Kerala Small Industries Development Corporation Limited Tender

Special type Executive high back Revolving chairs with Imported fiber handle, extra cushion Back Tilting Mechanism High Pressure Hydraulic gas lift 100 mm with Cover Powder Coated Metal (OR) Nylon/SS Base with imported Nylon Wheel

Visitor Chair –Mesh/Cushioned or pvc Back Cushioned Seat Fixed Frame 3 Year One Site Warranty

New storage installing Fully made of HDF 18 mm thick Top with knockdown fitting,2mm thick PVC Edge banded, 2 tone addition lipping for Storage tops and legs 3 Partition inside Size : 900X400X1200mm

Supply and Installation of Aluminium Partition: consisting of Aluminium Sections 63.5 MM X 38.1 MM X 1.0 MM thick hollow anodized of Jindal / Hind Alco make conforming to IS733 and IS 1285. The anodizing shall be transparent and complying IS 1868 (minimum anodic coating of grade AC 15). The Sections would be installed at an interval of 3’6” vertically and bottom section of Aluminium snap beading for glazing/paneling etc. and 5 mm thick float Transparent Glass including providing screw less aluminium glazing clip. Bottom up to 3’ Ht Will be provided with 8 MM thick both side pre-laminated particle board flat pressed 3 layer conforming to IS12823 Grade I type II of of interior grade complete with fixing clips, fasteners, filling up of gaps at junction, top, bottom, & sides with required PVC/Neoprene felt etc.. The joints shall be smooth, mitred and jointed with cleat angle etc…(Wood Material) Top Closed

Supply ad Installation of Aluminium Partition: consisting of Aluminium Sections 63.5 MM X 38.1 80 Sqft 590 47200.00 MM X 1.0 MM thick hollow anodized of Jindal / Hind Alco make conforming to IS733 and IS 1285. The anodizing shall be transparent and complying IS 1868 (minimum anodic coating of grade AC 15). The Sections would be installed at an interval of 3’6” vertically and bottom section of Aluminium snap beading for glazing/paneling etc. and 5 mm thick float Transparent Glass including providing screw less aluminium glazing clip. Bottom up to 3’ Ht Will be provided with 8 MM thick both side pre-laminated particle board flat pressed 3 layer conforming to IS12823 Grade I type II of of interior grade complete with fixing clips, fasteners, filling up of gaps at junction, top, bottom, & sides with required PVC/Neoprene felt etc.. The joints shall be smooth, mitred and jointed with cleat angle etc…(Wood Material)

New storage installing Fully made of HDF 18 mm thick Top with knockdown fitting,2mm thick PVC Edge banded, 2 tone addition lipping for Storage tops and legs 3 Partition inside Size : 900X400X1200mm

Providing and fixing of modular partition 75 mm thick for employees and cabin cubicals 50-60 microns powder coated CRCA partitions with pre punched cut outs to run electric & networking cables. Dual Race ways with punch-out to fix electrical and data modules for power & data at skirting level & just below table top, Writing board (White Board), Pin up board (Soft Board ). Partitions are covered with 9mm tiles (Pre laminated particle Board/Fabric Cladded Board) as required by using sliding panel method, Level Adjusters and all the visible edges of partitions are covered with curved Aluminum trims. Supply and installation of free standing straight table of (or nearest size) The Table Top shall be made of 25mm thick side leg 18mm MDF Double side laminated board with PVC edge band lipping. CPU tray and Keyboard tray Shall be provided. The rate shall be inclusive of cost and conveyance of all material, labour, transportation, loading - unloading charges and

Supplying Medium back chair. The seat and the backrest shall be made up of molded polyurethane foam of the right density and thickness, facilities like Pneumatic height adjustment, center tilt mechanism, tilt locking, swivel mechanism, five pronged base with twin castor wheels. 3 Year One Site Warranty