Kerala State Coastal Area Development Corporation Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 1,00,000Document Cost
₹ 8,850Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_SCADC_692380_1Bid Award Id
ViewTender No
ET-31/2024-25Tender Authority
Kerala State Coastal Area Development Corporation Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means
in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting
out the excavated soil and disposal of surplus excavated soil as directed, within a lead
of 50 m.All kinds of soil
611.6
-
-
4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost
of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse
sand : 8 graded stone aggregate 40 nominal size)
23.92
-
-
7.1.1 Random rubble masonry with hard stone in foundation and plinth including levelling
up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate
20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse
sand)
209.45
-
-
50.6.1.4 Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm
or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth
with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
4.41
-
-
5.1.2 Providing and laying in position specified grade of reinforced cement concrete,
excluding the cost of centering, shuttering, finishing and reinforcement - All work up
to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm
nominal size
6
-
-
4.2.3 Providing and laying cement concrete in retaining walls, return walls, walls ( any
thickness) including attached pilasters, columns, piers, abutments, pillars, posts,
struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks,
plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost
of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size)
264.75
-
-
5.9.1 Centering and shuttering including strutting, etc. and removal of form for:Foundations,
footings, bases of columns, etc for mass concrete
20
-
-
4.3.2 Centering and shuttering including strutting, propping etc. and removal of form work
for:Retaining walls, return walls, (any thickness) including attached pilasters,
buttresses, plinth and string courses fillets, kerbs and steps etc.
1032.56
-
-
5.22.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete upto plinth levelThermo - Mechanically Treated
bars of grade Fe-500D or more
27074.8
-
-
50.6.7.2 Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size
in cement mortar 1:6 for super structure above plinth level up to floor two level
including all cost of materials, labour charges etc.
18
-
-
13.1.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
623.07
-
-
13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two
or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior
primer applied @ 2.20 kg/10 sqm)
623.07
-
-
16.1 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne
capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and
consolidating with road roller including making good the undulations etc. and rerolling the sub grade and disposal of surplus earth with lead upto 50 metres.
275
-
-
Construction of Auditorium
-
-
-
2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means
in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting
out the excavated soil and disposal of surplus excavated soil as directed, within a lead
of 50 m.All kinds of soil
454.09
-
-
4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost
of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse
sand : 8 graded stone aggregate 40 nominal size)
107.94
-
-
7.1.1 Random rubble masonry with hard stone in foundation and plinth including levelling
up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate
20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse
sand)
23.51
-
-
5.1.2 Providing and laying in position specified grade of reinforced cement concrete,
excluding the cost of centering, shuttering, finishing and reinforcement - All work up
to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm
nominal size
131.26
-
-
5.9.1 Centering and shuttering including strutting, etc. and removal of form for:Foundations,
footings, bases of columns, etc for mass concrete
326.91
-
-
5.2.2 Reinforced cement concrete work in walls (any thickness), including attached
pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,
abutments, posts and struts etc. up tot floor five level excluding cost of centering,
shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded
stone aggregate 20 mm nominal size)
24.53
-
-
5.9.6 Centering and shuttering including strutting, etc. and removal of form for:Columns,
Pillars, Piers, Abutments, Posts and Struts
317.68
-
-
5.3 Reinforced cement concrete work in beams, suspended floors, roofs, having slope up
to 15sup0/sup landings, balconies, shelves, chajjas, lintels, bands, plain window
sills, staircases and spiral stair cases up to floor five level excluding the cost of
centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse
sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
50.18
-
-
5.9.5 Centering and shuttering including strutting, etc. and removal of form for:Lintels,
beams, plinth beams, girders bressumers and cantilevers
276.8
-
-
5.9.3 Centering and shuttering including strutting, etc. and removal of form for:Suspended
floors, roofs, landings, balconies and access platform
201.67
-
-
5.9.7 Centering and shuttering including strutting, etc. and removal of form for:Stairs,
(excluding landings ) except spiral - staircases)
18.84
-
-
5.22.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete upto plinth levelThermo - Mechanically Treated
bars of grade Fe-500D or more
16040.67
-
-
5.22A.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete above plinth level.Thermo - Mechanically Treated
bars of grade Fe-500D or more
12165.4
-
-
2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
245.33
-
-
50.6.7.2 Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size
in cement mortar 1:6 for super structure above plinth level up to floor two level
including all cost of materials, labour charges etc.
115.52
-
-
50.6.3.2 Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm
or nearest available size confirming to IS 2185 part I of 1979 for super structure up to
floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including
cost of scaffolding complete
16.25
-
-
10.1 Structural steel work in single section, fixed with or without connecting plate,
including cutting, hoisting, fixing in position and applying a priming coat of approved
steel primer all complete.
21938.5
-
-
10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed
work, including cutting, hoisting, fixing in position and applying a priming coat of
approved steel primer all complete.
30847.87
-
-
12.48 Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness and of approved size and as per approved pattern on steel frame work
complete (steel frame work to be paid separately)
979.8
-
-
12.49 Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness
and of approved pattern on steel frame work complete (steel frame work to be paid
separately ).
117.5
-
-
13.1.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
885.1
-
-
8.12 Providing and laying flamed finish Granite stone flooring in required design and
patterns, in linear as well as curvillinear portions of the building all complete as per
the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick
base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement
slurry and pointing with white cement slurry admixed with pigment of matching shade
including rubbing, curing and polishing etc. all complete as specified and as directed
by the Engineer-in-charge. a. Flamed finish granite stone slab Jet Black, Cherry Red,
Elite Brown, Cat Eye or equivalent.
604.4
-
-
11.40 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more
(thickness to be specified by the manufacturer) of Ist quality conforming to IS: 15622
of approved make in all colours, shades, except white, Ivory, Grey Fume Red Brown,
laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing
the joints with white cement and matching pigments etc., complete.
23.63
-
-
11.36 Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622
(thickness to be specified by the manufacturer), of approved make, in all colours,
shades except burgundy, bottle green, black of any size as approved by Engineer -inCharge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar
1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm,
including pointing in white cement mixed with pigment of matching shade complete.
