
100
-
-
90.10.3.15
Supply and Fixing the following modular switches & accessories in the existing front
plates and giving necessary connections as required (RoHS compliant )32A DP
switch with indicator
6
-
-
90.10.3.32
Supply and Fixing the following modular switches & accessories in the existing front
plates and giving necessary connections as required (RoHS compliant )25A 3 pin
plug top with indicator
6
-
-
90.10.3.33
Supply and Fixing the following modular switches & accessories in the existing front
plates and giving necessary connections as required (RoHS compliant )25A 3pin
Shuttered socket
10
-
-
90.14.28.12
S & F Motor starters of the following ratingsSubmersible pump controllers with
ammeter,DPMCB for single phase 1.5 HP submersible motor pumps (DOL)
2
-
-
90.10.3.14
Supply and Fixing the following modular switches & accessories in the existing
front plates and giving necessary connections as required (RoHS compliant )25A SP
switch with indicator
4
-
-
1.53.1
Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing
surface/recessed steel/PVC conduit as required1 run of Cable
860
-
-
OD19510/2024-2025
Supply and installation of RJ45 socket with shutter
15
-
-
90.6.9.2
Supplying & Drawing unarmored PVC insulated and & PVC sheathed
copper conductor Telephone Pair Cable conforming to ITD specification for indoor
application through the existing conduit2 pair
800
-
-
1.24.6
Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as
required.Telephone socket outlet
15
-
-
1.24.7
Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as
required.TV antenna socket outlet
2
-
-
Fittings and Installations
-
-
-
90.3.20.3
Supply & installation of light fittings on TW round block
Supply, conveyance installation testing and commissioning the light fittings of
following types made of CRCA with 0.5mm thickness complete with all accessories
and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit
the fitting and giving connection with required length of 16/0.20mm 3 core copper
conductor flex wire conforming to relevant ISS and giving connections as required.1200 mm 1X20W LED Lamp with box type fixture
24
-
-
1.33 : Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block
including connection etc as required.
117
-
-
1.48
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia,
heavy gauge including painting etc. as required. (Note : More than 5 cm length shall
be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
52
-
-
1.49 : Numbering of ceiling fan / exhaust fan/ fluorescent fittings as required.
206
-
-
1.51 : Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes
25
-
-
90.4.1
Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per
IS 732 as required.
52
-
-
90.4.10 : Conveyance, installation , testing and commissioning of exhaust fans of size up to 450mm in the existing opening, fixing necessary anchor bolts / bolt and nuts etc., as required including giving connections with the supplied wire along with the exhaust fan.
25
-
-
90.6.5.9
Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC
sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS
694 part I 1960 in the existing surface / recess conduit as required including giving
necessary connections of the following sizes.3 core 0.75 sq mm
50
-
-
90.15.4.2 : Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)
10
-
-
OD19477/2024-2025
Supply, installation, and testing of mirror light fitting of the following specification:
10W LED Batten, 2 feet (similar to Wipro Garnet) Colour temp: Cool Day Light
(6500K) with 1000 lm. (Make:Philips/Wipro/Kesselec)
20
-
-
OD18464/2024-2025
Supply and fixing of Angle holder or pendent type with 15w LED lamp.Including
Lamp Shade. (Make:-Anchor or any better-approved make(approval should be
submitted to the department if necessary )
34
-
-
OD18465/2024-2025
Supply and fixing of bulk-head light fittings of the reputed company make, with
clear/frosted glass cover, 10-Watt LED Bulkhead, Lumen : 850 Lm, Power : 10 W,
Color Temperature : 6500 K, IP-65 rating, similar to Bajaj Ivora 10-Watt LED
Bulkhead. (Make: Bajaj/Philips/Havells/wipro/Crompton
20
-
-
OD19485/2024-2025
Supply, and installation of 12w T bulb light fitting of the following specification:
12W LED bulb, b22, Colour temp: (6000K-6500K) with 1080lm
55
-
-
OD19443/2024-2025
Supply, installation, testing and commissioning of Sleek Surface Round/rectangular
12W Cool White LED Mounted Downlighter of the following specification (similar
to Wipro Iris Slim Ultra LD80-101-XXX-60-SM Ultra sleek surface mounted slim
round downlighter). White powder coated, pressure die-cast aluminum
housing—excellent thermal management with aluminum construction.
Complete with LED, Driver, and accessories pre-wired up to terminal block. High
transmitivity, non-yellowing PMMA diffuser, Specially designed, easy to install
mounting clips, Design and manufactured to comply with IS10322 part 5/sec 1987,
Integrated electronic control gear, Suitable for surface mounting, Best Suited for
Office, Exhibition Hall, Reception Area, Corridor, CCT: 6000K, Color: Cool White,
Lumen1000 lm, Material: Aluminium, Power: 12W, Shape: Round, Voltage:
240V(Make: Wipro/Philips/Kesselec/ any equivalent spec PWD/KSCADC approved
make)
49
-
-
OD19442/2024-2025
Supply, installation, testing, and commissioning of Sleek Surface Round/rectangular
6W Cool White LED Mounted Downlighter of the following specification (similar to
Wipro Iris Slim Ultra Sleek Surface Round 6W Cool White LED Mounted
Downlighter-LD80-350-XXX-60-SM). Ultra sleek surface mounted slim round
downlighter, White powder coated, pressure die-cast aluminum housing, Excellent
thermal management with aluminum construction, Complete with LED, Driver and accessories pre- wired up to terminal block, High transmitivity, non-yellowing
PMMA diffuser, Specially designed, easy to install mounting clips, Design and
manufactured to comply with IS10322 part 5/sec 1987, Integrated electronic control
gear. Suitable for surface mounting, Best Suited for Office, Exhibition Hall,
Reception Area, Corridor. CCT: 6000K, Color: Cool White, Lumen:430 lm, Material:
Aluminium, Power: 6W, Shape: Round, voltage: 240V(Make:
Wipro/Philips/Kesselec/ any equivalent spec PWD/KSCADC approved make)
164
-
-
OD19420/2024-2025
Supply of 250 mm sweep Light Duty Exhaust fan in plastic body with self-opening
lowers working on 230V single phase A/C
25
-
-
OD18468/2024-2025
Supply, installation, testing, and commissioning of the following sweep ceiling fan,
including wiring the down rods of standard length (up to 30 cm) with 3-core flexible
Copper round cable, etc. as required. (a) 1200 mm sweep ceiling fan with steppedtype
electronic fan regulator, brand approved by the engineer in charge
52
-
-
OD19428/2024-2025
Supplying and installation of bulkhead fitting of following specifications: 10W,
20,000 burning hours, Dust and Waterproof, Warranty - 1 year, Colours - Natural
white / Cool white, Lumen output - 1000lm, IP 65 rating, PVC housing with
polycarbonate diffuser equivalent to PHILIPS vista glow 10w (Make: Philips /
Wipro/Kesselec or equivalent spec approved make by PWD or KSCADC)
20
-
-
OD18469/2024-2025
Supply of vertical open well submersible pump having a capacity of 1.5 hp, 9-stage
2
-
-
OD19383/2024-2025
Supplying and unloading 62.5/62 KVA diesel generator set with a standard control
panel on site..
1
-
-
OD19386/2024-2025
Supply and fixing 30 amps. TPN, industrial type socket outlet, with plug top and
metal chained cover in sheet steel enclosure
6
-
-
OD19419/2024-2025
Supply of shock treatment chart in glass with frame
1
-
-
OD19425/2024-2025
Supplying and fixing of Danger 415 V, 250 X 200 mm Enameled danger plates
3
-
-
1.58
Supplying and fixing PVC batten/ angle holder including connection etc. as required.
89
-
-
OD19487/2024-2025
Supply and installation of 9w LED bulb having 900lm or higher
(Make:Philips/Wipro/Kesselec or any equivalent spec PWD/KSCADC approved
make)
34
-
-
OD19491/2024-2025
Supply, installation, and testing of 17W wall light fitting of the following
specification: 17W LED wall light, Colour temp: 3000K-6500K (Similar to Philips
Ultron slim 17w). (Make:Philips/Wipro/Kesselec or equivalent spec PWD/KSCADC
approved make )
68
-
-
OD19496/2024-2025
Supply, installation, testing, and commissioning of 20W LED tube light fitting with 3
colour temperatures in same fitting. Specifications: 20W LED tubelight, Colour temp:
3000K, 4000K & 6500K, 4kv surge protection (Similar to Havells 20w Triyca).
