Kerala Police Housing And Construction Corporation Limited Tender

od12712/2024_2025 : Supplying and fixing good quality Wall paper i/c all materials, fixing and labour charges etc complete as per direction of Engineer in charge

od12751/2024_2025 : Supplying and fixing of moisture/ fire resistant 8mm thick heavy duty fiber cement board (High pressuresteam cured) conforming to IS 14862:2000 of category III type B as per standard sizes fixed with selfdrilling/ tapping screws etc complete as per direction from engineer in charge

10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

od13008/2024_2025 : Supplying Iron Adjustable rack of size 3(L)x1.5(W)x5(H) feet of 5 Layer rack as per direction of Engineer in charge

21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

od14040/2024_2025 : Providing and fixing Laminated PVC sheet in panelling fixed in aluminium doors, window shutters,<br>partitions frames and shelf sections etc with CP brass/ stainless steel screws etc complete as per<br>direction of engineer in charge.<br>

$Electrical Works

1.10.1 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group A

1.17.3 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

1.53.1 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable

1.31 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

od12859/2024_2025 : Supply, conveyance, installation, testing and commissioning wall mounting fan of the following sizes using mounting brackets supplied along with the fan and giving connection with existing wire.

od12846/2024_2025 : Fancy Warm white Wall LED Lights for Home Decoration Indoor (5W-10W)

od13052/2024_2025 : Supply, Installation, Testing and commissioning of pedestal fan, 400mm sweep make: Havells/Crompton/V-Guard

od14048/2024_2025 : Supply and providing Cat 6 UTP cable Patch chord <br>2 Mtr length

od14049/2024_2025 : Supply and providing 2 U cabinet (HCL make) powder coated with glass panel front door including cable management system and giving connections etc as required.

od14145/2024_2025 : Supply,installation,testing and commisioning of following port switch (10/100/1000 mbps) 8 Port GIGABIT Desktop Switch D-Link/ TP-Link approved make,giving connections etc. complete as required.