91.52
-
-
50.9.1.3 Providing wood work in frames of doors, windows, clerestory windows and other
frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners
of required dia & length ( hold fast lugs or dash fastener shall be paid for
separately). using good quality Vengai wood
0.71
-
-
50.9.3.3 Providing and fixing paneled or paneled and glazed shutters for doors, windows and
clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt
hinges bright finished of required size with necessary screws, excluding paneling
which will be paid for separately, all complete as per direction of Engineer-in -charge.
using vengai wood
27.28
-
-
50.9.4.3 Providing and fixing paneling or paneling and glazing in paneled or paneled and
glazed shutters for doors, windows and clerestory windows ( Area of opening for
panel inserts excluding portion inside grooves or rebates to be measured). Paneling for
paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality
Vengai wood
27.28
-
-
9.53 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10
mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block
30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size)
68
-
-
9.74.1 Providing and fixing bright finished brass tower bolts (barrel type) with necessary
screws etc. complete:250x10 mm
20
-
-
9.100.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not
less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or
shade, with necessary screws etc. complete:125 mm
12
-
-
9.48.1 Providing and fixing M.S. Grills of required pattern in frames of windows etc. with
M.S. flats, square or round bars etc. including priming coat with approved steel primer
all complete.Fixed to steel windows by welding
609.75
-
-
13.48.3 Finishing with Deluxe Multi surface paint system for interiors and exteriors using
primer as per manufacturers specifications:Painting Steel work with Deluxe Multi
Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over
an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture
20.79
-
-
13.52.1 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as
per manufacturer's specifications including appropriate priming coat, preparation
of surface, etc. complete.On steel work
2055.17
-
-
13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two
or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior
primer applied @ 2.20 kg/10 sqm)
1798.74
-
-
13.43.1 Applying one coat of water thinnable cement primer of approved brand and
manufacture on wall surface:Water thinnable cement primer
137.01
-
-
13.60.1 Wall painting with acrylic emulsion paint of approved brand and manufacture to give
an even shade:Two or more coats on new work
137.01
-
-
13.62.1 Painting with synthetic enamel paint of approved brand and manufacture of required
colour to give an even shade:Two or more coats on new work over an under coat of
suitable shade with ordinary paint of approved brand and manufacture .
83.66
-
-
10.28 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes,
channels, plates etc., including welding, grinding, buffing, polishing and making
curvature (wherever required) and fitting the same with necessary stainless steel nuts
and bolts complete, i/c fixing the railing with necessary accessories & stainless
steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or
the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,
(for payment purpose only weight of stainless steel members shall be considered
excluding fixing accessories such as nuts, bolts, fasteners etc.)
106.62
-
-
9.147.5 Providing and fixing factory made uPVC white colour casement/casement cum
fixed glazed windows comprising of uPVC multi-chambered frame, sash and
mullion (where ever required) extruded profiles duly reinforced with 1.60 +/-
0.2
mm thick galvanized mild steel section made from roll forming process of required
length (shape & size according to uPVC profile), uPVC extruded glazing beads of
appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction
hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8
mm size for fixing frame to finished wall, plastic packers, plastic caps and
necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut
and fusion welded at all corners, mullion (if required) shall be also fusion welded
including drilling of holes for fixing hardware's and drainage of water etc. After
fixing frame the gap between frame and adjacent finished wall shall be filled with
weather proof silicon sealant over backer rod of required size and of approved
quality, all complete as per approved drawing & direction of Engineer-in-Charge.
(Single / double glass panes and silicon sealant shall be paid separately)
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance
in dimension i.e. in depth & width of profile shall be acceptable.Casement window
double panels with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series)frame
67 x 60 mm & sash / mullion 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm
and single glazing bead/ double glazing bead of appropriate dimension. (Area of
window above 1.50 sqm).
23.04
-
-
9.117.1 Providing and fixing factory made uPVC door frame made of uPVC extruded sections
having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0mm
(±0.2 mm), corners of the door frame to be jointed with galvanized brackets and
stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the
frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1 mm (± 0.1 mm)
wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per
manufacturer's specification and direction of Engineer-in-chargeExtruded section
profile size 48x40 mm
42.8
-
-
21.3.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the
architectural drawings and the directions of Engineer - in -Charge. ( Cost of
aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm
thickness
20.79
-
-
9.118.2 Providing and fixing to existing door frames30 mm thick factory made Polyvinyl
Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size
60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding
edging on one side. The styles and rails mitred and joint at the corners by means of
M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and
stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S.
tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of
'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall
thickness fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The
shutter frame filled with a uPVC multi-chambered single panel of size not less than
620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness.
The panels filled vertically and tie bar at two places by inserting horizontally 6 mm
galvanised M.S. rod and fastened with nuts and washers, complete as per
manufacturer's specification and direction of Engineer-in-charge.
13.2
-
-
50.17.1.4 Supplying and fixing CP Health faucet good quality including cost of materials and
labour charges etc. complete as per the direction of site engineer-in-charge.
