Kerala Police Housing And Construction Corporation Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 1,00,000Document Cost
₹ 8,850Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_KPHCC_724095_1Tender No
NIT No.183/KPHCC/2024-25Tender Authority
Kerala Police Housing And Construction Corporation Limited ViewPurchaser Address
-Website
http://https://kphccltd.kerala.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
OD40027/2024-2025
9 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
687.47
-
-
... More
5.3
Reinforced cement concrete work in beams, suspended floors, roofs, having slope up
to 15&landings, balconies, shelves, chajjas, lintels, bands,
plain window sills, staircases and spiral stair cases up to floor five level excluding the
cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5
coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
13.15
-
-
... More
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete above plinth level.Thermo - Mechanically
Treated bars of grade Fe-500D or more
1314.9
-
-
... More
5.9.3
Centering and shuttering including strutting, etc. and removal of form for:Suspended
floors, roofs, landings, balconies and access platform
80.04
-
-
... More
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels,
beams, plinth beams, girders bressumers and cantilevers
91.1
-
-
... More
OD49241/2024-2025
Providing and laying vitrified floor tiles in different sizes (thickness to be specified bythe manufacturer) with water absorption less than 0.08% and conforming to IS :
15622, of approved make, in all colours and shades, laid on 20 mm thick cement
mortar 1:4(1 cement : 4 coarse sand), (Excluding grouting the joints with white
cement and matching pigment).Size of Tile 800x 800 mm
518.88
-
-
... More
11.48.3
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout
mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg
of resin per kg). including filling /grouting and finishing complete as per direction of
Engineer-in-charge.Size of Tile 800x800mm
518.88
-
-
... More
11.37
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be
specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved
make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick
cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with
white cement and matching pigment etc., complete.
225.58
-
-
... More
8.13.1
Providing and laying Polished Granite stone flooring in required design and
patterns, in linear as well as curvilinear portions of the building all complete as
per the architectural drawings with 18 mm thick stone slab over 20 mm (average)
thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with
cement slurry and pointing with white cement slurry admixed with pigment of
matching shade including rubbing , curing and polishing etc. all complete as
specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet
Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
47.85
-
-
... More
9.1.1
Providing wood work in frames of doors, windows, clerestory windows and other
frames, wrought framed and fixed in position with hold fast lugs or with dash
fasteners of required dia & length (hold fast lugs or dash fastener shall be paid
for separately).Second class teak wood
1.69
-
-
... More
9.5.1.1
Providing and fixing panelled or panelled and glazed shutters for shutters for doors,
windows and clerestory windows, including ISI marked M.S. pressed butt hinges
bright finished of required size with necessery screws, excluding panelling which will
be paid for separately, all complete as per direction of Engineer - in-charge.
Second class teak wood35 mm thick shutters
49.06
-
-
... More
9.53
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10
mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block
30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size)
58
-
-
... More
9.72.4
Providing and fixing bright finished brass butt hinges with necessary screws etc.
complete:100x70x4 mm (ordinary type)
118
-
-
... More
9.76
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6
levers and a pair of lever handles of approved quality with necessary screws etc.
complete.
8
-
-
... More
9.82
Providing and fixing bright finished brass hanging type floor door stopper with
necessary screws, etc. complete.
8
-
-
... More
9.74.2
Providing and fixing bright finished brass tower bolts (barrel type) with necessary
screws etc. complete:200x10 mm
16
-
-
... More
9.74.4
Providing and fixing bright finished brass tower bolts (barrel type) with necessary
screws etc. complete:100x10 mm
86
-
-
... More
9.81.3
Providing and fixing bright finished brass handles with screws etc. complete:75 mm
43
-
-
... More
50.10.1
Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.)
trusses etc., including cutting, hoisting,fixing in position and applying a priming coat
of approved steel primer, including welding and bolted with special shaped washers
etc. complete
203.18
-
-
... More
13.62.1
Painting with synthetic enamel paint of approved brand and manufacture of required
colour to give an even shade:Two or more coats on new work over an under coat of
suitable shade with ordinary paint of approved brand and manufacture .
15.48
-
-
... More
10.26.3
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing,
balcony railing, staircase railing and similar works, including applying priming coat
of approves steel primer.G.I. pipes
374.58
-
-
... More
9.121
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of crosssection 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of
30 mm thickness. The laminated shall be moulded with fire resistant grade
unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm
thick and shall be filled with suitable wooden block in all the three legs. The frame
shall be covered with fiber glass from all sides. M.S. stay shall be provided at the
bottom to steady the frame.
55
-
-
... More
9.122.1
Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced
Plastic (FRP) panelled door shutter of required colour and approved brand and
manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to
3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and
suitable blocks of seasoned wood inside at required places for fixing of fittings, cast
monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856,
including fixing to frames.
18.69
-
-
... More
21.1.1.1
Providing and fixing aluminium work for doors, windows, ventilators and partitions
with extruded built up standard tubular sections/ appropriate Z sections and other
sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash
fasteners of required dia and size, including necessary filling up the gaps at junctions,
i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed
mechanically wherever required including cleat angle, Aluminnium snap beading for
glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural
drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash
fasteners to be paid for separately):
For fixed portionAnodised aluminium (anodised transparent or dyed to required shade
according to IS : 1868, Minimum anodic coating of grade AC 15)
274.62
-
-
... More
21.1.2.2
For shutters of doors, windows & ventilators including providing and fixing
hinges / pivots and making provision for fixing of fittings wherever required
including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid
for separately)Powder coated aluminium (minimum thickness of powder coating 50
micron)
110.85
-
-
... More
21.2.2
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer
or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling
fixed in aluminum doors, windows shutters and partition frames with C.P. brass /
stainless steel screws etc. complete as per architectural drawings and directions of
Engineer - in- Charge.Pre- laminated particle board with decorative lamination on
both sides
37.68
-
-
... More
21.3.1
Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the
architectural drawings and the directions of Engineer - in -Charge. ( Cost of
aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm
thickness
38.02
-
-
... More
21.3.2
Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the
architectural drawings and the directions of Engineer - in -Charge. ( Cost of
aluminium snap beading shall be paid in basic item):With float glass panes of 5.50
mm thickness
15
-
-
... More
21.18
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved
brand and manufacture, including providing and fixing top & bottom pivot
& spring type fixing arrangement and making necessary holes etc. for fixing
required door fittings, all complete as per direction of Engineer-in-charge ( Door
handle, lock and stopper etc to be paid separately)
18.6
-
-
... More
12.45.1
Providing and fixing false ceiling at all height including providing and fixing of frame
work made of special sections, power pressed from M.S. sheets and galvanized with
zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of
angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at
1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm
dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers
of 25x10x0.50 mm of required length with nuts & bolts of required size and
other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm
running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5
mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of
10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to
G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm
long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27
mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to
wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall
screws @ 230 mm interval, including fixing of gypsum board to ceiling section and
perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c,
including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing
compound in 3 layers covering upto 150 mm on both sides of joint and two coats of
primer suitable for board, all as per manufacturer's specification and also
including the cost of making openings for light fittings, grills, diffusers, cutouts made
with frame of perimeter channels suitably fixed, all complete as per drawings,
specification and direction of the Engineer in Charge but excluding the cost of
painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS :
2095-Part 1
201.23
-
-
... More
22.5
Providing and laying water proofing treatment in sunken portion of WCs, bathroom
etc., by applying cement slurry mixed with water proofing cement compound
consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with
water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air
cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with
water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air
cure for 4 hours followed with water curing for 48 hours. The rate includes
preparation of surface, treatment and sealing of all joints, corners, junctions of pipes
and masonry with polymer mixed slurry.
21.08
-
-
... More
OD41653/2024-2025
Providing water cutting for sunshade, roof slab etc in cement mortor 1:3, 12mm thick
& 15mm wide in lines and levels including cost, conveyance and unloading
charge of materials, all labour charges, formwork,scaffolding charges,
watering,curing etc.
108
-
-
... More
16.68
Providing and laying 60 mm thick factory made cement concrete interlocking paver
block of M - 30 grade made by block making machine with strong vibratory
compaction, of approved size, design & shape, laid in required colour and
pattern over and including 50 mm thick compacted bed of coarse sand, filling the
joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
38
-
-
... More
CIVIL WORKS FF
-
-
-
... More
50.6.2.2
Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or
nearest available size confirming to IS 2185 part I of 1979 for super structure up to
floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc
complete
136.9
-
-
... More
13.4.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)
1582.61
-
-
... More
OD40028/2024-2025
9 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
644
-
-
... More
5.3
Reinforced cement concrete work in beams, suspended floors, roofs, having slope up
to 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands,
plain window sills, staircases and spiral stair cases up to floor five level excluding the
cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5
coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
12.08
-
-
... More
5.9.3
Centering and shuttering including strutting, etc. and removal of form for:Suspended
floors, roofs, landings, balconies and access platform
73.44
-
-
... More
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels,
beams, plinth beams, girders bressumers and cantilevers
84.15
-
-
... More
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete above plinth level.Thermo - Mechanically
Treated bars of grade Fe-500D or more
1207.7
-
-
... More
OD49245/2024-2025
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by
the manufacturer) with water absorption less than 0.08% and conforming to IS :
15622, of approved make, in all colours and shades, laid on 20 mm thick cement
mortar 1:4(1 cement : 4 coarse sand), (Excluding grouting the joints with white
cement and matching pigment).Size of Tile 800x 800 mm
509.84
-
-
... More
11.48.3
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout
mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg
of resin per kg). including filling /grouting and finishing complete as per direction of
Engineer-in-charge.Size of Tile 800x800mm
509.84
-
-
... More
22.5
Providing and laying water proofing treatment in sunken portion of WCs, bathroom
etc., by applying cement slurry mixed with water proofing cement compound
consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with
water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air
cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with
water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air
cure for 4 hours followed with water curing for 48 hours. The rate includes
preparation of surface, treatment and sealing of all joints, corners, junctions of pipes
and masonry with polymer mixed slurry.
21.88
-
-
... More
11.37
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved
make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick
cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with
white cement and matching pigment etc., complete.
200
-
-
... More
8.13.1
Providing and laying Polished Granite stone flooring in required design and
patterns, in linear as well as curvilinear portions of the building all complete as
per the architectural drawings with 18 mm thick stone slab over 20 mm (average)
thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with
cement slurry and pointing with white cement slurry admixed with pigment of
matching shade including rubbing , curing and polishing etc. all complete as
specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet
Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
50.01
-
-
... More
9.1.1
Providing wood work in frames of doors, windows, clerestory windows and other
frames, wrought framed and fixed in position with hold fast lugs or with dash
fasteners of required dia & length (hold fast lugs or dash fastener shall be paid
for separately).Second class teak wood
2.65
-
-
... More
9.5.1.1
Providing and fixing panelled or panelled and glazed shutters for shutters for doors,
windows and clerestory windows, including ISI marked M.S. pressed butt hinges
bright finished of required size with necessery screws, excluding panelling which will
be paid for separately, all complete as per direction of Engineer - in-charge.
Second class teak wood35 mm thick shutters
63.9
-
-
... More
9.53
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10
mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block
30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size)
58
-
-
... More
9.72.4
Providing and fixing bright finished brass butt hinges with necessary screws etc.
complete:100x70x4 mm (ordinary type)
164
-
-
... More
9.74.2
Providing and fixing bright finished brass tower bolts (barrel type) with necessary
screws etc. complete:200x10 mm
8
-
-
... More
9.74.4
Providing and fixing bright finished brass tower bolts (barrel type) with necessary
screws etc. complete:100x10 mm
148
-
-
... More
9.81.3
Providing and fixing bright finished brass handles with screws etc. complete:75 mm
74
-
-
... More
9.76
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6
levers and a pair of lever handles of approved quality with necessary screws etc.
complete.
4
-
-
... More
9.82
Providing and fixing bright finished brass hanging type floor door stopper with
necessary screws, etc. complete.
4
-
-
... More
50.10.1
Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.)
trusses etc., including cutting, hoisting,fixing in position and applying a priming coat
of approved steel primer, including welding and bolted with special shaped washers
etc. complete
349.65
-
-
... More
13.62.1
Painting with synthetic enamel paint of approved brand and manufacture of required
colour to give an even shade:Two or more coats on new work over an under coat of
suitable shade with ordinary paint of approved brand and manufacture .
