Kerala Police Housing And Construction Corporation Limited Tender

OD7666/2024-2025 Multistage Vertical Centrifugal (Inline) Pump MV series are non self priming with mechanical shaft seal and bearings lubricated by the pumped liquid. Model MVC 10/12, 180LPM @ 85MWC, powered by a totally enclosed fan cooled A.C. induction motor, Stainless steel impellers, shaft and stage casings on a factory fitted common base frame,. The quoted rate shall includes control wiring ,cable trays with all accessories required for connections between Pump panel

OD7667/2024-2025 Fabrication, supply, erection, testing and commissioning of Motor control panel of cubicle type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel and including all components as required. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant. MAKE: FABRICATED Incomer - 250A TPN Isolator - 1 No. 250A 433V, 25kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement RYB phase indicating LED lamps with control fuses and switches - 1 set. Multifunction meter as per IEC 62053-21, specified above including CTs and all accessories - 1set(incomer) Outgoings 200A TP ISOLATOR for 50HP pump along with starter w/o OLR, controllers, PB, indicators and all other accessories required as per fire norms - 1no. 63A TP ISOLATOR for 10HP pump along with starter w/o OLR, controllers, PB, indicators and all other accessories required as per fire norms - 1 nos. 63A TP ISOLATOR - 2 nos.

OD7669/2024-2025 Supply, Installation, Testing and Commissioning of Y-Strainer of Ductile Cast Iron body Flanged ends with stainless steel strainer suitable for 150 mm Pipe

OD7689/2024-2025 Providing and fixing wafer type,S.G iron, without lugs,lever operated Butterfly valves (PN16) complete with all accessories - 150mm

OD7691/2024-2025 Providing and fixing wafer type,S.G iron, without lugs,lever operated Butterfly valves (PN16) complete with all accessories- 100mm dia

OD7693/2024-2025 Providing and fixing wafer type,S.G iron, without lugs,lever operated Butterfly valves (PN16) complete with all accessories- 80mm dia

OD7694/2024-2025 Providing and fixing wafer type,S.G iron, without lugs,lever operated Butterfly valves (PN16) complete with all accessories- 50mm dia

OD7698/2024-2025 Supply,Installation, Testing and Commissioning of double flanged horizontal type Non-Return Valve as per IS 5312 of following sizes having CI body and SS Disk,with nuts bolts, gaskets etc - 100mm dia

OD7708/2024-2025 Supply,Installation, Testing and Commissioning of double flanged horizontal type Non-Return Valve as per IS 5312 of following sizes having CI body and SS Disk, with nuts bolts, gaskets etc - 80mm dia

OD7709/2024-2025 Supply,Installation, Testing and Commissioning of Air cushion tank (air-vessel) 150 mm dia. x 1.5 M high with dished top, made of minimum 6 mm thick M.S. pipe/plate complete with 25 mm dia. Brass Air Valve (Ball valve, pressure gauge type), 25 mm dia. Stop with brass stop cock, nipple, tees, elbow, pipe, drain valve and all accessories as required incl. fixing brackets

OD7710/2024-2025 Supply,Installation,Testing and Commissioning of Pressure switch bellow type

OD7711/2024-2025 Supply, Installation,Testing and Commissioning of Pressure gauge with 0 to 200PSI,25 mm dia.

OD7714/2024-2025 Supply,Installation,Testing & Commissioning of Bronze body lever operated stainless steel ball valve (PN 25) of approved make with necessary MTA fittings in position for hose reel drain as per drawings.- 20mm dia

OD7715/2024-2025 Supply,Installation,Testing & Commissioning of Bronze body lever operated stainless steel ball valve (PN 25) of approved make with necessary MTA fittings in position for hose reel drain as per drawings.- 25mm dia

OD7716/2024-2025 Supply,Installation, Testing and Commissioning of SS single headed Hydrant Valve 80mm inlet with single outlet fitted with 63mm instantaneous female coupling on the outlet complete with flange as required blank cap and chain. Conforming to IS:5290 and of ISI mark. for internal & external yard

OD7718/2024-2025 Supply & Installation of SS short branch pipe conforming to IS: 903 of I S I mark with 63 mm dia instantaneous coupling on one end and nozzle spray or fog type.

OD7720/2024-2025 Supply and Fixing of weather proof Hose cabinet suitable size " 30 x24 x10 inch having made of 16 gauge MS Sheet with common keylock arrangements, suitable to accommodate two lengths of 15mtr hoses,one headed hydrant valves and one no branch pipe with nozzle. The cabinet shall be painted to scarlet red colour out side and off-white inside. for internal and external-Fabricated

OD7723/2024-2025 Supply, installation, testing and commissioning of 63mm dia 15 M long non percolating flexible and light weight synthetic fire fighting delivery hose type A IS:636 with textile reinforcement, resistant to chemicals, acids, alkalis, abrasions, heat and ozone having 36Kg/cm 2 burst pressure including gunmetal make and instantaneous type coupling IS:903 approved by fire authority, machine would with copper wire complete in all respects

OD7724/2024-2025 Supply,Installation, Testing and Commissioning of swing type Hose reel drum made of 16 gauge MS sheet to keep 19 mm dia 30 Mtrs long PVC lined rubber braded hose pipe with GM nozzle on one end and all other necessary fixing materials.

OD7728/2024-2025 Supply, installation, testing and commissioning of Fire Brigade Inlet connection with 2 nos of 63 mm dia. built - in Gun metal Non- return valves instantaneous coupling type in a 16 swg Ms cabinet.

OD7729/2024-2025 Supply, installation, testing and commissioning of Tank Filling Inlet connection with 2 nos of 63 mm dia. built - in Gun metal Non- return valves instantaneous coupling type in a 16 swg Ms cabinet.

OD7731/2024-2025 Supply, installation, testing and commissioning of Draw Out Built in Gun metal 63 mm dia spring loaded check valve for connecting to sump and main header compltete with all hardware items

OD7732/2024-2025 Supplying and fixing of CI Foot valve of 100mm dia, heavy type including all accessories

OD7734/2024-2025 Supply,Installation,Testing and Commissioning of Air Release Valve GM 20mm dia type of approved make.

OD7787/2024-2025 "Above Ground Piping: Supply, Installation, Testing and Commissioning of GI B class pipe as per IS:1239 welded joints The above ground pipe are to be applied with two coats of zinchromate primer and two coats of enamel paint of approved colour- 150mm dia "

OD7788/2024-2025 "Above Ground Piping: Supply, Installation, Testing and Commissioning of GI B class pipe as per IS:1239 welded joints The above ground pipe are to be applied with two coats of zinchromate primer and two coats of enamel paint of approved colour- 100mm dia "

OD7790/2024-2025 "Above Ground Piping: Supply, Installation, Testing and Commissioning of GI B class pipe as per IS:1239 welded joints The above ground pipe are to be applied with two coats of zinchromate primer and two coats of enamel paint of approved colour- 80mm dia "

OD7792/2024-2025 "Above Ground Piping: Supply, Installation, Testing and Commissioning of GI B class pipe as per IS:1239 welded joints The above ground pipe are to be applied with two coats of zinchromate primer and two coats of enamel paint of approved colour- 65mm dia "

OD7794/2024-2025 "Above Ground Piping: Supply, Installation, Testing and Commissioning of GI B class pipe as per IS:1239 welded joints The above ground pipe are to be applied with two coats of zinchromate primer and two coats of enamel paint of approved colour -50mm dia "

OD7796/2024-2025 "Above Ground Piping: Supply, Installation, Testing and Commissioning of GI B class pipe as per IS:1239 welded joints The above ground pipe are to be applied with two coats of zinchromate primer and two coats of enamel paint of approved colour- 40mm dia "

OD7798/2024-2025 "Above Ground Piping: Supply, Installation, Testing and Commissioning of GI B class pipe as per IS:1239 welded joints The above ground pipe are to be applied with two coats of zinchromate primer and two coats of enamel paint of approved colour- 32mm dia "

OD7799/2024-2025 "Above Ground Piping: Supply, Installation, Testing and Commissioning of GI B class pipe as per IS:1239 welded joints The above ground pipe are to be applied with two coats of zinchromate primer and two coats of enamel paint of approved colour- 25mm dia "

OD7802/2024-2025 Sprinkler Bulbs : Supply,Installation,Testing and Commissioning of 15 mm gun metal sprinkler heads Quick response standard coverage with quarts bulb ,rosset plate set to operate at a specified temperature as per the specifications. Temperature of operation 68 degree , K 80, UL APPROVED ( Pendant Sprinkler)

OD7804/2024-2025 Supply, Installation,Testing and Commissioning of unbraided Sprinkler Flexible Drop type of UL Listed

OD7805/2024-2025 Supply, installation, testing and commissioning of Microprocessor based 1 Loop analogue Addressable type fire alarm control panel with 7" touchscreen display with 2/3 user level protection for field programming without using any kind of DONGLE OR SPECIAL CABLE, The panel should be equipped with minimum 1 numbers of loop with 15% spare capacity with each loop shall have a capacity of 125 analog addressable devices in one loop. Four access levels, flash EPROM sufficient numbers of programmable relay controls for pressurization fans, ventilation fans and water curtain (Deluge valve) 220 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and then be capable of operating the system for 2 hours during an emergency conditions as required.

OD7807/2024-2025 Supply, installation, testing and commissioning of addressable wall mounted loop powdered or externally powdered Hooter with strobe (with addressable control module and external powder supply), having multitone, surface or flash mounted along with all necessary hardwares.

OD7809/2024-2025 Supply, installation, testing and commissioning of Intelligent Addressable Manual Call point with integral microprocessor complete soft/hard address as per specifications.

OD7860/2024-2025 Supply,Installation,Testing and Commissioning of photo electric type smoke detector with base complete as required.

OD7861/2024-2025 Supply, laying, testing and commisioning and making terminations for 2 Core x 1.5 Sq.mm cable, Armoured Screened FRLS Twin Twisted PVC Insulated copper cable, red color along with all accessories required for complete installation, making terminations etc where required

OD7862/2024-2025 Supply,installation,testing & commisioning of microprocess based automatic control console of 12 zones with digital LCD display, inbuilt amplifier of 80 Watts complete with floor to floor announcing and talk back facilities with the following features and made functional: (a) Feather type keypads to select the zones. (b) Moulded plastic attractive enclosure. (c)Backlight Liquid Crystal Display (LCD) (d) Userfriendly interactive display. (e) Announcement selector-PTT Switch . (f) Listen selector switch. (g) All Call switch to select all zones simultaneously for announcement (h)Zones Call Display On the LCD With Audio Alarm. Panel to be installed in the Fire Control Room.

OD7864/2024-2025 Supply , installation , testing and commisioning of Public Address speaker with talk back facility 6 Watts with LMT and call switch , made out of powder coated CRCA sheet , wall mounting type and to be installed at a height of not less than 150 CM from the finished floor levels, suitable for concealed mounting.

OD8152/2024-2025 Supply, installation, testing and commissioning of 1 x 6W, 240 V, 1 ph, 50 Hz indoor type emergency exit light fixture with 1.3 AH 4hrs battery back up unit, LED Lamps, indicating Fire Exit, recess mounted type. 24hrs x 7days working conditional.

OD8153/2024-2025 Fire Exit, Exit, Fire Lift & Fire Duct signage at each stair on every floor, indicating the direction of fire exit, lettering size shall be 7.5 cm with contrasting color from back ground as per standards. Size shall be 15cm x 60cm.

OD8154/2024-2025 Providing and fixing in positions the signages with printed SAFE ASSEMBLY AREA of 1.25 cm height letters in red with white back ground .The size of the board shall be 40 x30 cm and shall be fixed in the safe assembly areas demarked outside the building

OD8155/2024-2025 Supply and fixing of ABC Powder based Fire Extinguisher of capacity 4 kg filled with Mono Ammonium Phosphate with nitrogen as per IS 15683with control disc mechanism