7
-
-
50.18.7.3.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm
dia 10Kgf/ cm2- Internal work- Exposed on wall
50
-
-
50.18.7.4.1 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm
dia 10Kgf/cm2- Internal work - Exposed on wall
50
-
-
50.18.9.7.1 Providing and fixing PVC pipes includings of pipes with one step PVC solvent
cement, trenching refilling & testing of joints complete as per direction of Engineer in
Charge. 63 mm dia 6Kgf/cm2
50
-
-
50.18.9.8.1 Providing and fixing PVC pipes includings jointing of pipes with one step PVC
solvent cement, trenching, refilling & testing of joints complete as per direction of
Engineer in Charge. 75 mm dia 6 Kgf/ cm2
50
-
-
50.18.9.9.1 Providing and fixing PVC pipes includings jointing of pipes with one step PVC
solvent cement, trenching, refilling & testing of Joints complete as per direction of
engineer in charge.110 mm dia 6Kgf/cm2
50
-
-
50.18.8.3.1 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work, including cutting chases and making good the wall etc. 25 mm pipe
12 kgf/cm2
25
-
-
50.18.8.4.1 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work, including cutting chases and making good the wall etc. 32 mm pipe
10Kgf/cm2
25
-
-
50.18.8.6.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6
kgf/cm2
30
-
-
50.18.8.7.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes with one step PVC solvent cement and
testing of joints complete as per direction of Engineer-in-Charge. Concealed work,
including cutting chases and making good the wall etc 63 mm pipe 4 kgf/ cm2
30
-
-
50.18.8.9.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes with one step PVC Solvent cement and
testing of joints complete as per direction of Engineer-in-Charge. Concealed work,
including cutting chases and making good the wall etc. 110 mm pipe 4 kgf/cm2
30
-
-
50.18.9.3.1 Providing and fixing PVC pipes includings jointing of pipes with one step PVC
solvent cement, trenching, refilling & testing of joints complete as per direction
of Engineer in Charge 25 mm dia 12Kfg/cm2
50
-
-
50.18.9.4.1 Providing and fixing PVC pipes includings jointing of pipes with one step PVC
solvent cement, trenching, refilling & testing of joints complete as per direction
of Engineer in Charge.32 mm dia 10.Kgf/cm2
30
-
-
50.18.9.6.2 Providing and fixing PVC pipes includings jointing of pipes with one step PVC
solvent cement, trenching, refilling & testing of joints complete as per direction
of Engineer in Charge. 50 mm dia 6 Kgf/cm2
50
-
-
50.18.9.7.2 Providing and fixing PVC pipes includings jointing of pipes with one step PVC
solvent cement, trenching, refilling & testing of joints complete as per direction
of Engineer in Charge.63 mm dia 4 Kgf/cm2
50
-
-
50.18.9.9.2 Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent
cement, trenching, refilling & testing of joints complete as per direction of
Engineer in CHarge. 110 mm dia 4 Kg/cm2
50
-
-
50.18.9.22.8 Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes,
including jointing with PVC solvent cement -110 mm dia Vent cowl
10
-
-
50.18.9.20.1 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 63 mm dia Elbow
5
-
-
50.18.9.20.2 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement -63 dia 45 degree Elbow
5
-
-
50.18.9.20.4 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 63 mm dia Bend
10
-
-
50.18.9.20.5 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes including
jointing with PVC solvent cement - 63x63x63 mm dia Tee
5
-
-
50.18.9.20.10 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including
jointing with PVC solvent cement - 63x50 mm dia Reducer
3
-
-
50.18.9.21 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including
jointing with PVC solvent cement - 75 mm dia Elbow
5
-
-
50.18.9.21.2 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including
jointing with PVC solvent cement -75 mm dia 45 degree Elbow
5
-
-
50.18.9.21.3 Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes,
including jointing with PVC solvent cement -75 mm dia Door Elbow
3
-
-
50.18.9.21.4 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 75 mm dia Bend
5
-
-
50.18.9.21..5 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement -75x75x75 mm dia Tee
5
-
-
50.18.9.22.1 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 110 mm dia Elbow
10
-
-
50.18.9.22.2 Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow
5
-
-
50.18.9.22.4 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement- 110 mm dia Bend
5
-
-
50.18.9.22.5 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including
jointing with PVC solvent cement 110x110x110 mm dia Tee
5
-
-
50.18.9.22.6 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door tee
3
-
-
OD25091/2024-2025 Providing and fixing ball valve (PVC) of approved quality, High or low pressure, with
plastic floats complete:100 mm nominal bore
5
-
-
OD25097/2024-2025 Providing and fixing ball valve (PVC) of approved quality, High or low pressure, with
plastic floats complete: 75 mm nominal bore
5
-
-
OD25098/2024-2025 Providing and fixing ball valve (PVC) of approved quality, High or low pressure, with
plastic floats complete:25 mm nominal bore
5
-
-
18.22.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:150 mm diameter
7
-
-
18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank
:ISI 12701 marked, with cover and suitable locking arrangement and making
necessary holes for inlet, outlet and overflow pipes but without fittings and the base
support for tank.
5000
-
-
18.51.1 Providing and fixing C.P. brass long body bib cock of approved quality conforming to
IS standards and weighing not less than 690 gms.15 mm nominal bore
4
-
-
18.52.1 Providing and fixing C.P brass stop cock ( concealed) of standard design and of
approved make conforming to IS: 893115 mm nominal bore
15
-
-
18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of
approved quality conforming to IS: 893115 mm nominal bore
4
-
-
18.65 Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102
mm, height of 75 mm with concealed fittings arrangements, weighing not less than
106 gms.
2
-
-
17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type
W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including
flush pipe, with manually controlled device (handle lever), conforming to IS : 7231,
with all fittings and fixtures complete, including cutting and making good the walls
and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid
5
-
-
17.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm
Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including
flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all
fittings and fixtures complete, including cutting and making good the walls and floors
wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm
with integral type foot rests
2
-
-
17.7.2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32
mm C.P. brass waste of standard pattern, including painting of fittings and brackets,
cutting and making good the walls wherever require:White Vitreous China Wash basin
size 630 x 450 mm with a single 15 mm C.P. brass pillar tap
7
-
-
17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved
quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P.
brass screws and washers complete.
4
-
-
19.4.3.1 Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I.
grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm
size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less
than 2.70 kg as per standard design:
180x150 mm size P typeWith common burnt clay F.P.S (non modular) bricks of class
designation 7.5
7
-
-
19.7.1.1 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand)
with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20
mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement
mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and
making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete
as per standard design:
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty)
455x610 mm internal dimensions, total weight of cover and frame to be not less than
38 kg (weigh of cover 23 kg and weight of frame 15 kg):With common burnt clay
F.P.S. (non modular) bricks of class designation 7.5
1
-
-
19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb
shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per
standard design.With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
1
-
-
51.19.ST4 Supplying and installing ready made PVC Septic tank including the cost of carriage,
trenching, placing at the level below ground level as specified as per the direction of
engineer in charge (Provision for CC/RCC/Sand/06mm aggregate for the preparation
of bed shall be paid separately) 4. 35 to 50 flush capacity
2
-
-
16.91.2 Providing and laying factory made chamfered edge Cement Concrete paver blocks
in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,
thickness & size/ shape, made by table vibratory method using PU mould, laid in
required colour & pattern over 50mm thick compacted bed of sand, compacting
and
proper embedding/laying of inter locking paver blocks into the sand bedding layer
through vibratory compaction by using plate vibrator, filling the joints with sand and
cutting of paver blocks as per required size and pattern, finishing and sweeping
extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C.
paver block of M-30 grade with approved color design and pattern.