26.64
-
-
... More
10.26.3
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing,
balcony railing, staircase railing and similar works, including applying priming coat
of approves steel primer.G.I. pipes
423.62
-
-
... More
9.121
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of crosssection 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of
30 mm thickness. The laminated shall be moulded with fire resistant grade
unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm
thick and shall be filled with suitable wooden block in all the three legs. The frame
shall be covered with fiber glass from all sides. M.S. stay shall be provided at the
bottom to steady the frame.
55
-
-
... More
9.122.1
Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced
Plastic (FRP) panelled door shutter of required colour and approved brand and
manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to
3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and
suitable blocks of seasoned wood inside at required places for fixing of fittings, cast
monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856,
including fixing to frames.
18.48
-
-
... More
21.1.1.1
Providing and fixing aluminium work for doors, windows, ventilators and partitions
with extruded built up standard tubular sections/ appropriate Z sections and other
sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash
fasteners of required dia and size, including necessary filling up the gaps at junctions,
i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed
mechanically wherever required including cleat angle, Aluminnium snap beading for
glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural
drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash
fasteners to be paid for separately):
For fixed portionAnodised aluminium (anodised transparent or dyed to required shade
according to IS : 1868, Minimum anodic coating of grade AC 15)
476.85
-
-
... More
21.1.2.2
For shutters of doors, windows & ventilators including providing and fixing
hinges / pivots and making provision for fixing of fittings wherever required
including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid
for separately)Powder coated aluminium (minimum thickness of powder coating 50
micron)
81.29
-
-
... More
21.2.2
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer
or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling
fixed in aluminum doors, windows shutters and partition frames with C.P. brass /
stainless steel screws etc. complete as per architectural drawings and directions of
Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides
57.42
-
-
... More
21.3.1
Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the
architectural drawings and the directions of Engineer - in -Charge. ( Cost of
aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm
thickness
94.04
-
-
... More
21.3.2
Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the
architectural drawings and the directions of Engineer - in -Charge. ( Cost of
aluminium snap beading shall be paid in basic item):With float glass panes of 5.50
mm thickness
11
-
-
... More
12.45.1
Providing and fixing false ceiling at all height including providing and fixing of frame
work made of special sections, power pressed from M.S. sheets and galvanized with
zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of
angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at
1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm
dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers
of 25x10x0.50 mm of required length with nuts & bolts of required size and
other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm
running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5
mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of
10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to
G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm
long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27
mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to
wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall
screws @ 230 mm interval, including fixing of gypsum board to ceiling section and
perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c,
including jointing and finishing to a flush finish of tapered and square edges of the
board with recommended jointing compound, jointing tapes, finishing with jointing
compound in 3 layers covering upto 150 mm on both sides of joint and two coats of
primer suitable for board, all as per manufacturer's specification and also
including the cost of making openings for light fittings, grills, diffusers, cutouts made
with frame of perimeter channels suitably fixed, all complete as per drawings,
specification and direction of the Engineer in Charge but excluding the cost of
painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS :
2095-Part 1
12.45.1
Providing and fixing false ceiling at all height including providing and fixing of frame
work made of special sections, power pressed from M.S. sheets and galvanized with
zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of
angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at
1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm
dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers
of 25x10x0.50 mm of required length with nuts & bolts of required size and
other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm
running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5
mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of
10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to
G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm
long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27
mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to
wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall
screws @ 230 mm interval, including fixing of gypsum board to ceiling section and
perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c,
including jointing and finishing to a flush finish of tapered and square edges of the
board with recommended jointing compound, jointing tapes, finishing with jointing
compound in 3 layers covering upto 150 mm on both sides of joint and two coats of
primer suitable for board, all as per manufacturer's specification and also
including the cost of making openings for light fittings, grills, diffusers, cutouts made
with frame of perimeter channels suitably fixed, all complete as per drawings,
specification and direction of the Engineer in Charge but excluding the cost of
painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS :
2095-Part 1
333.81
-
-
... More
OD41654/2024-2025
Providing water cutting for sunshade, roof slab etc in cement mortor 1:3, 12mm thick
& 15mm wide in lines and levels including cost, conveyance and unloading charge of materials, all labour charges, formwork,scaffolding charges,
watering,curing etc.
108
-
-
... More
CIVIL WORKS SF
-
-
-
... More
50.6.2.3
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15cm
or nearest available size confirming to IS 2185 part I of 1979 for super structure
above floor two level upto floor five level with thickness 15cm in : CM 1:6 ( 1
cement : 6 coarse sand) etc complete
169.92
-
-
... More
13.4.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)
2132.38
-
-
... More
OD40415/2024-2025
9 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
644
-
-
... More
5.3
Reinforced cement concrete work in beams, suspended floors, roofs, having slope up
to 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands,
plain window sills, staircases and spiral stair cases up to floor five level excluding the
cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5
coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
14.03
-
-
... More
5.9.3
Centering and shuttering including strutting, etc. and removal of form for:Suspended
floors, roofs, landings, balconies and access platform
73.44
-
-
... More
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels,
beams, plinth beams, girders bressumers and cantilevers
110.4
-
-
... More
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete above plinth level.Thermo - Mechanically
Treated bars of grade Fe-500D or more
1403.4
-
-
... More
OD49246/2024-2025
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by
the manufacturer) with water absorption less than 0.08% and conforming to IS :
15622, of approved make, in all colours and shades, laid on 20 mm thick cement
mortar 1:4(1 cement : 4 coarse sand), (Excluding grouting the joints with white
cement and matching pigment).Size of Tile 800x 800 mm
509.84
-
-
... More
11.48.3
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout
mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg
of resin per kg). including filling /grouting and finishing complete as per direction of
Engineer-in-charge.Size of Tile 800x800mm
509.84
-
-
... More
11.37.Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be
specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved
make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick
cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with
white cement and matching pigment etc., complete.
200
-
-
... More
8.13.1
Providing and laying Polished Granite stone flooring in required design and
patterns, in linear as well as curvilinear portions of the building all complete as
per the architectural drawings with 18 mm thick stone slab over 20 mm (average)
thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with
cement slurry and pointing with white cement slurry admixed with pigment of
matching shade including rubbing , curing and polishing etc. all complete as
specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet
Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
48.87
-
-
... More
9.1.1
Providing wood work in frames of doors, windows, clerestory windows and other
frames, wrought framed and fixed in position with hold fast lugs or with dash
fasteners of required dia & length (hold fast lugs or dash fastener shall be paid
for separately).Second class teak wood
3.07
-
-
... More
9.5.1.1
Providing and fixing panelled or panelled and glazed shutters for shutters for doors,
windows and clerestory windows, including ISI marked M.S. pressed butt hinges
bright finished of required size with necessery screws, excluding panelling which will
be paid for separately, all complete as per direction of Engineer - in-charge.
Second class teak wood35 mm thick shutters
82.78
-
-
... More
9.53
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10
mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block
30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size)
98
-
-
... More
9.72.4
Providing and fixing bright finished brass butt hinges with necessary screws etc.
complete:100x70x4 mm (ordinary type)
194
-
-
... More
9.74.2
Providing and fixing bright finished brass tower bolts (barrel type) with necessary
screws etc. complete:200x10 mm
28
-
-
... More
9.74.4
Providing and fixing bright finished brass tower bolts (barrel type) with necessary
screws etc. complete:100x10 mm
138
-
-
... More
9.81.3
Providing and fixing bright finished brass handles with screws etc. complete:75 mm
69
-
-
... More
9.76
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6
levers and a pair of lever handles of approved quality with necessary screws etc.
complete.
14
-
-
... More
9.82
Providing and fixing bright finished brass hanging type floor door stopper with
necessary screws, etc. complete.
14
-
-
... More
9.83
Providing and fixing aluminium die cast body tubular type universal hydraulic door
closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight
upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc.
complete.
1
-
-
... More
50.10.1
Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.)
trusses etc., including cutting, hoisting,fixing in position and applying a priming coat
of approved steel primer, including welding and bolted with special shaped washers
etc. complete
326.03
-
-
... More
13.62.1
Painting with synthetic enamel paint of approved brand and manufacture of required
colour to give an even shade:Two or more coats on new work over an under coat of
suitable shade with ordinary paint of approved brand and manufacture .
24.84
-
-
... More
10.26.3
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing,
balcony railing, staircase railing and similar works, including applying priming coat
of approves steel primer.G.I. pipes
463.22
-
-
... More
9.121
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of crosssection 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of
30 mm thickness. The laminated shall be moulded with fire resistant grade
unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm
thick and shall be filled with suitable wooden block in all the three legs. The frame
shall be covered with fiber glass from all sides. M.S. stay shall be provided at the
bottom to steady the frame.
55
-
-
... More
9.122.1
Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced
Plastic (FRP) panelled door shutter of required colour and approved brand and
manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to
3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and
suitable blocks of seasoned wood inside at required places for fixing of fittings, cast
monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856,
including fixing to frames.
18.48
-
-
... More
21.1.1.1
Providing and fixing aluminium work for doors, windows, ventilators and partitions
with extruded built up standard tubular sections/ appropriate Z sections and other
sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash
fasteners of required dia and size, including necessary filling up the gaps at junctions,
i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed
mechanically wherever required including cleat angle, Aluminnium snap beading for
glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural
drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash
fasteners to be paid for separately):
For fixed portionAnodised aluminium (anodised transparent or dyed to required shade
according to IS : 1868, Minimum anodic coating of grade AC 15)
267.16
-
-
... More
21.1.2.2
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required
including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid
for separately)Powder coated aluminium (minimum thickness of powder coating 50
micron)
103.46
-
-
... More
21.2.2
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer
or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling
fixed in aluminum doors, windows shutters and partition frames with C.P. brass /
stainless steel screws etc. complete as per architectural drawings and directions of
Engineer - in- Charge.Pre- laminated particle board with decorative lamination on
both sides
36.72
-
-
... More
21.3.1
Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the
architectural drawings and the directions of Engineer - in -Charge. ( Cost of
aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm
thickness
44.44
-
-
... More
21.3.2
Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the
architectural drawings and the directions of Engineer - in -Charge. ( Cost of
aluminium snap beading shall be paid in basic item):With float glass panes of 5.50
mm thickness
14
-
-
... More
22.5
Providing and laying water proofing treatment in sunken portion of WCs, bathroom
etc., by applying cement slurry mixed with water proofing cement compound
consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with
water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air
cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with
water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air
cure for 4 hours followed with water curing for 48 hours. The rate includes
preparation of surface, treatment and sealing of all joints, corners, junctions of pipes
and masonry with polymer mixed slurry.
22.05
-
-
... More
12.45.1
Providing and fixing false ceiling at all height including providing and fixing of frame
work made of special sections, power pressed from M.S. sheets and galvanized with
zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of
angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at
1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm
dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers
of 25x10x0.50 mm of required length with nuts & bolts of required size andother end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm
running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5
mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of
10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to
G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm
long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27
mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to
wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall
screws @ 230 mm interval, including fixing of gypsum board to ceiling section and
perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c,
including jointing and finishing to a flush finish of tapered and square edges of the
board with recommended jointing compound, jointing tapes, finishing with jointing
compound in 3 layers covering upto 150 mm on both sides of joint and two coats of
primer suitable for board, all as per manufacturer's specification and also
including the cost of making openings for light fittings, grills, diffusers, cutouts made
with frame of perimeter channels suitably fixed, all complete as per drawings,
specification and direction of the Engineer in Charge but excluding the cost of
painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS :
2095-Part 1
256.9
-
-
... More
OD41655/2024-2025
Providing water cutting for sunshade, roof slab etc in cement mortor 1:3, 12mm thick
& 15mm wide in lines and levels including cost, conveyance and unloading
charge of materials, all labour charges, formwork,scaffolding charges,
watering,curing etc.
N
108
-
-
... More
CIVIL WORKS TF
-
-
-
... More
50.6.2.3
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15cm
or nearest available size confirming to IS 2185 part I of 1979 for super structure
above floor two level upto floor five level with thickness 15cm in : CM 1:6 ( 1
cement : 6 coarse sand) etc complete
142.57
-
-
... More
13.4.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)
1757.41
-
-
... More
OD40608/2024-2025
9 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
644
-
-
... More
5.3 Reinforced cement concrete work in beams, suspended floors, roofs, having slope up
to 15& landings, balconies, shelves, chajjas, lintelscoarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size)., bands,
plain window sills, staircases and spiral stair cases up to floor five level excluding the
cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
12.38
-
-
... More
5.9.3
Centering and shuttering including strutting, etc. and removal of form for:Suspended
floors, roofs, landings, balconies and access platform
73.44
-
-
... More
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels,
beams, plinth beams, girders bressumers and cantilevers
92.6
-
-
... More
5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
1237.7
-
-
... More
OD49248/2024-2025
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by
the manufacturer) with water absorption less than 0.08% and conforming to IS :
15622, of approved make, in all colours and shades, laid on 20 mm thick cement
mortar 1:4(1 cement : 4 coarse sand), (Excluding grouting the joints with white
cement and matching pigment).Size of Tile 800x 800 mm
509.84
-
-
... More
11.48.3
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout
mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg
of resin per kg). including filling /grouting and finishing complete as per direction of
Engineer-in-charge.Size of Tile 800x800mm
509.84
-
-
... More
11.37
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be
specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved
make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick
cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with
white cement and matching pigment etc., complete.
200
-
-
... More
8.13.1
Providing and laying Polished Granite stone flooring in required design and
patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average)
thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with
cement slurry and pointing with white cement slurry admixed with pigment of
matching shade including rubbing , curing and polishing etc. all complete as
specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet
Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
47.85
-
-
... More
9.1.1
Providing wood work in frames of doors, windows, clerestory windows and other
frames, wrought framed and fixed in position with hold fast lugs or with dash
fasteners of required dia & length (hold fast lugs or dash fastener shall be paid
for separately).Second class teak wood
2.66
-
-
... More
9.5.1.1
Providing and fixing panelled or panelled and glazed shutters for shutters for doors,
windows and clerestory windows, including ISI marked M.S. pressed butt hinges
bright finished of required size with necessery screws, excluding panelling which will
be paid for separately, all complete as per direction of Engineer - in-charge.
Second class teak wood35 mm thick shutters
66.46
-
-
... More
9.53
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10
mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block
30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size)
68
-
-
... More
9.72.4
Providing and fixing bright finished brass butt hinges with necessary screws etc.
complete:100x70x4 mm (ordinary type)
166
-
-
... More
9.74.2
Providing and fixing bright finished brass tower bolts (barrel type) with necessary
screws etc. complete:200x10 mm
14
-
-
... More
9.74.4
Providing and fixing bright finished brass tower bolts (barrel type) with necessary
screws etc. complete:100x10 mm
138
-
-
... More
9.76
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6
levers and a pair of lever handles of approved quality with necessary screws etc.
complete.
7
-
-
... More
9.81.3
Providing and fixing bright finished brass handles with screws etc. complete:75 mm
69
-
-
... More
9.82
Providing and fixing bright finished brass hanging type floor door stopper with
necessary screws, etc. complete.
7
-
-
... More
50.10.1
Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.)
trusses etc., including cutting, hoisting,fixing in position and applying a priming coat
of approved steel primer, including welding and bolted with special shaped washers
etc. complete
326.03
-
-
... More
13.62.1
Painting with synthetic enamel paint of approved brand and manufacture of required
colour to give an even shade:Two or more coats on new work over an under coat of
suitable shade with ordinary paint of approved brand and manufacture .
24.84
-
-
... More
10.26.3
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing,
balcony railing, staircase railing and similar works, including applying priming coat
of approves steel primer.G.I. pipes
423.62
-
-
... More
9.121
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of crosssection 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of
30 mm thickness. The laminated shall be moulded with fire resistant grade
unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm
thick and shall be filled with suitable wooden block in all the three legs. The frame
shall be covered with fiber glass from all sides. M.S. stay shall be provided at the
bottom to steady the frame.
45
-
-
... More
9.122.1
Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced
Plastic (FRP) panelled door shutter of required colour and approved brand and
manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to
3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and
suitable blocks of seasoned wood inside at required places for fixing of fittings, cast
monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856,
including fixing to frames.
15.12
-
-
... More
21.1.1.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions
with extruded built up standard tubular sections/ appropriate Z sections and other
sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash
fasteners of required dia and size, including necessary filling up the gaps at junctions,
i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed
mechanically wherever required including cleat angle, Aluminnium snap beading for
glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural
drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash
fasteners to be paid for separately):
For fixed portionAnodised aluminium (anodised transparent or dyed to required shade
according to IS : 1868, Minimum anodic coating of grade AC 15)
322.53
-
-
... More
21.1.2.2
For shutters of doors, windows & ventilators including providing and fixing
hinges / pivots and making provision for fixing of fittings wherever required
including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid
for separately)Powder coated aluminium (minimum thickness of powder coating 50
micron)
88.68
-
-
... More
21.2.2
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer
or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling
fixed in aluminum doors, windows shutters and partition frames with C.P. brass /
stainless steel screws etc. complete as per architectural drawings and directions of
Engineer - in- Charge.Pre- laminated particle board with decorative lamination on
both sides
45
-
-
... More
21.3.1
Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the
architectural drawings and the directions of Engineer - in -Charge. ( Cost of
aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm
thickness
66.8
-
-
... More
21.3.2
Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the
architectural drawings and the directions of Engineer - in -Charge. ( Cost of
aluminium snap beading shall be paid in basic item):With float glass panes of 5.50
mm thickness
12
-
-
... More
22.5
Providing and laying water proofing treatment in sunken portion of WCs, bathroom
etc., by applying cement slurry mixed with water proofing cement compound
consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed withwater proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air
cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with
water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air
cure for 4 hours followed with water curing for 48 hours. The rate includes
preparation of surface, treatment and sealing of all joints, corners, junctions of pipes
and masonry with polymer mixed slurry
22.37
-
-
... More
12.45.1
Providing and fixing false ceiling at all height including providing and fixing of frame
work made of special sections, power pressed from M.S. sheets and galvanized with
zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of
angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at
1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm
dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers
of 25x10x0.50 mm of required length with nuts & bolts of required size and
other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm
running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5
mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of
10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to
G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm
long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thickmm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to
wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall
screws @ 230 mm interval, including fixing of gypsum board to ceiling section and
perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c,
including jointing and finishing to a flush finish of tapered and square edges of the
board with recommended jointing compound, jointing tapes, finishing with jointing
compound in 3 layers covering upto 150 mm on both sides of joint and two coats of
primer suitable for board, all as per manufacturer's specification and also
including the cost of making openings for light fittings, grills, diffusers, cutouts made
with frame of perimeter channels suitably fixed, all complete as per drawings,
specification and direction of the Engineer in Charge but excluding the cost of
painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS :
2095-Part 1
323.88
-
-
... More
OD41656/2024-2025
Providing water cutting for sunshade, roof slab etc in cement mortor 1:3, 12mm thick
& 15mm wide in lines and levels including cost, conveyance and unloading
charge of materials, all labour charges, formwork,scaffolding charges,
watering,curing etc.
108
-
-
... More
CIVIL WORKS TERRACE FLOOR
-
-
-
... More
50.6.2.3
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15cm
or nearest available size confirming to IS 2185 part I of 1979 for super structure
above floor two level upto floor five level with thickness 15cm in : CM 1:6 ( 1
cement : 6 coarse sand) etc complete
50.22
-
-
... More
13.1.2
12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).
594.28
-
-
... More
OD41368/2024-2025
9 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
81.38
-
-
... More
OD41657/2024-2025
Providing water cutting for sunshade, roof slab etc in cement mortor 1:3, 12mm thick
& 15mm wide in lines and levels including cost, conveyance and unloading
charge of materials, all labour charges, formwork,scaffolding charges,
watering,curing etc.
51.6
-
-
... More
WATER SUPPLY AND SANITARY WORKS
-
-
-
... More
17.7.3
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32
mm C.P. brass waste of standard pattern, including painting of fittings and brackets,
cutting and making good the walls wherever require:White Vitreous China Wash
basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps
74
-
-
... More
17.2.1
Providing and fixing white vitreous china pedestal type water closet (European type
W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including
flush pipe, with manually controlled device (handle lever), conforming to IS : 7231,
with all fittings and fixtures complete, including cutting and making good the walls
and floors wherever required:W.C. pan with ISI marked white solid plastic seat and
lid
39
-
-
... More
17.3.1
Providing and fixing white vitreous china pedestal type water closet (European type)
with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P.
flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow
arrangement with specials of standard make and mosquito proof coupling of approved
municipal design complete, including painting of fittings and brackets, cutting and
making good the walls and floors wherever required :W.C. pan with ISI marked white
solid plastic seat and lid
1
-
-
... More
50.17.1.5
Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make )
including cost of materials and labour charges etc complete as per the direction of site
Engineer-in-charge.
40
-
-
... More
17.4.1
Providing and fixing white vitreous china flat back or wall corner type lipped front
urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with
automatic flushing cistern with standard flush pipe and C.P. brass spreaders with
brass unions and G.I. clamps complete, including painting of fittings and brackets,
cutting and making good the walls and floors wherever required:One urinal basin
with 5 litre white P.V.C. automatic flushing cistern
14
-
-
... More
50.17.1.3
Supplying and fixing CP Towel rod 60cm or nearest available length including cost of
materials and labour charges etc complete as per the direction of site Engineer-incharge.
40
-
-
... More
17.10.1.2
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983
with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and
brackets, cutting and making good the walls wherever required:
Kitchen sink with drain board510x 1040 mm bowl depth 225 mm
1
-
-
... More
50.17.1.1
Supplying and fixing Stainless steel soap dish including cost of materials and labour
charges etc complete as per the direction of site Engineer-in-charge.
13
-
-
... More
18.51.1
Providing and fixing C.P. brass long body bib cock of approved quality conforming to
IS standards and weighing not less than 690 gms.15 mm nominal bore
41
-
-
... More
18.54.3
Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal
bore, 165 mm long, weighing not less than 110 gms
3
-
-
... More
OD40353/2024-2025
Supply and fixing good quality 100mm dia CP shower with 450mm long shower arm
and 20mm shower cock including cost of material and labour charge etc. (Cera,
Jaquar, or equalent) complete.
13
-
-
... More
18.53.1
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of
approved quality conforming to IS: 893115 mm nominal bore
154
-
-
... More
17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap.
56
-
-
... More
OD40362/2024-2025
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement ,110x75mm PVC Multi Floor Trap
without Jali.
56
-
-
... More
50.18.8.3.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work, including cutting chases and making good the wall etc. 25 mm pipe
10kgf /cm2
170
-
-
... More
18.18.3
Providing and fixing ball valve (brass) of approved quality, High or low pressure,
with plastic floats complete:25 mm nominal bore
41
-
-
... More
50.18.9.14.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. this includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm
dia 6 Kgf/cm2 - External work - Exposed on wall
100
-
-
... More
50.18.9.4.1
Providing and fixing PVC pipes includings jointing of pipes with one step PVC
solvent cement, trenching, refilling & testing of joints complete as per direction
of Engineer in Charge.32 mm dia 10.Kgf/cm2
100
-
-
... More
50.18.9.7.1
Providing and fixing PVC pipes includings of pipes with one step PVC solvent
cement, trenching refilling & testing of joints complete as per direction of
Engineer in Charge. 63 mm dia 6Kgf/cm2
150
-
-
... More
50.18.9.18.2
Providing and fixing PVC pipes including fixing the pipe with clamps/Clips at 1.00 m
spacing. This included jointing of pipes with one step PVC solvent cement and testing
of joints complete as per direction of Engineer-in-Charge 75 mm dia 4 Kfg/cm2 -
External work - Exposed on wall
80
-
-
... More
50.18.9.8.1
Providing and fixing PVC pipes includings jointing of pipes with one step PVCsolvent cement, trenching, refilling & testing of joints complete as per direction
of Engineer in Charge. 75 mm dia 6 Kgf/ cm2
120
-
-
... More
50.18.9.21
Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 75 mm dia Elbow
40
-
-
... More
50.18.9.21.4
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 75 mm dia Bend
30
-
-
... More
50.18.9.21.3
Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes,
including jointing with PVC solvent cement -75 mm dia Door Elbow
40
-
-
... More
50.18.9.21.2
Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,
including jointing with PVC solvent cement -75 mm dia 45 degree Elbow
30
-
-
... More
50.18.9.21.7
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 75 mm dia Vent cowl
40
-
-
... More
50.18.9.19.1
Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00
m spacing . This includes jointing of pipes with one step PVC solvent cement and
testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6
Kgf/cm2 - External work- Exposed on wall
120
-
-
... More
50.18.9.9.2
Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent
cement, trenching, refilling & testing of joints complete as per direction of
Engineer in CHarge. 110 mm dia 4 Kg/cm2
160
-
-
... More
50.18.9.22.1
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 110 mm dia Elbow
40
-
-
... More
50.18.9.22.8
Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes,
including jointing with PVC solvent cement -110 mm dia Vent cowl
20
-
-
... More
50.18.9.22.4
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement- 110 mm dia Bend
20
-
-
... More
50.18.9.22.9
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement -110 mm dia offset
30
-
-
... More
50.18.9.22.3
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement-110 mm dia Door Elbow
25
-
-
... More
50.18.9.22.2
Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow
20
-
-
... More
50.18.9.22.5
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes
including jointing with PVC solvent cement 110x110x110 mm dia Tee
25
-
-
... More
50.18.9.22.6
Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 110x110x110 mm dia Door tee
25
-
-
... More
OD40373/2024-2025
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement-110 mm Y
20
-
-
... More
18.77
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc.
and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1
cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), including
finishing complete so as to make it leak proof.
36
-
-
... More
18.19.2.1
Providing and fixing gun metal non-return valve of approved quality (screwed end):
32 mm nominal boreHorizontal
4
-
-
... More
18.19.2.2
Providing and fixing gun metal non-return valve of approved quality (screwed end):32 mm nominal boreVertical
4
-
-
... More
18.48
Providing and placing on terrace (at all floor levels) polyethylene water storage tank
:ISI 12701 marked, with cover and suitable locking arrangement and making
necessary holes for inlet, outlet and overflow pipes but without fittings and the base
support for tank.
20000
-
-
... More
OD41660/2024-2025
Constructing inspection chambers of size 60 X 60cm inside the sewer lines up to a
depth not exceeding 60cm with pre cast solid blocks in cement mortar 1:6, 23cm (one
brick) thick walls, forming channels inside with cement concrete 1:4:8 using 40mm
broken stones, plastering the inside and channels with CM 1:3, 12mm thick with neat
cement flushing coat including RCC cover slab 75 mm thick including all earthwork
and foundation concrete 10cm thick.
5
-
-
... More
ELECTRICAL WORKS
-
-
-
... More
1.10.1
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm
FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.Group A
132
-
-
... More
1.10.2
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm
FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC
conduit,
with modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FRLS
PVC insulated copper conductor single core cable etc as required.Group B
300
-
-
... More
1.10.3
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm
FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC
conduit,
with modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FRLS
PVC insulated copper conductor single core cable etc as required.Group C
300
-
-
... More
1.11
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper
conductor single core cable in surface / recessed medium class PVC conduit, 2 way
modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FRLS PVC insulated copper conductor single core cable etc as required
23
-
-
... More
1.17.3
Supplying and drawing following sizes of FRLS PVC insulated copper conductor,
single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X
1.5 sq.mm
4000
-
-
... More
1.17.12
Supplying and drawing following sizes of FRLS PVC insulated copper conductor,
single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x
2.5 sq. mm
9548
-
-
... More
1.17.20
Supplying and drawing following sizes of FRLS PVC insulated copper conductor,
single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x
4 sq. mm
300
-
-
... More
1.17.21
Supplying and drawing following sizes of FRLS PVC insulated copper conductor,
single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x
4 sq. mm
1734
-
-
... More
1.24.1
Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as
required.5/6 amps switch
320
-
-
... More
1.24.2
Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as
required.2 way 5/6 amps switch
5
-
-
... More
1.24.3
Supplying and fixing following modular switch/ socket on the existing modular plate switch box including connections but excluding modular plate etc. as required.15/16 amp switch
150
-
-
... More
1.24.4
Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as
required.3 pin 5/6 amp socket outlet
300
-
-
... More
1.24.5
Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as
required.6 pin 15/16 amp socket outlet
150
-
-
... More
1.24.6
Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as
required.Telephone socket outlet
50
-
-
... More
1.24.7
Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as
required.TV antenna socket outlet
30
-
-
... More
1.24.8
Supplying and fixing following modular switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as
required.Bell push
15
-
-
... More
1.25
Supplying and fixing two module stepped type electronic fan regulator on the existing
modular plate switch box including connections but excluding modular plate etc. as
required.
150
-
-
... More
1.26
Supplying and fixing modular blanking plate on the existing modular plate &
switch box excluding modular plate as required.
500
-
-
... More
1.27.2
Supplying and fixing following size/ modules, GI box alongwith modular base &
cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)
150
-
-
... More
1.28.2
Supplying and fixing following Modular base & cover plate on existing modular
metal boxes etc. as required.3 Module
120
-
-
... More
1.31
Supplying and fixing suitable size GI box with modular plate and cover in front on
surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket
outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be
used in non residential buildings).
60
-
-
... More
1.33
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden
block including connection etc as required.
525
-
-
... More
1.34
Supplying and fixing brass batten/ angle holder including connection etc. as required.
120
-
-
... More
1.53.1
Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing
surface/recessed steel/PVC conduit as required1 run of Cable
15000
-
-
... More
1.56
Supplying and fixing suitable size Gl box with modular plate and cover in front on
surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket
outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light
plugs to be used in non residential buildings).
660
-
-
... More
1.58
Supplying and fixing PVC batten/ angle holder including connection etc. as required.
5
-
-
... More
OD41315/2024-2025
Supply and fixing of 3w WH outdoor wall light LODARCS-3D 3000K .including all
accessories as required
for complete installation .(Wipro/Luker/Equivalent)
20
-
-
... More
OD41316/2024-2025
Supply and fixing of Philips Prime Plus Ultraglow 15W Square White Led Downlight
or equivalent
300
-
-
... More
OD41317/2024-2025
Supply and installing outdoor spot light 50 w make bajaj or equivalent
15
-
-
... More
OD41318/2024-2025
Supply AND FIXING Wipro Garnet 18w Surface Panel or equivalent
50
-
-
... More
OD41319/2024-2025
Supply installation testing and commissioning of Crompton Led Flood Light 100W
Outdoor Waterproof
Led Flood Light | Wide Angle Beam fitting duly wired up for use on 230 V AC
supply(EQUIVALENT)
6
-
-
... More
OD41320/2024-2025
Supply and installation of sheet steel, phosphatised and painted, dust and vermin
proof enclosure of
MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable
for fixing MCB/
isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including
cutting hole on the wall ,
making good the damages, colour washing etc. as required 6 way phase sector type
three phase double
cover (IP 42/43)
8
-
-
... More
OD41321/2024-2025
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm
FRLS PVC<br>insulated
copper conductor single core cable in existing surface / recessed medium class PVC
conduit,<br>with
modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FRLS<br>PVC insulated copper conductor single core cable etc as
required.<br>Group B
150
-
-
... More
OD41322/2024-2025
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm
FRLS PVC<br>insulated
copper conductor single core cable in exiting surface / recessed medium class PVC
conduit,<br>with
modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FRLS<br>PVC
insulated copper conductor single core cable etc as required.&Group A
100
-
-
... More
OD41323/2024-2025
Supply installation testing and commissioning of 1200mm sweep ceiling fan with
down rod,240 volts,ISI
marked BEE 5 star with latest BLDC technology complete including fan blade set,ms
down rod of size 2
feet, clamps.fan capacitor, two nos of pvc canopy, rubber bush, split pin,holdfasteners etc complete all
as specified and directed. make- havells or equivalent
150
-
-
... More
OD41324/2024-2025
Supply and fixing of 6w WH outdoor wall light LODARCD-6D 3000K .including all
accessories as required
for complete installation (wipro/luker/equivalent)
6
-
-
... More
OD41325/2024-2025
Supply ,testing and fixing of 9w fancy light with led bulb including connection etc. as
required (make -philips,wipro or equivalent)
10
-
-
... More
OD41326/2024-2025
Supply, installation testing and commissioning of 2feet 10W led batten with 1000
Lumens ,50000 burning
hours,all accessories ,electrical connections.including fixing materials required.
makephilips/wipro/havells or equivalent
1
-
-
... More
OD41329/2024-2025
Supply installation testing and commissioning of 10W led die cast aluminium housing
bulk head IP65 with 1000 Lumens ,50000 burning hours,all accessories ,electrical connections.including fixing materials required. make-philips/wipro/havells or equivalent
1
-
-
... More
OD41330/2024-2025
Supply and fixing of 225 mm sweep Light Duty Exhaust fan in metal frame working
on 230 V A/C. make
Havells or equivalent make
5
-
-
... More
OD41331/2024-2025
Supply ,testing and fixing of skirting light 3module (make -legrand or equivalent)
1
-
-
... More
OD41332/2024-2025
Supplying and fixing porcelain connector including all charges
1
-
-
... More
OD41333/2024-2025
Supplying and fixing sintex box including all charges
1
-
-
... More
OD41335/2024-2025
Supply and fixing casing and capping of reputed brand (Legrand/ precision/ pressfit)with ISI mark. 25mm
100
-
-
... More
OD41336/2024-2025
Supplying and fixing suitable size of phenolic laminated sheet cover on existing box
58
-
-
... More
OD41337/2024-2025
Supply and fixing 9 W LED bulb make philips/govt approved reputed brand as
required
130
-
-
... More
OD41338/2024-2025
Supply and fixing 6W mirror light make philips , crompton, bajaj, or equivalant
reputed brand and giving
connection etc.
40
-
-
... More
OD41339/2024-2025
Supplying and fixing 2 nos of 2 M GI/PVC box with modular plate and cover in front
on surface or in
recess, including providing and fixing 25 A modular shuttered socket & 25 A
modular DP switch with
indicator, connection etc. as required.
57
-
-
... More
OD41340/2024-2025
Supply and providing 4U cabinet of approved make powder coated with glass panel
front door including
giving connection etc complete as required
1
-
-
... More
OD41341/2024-2025
Supply and fixing 20 W surface LED Panel light make philips , crompton, bajaj, or
equivalant reputed
brand and giving connection etc.
1
-
-
... More
OD41342/2024-2025
Supply, installation, testing and commissioning 72W LED Toplight government
approved make like Bajaj
or equivalent giving connections etc complete as required.
1
-
-
... More
1.17.31
Supplying and drawing following sizes of FRLS PVC insulated copper conductor,
single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x
6 sq. mm
300
-
-
... More
1.21.1
Supplying and fixing of following sizes of medium class PVC conduit along with
accessories in surface/ recess including cutting the wall and making good the same in
case of recessed conduit as required.20 mm
3500
-
-
... More
1.21.2
Supplying and fixing of following sizes of medium class PVC conduit along with
accessories in surface/ recess including cutting the wall and making good the same in
case of recessed conduit as required.25 mm
4500
-
-
... More
1.21.3
Supplying and fixing of following sizes of medium class PVC conduit along with
accessories in surface/ recess including cutting the wall and making good the same in
case of recessed conduit as required.32 mm
150
-
-
... More
90.11.1.16
Supply and installation of sheet steel, phosphatised and painted, dust and vermin
proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus
and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable
anchor bolts or fixed in recess including cutting hole on the wall , making good the
damages, colour washing etc. as required8 way (8+18) - double cover TPN vertical
DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/
TP MCB as outgoing (IP 42/43)
12
-
-
... More
90.11.1.19
Supply and installation of sheet steel, phosphatised and painted, dust and vermin
proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus
and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable
anchor bolts or fixed in recess including cutting hole on the wall , making good the
damages, colour washing etc. as required6 way (8+12) - double cover TPN vertical
DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP
42/43)
2
-
-
... More
90.11.1.21
Supply and installation of sheet steel, phosphatised and painted, dust and vermin
proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus
and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable
anchor bolts or fixed in recess including cutting hole on the wall , making good the
damages, colour washing etc. as required12 way (8+12) - double cover TPN vertical
DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP
42/43)
4
-
-
... More
2.3.4
Supplying and fixing following way, single pole and neutral, sheet steel, MCB
distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar,
neutral bus bar, earth bar, din bar, interconnections, powder painted including
earthing etc. as required. (But without MCBIRCCB/Isolator16 way, Double door
4
-
-
... More
90.11.1.10
Supply and installation of sheet steel, phosphatised and painted, dust and vermin
proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus
and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable
anchor bolts or fixed in recess including cutting hole on the wall , making good the
damages, colour washing etc. as required4 way (8+12) - three phase double cover (IP
42/43)
8
-
-
... More
90.11.1.11
Supply and installation of sheet steel, phosphatised and painted, dust and vermin
proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus
and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable
anchor bolts or fixed in recess including cutting hole on the wall , making good the
damages, colour washing etc. as required6 way (8+18) - three phase double cover (IP
42/43)
8
-
-
... More
90.11.1.12
Supply and installation of sheet steel, phosphatised and painted, dust and vermin
proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus
and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable
anchor bolts or fixed in recess including cutting hole on the wall , making good the
damages, colour washing etc. as required8 way (8+24) - three phase double cover (IP
42/43)
16
-
-
... More
90.16.1.4
Supply and drawing bare earthing conductors of the following sizes along with
wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG)
100
-
-
... More
OD41343/2024-2025
Supplying and fixing following size/ modules, GI box <br>1 or 2 Module
(75mmX75mm)
450
-
-
... More
OD41344/2024-2025
Supply, installation, testing and commissioning of Unshielded Twisted Pair Category
6 , 4 pair, 23 AWG solid copper conductor, 600 MHz, Cable Box of 305 Metre with
star filler and as per the technical
specifications
250
-
-
... More
OD41345/2024-2025
Supply and providing Cat 6 Input/Output Modular socket with plate on surface
400
-
-
... More
OD41346/2024-2025
Supply,installation,testing and commisioning of Network Switch 16 port switch 1000
mbps of approved
make,giving connections etc. complete as required
1
-
-
... More
OD41347/2024-2025
Supply,marking,crimping RJ45 connectors /sockets and fixing to the existing
enclosure and giving
connection etc complete
1
-
-
... More
90.16.5.4
Supply of superior quality copper earth socket for the following size of earth
conductor including crimping etc. as required.4.00 mm (8 SWG)
250
-
-
... More
2.3.1
Supplying and fixing following way, single pole and neutral, sheet steel, MCB
distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar,
neutral bus bar, earth bar, din bar, interconnections, powder painted including
earthing etc. as required. (But without MCBIRCCB/Isolator6 way, Double door
6
-
-
... More
OD41348/2024-2025
Supply ,installation ,testing and commissioning D-Link CAT6 24 port patchpanel
Loaded.make -D-Link or
equivalent
1
-
-
... More
OD41349/2024-2025
Supply ,installation ,testing and commissioing of Netrack 6U rack with shelf-1,
6socket /5A pdu-1, 20
hardware screws and closed type cable manager-1.make-Netrack/valrack/equivalent
1
-
-
... More
OD41350/2024-2025
Supply and fixing projector ceiling mounting kit 1.5 feet to 1.5 feet ,hight adjustable
1
-
-
... More
OD41351/2024-2025
Supply ,installation ,testing and commissioning of HDMI cable 20mtr make d-link or
equivalent
1
-
-
... More
OD41353/2024-2025
Supply and laying 1.5 Sqmm speaker cable make-finolex or equivalent
42
-
-
... More
OD41352/2024-2025
Supply ,installation ,testing and commissioing of CAT6 patch cord 1 mtr. make- dlink
or equivalent
5
-
-
... More
OD41354/2024-2025
Supply ,installation ,testing and commissioning of CAT6 patch cord 2 mtr. makedlink or equivalent
2
-
-
... More
OD41355/2024-2025
Supply and fixing of CAT6 I/O socket in the existing suitable modular plate and
suitable gi box ,giving
proper connection as required
400
-
-
... More
OD41356/2024-2025
Supply,installation,testing and commisioning of following port switch (10/100/1000
mbps) 24 Port
GIGABIT Desktop Switch D-Link/ TP-Link approved make,giving connections etc.
complete as required.
1
-
-
... More
OD41357/2024-2025
Supply and fixing of 400mm wall fan ,giving proper connection as required. makehavells or equivalent
2
-
-
... More
OD41358/2024-2025
Supplying and Fixing 150mm ventilating fan of approved brand.
60
-
-
... More
OD41359/2024-2025
Supply of 20W LED tube light fitting have 2000lumen with duly wired up for use on
230 V AC. The fittings
shall be directly on ceiling/ wall, including all accessories etc. as required. Make -
Philips or equivalent
200
-
-
... More
OD41360/2024-2025
Supply installation testing and LUKER 6W LED WALL LGT LODARCD0 or
equivalent
12
-
-
... More
OD41361/2024-2025
Supplying and fixing 40 A double pole mcb type change over switch make havells or
equivalent
10
-
-
... More
OD41369/2024-2025
Supply installation testing and commissioning of, stripe light driver make havells or
equivalent
10
-
-
... More
OD41372/2024-2025
Supply, installation testing and commissioning of6 W, stripe light make havells or
equivalent
50
-
-
... More
OD41373/2024-2025
Supplying and fixing 63A Triple pole, 415 V, isolator in the existing MCB DB
complete with connections,
testing and commissioning etc. as required
16
-
-
... More
2.3.2
Supplying and fixing following way, single pole and neutral, sheet steel, MCB
distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar,
neutral bus bar, earth bar, din bar, interconnections, powder painted including
earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door
2
-
-
... More
2.10.1
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve,
miniature circuit breaker suitable for inductive load of following poles in the existing
MCB DB complete with connections, testing and commissioning etc. as
required.Single pole
960
-
-
... More
2.10.4
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve,
miniature circuit breaker suitable for inductive load of following poles in the existing
MCB DB complete with connections, testing and commissioning etc. as
required.Triple pole
36
-
-
... More
2.10.5
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve,
miniature circuit breaker suitable for inductive load of following poles in the existing
MCB DB complete with connections, testing and commissioning etc. as
required.Triple pole and neutral
1
-
-
... More
2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete
etc. as required.
705
-
-
... More
2.12.1
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing
MCB DB complete with connections, testing and commissioning etc. as required.40
amps
6
-
-
... More
2.13.1
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing
MCB DB complete with connections, testing and commissioning etc. as required.40
amps
14
-
-
... More
2.13.2
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing
MCB DB complete with connections, testing and commissioning etc. as required.63
amps
12
-
-
... More
2.13.3
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing
MCB DB complete with connections, testing and commissioning etc. as required.100
amps
4
-
-
... More
2.14.1
Supplying and fixing following rating, double pole, (single phase and neutral), 240
volts, residual
current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in
the existing MCB DB complete with connections, testing and commissioning etc. as
required.25 amps
6
-
-
... More
2.14.2
Supplying and fixing following rating, double pole, (single phase and neutral), 240
volts, residual
current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in
the existing MCB DB complete with connections, testing and commissioning etc. as
required.40 amps
4
-
-
... More
2.14.3
Supplying and fixing following rating, double pole, (single phase and neutral), 240
volts, residual
current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in
the existing MCB DB complete with connections, testing and commissioning etc. as
required.63 amps
1
-
-
... More
OD41374/2024-2025
Supply, installation testing and commissioning of spotlight 12 w (
LHEEAXPBUG1W011 9 make havells),
New Prospot COB swivel . A beautifully designed accent light with a high efficiency
heat sink and crisp
light throw or equivalent
2
-
-
... More
2.15.1
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts,
residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in
the existing MCB DB complete with connections, testing and commissioning etc. as
required.25 amps
4
-
-
... More
2.15.2
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts,
residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in
the existing MCB DB complete with connections, testing and commissioning etc. as
required.40 amps
20
-
-
... More
2.15.3
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts,
residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in
the existing MCB DB complete with connections, testing and commissioning etc. as
required.63 amps
8
-
-
... More
90.12.1.13
Supply & laying of one number PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1KV grade of the following sizes in ground including
excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but
excluding sand cushioning and protective covering (in ordinary soil).3 core 6 sq mm
100
-
-
... More
90.12.1.14
Supply & laying of one number PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1KV grade of the following sizes in ground including
excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but
excluding sand cushioning and protective covering (in ordinary soil).3 core 10 sq mm
100
-
-
... More
90.12.1.15
Supply & laying of one number PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but
excluding sand cushioning and protective covering (in ordinary soil).3 core 16 sq mm
25
-
-
... More
90.12.1.27
Supply & laying of one number PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1KV grade of the following sizes in ground including
excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but
excluding sand cushioning and protective covering (in ordinary soil).3.5 core 25 sq
mm
25
-
-
... More
90.12.1.28
Supply & laying of one number PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1KV grade of the following sizes in ground including
excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but
excluding sand cushioning and protective covering (in ordinary soil).3.5 core 35 sq
mm
25
-
-
... More
90.12.1.29
Supply & laying of one number PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1KV grade of the following sizes in ground including
excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but
excluding sand cushioning and protective covering (in ordinary soil).3.5 core 50 sq
mm
25
-
-
... More
90.12.1.30
Supply & laying of one number PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1KV grade of the following sizes in ground including
excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but
excluding sand cushioning and protective covering (in ordinary soil).3.5 core 70 sq
mm
80
-
-
... More
90.12.1.31
Supply & laying of one number PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1KV grade of the following sizes in ground including
excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but
excluding sand cushioning and protective covering (in ordinary soil).3.5 core 95 sq
mm
50
-
-
... More
90.12.6.13
Supply & laying of one No. PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1 KV grade of the following sizes in the existing
masonry open duct as required.3 core 6 sq mm
20
-
-
... More
90.12.6.14 Supply & laying of one No. PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1 KV grade of the following sizes in the existing
masonry open duct as required.3 core 10 sq mm
100
-
-
... More
90.12.6.15
Supply & laying of one No. PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1 KV grade of the following sizes in the existing
masonry open duct as required.3 core 16 sq mm
50
-
-
... More
90.12.6.16
Supply & laying of one No. PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1 KV grade of the following sizes in the existing
masonry open duct as required.3 core 25 sq mm
25
-
-
... More
90.12.6.17
Supply & laying of one No. PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1 KV grade of the following sizes in the existing
masonry open duct as required.3 core 35 sq mm
20
-
-
... More
90.12.6.28
Supply & laying of one No. PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1 KV grade of the following sizes in the existing
masonry open duct as required.3.5 core 35 sq mm
50
-
-
... More
90.12.6.29
Supply & laying of one No. PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1 KV grade of the following sizes in the existing
masonry open duct as required.3.5 core 50 sq mm
25
-
-
... More
90.12.6.30
Supply & laying of one No. PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1 KV grade of the following sizes in the existing
masonry open duct as required.3.5 core 70 sq mm
180
-
-
... More
90.12.6.31
Supply & laying of one No. PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1 KV grade of the following sizes in the existing
masonry open duct as required.3.5 core 95 sq mm
25
-
-
... More
90.12.6.33
Supply & laying of one No. PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.3.5 core 150 sq mm
15
-
-
... More
90.12.6.34
Supply & laying of one No. PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1 KV grade of the following sizes in the existing
masonry open duct as required.3.5 core 185 sq mm
40
-
-
... More
90.12.7.13
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.3 core 6 sq mm with factory made clamp
5
-
-
... More
90.12.7.14
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.3 core 10 sq mm with factory made clamp
40
-
-
... More
90.12.7.15
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.3 core 16 sq mm with factory made clamp
22
-
-
... More
90.12.7.16
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.3 core 25 sq mm with factory made clamp
20
-
-
... More
90.12.7.17
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.3 core 35 sq mm with factory made clamp
20
-
-
... More
90.12.7.18
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.3 core 50 sq mm with factory made clamp
20
-
-
... More
90.12.7.19
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.3 core 70 sq mm
50
-
-
... More
90.12.7.37
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.3.5 core 400 sq mm
25
-
-
... More
90.12.5.37
Supply & laying of one number PVC insulated and PVC sheathed armoured
aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/
HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 400 sq mm
25
-
-
... More
90.12.7.20
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.3 core 95 sq mm
10
-
-
... More
90.12.7.22
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.3 core 150 sq mm
1
-
-
... More
90.12.7.31
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.3.5 core 95 sq mm
20
-
-
... More
90.12.7.32
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.3.5 core 120 sq mm
20
-
-
... More
90.12.7.33
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.3.5 core 150 sq mm
20
-
-
... More
90.12.7.34
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured
aluminium power cable, 1.1 KV grade of the following sizes using clamps noted
along with the cables, spacing of clamps not exceeding 60cms, making good the
damages , colour washing etc. as required.3.5 core 185 sq mm
20
-
-
... More
90.16.1.3
Supply and drawing bare earthing conductors of the following sizes along with
wiring/ cables and giving connection as required3.15 mm copper conductor ( 10
SWG)
15
-
-
... More
90.16.3.13
Supply and clamping the following size of strips on surface of wall/ parapet/ existing
cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty
GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages,
colour washing etc. as required ( for horizontal run)40 x 3 mm copper strip
25
-
-
... More
90.16.3.9
Supply and clamping the following size of strips on surface of wall/ parapet/ existing
cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty
GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages,
colour washing etc. as required ( for horizontal run)25 x 3 mm copper strip
25
-
-
... More
90.16.4.12
Supply and clamping the following sizes of strips on surface of wall / parapet/
existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or
heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the
damages, colour washing etc. as required ( for vertical run).40 x 3 mm copper strip
5
-
-
... More
OD41376/2024-2025
Supplying and fixing 40 A rating, 240/415 V.Triple pole MCB in the existing MCB
DB complete with
connections, testing and commissioning etc. as required.<br>Triple pole
22
-
-
... More
OD41377/2024-2025
Supply and fixing Power distribution unit 6socket
1
-
-
... More
OD41378/2024-2025
Supply and fixing Power distribution unit 4 socket.
1
-
-
... More
OD41381/2024-2025
APFC PANEL (140 KVAR)<br>Fabricated out of 16 SWG CRCA Sheet,top
and bottom<br>cable entry
for incoming and outgoing feeders.<br>Base frame<br>70 X 40 mm MS
Black Colour powder coated C
Chanel.<br>Bus bar<br>400 Amps TPN aluminium bus
bar<br>Earth Bus<br>25 x 3 mm Copper
Strip<br>Form of Construction<br>Form 3
A<br>Incomer:<br>400A TPN Isolator - 1 No.<br>Meters and
Indications<br>Cluster type RYB LED indication lamp - 1 Set.<br>O to
500 Volte meter with selector
switch - 1 No<br>O to 400 Amps Ammeter - 3 No<br>2Amps SP MCB -
6 Nos<br>400/5 Amps 10 VA
Class -1 PVC wounted CT - 3 Nos<br>Microprocessor based 6 stage APFC
relay-1 N o<br>Auto Manual
selector Switch--1 Nos<br>Out going : 1 - 1 Nos ( Direct )<br>16 Amps
TP Pole MCB - 1 No<br>20KVAR MPP Capacitor - 1No<br>Out going :
2,3,4 & 5 - 4 Nos<br>50 Amps TP Pole MCB - 1 No<br>SL
NO ITEM UNIT QTY RATE AMOUNT<br>Capacitor Bank: 25 kVAR MPP
Capacitor with
capacitor<br>duty contactor - 1 No.<br>Illuminated ON OFF push button set - 1 No<br>2 Amps SP MCB
- 3 Nos<br>Out going : 6 - 1 Nos<br>40 Amps TP Pole MCB - 1
No<br>Capacitor Bank: 15 kVAR MPP
Capacitor with capacitor<br>duty contactor - 1 No.<br>Illuminated ON
OFF push button set - 1 No<br>2
Amps SP MCB - 3 Nos<br>Out going : 7 - 1 Nos<br>10 Amps TP Pole
MCB - 1 No<br>Capacitor Bank:
5 kVAR MPP Capacitor with capacitor<br>duty contactor - 1
No.<br>Illuminated ON OFF push button set
- 1 No<br>2 Amps SP MCB - 3 Nos<br>Supply and Fabrication charges
1
-
-
... More
OD41382/2024-2025
Supply and fixing and commisioing of Greaves Power Genset Model GPWII-P-IV-
250C, 250 KVA/ 200
<br>KW Genset comprising of Greaves Engine model 6G11TAG41,
<br>Radiator Cooled, Turbo
Charged CRDI Engine developing 223 <br>KWm (303.4 HP) at 1500 R.P.M
close coupled to 3 Phase,
50 <br>Hz, 415 Volts, 0.8 PF, IP 23 Protection, Class H Insulation Mecc
<br>Alte or Equivalent make
Alternator with Integral Fuel Tank of <br>385 litres Capacity, Battery 12V /
180 AH, Standard Control
<br>Panel, Acoustic Enclosure as per CPCB IV+ norms and Sound
<br>level-75 dB(A) at one meter from
enclosure surface in free field <br>conditions as per ISO 8528.
<br>Canopied Generator Set Dimensions
(LxWxH)-4650 x <br>1700x2480 MM <br>Dry Weight of Genset-
(approx.) 3110 Kgs <br>Genset Rating:
Prime Rating as per ISO 8528 and Tolerances <br>as applicable
<br>Engine Conformance Standards:
BS 5514, ISO 3046 <br>Alternator Conformance Standard: IS 13364(I&
II) <br>Specific fuel consumption
depends on fuel density, load <br>available on DG set and power factor.
Tolerances for SFC will <br>be
as per ISO 3046 & ISO 8528 <br>Warranty is valid until a period of 66
<br>months from the date of
Invoice from Greaves Cotton Limited or 60 months from the <br>date of
commissioning or 5000 running
hours of operation whichever shall occurs first <br>subject to Greaves Cotton
Ltd, Standard Warranty Terms.
1
-
-
... More
90.16.4.8
Supply and clamping the following sizes of strips on surface of wall / parapet/
existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or
heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the
damages, colour washing etc. as required ( for vertical run).25 x 3 mm copper strip
25
-
-
... More
9.1.21
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.3 1/2X 35 sq. mm (32mm)
6
-
-
... More
9.1.22
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.3 1/2 X 50 sq. mm (35mm)
6
-
-
... More
9.1.23
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.3 1/2X 70 sq. mm (38mm)
12
-
-
... More
9.1.24
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.3 1/2X 95 sq. mm (45mm)
6
-
-
... More
9.1.25
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.3 1/2 X 120 sq. mm (45mm)
2
-
-
... More
9.1.27
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.3 1/2X 185 sq. mm (57mm)
Net Total 6.000set
6
-
-
... More
9.1.31 Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.3 1/2X 400 sq. mm (82mm)
2
-
-
... More
OD41383/2024-2025
Earthing with G.I. earth plate 1200 mm X 1200 mm X 6 mm thick including
accessories,
and<br>providing masonry enclosure with cover plate having locking
arrangement and watering pipe of
2.7 metre long etc. with charcoal/ coke and salt as required.
6
-
-
... More
OD41385/2024-2025
Supply and fixing Kirloskar 5 HP Three Phase MonoBlock Pump - KDI-538+ CI MS
SS IP55 FCL ,9-4
LPS, or equivalent
1
-
-
... More
OD41386/2024-2025
Supply and fixing Kirloskar 3 HP Three Phase MonoBlock Pump - KDI-325++ CI
MS SS IP55 FCL or
equivalent
1
-
-
... More
OD41388/2024-2025
Supply and laying10 swg bare copper conductors of the following size laid 0.6M
below ground level
including excavating trench of suitable size and refilling as required.
120
-
-
... More
OD41391/2024-2025
Providing and fixing 10 swg copper wire on surface or in recess for loop earthing
along with existing
surface/ recessed conduit/ submain wiring/ cable as required.
150
-
-
... More
9.1.7
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.3 X 10 sq. mm (22mm)
12
-
-
... More
9.1.8
Supplying and making end termination with brass compression gland and aluminium
lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.3 X 16 sq. mm (25mm)
2
-
-
... More
9.1.9
Supplying and making end termination with brass compression gland and aluminium
lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV
grade as required.3 X 25 sq. mm (25mm)
4
-
-
... More
5.3
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including
accessories, and providing masonry enclosure with cover plate having locking
arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and
salt ) as required.
4
-
-
... More
5.8
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip
earth electrode, including connection/ terminating with nut, bolt, spring, washer etc.
as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt
& spring washer spaced at 50mm)
20
-
-
... More
FIRE FIGHTING
-
-
-
... More
OD41153/2024-2025
Supply and fixing of CI Ball valves of size with both ends threaded inlet. 25 mm dia
5
-
-
... More
OD41445/2024-2025
Supply, installation, testing and commissioning of pressure gauge complete. Make:
Waree/National/Beumer or equivalent
2
-
-
... More
OD41446/2024-2025
Supply and fixing of ready made air cushion vessel imported type Make:
Wellmate/Ewave or equivalent
1
-
-
... More
OD41447/2024-2025
Supply Installation, testing and commissioning of Stand By Diesel Engine driven
pump with control panel and battery charger of centrifugal end suction type suitable
for automatic operation rated for 1620 LPM at 40 m head at high efficiency volute
type with cast iron casing,CI impeller Pump coupled to a diesel engine at 1800 RPM including supply of all accessories such as common base plate suitable foundation for
engine and pump, , suitable size Battery, coolant, lubricating oil, exhaust piping with
anti vibration pad Make: Kirloskar/ Crompton/ABB or equivalent
1
-
-
... More
OD41448/2024-2025
Supply, installation, testing and commissioning of Electrical driven Main of
discharge capacity 1620 LPM at 60m head coupled with squirrel cage, induction
motor, suitable HP with all the necessary accessories operating on 3Ph 50 Hz
400/440V AC supply with anti vibration pad.(Foundation required shall be done by
the civil contractor).Make: Kirloskar/ Crompton/ABB or equivalent
1
-
-
... More
OD41449/2024-2025
Supply, installation, testing and commissioning of Electrical driven monoblock
jockey pump 180 LPM at 60 m head of suitable HP with all the necessary accessories.
(Foundation required shall be done by the civil contractor) Make:
Kirloskar/Crompton or equivalent
1
-
-
... More
OD41450/2024-2025
Supply, installation, testing and commissioning of Electrical driven monoblock
terrace pump 900 LPM at 35 m head of suitable HP with all the necessary
accessories. (Foundation required shall be done by the civil contractor) Make:
Kirloskar/ Crompton/ABB or equivalent
1
-
-
... More
OD41452/2024-2025
Supply, installation, testing and commissioning of pressure switch complete. Make:
Danfoss/Indfoss/Beumer or equivalent
4
-
-
... More
OD41158/2024-2025
Supply, installation, testing and commissioning of gunmetal automatic Spring Loaded
Type air release valve 25 mm with necessary fittings. Make: Atam/Utam or
equivalent
2
-
-
... More
OD41159/2024-2025
Supply, installation, testing and commissioning of slim seal type cast iron butterfly
valves lever operated type with necessary flanges, nuts, rubber gaskets and bolts
complete. 80 mm dia Make: Kartar/CRI or equivalent
2
-
-
... More
OD41161/2024-2025
Supply, installation, testing and commissioning of slim seal type cast iron butterfly
valves lever operated type with necessary flanges, nuts, rubber gaskets and bolts complete. 100 mm dia Make: Kartar/CRI or equivalent
6
-
-
... More
OD41162/2024-2025
Supply, installation, testing and commissioning of slim seal type cast iron butterfly
valves lever operated type with necessary flanges, nuts, rubber gaskets and bolts
complete. 150 mm dia Make: Kartar/CRI or equivalent
1
-
-
... More
OD41163/2024-2025
Supply, installation, testing and commissioning of slim seal type cast iron non-return
valves with necessary flanges, nuts, bolts and rubber gaskets complete. 100 mm dia
Make: CRI/Kartar or equivalent
3
-
-
... More
OD41164/2024-2025
Supply, installation, testing and commissioning of slim seal type cast iron non-return
valves with necessary flanges, nuts, bolts and rubber gaskets complete. 80 mm dia
Make: CRI/Kartar or equivalent
1
-
-
... More
OD41165/2024-2025
Supply and fixing of cast iron Strainer of following sizes 150 mm dia
2
-
-
... More
OD41453/2024-2025
Fabrication, supply, Installation testing & commissioning of Electrical control
panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA
sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder
coated of approved shade after 7 tank treatment process, cable alley, interconnection
with suitable size copper conductor cable/solid copper strip, having switchgears and
accessories, mountings and internal wiring, earth terminals, numbering etc. complete
in all respect, suitable for main fire pump, pressurisation pump & diesel pump
set complete as per CPWD specification with following in coming and Outgoings,
suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection
class IP 42 as required :
1
-
-
... More
OD41166/2024-2025
Supply, erection, testing and commissioning of GI class pipes confirming to IS
1239. The pipe shall be anticorrosive wrapping treated. Wrapping material shall
consist of three layers of polymerized bitumen and one layer of polyesters. Wrapping
is applied over two coats of anti corrosive rubber modified bituminous primer. (under
ground piping) Make: TATA/Jindal or equivalent 100 mm Nominal bore.
18
-
-
... More
OD41167/2024-2025
Supply, erection, testing and commissioning of approved make medium quality GI
class pipes with branded malleable specials confirming to IS 1239 part 1& 2 such as tees, elbows, unions, flanges, nipples etc. including cutting, welding,
including a coat zinchromite primer and two coats of PO Red enamel paint etc.
(above ground piping) Make: TATA/Jindal or equivalent 25 mm Nominal bore.
3
-
-
... More
OD41168/2024-2025
Supply, erection, testing and commissioning of approved make medium quality GI
class pipes with branded malleable specials confirming to IS 1239 part 1&2
such as tees, elbows, unions, flanges, nipples etc. including cutting, welding,
including a coat zinchromite primer and two coats of PO Red enamel paint etc.
(above ground piping) Make: TATA/Jindal or equivalent 50 mm Nominal bore.
3
-
-
... More
OD41169/2024-2025
Supply, erection, testing and commissioning of approved make medium quality GI
class pipes with branded malleable specials confirming to IS 1239 part 1&;2
such as tees, elbows, unions, flanges, nipples etc. including cutting, welding,
including a coat zinchromite primer and two coats of PO Red enamel paint etc.
(above ground piping) Make: TATA/Jindal or equivalent 80 mm Nominal bore.
12
-
-
... More
OD41170/2024-2025
Supply, erection, testing and commissioning of approved make medium quality GI
& class pipes with branded malleable specials confirming to IS 1239 part
1&2 such as tees, elbows, unions, flanges, nipples etc. including cutting,
welding, including a coat zinchromite primer and two coats of PO Red enamel paint
etc. (above ground piping) Make: TATA/Jindal or equivalent 100 mm Nominal bore.
72
-
-
... More
OD41172/2024-2025
Supply, erection, testing and commissioning of approved make medium quality GI
class pipes with branded malleable specials confirming to IS 1239 part 1 & 2
such as tees, elbows, unions, flanges, nipples etc. including cutting, welding,
including a coat zinchromite primer and two coats of PO Red enamel paint etc.
(above ground piping) Make: TATA/Jindal or equivalent 150 mm Nominal bore.
12
-
-
... More
OD41174/2024-2025
Supply, erection, testing and commissioning of Three way fire brigade inlet with
three nos. of 63mm dia SS non- return valve connected to 100mm dia fire hydrant wet
riser pipe. Make - Newage / AAGG
1
-
-
... More
OD41178/2024-2025
Supply and fixing of hose box with double-hinged door with glass front arrangements
to accomadate two male & female hose with btanch pipe including PO red
painting. Make -Friends / capital Gains
4
-
-
... More
OD41180/2024-2025 Supply and fixing in position 63mm dia CP hose of 15mtrs in length heavy duty
aluminium male & female coupling etc, complete. Make - Newage / AAGG
8
-
-
... More
OD41182/2024-2025
Supply, installation, testing and commissioning of first aid rubber hose each of 30
mtrs length with nozzle wound on guided Hose reel drum fixed on swinging bracket
with standard accessories. Make: Monsher/Newage/Eversafe or equivalent
8
-
-
... More
OD41184/2024-2025
Supply and fixing in position of Aluminium short branch pipe of 63mm dia female
instantaneous inlet, male threaded outlet and hexagonal nozzle. Make:
Monsher/Newage/Eversafe or equivalent
4
-
-
... More
OD41185/2024-2025
Supply, installation, testing and commissioning of Single headed oblique type SS
hydrant valves with flanged inlet and 63mm dia female instantaneous outlet with ISI
mark. Make :Shabhogilal/Make: Monsher/Newage/Eversafe or equivalent
4
-
-
... More
OD41186/2024-2025
DIESEL ENGINE EXHAUST PIPE - Providing, laying of 75 mm thick mineral wool
insulation (150 Kg per cubic meter density) on diesel engine exhaust pipe and silencer
with chicken mesh wrapping and aluminum cladding with aluminum sheet of 26
SWG, complete as required and as per specification and IS equivalent 65mm Nominal
bore.
6
-
-
... More
OD41466/2024-2025
Supply and laying of 2X1.5 sqmm flexible copper armoured cable Make:
Finolex/Polycab/RR Kabel or equivalent
925
-
-
... More
OD41467/2024-2025
Supply, installation, testing and commissioning of smoke detectors MAKE -
SYSTEM SENOR / RAVEL
84
-
-
... More
OD41468/2024-2025
Supply, installation, testing and commissioning of manual call points / break glass
unit with hammer and chain. Make: Ravel/System sensor or equivalent
4
-
-
... More
OD41469/2024-2025
Supply, installation, testing and commissioning of dual tone electronic hooters.
Make: Ravel/System sensor or equivalent
4
-
-
... More
OD41470/2024-2025
Supply, installation, testing and commissioning of 8 ZONE microprocessor based fire
alarm main control panel with individual fire and fault audio- visual indication, test
and isolation facility with built in battery charger with fully assembled and wired.
Make: Ravel/System sensor or equivalen
1
-
-
... More
OD41567/2024-2025
od255782/2020_2021 : Supply, installation, testing and commissioning of Autoglow
sign boards with appropriate signs and directions, with photolumiscent material on 3
mm thick acrylic sheet, including all necessary fittings like EXIT,MCP,FIRE
DUCT,FIRE LIFT and others
30
-
-
... More
OD41571/2024-2025
od255783/2020_2021 : Supply, installation, testing and commissioning of LED
EXIT signage. ( UPS back up and cables for sign boards shall be provided from client
side).
5
-
-
... More
OD41573/2024-2025
Supply and fixing of Carbon-dioxide type fire extinguisher of 4.5Kg CO2 Type Fire
Extinguisher, Design, construction and testing as per IS 15683 with fire rating 21B.
operating temperature -30°C to +55°C, supplied with body
bearing IS 7285 mark and approved by CCoE tested at 250 kgf/cm2., fitted with ISI
marked & CCoE approved valve as per IS 3224. CO2 Gas as per IS:
15222. externally painted with PO Red Shade No. 538 of IS 5, Supplied with
standard accessories. Make : Safepro/ Palex/Safex or equivalent
2
-
-
... More
OD41574/2024-2025
Supply and fixing of 6 Kg ABC Dry Powder (Stored Pressure) Type Fire
Extinguisher. pressurized with dry nitrogen gas at 15 bar. Design, construction and
testing as per IS 15683 with Fire rating 1A 8B, Body Hydrotested at 35 bar,
Operating temperature -30°C to +55°C, external epoxy powder
coating with PO Red Shade No. 538 of IS 5, Supplied with standard accessories.
Make : Supremex/ Firestone /Safex or equivalent
8
-
-
... More
OD41575/2024-2025
Supply and fixing of 5 Kg MODULAR ABC Dry Powder (Stored Pressure) Type
Fire Extinguisher AT electrical Romm wall mounting with suitable supports and
fittings Make : Supremex/ Firestone /Safex or equivalent
1
-
-
... More
OD41576/2024-2025
Preparation of all drawings, submitting and getting approval from fire department,
submitting of completion certificates and arranging inspection, getting sanction, etc.
for commissioning of the whole installation in the premises.(All statutory payments
will be reimbursed with original receipts/Paid by client.)
1
-
-
... More
18.48
Providing and placing on terrace (at all floor levels) polyethylene water storage tank
:ISI 12701 marked, with cover and suitable locking arrangement and making
necessary holes for inlet, outlet and overflow pipes but without fittings and the base
support for tank.
5000
-
-
... More
Lighting Protection System
-
-
-
... More
OD41579/2024-2025
Providing and fixing of Cross-connectors Made of SS 252 8-10 V4A
18
-
-
... More
OD41580/2024-2025
Providing and fixing of expansion piece with connector: For
equalising<br>temperature related length
changes. Necessary on<br>conductors length over 20 meters. For round
conductor
Rd<br>8/ALU.<br>OBO Type No. 172 AR
4
-
-
... More
OD41581/2024-2025
Supply and fixing Connector: For T cross and parallel connectors.
Quick<br>installation using hexagonal
bolt M10X30 Made of SS.<br>Conforms to the requirements according to DIN
VDE 0185-<br>305 (ISIEC
62305)(2nos/expansion piece).<br>OBO Type No. 249 8-10 VA
18
-
-
... More
OD41582/2024-2025
Supply and laying of Copper bonded round conductor with 100
micron<br>copper bonding as per IEC
62305-3 with minimum area of<br>cross<br>section of 50 sq mm . RD
10-ST CU 100
200
-
-
... More
OD41583/2024-2025
Supply and fixing Fastening Clamp for 60mmX 25mm PVC conduit -<br>DC1
6025
9
-
-
... More
OD41584/2024-2025
Supply and fixing Universal clamp made of SS to connect rod with
flat&conductor .
4
-
-
... More
OD41585/2024-2025 Supply and providing of connector -To connect Cu bonded conductor<br>with
earth rod .OBO Type no :
5001 N-VA
12
12
-
-
... More
OD41586/2024-2025
Supply and filling Earth conductivity enhancing compound shall be of
12.5<br>kg/pit tested as per IEC
62561-7,TCLP tested.<br>OBO Type No. OEC 2 25
2
-
-
... More
OD41587/2024-2025
Supply and fixing Heavy duty<br>earth chamber of 5000kg load bearing
capacity to ensure<br>the safety
of earthing system .<br>OBO Type No.UFE
4
-
-
... More
OD41588/2024-2025
Supply and laying UL Listed & CPRI Tested maintenance free
,Low<br>carbon copper coated earth rod
of 3 metre electrode having<br>diameter of 14mm with copper coating
thickness of<br>250micron tested
as per IEC 62561-2 .<br>OBO Type No. 14 3000 CCER cost including
excavation charge
4
-
-
... More
OD41591/2024-2025
Supply and fixing of Vertical air terminal with accessories:Providing of& Air
terminals as per IS-IEC -
62305 part-3 16mm rod tapered<br>to 10 mm aluminium rod :<br>Meets
the technical specification
according to DIN EN 50164-<br>2 (VDE 0815 part 202).<br>Meets the
requirement of
VDE0185/305(IS/IEC 62305)<br>4Mtr Airterminal: semi-hard (E-AlMgSiO5
corresponds to<br>DIN
48801) Suitable for high wind load. OBO Type No. 101<br>VL4000
3
-
-
... More
OD41592/2024-2025
Supply and fixing Interception tip 120A
3
-
-
... More
OD41593/2024-2025
Supply and fixing Accessories : System consist of Fang Fix with base<br>and
clamp, on the top air
terminal is erected.<br>Fang fix clamp made of SS, lightning tested for 100
KA<br>10/350 micro sec
waveform. F-FIX-16
3
-
-
... More
OD41594/2024-2025
Supply and fixing Polyamide roof cable holder for flat roof: DIN 48829 Form
<br>B1. Closed form with
bottom. Filling weight 1Kg (frostresistant concrete). Sleeve from polyethylene, black
@ 1 <br>meter
distance. OBO Type No. 165 MBG-8-10
430
-
-
... More
OD41599/2024-2025
Supply and fixing 8 mm Aluminum Round Conductor complete
as<br>specified in drawing & Meets the
requirements of DIN EN <br>50164-2 (VDE 0185 part 202) & VDE 0185-
305 (IS/IEC 62305) <br>OBO
Type No. RD 8/ALU
330
-
-
... More
OD41601/2024-2025
Supply and fiing of Plastic Corrosion Protection strip: Approx 1.1 <br>mm
thick. Width 50mm. Made of
petrolatum- coated <br>chemical fibre fabric.OBO Type No.356 50
2
-
-
... More
OD41602/2024-2025
Supply and fixing of Test Joint Made of SS 252 8-10 V4A
6
-
-
... More
OD41604/2024-2025
Supply and fixing of 16 KG stone of 365 mm diameter, high level
of<br>stability Quick and easy mounting
of interception rod using<br>anchors.<br>Concrete, frost-resistant, can be
stacked Make: OBO
Article<br>Type No. F-FIX S16
3
-
-
... More
OD41605/2024-2025
Supply and fixing of PVC Conduit 60mmX 25mm - DU 6025
(3mtr<br>Length*3 Nos.) (Considered 1.5
mtr per drop)
9
-
-
... More
OD41606/2024-2025
Supply and fixing T160 Junction Box IP66 enclousre ,IK05,UV
resistants<br>190x150x77
6
-
-
... More
Panel Boards
-
-
-
... More
OD41607/2024-2025
SSB - AC Panel<br>Fabricated out of 16 SWG CRCA Sheet,top and bottom<br>cable entry for incoming
and outgoing feeders.<br>Base frame<br>70 X 40 mm MS Black Colour
powder coated C
Chanel.<br>Bus bar<br>160 Amps TPN aluminium bus
bar<br>Earth Bus<br>25 x 3 mm Copper
Strip<br>Form of Construction&Form 4 A<br>Meters and
Indications:-<br>Control wire - 1.5 Sq. mm
HFFR<br>CT wire - 2.5 Sq.mm HFFR colour coded.<br>Incomer
:<br>160A TPN Isolator -1No<br>Meters and
Indications&Cluster type RYB LED indication lamp - 1
Set.<br>2Amps SP MCB -
3 Nos<br>Out going : 1,2,3 & 4 - 4 Nos&;32 Amps 4 Pole MCB -
1 No<br>Out going : 5 & 6 - 2
Nos<br>32/40 Amps 4 Pole MCB - 1 No&;6o amp 4 pole 2 no ( Spare
provicion only )<br>Supply and
Fabrication charges
4
-
-
... More
OD41608/2024-2025
Common Panel<br>Fabricated out of 16 SWG CRCA Sheet,top and
bottom<br>cable entry for incoming
and outgoing feeders.<br>Base frame<br>70 X 40 mm MS Black Colour
powder coated C
Chanel.<br>Bus bar<br>100 Amps TPN aluminium bus
bar<br>Earth Bus<br>25 x 3 mm Copper
Strip<br>Form of Construction<br>Form 4 A<br>Meters and
Indications:-<br>Control wire - 1.5 Sq. mm
HFFR<br>CT wire - 2.5 Sq.mm HFFR colour coded.<br>SL NO ITEM
UNIT QTY RATE
AMOUNT<br>Incomer :<br>100A TPN Isolator -1No<br>Meters
and Indications<br>Cluster type RYB
LED indication lamp - 1 Set.<br>2Amps SP MCB -3 Nos<br>Out going :
1 - 1 Nos<br>16 Amps 4 Pole
MCB - 1 No<br>Out going : 2 - 1 Nos<br>63 Amps 4 Pole MCB - 1
No<br>Out going : 3 - 1 Nos<br>10
Amps 4 Pole MCB - 1 No<br>Out going : 4 & 5 - 2 Nos<br>25
Amps 4 Pole MCB - 1 No<br>Supply and
Fabrication charges
1
-
-
... More
OD41609/2024-2025
Supply installation testing and commissioning of 415 Volte<br>, 3Ph, TPN,Fully Compartmentalized CPRI Type tested IP<br>42/54/65 Switchboards made out of 2/1.6 mm thick sheet<br>steel duly powder coated after seven tank processing . All<br>ACBs/ MCCBs otherwise specified shall be 50 / 36kA,Icu<br>= Ics, Extra Current Limiting type Isolation duty for MSB<br>and with user Adjustable over load setting. (with external<br>setting knob) With fixed short circuit releases,rotary<br>operating mechanism with defeat switch for door interlock.All gaskets shall be high quality neoprene andall door<br>beeding shall be N - RACK make MFT - 007. Cubicle door<br>lock shall be quarter
turn type with allen keys. Any control<br>wiring used shall be with minimum 1.5 sq.mm PVC<br>insulated FRLS copper wiring with MCB protection.<br>Suitable feeder marking and identification shall be<br>provided. Design shall have all statutory approvals. KWH<br>meters & CTs shall be tested at CEIG approved test labs &<br>Test
certificates shall be furnished. All as per standard<br>specifications and as approved.Main Switch Board ( PLC Load sharing Panel )<br>Fabricated out of 16 SWG CRCA Sheet with top / bottom<br>cable entry for incoming and outgoing feeders.<br>Base frame<br>70 X 40 mm MSBlack Colour powder coated C Chanel.<br>Bus bar<br>630 Amps TPN aluminium busbar<br>Earth Bus<br>25 x 3 mm Copper Strip<br>Form of Construction<br>Form 4 A<br>Meters and Indications:-<br>Control wire - 1.5 Sq. mmHFFR<br>CT wire - 2.5 Sq.mm HFFR colour coded.<br>Incomer- 1 (From 400 KVA TFR)<br>630A 4Pole 50 KA Microprocessor based MCCB,<br>Isolation duty type with based 36kA MCCB<br>with spreader and handle -1 No.<br>160A 4P AC-1 duty type contactor -1No<br>Meters &Relays:<br>Multi function meter 96x 96 mm (MFM) having minimum
3<br>Windows displaying all major electrical parameters<br>including % THD, KWH complete with Load
manger,<br>Demand Controller &Communication Port - 1No<br>Cluster type RYB LED indication lamp - 1
Set.<br>MCCB On/of TripIndicating Lamp - 1No<br>125/ 5A ,10 VA ,Class-1 PVC wounted CT - 3
No<br>For multi function meter.;1set of DG START - STOP push button- 1Set<br>DG ON - OFF - TRIP LED Indicating<br>Lamps -1Set<br>2 Amps SP MCB - 6 Nos<br>Bus Coupler:<br>630 Amps 4 Pole Isolator - 1 No<br>630A 4P AC-1 duty type contactor -1No<br>Castel Key Interlocking<br>Castel Key Interlocking - Four locks with two key<br>AMF & Load Management Circuit<br>PLC based AMF logic with EB sensing, protection
for<br>under / over voltage, reverse power, under / over frequency,<br>unbalance, programmable start/stop timings,shall be<br>provided.<br>This AMF & Load Balancing System includes following<br>operational
features.<br>1) Manual Mode<br>2)Auto Mode<br>3) Semi Auto Mode<br>Provision for Transformer
& DG Selection depending<br>upon the load requirements.<br>1)DG-1<br>2) DG -2<br>3) DG -1 & DG -2<br>Suitable electrical and mechanical interlock shall be<br>provided between the DG , EB incomers
& Bus couplers to<br>ensure that only one supply is available at a time on each<br>section of bus and to
eliminate any possiblity of both<br>supplies at one bus section.<br>The panel shall have all neccesary Control
cables,<br>Instruments, Relays and accessories for the auto /manual<br>load sharing logic for 2 nos
DGSets and satisfactory<br>operation of AMF.<br>Neccesary provision
and control wirring shall be done
to<br>trip LT panel incomer on failure of 11kV HT
supply.<br>Outgoing:- 1 & 2 - 2 Set ( Spare provicion
only )<br>250/160 A TPN 36 KA Thermal magenetic based
MCCB<br>with spreader and handle -
1no.<br>Outgoing:- 3. - 1 Set<br>250 A TPN 36 KA Thermal magenetic
based MCCB with<br>spreader
and handle - 1no.<br>Outgoing:- 4 - 1 Set&160 A TPN 36 KA
Thermal magenetic based MCCB
with<br>spreader and handle - 1no.<br>Outgoing:- 5 - 1 Set<br>SL AMOUNT<br>400 A TPN 36 KA Thermal magenetic based MCCB
with&spreader and handle -
1no.<br>Outgoing:- 6 - 1 Set<br>125A TPN 36 KA Thermal magenetic
based MCCB with<br>spreader and handle - 1no.&Supply and Fabrication charges
spreader and handle -
1No<br>630A 4P AC-1 duty type contactor -1No<br>Meters &
RelaysMulti function meter 96 x 96 mm
(MFM) having minimum<br>3 Windows displaying all major electrical
parameters<br>including % THD,
KWH complete with Load manger,<br>Demand Controller &
Communication Port- 1No<br>Cluster type
RYB LED indication lamp - 1 Set.<br>MCCB On/Of Trip Indicating Lamp- 1
No<br>550/ 5A ,10 VA
,Class-1 PVC wounted CT - 3 No<br>For multi function meter.<br>550/
5A ,10 VA ,Class-1 PVC wounted
CT - 1 No<br>For APFC panel.<br>96 x 96 mm Digital Microprocessor
based IDMT Earth<br>Fault
Relay- 1 No<br>2 Amps SP MCB - 6 Nos<br>Incomer -2 From 250
KVA DG set ieDG#1<br>400A , 415V
, 4 pole Thermal magnetic based 36kA MCCB<br>with spreader and handle -1
No.<br>400A 4P AC-1
duty type contactor -1No<br>Meters & Relays:<br>Multi function
meter 96x 96 mm (MFM) having
minimum 3<br>Windows displaying all major electrical
parameters<br>including % THD, KWH complete
with Load manger,<br>Demand Controller & Communication Port -
1No<br>Cluster type RYB LED
indication lamp - 1 Set.<br>MCCB On/of Trip Indicating Lamp -
1No<br>350/ 5A ,10 VA ,Class-1 PVC
wounted CT - 3 No<br>For multi function meter.<br>1set of DG START
- STOP push button- 1
Set<br>DG ON - OFF - TRIP LED Indicating<br>Lamps -
1Set<br>2 Amps SP MCB - 6 Nos<br>Incomer
-3 From 82.5 KVA DG set ieDG#2<br>125A , 415V , 4 pole Thermal magnetic based 36kA
MCCB<br>with spreader and handle -1 No.<br>160A 4P AC-1 duty type
contactor -1No<br>Meters &
Relays:<br>Multi function meter 96x 96 mm (MFM) having minimum
3<br>Windows displaying all major
electrical parameters<br>including % THD, KWH complete with Load
manger,<br>Demand Controller &
Communication Port - 1No<br>Cluster type RYB LED indication lamp - 1
Set.<br>MCCB On/of Trip
Indicating Lamp - 1No<br>125/ 5A ,10 VA ,Class-1 PVC wounted CT - 3
No<br>For multi function
meter.<br>SL NO ITEM UNIT QTY RATE AMOUNT<br>1set of DG
START - STOP push button- 1
Set<br>DG ON - OFF - TRIP LED Indicating<br>Lamps -
1Set<br>2 Amps SP MCB - 6 Nos<br>Bus
Coupler:<br>630 Amps 4 Pole Isolator - 1 No<br>630A 4P AC-1 duty
type contactor -1No<br>Castel Key
Interlocking<br>Castel Key Interlocking - Four locks with two
key<br>AMF & Load Management
Circuit<br>PLC based AMF logic with EB sensing, protection
for<br>under / over voltage, reverse power,
under / over frequency,<br>unbalance, programmable start/stop timings,shall
be<br>provided.<br>This
AMF & Load Balancing System includes following<br>operational
features.<br>1) Manual Mode<br>2)
Auto Mode<br>3) Semi Auto Mode<br>Provision for Transformer
& DG Selection depending<br>upon the load requirements.<br>1)
DG-1<br>2) DG -2<br>3) DG -1 & DG -2<br>Suitable
electrical and
mechanical interlock shall be<br>provided between the DG , EB incomers
& Bus couplers to<br>ensure
that only one supply is available at a time on each<br>section of bus and to
eliminate any possiblity of
both<br>supplies at one bus section.<br>The panel shall have all
neccesary Control
cables,<br>Instruments, Relays and accessories for the auto /
manual<br>load sharing logic for 2 nos
DGSets and satisfactory<br>operation of AMF.<br>Neccesary provision
and control wirring shall be done
to<br>trip LT panel incomer on failure of 11kV HT
supply.<br>Outgoing:- 1 & 2 - 2 Set ( Spare provicion
only )<br>250/160 A TPN 36 KA Thermal magenetic based
MCCB<br>with spreader and handle -
1no.<br>Outgoing:- 3. - 1 Set<br>250 A TPN 36 KA Thermal magenetic based MCCB with<br>spreader
and handle - 1no.<br>Outgoing:- 4 - 1 Set<br>160 A TPN 36 KA
Thermal magenetic based MCCB
with<br>spreader and handle - 1no.<br>Outgoing:- 5 - 1 Set<br>SL
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements