Kerala Small Industries Development Corporation Limited Tender

e-tender for Office and Medicine/Store Room Partitioning Works at Trivandrum [For more details refer tender documents]

Front Office Partitions :- L Shape Bourbon Cherry finish on cherry veneer border and walnut inlays bordering Bird's Eye maple panels.Choice of Espresso finish on Walnut veneer or With the rich Bourbon Cherry finish featuring bird's eye maple inlays you can create a more traditional, conservative setting. By choosing the Espresso finish, you can achieve a more modern aesthetic with contemporary accents such as frosted glass doors and brushed silver pulls.Reception Counter Organizers can be installed in two directions offering choice of horizontal or vertical openings. 1650 CM

Medicine Counter & Store Room Partitions Providing and fixing Koreyan Board partition with Hard Wood frame which includes 65mm Square studs (0.55mm thick having one flange of 34 mm and another flange of 36 mm made of hardwood) placed at 610mm centre to centre vertically, in 50mm thick floor and ceiling channel (0.55mm thick having equal flanges of 32mm made of Hardwood). Rate shall be also inclusive of 48mm studs horizontal @ skirting level, 1200mm & 2400mm level from floor level reinforced with seasoned salwood. The Wood framework to be continued right up to the True ceiling, with double Skin of koreyan board which includes tapered edge 12.5mm thick koreyan (conforming to IS 2095-1982 & 2542-1981) screw fixed with 25mm dry wall screw at 300mm c/c to either side of existing framework studs. Necessary cut-out shall be provided for taking of supply and return air ducts/openings which shall be neatly finished after fixing of ducts thereby leaving no gaps. The intermediate gap shall be filled by Providing and filling glass wool insulation of density 24 kg per cum, of TWEGA make wrapped in RP Tissues on both sides as per manufacturer's specifications, 12mm thick as per manufacturer's specifications etc. complete.Feature MDF jali partition made out of 25mm thick Laser cut MDF, finished in Duco paint / polish with back lit lacker glass / Acrylic sheet as suitable. Supply an erection of glass enclosure in 12mm toughned glass required for lift.