640
-
-
12.52.3 Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in
true horizontal level, suspended on inter locking metal grid of hot dipped galvanized
steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of
main "T" runner with suitably spaced joints to get required length and of
size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center
to center and cross "T" of size 24x25 mm made of 0.30 mm thick
(minimum) sheet, 1200 mm long spaced between main "T" at 600 mm
center to center to form a grid of 1200x600 mm and secondary cross "T"
of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be
interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and
wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in
the grid including, required cutting/making, opening for services like diffusers, grills,
light fittings, fixtures, smoke detectors etc. Main "T" runners to be
suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to
ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with
galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to
center along main T, bottom exposed width of 24 mm of all T-sections shall be prepainted with polyester paint, all complete for all heights as per specifications,
drawings and as directed by Engineer -in-charge.12.5 mm thick square edge PVC
Laminated Gypsum Tile size 595x595 mm made of Gypsum plasterboard ,
manufactured from natural gypsum as per IS 2095 part I and laminated with white
0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized
polyster on the back side with all edges sealed with the face side PVC film which goes
around and wraps the edges and is bonded to the edges and the back side metalized
polyster film so as to make the tile a completely sealed unit.
676.5
-
-
26.46 Providing and fixing in position, 200 mm thick factory made Expanded Polystyrene
Core (EPS Core) wall panels consisting of EPS core sandwiched between two
Engineered sheets of welded wire fabric mesh duly finished with shortcrete materials
on outer faces. The fabric mesh shall be made of 3 mm dia G.I. wire mesh with 50 mm
pitch in both the directions and on both faces of the wall, kept at 120-135 mm gap and
connected by the zig zag G.I. wire of 3 mm dia at alternate row by welding (at an
angle ranging from 50-70 degree) . The EPS core shall consist of 100 mm thick EPS of
density not less than 20 kg/ per cum. Both the outer faces of the panel shall be finished
by applying the layer of 50 mm thick cement mortar 1:3 {1 cement: 3 coarse sand (not
having more than 40% stone chips of size upto 6 mm)} À with the help of
shotcreting/guniting equipment etc at a pressure not less than 1 bar (100Kn/m2) and
both surfaces finished with trowel. Fixing operations of wall panels shall be completed
in all respect as per drawings and specifications and under the overall direction of the
Engineer-in-charge.
446.18
-
-
Bore well
-
-
-
23.2.2.3 Boring /drilling bore well of required dia for casing / strainer pipe, by suitable method
prescribed in IS: 2800 ( part I), including collecting samples from different strata,
preparing and submitting strata chart/ bore, including hire & running charges of
all equipments, tools, plants & machineries required for the job, all complete as
per direction of Engineer- in- charge, beyond 90 metre & upto 150 metre depth
below ground level.
Rocky strata including Boulders400 mm dia
100
-
-
23.3.3 Supplying, assembling, lowering and fixing in vertical position in bore well,
unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS :
12818, including required hire and labour charges, fittings & accessories etc. all
complete, for all depths, as per direction of Engineer- in- Charge.200 mm nominal size
dia
100
-
-
ELECTRIFICATION Wiring
-
-
-
1.10.1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm
FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC
conduit,
with modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FRLS
PVC insulated copper conductor single core cable etc as required.Group A
40
-
-
1.10.2 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm
FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC
conduit,
with modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FRLS
PVC insulated copper conductor single core cable etc as required.Group B
16
-
-
1.10.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm
FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC
conduit,
with modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FRLS
PVC insulated copper conductor single core cable etc as required.Group C
64
-
-
1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper
conductor single core cable in surface / recessed medium class PVC conduit, 2 way
modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
2
-
-
1.21.1 Supplying and fixing of following sizes of medium class PVC conduit along with
accessories in surface/ recess including cutting the wall and making good the same in
case of recessed conduit as required.20 mm
2500
-
-
1.21.2 Supplying and fixing of following sizes of medium class PVC conduit along with
accessories in surface/ recess including cutting the wall and making good the same in
case of recessed conduit as required.25 mm
800
-
-
1.21.3 Supplying and fixing of following sizes of medium class PVC conduit along with
accessories in surface/ recess including cutting the wall and making good the same in
case of recessed conduit as required.32 mm
100
-
-
1.24.1 Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as
required.5/6 amps switch
25
-
-
1.24.2 Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as
required.2 way 5/6 amps switch
2
-
-
1.24.3 Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as
required.15/16 amp switch
24
-
-
1.24.4 Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as
required.3 pin 5/6 amp socket outlet
25
-
-
1.24.5 Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as
required.6 pin 15/16 amp socket outlet
10
-
-
90.10.3.15 Supply and Fixing the following modular switches & accessories in the existing
front plates and giving necessary connections as required (RoHS compliant )32A DP
switch with indicator
20
-
-
90.10.3.33 Supply and Fixing the following modular switches & accessories in the existing
front plates and giving necessary connections as required (RoHS compliant )25A 3pin
Shuttered socket
20
-
-
90.10.3.32 Supply and Fixing the following modular switches & accessories in the existing
front plates and giving necessary connections as required (RoHS compliant )25A 3
pin plug top with indicator
20
-
-
1.24.6 Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as
required.Telephone socket outlet
2
-
-
1.24.7 Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as
required.TV antenna socket outlet
6
-
-
1.26 Supplying and fixing modular blanking plate on the existing modular plate &
switch box excluding modular plate as required.
30
-
-
1.27.1 Supplying and fixing following size/ modules, GI box alongwith modular base &
cover plate for modular switches in recess etc as required.1 or 2 Module
(75mmX75mm)
76
-
-
1.27.2 Supplying and fixing following size/ modules, GI box alongwith modular base &
cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)
6
-
-
1.27.4 Supplying and fixing following size/ modules, GI box alongwith modular base &
cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)
2
-
-
1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on
surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket
outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).
20
-
-
1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on
surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps
modular socket outlet and 15/16 amps modular switch, connection etc. as required.
