Kerala Rural Water Supply And Sanitation Agency Tender

5.22.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

10.1 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

100.98.192 Supply of PE Pipe, PE100, PN16, 63mm dia, conforming to IS 4984/2016.

od263965/2023_2024 "Laying HDPE pipes (IS : 4984)on land portion including conveying within initial lead and aligning the pipes, electro-fusion welding using automatic or semi automatic electrofusion machines, testing the pipe line thus fabricated to suit the hydrulic working pressure and after testing , aligning the pipeline, lowering the pipe in position into the trenches already made, testing the line to suitable pressure with potable water before back filling and leveling the trenches including all labour charge, hire for appliances etc. complete but excluding cost of pipe and fittings.br63 mm OD HDPE pipe"br

100.98.151 Supply of PE Pipe, PE100, PN10, 50mm dia, conforming to IS 4984/2016.

od264086/2023_2024 "Laying HDPE pipes (IS : 4984)on land portion including conveying within initial lead and aligning the pipes, electro-fusion welding using automatic or semi automatic electrofusion machines, testing the pipe line thus fabricated to suit the hydrulic working pressure and after testing , aligning the pipeline, lowering the pipe in position into the trenches already made, testing the line to suitable pressure with potable water before back filling and leveling the trenches including all labour charge, hire for appliances etc. complete but excluding cost of pipe and fittings.br50 mm OD HDPE pipe"br

100.1.1 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidatingeach deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil (Ref. Item No. 2.10.1 of DSR

100.59.1 Cutting the bituminous / concrete roads with cutting machine for a minimum depth of 200mm along the sides of proposed alignment of the pipe to be laid without causing any damage to other utilities, including the charges for hire and conveyance of tools and plant, cost of consumables and charges for lighting, watching, ribbon fencing, caution boards, traffice diversion, and as per the direction of departmental officers etc. complete, before carrying out the demolition of bituminous / concrete road by mechanical means and carrying out the excavation.

4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

od264118/2023_2024 Providing and laying G.I. pipes including conveyance and labour charge etc completebr65 mm dia nominal bore

water quality test - physical and chemical

APPENDIX B - KADOOPPARA WSS

pump and accessories,panel board PUMP AND ACCESSORIES - Supplying and installing 12 HP OPENwell submersible pumpset with ISI mark and specifications with all accessories as per the duty condition confirming to relovent ISI specificaton and mark -including Oil immersed Star Delta starter, 8K VAR Power capacitor, Single phase preventorCable 6 2.1 sqm, Earthing material, Pressure Guage with siphon and Valve, NR Valve, Sluice Valve, Panel board of size 2.5 x 2 feet including volt meter; ammeter, selector switch, 100A MCCB. 300MA ELCB, 63 o Fuse unit 3nos and panel board wiring with No cables, Supply & Fixing MS supporting clamps. with Pump set erection charges including welding the column pipes with flanges, bend and fitting valves including the cost of rubber mat, nuts, bolts, labour charge, conveyance charge etc

100.53.1 Washing OHSR/GLSR using brooms, brushes and bleaching powder by engaging coolies, scrubbing twice, washing and cleaning using fresh water, including side wall, floor slab and columns, disposing the the slurry / waste materilas away from the immediate premises and within the initial lead of 50m from the periphery of the tank, without causing any damage to the exististing strucutre and installations, charges including the operation of valves, conveyance and hire charges of tools and as per the direction of the department officers etc. complete.

10.1 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

10.25.1 Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete

50.18.9.6.1 Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 10Kgf/cm2

water quality test - physical and chemical

APPENDIX C - MUKKUZHI WSS

pump and accessories,panel board , water quality test - pump and accessories,panel board PUMP AND ACCESSORIES - Supplying and installing 5 HP OPENwell submersible pumpset with ISI mark and specifications with all accessories as per the duty condition confirming to relovent ISI specificaton and mark -including Oil immersed Star Delta starter, 8K VAR Power capacitor, Single phase preventorCable 6 2.1 sqm, Earthing material, Pressure Guage with siphon and Valve, NR Valve, Sluice Valve, Panel board of size 2.5 x 2 feet including volt meter; ammeter, selector switch, 100A MCCB. 300MA ELCB, 63 o Fuse unit 3nos and panel board wiring with No cables, Supply & Fixing MS supporting clamps. with Pump set erection charges including welding the column pipes with flanges, bend and fitting valves including the cost of rubber mat, nuts, bolts, labour charge, conveyance charge etc

18.12.3 Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work25 mm dia nominal bore

18.12.4 Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work32 mm dia nominal bore

100.1.1 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidatingeach deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil (Ref. Item No. 2.10.1 of DSR)

100.59.1 Cutting the bituminous / concrete roads with cutting machine for a minimum depth of 200mm along the sides of proposed alignment of the pipe to be laid without causing any damage to other utilities, including the charges for hire and conveyance of tools and plant, cost of consumables and charges for lighting, watching, ribbon fencing, caution boards, traffice diversion, and as per the direction of departmental officers etc. complete, before carrying out the demolition of bituminous / concrete road by mechanical means and carrying out the excavation.

4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

APPENDIX D - THOTTIPPARA DHANALAKSHMI WSS

100.54.3.1 Desilting open wells of dia above 3.5m and up to 6.0m and depth up to 4.5m by earth work excavation in or under water, after closing the inlet valves and plugging any holes in the steining by engaging divers with breathing accessories, bailing out water using pumset of suitable capacity, lifting the excavated silt/mud/clay using ropes, pulleys and buckets and disposing the same within minimum lead of 50 m from the periphery of the well, including engaging coolies for scrapping the inner side of the well, without causing any damages to the existing structures and installations, including hire and conveyance of tools and plant and as per the directions of the department officers etc. complete.

100.98.151 Supply of PE Pipe, PE100, PN10, 50mm dia, conforming to IS 4984/2016.

od264007/2023_2024 "Laying HDPE pipes (IS : 4984)on land portion including conveying within initial lead and aligning the pipes, electro-fusion welding using automatic or semi automatic electrofusion machines, testing the pipe line thus fabricated to suit the hydrulic working pressure and after testing , aligning the pipeline, lowering the pipe in position into the trenches already made, testing the line to suitable pressure with potable water before back filling and leveling the trenches including all labour charge, hire for appliances etc. complete but excluding cost of pipe and fittings.br50 mm OD HDPE pipe"br

100.1.1 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidatingeach deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil (Ref. Item No. 2.10.1 of DSR)

4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

pump and panel board pump and accessories,panel board PUMP AND ACCESSORIES - Supplying and installing 10 HP OPENwell submersible pumpset with ISI mark and specifications with all accessories as per the duty condition confirming to relovent ISI specificaton and mark -including Oil immersed Star Delta starter, 8K VAR Power capacitor, Single phase preventorCable 6 2.1 sqm, Earthing material, Pressure Guage with siphon and Valve, NR Valve, Sluice Valve, Panel board of size 2.5 x 2 feet including volt meter; ammeter, selector switch, 100A MCCB. 300MA ELCB, 63 o Fuse unit 3nos and panel board wiring with No cables, Supply & Fixing MS supporting clamps. with Pump set erection charges including welding the column pipes with flanges, bend and fitting valves including the cost of rubber mat, nuts, bolts, labour charge, conveyance charge etc

water quality test - physical and chemical