Kerala Land Development Corporation Limited Tender

od375763/2022_2023 : Charges for erecting the 10 H.P. motor pumpset over the foundation block in correct lines and levells including all lift and leads of pumpset and setting the allignment for trouble free operation.

od395564/2022_2023 : Supplying, conveyance and installation of 100 mm dia cast iron heavy duty flanged type non return valve in delivery line with leak proof condition using rubber packing, bolts and nuts ets as directed at sight

od395565/2022_2023 : Supplying, conveyance and installation of 100 mm dia double flanged sluice valve of rating PN 1:6 in delivery line with leak proof condition using rubber packing, bolts and nuts ets as directed at sight

od395566/2022_2023 : Providing, laying testing and commissioning of 100 mm dia medium class GI pipe with required flanges including making akk joints in leak proof using rubber packing and MS bolt and nuts painting the pipe line with 2 coats of synthethic enamel paint over a coat of red oxide primer

od395567/2022_2023 : Supplying and providing 16 mm submarine blue make polypropelyne rope for hanging the motor pump

90.14.5 : Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

14.7 : Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

14.12 : Providing 15mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand) at all levels.

90.14.1.2 : Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.br Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.

90.14.2.1 : Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

90.14.3.3 : Supply and providing heavy duty 'A' section neoprene gasket in the panel board

2.1.2 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & N

90.14.24.19 : Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.

2.15.3 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

od394263/2022_2023 : Supply & fixing Red, Green, Black, Yellow, Orange colours LED indicator, AC/DC, 22.5 mm cut out dia in the existing panel board and giving connection

od394264/2022_2023 : Supply & fixing Blue colour LED indicator, AC/DC, 22.5 mm cut out dia in the existing panel board and giving connection

od375734/2022_2023 : Supply and providing 0.5A to 2A SP MCB and giving connection etc as required

od394262/2022_2023 : Supplying and fixing Danger 415 V, 200 x150 mm aluminium anodised legend plates

90.6.10.2 : Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required

90.6.10.3 : Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required

1.17.1 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.1 x 1.5 sq. mm

1.17.31 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 6 sq. mm

90.6.4.54 : Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

90.6.6.4 : Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.

90.12.24.3 : Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.

90.12.24.4 : Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.

5.1 : Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required.

od394260/2022_2023 : Supply and provding test joint for earthing system using 2 nos of the following strips including cutting and bending to shape<br>,drilling necessary holes and fixing to the watering pipe etc as required .<br>2x25x6mm GI strip

90.16.1.3 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required

90.16.1.4 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required

90.16.5.3 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.

90.16.5.4 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.

od394248/2022_2023 : Supplying and providing 25x6 mm brass bolt and nut with washer on the existing MS box/earth bus etc as required including drilling necessary holes as required

od394249/2022_2023 : Supplying and providing 12x3 mm brass bolt and nut with washer on the existing MS box/earth bus etc as required including drilling necessary holes as required

90.16.2.1 : Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.15.mm dia. G.I pipe ( medium class)

90.16.3.9 : Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)

od375769/2022_2023 : Fabrication, supply & installation of dust and vermin proof, wall mounting, Hot press moulded SMC Meter Boxbox of following sizes suitable for fixing KSEB meter, fuse units, CT etc, hinged door construction for the front side with compartments if necessary, providing vision panel for the meter compartment, knock out for cable entry and exit.<br>GS-MB -7450 (inside 700x480x200mm)

od375751/2022_2023 : Fabrication, supply & installation of dust and vermin proof, wall mounting, Hot press moulded SMC Meter Boxbox of following sizes suitable for fixing KSEB meter, fuse units, CT etc, hinged door construction for the front side with compartments if necessary, providing vision panel for the meter compartment, knock out for cable entry and exit.<br>63 A HRC fuseBase with HRC fuse link

od375752/2022_2023 : Fabrication, supply & installation of dust and vermin proof, wall mounting, Hot press moulded SMC Meter Boxbox of following sizes suitable for fixing KSEB meter, fuse units, CT etc, hinged door construction for the front side with compartments if necessary, providing vision panel for the meter compartment, knock out for cable entry and exit.<br>63 A, 415 V, 2 way neutral link mounted on DMC/ SMC base.

od394242/2022_2023 : Supplying and providing 2.0 mm thick 3.3 KV , Synthetic elastrometric fire retardant insulating sheet in front of main

od394243/2022_2023 : Prepering completion and test report for KSEB connection