3
-
-
1.33 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden
block including connection etc as required.
43
-
-
1.53.1 Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing
surface/recessed steel/PVC conduit as required1 run of Cable
180
-
-
1.53.2 Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing
surface/recessed steel/PVC conduit as required2 run of Cable
200
-
-
1.55.1 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell
point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper
conductor single core cable in surface/ recessed PVC conduit, and earthing the point
with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as
required.Group A
105
-
-
1.56 Supplying and fixing suitable size Gl box with modular plate and cover in front on
surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket
outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light
plugs to be used in non residential buildings).
35
-
-
1.57 Supplying & fixing suitable size Gl box wih modular plate and cover in front on
surface or in recess including providing and fixing 25 A modular socket outlet and 25
A modular SP MCB, "C" curve including connections, painting etc. as
required. lCD
2
-
-
1.58 Supplying and fixing PVC batten/ angle holder including connection etc. as required.
7
-
-
90.3.14 Conveyance, installation, testing and commissioning of foot light fittings / skirt light
of all types directly on wall including cutting necessary holes, giving connections
with the extended orginal wiring, making good the damgaes, colour washing etc as
required.
3
-
-
90.4.1 Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per
IS 732 as required.
2
-
-
90.4.2 Supply and installation of suitable size MS belt type fan clamp fabricated from flat
iron 40 x 6 mm, 150mm long x 2 Nos with M.S. rod bent to shape, neatly painted
with 2 coats of enamel paint over a coat of red oxide primer as per IS 732 as required.
21
-
-
1.17.3 Supplying and drawing following sizes of FRLS PVC insulated copper conductor,
single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X
1.5 sq.mm
300
-
-
1.17.12 Supplying and drawing following sizes of FRLS PVC insulated copper conductor,
single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x
2.5 sq. mm
1000
-
-
1.17.21 Supplying and drawing following sizes of FRLS PVC insulated copper conductor,
single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x
4 sq. mm
2000
-
-
1.48 Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia,
heavy gauge including painting etc. as required. (Note : More than 5 cm length shall
be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
12
-
-
MCB, DB and RCCB
-
-
-
2.10.1 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve,
miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as
required.Single pole
84
-
-
2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete
etc. as required.
30
-
-
2.13.1 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing
MCB DB complete with connections, testing and commissioning etc. as required.40
amps
8
-
-
2.13.2 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing
MCB DB complete with connections, testing and commissioning etc. as required.63
amps
7
-
-
2.15.2 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts,
residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in
the existing MCB DB complete with connections, testing and commissioning etc. as
required.40 amps
4
-
-
2.15.3 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts,
residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in
the existing MCB DB complete with connections, testing and commissioning etc. as
required.63 amps
2
-
-
2.16 Supplying and fixing DP sheet steel enclosure on surface/ recess along with
25/32amps 240 volts "C" curve DP MCB complete with connections,
testing and commissioning etc. as required.
1
-
-
2.18 Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2
pole and earth,metal enclosed plug top along with 20 amps "C" curve, SP,
MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for
the socket out let and complete with connections, testing and commissioning etc. as
required.
1
-
-
90.11.1.11 Supply and installation of sheet steel, phosphatised and painted, dust and vermin
proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus
and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable
anchor bolts or fixed in recess including cutting hole on the wall , making good the
damages, colour washing etc. as required6 way (8+18) - three phase double cover (IP
42/43)
5
-
-
90.11.1.14 Supply and installation of sheet steel, phosphatised and painted, dust and vermin
proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus
and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable
anchor bolts or fixed in recess including cutting hole on the wall , making good the
damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical
DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/
TP MCB as outgoing (IP 42/43)
1
-
-
OD24930/2024-2025 Supply and fixing 200A to 600A HRC capsule type fuse in the existing HRC fuse
base.
3
-
-
OD24932/2024-2025 Supply installation and commissioning of 250A HRC Fuse holder of Nonhygroscopic Bakelite material base fuse holder.
3
-
-
OD24934/2024-2025 Supply, Installation, testing and commissioning of 40 A to 63 A, MCB (C
curve), 10 kA breaking capacity Three pole/four pole with reputed brands.
3
-
-
2.2.6 Providing and fixing following rating and breaking capacity and pole MCCB in
existing cubicle panel board including drilling holes in cubicle panel, making
connections, etc. as required.250 Amp, 25 KA,TPMCCB
3
-
-
OD24987/2024-2025 Supply, Installing 200A to 400A 2 way neutral connector bar in the existing panel
board
3
-
-
90.14.10.9 Supply, conveyance and fixing the following types & current rated control gears
& switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in
the existing panel assembly as required.250A, 35/36 kA (Ics=100%Icu), 3 pole,
current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC
3
-
-
90.14.11.17 MCCB AccessoriesSupply and fixing kastel interlock kit up to 250A.
2
-
-
Earthing
-
-
-
5.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including
accessories, and providing masonry enclosure with cover plate having locking
arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as
required.
6
-
-
5.14 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for
connections etc. as required.
49
-
-
90.16.1.3 Supply and drawing bare earthing conductors of the following sizes along with
wiring/ cables and giving connection as required3.15 mm copper conductor ( 10
SWG)
350
-
-
90.16.1.5 Supply and drawing bare earthing conductors of the following sizes along with
wiring/ cables and giving connection as required4.75 mm copper conductor (6 SWG)
30
-
-
90.16.1.6 Supply and drawing bare earthing conductors of the following sizes along with
wiring/ cables and giving connection as required6.00 mm copper conductor (4 SWG)
30
-
-
90.16.1.53 Supply of superior quality copper earth socket for the following size of earth
conductor including crimping etc. as required.3.15 mm (10 SWG)
100
-
-
90.16.5.5 Supply of superior quality copper earth socket for the following size of earth
conductor including crimping etc. as required.4.75 mm (6 SWG)
10
-
-
90.16.5.6 Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.6. mm ( 4 SWG)
10
-
-
Cable and Termination
-
-
-
90.12.5.2 Supply & laying of one number PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/
HUME / STONE WARE/ GI/ DWC pipe as required.2 core 6 sq mm
35
-
-
90.12.5.33 Supply & laying of one number PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/
HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 150 sq mm
60
-
-
90.12.6.2 Supply & laying of one No. PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1 KV grade of the following sizes in the existing
masonry open duct as required.2 core 6 sq mm
10
-
-
90.12.6.33 Supply & laying of one No. PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1 KV grade of the following sizes in the existing
masonry open duct as required.3.5 core 150 sq mm
20
-
-
90.12.6.40 Supply & laying of one No. PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1 KV grade of the following sizes in the existing
masonry open duct as required.4 core 10 sq mm
10
-
-
90.12.6.41 Supply & laying of one No. PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1 KV grade of the following sizes in the existing
masonry open duct as required.4 core 16 sq mm
20
-
-
90.12.6.42 Supply & laying of one No. PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1 KV grade of the following sizes in the existing
masonry open duct as required.4 core 25 sq mm
24
-
-
90.12.6.43 Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing
masonry open duct as required.4 core 35 sq mm
30
-
-
90.12.7.2 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.2 core 6 sq mm with factory made clamp
10
-
-
90.12.7.33 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.3.5 core 150 sq mm
40
-
-
90.12.7.40 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp
26
-
-
90.12.7.41Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp
50
-
-
90.12.7.42 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.4 core 25 sq mm with factory made clamp
56
-
-
90.12.7.43 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.4 core 35 sq mm with factory made clamp
60
-
-
90.12.10.2 Supply & laying of DWC pipe in ordinary soil 0.75m below ground level
including excavation50/38 mm or nearest size
30
-
-
90.12.10.4 Supply & laying of DWC pipe in ordinary soil 0.75m below ground level
including excavation77/63 mm or nearest size
64
-
-
9.1.1 Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.2 X 6 sq. mm (19mm)
4
-
-
9.1.26 Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.3 1/2 X 150 sq. mm (50mm)
4
-
-
9.1.32 Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.4 X 10 sq. mm (25mm)
4
-
-
9.1.33 Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.4 X 16 sq. mm (28mm)
4
-
-
9.1.34 Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.4 X 25 sq. mm (28mm)
4
-
-
9.1.35 Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV grade as required.4 X 35 sq. mm (32mm)
4
-
-
OD24977/2024-2025 Supply and installation of 25 sqmm to 95 sqmm. 60 mm long x 12 mm wide x 1 mm
thick Copper earthing clips (or approximate size) for single compression glands and
giving all connections.
8
-
-
OD24979/2024-2025 Supply and installation of 4 sqmm to 16 sqmm. 60 mm long x 12 mm wide x 1 mm
thick Copper earthing clips (or approximate size) for single compression glands and
giving all
connections.
10
-
-
Fittings
-
-
-
OD24659/2024-2025 Supply Installation testing and commissioning of recessed mounted LED dimmable
down light completed with standard accessories. with 17 W maximum power, 1200
lumen, CCT 3000 K to 6500 k, CRI>80, power factor .9, UGR <19, 60 degree
beam angle, Life time burn hours as per L70 and >50000, Ripple factor <5%,
Surge protection 4KV, of modal NO: Philips DN590B M LED15S-4000 PSD WH
WB.
10
-
-
OD24660/2024-2025 Supply Installation testing and commissioning of recessed indirect DALI dimmable
LED Type -2, 2500 lumens, 30 W maximum power, 4000k CCT, CRI >80, power
factor .95, UGR <19, 50K Burning Hours as per L70B50 criteria, Must be BIS
certified with LM79 and LM80 reports, of modal NO: PHILIPS RC740B LED
36S/840 PSD WH.
48
-
-
OD24661/2024-2025 Supply Installation testing and commissioning of recessed indirect DALI dimmable
LED Type -1, 3600 lumens, 45 W maximum power, 4000k CCT, CRI >80, power
factor .95, UGR <19, 50K Burning Hours as per L70B50 criteria, Must be BIS
certified with LM79 and LM80 reports, of modal NO: PHILIPS RC740B LED
36S/840 PSD WH.
80
-
-
OD24662/2024-2025 Supply, installation or fixing the LED bulb (9watt, with proper lumen of 600 to 700)
in the existing angle holder or pendent light fixture.
7
-
-
OD24663/2024-2025 Supply, installation, testing and commissioning of exhaust fan in the existing opening
making good damage, connection, testing, commissioning etc. as required. (a) 230
mm metal body (Make:- reputed brands or brand approved by the site engineer- light
duty)
7
-
-
OD24664/2024-2025 Supply, installation, testing and commissioning of LED Bulk head light with IP 63
protection. (Reputed brand or Brand approved by the site engineer)
4
-
-
90.3.19.3 Supply conveyance, installation, testing and commissioning the light fittings of
following types made from CRCA sheet 0.5mm thickness with all accessories and
lamps directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated
and sheathed round copper conductor flex wire or extending the original wiring and
giving connections as required1200 mm 1X20W LED Lamp with box type fixture
10
-
-
OD24676/2024-2025 Supply, Installation, Testing and Commissioning of 20 W LED round/Square surface
or recessed down light with cool or warm light with standard accessories for fixing in
the wall, ceiling, ACP, or other as per site condition. (Reputed brands LED down
light, Brand approved by the Engineer incharge)
15
-
-
OD24678/2024-2025 Supply, testing, installation and commissioning of chandelier light, of adjustable
height of minimum 100", LED type with necessary equipment's as
required.
2
-
-
90.15.4.2 Supply Conveyance, installation, testing and commissioning of 36/40W LED street
light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip
make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal
surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated
housing,acrylic cover complete with THD less than 10%, power factor greater than
0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver
compartment should be seperatly accessible for maintenance (LM 79&80
certificates from NABL accredited Third party lab to be produced mentioning chip
manufacturer)
10
-
-
OD24689/2024-2025 Supply, Installation testing and commissioning of LED Profile light of length 5M
with channel, drive, cover and other necessary equipment's for the installation
with IP protection of IP 20.
5
-
-
OD25001/2024-2025 Supply, Installation, Testing and commissioning of 1200 mm sweep ceiling fan
(BLDC), 5 star rated with minimum 3 year on site replacement warranty suitable to
work with regulator. The rate inclusive of 2 MD type fan regulator and 30 cm down
rod of standard accessories and wiring. The fan should deliver 230 cm m air delivery
capacity, 370 RPM speed. (Kulirma Josh or equivalent make)
24
-
-
OD25005/2024-2025 Supply, Installation, Testing and commissioning of heavy duty wall fan with a motor
capacitor with copper winding and 18” aerofoil blades, spinning at 1400 RPM.
Designed with a 90° widespread oscillation. with maximum 3 speed operation.
10
-
-
Safety Equipment
-
-
-
OD23588/2024-2025 Charge for creating proper identification marks on the DB, TPN DB, VDB and panel
board. as per the standards of KEI,KSEB,KSCADC
15
-
-
OD23589/2024-2025 Providing and Fixing of Electrical ISI Grade Rubber Mat suitable for
440Volts Switchboards.
2
-
-
OD23590/2024-2025 Supply and installation of fire bucket with stand.
3
-
-
OD23591/2024-2025 S/F DCP fire extinguisher (5Kg): supply and installation of 5kg Dry chemical
power type (DCP) fire extinguishers having ISI mark along with mounting supports
etc.as required.
2
-
-
7.10 Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate
with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60
cm long and fixing the same in ground as required.
50
-
-
Panel Board
-
-
-
90.14.1.2 Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of
the following components/ devices & complying to IS 8623.<br>
Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly
as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved
design and requirement, with front and rear access facility, bus bar chambers, hinged
doors for all switch gear compartments, earthing the doors using 4 sq mm braided
copper conductor, providing necessary cut-outs for mounting meters, relays,
indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber
and cable alley, powder coating the assembly after subjecting to 7 tank process etc as
required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles
etc shall not be used for the fabrication of panel assembly. The measurments will be
taken the area of the complete sheets used for panel board including partitions,
folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA
sheet, powder coated (excluding base frame)
15
-
-
90.14.2.1 Supply and providing 2mm SMC sheet as shrouding for bus interconnection /
terminations etc. including required nut & bolt etc.
10
-
-
90.14.3.2 Supply and providing heavy duty 'A' section neoprene gasket in the panel
boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet
35
-
-
90.14.4 Supply and fabrication conveyance and installation of base frame of panel board
using 75 x 40 mm rolled steel channel (ISMC)
20
-
-
90.14.5 Supply and fabrication conveyance and installation of angle iron frame work for wall
mounting panel board
15
-
-
90.14.6 Supply and providing copper bus bars including finger type SMC bus bar supports in
the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as
required.
3000
-
-
90.14.7 Supply and providing copper earth bus in the panel board
Net Total 2300.000Cum
cm
@6.27
2300
-
-
OD24988/2024-2025 Supply, Installation of Digital Multi Function Meter (MFM) for monitoring the current, voltage and frequency etc, of the circuit in the existing panel board. with all
necessary equipment's like CT and others.
1
-
-
OD24989/2024-2025 Supply, installation and commissioning of LED indicator light in the existing panel
board of all respective color for EB/ DG supply indication, with necessary control
wiring.
2
-
-
A/C
-
-
-
OD24695/2024-2025 Supply, Installation, Testing and Commissioning of 2.2 TR split Air condition system
(Panasonic Super Dyma Odu Casing/ or equivalent ) With minimum 4/5 star inverter
machine with Indoor, Outdoor, Control/ Communication cable, Stabilizers to cover
maximum of 300 to 320 Sq. Ft. area.
20
-
-
Audio
-
-
-
OD25095/2024-2025 Line array column Loudspeaker : Frequency Range (-10dB) 60 Hz – 20 kHz;
Coverage Angle Vertical: Switchable, Narrow Mode: 25° (±10°),
Broad Mode: 45° (±10°), Horizontal: 150°
(±20°); Sensitivity Narrow: (speech mode) 98 dB (1 kHz - 8 kHz)
(music mode) 93 dB (300 Hz - 18 kHz) Broad: (speech mode) 96 dB (1 kHz - 8 kHz)
(music mode) 92 dB (300 Hz - 18
kHz); Impedance 8 ohms; Power Rating 500 W (2000W peak);Sixteen 25 mm (1 in)
soft dome tweeters and four 125 mm (5 in) high-power LF drivers, arranged
coaxially. ( JBL CBT 70J-1 or equivalent with necessary equipment's)
4
-
-
OD25096/2024-2025 Digital Power Amplifier: Frequency Response (8Ω,20Hz - 20kHz)
±0.25dB , BLU link Signal-to-Noise Ratio (ref. rated power, 100V,20Hz -
20kHz) >108dB,Total Harmonic Distortion (at full rated power, from 20Hz -
20kHz) 0.35%,Input Impedance (Nominally balanced,
nominally unbalanced) 10 kΩ balanced, 5 kΩ un balanced, Load
Impedance Bridge Mono 4Ω - 16Ω; 140Vrms and 200Vrms,Analog
Input Signal to Noise Ratio ( 100V,20Hz - 20kHz) >104dB. ( Crown
NCDI4X600BL-U-IN or equivalent with necessary equipment's)
1
-
-
OD25100/2024-2025 Stage Fill Speakers: 8" High Output Indoor/Outdoor Speaker , support PowerTapping at
70V/100V.Frequency Range (-10 dB)1 45 Hz – 20 kHz, Power Rating 240W
Continuous Program (2hrs),Maximum SPL 112 dB ave. Continuous Pink Noise (118
dB peak),Sensitivity 91 dB, 1W/1m (ave. 100 Hz – 10 kHz),Coverage Angle
100° x 100°,Nominal Impedance 8 ohms (THRU setting), 8”
woofer with woven fiberglass cone,1” PEI diaphragm tweeter with
fluid cooling. (JBL CONTROL 28-1 or equivalent with all necessary
equipment's )
2
-
-
OD25101/2024-2025 Analog Power Amplifier: Rated Power into 4 Ω or 8 Ω;1kHz, ≤
0.5% THD 300W,Number of Output Channels 2,Frequency Response (8Ω,
20Hz - 20kHz ,tone controls set to flat response) +/- 1.0 dB, Total Harmonic
Distortion (THD) (@ Full rated power, 20Hz20kHz) <0.5%, Signal- ( Crown NCSA2300Z-34-IN or equivalent with all
accessories)
1
-
-
OD25103/2024-2025 Power Subwoofer:1 x 18" High Power array able Subwoofer system with power
rating 800W
Continuous at 8 Ohms. Long-Term System Power Rating : 800 W (3200 W peak),
100 hrs, Maximum SPL3 : 30 Hz – 100 Hz: 129 dB-SPL cont avg (135 dB
peak),System Sensitivity (dB-SPL, 1W @ 1m) : 30 Hz –100 Hz: 98 dB,
Nominal Impedance: 8 ohms. ( JBL ASB6118 or equivalent with all necessary
equipment's)
1
-
-
OD25106/2024-2025 Sub woofer Accessories - Bracket Mount :Eyebolt kit for subs HARDWARE KIT,
SP/VS. Chain / bracket to suspend the subwoofer. ( JBL 229-00009-01 or equivalent
with necessary equipment's )
1
-
-
OD25108/2024-2025 Digital Power Amplifier: DCi Series, Network Based Multichannel Digital Power
Amplifier with 4 x 1250W; built-in DSP and BLU Link. Frequency Response
(8Ω, 20Hz - 20kHz) ±0.25dB, Total Harmonic Distortion (at full
rated power, 20Hz -20kHz) 0.35%, Damping Factor (20Hz to 100Hz) >1500,Load
Impedance Bridge Mono 4Ω - 16Ω; 140Vrms and
200Vrms,Dimensions (W x H x D) 19 in x 3.5 in x 17 in. ( Crown DCI4X1250N-UNPFX or equivalent with all accessories )
1
-
-
OD25113/2024-2025 Mixing Console:16-Channel Mixing Console, Max. 10 Mic / 16 Line Inputs (8 mono
+ 4 stereo),4 GROUP Buses + 1 Stereo Bus,4 AUX (incl. FX),“DPRE” mic preamps with an inverted Darlington circuit,1-Knob compressors, High-grade effects: SPX with 24
programs, PAD switch on mono inputs,+48V phantom power, XLR balanced outputs,
Internal universal power supply for world-wide use, Rack Mount Kit
Included, Metal chassis. ( Yamaha MG16X CV or equivalent equipment with
necessary equipment's)
1
-
-
OD25115/2024-2025 Digital Signal Processor : 12x8 Signal Processor with BLU link .12 Analog Inputs
(with 48v Phantom Power per Channel) ,8 Analog Outputs, Frequency Response:
20Hz-20KHz (+0.5dB/-1dB),48 Channel, Low Latency, Fault Tolerant Digital Audio
Bus,12 Control Inputs and 6 Logic Outputs for GPIO Integration, Dims: (H(U)
x W x D): 1.75" (1U) x 19" x 9.0"(45mm x 483mm x
229mm),Weight: 6.4 lbs / 2.9 kg. ( BSS BSSBLU100M-EU or equivalent with all
necessary equipment's)
1
-
-
OD25117/2024-2025 Wireless Handheld Microphone: Automatic frequency setup, Up to 16 preprogrammed
frequencies within the same frequency band., Up to14 hours battery life and battery
status information in hours, Audio bandwidth 35 – 20 000 Hz (±
3dB). ( AKG AKG-WMS470 Vocal Set D5 or equivalent with all equipment's)
2
-
-
OD25119/2024-2025 Wireless Microphone - Lapel: Wireless Lapel Microphone with omni-directional
Pick-up Pattern or better, Carrier frequency range 500 – 865 MHz Modulation
FM (Frequency Modulation) or better, T.H.D. at 1 kHz typ. 0.8% Signal/noise ratio
typ. 105 dB(A) or better, Operating range : 8 Hour. ( AKG AKG-Perception-45 or
equivalent with necessary equipment's )
2
-
-
OD25122/2024-2025 Wired Handheld Microphone: Super cardioid polar pattern ensures utmost gain before
feedback and ambient noise suppression with heavy-duty metal body , Audio
frequency bandwidth 70 -20000 Hz , Sensitivity 2.6 mV/Pa, Electrical
impedance 600 Ohms, Recommended load impedance 2000 Ohms. ( AKG D5S
MICROPHONE or equivalent with all equipment's)
2
-
-
OD25123/2024-2025 LongArmMicStand:TypeFloorStand,Height920-1500mm,BaseDia230mm,Weight
4.60kg. ( ahuja DGN)
2
-
-
OD25125/2024-2025 Tabletop Gooseneck Microphone: 50cm(20in) wired table top gooseneck condenser
micropho.ne with Cardioid polar pattern (AKG CGN521STS or equivalent with
necessary equipment's)
2
-
-
OD25126/2024-2025 Supply installation testing and commissioning of floor box suitable for fixing the
power, data, voice wire. The rate inclusive of the termination of the box.
4
-
-
90.6.5.5 Supply and drawing the following sizes of multi-core PVC insulated & FRLS
PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming
to IS 694 part I 1960 in the existing surface / recess conduit as required including
giving necessary connections of the following sizes.2 core 2.50 sq mm
680
-
-
OD25138/2024-2025 Supply, Laying, Testing and Commissioning of 2 core shielded microphone cable
with all necessary accessories through the existing 20/ 25 mm PVC conduit. ( Krystal
Digital mic cable 2core or equivalent)
500
-
-
Lightning Protection
-
-
-
90.16.3.18 Supply and clamping the following size of strips on surface of wall/ parapet/ existing
cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty
GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages,
colour washing etc. as required ( for horizontal run)25 x 3 mm aluminium strip
315
-
-
90.16.4.15 Supply and clamping the following sizes of strips on surface of wall / parapet/
existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or
heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the
damages, colour washing etc. as required ( for vertical run).25 x 3 mm aluminium
strip
115
-
-
5.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and
providing masonry enclosure with cover plate having locking arrangement and
watering pipe etc. with charcoal/ coke and salt as required
2
-
-
5.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including
accessories, and providing masonry enclosure with cover plate having locking
arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as
required.
6
-
-
5.9 Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip
earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer
etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt
& spring washer spaced at 50mm)
250
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements