Kerala Small Industries Development Corporation Limited Tender

ELLIPTICAL TRAINER - . Providing and fixing using, Minimum 100 NB G.I. C CLASS pipes for MAIN FRAME, Minimum 40 NB G.I. pipe for FOOT REST PIPE, Minimum 40NB & 25 NB G.I. pipe for HANDLE, Minimum 25 NB & 40 NB GI B-CLASS Pipe for CONNECTING PIPE, LLDP Rotomoulded seat with inbuilt bolts 3/8" X 1.5" for FOOT REST, Nylon 66 injection moulded BEARING CAP & PIPE CAP, fully Done by first coat of Primer – jotun Brad 40-50 Micron thickness and Top Coat of pure polyester powder with 70- 80 micron thickness POWDER COAT including cost of concrete foundation , all materials, labour, etc all complete as per the instruction of Engineer in-charge

AIR WALKER - Providing and fixing Walker single - using, Minimum 100 NB GI C-class Pipe- for MAIN FRAME, minimum 32 NB GI B-CLASS Pipe- for LEG FRAME, Minimum 25 NB GI B-CLASS Pipe for HANDLE FRAME, NYLON 66 INJECTION MOULDED CASING CLAMPS,LLDP Rotomoulded seat with inbuilt bolts 3/8" X 1.5" FOOT REST, Nylon 66 injection Moulded BEARING CAP & PIPE CAP, fully Done by first coat of Primer – jotun Brad 40-50 Micron thickness and Top Coat of pure polyester powder with 70- 80 micron thickness POWDER COAT including cost of concrete foundation , all materials, labour, etc all complete as per the instruction of Engineer in-charge

BENCH WITH FIXED WEIGHT - Providing and fixing Bench with fix weight using, 100 NB G.I C-Class pipe for main frame, 32 NB G.I B-Class pipe for Bench frame, 20 NB G.I B-Class pipe for Handle frame, fully Done by first coat of Primer – jotun Brad 40-50 Micron thickness and Top Coat of pure polyester powder with 70- 80 micron thickness POWDER COAT including cost of concrete foundation , all materials, labour, etc all complete as per the instruction of Engineer incharge

STANDING TWISTER TRIPPLE - – Providing and fixing using Minimum 100 NB GI C-class Pipe for MAIN FRAME, Minimum 25 NB GI B-CLASS Pipe for HANDLE FRAME, LLDP Rotomoulded seat with inbuilt bolts 3/8" X 1.5" for TWISTER DISC, Minimum 25 NB & 20 NB GI B-class Pipe for SEATING FRAME, Minimum 80 NB GI B-class Pipe for SEATINGFRAME STAND, Minimum 80 NB GI B-CLASS Pipe for TWISTER STAND, Minimum 25 NB GI B-CLASS Pipe for TWISTER HANDLE FRAME, LLDP Plastic- TWISTER DISC, Nylon 66 injection moulded BEARING CAP & PIPE CAP, fully Done by first coat of Primer – jotun Brad 40-50 Micron thickness and Top Coat of pure polyester powder with 70- 80 micron thickness POWDER COAT including cost of concrete foundation , all materials, labour, etc all complete as per the instruction of Engineer in-charge

LEG PRESS/LEG EXERCISE - Providing and fixing using Minimum 100 NB GI C-class Pipe for MAIN FRAME 100 Nb Gi Bclass Pipe Leg Frame : 32 Nb Gi B class Pipe Handle Frame : 25 NB Gi B class Pipe Clamps :Nylon 66 Injection Moulded casing Foot Rest : Lldp Rotomoulded Seat with Inbuilt Bolts 3/8”X1.5’.Pipe Cap : Nylon 66 Injection moulded.Bearing Cap :Nylon 66 injection moulded. Bearing Housing And Pin – seamless pipe and Round Ba bearings : Permanent Sealed of reputed Make (fag/skf) Powder coat : Done By Pure Polyester powder with 70-80 Micron Thickness POWDER COAT including cost of concrete foundation , all materials, labour,etc all complete as per the instruction of Engineerin-charge

PULL UPS/HAND EXERCISE - RProviding and fixing using Minimum 100 NB GI C-class Pipe for MAIN FRAME Galvanised steel, Fastners :Stainless steel 304 grade with polycaped Post top Cap : G.I. post of wall thickness 3mm Handle frame size : 32mm/1.25” OD GI post of wall thickness 3 mm Powder coat : Done By Pure Polyester powder with 70-80 Micron Thickness POWDER COAT including cost of concrete foundation , all materials, labour, etc all complete as per the instruction of Engineer in-charge

HAND ROWER/ROWER - Providing and fixing Rider - using, Minimum 100 NB GI C-class Pipe- for MAIN FRAME, Minimum 32 NB GI B-CLASS pipe for SEAT FRAME, Minimum 40 NB & 25 NB B CLASS GI B-CLASS Pipe for HANDLE FRAME, Minimum 32NB & 25NB GI BCLASS pipe with two handles for LEG REST, LLDP Rotomoulded seat with inbuilt bolts 3/8" X 1.5" for FOOT REST & SEAT REST, Nylon 66 injection moulded BEARING CAP & PIPE CAP, fully Done by first coat of Primer – jotun Brad 40-50 Micron thickness and Top Coat of pure polyester powder with 70- 80 micron thickness POWDER COAT including cost of concrete foundation , all materials, labour, etc all complete as per the instruction of Engineer incharge

CHEST PRESS CUM SHOULDER PRESS- CHEST PRESS CUM SHOULDER PRESS – Providing and fixing using Minimum 100 NB GI C -class Pipe for MAIN FRAME 100 Nb Gi Bclass Pipe Leg Frame : 32 Nb Gi B class Pipe Handle Frame : 25 NB Gi B class Pipe Clamps :Nylon 66 Injection Moulded casing Foot Rest : Lidp Rotomoulded Seat with Inbuilt Bolts 3/8”X1.5’.Pipe Cap : Nylon 66 Injection moulded. Bearing Cap :Nylon 66 injection moulded. Bearing Housing And Pin – seamless pipe and Round Ba bearings : Permanent Sealed of reputed Make (fag/skf) Powder coat : Done By Pure Polyester powder with 70-80 Micron Thickness POWDER COAT including cost of concrete foundation , all materials, labour, etc all complete as per the instruction ofEngineer incharge . HORSE RIDER –Product Dimension L97cm(302Ft)*W 55 cm(1.8ft)*H120 cm(4ft) Material- Galvanized steel Fastners-Stainless Steel 304 grade with polycapedPost top CapHigh Density Aluminium Sitting Seat Polyethylene.Handle grips-HD Rubber coatedPostSize- 115mm/4.5”OD G.I post of wall thickness 3mm Powder coating-80 micron Akzo nobel electrostatic coated Area Required-Length 150cm(5Ft)*Width 150cm(5ft)