Kerala State Coastal Area Development Corporation Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 2,00,000Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_SCADC_688816_2Bid Award Id
ViewTender No
ET-25/2024-25 (PQ)Tender Authority
Kerala State Coastal Area Development Corporation Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
15.23.2 Dismantling tile work in floors and roofs laid in cement mortar including stacking
material within 50 metres lead.For thickness of tiles above 25 mm and up to 40 mm
148.61
-
-
2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means
in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift up to 1.5 m, including
getting out the excavated soil and disposal of surplus excavated soil as directed,
within a lead of 50 m.All kinds of soil
23.51
-
-
4.1.8 Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4
coarse sand : 8 graded stone aggregate 40 nominal size)
19.59
-
-
4.1.5 Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3
coarse sand : 6 graded stone aggregate 20 mm nominal size)
4.26
-
-
4.1.3 Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse
sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
0.93
-
-
4.2.3 Providing and laying cement concrete in retaining walls, return walls, walls ( any
thickness) including attached pilasters, columns, piers, abutments, pillars, posts,
struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks,
plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost
of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size)
1.76
-
-
5.33.1 Providing and laying in position machine batched and machine mixed design mix M25 grade cement concrete for reinforced cement concrete work, using cement content
as per approved design mix, including pumping of concrete to site of laying but
excluding the cost of centering, shuttering, finishing and reinforcement, including
admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting
of concrete, improve workability without impairing strength and durability as per
direction of Engineer - in-charge. Note:- Cement content considered in this item is @
330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable
separately.All work upto plinth level
0.11
-
-
5.22.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete upto plinth levelThermo - Mechanically Treated
bars of grade Fe-500D or more
8.48
-
-
5.9.1 Centering and shuttering including strutting, etc. and removal of form
for:Foundations, footings, bases of columns, etc for mass concrete
40.04
-
-
5.9.2 Centering and shuttering including strutting, etc. and removal of form for:Walls (any
thickness) including attached pilasters, butteresses, plinth and string courses etc.
35.2
-
-
50.6.1.4 Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm
or nearest available size confirming to IS 2185 part I of 1979 for foundation and
plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc
complete
4.79
-
-
50.6.2.1 Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm
or nearest available size confirming to IS 2185 part I of 1979 for foundation and
plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
0.47
-
-
50.6.2.2 Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or
nearest available size confirming to IS 2185 part I of 1979 for super structure up to
floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc
complete
23.87
-
-
OD1235/2024-2025 Providing and laying antiskid vitrified floor tiles in different sizes (thickness to be
specified by the manufacturer) with water absorption less than 0.08% and conforming
to IS : 15622, of
approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1
cement : 4 coarse sand), including grouting the joints with white cement and
matching pigments etc., complete. Size of Tile 600 x 600 mm
318.87
-
-
11.46.2 Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by
manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622,
of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick
bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with
white cement & matching pigments etc. complete.Size of Tile 600x600 mm
100
-
-
11.20.2 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard,
jointed with neat cement slurry mixed with pigment to match the shade of tiles,
including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar
1:4 ( 1 cement : 4 coarse sand).Medium shade pigment using 50% white cement 50 %
Grey cement
27.5
-
-
8.2.2.2 Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and
prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias
and similar locations, of required size, approved shade, colour and texture laid over
20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with
white cement, mixed with matching pigment, epoxy touch ups, including rubbing,
curing, moulding and polishing to edges to give high gloss finish etc. complete at all
levels.Area of slab over 0.50 sqm
7.02
-
-
17.2.1
Providing and fixing white vitreous china pedestal type water closet (European type
W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including
flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls
and floors wherever required:W.C. pan with ISI marked white solid plastic seat and
lid
3
-
-
17.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32
mm C.P. brass waste of standard pattern, including painting of fittings and brackets,
cutting and making good the walls wherever require:White Vitreous China Wash
basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
7
-
-
17.32.4 Providing and fixing mirror of superior glass ( of approved quality) and of required
shape and size with plastic moulded frame of approved make and shade with 6 mm
thick hard board backing :Rectangular shape 1500x450 mm
7
-
-
18.52.1
Providing and fixing C.P brass stop cock ( concealed) of standard design and of
approved make conforming to IS: 893115 mm nominal bore
1
-
-
50.17.1.4 Supplying and fixing CP Health faucet good quality including cost of materials and
labour charges etc. complete as per the direction of site engineer-in-charge
3
-
-
50.17.1.3 Supplying and fixing CP Towel rod 60cm or nearest available length including cost of
materials and labour charges etc complete as per the direction of site Engineer-incharge.
3
-
-
18.65 Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102
mm, height of 75 mm with concealed fittings arrangements, weighing not less than
106 gms
7
-
-
18.51.1 Providing and fixing C.P. brass long body bib cock of approved quality conforming to
IS standards and weighing not less than 690 gms.15 mm nominal bore
9
-
-
17.10.1.3 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983
with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and
brackets, cutting and making good the walls wherever required:
Kitchen sink with drain board510x1040 mm bowl depth 200 mm
2
-
-
9.117.1 Providing and fixing factory made uPVC door frame made of uPVC extruded
sections having an overall dimension as below (tolerance ±1 mm), with wall
thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with
galvanized brackets and stainless steel screws, joints mitred and plastic welded. The
hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19
mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges
fixed to the frame complete as per manufacturer's specification and direction of
Engineer-in-chargeExtruded section profile size 48x40 mm
76.5
-
-
9.118.1 Providing and fixing to existing door frames24 mm thick factory made PVC door
shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall
thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and
rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of
size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles
of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1
mm (± 0.1 mm) wall thickness. The lock rail made up of 'H'
section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm)
wall thickness,fixed to the shutter styles by means of plastic/galvanised M.S.
'U' cleats. The shutter frame filled with a uPVC multi-chambered single
panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm
(± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two
places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and
washers, complete as per manufacturer's specification and direction of
Engineer-in-charge( For W.C. and bathroom door shutter).
22.68
-
-
9.97.5 Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not
less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade,
with necessary screws complete:100x10 mm
26
-
-
9.103 Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI
marked, with six levers and a pair of anodised (anodic coating not less than grade AC
10 as per IS: 1868) aluminium lever handles of approved quality with necessary
screws etc . complete
13
-
-
9.147B.1 543
SUB HEAD : 9 - WOOD & PVC WORK
9.147B
Providing and fixing factory made uPVC white colour fixed glazed windows/
ventilators comprising of uPVC multi-chambered frame and mullion (where ever
required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick
galvanized
mild steel section made from roll forming process of required length (shape &
size according to uPVC profile), , uPVC extruded glazing beads of appropriate
dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished
wall, plastic packers, plastic caps and necessary stainless steel screws etc.
Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if
required) shall be also fusion welded including drilling of holes for fixing
hardware's and drainage of water etc. After fixing frame the gap between frame
and adjacent finished wall shall be filled with weather proof silicon sealant over
backer rod of required size and of approved quality, all complete as per approved
drawing & direction of Engineer-in-Charge. (Single / double glass panes
and
silicon sealant shall be paid separately).<br>
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance
in dimension i.e. in depth & width of profile shall be acceptable.Fixed window /
ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both
having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate
dimension. (Area upto 0.75 sqm.)
1.32
-
-
9.147D.1 Providing and fixing factory made uPVC white colour sliding glazed window upto
1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built
roller track and sash extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick
galvanized mild steel section made from roll forming process of required length
(shape & size according to uPVC profile), appropriate dimension of uPVC
extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc
alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon
rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing
frame to finished wall and necessary stainless steel screws etc. Profile of frame
& sash shall be mitred cut and fusion welded at all corners, including drilling of
holes for fixing hardware's and drainage of water etc. After fixing frame the gap
between frame and adjacent finished wall shall be filled with weather proof silicon
sealent over backer rod of required size and of approved quality, all complete as per
approved drawing & direction of Engineer-in-Charge. (Single / double glass
panes, wire mesh and silicon sealent shall be paid separately)
Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension
i.e. in depth & width of profile shall be acceptable.Two track two panels sliding
window made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both
having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate
dimension. (Area of window upto 1.75 sqm)
6.75
-
-
9.147D.3 Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built
roller track and sash extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick
galvanized mild steel section made from roll forming process of required length
(shape & size according to uPVC profile), appropriate dimension of uPVC
extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc
alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon
rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame
& sash shall be mitred cut and fusion welded at all corners, including drilling of
holes for fixing hardware's and drainage of water etc. After fixing frame the gap
between frame and adjacent finished wall shall be filled with weather proof silicon
sealent over backer rod of required size and of approved quality, all complete as per
approved drawing & direction of Engineer-in-Charge. (Single / double glass
panes, wire mesh and silicon sealent shall be paid separately)
Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension
i.e. in depth & width of profile shall be acceptable.Two track two panels sliding
window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having
wall thickness of 2.3 +/- 0.2 mm and single glazing bead / double glazing bead of
appropriate dimension . (Area of window above 1.75 sqm upto 2.50 sqm).
14.18
-
-
21.3.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the
architectural drawings and the directions of Engineer - in -Charge. ( Cost of
aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm
thickness
17.55
-
-
13.1.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
282.81
-
-
13.43.1 Applying one coat of water thinnable cement primer of approved brand and
manufacture on wall surface:Water thinnable cement primer
874.77
-
-
13.83.2 Wall painting with premium acrylic emulsion paint of interior grade, having VOC
(Volatile including applying additional coats wherever required to achieve even shade
and colour.Two coats
874.77
-
-
13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two
or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior
primer applied @ 2.20 kg/10 sqm)
360
-
-
10.1 Structural steel work in single section, fixed with or without connecting plate,
including cutting, hoisting, fixing in position and applying a priming coat of approved
steel primer all complete.
359.37
-
-
50.10.1 Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.)
trusses etc., including cutting, hoisting,fixing in position and applying a priming coat
of approved steel primer, including welding and bolted with special shaped washers
etc. complete
1682.25
-
-
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing
in position and applying a priming coat of approved steel primer, including welding
and bolted with special shaped washers etc. complete
4870.01
-
-
9.48.1 Providing and fixing M.S. Grills of required pattern in frames of windows etc. with
M.S. flats, square or round bars etc. including priming coat with approved steel
primer all complete.Fixed to steel windows by welding
1873.15
-
-
10.25.1 Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting,
fixing in position and applying a priming coat of approved steel primer using
structural steel etc. as required.In stringers, treads,landings etc. of stair cases,
including use of chequered plate wherever required, all complete
563.06
-
-
10.26.3 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing,
balcony railing, staircase railing and similar works, including applying priming coat
of approves steel primer.G.I. pipes
404.09
-
-
OD1584/2024-2025
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or
more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80
ltr/10 sqm of approved brand and manufacture excluding priming coat
564.01
-
-
OD2635/2024-2025 Providing & fixing on roof pressed ceramic roof tile of 10 mm nominal thickness
and of approved size 300x400 mm and as per approved pattern on steel frame work
complete (steel frame work to be paid separately)
257.21
-
-
OD2429/2024-2025 Providing & laying on roof ceramic ridge tile of 10 mm thickness and 22.86 mm
long of approved pattern on steel frame work complete (steel frame work to be paid
separately ).
20.75
-
-
OD2519/2024-2025 Supplying and fixing 42 cm plain GI valley gutter sheet including cutting, bending,
hoisting and fixing position and applying priming coat of approved steel primer
including making necessary
connections with rain water pipes etc. complete as directed by engineer at site.
For truss less roof
3.54
-
-
26.25 Providing and fixing 15 mm thick false ceiling tiles at all heights with integral
densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of
Size 595x595 mm of approved texture, design and patterns having NRC (Noise
Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of
85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per
BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity 0.043 W/m
K as per ASTM 518:1991,in true horizontal level on the existing frame work
consisting of T-sections and Lsections suitably fixed according to tile size as per
direction of Engineer-in-charge.
206.28
-
-
50.18.7.1.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 15 mm
dia 10Kgf/cm2 - Internal work - Exposed on wall
6
-
-
17.28.1.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC.
waste fittings complete.
Semi rigid pipe40 mm dia
9
-
-
50.18.7.3.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm
dia 10Kgf/ cm2- Internal work- Exposed on wall
8
-
-
17.69.1 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved
quality and colour.Waste coupling 31 mm dia of 79 mm length and 62 mm breadth
weighing not less than 45 gms
9
-
-
50.18.7.4.1 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall
9
-
-
17.60.1.1 Providing and fixing trap of self cleansing design with screwed down or hinged
grating without vent arm complete, including cost of cutting and making good the
walls and floors:
100 mm inlet and 100 mm outletSand cast iron S & S as per IS : 3989
3
-
-
50.18.7.6.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing . This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm
dia 6 Kgf/cm2 - Internal work- Exposed on wall
7
-
-
50.18.8.2.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work, including cutting chases and making good the wall etc. 20 mm pipe
10 Kgf/ cm2
20
-
-
50.18.8.3.1 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work, including cutting chases and making good the wall etc. 25 mm pipe
12 kgf/cm2
25
-
-
50.18.8.4.1 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work, including cutting chases and making good the wall etc. 32 mm pipe
10Kgf/cm2
22
-
-
50.18.8.6.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work, including cutting chases and making good the wall etc. 50 mm pipe
6 kgf/cm2
10
-
-
50.18.8.8.2 Providing and fixing PVC pipes, fittings, including fixing the pipe with clamps at
1.00 m spacing. this includes jointing of pipes with one step PVC solvent cement and
testing of joints complete as per the direction of Engineer-in-Charge. Concealed
work, including cutting chases and making good the wall etc. 75 mm pipe 4 kgf/cm2
10
-
-
50.18.9.6.1 Providing and fixing PVC pipes includings jointing of pipes with one step PVC
solvent cement, trenching, refilling & testing of joints complete as per direction
of Engineer in Charge. 50 mm dia 10Kgf/cm2
10
-
-
50.18.9.7.2 Providing and fixing PVC pipes includings jointing of pipes with one step PVC
solvent cement, trenching, refilling & testing of joints complete as per direction
of Engineer in Charge.63 mm dia 4 Kgf/cm2
32
-
-
50.18.9.9.1 Providing and fixing PVC pipes includings jointing of pipes with one step PVC
solvent cement, trenching, refilling & testing of Joints complete as per direction
of engineer in charge.110 mm dia 6Kgf/cm2
25
-
-
50.18.9.11.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at
1.00m spacing. This includes jointing of pipes & fittings with one step PVC
solvent cement and testing of joints complete as per direction of Engineer-in-Charge
15 mm dia 10 Kgf/cm2- External work - Exposed on wall
8
-
-
50.18.9.13.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm
dia 10 Kgf/cm2- External work - Exposed on wall
7
-
-
50.18.9.18.1 Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m
spacing. This included jointing of pipes with one step PVC solvent cement and testing
of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 -
External work- Exposed on wall
12
-
-
50.18.9.19.2 Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m
spacing. This includes jointing of pipes with one step PVC solvent cement and testing
of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 -
External work - Exposed on wall
15
-
-
50.18.9.20.1
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 63 mm dia Elbow
6
-
-
50.18.9.20.2
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement -63 dia 45 degree Elbow
6
-
-
50.18.9.20.3
Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 63 mm dia Door Elbow
5
-
-
50.18.9.20.4
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 63 mm dia Bend
4
-
-
50.18.9.20.5
Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes
including jointing with PVC solvent cement - 63x63x63 mm dia Tee
4
-
-
50.18.9.20.6
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement -63x63x63 mm dia Door Tee
4
-
-
50.18.9.20.7
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 63 mm dia vent cowl
3
-
-
50.18.9.21.7
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 75 mm dia Vent cowl
3
-
-
50.18.9.22.7
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 110x110x75 mm dia Door Tee
3
-
-
50.18.9.22.12
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 110x75 mm dia Reducer
3
-
-
OD16097/2024-2025
Providing and fixing Upvc multy equal junction/manhole/inspection chamber of
required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts
complete:
100x100x100x100 mm as per IS- 1729
3
-
-
OD16095/2024-2025
:Providing and installing FRP anaerobic septic tanks of size 1512 Lit volume
(2000x900x840 mm or near size) and 5 mm thick for 50 flush/users including all
coast of labour, transportion and installation charges as ordered by Engineer in
charge.
1
-
-
OD16096/2024-2025
Supplying and installing Concrete ring of 1.20 m diameter with 7.5 cm thickness and
30 cm height including sinking the rings in all classes of soil including all cost of
conveyance, labour charges
tools and plants and all other incidental charges etc complete
4
-
-
19.33
Constructing soak pit 1.20x1.20 m filled with brickbats including S.W. drain pipe 100
mm diameter and 1.20 m long complete as per standard design.
1
-
-
16.68
Providing and laying 60 mm thick factory made cement concrete interlocking paver
block of M - 30 grade made by block making machine with strong vibratory
compaction, of approved size, design & shape, laid in required colour and
pattern over and including 50 mm thick compacted bed of coarse sand, filling the
joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
150
-
-
OD16098/2024-2025
Providing and fixing computerised numerical control cut eves board using 8 mm thick
multi wood including all materials as per direction of engineer in charge etc.
complete
14.4
-
-
OD2781/2024-2025
Providing and fixing computerised numerical control cut letters using 18 mm thick
multi wood for name board of fish market including all materials as per direction of
engineer in charge etc.
complete
5.76
-
-
Formation of walk way - mord
-
-
-
3.3
Construction of Embankment with Material Obtained from Roadway Cutting
<br> Construction of embankment with approved materials deposited at site
from roadway cutting and excavation from drain and foundation of other structures
graded and compacted to meet requirement of Tables 300.1 and 300.2 as per
Technical Specification Clause 301.5
2175
-
-
3.15.2
Compacting Original Ground<br> (ii) Compacting original ground supporting
subgrade<br> Loosening of the ground upto a level of 300 mm below the
subgrade level, watered, graded and compacted in layers to meet requirement of
Tables 300.1 and 300.2 for subgrade construction as per Technical Specification
Clause 303.5.2.
1760
-
-
4.1.A.1
Granular Sub-base with Well Graded Material (Table 400.1) <br> (A) By Mix
in Place Method <br> Construction of granular sub-base by providing well
graded material, spreading in uniform layers with motor grader on prepared surface,
mixing by mix in place method with rotavator at OMC, and compacting with smooth
wheel roller to achieve the desired density, complete as per Technical Specification
Clause 401. <br> (i) For Grading I Material
1532.5
-
-
Formation of walk way dsr-Continued
-
-
-
65.81
Deepening the harbour basin and mouth by using sand pumps mounted on barges or
any other suitable method and dumping the spoil with a flow rate of 500m3 slurry per
hour with a solid output of not less than 75 m3/hour at location already pointed out by
the departmental officers with a lead up to a radial distance of 500m, including hire
charges of sand pump, all tools and plants and accesories , fuel charges,idling and
mobilisation charges, providing and shifting the pipe lines including all labour
charges, incidental charges and service tax etc. complete for a depth upto (-) 3.50m
with a tolerance of +/- 20cm.
3281.25
-
-
50.2.25.1 Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
667
-
-
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means
in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift up to 1.5 m, including
getting out the excavated soil and disposal of surplus excavated soil as directed,
within a lead of 50 m.All kinds of soil
674.36
-
-
4.1.8
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4
coarse sand : 8 graded stone aggregate 40 nominal size)
185.19
-
-
5.33.1
Providing and laying in position machine batched and machine mixed design mix M25 grade cement concrete for reinforced cement concrete work, using cement content
as per approved design mix, including pumping of concrete to site of laying but
excluding the cost of centering, shuttering, finishing and reinforcement, including
admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting
of concrete, improve workability without impairing strength and durability as per
direction of Engineer - in-charge. Note:- Cement content considered in this item is @
330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable
separately.All work upto plinth level
11.07
-
-
5.22.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete upto plinth levelThermo - Mechanically Treated
bars of grade Fe-500D or more
830.25
-
-
5.9.1
Centering and shuttering including strutting, etc. and removal of form
for:Foundations, footings, bases of columns, etc for mass concrete
63.6
-
-
13.16.1
6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
90
-
-
8.2.2.2
Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and
prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias
and similar locations, of required size, approved shade, colour and texture laid over
20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with
white cement, mixed with matching pigment, epoxy touch ups, including rubbing,
curing, moulding and polishing to edges to give high gloss finish etc. complete at all
levels.Area of slab over 0.50 sqm
30
-
-
16.69
Providing and laying at or near ground level factory made kerb stone of M-25 grade
cement concrete in position to the required line, level and curvature jointed with
cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or
without grooves ( thickness of joints except at sharp curve shall not to more than 5
mm), including making drainage opening wherever required complete etc. as per
direction of Engineer-in-charge ( length of finished kerb edging shall be measured for
payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge)
238
-
-
16.68
Providing and laying 60 mm thick factory made cement concrete interlocking paver
block of M - 30 grade made by block making machine with strong vibratory
compaction, of approved size, design & shape, laid in required colour and
pattern over and including 50 mm thick compacted bed of coarse sand, filling the
joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
3625
-
-
60.7.2
DR PACKING Under foundation - Dry stone packing under foundation with good
quality blasted rubble including conveyance of material and labour charges etc.
complete as per direction of departmental officers at site.
257.4
-
-
60.7.1
DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry
with good quality blasted rubble including packing to compactness to lines and levels
cost and conveyance of all materials labour charges etc. complete as per direction of
Departmental officers at site
230.4
-
-
OD16196/2024-2025
Random rubble masonry with hard stone in foundation and plinth up to plinth level
with:Cement mortar 1:6 (1 cement : 6 coarse sand)
162
-
-
4.1.3
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse
sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
49.49
-
-
10.26.3
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing,
balcony railing, staircase railing and similar works, including applying priming coat
of approves steel primer.G.I. pipes
5327.15
-
-
OD16239/2024-2025 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or
more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80
ltr/10 sqm of approved brand and manufacture excluding priming coat
269.9
-
-
Construction of rest rooms and toilet block
-
-
-
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means
in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift up to 1.5 m, including
getting out the excavated soil and disposal of surplus excavated soil as directed,
within a lead of 50 m.All kinds of soil
510.97
-
-
2.26.1
Extra for every additional lift 1.5 m or part there of in excavation / banking excavated
or stacked materials.All kinds of soil
139.97
-
-
2.34.1
Supplying chemical emulsion in sealed containers including delivery as
specified.Chlorpyriphos / Lindane emulsifiable concentrate of 20%
132.85
-
-
OD12312/2024-2025
Diluting and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti-termite
treatment (excluding the cost of chemical emulsion).Treatment of soil under existing
floors using
chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm
diameter holes With Chlorpyriphos/Lindane E.C. 20% with 1% concentration - OD
based on 2.35.3.1
211.65
-
-
4.1.8
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4
coarse sand : 8 graded stone aggregate 40 nominal size)
190.85
-
-
5.33.1
Providing and laying in position machine batched and machine mixed design mix M25 grade cement concrete for reinforced cement concrete work, using cement content
as per approved design mix, including pumping of concrete to site of laying but
excluding the cost of centering, shuttering, finishing and reinforcement, including
admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting
of concrete, improve workability without impairing strength and durability as per
direction of Engineer - in-charge. Note:- Cement content considered in this item is @
330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level
81.59
-
-
5.33.2
Providing and laying in position machine batched and machine mixed design mix M25 grade cement concrete for reinforced cement concrete work, using cement content
as per approved design mix, including pumping of concrete to site of laying but
excluding the cost of centering, shuttering, finishing and reinforcement, including
admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting
of concrete, improve workability without impairing strength and durability as per
direction of Engineer - in-charge. Note:- Cement content considered in this item is @
330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable
separately.All work above plinth level upto floor V level
62.97
-
-
5.9.1
Centering and shuttering including strutting, etc. and removal of form
for:Foundations, footings, bases of columns, etc for mass concrete
164.58
-
-
8.2.2.1
Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and
prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias
and similar locations, of required size, approved shade, colour and texture laid over
20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with
white cement, mixed with matching pigment, epoxy touch ups, including rubbing,
curing, moulding and polishing to edges to give high gloss finish etc. complete at all
levels.
Granite of any colour and shadeArea of slab upto 0.50 sqm
5.52
-
-
5.9.3
Centering and shuttering including strutting, etc. and removal of form for:Suspended
floors, roofs, landings, balconies and access platform
247.18
-
-
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels,
beams, plinth beams, girders bressumers and cantilevers
143.58
-
-
5.9.6
Centering and shuttering including strutting, etc. and removal of form for:Columns,
Pillars, Piers, Abutments, Posts and Struts
213.46
-
-
5.9.7
Centering and shuttering including strutting, etc. and removal of form for:Stairs,
(excluding landings ) except spiral - staircases)
11.54
-
-
5.9.16.1
Centering and shuttering including strutting, etc. and removal of form for:
Edges of slabs and breaks in floors and wallsUnder 20 cm wide
50.08
-
-
5.9.19
Centering and shuttering including strutting, etc. and removal of form for:Weather
shade, Chajjas, corbels etc., including edges
28.14
-
-
2.25
Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift up to 1.5 m
8.52
-
-
5.22.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete upto plinth levelThermo - Mechanically Treated
bars of grade Fe-500D or more
6253.21
-
-
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete above plinth level.Thermo - Mechanically
Treated bars of grade Fe-500D or more
8126.19
-
-
50.6.1.4
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm
or nearest available size confirming to IS 2185 part I of 1979 for foundation and
plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc
complete
3.49
-
-
50.6.1.5
Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm
or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to
floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc
complete
40.34
-
-
50.6.3.2
Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm
or nearest available size confirming to IS 2185 part I of 1979 for super structure up to
floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including
cost of scaffolding complete
1.95
-
-
OD16331/2024-2025
Providing and fixing HPL rest room cubicle of size 1200x1170 over all height 1930
with door size 600x1810 partition frames with necessary fittings complete as per
architectural drawings and direction of Engineer-in charge
30.56
-
-
13.16.1
6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
549.57
-
-
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
455.94
-
-
13.7.2
12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1
cement : 4 fine sand)
75.74
-
-
13.43.1
Applying one coat of water thinnable cement primer of approved brand and
manufacture on wall surface:Water thinnable cement primer
239.13
-
-
13.83.2
Wall painting with premium acrylic emulsion paint of interior grade, having VOC
(Volatile including applying additional coats wherever required to achieve even shade
and colour.Two coats
239.13
-
-
13.46.1
Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two
or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior
primer applied @ 2.20 kg/10 sqm)
86.3
-
-
13.45.1
Finishing walls with textured exterior pint of required shade:New work (Two or more
coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer
applied @ 2.20 kg/ 10 sqm
569.34
-
-
OD12495/2024-2025
Providing and laying antiskid vitrified floor tiles in different sizes (thickness to be
specified by the manufacturer) with water absorption less than 0.08% and conforming
to IS : 15622, of
approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1
cement : 4 coarse sand), including grouting the joints with white cement and
matching pigments etc., complete. Size of Tile 600 x 600 mm
217.13
-
-
11.46.2
Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by
manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622,
of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm
thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the
joint with white cement & matching pigments etc. complete.Size of Tile
600x600 mm
125.18
-
-
11.48.2
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout
mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg
of resin per kg). including filling /grouting and finishing complete as per direction of
Engineer-in-charge.Size of Tile 600x600 mm
346.92
-
-
50.10.1
Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.)
trusses etc., including cutting, hoisting,fixing in position and applying a priming coat
of approved steel primer, including welding and bolted with special shaped washers
etc. complete
5125.75
-
-
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing
in position and applying a priming coat of approved steel primer, including welding
and bolted with special shaped washers etc. complete
1815.27
-
-
10.1
Structural steel work in single section, fixed with or without connecting plate,
including cutting, hoisting, fixing in position and applying a priming coat of approved
steel primer all complete.
220.78
-
-
26.25
Providing and fixing 15 mm thick false ceiling tiles at all heights with integral
densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of
Size 595x595 mm of approved texture, design and patterns having NRC (Noise
Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of
85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per
BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <
0.043 W/m K as per ASTM 518:1991,in true horizontal level on the existing frame
work consisting of T-sections and Lsections suitably fixed according to tile size as per
direction of Engineer-in-charge
265.03
-
-
OD16175/2024-2025 Providing & laying on roof ceramic ridge tile of 20 mm thickness and of
approved pattern on steel frame work complete (steel frame work to be paid
separately ).
72
-
-
OD16176/2024-2025 Providing & fixing on roof pressed ceramic roof tile of 10 mm nominal thickness
and of approved size 300x400 mm and as per approved pattern on steel frame work
complete (steel frame work to be paid separately)
204.42
-
-
16.68
Providing and laying 60 mm thick factory made cement concrete interlocking paver
block of M - 30 grade made by block making machine with strong vibratory
compaction, of approved size, design & shape, laid in required colour and
pattern over and including 50 mm thick compacted bed of coarse sand, filling the
joints with fine sand etc. all complete as per the direction of Engineer-in-charge
1158
-
-
OD16178/2024-2025
Providing and fixing computerised numerical control cut using 8 mm thick multi
wood for eves board including all materials as per direction of engineer in charge etc.
complete
16.47
-
-
22.5
Providing and laying water proofing treatment in sunken portion of WCs, bathroom
etc., by applying cement slurry mixed with water proofing cement compound
consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with
water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air
cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with
water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air
cure for 4 hours followed with water curing for 48 hours. The rate includes
preparation of surface, treatment and sealing of all joints, corners, junctions of pipes
and masonry with polymer mixed slurry.
3
-
-
13.48.3
Finishing with Deluxe Multi surface paint system for interiors and exteriors using
primer as per manufacturers specifications:Painting Steel work with Deluxe Multi
Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm
over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and
manufacture
4.05
-
-
OD16350/2024-2025
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or
more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80
ltr/10 sqm of approved brand and manufacture excluding priming coat
2477.46
-
-
10.6.1
Supplying and fixing rolling shutters of approved make, made of required size M.S.
laths, interlocked together through their entire length and jointed together at the end
by end locks, mounted on specially designed pipe shaft with brackets, side guides and
arrangements for inside and outside locking with push and pull operation complete,
including the cost of providing and fixing necessary 27.5 cm long wire springs
manufactured from high tensile steel wire of adequate strength conforming to IS:
4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25
mm M.S. laths with 1.25 mm thick top cover
6.3
-
-
10.9
Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar
instead of laths as per design approved by Engineer -in-Charges, (area of grill to be
measured).
1.4
-
-
10.7
Providing and fixing ball bearing for rolling shutters.
2
-
-
13.52.1
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied
as per manufacturer's specifications including appropriate priming coat,
preparation of surface, etc. complete.On steel work
6.3
-
-
9.117.1
Providing and fixing factory made uPVC door frame made of uPVC extruded
sections having an overall dimension as below (tolerance ±1 mm), with wall
thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with
galvanized brackets and stainless steel screws, joints mitred and plastic welded. The
hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19
mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges
fixed to the frame complete as per manufacturer's specification and direction of
Engineer-in-chargeExtruded section profile size 48x40 mm
46.2
-
-
9.118.1
Providing and fixing to existing door frames24 mm thick factory made PVC door
shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall
thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and
rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of
size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles
of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1
mm (± 0.1 mm) wall thickness. The lock rail made up of 'H'
section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm)
wall thickness,fixed to the shutter styles by means of plastic/galvanised M.S.
'U' cleats. The shutter frame filled with a uPVC multi-chambered single
panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two
places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and
washers, complete as per manufacturer's specification and direction of
Engineer-in-charge( For W.C. and bathroom door shutter).
15.12
-
-
9.147B.1
543
SUB HEAD : 9 - WOOD & PVC WORK
9.147B
Providing and fixing factory made uPVC white colour fixed glazed windows/
ventilators comprising of uPVC multi-chambered frame and mullion (where ever
required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick
galvanized
mild steel section made from roll forming process of required length (shape &
size according to uPVC profile), , uPVC extruded glazing beads of appropriate
dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished
wall, plastic packers, plastic caps and necessary stainless steel screws etc.
Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if
required) shall be also fusion welded including drilling of holes for fixing
hardware's and drainage of water etc. After fixing frame the gap between frame
and adjacent finished wall shall be filled with weather proof silicon sealant over
backer rod of required size and of approved quality, all complete as per approved
drawing & direction of Engineer-in-Charge. (Single / double glass panes
and
silicon sealant shall be paid separately).<br>
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance
in dimension i.e. in depth & width of profile shall be acceptable.Fixed window /
ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both
having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate
dimension. (Area upto 0.75 sqm.)
38.73
-
-
10.26.3
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing,
balcony railing, staircase railing and similar works, including applying priming coat
of approves steel primer.G.I. pipes
1468.45
-
-
18.19.2.1
Providing and fixing gun metal non-return valve of approved quality (screwed end):
32 mm nominal boreHorizontal
6
-
-
18.19.2.2
Providing and fixing gun metal non-return valve of approved quality (screwed end):
32 mm nominal boreVertical
6
-
-
18.18.3
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:25 mm nominal bore
6
-
-
18.17.1
Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed end) :25 mm nominal bore
8
-
-
18.17.2
Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed end) :32 mm nominal bore
8
-
-
18.51.1
Providing and fixing C.P. brass long body bib cock of approved quality conforming to
IS standards and weighing not less than 690 gms.15 mm nominal bore
11
-
-
18.52.1
Providing and fixing C.P brass stop cock ( concealed) of standard design and of
approved make conforming to IS: 893115 mm nominal bore
16
-
-
18.65
Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102
mm, height of 75 mm with concealed fittings arrangements, weighing not less than
106 gms
11
-
-
9.48.1
Providing and fixing M.S. Grills of required pattern in frames of windows etc. with
M.S. flats, square or round bars etc. including priming coat with approved steel
primer all complete.Fixed to steel windows by welding
176.43
-
-
17.2.1
Providing and fixing white vitreous china pedestal type water closet (European type
W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including
flush pipe, with manually controlled device (handle lever), conforming to IS : 7231,
with all fittings and fixtures complete, including cutting and making good the walls
and floors wherever required:W.C. pan with ISI marked white solid plastic seat and
lid
10
-
-
17.24
Providing and fixing white vitreous china squatting plate urinal with integral rim
longitudinal flush pipe.
2
-
-
17.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32
mm C.P. brass waste of standard pattern, including painting of fittings and brackets,
cutting and making good the walls wherever require:White Vitreous China Wash
basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
9
-
-
18.48
Providing and placing on terrace (at all floor levels) polyethylene water storage tank
:ISI 12701 marked, with cover and suitable locking arrangement and making
necessary holes for inlet, outlet and overflow pipes but without fittings and the base
support for tank.
8000
-
-
17.32.4
Providing and fixing mirror of superior glass ( of approved quality) and of required
shape and size with plastic moulded frame of approved make and shade with 6 mm
thick hard board backing :Rectangular shape 1500x450 mm
9
-
-
19.4.1.1
Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I.
grating brick masonry chamber with water tight C.I. cover with frame of 300x300
mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not
less than 2.70 kg as per standard design:
100x100 mm size P typeWith common burnt clay F.P.S. (non modular) bricks of
class designation 7.5
30
-
-
50.18.7.1.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 15 mm
dia 10Kgf/cm2 - Internal work - Exposed on wall
6
-
-
50.18.7.3.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm
dia 10Kgf/ cm2- Internal work- Exposed on wall
32
-
-
50.18.7.4.1
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm
dia 10Kgf/cm2- Internal work - Exposed on wall
36
-
-
50.18.7.6.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing . This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm
dia 6 Kgf/cm2 - Internal work- Exposed on wall
28
-
-
50.18.8.2.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work, including cutting chases and making good the wall etc. 20 mm pipe
10 Kgf/ cm2
80
-
-
50.18.8.3.1
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work, including cutting chases and making good the wall etc. 25 mm pipe
12 kgf/cm2
100
-
-
50.18.8.4.1
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work, including cutting chases and making good the wall etc. 32 mm pipe
10Kgf/cm2
88
-
-
50.18.8.6.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work, including cutting chases and making good the wall etc. 50 mm pipe
6 kgf/cm2
40
-
-
50.18.8.8.2
Providing and fixing PVC pipes, fittings, including fixing the pipe with clamps at
1.00 m spacing. this includes jointing of pipes with one step PVC solvent cement and
testing of joints complete as per the direction of Engineer-in-Charge. Concealed
work, including cutting chases and making good the wall etc. 75 mm pipe 4 kgf/cm2
60
-
-
50.18.9.6.1
Providing and fixing PVC pipes includings jointing of pipes with one step PVC
solvent cement, trenching, refilling & testing of joints complete as per direction
of Engineer in Charge. 50 mm dia 10Kgf/cm2
40
-
-
50.18.9.7.2
Providing and fixing PVC pipes includings jointing of pipes with one step PVC
solvent cement, trenching, refilling & testing of joints complete as per direction
of Engineer in Charge.63 mm dia 4 Kgf/cm2
128
-
-
50.18.9.9.1
Providing and fixing PVC pipes includings jointing of pipes with one step PVC
solvent cement, trenching, refilling & testing of Joints complete as per direction
of engineer in charge.110 mm dia 6Kgf/cm2
150
-
-
50.18.9.11.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at
1.00m spacing. This includes jointing of pipes & fittings with one step PVC
solvent cement and testing of joints complete as per direction of Engineer-in-Charge
15 mm dia 10 Kgf/cm2- External work - Exposed on wall
32
-
-
50.18.9.13.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm
dia 10 Kgf/cm2- External work - Exposed on wall
28
-
-
50.18.9.18.1
Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m
spacing. This included jointing of pipes with one step PVC solvent cement and testing
of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 -
External work- Exposed on wall
48
-
-
50.18.9.19.2
Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m
spacing. This includes jointing of pipes with one step PVC solvent cement and testing
of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 -
External work - Exposed on wall
60
-
-
50.18.9.20.1
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 63 mm dia Elbow
6
-
-
50.18.9.20.2
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement -63 dia 45 degree Elbow
6
-
-
50.18.9.20.3
Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 63 mm dia Door Elbow
5
-
-
50.18.9.20.4
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 63 mm dia Bend
4
-
-
50.18.9.20.5
Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes
including jointing with PVC solvent cement - 63x63x63 mm dia Tee
4
-
-
50.18.9.20.6
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement -63x63x63 mm dia Door Tee
4
-
-
50.18.9.20.7
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 63 mm dia vent cowl
3
-
-
50.18.9.21.7
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 75 mm dia Vent cowl
3
-
-
50.18.9.22.7
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 110x110x75 mm dia Door Tee
3
-
-
50.18.9.22.12
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 110x75 mm dia Reducer
3
-
-
17.28.1.2
Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC.
waste fittings complete.
Semi rigid pipe40 mm dia
14
-
-
17.60.1.1
Providing and fixing trap of self cleansing design with screwed down or hinged
grating without vent arm complete, including cost of cutting and making good the walls and floors:
100 mm inlet and 100 mm outletSand cast iron S & S as per IS : 3989
6
-
-
17.69.1
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved
quality and colour.Waste coupling 31 mm dia of 79 mm length and 62 mm breadth
weighing not less than 45 gms
12
-
-
19.33
Constructing soak pit 1.20x1.20 m filled with brickbats including S.W. drain pipe 100
mm diameter and 1.20 m long complete as per standard design.
5
-
-
OD16450/2024-2025
Providing and fixing multy equal junction/manhole/inspection chamber of required
degree with access door, insertion rubber washer 3 mm thick, bolts and nuts
complete:
100x100x100x100 mm Upvc as per IS- 1729
5
-
-
OD16448/2024-2025
Supplying and installing Concrete ring of 1.20 m diameter with 7.5 cm thickness and
30 cm height including sinking the rings in all classes of soil including all cost of
conveyance, labour charges
tools and plants and all other incidental charges etc complete.
20
-
-
OD13930/2024-2025
Providing and fixing FRP anaerobic septic tanks for 100 users including all cost of
labour transportation fixing as ordered by engineer in charge
5
-
-
Construction of watch tower (mandapam)
-
-
-
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means
in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift up to 1.5 m, including
getting out the excavated soil and disposal of surplus excavated soil as directed,
within a lead of 50 m.All kinds of soil
55.04
-
-
4.1.8
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4
coarse sand : 8 graded stone aggregate 40 nominal size)
13.82
-
-
5.33.1
Providing and laying in position machine batched and machine mixed design mix M25 grade cement concrete for reinforced cement concrete work, using cement content
as per approved design mix, including pumping of concrete to site of laying but
excluding the cost of centering, shuttering, finishing and reinforcement, including
admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting
of concrete, improve workability without impairing strength and durability as per
direction of Engineer - in-charge. Note:- Cement content considered in this item is @
330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable
separately.All work upto plinth level
16.75
-
-
5.33.2
Providing and laying in position machine batched and machine mixed design mix M25 grade cement concrete for reinforced cement concrete work, using cement content
as per approved design mix, including pumping of concrete to site of laying but
excluding the cost of centering, shuttering, finishing and reinforcement, including
admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting
of concrete, improve workability without impairing strength and durability as per
direction of Engineer - in-charge. Note:- Cement content considered in this item is @
330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable
separately.All work above plinth level upto floor V level
2.83
-
-
5.9.1
Centering and shuttering including strutting, etc. and removal of form
for:Foundations, footings, bases of columns, etc for mass concrete
53.76
-
-
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels,
beams, plinth beams, girders bressumers and cantilevers
44.16
-
-
5.9.6
Centering and shuttering including strutting, etc. and removal of form for:Columns,
Pillars, Piers, Abutments, Posts and Struts
37.68
-
-
5.22.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete upto plinth levelThermo - Mechanically Treated
bars of grade Fe-500D or more
2067.84
-
-
5.22A.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete above plinth level.Thermo - Mechanically
Treated bars of grade Fe-500D or more
621.72
-
-
50.6.1.4
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm
or nearest available size confirming to IS 2185 part I of 1979 for foundation and
plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc
complete
13.25
-
-
50.6.2.1
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm
or nearest available size confirming to IS 2185 part I of 1979 for foundation and
plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
0.72
-
-
50.6.1.5
Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm
or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to
floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc
complete
9.72
-
-
2.25
Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift up to 1.5 m
19.2
-
-
10.1
Structural steel work in single section, fixed with or without connecting plate,
including cutting, hoisting, fixing in position and applying a priming coat of approved
steel primer all complete.
40.19
-
-
50.10.1
Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.)
trusses etc., including cutting, hoisting,fixing in position and applying a priming coat
of approved steel primer, including welding and bolted with special shaped washers
etc. complete
2094.32
-
-
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing
in position and applying a priming coat of approved steel primer, including welding
and bolted with special shaped washers etc. complete
1618.85
-
-
OD16104/2024-2025
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or
more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80
ltr/10 sqm of approved brand and manufacture excluding priming coat
179.58
-
-
OD16103/2024-2025
Providing and fixing computerised numerical control cut using 8 mm thick multi
wood for eves board including all materials as per direction of engineer in charge etc.
complete
14.64
-
-
8.2.2.2
Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and
prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias
and similar locations, of required size, approved shade, colour and texture laid over
20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with
white cement, mixed with matching pigment, epoxy touch ups, including rubbing,
curing, moulding and polishing to edges to give high gloss finish etc. complete at all
levels.Area of slab over 0.50 sqm
243.6
-
-
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
43.2
-
-
13.16.1 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
59.76
-
-
16.68
Providing and laying 60 mm thick factory made cement concrete interlocking paver
block of M - 30 grade made by block making machine with strong vibratory
compaction, of approved size, design & shape, laid in required colour and
pattern over and including 50 mm thick compacted bed of coarse sand, filling the
joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
364.8
-
-
OD16101/2024-2025
Providing & laying on roof ceramic ridge tile of 20 mm thickness and of
approved pattern on steel frame work complete (steel frame work to be paid
separately ).
60
-
-
OD16102/2024-2025
Providing & fixing on roof pressed ceramic roof tile of 10 mm nominal thickness
and of approved size 300x400 mm and as per approved pattern on steel frame work
complete (steel frame work to be paid separately)
148.84
-
-
13.46.1
Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two
or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior
primer applied @ 2.20 kg/10 sqm)
87.36
-
-
Entrance and Gate
-
-
-
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means
in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift up to 1.5 m, including
getting out the excavated soil and disposal of surplus excavated soil as directed,
within a lead of 50 m.All kinds of soil
81.82
-
-
4.1.8
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4
coarse sand : 8 graded stone aggregate 40 nominal size)
16.73
-
-
4.1.4
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2
coarse sand : 4 graded stone aggregate 40 mm nominal size)
0.14
-
-
4.2.3
Providing and laying cement concrete in retaining walls, return walls, walls ( any
thickness) including attached pilasters, columns, piers, abutments, pillars, posts,
struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks,
plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost
of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size)
0.05
-
-
60.7.2
DR PACKING Under foundation - Dry stone packing under foundation with good
quality blasted rubble including conveyance of material and labour charges etc.
complete as per direction of departmental officers at site.
53.46
-
-
OD16116/2024-2025
Random rubble masonry with hard stone in foundation and plinth up to plinth level
with:Cement mortar 1:6 (1 cement : 6 coarse sand)
45.12
-
-
5.33.1 Providing and laying in position machine batched and machine mixed design mix M25 grade cement concrete for reinforced cement concrete work, using cement content
as per approved design mix, including pumping of concrete to site of laying but
excluding the cost of centering, shuttering, finishing and reinforcement, including
admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting
of concrete, improve workability without impairing strength and durability as per
direction of Engineer - in-charge. Note:- Cement content considered in this item is @
330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable
separately.All work upto plinth level
10.5
-
-
5.33.2
Providing and laying in position machine batched and machine mixed design mix M25 grade cement concrete for reinforced cement concrete work, using cement content
as per approved design mix, including pumping of concrete to site of laying but
excluding the cost of centering, shuttering, finishing and reinforcement, including
admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting
of concrete, improve workability without impairing strength and durability as per
direction of Engineer - in-charge. Note:- Cement content considered in this item is @
330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable
separately.All work above plinth level upto floor V level
0.45
-
-
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels,
beams, plinth beams, girders bressumers and cantilevers
52.64
-
-
5.22.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete upto plinth levelThermo - Mechanically Treated
bars of grade Fe-500D or more
945.27
-
-
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete above plinth level.Thermo - Mechanically
Treated bars of grade Fe-500D or more
40.5
-
-
50.6.1.4
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm
or nearest available size confirming to IS 2185 part I of 1979 for foundation and
plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc
complete
0.14
-
-
50.6.2.1
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm
or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
0.27
-
-
50.6.2.3
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15cm
or nearest available size confirming to IS 2185 part I of 1979 for super structure
above floor two level upto floor five level with thickness 15cm in : CM 1:6 ( 1
cement : 6 coarse sand) etc complete
62.69
-
-
2.25
Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
12.74
-
-
50.10.1
Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.)
trusses etc., including cutting, hoisting,fixing in position and applying a priming coat
of approved steel primer, including welding and bolted with special shaped washers
etc. complete
1163.29
-
-
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing
in position and applying a priming coat of approved steel primer, including welding
and bolted with special shaped washers etc. complete
941.86
-
-
10.1
Structural steel work in single section, fixed with or without connecting plate,
including cutting, hoisting, fixing in position and applying a priming coat of approved
steel primer all complete.
75.36
-
-
10.25.2
Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting,
fixing in position and applying a priming coat of approved steel primer using
structural steel etc. as required.In gratings, frames, guard bar, ladder, railings,
brackets, gates and similar works
290.5
-
-
26.25
Providing and fixing 15 mm thick false ceiling tiles at all heights with integral
densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of
Size 595x595 mm of approved texture, design and patterns having NRC (Noise
Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per
BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <
0.043 W/m K as per ASTM 518:1991,in true horizontal level on the existing frame
work consisting of T-sections and Lsections suitably fixed according to tile size as per
direction of Engineer-in-charge.
79.2
-
-
10.26.3
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing,
balcony railing, staircase railing and similar works, including applying priming coat
of approves steel primer.G.I. pipes
67.14
-
-
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
830.88
-
-
13.43.1
Applying one coat of water thinnable cement primer of approved brand and
manufacture on wall surface:Water thinnable cement primer
50.16
-
-
13.83.2
Wall painting with premium acrylic emulsion paint of interior grade, having VOC
(Volatile including applying additional coats wherever required to achieve even shade
and colour.Two coats
50.16
-
-
13.46.1
Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two
or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior
primer applied @ 2.20 kg/10 sqm)
820.56
-
-
9.117.1
Providing and fixing factory made uPVC door frame made of uPVC extruded
sections having an overall dimension as below (tolerance ±1 mm), with wall
thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with
galvanized brackets and stainless steel screws, joints mitred and plastic welded. The
hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19
mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges
fixed to the frame complete as per manufacturer's specification and direction of
Engineer-in-chargeExtruded section profile size 48x40 mm
12
-
-
9.118.2
Providing and fixing to existing door frames30 mm thick factory made Polyvinyl
Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of
size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative
moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness
1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting
galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall
thickness. The lock rail made up of 'H' section, a uPVC hollow section of
size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter
styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame
filled with a uPVC multi-chambered single panel of size not less than 620 mm,
having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness.
The panels filled vertically and tie bar at two places by inserting horizontally 6 mm
galvanised M.S. rod and fastened with nuts and washers, complete as per
manufacturer's specification and direction of Engineer-in-charge.
3.78
-
-
9.147B.1
543
SUB HEAD : 9 - WOOD & PVC WORK
9.147B
Providing and fixing factory made uPVC white colour fixed glazed windows/
ventilators comprising of uPVC multi-chambered frame and mullion (where ever
required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick
galvanized
mild steel section made from roll forming process of required length (shape &
size according to uPVC profile), , uPVC extruded glazing beads of appropriate
dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished
wall, plastic packers, plastic caps and necessary stainless steel screws etc.
Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if
required) shall be also fusion welded including drilling of holes for fixing
hardware's and drainage of water etc. After fixing frame the gap between frame
and adjacent finished wall shall be filled with weather proof silicon sealant over
backer rod of required size and of approved quality, all complete as per approved
drawing & direction of Engineer-in-Charge. (Single / double glass panes
and
silicon sealant shall be paid separately).<br>
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance
in dimension i.e. in depth & width of profile shall be acceptable.Fixed window /
ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both
having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate
dimension. (Area upto 0.75 sqm.)
0.66
-
-
9.147D.1
Providing and fixing factory made uPVC white colour sliding glazed window upto
1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built
roller track and sash extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick
galvanized mild steel section made from roll forming process of required length
(shape & size according to uPVC profile), appropriate dimension of uPVC
extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc
alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon
rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing
frame to finished wall and necessary stainless steel screws etc. Profile of frame
& sash shall be mitred cut and fusion welded at all corners, including drilling of
holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon
sealent over backer rod of required size and of approved quality, all complete as per
approved drawing & direction of Engineer-in-Charge. (Single / double glass
panes, wire mesh and silicon sealent shall be paid separately)
Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension
i.e. in depth & width of profile shall be acceptable.Two track two panels sliding
window made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both
having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate
dimension. (Area of window upto 1.75 sqm)
5.4
-
-
21.3.1
Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the
architectural drawings and the directions of Engineer - in -Charge. ( Cost of
aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm
thickness
5.4
-
-
9.48.1
Providing and fixing M.S. Grills of required pattern in frames of windows etc. with
M.S. flats, square or round bars etc. including priming coat with approved steel
primer all complete.Fixed to steel windows by welding
90.9
-
-
OD16114/2024-2025
Providing & laying on roof ceramic ridge tile of 20 mm thickness and of
approved pattern on steel frame work complete (steel frame work to be paid
separately ).
3.6
-
-
OD16115/2024-2025
Providing & fixing on roof pressed ceramic roof tile of 10 mm nominal thickness
and of approved size 300x400 mm and as per approved pattern on steel frame work
complete (steel frame work to be paid separately)
90.72
-
-
OD16117/2024-2025
Providing and laying antiskid vitrified floor tiles in different sizes (thickness to be
specified by the manufacturer) with water absorption less than 0.08% and conforming
to IS : 15622, of
approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1
cement : 4 coarse sand), including grouting the joints with white cement and
matching pigments etc., complete. Size of Tile 600 x 600 mm
12.72
-
-
11.46.2
Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by
manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622,
of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm
thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile
600x600 mm
2.82
-
-
OD16120/2024-2025
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or
more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80
ltr/10 sqm of approved brand and manufacture excluding priming coat
120.49
-
-
16.91.2
Providing and laying factory made chamfered edge Cement Concrete paver blocks
in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,
thickness & size/ shape, made by table vibratory method using PU mould, laid in
required colour & pattern over 50mm thick compacted bed of sand, compacting
and
proper embedding/laying of inter locking paver blocks into the sand bedding layer
through vibratory compaction by using plate vibrator, filling the joints with sand and
cutting of paver blocks as per required size and pattern, finishing and sweeping
extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C.
paver block of M-30 grade with approved color design and pattern.
92.28
-
-
OD16338/2024-2025
Providing and fixing computerised numerical control cut letters using 18 mm thick
multi wood for name board of Integrated aqua project, Kuthiravattom chira including
all materials as per direction of engineer in charge etc.
complete
1.8
-
-
OD16456/2024-2025
Providing and fixing computerised numerical control cut using 8 mm thick multi
wood for eves board including all materials as per direction of engineer in charge etc.
complete
4.38
-
-
Chain link fencing
-
-
-
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means
in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift up to 1.5 m, including
getting out the excavated soil and disposal of surplus excavated soil as directed,
within a lead of 50 m.All kinds of soil
222.81
-
-
60.7.2
DR PACKING Under foundation - Dry stone packing under foundation with good
quality blasted rubble including conveyance of material and labour charges etc.
complete as per direction of departmental officers at site
182.81
-
-
60.7.1
DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry
with good quality blasted rubble including packing to compactness to lines and levels
cost and conveyance of all materials labour charges etc. complete as per direction of
Departmental officers at site
312.88
-
-
OD16122/2024-2025
Random rubble masonry with hard stone in foundation and plinth up to plinth level
with:Cement mortar 1:6 (1 cement : 6 coarse sand)
71.89
-
-
4.1.8
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4
coarse sand : 8 graded stone aggregate 40 nominal size)
37.13
-
-
4.1.3
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse
sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
65.03
-
-
5.9.1
Centering and shuttering including strutting, etc. and removal of form
for:Foundations, footings, bases of columns, etc for mass concrete
254.63
-
-
50.6.1.4
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm
or nearest available size confirming to IS 2185 part I of 1979 for foundation and
plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc
complete
7.6
-
-
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
114
-
-
50.10.1
Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.)
trusses etc., including cutting, hoisting,fixing in position and applying a priming coat
of approved steel primer, including welding and bolted with special shaped washers
etc. complete
5013.94
-
-
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding
and bolted with special shaped washers etc. complete
2581.15
-
-
10.1
Structural steel work in single section, fixed with or without connecting plate,
including cutting, hoisting, fixing in position and applying a priming coat of approved
steel primer all complete.
354.64
-
-
13.52.1
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied
as per manufacturer's specifications including appropriate priming coat,
preparation of surface, etc. complete.On steel work
247.57
-
-
16.70.2
Providing and fixing G.I. chain link fabric fencing of required width in mesh size
50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as
required complete as per the direction of Engineer-in- charge.Made of G.I wire of dia
4 mm. PVC coated to achieve outer dia. not less than 5 mm in required colour and
shade
1430
-
-
Cast iron benches and stone benches
-
-
-
OD16237/2024-2025
Supplying and fixing outdoor garden cast iron bench of size 1600x690x880 mm or
nearest available size having a weight of 60kg or above and as per the design
approved by the engineer in charge.
20
-
-
OD16438/2024-2025
STONE BENCH - Providing and fixing stone bench of 1500cm with back rest
support with 75mm thick solid krishnashila granite stone fixed on to vertical granite
supports 125mm thick, both having one line chiseled finish, and fixed with anchorage
of 150mm embedded into PCC as per architectural drawings. Including cost of all
material, labour charge ,transportation, electricity and fuel for the generator etc all
complete as per direction of Engineer - in-charge.
20
-
-
16.68
Providing and laying 60 mm thick factory made cement concrete interlocking paver
block of M - 30 grade made by block making machine with strong vibratory
compaction, of approved size, design & shape, laid in required colour and
pattern over and including 50 mm thick compacted bed of coarse sand, filling the
joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
330
-
-
Construction of tube well with purification system
-
-
-
23.1.1.1
Boring / drilling bore well of required dia for casing / strainer pipe, by suitable
method prescribed in IS: 2800 ( part I), including collecting samples from different
strata, preparing and submitting strata chart/ bore log, including hire & running
charges of all equipments, tools plants & machineries required for the job, all
complete as per direction of Engineer - in- Charge, upto 90 metre depth below ground
level.
All types of soil300 mm dia
60
-
-
OD16340/2024-2025
Providing suplying and installation of Borewell Submersible Pump-1.5HP of head
80m, discharge range is 10-95lpm, suction and delivery size 32mm, water cooling
with 6mm dia ss rop including
all accessories, fittings etc complete of approved IS make as per design and drawings
and deviation of Engineer at site
1
-
-
OD16341/2024-2025
Providing, supply and fixing Y STAINER- 50mm dia including all fittings and
accessories of approved IS make etc complete as per design and drawings.
1
-
-
23.3.3
Supplying, assembling, lowering and fixing in vertical position in bore well,
unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS :
12818, including required hire and labour charges, fittings & accessories etc. all
complete, for all depths, as per direction of Engineer- in- Charge.200 mm nominal
size dia
60
-
-
Establishment of high tech fish harchery
-
-
-
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means
in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift up to 1.5 m, including
getting out the excavated soil and disposal of surplus excavated soil as directed,
within a lead of 50 m.All kinds of soil
321.6
-
-
60.7.2
DR PACKING Under foundation - Dry stone packing under foundation with good
quality blasted rubble including conveyance of material and labour charges etc.
complete as per direction of departmental officers at site.
3.36
-
-
4.1.8
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4
coarse sand : 8 graded stone aggregate 40 nominal size)
73.11
-
-
2.25
Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift up to 1.5 m
285
-
-
4.1.5
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3
coarse sand : 6 graded stone aggregate 20 mm nominal size)
10.35
-
-
4.3.1
Centering and shuttering including strutting, propping etc. and removal of form work
for:Foundations, footings, bases for columns
79.24
-
-
5.1.2
Providing and laying in position specified grade of reinforced cement concrete,
excluding the cost of centering, shuttering, finishing and reinforcement - All work up
to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm
nominal size
102.4
-
-
5.9.1
Centering and shuttering including strutting, etc. and removal of form
for:Foundations, footings, bases of columns, etc for mass concrete
314.89
-
-
5.9.2
Centering and shuttering including strutting, etc. and removal of form for:Walls (any
thickness) including attached pilasters, butteresses, plinth and string courses etc
62
-
-
5.2.2
Reinforced cement concrete work in walls (any thickness), including attached
pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,
abutments, posts and struts etc. up tot floor five level excluding cost of centering,
shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded
stone aggregate 20 mm nominal size)
33.13
-
-
5.9.6 Centering and shuttering including strutting, etc. and removal of form for:Columns,
Pillars, Piers, Abutments, Posts and Struts
246.76
-
-
5.9.7
Centering and shuttering including strutting, etc. and removal of form for:Stairs,
(excluding landings ) except spiral - staircases)
17.28
-
-
5.9.20
Centering and shuttering including strutting, etc. and removal of form for:Suspended
floors, roofs, landings, balconies and access platform with water proof ply 12 mm
thick
137.58
-
-
5.3
Reinforced cement concrete work in beams, suspended floors, roofs, having slope up
to 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands,
plain window sills, staircases and spiral stair cases up to floor five level excluding the
cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5
coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
83.11
-
-
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels,
beams, plinth beams, girders bressumers and cantilevers
421.68
-
-
5.9.3
Centering and shuttering including strutting, etc. and removal of form for:Suspended
floors, roofs, landings, balconies and access platform
88.62
-
-
5.9.19
Centering and shuttering including strutting, etc. and removal of form for:Weather
shade, Chajjas, corbels etc., including edges
26.86
-
-
5.22.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete upto plinth levelThermo - Mechanically Treated
bars of grade Fe-500D or more
16515.12
-
-
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete above plinth level.Thermo - Mechanically
Treated bars of grade Fe-500D or more
13690.98
-
-
50.2.25.1
Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of
foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction
of site Engineer-in-charge
260.64
-
-
50.6.1.5
Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm
or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to
floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc
complete
89.04
-
-
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
576.7
-
-
13.16.1
6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
135.72
-
-
13.11
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 ( 1
cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 ( 1
cement : 6 fine sand).
837.05
-
-
13.7.1
12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1
cement : 3 fine sand)
210.66
-
-
22.23A
Providing & Applying polymer modified, flexible cementatious negative side
waterproofing coating with elastic waterproofing polymers on interior wall plaster
surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious
waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of
cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after
scrapping and properly cleaning the surface to remove pre-existing paint film &
loose particles till plaster is visible, complete in all respect as per the direction of
Engineer-in-Charge.
177.04
-
-
OD17876/2024-2025
Providing and laying antiskid vitrified floor tiles in different sizes (thickness to be
specified by the manufacturer) with water absorption less than 0.08% and conforming
to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1
cement : 4 coarse sand), including grouting the joints with white cement and
matching pigments etc., complete. Size of Tile 600 x 600 mm
289.54
-
-
11.46.2
Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by
manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622,
of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm
thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the
joint with white cement & matching pigments etc. complete.Size of Tile
600x600 mm
17.67
-
-
OD21265/2024-2025
Grouting the joints of flooring tiles having joints of 5 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm
307.21
-
-
8.2.2.2
Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and
prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias
and similar locations, of required size, approved shade, colour and texture laid over
20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with
white cement, mixed with matching pigment, epoxy touch ups, including rubbing,
curing, moulding and polishing to edges to give high gloss finish etc. complete at all
levels.Area of slab over 0.50 sqm
2.4
-
-
50.9.1.1
Providing wood work in frames of doors, windows, clerestory windows and other
frames, wrought framed and fixed in position with hold fast lugs or with dash
fasteners of required dia & length (hold fast lugs or dash fastener shall be paid
for separately), using good quality Anjili wood /jack wood
1.2
-
-
50.9.2.1
Providing and fixing paneled and glazed shutters for doors, windows and clerestory
windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright
finished of required size with necessary screws, excluding panelling which will be
paid for separately, all complete as per direction of Engineerin - charge using Anjili/
Jack wood
40.74
-
-
50.9.4.1
Providing and fixing paneling or paneling and glazing in paneled or paneled and
glazed shutters for doors, windows and clerestory windows (Area of opening for
panel inserts excluding portion inside grooves or rebates to be measured) paneling for
paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality
Anjili/ Jack wood
10.58
-
-
50.9.5.1
Providing and fixing glazed shutters for doors, windows and clerestory windows
using 4 mm thick float glass panes including ISI marked M.S pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood/ jack wood
35 mm thick shutters.
23.1
-
-
9.53
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10
mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block
30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size)
82
-
-
9.100.1
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not
less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or
shade, with necessary screws etc. complete:125 mm
14
-
-
9.74.3
Providing and fixing bright finished brass tower bolts (barrel type) with necessary
screws etc. complete:150x10 mm
14
-
-
9.103
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI
marked, with six levers and a pair of anodised (anodic coating not less than grade AC
10 as per IS: 1868) aluminium lever handles of approved quality with necessary
screws etc . complete.
7
-
-
9.48.1
Providing and fixing M.S. Grills of required pattern in frames of windows etc. with
M.S. flats, square or round bars etc. including priming coat with approved steel
primer all complete.Fixed to steel windows by welding
459
-
-
13.43.1
Applying one coat of water thinnable cement primer of approved brand and
manufacture on wall surface:Water thinnable cement primer
654.72
-
-
13.48.3
Finishing with Deluxe Multi surface paint system for interiors and exteriors using
primer as per manufacturers specifications:Painting Steel work with Deluxe Multi
Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm
over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and
manufacture
190.27
-
-
13.46.1
Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior
primer applied @ 2.20 kg/10 sqm)
806.74
-
-
13.60.1
Wall painting with acrylic emulsion paint of approved brand and manufacture to give
an even shade:Two or more coats on new work
459.4
-
-
12.41.2
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes
conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :
5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm
diameter
28.4
-
-
13.62.1
Painting with synthetic enamel paint of approved brand and manufacture of required
colour to give an even shade:Two or more coats on new work over an under coat of
suitable shade with ordinary paint of approved brand and manufacture
79.25
-
-
50.10.1
Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.)
trusses etc., including cutting, hoisting,fixing in position and applying a priming coat
of approved steel primer, including welding and bolted with special shaped washers
etc. complete
6744.6
-
-
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing
in position and applying a priming coat of approved steel primer, including welding
and bolted with special shaped washers etc. complete
1889.48
-
-
OD17848/2024-2025
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or
more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80
ltr/10 sqm of approved brand and manufacture excluding priming coat
277.93
-
-
12.7.1
Providing and fixing 15cm wide, 45 cm overall semi circular plain G.S. sheet gutter
with iron brackets 40x3 mm size, bolts, nuts and washers etc., including making
necessary connections with rain water pipes complete.0.80 mm thick with zinc
coating not less than 275 gm/m2
85
-
-
OD17912/2024-2025
Providing & laying on roof ceramic ridge tile of 20 mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid
separately ).
26.35
-
-
OD17913/2024-2025
Providing & fixing on roof pressed ceramic roof tile of 10 mm nominal thickness
and of approved size 300x400 mm and as per approved pattern on steel frame work
complete (steel frame work to be paid separately)
335.33
-
-
13.52.1
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied
as per manufacturer's specifications including appropriate priming coat,
preparation of surface, etc. complete.On steel work
312.58
-
-
26.25
Providing and fixing 15 mm thick false ceiling tiles at all heights with integral
densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of
Size 595x595 mm of approved texture, design and patterns having NRC (Noise
Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of
85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per
BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <
0.043 W/m K as per ASTM 518:1991,in true horizontal level on the existing frame
work consisting of T-sections and Lsections suitably fixed according to tile size as per
direction of Engineer-in-charge.
285.38
-
-
21.5
Providing and fixing powder coated aluminium work ( minimum thickness of powder
coating 50 micron) consisting of tee /angle sections, of approved make conforming to
IS : 733 in frames of false ceiling including aluminium angle cleats with necessary
C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with
stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I
level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all
complete as per approved architectural drawings and direction of the Engineer-inCharge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be
paid for separately ).
356.73
-
-
21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions
with extruded built up standard tubular sections/ appropriate Z sections and other
sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash
fasteners of required dia and size, including necessary filling up the gaps at junctions,
i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed
mechanically wherever required including cleat angle, Aluminnium snap beading for
glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural
drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash
fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating
50 micron)
4
-
-
21.1.2.2
For shutters of doors, windows & ventilators including providing and fixing
hinges / pivots and making provision for fixing of fittings wherever required
including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid
for separately)Powder coated aluminium (minimum thickness of powder coating 50
micron)
4
-
-
21.3.1
Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the
architectural drawings and the directions of Engineer - in -Charge. ( Cost of
aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm
thickness
2
-
-
50.18.9.3.1
Providing and fixing PVC pipes includings jointing of pipes with one step PVC
solvent cement, trenching, refilling & testing of joints complete as per direction
of Engineer in Charge 25 mm dia 12Kfg/cm2
30
-
-
50.18.9.14.1
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm
dia 10 Kgf/cm2 - External work- Exposed on wall
100
-
-
50.18.9.7.1
Providing and fixing PVC pipes includings of pipes with one step PVC solvent
cement, trenching refilling & testing of joints complete as per direction of
Engineer in Charge. 63 mm dia 6Kgf/cm2
130
-
-
50.18.9.13.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm
dia 10 Kgf/cm2- External work - Exposed on wall
40
-
-
50.18.7.4.1
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall
30
-
-
50.18.9.9.1
Providing and fixing PVC pipes includings jointing of pipes with one step PVC
solvent cement, trenching, refilling & testing of Joints complete as per direction
of engineer in charge.110 mm dia 6Kgf/cm2
100
-
-
50.18.9.15.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm
dia 6 Kgf/cm2 - External work - Exposed on wall
50
-
-
18.18.3
Providing and fixing ball valve (brass) of approved quality, High or low pressure,
with plastic floats complete:25 mm nominal bore
33
-
-
18.51.1
Providing and fixing C.P. brass long body bib cock of approved quality conforming to
IS standards and weighing not less than 690 gms.15 mm nominal bore
1
-
-
50.18.9.22.8
Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes,
including jointing with PVC solvent cement -110 mm dia Vent cowl
1
-
-
17.10.2.1
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983
with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and
brackets, cutting and making good the walls wherever required:
Kitchen sink without drain board610x510 mm bowl depth 200 mm
1
-
-
19.32.1
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey
comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as
per standard design.With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
1
-
-
10.25.2
Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting,
fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings,
brackets, gates and similar works
1020.3
-
-
18.48
Providing and placing on terrace (at all floor levels) polyethylene water storage tank
:ISI 12701 marked, with cover and suitable locking arrangement and making
necessary holes for inlet, outlet and overflow pipes but without fittings and the base
support for tank.
2000
-
-
OD17702/2024-2025
Supplying of 150mm dia HDPE pipe
250
-
-
Establishment of mini aquarium
-
-
-
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means
in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift up to 1.5 m, including
getting out the excavated soil and disposal of surplus excavated soil as directed,
within a lead of 50 m.All kinds of soil
112.52
-
-
2.25
Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
62.08
-
-
2.34.1
Supplying chemical emulsion in sealed containers including delivery as
specified.Chlorpyriphos / Lindane emulsifiable concentrate of 20%
115.28
-
-
OD17715/2024-2025
Diluting and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti-termite
treatment (excluding the cost of chemical emulsion).Treatment of soil under existing
floors using
chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm
diameter holes With Chlorpyriphos/Lindane E.C. 20% with 1% concentration - OD
based on 2.35.3.1
205.86
-
-
4.1.8
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
8.93
-
-
5.33.1
Providing and laying in position machine batched and machine mixed design mix M25 grade cement concrete for reinforced cement concrete work, using cement content
as per approved design mix, including pumping of concrete to site of laying but
excluding the cost of centering, shuttering, finishing and reinforcement, including
admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting
of concrete, improve workability without impairing strength and durability as per
direction of Engineer - in-charge. Note:- Cement content considered in this item is @
330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable
separately.All work upto plinth level
35.79
-
-
5.33.2
Providing and laying in position machine batched and machine mixed design mix M25 grade cement concrete for reinforced cement concrete work, using cement content
as per approved design mix, including pumping of concrete to site of laying but
excluding the cost of centering, shuttering, finishing and reinforcement, including
admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting
of concrete, improve workability without impairing strength and durability as per
direction of Engineer - in-charge. Note:- Cement content considered in this item is @
330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable
separately.All work above plinth level upto floor V level
Net Total 28.993cum @115
28.99
-
-
5.9.1
Centering and shuttering including strutting, etc. and removal of form
for:Foundations, footings, bases of columns, etc for mass concrete
106.83
-
-
5.9.19
Centering and shuttering including strutting, etc. and removal of form for:Weather
shade, Chajjas, corbels etc., including edges
78.55
-
-
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels,
beams, plinth beams, girders bressumers and cantilevers
160.79
-
-
5.9.6
Centering and shuttering including strutting, etc. and removal of form for:Columns,
Pillars, Piers, Abutments, Posts and Struts
117.5
-
-
5.22.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
3878.72
-
-
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete above plinth level.Thermo - Mechanically
Treated bars of grade Fe-500D or more
3998.48
-
-
50.6.1.4
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm
or nearest available size confirming to IS 2185 part I of 1979 for foundation and
plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc
complete
11.05
-
-
50.6.1.5
Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm
or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to
floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc
complete
45.94
-
-
50.6.2.1
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm
or nearest available size confirming to IS 2185 part I of 1979 for foundation and
plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
0.34
-
-
9.117.1
Providing and fixing factory made uPVC door frame made of uPVC extruded
sections having an overall dimension as below (tolerance ±1 mm), with wall
thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with
galvanized brackets and stainless steel screws, joints mitred and plastic welded. The
hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19
mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges
fixed to the frame complete as per manufacturer's specification and direction of
Engineer-in-chargeExtruded section profile size 48x40 mm
20.2
-
-
9.118.1
Providing and fixing to existing door frames24 mm thick factory made PVC door
shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall
thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and
rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of
size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles
of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1
mm (± 0.1 mm) wall thickness. The lock rail made up of 'H'
section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm)
wall thickness,fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single
panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm
(± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two
places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and
washers, complete as per manufacturer's specification and direction of
Engineer-in-charge( For W.C. and bathroom door shutter).
8.19
-
-
9.147D.1
Providing and fixing factory made uPVC white colour sliding glazed window upto
1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built
roller track and sash extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick
galvanized mild steel section made from roll forming process of required length
(shape & size according to uPVC profile), appropriate dimension of uPVC
extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc
alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon
rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing
frame to finished wall and necessary stainless steel screws etc. Profile of frame
& sash shall be mitred cut and fusion welded at all corners, including drilling of
holes for fixing hardware's and drainage of water etc. After fixing frame the gap
between frame and adjacent finished wall shall be filled with weather proof silicon
sealent over backer rod of required size and of approved quality, all complete as per
approved drawing & direction of Engineer-in-Charge. (Single / double glass
panes, wire mesh and silicon sealent shall be paid separately)
Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension
i.e. in depth & width of profile shall be acceptable.Two track two panels sliding
window made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both
having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate
dimension. (Area of window upto 1.75 sqm)
2.7
-
-
9.147D.4
Providing and fixing factory made uPVC white colour sliding glazed window upto
1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built
roller track and sash extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick
galvanized mild steel section made from roll forming process of required length
(shape & size according to uPVC profile), appropriate dimension of uPVC
extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc
alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon
rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing
frame to finished wall and necessary stainless steel screws etc. Profile of frame
& sash shall be mitred cut and fusion welded at all corners, including drilling of
holes for fixing hardware's and drainage of water etc. After fixing frame the gap
between frame and adjacent finished wall shall be filled with weather proof silicon
sealent over backer rod of required size and of approved quality, all complete as per
approved drawing & direction of Engineer-in-Charge. (Single / double glass
panes, wire mesh and silicon sealent shall be paid separately)
Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension
i.e. in depth & width of profile shall be acceptable.Three track three panels
sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire
mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both
having wall thickness of 2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm).
4.05
-
-
21.3.1
Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the
architectural drawings and the directions of Engineer - in -Charge. ( Cost of
aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm
thickness
6.75
-
-
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
469.93
-
-
13.7.2
12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1
cement : 4 fine sand)
78.55
-
-
13.16.1
6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
214.07
-
-
13.43.1
Applying one coat of water thinnable cement primer of approved brand and
manufacture on wall surface:Water thinnable cement primer
431.62
-
-
13.83.2
Wall painting with premium acrylic emulsion paint of interior grade, having VOC
(Volatile including applying additional coats wherever required to achieve even shade
and colour.Two coats
431.62
-
-
13.46.1
Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two
or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior
primer applied @ 2.20 kg/10 sqm)
218.36
-
-
50.10.1
Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.)
trusses etc., including cutting, hoisting,fixing in position and applying a priming coat
of approved steel primer, including welding and bolted with special shaped washers
etc. complete
2421.12
-
-
50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding
and bolted with special shaped washers etc. complete
3217.72
-
-
10.1
Structural steel work in single section, fixed with or without connecting plate,
including cutting, hoisting, fixing in position and applying a priming coat of approved
steel primer all complete.
301.44
-
-
9.48.1
Providing and fixing M.S. Grills of required pattern in frames of windows etc. with
M.S. flats, square or round bars etc. including priming coat with approved steel
primer all complete.Fixed to steel windows by welding
295.65
-
-
OD18165/2024-2025
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or
more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80
ltr/10 sqm of approved brand and manufacture excluding priming coat
325.61
-
-
OD18073/2024-2025
Providing and fixing HPL rest room cubicle of size 1200x1170 over all height 1930
with door size 600x1810 partition frames with necessary fittings complete as per
architectural drawings and direction of Engineer-in charge
262.37
-
-
10.6.1
Supplying and fixing rolling shutters of approved make, made of required size M.S.
laths, interlocked together through their entire length and jointed together at the end
by end locks, mounted on specially designed pipe shaft with brackets, side guides and
arrangements for inside and outside locking with push and pull operation complete,
including the cost of providing and fixing necessary 27.5 cm long wire springs
manufactured from high tensile steel wire of adequate strength conforming to IS:
4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25
mm M.S. laths with 1.25 mm thick top cover
6.48
-
-
10.7
Providing and fixing ball bearing for rolling shutters.
2
-
-
13.52.1
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied
as per manufacturer's specifications including appropriate priming coat,
preparation of surface, etc. complete.On steel work
7.2
-
-
OD18116/2024-2025
Providing and laying antiskid vitrified floor tiles in different sizes (thickness to be
specified by the manufacturer) with water absorption less than 0.08% and conforming
to IS : 15622, of
approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1
cement : 4 coarse sand), including grouting the joints with white cement and
matching pigments etc., complete. Size of Tile 600 x 600 mm
195.08
-
-
11.46.2
Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by
manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622,
of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm
thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the
joint with white cement & matching pigments etc. complete.Size of Tile
600x600 mm
9.09
-
-
11.49.2
Providing and laying Vitrified tiles in floor with different sizes (thickness to be
specified by the manufacturer), with water absorption less than 0.08% and
conforming to IS : 15622, of approved brand & manufacturer, in all colours and
shade, laid with cement based high polymer modified quick set tile adhesive (water
based) conforming to IS : 15477, in average 6 mm thickness, including grouting of
joints (Payment for grouting of joints to be made separately).Size of Tiles 600x600
mm
195.08
-
-
OD21263/2024-2025
Grouting the joints of flooring tiles having joints of 5 mm width, using epoxy grout
mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg
of resin per kg). including filling /grouting and finishing complete as per direction of
Engineer-in-charge.Size of Tile 600x600 mm
204.17
-
-
26.25
Providing and fixing 15 mm thick false ceiling tiles at all heights with integral
densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of
Size 595x595 mm of approved texture, design and patterns having NRC (Noise
Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of
85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per
BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <
0.043 W/m K as per ASTM 518:1991,in true horizontal level on the existing frame
work consisting of T-sections and Lsections suitably fixed according to tile size as per
direction of Engineer-in-charge.
212.86
-
-
OD17664/2024-2025
Providing and fixing computerised numerical control cut using 8 mm thick multi
wood for eves board including all materials as per direction of engineer in charge etc.
complete
80
-
-
OD17665/2024-2025
Providing and fixing multy equal junction/manhole/inspection chamber of required
degree with access door, insertion rubber washer 3 mm thick, bolts and nuts
complete:
100x100x100x100 mm Upvc as per IS- 1729
4
-
-
OD17666/2024-2025
Providing & laying on roof ceramic ridge tile of 20 mm thickness and of
approved pattern on steel frame work complete (steel frame work to be paid
separately ).
30
-
-
OD17667/2024-2025
Providing & fixing on roof pressed ceramic roof tile of 10 mm nominal thickness
and of approved size 300x400 mm and as per approved pattern on steel frame work
complete (steel frame work to be paid separately)
319.6
-
-
9.63.1
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type)
with necessary screws etc. complete:250x10 mm
6
-
-
9.103
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI
marked, with six levers and a pair of anodised (anodic coating not less than grade AC
10 as per IS: 1868) aluminium lever handles of approved quality with necessary
screws etc . complete
4
-
-
OD17668/2024-2025
Supplying Round Padlock of approved brand with 7 levers locking mechanism and 3
numbers of key set etc as specified as per the direction of engineer in charge
2
-
-
50.18.7.4.2
Providing and fixing PVC, pipes fittings including fixing the pipe with clamps at 1.00
m spacing. this includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm
dia 6 Kgf/cm2 - internal work- Exposed on wall
25
-
-
50.18.8.3.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work, including cutting chases and making good the wall etc. 25 mm pipe
10kgf /cm2
30
-
-
50.18.8.7.1
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes with one step PVC solvent cement and
testing of joints complete as per direction of Engineer-in-Charge. Concealed work
including cutting chases and making good the wall etc. 63 mm pipe 6 Kgf/cm2
25
-
-
16.68
Providing and laying 60 mm thick factory made cement concrete interlocking paver
block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and
pattern over and including 50 mm thick compacted bed of coarse sand, filling the
joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
262.5
-
-
Electrical work
-
-
-
1.10.1
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm
FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC
conduit,
with modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FRLS
PVC insulated copper conductor single core cable etc as required.Group A
272
-
-
1.10.2
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm
FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC
conduit,
with modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FRLS
PVC insulated copper conductor single core cable etc as required.Group B
49
-
-
1.10.3
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm
FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC
conduit,
with modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FRLS
PVC insulated copper conductor single core cable etc as required.Group C
62
-
-
1.55.1
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell
point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper
conductor single core cable in surface/ recessed PVC conduit, and earthing the point
with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as
required.Group A
28
-
-
1.33
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden
block including connection etc as required.
392
-
-
1.17.3
Supplying and drawing following sizes of FRLS PVC insulated copper conductor,
single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X
1.5 sq.mm
1115
-
-
1.17.12
Supplying and drawing following sizes of FRLS PVC insulated copper conductor,
single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x
2.5 sq. mm
340
-
-
1.17.21
Supplying and drawing following sizes of FRLS PVC insulated copper conductor,
single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x
4 sq. mm
340
-
-
1.14.2
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of
FRLS PVC insulated copper conductor, single core cable in surface / recessed
medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
80
-
-
1.14.3
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of
FRLS PVC insulated copper conductor, single core cable in surface / recessed
medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire
150
-
-
OD17269/2024-2025
Supply and fixing of ferrules on wire for circuit identification, as required (Any make
approved by CPWD/KPWD/KSCADC) 1.5 to 2.5sqmm wire
300
-
-
OD17268/2024-2025
Supply and fixing of ferrules on wire for circuit identification, as required (Any make
approved by CPWD/KPWD/KSCADC) 4sqmm wire
70
-
-
OD17267/2024-2025
Supply and fixing of connector bar (including connection of wires 1 to 1.5sqmm) for
loop circuit connections or as required in an establishment of circuit connection (Any
make approved by CPWD/KPWD/KSCADC) 6mm
100
-
-
OD17266/2024-2025 Supply and fixing of connector bar (including connection of wires 2.5sqmm) for loop
circuit connections or as required in an establishment of circuit connection (Any
make approved by CPWD/KPWD/KSCADC) 10mm
50
-
-
OD17265/2024-2025
Supply and fixing of connector bar (including connection of wires 4 to 10sqmm) for
loop circuit connections or as required in an establishment of circuit connection (Any
make approved by CPWD/KPWD/KSCADC) 16mm
80
-
-
90.1.1.1
Supply and laying medium gauge PVC conduit of the following sizes conforming to
IS 9537/1983 Part III in roof slab, jointing the pipes with PVC solvent cement, tying
& fixing the conduit firmly with the re-inforcement etc. as required.20 mm
60
-
-
1.21.1
Supplying and fixing of following sizes of medium class PVC conduit along with
accessories in surface/ recess including cutting the wall and making good the same in
case of recessed conduit as required.20 mm
1080
-
-
1.21.2
Supplying and fixing of following sizes of medium class PVC conduit along with
accessories in surface/ recess including cutting the wall and making good the same in
case of recessed conduit as required.25 mm
330
-
-
1.21.4
Supplying and fixing of following sizes of medium class PVC conduit along with
accessories in surface/ recess including cutting the wall and making good the same in
case of recessed conduit as required.40 mm
10
-
-
1.21.5
Supplying and fixing of following sizes of medium class PVC conduit along with
accessories in surface/ recess including cutting the wall and making good the same in
case of recessed conduit as required.50 mm
10
-
-
1.26
Supplying and fixing modular blanking plate on the existing modular plate &
switch box excluding modular plate as required.
24
-
-
1.31
Supplying and fixing suitable size GI box with modular plate and cover in front on
surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be
used in non residential buildings)
18
-
-
1.32
Supplying and fixing suitable size GI box with modular plate and cover in front on
surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps
modular socket outlet and 15/16 amps modular switch, connection etc. as required.
35
-
-
1.56
Supplying and fixing suitable size Gl box with modular plate and cover in front on
surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket
outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light
plugs to be used in non residential buildings).
82
-
-
90.2.1.6
Supply and wiring points according to IS 732-1989 using rigid PVC conduit of
minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with
suitable size specials conforming to IS 3419-1988, fixing the conduit using metal
saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm
FRLS PVC insulated stranded single core copper conductor cable 650V grade,
including providing switch board main and continuous earthing with No.14 SWG
bare copper,required quantity of copper earth socket, brass bolt and nut crimping/
soldering etc complete with suitable size modular type metal switch boxes, modular
type front plates (white) etc. up to and including 6A modular type SP switches and
making good the surface of wall, colour washing etc. complete. All the terminations
in the switch boards and DB's shall be tinned and the wires shall be drawn and
fixed along the periphery of the box using suitable ties, tie mounts etc as required.
(RoHS compliant modular accessories).Combined plug point with 6 A, 5 pin plug
socket controlled by 6 A, switch in the same switch board as that of light points
30
-
-
1.24.3
Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as
required.15/16 amp switch
6
-
-
1.24.5
Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as
required.6 pin 15/16 amp socket outlet
6
-
-
1.27.1
Supplying and fixing following size/ modules, GI box alongwith modular base &
cover plate for modular switches in recess etc as required.1 or 2 Module
(75mmX75mm)
68
-
-
1.27.2
Supplying and fixing following size/ modules, GI box alongwith modular base &
cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)
17
-
-
90.10.3.15
Supply and Fixing the following modular switches & accessories in the existing
front plates and giving necessary connections as required (RoHS compliant )32A DP
switch with indicator
27
-
-
90.10.3.32
Supply and Fixing the following modular switches & accessories in the existing
front plates and giving necessary connections as required (RoHS compliant )25A 3
pin plug top with indicator
15
-
-
90.10.3.33
Supply and Fixing the following modular switches & accessories in the existing
front plates and giving necessary connections as required (RoHS compliant )25A 3pin
Shuttered socket
25
-
-
1.24.7
Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as
required.TV antenna socket outlet
6
-
-
OD17463/2024-2025
Supply and fixing of USB Socket for Switch Board,Dual USB Modualar for Switch
Board,Fast Wall Charger for Roma Plates,Type A USB Port Electrical Panel
Charging with Switch LED-5V-1A & 2.5
Connectivity TechnologyUSB, Connector TypeUSB Type A, Compatible
DevicesApple, samsung, one plus, redmi, Compatible Phone ModelsSamsung ,Apple
, Redmi , Vivo,oppo
Included Componentsadapter, Special FeatureFast Charging, ColourWhite, Input
Voltage230 Volts (AC), Mounting TypeWall Mount
6
-
-
90.11.1.20
Supply and installation of sheet steel, phosphatised and painted, dust and vermin
proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus
and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable
anchor bolts or fixed in recess including cutting hole on the wall , making good the
damages, colour washing etc. as required8 way (8+12) - double cover TPN vertical
DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP
42/43)
1
-
-
90.14.10.4
Supply, conveyance and fixing the following types & current rated control gears
& switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in
the existing panel assembly as required.16 A-100A, 25/35 kA (Ics=100%Icu), 4 pole,
current limiting type MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL
1
-
-
OD17467/2024-2025
Supply, installation and commission of TP, 40A, 415V MCB, 'C', curve,
10kA inside DB (Make: Legrand DX3, ABB or any equivalent make approved by
KPWD/CPWD/KSADC)
16
-
-
2.2.1
Providing and fixing following rating and breaking capacity and pole MCCB in
existing cubicle panel board including drilling holes in cubicle panel, making
connections, etc. as required.100 Amp, 16 KA, TPMCCB
2
-
-
2.3.3
Supplying and fixing following way, single pole and neutral, sheet steel, MCB
distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar,
neutral bus bar, earth bar, din bar, interconnections, powder painted including
earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door
4
-
-
2.12.1
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing
MCB DB complete with connections, testing and commissioning etc. as required.40
amps
4
-
-
2.14.2
Supplying and fixing following rating, double pole, (single phase and neutral), 240
volts, residual
current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in
the existing MCB DB complete with connections, testing and commissioning etc. as
required.40 amps
3
-
-
90.11.1.10
Supply and installation of sheet steel, phosphatised and painted, dust and vermin
proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus
and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable
anchor bolts or fixed in recess including cutting hole on the wall , making good the
damages, colour washing etc. as required4 way (8+12) - three phase double cover (IP
42/43)
3
-
-
90.11.1.11
Supply and installation of sheet steel, phosphatised and painted, dust and vermin
proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus
and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable
anchor bolts or fixed in recess including cutting hole on the wall , making good the
damages, colour washing etc. as required6 way (8+18) - three phase double cover (IP
42/43)
2
-
-
90.11.1.12
Supply and installation of sheet steel, phosphatised and painted, dust and vermin
proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus
and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable
anchor bolts or fixed in recess including cutting hole on the wall , making good the
damages, colour washing etc. as required8 way (8+24) - three phase double cover (IP
42/43)
5
-
-
90.11.1.18
Supply and installation of sheet steel, phosphatised and painted, dust and vermin
proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus
and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable
anchor bolts or fixed in recess including cutting hole on the wall , making good the
damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical
DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP
42/43)
1
-
-
2.13.1
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing
MCB DB complete with connections, testing and commissioning etc. as required.40
amps
9
-
-
2.15.2
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts,
residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in
the existing MCB DB complete with connections, testing and commissioning etc. as
required.40 amps
7
-
-
2.15.3
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts,
residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in
the existing MCB DB complete with connections, testing and commissioning etc. as
required.63 amps
5
-
-
2.16
Supplying and fixing DP sheet steel enclosure on surface/ recess along with
25/32amps 240 volts "C" curve DP MCB complete with connections,
testing and commissioning etc. as required
2
-
-
90.11.1.14
Supply and installation of sheet steel, phosphatised and painted, dust and vermin
proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus
and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable
anchor bolts or fixed in recess including cutting hole on the wall , making good the
damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical
DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/
TP MCB as outgoing (IP 42/43)
2
-
-
2.13.2
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing
MCB DB complete with connections, testing and commissioning etc. as required.63
amps
9
-
-
2.10.1
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve,
miniature circuit breaker suitable for inductive load of following poles in the existing
MCB DB complete with connections, testing and commissioning etc. as
required.Single pole
154
-
-
2.11
Supplying and fixing single pole blanking plate in the existing MCB DB complete
etc. as required.
115
-
-
90.11.1.15
Supply and installation of sheet steel, phosphatised and painted, dust and vermin
proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus
and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable
anchor bolts or fixed in recess including cutting hole on the wall , making good the
damages, colour washing etc. as required6 way (8+18) - double cover TPN vertical
DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/
TP MCB as outgoing (IP 42/43)
2
-
-
2.23.4
Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following
single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/
recess, complete with testing and commissioning etc. as required. 2For 14 way,
Double door SPN MCBDB
2
-
-
2.24.1
Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following
triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess,
complete with testing and commissioning etc. as required.For 4 way, Double door
TPN MCBDB
6
-
-
2.24.2
Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following
triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess,
complete with testing and commissioning etc. as required.For 6 way, Double door
TPN MCBDB
1
-
-
2.25
Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for tripple
pole and neutral, sheet steel, Vertical MCB distribution board, 415 V, on surface/
recess, complete with testing and commissioning etc. as required.
4
-
-
2.24.3
Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following
triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess,
complete with testing and commissioning etc. as required.For 8 way, Double door
TPN MCBDB
1
-
-
90.12.6.42
Supply & laying of one No. PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1 KV grade of the following sizes in the existing
masonry open duct as required.4 core 25 sq mm
9
-
-
90.12.6.43
Supply & laying of one No. PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1 KV grade of the following sizes in the existing
masonry open duct as required.4 core 35 sq mm
110
-
-
90.12.7.42
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.4 core 25 sq mm with factory made clamp
20
-
-
90.12.7.43
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.4 core 35 sq mm with factory made clamp
100
-
-
9.1.34
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.4 X 25 sq. mm (28mm)
6
-
-
9.1.35
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.4 X 35 sq. mm (32mm)
10
-
-
OD17474/2024-2025
Supply and fixing of copper grounding clips (shim) 60 mm long x 20 mm wide x 1.20
mm thick for single compression glands for cable size 25sqmm to 95sqmm
16
-
-
90.12.6.3
Supply & laying of one No. PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1 KV grade of the following sizes in the existing
masonry open duct as required.2 core 10 sq mm
9
-
-
90.12.1.3
Supply & laying of one number PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1KV grade of the following sizes in ground including
excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but
excluding sand cushioning and protective covering (in ordinary soil).2 core 10 sq mm
78
-
-
90.12.7.3
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.2 core 10 sq mm with factory made clamp
35
-
-
9.1.2
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV
grade as required.2 X 10 sq. mm (19mm)
6
-
-
90.12.6.40
Supply & laying of one No. PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1 KV grade of the following sizes in the existing
masonry open duct as required.4 core 10 sq mm
207.4
-
-
90.12.7.40
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp
85
-
-
90.12.1.41
Supply & laying of one number PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1KV grade of the following sizes in ground including
excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but
excluding sand cushioning and protective covering (in ordinary soil).4 core 16 sq mm
261
-
-
90.12.6.41
Supply & laying of one No. PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1 KV grade of the following sizes in the existing
masonry open duct as required.4 core 16 sq mm
20
-
-
90.12.5.43
Supply & laying of one number PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/
HUME / STONE WARE/ GI/ DWC pipe as required.4 core 35 sq mm
20
-
-
9.1.32
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.4 X 10 sq. mm (25mm)
86
-
-
9.1.33
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.4 X 16 sq. mm (28mm)
10
-
-
90.12.7.41
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp
60
-
-
OD17263/2024-2025
Supply and fixing of copper grounding clips (shim) 60 mm long x 12 mm wide x 1
mm thick for single compression glands for 4sqmm to 16sqmm cables.
38
-
-
90.12.9.2
Supplying, laying and jointing of the following sizes of double wall corrugated
(DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical
protection to underground power cables with all required accessories in ground in the
existing trench50/38 mm or nearest size
3739
-
-
90.12.9.3
Supplying, laying and jointing of the following sizes of double wall corrugated
(DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical
protection to underground power cables with all required accessories in ground in the
existing trench63/50 mm or nearest size
760
-
-
OD17234/2024-2025
Supply, laying and fixing of following DWC pipe on wall surface for the protection
of cables with MS clamp 25x3 (painted) - 50/38mm.
44
-
-
90.16.2.3
Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of
suitable size and refilling etc, as required.32 mm dia G.I pipe ( medium class)
12
-
-
5.4
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including
accessories, and providing masonry enclosure with cover plate having locking
arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as
required.
32
-
-
OD17262/2024-2025
Supply and fixing of Cable Zip Ties, White (100 mm x 2.5 mm,4" inch) MultiPurpose Self-Locking Nylon Teeth Grip Cable Ties Cord Management Ties, Plastic Ties for cables, industries, Workshop
1000
-
-
90.16.1.9
Supply and drawing bare earthing conductors of the following sizes along with
wiring/ cables and giving connection as required2.64 mm GI conductor (12 SWG)
500
-
-
5.14
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for
connections etc. as required.
6
-
-
90.16.1.2
Supply and drawing bare earthing conductors of the following sizes along with
wiring/ cables and giving connection as required2.65 mm copper conductor (12
SWG)
705
-
-
90.16.1.3
Supply and drawing bare earthing conductors of the following sizes along with
wiring/ cables and giving connection as required3.15 mm copper conductor ( 10
SWG)
4652
-
-
90.16.5.2
Supply of superior quality copper earth socket for the following size of earth
conductor including crimping etc. as required.2.65 mm (12 SWG)
24
-
-
90.16.5.3
Supply of superior quality copper earth socket for the following size of earth
conductor including crimping etc. as required.3.15 mm (10 SWG)
384
-
-
OD17230/2024-2025
Supply and installation of weatherproof single/three phase Energy meter box with
provision for HRC fuses - 3Nos/1No.., Neutral Link - 1No. and a 4P/DP isolator,
made in fiber. Double Door. Including all accessories for installation. Approved
Make by CPWD/KPWD/KSCADC
4
-
-
90.14.1.2
Fabrication, supply, conveyance, installation testing and commissioning of floor or
wall mounting, dust and vermin proof, cubicle type MV panel board comprising of
the following components/ devices & complying to IS 8623.<br>
Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly
as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved
design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided
copper conductor, providing necessary cut-outs for mounting meters, relays,
indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber
and cable alley, powder coating the assembly after subjecting to 7 tank process etc as
required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles
etc shall not be used for the fabrication of panel assembly. The measurments will be
taken the area of the complete sheets used for panel board including partitions,
folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA
sheet, powder coated (excluding base frame)
19
-
-
OD17522/2024-2025
Supply and fixing of 2 Way neutral links mounted on DMC/SMC base - 63A
4
-
-
90.14.3.3
Supply and providing heavy duty 'A' section neoprene gasket in the panel
boardSupply and providing 'U' section PVC beeding in the panel board
30
-
-
90.14.2.1
Supply and providing 2mm SMC sheet as shrouding for bus interconnection /
terminations etc. including required nut & bolt etc.
0.5
-
-
90.14.4
Supply and fabrication conveyance and installation of base frame of panel board
using 75 x 40 mm rolled steel channel (ISMC)
4
-
-
90.14.5
Supply and fabrication conveyance and installation of angle iron frame work for wall
mounting panel board
54
-
-
90.14.6
Supply and providing copper bus bars including finger type SMC bus bar supports in
the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as
required.
1400
-
-
90.14.7
Supply and providing copper earth bus in the panel board
300
-
-
OD19033/2024-2025
Supply, fixing, installation and commissioning of Three Phase multifunctional meter
(MFM) in the existing panel board or as required. (Approved make by CPWD/KPWD/KSCADC)
1
-
-
OD19034/2024-2025
Supply, fixing and installation of LED panel board lights - Red/Green color.
(Approved make by CPWD/KPWD/KSCADC)
1
-
-
OD19035/2024-2025
Supply, fixing and installation of Voltage Indicator 22mm LED Digital Display
Voltmeter Lights 220 Volt AC RYB (RED, YELLOW, BLUE). (Approved make by
CPWD/KPWD/KSCADC)
1
-
-
2.1.1
Providing and fixing following capacity TP&N disconnector fuse switch unit
inside the existing panel board with ISI marked HRC fuses including drilling holes in
cubicle panel, making connections, etc. as required.32 Amp TP & N
5
-
-
2.1.2
Providing and fixing following capacity TP&N disconnector fuse switch unit
inside the existing panel board with ISI marked HRC fuses including drilling holes in
cubicle panel, making connections, etc. as required.63 Amp TP & N
4
-
-
OD17523/2024-2025
Supply and fixing of HRC Fuse Base with HRC Fuse link - 63A
45
-
-
OD19132/2024-2025
Supply and fixing of FP, 100A on load change over switch in enclosure/panel
1
-
-
90.4.5.4
Supply, Installation, testing and commissioning of ceiling fan of following sizes
including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm
FRLS PVC insulated, copper conductor, single core cable etc. as required.
1200mm sweep - ceiling fan complete with service value minimum 4.0(cub
meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding
suitable for 230V/240V single phase AC supply
50
-
-
OD17595/2024-2025
Supply of 900mm sweep Ceiling fan, complete with 300mm down rod, canopies,
shackles, blades, Strong & Powerful Copper motor, Air Delivery: 140
m³/min, RPM: 430- and 2-Year Warranty without resistance type regulator
working on 230/240V single phase A/C. (Make: Havells, Kulirma etc... or equivalent
make approved by CPWD/KPWD/KSCADC)
2
-
-
90.4.3
Conveyance installation testing and commissioning ceiling fan of all sizes using
standard accessories excluding resistance type regulator wiring the down rod with
16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper
conductor flex wire or extending the original wiring etc. as required.
2
-
-
90.4.1
Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per
IS 732 as required.
22
-
-
90.4.2
Supply and installation of suitable size MS belt type fan clamp fabricated from flat
iron 40 x 6 mm, 150mm long x 2 Nos with M.S. rod bent to shape, neatly painted
with 2 coats of enamel paint over a coat of red oxide primer as per IS 732 as required
22
-
-
1.25
Supplying and fixing two module stepped type electronic fan regulator on the existing
modular p
44
-
-
OD17596/2024-2025
Supply and installation of LED strip light/Flexible Rope Light for Indoor and
Outdoor Decorations, Rope Light for False Ceiling, Balcony, Warm/White, Pack of 1
(5M length) (warm/white) with waterproof, made from silicon, good quality adaptor.
(Philips or equivalent make approved by CPWD/KPWD/KSCADC)
22
-
-
OD17597/2024-2025
Supply and installation of hanging light (decorative), single pendant type chandelier,
28W, created to relive the old-world charm and luxury, while still being relevant to
the modern time with mirror stainless steel finish of these fixtures bring out the best
effects of sparkling crystal beads inside. (Make: Philips model 582067 or equivalent
make approved by CPWD/KPWD/KSCADC).
8
-
-
OD17737/2024-2025
Supply and fixing of glass hanging luster light pendant with warm LED decorative
type ideal for hanging on ceiling indoor and outdoor with LED lamp and holder
16
-
-
OD17598/2024-2025
Supply and installation of 12W LED Gate Light 20" Mushroom Waterproof
Pillar Lamp Outdoor Decor Bollard Garden Lighting Pole Mount Exterior Fixture for
Home/commercial place Entrance Patio Compound Boundary (Warm/ White).Crafted with die-casting materials, robust durability and longevity. Designed to
withstand various weather conditions, making it ideal for year-round outdoor use.
(Make: Gigawatts G01
2
-
-
OD17599/2024-2025 Supply and installation of wall washer two-way vertical flush mount LED wall light
10W for outdoor decoration (warm/white), wide voltage range (140-360) V with
surge protection of 2.5kV
2
-
-
OD17600/2024-2025
Supply and installation of 2-Watt LED COB Light (spotlight) (Warm/White) (round),
Metal sink for durable performance, long life COB LEDs and BIS certified, Wide
voltage and surge protection for indoor and outdoor usage, flush mount. Warranty: 1
year on product from date of invoice. (Make Philips: 58914-pk2 or equivalent
make approved by CPWD/KPWD/KSCADC)
24
-
-
OD17601/2024-2025
Supplying and fixing following SLEEK RD- surface mounted or recessed Round or
Square Down light 112545 BGSLO Sleek surface 18/20W cool white LED down
light for soft diffused lighting complete light out put on ceiling / wall including
connection with 1sq.mm FRLS PVC insulated copper conductor multi stranded three
core cable etc as required (Make Philips, Crompton Greeves or equivalent make
approved by CPWD/KPWD/KSCADC) testing and commissioning
39
-
-
OD17689/2024-2025
Supply and installation of Hexa style 8W Down lighter (Cool Day Light), Cutout - 4
Inch | Panel Light for False Ceiling (Poly carbonate) (Make: Philips or equivalent
make approved by CPWD/KPWD/KSCAD)
8
-
-
90.3.19.3
Supply conveyance, installation, testing and commissioning the light fittings of
following types made from CRCA sheet 0.5mm thickness with all accessories and
lamps directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated
and sheathed round copper conductor flex wire or extending the original wiring and
giving connections as required1200 mm 1X20W LED Lamp with box type fixture
87
-
-
OD17602/2024-2025
Supply and installation of wall light (bulkhead), IP65 fixture, black colour,
aluminium body with integrated LED, 9W. (Make Philips model 58172 or equivalent
make approved by CPWD/KPWD/KSCADC)
15
-
-
1.58
Supplying and fixing PVC batten/ angle holder including connection etc. as required.
17
-
-
OD17261/2024-2025
Supply and fixing of B22 LED Cool Day White LED Bulb - 9W. (Approved make by
CPWD/KPWD/KSCADC)
43
-
-
OD17603/2024-2025
Supply of 150mm sweep Light Duty Exhaust fan in plastic body with self-opening
lowers working on 230V single phase A/C. Approved make by
CPWD/KPWD/KSCADC.
13
-
-
OD17239/2024-2025
Supply of Light Duty Exhaust fan in plastic body with self-opening lovers working on
230v single phase A/C - 250mm
1
-
-
OD17604/2024-2025
Supply and installation of 450 mm sweep, 900 rpm Heavy Duty Exhaust fan working
on 230 V A/C
1
-
-
OD17233/2024-2025
Supply and installation of LED Batten 10W, 2 feet LED lighting fixture - Mirror
Lamp with extruded Aluminum heat sink, environmentally friendly, energy efficient
prewired with lamp, AC 230V, ISI marked. Make: Philips model No. BN021C LED
12S-6500 or equivalent in other makes as specified in the list of manufacturers
complete all as specified, approved by CPWD/KPWD/KSCADC
5
-
-
OD17260/2024-2025
Supply, fixing and installation of PVC Waterproof Bulkhead outdoor type with B22
Holder (Regular Pin Type) for Which LED Bulb Easily Available in Market. (Bulb
not Included) Color: White (Approved make by CPWD/KPWD/KSCADC)
26
-
-
90.15.4.2
Supply Conveyance, installation, testing and commissioning of 36/40W LED street
light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip
make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal
surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated
housing,acrylic cover complete with THD less than 10%, power factor greater than
0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver
compartment should be seperatly accessible for maintenance (LM 79&80
certificates from NABL accredited Third party lab to be produced mentioning chip
manufacturer)
88
-
-
90.15.4.7 Supply Conveyance, installation, testing and commissioning of 100W LED Flood
light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip
make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal
surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,
acrylic cover complete with THD less than 10%, power factor greater than 0.98,
RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment
should be seperatly accessible for maintenance (LM 79&80 certificates from
NABL accredited Third party lab to be produced mentioning chip manufacturer)
8
-
-
11.6.1
Supplying and embedding following dia G.I. pipe (medium class) in pole collar/
foundation
(during casting) for cable entry including bending the pipe to the required shape
complete as required.32 mm dia
32
-
-
OD17605/2024-2025
Supply and installation of Bed lamp 28W created to relive the old-world charm and
luxury, while still being relevant to the modern time, mirror stainless steel. (Make:
Philips model582070 or equivalent make approved by CPWD/KPWD/KSCADC)
12
-
-
1.38
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as
required.
3
-
-
OD17462/2024-2025
Supply of LED recessed mount 600mmx600mm luminaire having power
consumption not more than 33W and light output not less than 3600Lumens with
system efficacy >120Lumen/Watt. Luminaire housing shall be made from single
piece CRCA body without welding to avoid RUSTING and PRISMATIC DIFFUSER
to reduce glare. The luminaire should be should be having minimum 50000 burning
hours (L70B50) with CRI≥80, SDCM<5 and co-related colour temperature
(CCT) of 650K. The luminaire must have 4kV surge protection integrated in driver,
ripple<5%, UGR<19, PF≥0.95, Total Harmonic Distortion THD≤10%,
EMI/EMC compliant and operating voltage range 140-270V with high voltage cut off
@325±15V with auto restart feature, luminaire and driver shall be separately
BIS approved of same make equivalent to Philips/kesslec/osram. LM80, LM79, Type
test certificate and BIS certificate need to be submitted for approvals. (Make: Philips
or equivalent make approved by CPWD/KPWD/KSCADC)
32
-
-
OD17464/2024-2025
Supply, fixing and installation of instant water geyser with a capacity of 3 litres, a
superior 3 kW heating element with a copper sheath and high-grade magnesium oxide
insulation for quick movement of heat Pressure release valve for safer operations at
higher pressures, ISI marked thermostat for cutting off power supply when
temperature exceeds 55°C, Overheating protection through disc type snap action
safety device operating at 90°C & Anti-siphon Protection for preventing the reverse flow of water, Robust Inner Tank made of high-grade 304 Stainless Steel |
Rust-proof high-quality engineering polymer constitutes the Outer Body, preventing
rust formation, a warranty of 2 Year on Product, 2 Year on Heating Element and 5
Year on Inner Tank. Including the Inlet and Outlet Connection Pipes. (Make:-
Approved make by CPWD/KPWD/KSCADC)
6
-
-
OD17466/2024-2025
Supply, Installation and Commissioning of 1.5 Ton 5 Star Convertible 5 in 1 Cooling
Inverter Split Air Conditioner including mounting stand with the following
specifications. Variable speed compressor which adjusts power depending on heat
load. Fix & Lock 5 in 1 Convertible cooling mode to run your AC at 5 different
capacities as per the desired comfort. 5 Star. Annual Energy Consumption: 770.98
units. ISEER Value: 5.02, Voltage/Frequency-230 V / 50Hz, Cooling Rated Power
Input -1315 Watt, the star rating is as per new BEE guidelines effective from 1st July
2022. Copper Condenser Coil. Noise Level: 30.8(db) Ambient Temperature: 54
degrees Celsius. 100% Copper, Comfort Sleep, Auto Restart with Memory Function,
Turbo Cooling, Evaporator Fins-Hydrophilic-Blue, Special PCB Metal Enclosure(
with Three Year warranty and all the necessary items to fix the Air Conditioner)
(Make: Bluestar or equivalent make approved by CPWD/KPWD/KSCADC)
12
-
-
OD17465/2024-2025
Supply, fixing and installation of AC Stabilizer for 1.5-ton Inverter AC. (Make VGuard or equivalent make approved by CPWD/KPWD/KSCADC)
12
-
-
OD17688/2024-2025
Supply and fixing of Dome ceiling light offers cool day light (32W) (tunable) and
when the day winds down, the very same ceiling light switch to a warm white light,
for that perfect evening! ideal for big rooms and even for places like kitchen where
bright light is needed for cooking. • Bright light output • Tunable white
(Make Philips: Model 582010 or equivalent make approved by
CPWD/KPWD/KSCADC)
3
-
-
OD17531/2024-2025
Supply of Wireless Fiber Router (Black, Dual Band) with 2 External Dual Band
Antennas, Easy Remote Management. Superfast Dual Band Wi-Fi ---- Up to 1.2Gbps
Wi-Fi speed, 300Mbps 2.4GHz, 867Mbps 5GHz Full Gigabit Port ---- Up to 10x
faster than standard Ethernet, deliver lightning-fast wired performance Supports
VOIP Calls ---- Simply make or receive phone calls over the Internet Easy Remote
Management ---- Supports the ONT Management and Control Interface (OMCI), easy
to configure and manage remotely from an OLT Smooth Connection ---- Supports
VLAN, 802.1q, smooth network connection for IPTV and other services (Make:
DLink, TPLink... or equivalent make approved by CPWD/KPWD/KSCADC)
5
-
-
90.12.10.3
Supply & laying of DWC pipe in ordinary soil 0.75m below ground level
including excavation63/50 mm or nearest size
580
-
-
90.15.3.4
Supply installation testing and commissioning of Octogaonal Pole made of hot dip
galvanised GI sheet 70 mm top diameter, 130 mm bottom diameter thickness 3mm
base plate dimensions of 200x200x12 mm suitable for wind speed as per IS 875 Part
III double arm bracket 0.5mt including connector foundation bolt 4 nos fixed in
existing RCC foundation and junction box etc. complete 6 Meters
34
-
-
90.15.1.1
Supply installation testing and commissioning of Octogaonal Pole made of hot dip
galvanised GI sheet 70mm top diameter. 130mm bottom diameter thickness 3mm
base plate dimensions of 200x200x16mm suitable for windspeed as per IS 875 Part
III fixed head frame including round arm luminary carriage suitable to install 4/6 nos
luminaries in symmetrical arrangement including connector foundation bolt 4 nos
existing RCC foundation and junction box etc, complete 8 Meters
2
-
-
1.49
Numbering of ceiling fan / exhaust fan/ fluorescent fittings as required.
310
-
-
OD17594/2024-2025
Labour charges for removing/dismantling the existing conduit, wire, cable, LAN
cable, Electrical inventories etc… and placing them on an appropriate place for
further actions.
3
-
-
OD17235/2024-2025
Supply and providing First Aid Box with first aid medicines and accessories. Color:
Red & White, Size:11Inch * 13 Inch * 3 Inch (W x D x H). Made from galvanize
Metal with 7 Way Processed Powder Coating for Long Lasting. Front Heavy Clear
acrylic. 4 Partition for medicines organize with lock and 2 set of key. Top side handle
for carry to any where and also Wall Mountable.
12
-
-
OD17236/2024-2025
Supply of Fire Bucket Stand with 2 Bucket and sand. Material : Iron. Ring Handle
Mounted
7
-
-
OD17237/2024-2025
Supply and providing laminated First Aid chart duly framed and placed in a
conspicuous location for clear vision.
6
-
-
OD17238/2024-2025
Supply, fixing and installation of ABC Powder Type 6 Kg Fire Extinguisher (Red and
Black) effective for all types of fire like Class A, B and C types of fires as well as Electrical fires and also ABC Powder Type (Stored Pressure) Fire Extinguisher,
Multipurpose uses with 1 Wall Hook and 1 Discharge Pipe. ISI, ISO and CE Certified
Product and Multipurpose Uses ABC Type fire extinguisher 6 Kg with 5 years
Warranty. (Approved make by CPWD/KPWD/KSCADC)
14
-
-
OD19562/2024-2025
Supply Installation, Testing and commissioning of ANALOG ASTRONOMICAL
PRE-WIRED TIMER DB of the following specification. Timelite-16A 3Pole/230VAnalog Time switch. with 3 no of 3P outgoings, all connections and fittings are preset and pre-wired at company at the time of manufacturing.
Aesthetically appealing with locking facility
• IP54 degree of protection
• Switch On-Off street lights on time scheduling basis by incorporating an
analog/digital time switch and contactor.
• Rating of contactor depends on the luminaires and wattage of lighting loads
Conforms to IEC 60439
4
-
-
OD19564/2024-2025
Supply, erection, testing and commissioning of 45 KVA DG set with Engine - Ashok
Leyland 4 Cylinder 4CTDG1-inline or equivalent approved brands, developing 60.32
BHP @1500 RPM, Radiator cooled/ Turbo charged/ After cooled/ Electronic fuel
injection system/ flywheel complete with wiring harness with first fill of lubrication
oil and coolant Alternator:- Leypower
KVA/32KW/3/415V/0.8P.F/50Hz@1500rpm/3Phase bearing/ IP23 protection/ class
F insulation Fuel tank: - Diesel tank with 140 Liters capacity with fuel supply and
return connection with fuel measurement gauge. Battery:-Exide Battery 12V with
battery leads( or any approved brand) Residential Silencer:-Leyland approved
Residential silencer with flexible bellow with tail pipe with flange for extension or
any equivalent approved brand . Control Panel:- Standard Control Panel
45KVA/36KW with Amf logic Sedemac controller- 200A-MCCB, CT coils
Indication lamps, Instrument fuses, control wiring, Power cable:- Finolex copper
flexible cable single core from alternator to panel with hose Acoustic Enclosure:-
Enclosure with 10/12/14 SWG HR formed sturdy common base frame on which
Engine& alternator mounted on AVM pads along with Fuel tank, batteries,
control panel, & 16/18SWG modular/integrated CRCA Acoustic Enclosure/ fire
retardant synthetic foam insulated-40mm/32kg/m3/Pure Polyurethane glossy finish
powder coated with paint for 60-80 microns/fitted with accessories such as SS locks/
hinges/door rubber gasket/View glass/ emergency stop push button/Bottom lifting/top
rope guides/Canopy DC light complying standard noise level norms of 75dB(A)at 1
metre certified by Central Pollution Control Board Delhi & National Aerospace
Laboratories Ltd, Bangalore (make: Ashok Leyland or any equivalent approved
brand)
2
-
-
OD19601/2024-2025
Electrical Inspectorate Approval related paper works Charges including connection
charges agreement charges ,drawing preparation ,Submission etc as required.
Preparation of all drawings and documents, Submission of Completion certificates to
KSEB/Inspectorate for obtaining power connection etc. for commissioning of the whole installation in the premises and erection of up to 40 KVA DG -installation
testing and commissioning along with acquiring approval from inspectorate and
Preparation of all drawings and documents, submitting of Completion certificates to
Inspectorate for the same and complete commissioning with all respects
3
-
-
90.16.1.6
Supply and drawing bare earthing conductors of the following sizes along with
wiring/ cables and giving connection as required6.00 mm copper conductor (4 SWG)
60
-
-
1.17.30
Supplying and drawing following sizes of FRLS PVC insulated copper conductor,
single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x
6 sq. mm
15
-
-
2.17
Supplying and fixing TP sheet steel enclosure on surface/ recess along with
16/25/32amps 415 volts "C" curve TP MCB complete with connections,
testing and commissioning etc. as required.
7
-
-
1.17.31
Supplying and drawing following sizes of FRLS PVC insulated copper conductor,
single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x
6 sq. mm
5
-
-
90.12.5.40
Supply & laying of one number PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/
HUME / STONE WARE/ GI/ DWC pipe as required.4 core 10 sq mm
1245
-
-
90.12.5.31
Supply & laying of one number PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/
HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 95 sq mm
60
-
-
90.12.6.31
Supply & laying of one No. PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1 KV grade of the following sizes in the existing
masonry open duct as required.3.5 core 95 sq mm
10
-
-
90.12.7.31
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.3.5 core 95 sq mm
3
-
-
9.1.24
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.3 1/2X 95 sq. mm (45mm)
2
-
-
90.12.12.6
Supply & laying of DWC pipe in ordinary soil 1.2 m below ground level
including excavation110/94 mm or nearest size
60
-
-
90.6.6.1
Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core
copper conductor flat cable for submersible pump motor conforming to IS 694 part I
1990 as required including giving necessary connections of the following sizes.1.50
sq mm
300
-
-
90.16.5.6
Supply of superior quality copper earth socket for the following size of earth
conductor including crimping etc. as required.6. mm ( 4 SWG)
16
-
-
2.2.2
Providing and fixing following rating and breaking capacity and pole MCCB in
existing cubicle panel board including drilling holes in cubicle panel, making
connections, etc. as required.125 Amp,16 KA,TPMCCB
1
-
-
2.10.3
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve,
miniature circuit breaker suitable for inductive load of following poles in the existing
MCB DB complete with connections, testing and commissioning etc. as
required.Double pole
36
-
-
OD19625/2024-2025
Supply and installation of HRC Fuse Base with HRC Fuse link of the following rating
on the existing panel board/Enclosure, as required. 80A
3
-
-
OD19626/2024-2025
Supply and installation of following rated 2 Way neutral links mounted on DMC/SMC base on panel board/enclosure, as required. 80A
1
-
-
OD20301/2024-2025
Supply and installation of following 2 Way neutral links mounted on DMC/SMC base
in panel board/ Energy meter box. Approved Make by CPWD/KPWD/KSCADC -
40A
1
-
-
OD20302/2024-2025
Supply and fixing of HRC Fuse Base with HRC Fuse link (Approved make by
CPWD/KPWD/KSCADC) - 40A
3
-
-
OD20305/2024-2025
Supply and installation of Automatic Transfer Switch (ATS) with Automatic Mains
Failure (AMF) in the existing panel Board for the following current rating - 125A
[Make: L&T CK90161BOOO (ATS) + ATC2000OOO (AMF controller) or
equivalent make approved by CPW/KPWD/KSCADC)
3
-
-
OD20306/2024-2025
Supply and providing 3 inch MS pipe with all accessories for extending exhaust
pipeline including charges for tools and plants, scaffolding etc. complete
20
-
-
OD20307/2024-2025
Supply of 15 KVA DG set: Supply of "Silent Type" Air cooled Diesel
Generating set along with having Prime Power rating of 15 KVA,415V at 1500
RPM,0.8 lagging power factor at 415V suitable for 50Hz,3 phase system & for
0.85 Load Factor and consisting of the following. Including diesel engine, engine
mounted instrument panel, base frame & foundation, External / in built fuel tank,
Exhaust system , Starting system, Acoustic Enclosure including all accessories etc as
required. KEL/KIRLOSKER GREEN/ Equivalent. Including Freight
1
-
-
OD20320/2024-2025
Supply of RGB LED strip driver 100W Output Current 8.33A IP 67
12
-
-
OD20321/2024-2025
Supply and fixing of 20W RGB Strip LED’s per m -84 pcs Cut. Length
100mm 5M / Roll
12
-
-
OD20322/2024-2025
Supply of 24V SERIES WATERPROOF POWER SUPPLY 60W IP 67 Output
Current 2.5A , Driver for linear wall washer
10
-
-
OD20323/2024-2025
Supply and fixing of Wall Washer - Linear In-Ground Luminaire Input power: 48W
LED compact and minimalist linear recess mounted designed for floor mount. Beam
angle 8° / 12° / 28° /
40° / 64° / 12°x53°. Luminaire made of extruded aluminium
alloy of high corrosion resistance (grade 6063), stainless steel front cover (grade 316)
and non-corrosive stainless steel fasteners. Powder coated aluminium profile
installation housing for preparing the recess opening in ground. Clear toughened
glass. Protection class IP67. Mechanical resistance IK05. Available colour
temperature 2700K / 3000K / 4000K / 5700K, Colour rendering index (CRI) >80.
SDCM-3 MacAdam. K-Lite LED module with expected service life of at least 60,000
operating hours. Constant voltage non integral power supply at 24Vdc assures safety.
Driver efficiency >80%, Surge protection 3KV. Luminaire dimension : 1025mm
length x 68mm width x 83mm height. CE & BIS Certified. Inhouse NABL
accredited lab. With awarranty of 5 years including freight charges. (Make: K-Lite or
equivalent make approved by CPWD/KPWD/KSCADC)
10
-
-
OD20324/2024-2025
Supply and fixing of Input power: 6W LED spike mounted compact spotlight
designed to provide directional light. Beam angle 15° / 25° / 40°.
Luminaire made of pressure die cast aluminium alloy of high corrosion resistance and
non corrosive A2 stainless steel fasteners. Clear toughened glass of 4mm thickness.
Surface mounting spike made of polypropylene black. Hybrid optics with lens &
mirror finish pure aluminium reflector combination for higher efficiency, lower
optical losses with optimum glare suppression. Swivel range of 0°- 90°.
Single cable entrance M10 cable gland. Protection class IP65. Mechanical resistance
IK05. Pure polyester powder coated graphite grey / anthracite grey / jet black.
Available colour temperature 2700K /3000K / 4000K, Colour rendering index
(CRI)>80. SDCM-3 MacAdam. K-Lite LED module with expected service life of
at least 60,000 operating hours. Prewired with LED driver and suitable for operating
on 240V, 50Hz single phase ac supply. Luminaire dimension : 101mm length x
90mm width x 330mm height. CE & BIS Certified. Inhouse NABL accredited
lab. With a warranty of 5 years including freight charges
20
-
-
OD20325/2024-2025
Supply and fixing of Input power: 30W LED post top luminaire. Symmetrical light
distribution. Luminaire made of extruded aluminium alloy (grage 6063) with gravity
die cast aluminium top
closing cover and glass fixing ring of high corrosion resistance and non-corrosive
stainless-steel fasteners. Clear toughened glass. Gravity diecast aluminium bracket
with base suitable for mounting Ø50mm OD pipe. Protection class IP65.
Mechanical resistance IK06. Pure polyester powder coated graphite grey / anthracite
grey / jet black. Available colour temperature 2700K / 3000K / 4000K / 5700K.
Colour rendering index (CRI)>80. SDCM-3 MacAdam. Prewired with LED driver
and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency
>85%, Power factor >0.95, THD <10%, Surge protection 4KV. Luminaire
dimension : 166mm diameter x 605mm height. CE & BIS Certified. Inhouse
NABL accredited lab. With a warranty of 5years including freight charges. (Make: KLite or equivalent make approved by CPWD/KPWD/KSCADC)
14
-
-
OD20326/2024-2025
Supply and erection of 3M - CIRCULAR LIGHTING POLE painted with marine
coated Circular pole made of circular mild steel pipe (grade YST 210) 88.9mm Dia x
2.9mm thick with 2988mm Height. Pole section welded by certified welders using
high end MIG welding processes. PDC aluminium service door 348mm height x
80mm width shall be provided with the company logo embossed on the bottom of the
door and safety rope. The control gear tray is prewired with 2.5 Sq.mm cable,6A SP
MCB and 32A ramanuj stud type 4 way terminal block for loop-in / loop-out
arrangement, 5A 2 way erminal connector and provision for earthing. Any other
internal cables and connections shall not be covered in the scope of supply. Mild steel
mounting plate 200mm Square x 12mm thick Steel of grade E250 to IS2062 : 2011
with 4 elongated holes 38 x 19 to suit M16 x 300mm bolts of grade 4.6 at CC 140.
This mounting steel plate along with foundation bolts of suitable size to be used for
ensuring firm grouting into the specially designed foundation. All dimension are
within +/- 5% tolerance. After fabrication entire pole is shot blasted (Inhouse). The
pole is coated with zinc rich primer & pure polyester powder coating or epoxy
zinc phosphate primer and finished using environmentally stable polyurethane based
paint (coating thickness 60-80 microns). The Pole shall be provided with Graphite
grey / Anthracite grey / Black as standard colour options. With a warranty of 5 years
including freight charges
14
-
-
OD20327/2024-2025
Supply of Foundation Bolt, 4 Nos of M16 x 500 mm bolt with 8 Nuts, 8 Plain Washer
and 8 Spring Washer
8
-
-
OD20328/2024-2025
Supply and erection of Brussel Lighting Pole - 5m painted with marine coated 5M
height Brussel pole made of circular mild steel pipe of two section (grade YST 210)
which is fabricated using 139.7mm diameter x 3.6mm thick base section with
minimum height of 1500mm, the top section is 88.9mm diameter x 2.9mm thick with
minimum height of 3488mm. & 2 Nos. of Die-cast aluminium mounting clamp
(126mm dia x 60mm height) for fixing 4 Nos. of flood light luminaires. Pole mounted
flood light luminaires. Extruded aluminium hood cover integrated with diecast
module; excellent aluminium heatsinks for thermal management with vertical fin
design for longer life of the LEDs. Bracket to facilitate proper aiming of the luminaire
at desired angle. Protection class IP65 optical compartment with polycarbonate
optical lens and Mechanical resistance IK08. The luminaire provided with beam angle
10° / 28° / 45° (Symmetrical light distribution). Available colour
temperature 2700K / 3000K / 4000K /5700K, colour rendering index (CRI)>/=80
and residual flux of 70% (L70) @ 60,000 burning hours. Operating within
temperature range from - 15°C to + 50°C. The luminaire designed to
operate at any voltage from 100V to 300Vac, with Power Factor ≥ 0.95 and shall
be provided with internal surge protection of 6 kV, electrical Class I wattage 50W
± 10%. High power LED (Make: Nichia) with Macadam </= 3. CE &
BIS Certified. Inhouse NABL accredited lab. The pole is to be provided with a
surface mounting suitable base plate 250 mm square x 12 mm thick steel of grade E250 to IS 2062 :
2011. All dimensions are within +/- 5% tolerance. Pole section welded by certified
welders using high end MIG welding processes. 2Nos. of PDC aluminium service
door 348mm height x 110mm width shall be provided with the company logo
embossed on the bottom of the door and safety rope. The control gear tray is prewired
with 2.5 Sq.mm cable, 6A SP MCB and 32A Ramanuj stud type 4 way terminal block
for loop-in / loop-out arrangement, 5A 2 Way terminal connector and provision for
earthing. Any other internal cables and connections shall not be covered in the scope
of supply. The mild steel mounting base plate. The mounting plate provided with 4
elongated holes 38 x 19 to suit M16 x 500mm bolts of grade 4.6 at CC 180 for
alignment of the pole. The base plate has a cable entry hole of 70mm dia at the
center.This mounting steel plate along with foundation bolts of suitable size to be
used for ensuring firm grouting into the specially designed foundation. After
fabrication, entire pole is shot blasted (Inhouse). The pole is coated with zinc rich
primer & pure polyester powder coating or epoxy zinc phosphate primer and
finished using environmentally stable polyurethane based paint (coating thickness 60-
80 microns). The Pole shall be provided with Graphite grey / Anthracite grey / Black
as standard colour options. With a warranty of 5years including freight. (Make: KLite or equivalent make approved by CPWD/KPWD/KSCADC)
8
-
-
OD20329/2024-2025
Supply and fixing of Sleek Bollard Input power: 8W LED Bollard luminaire designed
for surface mounted. Symmetrical light distribution. Luminaire made of extruded
aluminium alloy (grade 6063),
pressure die-cast aluminium alloy of high corrosion resistance and non-corrosive
stainless-steel fasteners. Reflector system made of spun aluminium (powder coated
white). Clear polycarbonate diffuser. Pressure die cast aluminium mounting plate
Ø100.5mm x 4mm thick with 2 elongated holes 15 x 10 to suit M8 bolts at
PCD 55 for surface mounting on floor. Single cable entrance via PG7 cable gland.
Protection class IP65. Mechanical resistance IK10. Pure polyester powder coated
graphite grey /anthracite grey / jet black. Available colour temperature 2700K /
3000K /4000K / 5700K. Colour rendering index (CRI)>80. SDCM-3 MacAdam.
LED module with expected service life of at least 60,000 operating hours. Prewired
with LED driver and suitable for operating on 240V, 50Hz single phase ac supply.
Driver efficiency >80%, Power factor >0.95, THD <10%, Surge protection
2.5KV. Luminaire dimension :100mm diameter x 410mm height. CE & BIS
Certified. Inhouse NABL accredited lab. With warranty of 5years including freight
charges (Make: K-Lite or equivalent make approved by CPWD/KPWD/KSCADC)
25
-
-
OD20330/2024-2025
Supply of foundation Bolt, 4 Nos of bolt with 8 Nuts, 8 Plain Washer and 8 Spring
Washer for decorative bollard
65
-
-
OD20331/2024-2025
Supply and fixing of Bollard Input power: 9W LED Bollard luminaire designed for
surface mounted. Symmetrical light distribution. Luminaire made of extruded
aluminium alloy (grade 6063) with die-cast aluminium components of high corrosion resistance and non-corrosive
stainless-steel fasteners. Translucent polycarbonate diffuser. Pressure die cast
aluminium mounting plate 129mm x 124mm x 4mm thick with 3 elongated holes 15
x 10 to suit M8 bolts at PCD 70 with pure polyester powder coating. This mounting
plate along with foundation bolts of suitable size to be used for ensuring firm grouting
into the specially designed foundation. Protection class IP65. Mechanical resistance
IK08. Pure polyester powder coated graphite grey / anthracite grey / jet black.
Available colour temperature 2700K / 3000K / 4000K / 5700K. Colour rendering
index (CRI)>80. SDCM-3 MacAdam. K-Lite LED module with expected service
life of at least 60,000 operating hours. Prewired with LED driver and suitable for
operating on 240V, 50Hz single phase ac supply. Driver efficiency >80%, Power
factor >0.95, THD <10%, Surge protection 2.5KV. Luminaire dimension:
130mm triangle x 800mm height. CE & BIS Certified. Inhouse NABL
accredited lab. With 5 year warranty and freight charges (Make: K-Lite or equivalent
make approved by CPWD/KPWD/KSCADC)
40
-
-
OD20332/2024-2025
Supply and fixing of foundation Bolt, 4 Nos of M16 x 300mm bolt with 8 Nuts, 8
Plain Washer and 8 Spring Washer for mounting streetlight pole
94
-
-
OD20333/2024-2025
Supply and fixing of 30W LED pendant mounted compact pathway luminaire. Type
IV (Asymmetrical light distribution). Luminaire made of specially contoured spun
aluminium body of high corrosion resistance with extruded aluminium neck design
for unique and better aesthetics and non-corrosive stainless-steel fasteners. Convex
type clear acrylic diffuser. The mounting arrangement nipple, coupling & Hex
nut made of Stainless steel 304 suitable for mounting to internally threaded pipe of
designation M30. Protection class IP65. Mechanical resistance IK10. Pure polyester
powder coated graphite grey / anthracite grey / jet black. Available colour
temperature 2700K / 3000K / 4000K / 5700K, Colour rendering index (CRI)>70.
SDCM-3 MacAdam. LED module with expected service life of at least 72,000
operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz
single phase ac supply. Driver efficiency >85%, Power factor >0.95, THD
<10%, Surge protection 4KV. Luminaire dimension: 475mm diameter x 437mm
height. CE & BIS Certified. Inhouse NABL accredited lab. With 5 year
warranty. including freight (Make: K-Lite or equivalent make approved by
CPWD/KPWD/KSCADC)
80
-
-
OD20334/2024-2025
Supply and installation of Curvy Bishop Lighting Pole – 3.66m - SA ainted
with marine coated 3660mm Curvy Bishop pole made of circular mild steel pipe
(grade YST 210) 88.9mm Dia x 2.9mm thick with 2615mm Height. Decorative base
made of Gravity Die-cast aluminium (310mm Dia x 562mm Height). The single arm
curvy bracket is a split constructed type, Bracket stem made of
MS Pipe 76.1mm Dia x 2.6mm thick, emerging from a Gravity Die cast Aluminium
embellishment (220mm Dia x 195mm height) up to a height of 575mm crowned at
top with a cast Iron decorative finial of 260mm height. The artistically curved single
arm made of MS pipe 38.1mm Dia x 2mm thick, spruced up with MS Scroll with leaf decorative embellishment, is firmly held to the stem and other end facilitates the
fitment of pendant type luminaire at 600 mm from the vertical axis of the bracket
stem. Pole section welded by certified welders using high end MIG welding
processes.
GDC aluminium service door 185mm height x 80mm width shall be provided with
the company logo embossed on the bottom of the door and safety rope. The control
gear tray is prewired with 2.5 Sq.mm cable,6A MCB. Any other internal cables and
connections shall not be covered in the scope of supply. Mild steel mounting plate
200mm Square x 12mm thick Steel of grade E250 to IS 2062 : 2011 with 4 elongated
holes 38 x 19 to suit M16 x 300mm bolts of grade 4.6 at CC 140. The base plate has a
cable entry hole of 70mm dia at the center. This mounting steel plate along with
foundation bolts of suitable size to be used for ensuring firm grouting into the
specially designed foundation. All dimensions are within +/- 5% tolerance. After
fabrication entire pole is shot blasted (Inhouse).The pole is coated with zinc rich
primer & pure polyester powder coating or epoxy zinc phosphate primer and
finished using environmentally stable polyurethane-based paint (coating thickness 60-
80 microns). The Pole shall be provided with Graphite grey / Anthracite grey / Black
as standard colour options. including freight charge. Warranty of
80
-
-
OD17723/2024-2025 Supply and fixing of SYNTEC THREADED CABLE GLANDS IP 68 WITH
LAMELLAR TECHNOLOGY, Cable entry M 12 x 1.5, sealing range (mm dia) 2.5 -
6.5, Grey colour (Make Hensel RAL7035 1555.12.06 or equivalent make approved
by CPWD/KPWD/KSCADC)
450
-
-
OD17724/2024-2025
Supply and fixing of Cable Junction Boxes IP 66 with integrated membranes / metric
knockouts for cable entry. cable size (1.5-4) sqmm. Box dimension (130 x 130 x 77)
mm with terminals. (Make. Hensel DK 0604 G or equivalent make approved by
CPWD/KPWD/KSCADC)
137
-
-
90.6.6.3
Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core
copper conductor flat cable for submersible pump motor conforming to IS 694 part I
1990 as required including giving necessary connections of the following sizes.4 sq
mm
2000
-
-
90.12.1.40
Supply & laying of one number PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1KV grade of the following sizes in ground including
excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but
excluding sand cushioning and protective covering (in ordinary soil).4 core 10 sq mm
1600
-
-
90.12.24.2
Supply of superior quality copper tubular cable socket and making core termination
of cables of the following sizes including crimping etc. as required.4 sq mm
762
-
-
1.27.6
Supplying and fixing following size/ modules, GI box alongwith modular base &
cover plate for modular switches in recess etc as required.12 Module
(200mmX150mm)
2
-
-
OD20337/2024-2025 Supply and installation of 3, 15HP, 415V Horizontal type open Well Submersible
Pump set suitable for saltwater pumping in stainless steel body, outlet size of 55mm
(Make: Lubi, Kirloskar or equivalent make approved by CPWD/KPWD/KSCADC)
1
-
-
90.14.28.5
S & F Motor starters of the following ratingsSemiautomatic star delta starter for
15 to 20HP motor
1
-
-
90.6.6.4
Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core
copper conductor flat cable for submersible pump motor conforming to IS 694 part I
1990 as required including giving necessary connections of the following sizes.6 sq
mm
160
-
-
90.12.24.3
Supply of superior quality copper tubular cable socket and making core termination
of cables of the following sizes including crimping etc. as required.6 Sq mm
6
-
-
OD20338/2024-2025
Supply of premium quality range of Electrical Rubber Hand Gloves (Left and Right
Hand) (1100V) that is suitable to be used by electricians and supervisors for
protection against electrical shocks in various places like hospitals, amusement parks,
water plants, office buildings, manufacturing plants and schools. Made with high
quality rubber. Having excellent grip, water resistance, high strength, lightweight and
high durability. (Make: - RPES or equivalent make approved by
CPWD/KPWD/KSCADC)
1
-
-
OD20339/2024-2025
Supply of Nylon Yellow Borewell Submersible Danile Rope for hanging the
submersible pump in an open/bore well. Made by Nylon braided cotton material helps
it to remain extra strong at the same time being rust free. High strength and shock
resistant to abrasion and deterioration UV light resistant Unaffected by hard water
Minimal elongation - 20mm (Approved make by CPWD/KPWD/KSCADC)
50
-
-
OD20340/2024-2025
Supply and fixing of waterproof submersible tape 1inch X 1feet.
5
-
-
OD20341/2024-2025
Supply and installation of 6" Submersible saltwater borewell pump. Pump and
motor MOC - SS, 3Phase, 3stage, 7.5HP, 2900rpm, 3" outlet. Including DOL
starter with VM, AM and SPP (Make: Lubi SLSW 60/3stage or equivalent make
approved by CPWD/KPWD/KSCADC)
1
-
-
5.9
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip
earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer
etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt
& spring washer spaced at 50mm)
300
-
-
5.15
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections
etc. as required.
100
-
-
OD20475/2024-2025
Supply and fixing of Vintage cord ideal for filament lamp, Premium vintage-style
finish, Adjustable 1.5-meter cord, Fits perfectly into any space, colour - rose gold.
including 1*20W filament decorative bulb. (Make Philips or equivalent make
approved by CPWD/KPWD/KSCADC)
5
-
-
Civil works for yard lighting in hatchery
-
-
-
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means
in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift up to 1.5 m, including
getting out the excavated soil and disposal of surplus excavated soil as directed,
within a lead of 50 m.All kinds of soil
61.66
-
-
4.1.8
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4
coarse sand : 8 graded stone aggregate 40 nominal size)
11.58
-
-
4.3.1 Centering and shuttering including strutting, propping etc. and removal of form work
for:Foundations, footings, bases for columns
325.8
-
-
5.1.2
Providing and laying in position specified grade of reinforced cement concrete,
excluding the cost of centering, shuttering, finishing and reinforcement - All work up
to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm
nominal size
40.73
-
-
5.22.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete upto plinth levelThermo - Mechanically Treated
bars of grade Fe-500D or more
3258
-
-
10.1
Structural steel work in single section, fixed with or without connecting plate,
including cutting, hoisting, fixing in position and applying a priming coat of approved
steel primer all complete.
284.17
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements