Kerala State Coastal Area Development Corporation Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 50,000Document Cost
₹ 5,900Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_SCADC_701843_2Tender No
ET-41/2024-25Tender Authority
Kerala State Coastal Area Development Corporation Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
20.6.1.2
Vertical load testing of piles in accordance with IS 2911( Part IV) including
installation of loading platform and preparation of pile head or construction of test
cap and dismantling of test cap after test etc. complete as per specification & the
direction of engineer -in-Charge.
Single pile upto 50 tonne capacityRoutine test
1
-
-
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means
in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift up to 1.5 m, including
getting out the excavated soil and disposal of surplus excavated soil as directed,
within a lead of 50 m.All kinds of soil
116.81
-
-
4.1.8
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4
coarse sand : 8 graded stone aggregate 40 nominal size)
55.4
-
-
2.34.1
Supplying chemical emulsion in sealed containers including delivery as
specified.Chlorpyriphos / Lindane emulsifiable concentrate of 20%
173.82
-
-
OD27773/2023-2024
Diluting and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti-termite
treatment (excluding the cost of chemical emulsion) Treatment of soil under existing
floors using
chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm
diameter holes With
Chlorpyriphos/Lindane E.C. 20% with 1% concentration -OD based on
2.35.3.1Details of cost for 9 sqm (3 metre x 3 metre)
No. of holes - 100 nos.
MATERIAL:
Chlorpyriphos 1% required
100x1 litre = 100 litres
Chlorpyriphos 20% E.C. = 100/20 = 5.0 litres
Chlorpyriphos 20% E.C./Lindane 20% E.C. 5 Litres (to be supplied free of cost)
LABOUR:
310.4
-
-
50.6.1.4
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm
or nearest available size confirming to IS 2185 part I of 1979 for foundation and
plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc
complete
14.95
-
-
50.6.2.1
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm
or nearest available size confirming to IS 2185 part I of 1979 for foundation and
plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
3.14
-
-
5.33.1
Providing and laying in position machine batched and machine mixed design mix M-
25 grade cement concrete for reinforced cement concrete work, using cement content
as per approved design mix, including pumping of concrete to site of laying but
excluding the cost of centering, shuttering, finishing and reinforcement, including
admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting
of concrete, improve workability without impairing strength and durability as per
direction of Engineer - in-charge. Note:- Cement content considered in this item is @
330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable
separately.All work upto plinth level
63.13
-
-
5.9.1 Centering and shuttering including strutting, etc. and removal of form
for:Foundations, footings, bases of columns, etc for mass
302.08
-
-
5.33.2
Providing and laying in position machine batched and machine mixed design mix M-
25 grade cement concrete for reinforced cement concrete work, using cement content
as per approved design mix, including pumping of concrete to site of laying but
excluding the cost of centering, shuttering, finishing and reinforcement, including
admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting
of concrete, improve workability without impairing strength and durability as per
direction of Engineer - in-charge. Note:- Cement content considered in this item is @
330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable
separately.All work above plinth level upto floor V level
52.81
-
-
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels,
beams, plinth beams, girders bressumers and cantilevers
273.47
-
-
5.9.19
Centering and shuttering including strutting, etc. and removal of form for:Weather
shade, Chajjas, corbels etc., including edges
1.62
-
-
5.9.3
Centering and shuttering including strutting, etc. and removal of form for:Suspended
floors, roofs, landings, balconies and access platform
176.32
-
-
5.9.16.1
Centering and shuttering including strutting, etc. and removal of form for:
Edges of slabs and breaks in floors and wallsUnder 20 cm wide
61.02
-
-
55.9.6
Centering and shuttering including strutting, etc. and removal of form for:Columns,
Pillars, Piers, Abutments, Posts and Struts
187.78
-
-
5.22.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete upto plinth levelThermo - Mechanically Treated
bars of grade Fe-500D or more
9440.98
-
-
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically
Treated bars of grade Fe-500D or more
8481.89
-
-
2.25
Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
81.47
-
-
50.2.25.1
Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of
foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction
of site Engineer-in-charge
104.94
-
-
50.6.3.2
Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm
or nearest available size confirming to IS 2185 part I of 1979 for super structure up to
floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including
cost of scaffolding complete
5.88
-
-
50.6.1.5
Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm
or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to
floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc
complete
47.53
-
-
OD28059/2023-2024
Providing and fixing powder coated 50 micron aluminium grill (dyed to required
shade
according to IS : 1868 with minimum anodic coating of grade AC 15) of approved
design/pattern, with
approved standard section and fixed to the existing window frame with C.P
brass/stainless steel screws @
200 mm centre to centre, including cutting the grill to proper opening size for fixing
and operation of handles and fixing approved powder coated aluminium standard
section around the opening, all complete as per requirement and direction of
Engineer-in-charge.(Only weight of grill to be measured for payment ).
204.8
-
-
21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions
with extruded built up standard tubular sections/ appropriate Z sections and other
sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash
fasteners of required dia and size, including necessary filling up the gaps at junctions,
i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointedmechanically wherever required including cleat angle, Aluminnium snap beading for
glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural
drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash
fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating
50 micron)
286.61
-
-
13.16.1
6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
521.34
-
-
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
583.29
-
-
22.6
Providing and laying water proofing treatment on roofs of slabs by applying cement
slurry mixed with water proofing cement compound consisting of applying : a) after
surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water
proofing cement compound @ 0.253 kg/ sqm. laying second layer of fibre glass cloth
when the first layer is still green. Overlaps of joints of fibre cloth should not be less
than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289
kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse
sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water
curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall
and tucked into groove in parapet all around. d) fourth and final layer of brick tilling
with cement mortar (which will be paid for separately. For the purpose of
measurement the entire treated surface will be measured)
176.32
-
-
13.43.1
Applying one coat of water thinnable cement primer of approved brand and
manufacture on wall surface:Water thinnable cement primer
577.36
-
-
13.83.2
Wall painting with premium acrylic emulsion paint of interior grade, having VOC
(Volatile including applying additional coats wherever required to achieve even shade
and colour.Two coats
577.36
-
-
13.46.1
Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two
or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior
primer applied @ 2.20 kg/10 sqm)
262.97
-
-
13.48.2
Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting wood work with Deluxe Multi
Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an
under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture
11.34
-
-
OD28147/2023-2024
:Providing and laying antiskid vitrified floor tiles in different sizes (thickness to be
specified by the manufacturer) with water absorption less than 0.08% and conforming
to IS : 15622, of
approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1
cement : 4 coarse sand),including grouting the joints with white cement and matching
pigments etc., complete.<br>Size of Tile 600 x600 mm
353.41
-
-
11.46.2
Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by
manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622,
of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick
bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with
white cement & matching pigments etc. complete.Size of Tile 600x600 mm
131.84
-
-
8.2.2.1
Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and
prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias
and similar locations, of required size, approved shade, colour and texture laid over
20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with
white cement, mixed with matching pigment, epoxy touch ups, including rubbing,
curing, moulding and polishing to edges to give high gloss finish etc. complete at all
levels.
Granite of any colour and shadeArea of slab upto 0.50 sqm
6.48
-
-
8.2.2.2
Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and
prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias
and similar locations, of required size, approved shade, colour and texture laid over
20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with
white cement, mixed with matching pigment, epoxy touch ups, including rubbing,
curing, moulding and polishing to edges to give high gloss finish etc. complete at all
levels.Area of slab over 0.50 sqm
3.44
-
-
10.1
Structural steel work in single section, fixed with or without connecting plate,
including cutting, hoisting, fixing in position and applying a priming coat of approved
steel primer all complete.
100.48
-
-
50.10.1
Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.)
trusses etc., including cutting, hoisting,fixing in position and applying a priming coat
of approved steel primer, including welding and bolted with special shaped washers
etc. complete
7429.01
-
-
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing
in position and applying a priming coat of approved steel primer, including welding
and bolted with special shaped washers etc. complete
1801.44
-
-
OD28197/2023-2024
Providing and fixing Corrugated bitumen sheets of size 2000mm x 1045mm
approximately and approved color reinforced with cellulosic fibers and thermosetting
resin , 3mm thick along with ridges & valleys.The roofing sheets shall be fixed
to the structural steel frame work to correct line and level with overlap 20 cm, side
overlap 1 corrugation, maximum purlin distance 45 cm. Fixing with Onduline make /
equivalent Speedy screws nominal diameter 4.2mm and Corrosion category screw
minimum 14 screws per sheet of matching sheet color complete as per manufactures
specifications and as per the direction of the Engineer in charge.
216
-
-
50.12.2.1
Providing & fixing Poly carbonate corrugated sheet 0.8 mm thick as approved by the
Engineer in charge and should be supplied in a single length of 12 M or as decide by
the Engineer in charge. The sheets shall be fixed using self drilling / self tapping
screw of size (5.5x55 mm) with EPDM seal complete upto any pitch in horizontal/
vertical/ curved surface, but excluding the cost of purlins, rafters, trusses, and
including cutting to size shapes where ever required.
24
-
-
10.28
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes,
channels, plates etc., including welding, grinding, buffing, polishing and making
curvature (wherever required) and fitting the same with necessary stainless steel nuts
and bolts complete, i/c fixing the railing with necessary accessories & stainless steel
dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the
side of waist slab with suitable arrangement as per approval of Engineer-in-charge,
(for payment purpose only weight of stainless steel members shall be considered
excluding fixing accessories such as nuts, bolts, fasteners etc.)
149.82
-
-
OD28213/2023-2024
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or
more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80
ltr/10 sqm of approved brand and manufacture excluding priming coat
315.03
-
-
9.117.1
Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness
2.0mm (±0.2 mm), corners of the door frame to be jointed with galvanized brackets
and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of
the frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1 mm (± 0.1
mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as
per manufacturer's specification and direction of Engineer-in-chargeExtruded section
profile size 48x40 mm
29.4
-
-
9.118.1
Providing and fixing to existing door frames24 mm thick factory made PVC door
shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall
thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails
mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size
75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of
the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm
(± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow
section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness,fixed to the shutter
styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a
uPVC multi-chambered single panel of size not less than 620 mm, having over all
thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically
and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and
fastened with nuts and washers, complete as per manufacturer's specification and
direction of Engineer-in-charge( For W.C. and bathroom door shutter).
8.82
-
-
10.6.1
543
SUB HEAD : 9 - WOOD & PVC WORK
9.147B
Providing and fixing factory made uPVC white colour fixed glazed windows/
ventilators comprising of uPVC multi-chambered frame and mullion (where ever
required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized
mild steel section made from roll forming process of required length (shape &
size according to uPVC profile), , uPVC extruded glazing beads of appropriate
dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished
wall, plastic packers, plastic caps and necessary stainless steel screws etc.
Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if
required) shall be also fusion welded including drilling of holes for fixing
hardware's and drainage of water etc. After fixing frame the gap between frame
and adjacent finished wall shall be filled with weather proof silicon sealant over
backer rod of required size and of approved quality, all complete as per approved
drawing & direction of Engineer-in-Charge. (Single / double glass panes and
silicon sealant shall be paid separately).
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance
in dimension i.e. in depth & width of profile shall be acceptable.Fixed window /
ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both
having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate
1.65
-
-
9.55.1
Supplying and fixing rolling shutters of approved make, made of required size M.S.
laths, interlocked together through their entire length and jointed together at the end
by end locks, mounted on specially designed pipe shaft with brackets, side guides and
arrangements for inside and outside locking with push and pull operation complete,
including the cost of providing and fixing necessary 27.5 cm long wire springs
manufactured from high tensile steel wire of adequate strength conforming to IS:
4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25
mm M.S. laths with 1.25 mm thick top cover
101.52
-
-
10.7
Providing and fixing ball bearing for rolling shutters.
20
-
-
OD27777/2023-2024
Extra for providing grilled rolling shutters manufactured out of 6mm dia M.S. bar
instead of laths as per design approved by Engineer -in-Charges, (area of grill to be
measured).
7.44
-
-
9.48.1
Providing and fixing M.S. Grills of required pattern in frames of windows etc. with
M.S. flats, square or round bars etc. including priming coat with approved steel
primer all complete.Fixed to steel windows by welding
24.75
-
-
13.52.1
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied
as per manufacturer's specifications including appropriate priming coat, preparation
of surface, etc. complete.On steel work
203.04
-
-
17.2.1
Providing and fixing white vitreous china pedestal type water closet (European type
W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including
flush pipe, with manually controlled device (handle lever), conforming to IS : 7231,
with all fittings and fixtures complete, including cutting and making good the walls
and floors wherever required:W.C. pan with ISI marked white solid plastic seat and
lid
3
-
-
17.1.1
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm
Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including
flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with
all fittings and fixtures complete, including cutting and making good the walls and
floors wherever require:White Vitreous china Orissa pattern W.C. pan of size
580x440 mm with integral type foot rests
1
-
-
17.10.1.3
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983
with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and
brackets, cutting and making good the walls wherever required:
Kitchen sink with drain board510x1040 mm bowl depth 200 mm
6
-
-
17.32.4
Providing and fixing mirror of superior glass ( of approved quality) and of required
shape and size with plastic moulded frame of approved make and shade with 6 mm
thick hard board backing :Rectangular shape 1500x450 mm
3
-
-
19.33
Constructing soak pit 1.20x1.20 m filled with brickbats including S.W. drain pipe 100
mm diameter and 1.20 m long complete as per standard design
2
-
-
OD27778/2023-2024
Supplying and installing Concrete ring of 1.20 m diameter with 7.5 cm thickness and
30
cm height including sinking the rings in all classes of soil including all cost of
conveyance, labour charges tools and plants and all other incidental charges etc.
complete.
7
-
-
OD27779/2023-2024
Providing and fixing FRP anaerobic septic tanks of size 1512 Lit volume
(2000x900x840 mm or near size) and 5 mm thick for 50 flush/users including all cost
of labour, transportation and installation as ordered by Engineer in charge
1
-
-
OD27780/2023-2024
Providing and Fixing stainless steel U shaped rail with anti slip coating (Wall
mounted
rail with hinge) 600 X 100mm including the cost of carriage and fixing as specified as
per the direction of
engineer in charge
Details of cost for 1.No
MATERIALS:
1
-
-
OD27781/2023-2024
Providing and Fixing Wall mounted stainless steel Grab bar 600mm long with anti
slip
coating including the cost of carriage and fixing as specified as per the direction of
engineer in charge
Details of cost for 1.No
MATERIALS:
2
-
-
18.17.1
Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed end) :25 mm nominal bore
3
-
-
18.17.2
Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed end) :32 mm nominal bore
3
-
-
18.51.1
Providing and fixing C.P. brass long body bib cock of approved quality conforming to
IS standards and weighing not less than 690 gms.15 mm nominal bore
20
-
-
18.58.2.1
Providing and fixing PTMT grating of approved quality and colour.
Rectangular type with openable circular lid150 mm nominal size square 100 mm
diameter of the inner hinged round grating
23
-
-
18.65
Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102
mm, height of 75 mm with concealed fittings arrangements, weighing not less than
106 gms.
23
-
-
18.65
Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102
mm, height of 75 mm with concealed fittings arrangements, weighing not less than
106 gms.
1
-
-
50.18.9.3.1
Providing and fixing PVC pipes includings jointing of pipes with one step PVC
solvent cement, trenching, refilling & testing of joints complete as per direction of
Engineer in Charge 25 mm dia 12Kfg/cm2
10
-
-
50.18.9.5.2
Providing and fixing PVC pipes includings jointing of pipes with one step PVC
solvent cement, trenching, refilling & testing of joints compete as per direction of
Engineer in Charge. 40 mm dia 6 Kgf/cm2
8
-
-
50.18.9.13.1
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm
dia 12 Kgf/ cm2- External work- exposed on wall
12
-
-
50.18.9.14.1
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm
dia 10 Kgf/cm2 - External work- Exposed on wall
10
-
-
50.18.9.15.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm
dia 6 Kgf/cm2 - External work - Exposed on wall
10
-
-
50.18.9.16.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm
dia 6Kgf/cm2 - External work - Exposed on wall
8
-
-
50.18.9.18.1
Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m
spacing. This included jointing of pipes with one step PVC solvent cement and testing
of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 -
External work- Exposed on wall
12
-
-
50.18.9.19.1
Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00
m spacing . This includes jointing of pipes with one step PVC solvent cement and
testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6
Kgf/cm2 - External work- Exposed on wall
10
-
-
50.18.9.22.1
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 110 mm dia Elbow
3
-
-
50.18.9.22.2
Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow
3
-
-
50.18.9.22.3
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement-110 mm dia Door Elbow
3
-
-
50.18.9.22.5
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes
including jointing with PVC solvent cement 110x110x110 mm dia Tee
3
-
-
50.17.1.3
Supplying and fixing CP Towel rod 60cm or nearest available length including cost of
materials and labour charges etc complete as per the direction of site Engineer-incharge.
23
-
-
50.17.1.4
Supplying and fixing CP Health faucet good quality including cost of materials and
labour charges etc. complete as per the direction of site engineer-in-charge.
3
-
-
50.18.8.3.1
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work, including cutting chases and making good the wall etc. 25 mm pipe
12 kgf/cm2
50
-
-
50.18.8.4.1
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work, including cutting chases and making good the wall etc. 32 mm pipe
10Kgf/cm2
50
-
-
50.18.8.5.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work, including cutting chases and making good the wall etc. 40 mm pipe
6Kgf/cm2
30
-
-
50.18.8.6.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work, including cutting chases and making good the wall etc. 50 mm pipe
6 kgf/cm2
50
-
-
50.18.9.7.1
Providing and fixing PVC pipes includings of pipes with one step PVC solvent
cement, trenching refilling & testing of joints complete as per direction of Engineer in
Charge. 63 mm dia 6Kgf/cm2
30
-
-
50.18.9.9.1
Providing and fixing PVC pipes includings jointing of pipes with one step PVC
solvent cement, trenching, refilling & testing of Joints complete as per direction of
engineer in charge.110 mm dia 6Kgf/cm2
102
-
-
18.18.3
Providing and fixing ball valve (brass) of approved quality, High or low pressure,
with plastic floats complete:25 mm nominal bore
1
-
-
18.48
Providing and placing on terrace (at all floor levels) polyethylene water storage tank
:ISI 12701 marked, with cover and suitable locking arrangement and making
necessary holes for inlet, outlet and overflow pipes but without fittings and the base
support for tank.
4000
-
-
OD881/2024-2025
Polyethylene water storage tank with cover and suitable locking arrangement for rain
water harvesting
2000
-
-
OD884/2024-2025
OD- providing and fixing wall mounted vertical self cleaning rain water harvesting
filter of HDPE filter housing with SS-304 filter element of maximum flow rate 120
liters per minute including the cost of carriage and fixing as specified as per the
direction of engineer in charge.
1
-
-
23.1.1.1
Boring / drilling bore well of required dia for casing / strainer pipe, by suitable
method prescribed in IS: 2800 ( part I), including collecting samples from different
strata, preparing and submitting strata chart/ bore log, including hire & running
charges of all equipments, tools plants & machineries required for the job, all
complete as per direction of Engineer - in- Charge, upto 90 metre depth below ground
level.
All types of soil300 mm dia
40
-
-
23.3.3
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS :
12818, including required hire and labour charges, fittings & accessories etc. all
complete, for all depths, as per direction of Engineer- in- Charge.200 mm nominal
size dia
40
-
-
OD36405/2023-2024
Providing suplying and installation of Borewell Submersible Pump-1.5HP water
cooling with 6mm dia ss rop including all accessories, fittings etc complete of
approved IS make as per design and drawings and dievtion of Engineer-at-site.
1
-
-
OD36406/2023-2024
Providing , supply and fixing Y STAINER- 50mm dia including all fittings and
accessories of approved IS make etc complete as per design and drawings
1
-
-
12.41.2
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes
conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :
5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm
diameter
76
-
-
OD27782/2023-2024
Supply and installation of 160mm pipe including all accessorries and fittings of
approved IS make etc complete as per design ,drawing and the direction of Engineerat-
site External
drainage pipe
40
-
-
OD27783/2023-2024
Supply and fixing of 110mm dia pipe including all accessories and fittings of
approved IS make etc. complete as per design ,drawing and the direction of Engineerat-
site External drainage pipe
20
-
-
OD27784/2023-2024
Providing , supply and fixing Open well submersible pump-1.5HP including all
fittings
and accessories of approved IS make etc complete as per design and drawings
1
-
-
18.19.3.1
Providing and fixing gun metal non-return valve of approved quality (screwed end):
40 mm nominal boreHorizontal
1
-
-
18.19.3.2
Providing and fixing gun metal non-return valve of approved quality (screwed end): 40 mm nominal boreVertical
1
-
-
OD27787/2023-2024
Supplying Stainless steel insulated fish box and trolley of size 60x50x75+90 cm with
40mm square tube frame work 20 SWG thick stainless steel sheet of 304 grade top
and bottom shelf, teakwood chopping board of 60mm thick etc. complete as per
drawing and instructions of engineer in charge.
6
-
-
OD27788/2023-2024
:Supplying Stainless steel insulated display trolley of size 180x90x75+90 cm with
40mm square tube frame work 20 SWG thick stainless steel sheet of 304 grade 4mm
thick transparent openable cover at top and fixed wall at sides above the middle shelf,
stainless steel sides below the middle shelf, insulating the sides of top display cabin
provision for grating, liquid collection tray etc complete as per drawing and
instructions of engineer in charge
4
-
-
OD27789/2023-2024
Supplying Stainless steel insulated display trolley of size 140x90x75+90 cm with
40mm square tube frame work 20 SWG thick stainless steel sheet of 304 grade 4mm
thick transparent openable cover at top and fixed wall at sides above the middle shelf,
stainless steel sides below the middle shelf, insulating the sides of top display cabin
provision for SS zinc grating, liquid collection tray etc. complete as per drawing and
instructions of engineer in charge.
5
-
-
OD36408/2023-2024
Supplying stainless steel insulated display trolley of size 120x70x75+90 cm with
40mm square tube frame work 20 SWG thick stainless steel sheet of 304 grade 4mm
thick transparent openable cover at top and fixed wall at sides above the middle shelf,
stainless steel sides below the middle shelf, insulating the top display cabin provision
for grating, liquid collection tray etc. complete as per drawing and instruction of
engineer in charge.
7
-
-
OD27790/2023-2024
Providing FRP (Fibre Reinforced Plastic) grating- grills spacing not more than 5cm.,
thickness of grill not less than 4cm and grill member thickness not less than 4mm
including all cost,
conveyance and labour charges etc. complete.
Quantity required for 1sqm including 5 % wastage= 1.05 sqm
4.2
-
-
16.91.2
Providing and laying factory made chamfered edge Cement Concrete paver blocks
in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,
thickness & size/ shape, made by table vibratory method using PU mould, laid in
required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer
through vibratory compaction by using plate vibrator, filling the joints with sand and
cutting of paver blocks as per required size and pattern, finishing and sweeping
extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C.
paver block of M-30 grade with approved color design and pattern.
320
-
-
17.7.1
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32
mm C.P. brass waste of standard pattern, including painting of fittings and brackets,
cutting and making good the walls wherever require:White Vitreous China Wash
basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
3
-
-
17.28.1.2
Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC.
waste fittings complete.
Semi rigid pipe40 mm dia
9
-
-
17.31
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved
quality) complete with 6 mm thick hard board ground fixed to wooden cleats with
C.P. brass screws and washers complete.
5
-
-
19.4.1.1
Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I.
grating brick masonry chamber with water tight C.I. cover with frame of 300x300
mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not
less than 2.70 kg as per standard design:
100x100 mm size P typeWith common burnt clay F.P.S. (non modular) bricks of
class designation 7.5
23
-
-
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade:Two or more coats on new work
6
-
-
13.71
Lettering with black Japan pint of approved brand and manufacture
3000
-
-
16.21
Engraving letters in hard stone
1500
-
-
OD27791/2023-2024
Providing and fixing computerised numerical control cut letters using 18 mm thick
multi wood for name board of fish market including all materials as per direction of
engineer in charge etc.
complete
7.2
-
-
OD27792/2023-2024
Supplying and fixing furnace capable of solid sanitary waste disposal. Portable,
odorless during operation and no recurring expenditure in future. Furnace should be
of with high quality stainless steel sheet not less than one mm thick. which can
withstand high temperature ranging 420-800 degree. It should not require fuel or
electricity to operate. Furnace to be properly fixed together with its stand and can be
carried with a handle provided on side. Inside temperature change would not affect
the handle. Height of furnace is 120 cm and top width is 38.10cm.
1
-
-
Appendic B: Electrification Conduit laying and associated works
-
-
-
1.21.1
Supplying and fixing of following sizes of medium class PVC conduit along with
accessories in surface/ recess including cutting the wall and making good the same in
case of recessed conduit as required.20 mm
250
-
-
1.21.2
Supplying and fixing of following sizes of medium class PVC conduit along with
accessories in surface/ recess including cutting the wall and making good the same in
case of recessed conduit as required.25 mm
100
-
-
1.21.3
Supplying and fixing of following sizes of medium class PVC conduit along with
accessories in surface/ recess including cutting the wall and making good the same in
case of recessed conduit as required.32 mm
5
-
-
1.21.5
Supplying and fixing of following sizes of medium class PVC conduit along with
accessories in surface/ recess including cutting the wall and making good the same in
case of recessed conduit as required.50 mm
5
-
-
Wiring and Accessories
-
-
-
1.14.1
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of
FRLS PVC insulated copper conductor, single core cable in surface / recessed
medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire
120
-
-
1.10.3
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm
FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC
conduit,
with modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C
114
-
-
1.17.3
Supplying and drawing following sizes of FRLS PVC insulated copper conductor,
single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X
1.5 sq.mm
250
-
-
1.17.12
Supplying and drawing following sizes of FRLS PVC insulated copper conductor,
single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x
2.5 sq. mm
100
-
-
1.17.21
Supplying and drawing following sizes of FRLS PVC insulated copper conductor,
single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x
4 sq. mm
60
-
-
1.24.1
Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as required.5/6
amps switchl
14
-
-
1.24.4
Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as required.3
pin 5/6 amp socket outlet
14
-
-
1.26
Supplying and fixing modular blanking plate on the existing modular plate & switch
box excluding modular plate as required
50
-
-
1.31
Supplying and fixing suitable size GI box with modular plate and cover in front on
surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket
outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be
used in non residential buildings).
6
-
-
1.32
Supplying and fixing suitable size GI box with modular plate and cover in front on
surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular
socket outlet and 15/16 amps modular switch, connection etc. as required
11
-
-
1.56
Supplying and fixing suitable size Gl box with modular plate and cover in front on
surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket
outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light
plugs to be used in non residential buildings).
10
-
-
2.16
Supplying and fixing DP sheet steel enclosure on surface/ recess along with
25/32amps 240 volts "C" curve DP MCB complete with connections, testing and
commissioning etc. as required.
1
-
-
90.6.6.2
Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core
copper conductor flat cable for submersible pump motor conforming to IS 694 part I
1990 as required including giving necessary connections of the following sizes.2.50
sq mm
60
-
-
90.10.3.15
Supply and Fixing the following modular switches & accessories in the existing front
plates and giving necessary connections as required (RoHS compliant )32A DP
switch with indicator
6
-
-
90.10.3.32
Supply and Fixing the following modular switches & accessories in the existing front
plates and giving necessary connections as required (RoHS compliant )25A 3 pin
plug top with indicator
6
-
-
90.10.3.33
Supply and Fixing the following modular switches & accessories in the existing front
plates and giving necessary connections as required (RoHS compliant )25A 3pin
Shuttered socket
6
-
-
90.14.28.12
S & F Motor starters of the following ratingsSubmersible pump controllers with
ammeter,DPMCB for single phase 1.5 HP submersible motor pumps (DOL)
1
-
-
OD29608/2023-2024
Supply and fixing of ferrules on the wire for circuit identification, as required (Any
make approved by CPWD/KPWD/KSCADC)
1.5 to 2.5sqmm wire
90
-
-
OD29609/2023-2024
Supply and fixing of connector bar (including connection of wires 1.5 to 10sqmm) for
loop circuit connections or as required in an establishment of circuit connection (Any
make approved by CPWD/KPWD/KSCADC)
16mm
45
-
-
Fittings and installations
-
-
-
90.3.7
Supplying and providing extra steel chain (16 SWG) 2 x 1.00 m long with 16/0.20
mm 3 core copper conductor flex wire conforming to relevant ISS or with the
extended original wiring and giving connection etc. as required.
16
-
-
90.3.20.3
Supply & installation of light fittings on TW round block
Supply, conveyance installation testing and commissioning the light fittings of
following types made of CRCA with 0.5mm thickness complete with all accessories
and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit
the fitting and giving connection with required length of 16/0.20mm 3 core copper
conductor flex wire conforming to relevant ISS and giving connections as
required.1200 mm 1X20W LED Lamp with box type fixture
1
-
-
90.3.20.4
Supply & installation of light fittings on TW round block
Supply, conveyance installation testing and commissioning the light fittings of
following types made of CRCA with 0.5mm thickness complete with all accessories
and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit
the fitting and giving connection with required length of 16/0.20mm 3 core copper
conductor flex wire conforming to relevant ISS and giving connections as
required.1200 mm 2X20W LED Lamp with box type fixture
26
-
-
1.33
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden
block including connection etc as required.
103
-
-
1.48
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia,
heavy gauge including painting etc. as required. (Note : More than 5 cm length shall
be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
36
-
-
1.49
Numbering of ceiling fan / exhaust fan/ fluorescent fittings as required.
114
-
-
1.51
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes
3
-
-
90.4.1
Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per
IS 732 as required
18
-
-
90.4.10
Conveyance, installation , testing and commissioning of exhaust fans of size up to
450mm in the existing opening, fixing necessary anchor bolts / bolt and nuts etc., as
required including giving connections with the supplied wire along with the exhaust
fan.
3
-
-
90.6.5.9
Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC
sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS
694 part I 1960 in the existing surface / recess conduit as required including giving
necessary connections of the following sizes.3 core 0.75 sq mm
59.7
-
-
90.15.4.2
Supply Conveyance, installation, testing and commissioning of 36/40W LED street
light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip
make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal
surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated
housing,acrylic cover complete with THD less than 10%, power factor greater than
0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver
compartment should be seperatly accessible for maintenance (LM 79&80 certificates
from NABL accredited Third party lab to be produced mentioning chip manufacturer)
4
-
-
OD29616/2023-2024
Supply and fixing of Angle holder or pendent type with 15w LED lamp.Including
Lamp Shade. (Make:-Anchor or any better-approved make(approval should be
submitted to the department if necessary )
27
-
-
OD29617/2023-2024
Supply and fixing of bulk-head light fittings of the reputed company make, with
clear/frosted glass cover, 10-Watt LED Bulkhead, Lumen : 850 Lm, Power : 10 W,
Color Temperature : 6500 K, IP-65 rating, similar to Bajaj Ivora 10-Watt LED
Bulkhead. (Make: Bajaj/Philips/Havells/wipro/Crompton
4
-
-
OD29618/2023-2024
Supply, installation, testing and commissioning of 12W down lighter, Surface Mount 12-Watt Round LED Slim Panel Light, Aluminum Powder Coated body finish,
Voltage: 240 VAC, Shape:Round.
25
-
-
OD29619/2023-2024
Supply of 300/305 mm sweep Light Duty Exhaust fan in metal frame working on 230
V A/C to site.
3
-
-
OD29620/2023-2024
Supply, installation, testing, and commissioning of the following sweep ceiling fan,
including wiring the down rods of standard length (up to 30 cm) with 3-core flexible
Copper round cable, etc. as required. (a) 1200 mm sweep ceiling fan with steppedtype
electronic fan regulator, brand approved by the engineer in charge
18
-
-
OD29621/2023-2024
Supply of vertical open well submersible pump having a capacity of 1.5 hp, 9-stage
1
-
-
Cabling and accessories
-
-
-
90.12.6.2
Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium
power cable of 1.1 KV grade of the following sizes in the existing masonry open duct
as required.2 core 6 sq mm
34
-
-
90.12.6.39
Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium
power cable of 1.1 KV grade of the following sizes in the existing masonry open duct
as required.4 core 6 sq mm
17
-
-
90.12.6.41
Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium
power cable of 1.1 KV grade of the following sizes in the existing masonry open duct
as required.4 core 16 sq mm
6
-
-
90.12.7.2
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.2 core 6 sq mm with factory made clamp
89
-
-
90.12.7.39
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.4 core 6 sq mm with factory made clamp
57
-
-
90.12.7.41
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp
5
-
-
90.12.5.39
Supply & laying of one number PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/
HUME / STONE WARE/ GI/ DWC pipe as required.4 core 6 sq mm
45
-
-
9.1.1
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.2 X 6 sq. mm (19mm)
12
-
-
OD29622/2023-2024
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.4 X 6 sq. mm (19mm)
6
-
-
9.1.33
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.4 X 16 sq. mm (28mm)
2
-
-
7.10
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate
with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60
cm long and fixing the same in ground as required.
11
-
-
OD29623/2023-2024
Supply and installation of 4 sq mm to 16 sq mm. 60 mm long x 12 mm wide x 1 mm thick Copper earthing clips for single compression glands and giving all connections.
20
-
-
DB and accessories
-
-
-
90.11.1.18
Supply and installation of sheet steel, phosphatised and painted, dust and vermin
proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus
and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable
anchor bolts or fixed in recess including cutting hole on the wall , making good the
damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical
DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP
42/43)
1
-
-
90.14.10.3
Supply, conveyance and fixing the following types & current rated control gears &
switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the
existing panel assembly as required.16 A-100A, 16 kA (Ics=100%Icu), 4 pole, current
limiting type MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL
1
-
-
90.11.1.11
Supply and installation of sheet steel, phosphatised and painted, dust and vermin
proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus
and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable
anchor bolts or fixed in recess including cutting hole on the wall , making good the
damages, colour washing etc. as required6 way (8+18) - three phase double cover (IP
42/43)
2
-
-
2.3.3
Supplying and fixing following way, single pole and neutral, sheet steel, MCB
distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar,
neutral bus bar, earth bar, din bar, interconnections, powder painted including
earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door
6
-
-
2.10.1
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature
circuit breaker suitable for inductive load of following poles in the existing MCB DB
complete with connections, testing and commissioning etc. as required.Single pole
87
-
-
2.12.1
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing
MCB DB complete with connections, testing and commissioning etc. as required.40
amps
6
-
-
2.10.4
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature
circuit breaker suitable for inductive load of following poles in the existing MCB DB
complete with connections, testing and commissioning etc. as required.Triple pole
5
-
-
2.13.1
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing
MCB DB complete with connections, testing and commissioning etc. as required.40
amps
2
-
-
2.11
Supplying and fixing single pole blanking plate in the existing MCB DB complete
etc. as required.
3
-
-
2.14.1
Supplying and fixing following rating, double pole, (single phase and neutral), 240
volts, residual
current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in
the existing MCB DB complete with connections, testing and commissioning etc. as
required.25 amps
6
-
-
2.15.1
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts,
residual
current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in
the existing MCB DB complete with connections, testing and commissioning etc. as
required.25 amps
2
-
-
2.23.3
Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following
single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/
recess, complete with testing and commissioning etc. as required. 2For 10 way,
Double door SPN MCBDB
6
-
-
2.24.2
Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following
triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess,
complete with testing and commissioning etc. as required.For 6 way, Double door
TPN MCBDB
2
-
-
2.25
Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for tripple
pole and neutral, sheet steel, Vertical MCB distribution board, 415 V, on surface/
recess, complete with testing and commissioning etc. as required.
1
-
-
LT Panel board and accessories
-
-
-
90.14.1.2
Fabrication, supply, conveyance, installation testing and commissioning of floor or
wall mounting, dust and vermin proof, cubicle type MV panel board comprising of
the following components/ devices & complying to IS 8623.
Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly
as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved
design and requirement, with front and rear access facility, bus bar chambers, hinged
doors for all switch gear compartments, earthing the doors using 4 sq mm braided
copper conductor, providing necessary cut-outs for mounting meters, relays,
indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber
and cable alley, powder coating the assembly after subjecting to 7 tank process etc as
required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles
etc shall not be used for the fabrication of panel assembly. The measurments will be
taken the area of the complete sheets used for panel board including partitions,
folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA
sheet, powder coated (excluding base frame)
15
-
-
90.14.2.1
Supply and providing 2mm SMC sheet as shrouding for bus interconnection /
terminations etc. including required nut & bolt etc.
0.5
-
-
90.14.3.2
Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU'
section rubber beeding suitable for 1.60/ 2.00 mm sheet
40
-
-
90.14.5
Supply and fabrication conveyance and installation of angle iron frame work for wall
mounting panel board
35
-
-
90.14.6
Supply and providing copper bus bars including finger type SMC bus bar supports in
the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as
required.
1500
-
-
90.14.7
Supply and providing copper earth bus in the panel board
200
-
-
90.14.10.3
Supply, conveyance and fixing the following types & current rated control gears &
switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the
existing panel assembly as required.16 A-100A, 16 kA (Ics=100%Icu), 4 pole, current
limiting type MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL
1
-
-
90.14.11.13
MCCB AccessoriesSupply and fixing rotary handle, External type (including BUC
handle with door interlock ) in the existing MCCB of rating up to 250 A
1
-
-
2.12.1
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing
MCB DB complete with connections, testing and commissioning etc. as required.40
amps
6
-
-
2.21
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild
steel, at least 2 mm thick, and vitreous enameled white on both sides, and with
inscription in single red colour on front side as required.
1
-
-
2.13.1
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing
MCB DB complete with connections, testing and commissioning etc. as required.40
amps
1
-
-
OD29611/2023-2024
Supply and installation of 20A, HRC Fuse Base with HRC Fuse link in the existing
enclosure and giving all necessary connections.
6
-
-
OD29612/2023-2024
Supply and installation of 32A, HRC Fuse Base with HRC Fuse link in the existing
enclosure and giving all necessary connections.
3
-
-
OD29613/2023-2024
Supply and installation of 32A, 2 Way neutral links mounted on DMC/SMC base in
the existing enclosure and giving all necessary connections
7
-
-
OD29614/2023-2024
Supply installation, testing, and commissioning of multifunction meter to read:V, A,
F , 3 phase accuracy class 0.5
1
-
-
OD29615/2023-2024
Supply and installation of 3 number (RYB) LED indicator, AC/DC on existing panel
board and giving all connection and made functional.
1
-
-
Earthing and associated works
-
-
-
5.4
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including
accessories, and providing masonry enclosure with cover plate having locking
arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as
required.
3
-
-
5.20
Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for
connections etc. as required.
3
-
-
90.16.1.2
Supply and drawing bare earthing conductors of the following sizes along with
wiring/ cables and giving connection as required2.65 mm copper conductor (12
SWG)
138
-
-
90.16.1.3
Supply and drawing bare earthing conductors of the following sizes along with
wiring/ cables and giving connection as required3.15 mm copper conductor ( 10
SWG)
234
-
-
90.12.10.2
Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including
excavation50/38 mm or nearest size
90
-
-
90.16.5.2
Supply of superior quality copper earth socket for the following size of earth
conductor including crimping etc. as required.2.65 mm (12 SWG)
12
-
-
90.16.5.3
Supply of superior quality copper earth socket for the following size of earth
conductor including crimping etc. as required.3.15 mm (10 SWG)
58
-
-
OD31756/2023-2024
Supply and fixing of copper earthing test joint including necessary hole drilling and
provision to connect earthing conductors. 20mm x 3 mm Cu tape completing with all
respects as required
3
-
-
Safety equipment
-
-
-
OD29624/2023-2024
Supplying and fixing Fire Extinguisher-ABC 5 Kg Type
4
-
-
OD29625/2023-2024
Supplying and fixing Fire Extinguisher-CO2 4.5 Kg Type
1
-
-
OD29626/2023-2024
Supplying and fixing 2.00 mm thick, 3.3 kV, Synthetic elastromeric fire retardant
insulating sheet
5
-
-
OD29627/2023-2024
Supply and fixing of 2 Nos fire buckets along with a stand painted with enamel paint
of red colour
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%