(Make:Havells/Philips/Wipro/Kesselec or equivalent spec PWD/KSCADC approved
make )
24
-
-
OD19501/2024-2025
Supply, installation, testing, and commissioning of 10W/11w LED bollard light
fitting, IP 65, with Colour temp>3000K/6500K, EXTRUDED ALUMINIUM
HOUSING IP65, 800MM HEIGHT. Make:Havells/Philips/Wipro/Kesselec or
equivalent spec PWD/KSCADC approved make )
127
-
-
OD19506/2024-2025
Supply, installation, testing, and commissioning of 10W Vertical decorative Wall
Light(wall washer light/Up and down decorative Outdoor Wall light) (Similar to
Philips Lucent 10w) Make:Philips/Wipro/Kesselec or equivalent spec
PWD/KSCADC approved make )
26
-
-
OD19520/2024-2025
Supply, installation, and commissioning of 3kva UPS Single phase in and Single
phase out. with indoor (IP20) Input pf >0.99, double conversion technology with
input voltage range 140-280 @ full load, 50Hz, It shall be 100% generator
compatible, and isolation transformer built-in at input side. with Efficiency > 87%
and output power factor unity (3kVA= 3kW), and including all accessories etc. as
required. The acoustic noise at 1m of the system should be <65dB.The system shall
comply to IEC /EN 62040-1 safety, IEC/EN62040- 2, Electromagnetic Compatibility
IEC/EN 62040-3 performance, and relevant IS standards.
The system shall be true online double - conversion DSP based UPS system, and UPS shall be
with automatic bypass built-in. The system shall have IGBT rectifier and inverter.
Including
rack and interconnecting cables etc.... warranty certificates for 3 years for UPS and
batteries and transformer should be from UPS OEM. UPS. (Make: Numeric-
LEGRAND/ABB/GE/APC or equivalent spec approved) along with SITC of
BATTERY SMF 12v 65ahx 6 nos Exide/Quanta/Amaron Make, Back Up time 1
hours at full load.
1
-
-
DB and accessories
-
-
-
90.11.1.19
Supply and installation of sheet steel, phosphatised and painted, dust and vermin
proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus
and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable
anchor bolts or fixed in recess including cutting hole on the wall , making good the
damages, colour washing etc. as required6 way (8+12) - double cover TPN vertical
DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP
42/43)
1
-
-
90.11.1.20
Supply and installation of sheet steel, phosphatised and painted, dust and vermin
proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus
and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable
anchor bolts or fixed in recess including cutting hole on the wall , making good the
damages, colour washing etc. as required8 way (8+12) - double cover TPN vertical
DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP
42/43)
1
-
-
90.14.10.3
Supply, conveyance and fixing the following types & current rated control gears &
switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the
existing panel assembly as required.16 A-100A, 16 kA (Ics=100%Icu), 4 pole, current
limiting type MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL
2
-
-
90.11.1.10 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required 4 way (8+12) - three phase double cover (IP
42/43)
10
-
-
2.3.3 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door
3
-
-
2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
150
-
-
2.12.1
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing
MCB DB complete with connections, testing and commissioning etc. as required.40
amps
3
-
-
2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole
15
-
-
2.13.1
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing
MCB DB complete with connections, testing and commissioning etc. as required.40
amps
10
-
-
2.11 : Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
20
-
-
2.14.1 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps
3
-
-
OD19385/2024-2025
Supplying and fixing FP sheet steel enclosure on surface/ recess along with 40A 415
volts Isolator complete with connections, testing and commissioning etc. as required
1
-
-
2.15.1 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps
9
-
-
2.15.2
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts,
residual
current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in
the existing MCB DB complete with connections, testing and commissioning etc. as
required.40 amps
1
-
-
2.23.3 : Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with testing and commissioning etc. as required. 2For 10 way, Double door SPN MCBDB
3
-
-
2.24.1 : Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.For 4 way, Double door TPN MCBDB
10
-
-
2.25 : Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for tripple pole and neutral, sheet steel, Vertical MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.
3
-
-
Cabling and accessories
-
-
-
90.12.6.2 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.
18
-
-
90.12.6.39
Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium
power cable of 1.1 KV grade of the following sizes in the existing masonry open duct
as required.4 core 6 sq mm
60
-
-
90.12.6.41 Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium
power cable of 1.1 KV grade of the following sizes in the existing masonry open duct
as required.4 core 16 sq mm
12
-
-
90.12.5.29
Supply & laying of one number PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/
HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 50 sq mm
10
-
-
90.12.5.41
Supply & laying of one number PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/
HUME / STONE WARE/ GI/ DWC pipe as required.4 core 16 sq mm
40
-
-
90.12.6.29
Supply & laying of one No. PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1 KV grade of the following sizes in the existing
masonry open duct as required.3.5 core 50 sq mm
10
-
-
90.12.6.30
Supply & laying of one No. PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1 KV grade of the following sizes in the existing
masonry open duct as required.3.5 core 70 sq mm
5
-
-
90.12.7.29
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.3.5 core 50 sq mm with factory made
clamp
30
-
-
90.12.7.30
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.3.5 core 70 sq mm
20
-
-
90.12.5.30
Supply & laying of one number PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/
HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 70 sq mm
40
-
-
90.12.7.2
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.2 core 6 sq mm with factory made clamp
46
-
-
90.12.7.39
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.4 core 6 sq mm with factory made clamp.
167
-
-
90.12.7.41 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.
30
-
-
9.1.1 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm)
6
-
-
OD18462/2024-2025
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.4 X 6 sq. mm (19mm)
20
-
-
9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)
2
-
-
9.3.19
Supplying and making straight through joint with cast resin compound including
ferrules and
other jointing materials for following size of PVC insulated and PVC sheathed /
XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 50 sq. mm
2
-
-
9.3.20
Supplying and making straight through joint with cast resin compound including
ferrules and
other jointing materials for following size of PVC insulated and PVC sheathed /
XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 70 sq. mm
2
-
-
90.12.1.12
Supply & laying of one number PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1KV grade of the following sizes in ground including
excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but
excluding sand cushioning and protective covering (in ordinary soil).3 core 4 sq mm
100
-
-
90.12.5.12
Supply & laying of one number PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/
HUME / STONE WARE/ GI/ DWC pipe as required.3 core 4 sq mm
700
-
-
90.12.7.12
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.3 core 4 sq mm with factory made clamp
100
-
-
7.10
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate
with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60
cm long and fixing the same in ground as required.
11
-
-
OD18463/2024-2025
Supply and installation of 4 sq mm to 16 sq mm. 60 mm long x 12 mm wide x 1 mm
thick Copper earthing clips for single compression glands and giving all connections
34
-
-
OD19378/2024-2025
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required 3 X 4 sq. mm (19mm)
255
-
-
Earthing and associated works
-
-
-
5.4 : Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and
providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
13
-
-
5.20
Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for
connections etc. as required.
5
-
-
90.16.1.2
Supply and drawing bare earthing conductors of the following sizes along with
wiring/ cables and giving connection as required2.65 mm copper conductor (12
SWG)
74
-
-
90.16.1.3 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required
758
-
-
90.12.10.2
Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including
excavation50/38 mm or nearest size
90
-
-
90.16.5.2
Supply of superior quality copper earth socket for the following size of earth
conductor including crimping etc. as required.2.65 mm (12 SWG)
6
-
-
90.16.5.3 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.
156
-
-
OD18452/2024-2025
Supply and fixing of copper earthing test joint including necessary hole drilling and
provision to connect earthing conductors. 20mm x 3 mm Cu tape completing with all
respects as required
13
-
-
90.16.1.4
Supply and drawing bare earthing conductors of the following sizes along with
wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG)
100
-
-
90.16.5.4
Supply of superior quality copper earth socket for the following size of earth
conductor including crimping etc. as required.4.00 mm (8 SWG)
8
-
-
90.16.3.9
Supply and clamping the following size of strips on surface of wall/ parapet/ existing
cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty
GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages,
colour washing etc. as required ( for horizontal run)25 x 3 mm copper strip
250
-
-
Safety Equipment
-
-
-
OD18453/2024-2025
Supplying and fixing Fire Extinguisher-ABC 5 Kg Type
4
-
-
OD18454/2024-2025
Supplying and fixing Fire Extinguisher-CO2 4.5 Kg Type
1
-
-
OD18455/2024-2025
Supplying and fixing 2.00 mm thick, 3.3 kV, Synthetic elastromeric fire retardant
insulating sheet
9.75
-
-
OD18456/2024-2025
Supply and fixing of 2 Nos fire buckets along with a stand painted with enamel paint
of red colour
1
-
-
LA and associated works
-
-
-
OD19406/2024-2025
Providing and fixing of IEC 62561 tested suitable cross connector, parallel connector,
expansion piece with connector (For equalizing temperature-related length changes)
to route horizontal conductor /mesh formation made of stainless steel. Tested from a
laboratory accredited by UL, KEMA or VDE
40
-
-
OD19409/2024-2025
8mm solid aluminum round conductor: For sheet ridge position conductor routing
application: Meets the technical specification according to . Meets the requirement of
IS/IEC 62305) RD 8/ALU: semi-hard (E-AlMgSiO5) With 50 sq. mm cross-sectional
area installed with Ridge conductor holder with tensioning spring - Stainless steel
Conductor holder <br>Conductor holder @ 1 meter distance. Tested from a
laboratory accredited by UL, KEMA, or VDE
32
-
-
OD19411/2024-2025
Application: Polycarbonate Sheet 8mm solid aluminum round conductor: For
concrete building Polycarbonate Sheet application: Meets the technical specification
according to .<br>Meets the requirement of IS/IEC 62305) RD 8/ALU: semihard
(E-AlMgSiO5) With 50 sq.mm cross-sectional area installed with Polyamide
Conductor holder with bonding base.With M8 female thread or diameter 7mm, M8
Screw to connect the conductor holder. Weather and temperature resistance from -35
to +90 degree Celsius were tested. Conductor holder @1 meter distance Bonding
Base: With threaded stem M8. For Mounting conductor supports with M8 female
thread. For bonding to concrete, steel, or brickwork. Tested from a laboratory
accredited by UL, KEMA, or VDE
1405
-
-
OD19518/2024-2025
Supply, installation, testing, and commissioning of combination arrester of the
following spec:Pole version 3+N/PE, Combination arrester, lightning and surge
arrester type 1+2, (Similar to OBO Combination arrester V25, 3-pole + NPE 385 V)
Make:OBO or equivalent spec PWD/KSCADC approved make )
6
-
-
LT panel board and energy meter chamber
-
-
-
OD19508/2024-2025
METERING BOARD WITH ISOLATION
Supply and labour charges for installation, testing &commissioning of 125A MV
cubical panel board, dust & vermin tight proof, powder coated front opening
type, cable bottom entry type, wall mounted using nuts & bolts, stencilling all
identification, etc.. Confirming to IS1863, IE rules
Incomer 1
125A 4P 25KA Thermomagnetic based MCCB with a variable setting with all
isolation duty -1No with 3 nos.100A porcelain cut-out fuse and provision for CT
metering. -1No
40A 4P MCB with provision for KWH metering-1 nos(solar)
All MCCBs are with rotary operating handles for door interlock.
Busbar :125A TPN Al/Cu busbar
1
-
-
OD19509/2024-2025
MSB:
Supply, Installation, Testing, and commissioning of 125A MV Cubicle panel.
Fabricated out of 16 swg CR CA sheet, powder coated dust and vermin tight proof,
front opening type, cable bottom entry flush, and floor mounted free standing on
4” MS channel directly bolted to the floor using nuts and bolts stencilling all
identification, etc.. confirming to IS1863, IE rules.
"Incomer
125A 4P 25 KA thermomagnetic type MCCB-1Nos125A 4P ISO -1Nos
125A 4P AC 3 duty contactor-2Nos
AMF relayˇ1Nos
Class B&C type-1,type-2 surge arrestor- 1 No.
Multifunction meter with cutout fuse-1 No.
RYB pilot lamp controlled with 2A MCBs- 2set
Electrical and mechanical interlocking shall be done
Outgoings
63A TP 18kA thermomagnetic type with variable
setting MCCB with all isolation duty -3Nos
40A TP 18kA thermomagnetic type with variable setting MCCB with all isolation
duty -5Nos<br>All MCCB must be rotary operated
Busbar :125A TPN Cu/Al busbar
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements