Kerala Irrigation Infrastructure Development Corporation Limited Tender
... More
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Kerala Irrigation Infrastructure Development Corporation Limited - KIIDC Tender
Eprocure
Opening Date25 Nov 2019
Closing Date16 Dec 2019
Tender Amount₹ 59,75,90,154
Costs
EMD
₹ 5,00,000Document Cost
₹ 16,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_KIIDC_324167_1Bid Award Id
ViewTender No
KIIDC / Tender / 258 / 2019-20Tender Authority
Kerala Irrigation Infrastructure Development Corporation Limited ViewPurchaser Address
-Website
http://http://kiidc.kerala.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
od135549/2019_2020 : Bailing out water Using 5HP Pump- Bailing out water with 5HP engine and pump set including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete
5760
-
-
... More
od161042/2019_2020 : Bailing out water using pump above 5 HP and Up to 10 HP-Bailing out water with engine and pump set above 5HP and up to 10HP, including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete
2880
-
-
... More
od135553/2019_2020 : Bailing out water using pump above 10 HP and up to 20 HP -Bailing out water with engine and pump set above 10 hp and up to 20hp ,including conveyance to site and erection, cost of fuel ,lubrication oil and other stores,pay of staff etc complete.<br>
1440
-
-
... More
od135565/2019_2020 : Bailing out water using pump above 30 HP and up to 40 HP -Bailing out water with engine and pump set above 30 hp and up to 40hp ,including conveyance to site and erection, cost of fuel ,lubrication oil and other stores,pay of staff etc complete.
240
-
-
... More
od137777/2019_2020 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means<br>over areas exceeding 30 cm in depth, including disposal of excavated earth, with all lead and lift, disposed<br>earth to be levelled and neatly dressed and as directed by Engineer in charge.All kinds of soil<br>
23315.363
-
-
... More
12.22 : Providing Steel Liner 10mm thick for Curbs and 6 mm thick for Steining of Wells including Fabricating and Setting out as per Detailed Drawing.
72.41
-
-
... More
od135568/2019_2020 : Bored cast-in-situ M30 grade R.C.C. Pile excluding Reinforcement complete as per Drawing and Technical Specifications and removal of excavated earth with all lifts and lead upto 1000 m.Using Concrete Mixer - Pile diameter-1200 mm - as per 12.25.6 MORTH specification
1088
-
-
... More
od135570/2019_2020 : Integrity testing of pile using low strain / sonic intergrity test/sonic eco test method in accordance with IS 14893 including surface preparation of pile top by removing soil,mud, dust and chipping lean concrete lumps etc and use of computerised equipment and high skill trained personal for conducting the test and submission of results,all complete as per direction of engineering in charge
136
-
-
... More
12.39 : Providing and laying of PCC M15 leveling course 100 mm thick below the pile cap
57.198
-
-
... More
12.8.2.C.1 : Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications RCC Grade M20 With Batching Plant, Transit Mixer and Concrete Pump
4466.405
-
-
... More
12.38.B.2 : Cement Concrete for Reinforced Concrete in Pile Cap complete as per Drawing and Technical Specificationbr
R C C Grade M-25 - Using Batching Plant, Transit Mixer and Concrete Pump br
1306.261
-
-
... More
13.5.F.P.2 : Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications RCC Grade M25 - With Batching Plant, Transit Mixer and Concrete Pump - Height upto 5m
766.448
-
-
... More
13.5.F.q.2 : Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications RCC Grade M25 - With Batching Plant, Transit Mixer and Concrete Pump - Height 5m to 10m
752.561
-
-
... More
14.1A.2.2.B : Furnishing and Placing Reinforced Cement Concrete Grade M20 Using Batching Plant, Transit Mixer and Concrete Pump as per drawing and Technical Specification.For T-beam & slab - Height 5m to 10m
807.6
-
-
... More
12.40 : Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications
724.49
-
-
... More
13.6 : Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications
265.827
-
-
... More
od135576/2019_2020 : Construction of RCC railing of M20 Grade in-situ with 20 mm nominal size aggregate, true<br>to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, center to center<br>spacing between vertical post not to exceed 2000 mm, leaving adequate space between<br>vertical post for expansion, complete as per approved drawings and technical<br>specifications.
316.8
-
-
... More
14.2 : Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications
145.368
-
-
... More
14.4 : Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications.
98.501
-
-
... More
13.10 : Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification.
92.4
-
-
... More
od135582/2019_2020 : Providing & making Gabion structure with Mechanically Woven Double Twisted<br>Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2012,MORTH Clause<br>2500, of required size, Mesh Type 10x12(D=100 mm with tolerance of ± 2%) Zinic+PVC<br>coated, Mesh wire diameter2.7/3.7mm, mechanically edged/selvedged with partitions<br>at every 1m interval and shall have minimum 10 numbers of openings per meter of<br>mesh perpendicular to twist, tying with lacing wire of diameter 2.2/3.2mm(ID/OD),<br>supplied @3% by weight of Gabion boxes, filled with boulders with least dimension<br>of 200 mm, as per drawing, all complete as per directions of Engineer-in-charge.
2808
-
-
... More
od135583/2019_2020 : Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation (14.22)<br>
143.65
-
-
... More
13.14 : Supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to IRC: 83 (Part-II) section IX and clause 2005 of MoRTH specifications complete including all accessories as per drawing and Technical Specifications.
490752
-
-
... More
od135586/2019_2020 : Providing Z steel sheet pile of size 400x185x7.5/8.5 driving down vertically in lines and levels interlocking with adjacent piles with suitable pile driving unit and all accessories including all labour hire charges etc. complete and as per the directions of departmental officers at site.
2576
-
-
... More
od147345/2019_2020 : PVC WEEP HOLES- Providing weep holes using 75mm dia. PVC pipes working pressure 4kg /sq.cm including cost of materials, conveyance, labour charges etc. complete.
108
-
-
... More
od135588/2019_2020 : Cathodic protection to sheet piles including all cost, conveyance etc. complete<br>
309.12
-
-
... More
14.16 : Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm.
6989.04
-
-
... More
Appendix B- Side Protection Works of river
-
-
-
... More
2.3.1.B : Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thicknessbr In area of thorny jungle -By Manual Meansbr
3
-
-
... More
od137777/2019_2020 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means<br>over areas exceeding 30 cm in depth, including disposal of excavated earth, with all lead and lift, disposed<br>earth to be levelled and neatly dressed and as directed by Engineer in charge.All kinds of soil<br>
62250
-
-
... More
od150570/2019_2020 : RING BUND Type II Putting up ring bund with earth fille gunny bags of top width 1.0m bottom width 2.0m height 2.0 m side and filling in between with earth to form ring bund and maintaining the same leak proof till the completion of the work and clearing the site by dismantling the bund after completion of the work.etc.complete.
1520
-
-
... More
od135549/2019_2020 : Bailing out water Using 5HP Pump- Bailing out water with 5HP engine and pump set including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete
2560
-
-
... More
od149988/2019_2020 : Bailing out water using pump above 5 HP and Up to 10 HP-Bailing out water with engine and pump set above 5HP and up to 10HP, including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete
960
-
-
... More
od154747/2019_2020 : Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications<br>PCC Grade M10 specification as per 12.8.A MORTH specification
645
-
-
... More
12.8.2.C.1 : Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications RCC Grade M20 With Batching Plant, Transit Mixer and Concrete Pump
4920
-
-
... More
13.5.E.p.2 : Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications RCC Grade M20 - With Batching Plant, Transit Mixer and Concrete Pump - Height upto 5m
4780.98
-
-
... More
12.40 : Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications
885.6
-
-
... More
13.6 : Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications
860.577
-
-
... More
od147345/2019_2020 : PVC WEEP HOLES- Providing weep holes using 75mm dia. PVC pipes working pressure 4kg /sq.cm including cost of materials, conveyance, labour charges etc. complete.
600
-
-
... More
Appendix C Construction of Head Regulator and Side Protecion of Thodu
-
-
-
... More
2.3.1.B : Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thicknessbr In area of thorny jungle -By Manual Meansbr
0.13
-
-
... More
od150570/2019_2020 : RING BUND Type II Putting up ring bund with earth fille gunny bags of top width 1.0m bottom width 2.0m height 2.0 m side and filling in between with earth to form ring bund and maintaining the same leak proof till the completion of the work and clearing the site by dismantling the bund after completion of the work.etc.complete.
40
-
-
... More
od149988/2019_2020 : Bailing out water using pump above 5 HP and Up to 10 HP-Bailing out water with engine and pump set above 5HP and up to 10HP, including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete
800
-
-
... More
od137777/2019_2020 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means<br>over areas exceeding 30 cm in depth, including disposal of excavated earth, with all lead and lift, disposed<br>earth to be levelled and neatly dressed and as directed by Engineer in charge.All kinds of soil<br>
7151.614
-
-
... More
od150571/2019_2020 : Bored cast-in-situ M25 grade R.C.C. Pile excluding Reinforcement complete as per Drawing and Technical Specifications and removal of excavated earth with all lifts and lead upto 1000 m. <br>Using Concrete Mixer - Pile diameter-600 mm as per 55.17.4 MORTH OD
240
-
-
... More
12.22 : Providing Steel Liner 10mm thick for Curbs and 6 mm thick for Steining of Wells including Fabricating and Setting out as per Detailed Drawing.
4.5
-
-
... More
12.39 : Providing and laying of PCC M15 leveling course 100 mm thick below the pile cap
6.239
-
-
... More
12.38.B.2 : Cement Concrete for Reinforced Concrete in Pile Cap complete as per Drawing and Technical Specificationbr
R C C Grade M-25 - Using Batching Plant, Transit Mixer and Concrete Pump br
78.084
-
-
... More
12.8.E.2.1 : Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M25 - With Batching Plant, Transit Mixer and Concrete Pump
66.912
-
-
... More
12.8.2.C.1 : Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications RCC Grade M20 With Batching Plant, Transit Mixer and Concrete Pump
144.526
-
-
... More
12.40 : Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications
34.047
-
-
... More
13.5.F.P.2 : Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications RCC Grade M25 - With Batching Plant, Transit Mixer and Concrete Pump - Height upto 5m
163.961
-
-
... More
13.5.F.q.2 : Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications RCC Grade M25 - With Batching Plant, Transit Mixer and Concrete Pump - Height 5m to 10m
21.24
-
-
... More
13.6 : Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications
92.617
-
-
... More
od135582/2019_2020 : Providing & making Gabion structure with Mechanically Woven Double Twisted<br>Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2012,MORTH Clause<br>2500, of required size, Mesh Type 10x12(D=100 mm with tolerance of ± 2%) Zinic+PVC<br>coated, Mesh wire diameter2.7/3.7mm, mechanically edged/selvedged with partitions<br>at every 1m interval and shall have minimum 10 numbers of openings per meter of<br>mesh perpendicular to twist, tying with lacing wire of diameter 2.2/3.2mm(ID/OD),<br>supplied @3% by weight of Gabion boxes, filled with boulders with least dimension<br>of 200 mm, as per drawing, all complete as per directions of Engineer-in-charge.
45
-
-
... More
od154747/2019_2020 : Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications<br>PCC Grade M10 specification as per 12.8.A MORTH specification
264
-
-
... More
od165381/2019_2020 : Plain Cement Concrete 1:3:6 ( 1 cement : 3 Course sand: 6 graded stone aggregate 40mm metal size) nominal mix in sub structure , mechanically mixed, placed in sub structure and compacted by vibration including curing for 14 days etc. complete as per specification.
1040
-
-
... More
od147345/2019_2020 : PVC WEEP HOLES- Providing weep holes using 75mm dia. PVC pipes working pressure 4kg /sq.cm including cost of materials, conveyance, labour charges etc. complete.
288
-
-
... More
14.16 : Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm.
199.06
-
-
... More
Appendix D Approah Road and Bank Connection
-
-
-
... More
2.3.1.B : Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thicknessbr In area of thorny jungle -By Manual Meansbr
0.098
-
-
... More
od137777/2019_2020 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means<br>over areas exceeding 30 cm in depth, including disposal of excavated earth, with all lead and lift, disposed<br>earth to be levelled and neatly dressed and as directed by Engineer in charge.All kinds of soil<br>
4040
-
-
... More
12.8.A.1 : Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M15
931
-
-
... More
13.5.A : Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications PCC Grade M15 - Height upto 5m
2436.75
-
-
... More
12.40 : Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications
37.24
-
-
... More
13.6 : Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications
97.47
-
-
... More
od147345/2019_2020 : PVC WEEP HOLES- Providing weep holes using 75mm dia. PVC pipes working pressure 4kg /sq.cm including cost of materials, conveyance, labour charges etc. complete.
180
-
-
... More
3.17 : Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2.
3249
-
-
... More
Appendix E Approach Road -MORTH
-
-
-
... More
3.15 : Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with in all lifts and lead upto 1000 metres by Mechanical Means br
95
-
-
... More
4.1.A.1 : Construction of granular sub-base by providing graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 br Grading-I - Plant Mix Method
324.9
-
-
... More
4.12 : Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.
324.9
-
-
... More
5.1.a : Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means.
1045
-
-
... More
5.2.a : Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.
1045
-
-
... More
5.3.2.a : Providing and laying bituminous macadam with 80-100 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder (VG 30), transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction.br
For Grading II - (19 mm nominal size)br
52.25
-
-
... More
5.6.2.a : Providing and laying bituminous concrete with 80-100 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder( NRMB) @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects
Grading - II (13.2 mm Nominal Size)br
31.35
-
-
... More
8.13 : Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads on Bituminous Surface @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.
28.5
-
-
... More
8.5 : Providing and fixing of direction and place identification retro-reflectorised sign with 7 years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with area not exceeding 0.9 sqm, with suitable back supporting frame of MS angle 40x40x6 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc.
2.16
-
-
... More
Appendix F Electrical (Generator) Building
-
-
-
... More
2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
53.134
-
-
... More
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
9.347
-
-
... More
5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size
17.146
-
-
... More
5.2.2 : Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
5.962
-
-
... More
5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15sup0/sup landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
44.303
-
-
... More
5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
17.24
-
-
... More
5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
154.265
-
-
... More
5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
214.239
-
-
... More
5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
88.129
-
-
... More
5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
10111.65
-
-
... More
50.6.7.1 : Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc.
6.748
-
-
... More
50.6.7.2 : Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc.
45.811
-
-
... More
50.9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood
0.981
-
-
... More
50.9.2.1 : Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin - charge.using Anjili/ Jack wood
9.225
-
-
... More
50.9.6.1 : Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood / jack wood 30 mm thick shutters
18.626
-
-
... More
9.48.2 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc
408.503
-
-
... More
9.120.1 : Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and sized of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of whicj 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5mm thick, 95 mm wide PVC sheet out of which75 mm shall be tapered in 45 degree on th inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mmx2) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded /sealed to the styles & rails with 7 mm (5 mm + 2 mm ) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer -in-charge, manufacture's specification & drawing.30 mm thick plain PVC door shutters
3.075
-
-
... More
13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
611.771
-
-
... More
5.23 : Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 ( cement : 3 fine sand).
194.236
-
-
... More
11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
23.281
-
-
... More
11.37 : Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.
134.925
-
-
... More
9.55.2 : Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc, complete:100x58x1.90mm.
110
-
-
... More
9.63.1 : Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete:250x10 mm
10
-
-
... More
9.66.2 : Providing and fixing ISI marked oxidised M.S. handles conforming to IS : 4992 with necessary screws etc. complete:100 mm
2
-
-
... More
13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
806.006
-
-
... More
13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
806.007
-
-
... More
13.48.2 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture
44.753
-
-
... More
13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
23.687
-
-
... More
17.3.1 : Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
2
-
-
... More
17.7.3 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps
2
-
-
... More
50.18.7.2.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall
50
-
-
... More
50.18.7.4.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall
50
-
-
... More
50.18.9.22.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend
15
-
-
... More
18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
1000
-
-
... More
Appendix G Electrical Works
-
-
-
... More
90.14.1.2 : Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.br
Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.
26
-
-
... More
90.14.4 : Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)
12
-
-
... More
90.14.6 : Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.
7000
-
-
... More
90.14.7 : Supply and providing copper earth bus in the panel board
1100
-
-
... More
90.14.2.1 : Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.
2
-
-
... More
90.14.3.1 : Supply and providing heavy duty 'A' section neoprene gasket in the panel board
40
-
-
... More
od136031/2019_2020 : Supply and installation of digital multi function meter (V,A,F) in the existing panel board and giving connection
2
-
-
... More
od136050/2019_2020 : Supply and installation of LED indicator (R,Y,B) in the existing panel board and giving connection
12
-
-
... More
od136061/2019_2020 : Supply and fixing 100/5A, 5VA , resin cast metering CT of 0.5 class accuracy.
6
-
-
... More
od152099/2019_2020 : Supply and fixing 2A 'C' curve SPMCB in the existing panel board and giving connection.
12
-
-
... More
90.14.10.11 : Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.
4
-
-
... More
90.14.10.3 : Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.
3
-
-
... More
2.10.5 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole and neutral
12
-
-
... More
90.14.11.17 : MCCB Accessories
2
-
-
... More
90.14.11.13 : MCCB Accessories
7
-
-
... More
90.14.11.2 : MCCB Accessories
1
-
-
... More
90.14.11.5 : MCCB Accessories
1
-
-
... More
90.11.1.10 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required
1
-
-
... More
2.13.2 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps
1
-
-
... More
2.15.3 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps
1
-
-
... More
2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
12
-
-
... More
90.12.41.33 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.
1200
-
-
... More
90.12.7.28 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.
15
-
-
... More
90.12.41.23 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.
5
-
-
... More
9.1.21 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm)
4
-
-
... More
9.1.23 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm)
2
-
-
... More
9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)
30
-
-
... More
4.1.2 : Supplying and installing following size of perforated pre-painted M.S. cable trays with
perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.150 mm width X 50 mm depth X 1.6 mm thickness
75
-
-
... More
4.1.4 : Supplying and installing following size of perforated pre-painted M.S. cable trays with
perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.300 mm width X 50 mm depth X 1.6 mm thickness
75
-
-
... More
5.3 : Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as required.
5
-
-
... More
5.13 : Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.
75
-
-
... More
5.17 : Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing asrequired.
200
-
-
... More
5.15 : Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
300
-
-
... More
1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC conduit,
with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS
PVC insulated copper conductor single core cable etc as required.Group C
5
-
-
... More
1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire
10
-
-
... More
1.31 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or inrecess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 ampsmodular switch, connection etc. as required. (For light plugs to be used in non residentialbuildings).
1
-
-
... More
1.32 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
1
-
-
... More
1.12 : Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single corecable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulatedcopper conductor single core cable for loop earthing as required.
10
-
-
... More
90.3.19.3 : Supply conveyance, installation, testing and commissioning the light fittings of following types made from CRCA sheet 0.5mm thickness with all accessories and lamps directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required
5
-
-
... More
90.15.3.1 : Supply installation testing commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70mm top diameter, 130mm bottom diameter thickness 3mm base plate dimensions of 200x200x12mm suitable for wind speed as per IS 875 Part III single arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junctions box etc.complete 5 Meters
12
-
-
... More
90.15.3.5 : Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70 mm top diameter, 130 mm bottom diameter thickness 3mm base plate dimensions of 200x200x12 mm suitable for wind speed as per IS 875 Part III single arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc. complete 7 Meters
16
-
-
... More
90.15.4.2 : Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)
12
-
-
... More
od160112/2019_2020 : Supply, installation, testing and commissioning of Solar LED lighting System with following accessories. (a) luminaire :- 1No 45W LED IP 65 street light luminaire with epoxy powder coated pressure die cast alu. housing with weather proof gasket and heat resistant toughened glass cover, 100ah lithium battery, 250W solar panel, battery box, charge controller with auto switch built in for dusk to dawn operation having protection against short circuit & lightning with mounting bracket suitable to fix on tubular pole
16
-
-
... More
od160113/2019_2020 : Supply and fixing 100A TPN SDF in sheet steel enclosure on wall using suitable steel fastners.
1
-
-
... More
od160213/2019_2020 : 100A HRC fuse fuse base with fuse link<br>
3
-
-
... More
od160229/2019_2020 : 100 A, 415 V, 2 way neutral link mounted on DMC/ SMC base.
1
-
-
... More
od160246/2019_2020 : Supply & installation of dust and vermin proof, 3 Phase Syntex Meter Board GS-MB-6535(size 760x450x260x) and to fix KSEB meters, fuse units, CT etc as required including fixing it on wall, making good the damages colour washing etc. as required.
1
-
-
... More
od161047/2019_2020 : Supply, conveyance, installation, testing and commissioning of 40KVA/32KW D.G. set incorporating "CUMINS" Model X3.TAA-G2 Diesel Engine developing 56BHP at 1500rpm, Water cooled, 4cylinders, Coupled, ALternator rated at 32kw/40KVA, 415V, 50Hz, 0.8 P, mounted on a chanel iron base frame complete with fuel tank, Battery, Manuel control panel and other standard accessories with suitable CPCB approved factory assembled Acoustic enclosure. <br>
1
-
-
... More
od161049/2019_2020 : Supply and providing following sizes of 'B' Class MS pipe with specials and flanged coupling in each full length of pipe, as additional exhaust piping, fixing the same firmly to the builing / structure using necessary supports, such angle iron, MS clamp etc., painting the pipe and accessories with synthetic enamel paint over a coat of zinc chromate primer etc. as required. 100 mm dia or nearest size 'B' Class MS pipe
5
-
-
... More
od161050/2019_2020 : Supply and providing 9 Litre capacity GI Fire Bucket painted in post office red with primer coat of red oxide and written with white paint 'FIRE' mounted on MS angle frame work/ wall bracket filled with fine sand, painting the bracket/ floor stand including making good the damages, colour washing etc. as required
2
-
-
... More
od165395/2019_2020 : Supply and providing 2.5mm thick, 11KV grade, synthetic elastometric fire retardant insulating sheet
6
-
-
... More
od165396/2019_2020 : Supply and providing 5 Kg. Dry Chemical Powder type Fire Extinguisher with hose and clamps including fixing it to wall as required
2
-
-
... More
od165397/2019_2020 : Supply of 11KV electrical gloves (Vidyut)
2
-
-
... More
od165398/2019_2020 : Supply of Bosch professional tool kit (GSB550)
1
-
-
... More
Appendix - H Mechanical works - PART A-Regular gates
-
-
-
... More
85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges
25410.522
-
-
... More
85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges
7368.103
-
-
... More
85.107 : Supply of MS round bar including cost of conveyance charges
1486.592
-
-
... More
od150585/2019_2020 : Supply of MS Bolts and Nuts
948.803
-
-
... More
85.108 : Fabrication, erection and commissioning of Structural steel Embedded parts in IS2062 Grade and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour , machinery , incidental and handling charges etc complete but excluding cost of material already supplied
34265.217
-
-
... More
od150589/2019_2020 : Fabrication, supply, erection and assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track, seal track, seal seat etc as per approved specifications, drawings and directions of deptl officer at site including cost of all materials, labour, machinery for planing, welding, shearing, grinding etc, lead and lift, conveyance, incidental and handling etc complete<br>Rate analysis SS Embedded parts 2.6Qtl
4007.389
-
-
... More
H1 -Supply of materials, fabrication, painting and erection of 12 No of MS shutter.
-
-
-
... More
85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges
116679.691
-
-
... More
85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges
4417.455
-
-
... More
od150593/2019_2020 : Cost of MS Bolts & Nuts
643.424
-
-
... More
od150595/2019_2020 : Supply and stacking of dia 8 mm SS-304 chain, including cost of materials, <br>conveyance etc. complete<br>
48
-
-
... More
85.110 : Fabrication and supply of Structural steel wheel gate and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied
121131.764
-
-
... More
85.112 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350microns over the grit blasted and cleaned surface to class A standard of IS 14177 including cost of all materials , labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc complete as per the direction of departmental officer at site
3068.994
-
-
... More
85.111 : Erection of the gates safely in the grooves , assembling and aligning including cost of all machinery, labour all incidental and conveyance charges etc complete as per direction of departmental officer at site
121775.188
-
-
... More
H2 - Supplying and fixing of rubber seals
-
-
-
... More
85.116 : Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing
133.761
-
-
... More
85.118 : Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings
87.744
-
-
... More
H3 -Supplying and fixing of roller assembly
-
-
-
... More
od151718/2019_2020 : Supplying and fixing cast steel thrust roller assembly having 300mm Dia, 90mm tread width, SS(304) shaft and 22220E self aligning spherical roller bearing and accessories as per approved specifications and drawings including cost of all materials, machineries, labour, all lift and lead, incidental and conveyance charges etc complete
48
-
-
... More
H4 Supply of materials, fabrication, painting and erection of hoisting bridge, covers and frames of driving units and rope drum for shutter
-
-
-
... More
85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges
69531.483
-
-
... More
85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges
29086.781
-
-
... More
85.103 : Supply of MS checquered plates including cost of conveyance charges
18416.538
-
-
... More
od153259/2019_2020 : Supply of NB 32mm GI pipe
373.628
-
-
... More
od153275/2019_2020 : Supply of MS Bolts and Nuts
461.876
-
-
... More
85.107 : Supply of MS round bar including cost of conveyance charges
831.397
-
-
... More
85.124 : Fabrication and supply of Hoisting bridge unit in structural steel confirming to IS2062Gr including ladder, covers for hoisting unit etc as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, incidental and handling charges for fixing handrails and allied works etc complete but excluding material already supplied and weight of pipes for hand rails etc
117731.445
-
-
... More
od153968/2019_2020 : Painting all the exposed surfaces 2 coats of enamel paint over 1 coat of zinchromate<br>primer as per IS 1477:1994 over the grit blasted and cleaned surface to class A standard of IS 14177<br> including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, <br>hire of T&P etc as per the direction of departmental officer at site.<br>Enamel paint with grit blasting
3562.243
-
-
... More
85.136 : Erection of the hoisting bridge unit including handrails , ladder and platform etc. in correct alignment and anchoring it ; setting and aligning the covers of the hoisting unit etc complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied
118821.36
-
-
... More
H5 - Supplying, stacking, erecting and trial run of rope drum hoisting unit
-
-
-
... More
85.128 : Providing Line shaft ,material : MS rolled/ forged steel
1762.758
-
-
... More
od156965/2019_2020 : Cost of supplying and stacking 20mm tested galvanised steel wire rope 6/36<br>construction, fibre core having breaking capacity 23853Kg tensile designation of 1770 confirming to IS2266-2002
140
-
-
... More
od157167/2019_2020 : Cost of supplying and stacking 18mm, 6/36 construction, right hand lay ungalvanised main fibre core wire rope <br> having UTS 180Kg/mm2 breaking load capacity 19266 Kg confirming to IS2266-1989
1100
-
-
... More
od157388/2019_2020 : Supplying and stacking of 15 Tonne capacity rope drum hoisting unit having 8 m lift at a hoisting speed of about 0.4 m/min(+/-10%) through pulley arrangements with two numbers of falls on either side with 20mm tested ungalvanized wire rope 6/36 construction, fibre core having breaking capacity 26402 kg and driven by TEFC squirrel cage induction motor hoist duty type having capacity not less than 3HP and driven through self locking worm reducer and open gear reduction unit excluding the cost of line shaft, including cost of electro magnetic thruster brake assembly manual operating systems, electrical accessories like DOL starters, limit switch, main switches and other safety equipments as per drawings specifications and statutory requirements etc complete but excluding cost of wire rope.
2
-
-
... More
od157443/2019_2020 : Supplying and stacking of 20 Tonne capacity rope drum hoisting unit having 8m lift at a hoisting speed of about 0.4 m/min(+/-10%) through pulley arrangements with 4 numbers of falls on either side with 20mm tested ungalvanized wire rope 6/36 construction, fibre core having breaking capacity 23853Kg and driven by TEFC squirrel cage induction motor hoist duty type having capacity not less than 5Hp and driven through self locking worm reducer and open gear reduction unit excluding the cost of but including cost electro magnetic thruster brake assembly manual operating systems, electrical accessories like DOL starters, limit switch, main switches and other safety equipments as per drawings specifications and statutory requirements etc complete but excluding cost of wire rope
10
-
-
... More
od157473/2019_2020 : Providing DIAL ASSEMBLY
12
-
-
... More
od157485/2019_2020 : Supply of Plummer Block SNA 512 TC to suit for 60mm dia Line shaft with 1212 K<br>Bearing + H312 adapter sleeve
44
-
-
... More
85.125 : Conveying and erecting in position the already supplied rope drum hoisting units (15T/ 20T/25T/30T) capacity on the hoisting bridge and correcting the alignment as far as possible manually as per the direction of departmental officer at site including cost of all labour, machinery, lead and lift and all incidental and conveyance charges etc complete
12
-
-
... More
85.135 : Conveying and Fixing wire rope already supplied to the new gates and Hoisting unit safely and conducting Trial run
12
-
-
... More
H6- PART-B Head Regulator Shutter
-
-
-
... More
85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges
596.744
-
-
... More
85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges
1702.528
-
-
... More
85.107 : Supply of MS round bar including cost of conveyance charges
218.136
-
-
... More
od157629/2019_2020 : Cost of MS Bolts and Nuts
158.844
-
-
... More
85.108 : Fabrication, erection and commissioning of Structural steel Embedded parts in IS2062 Grade and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour , machinery , incidental and handling charges etc complete but excluding cost of material already supplied
2517.408
-
-
... More
od157781/2019_2020 : Fabrication, supply, erection and assembling in correct position and alignment by welding SS embedded parts in 304L Grade like roller track, seal track, seal seat etc as per approved specifications, drawings and directions of deptl officer at site including cost of all materials, labour, machinery for planting, welding, shearing, grinding etc, lead and lift, conveyance, incidental ana handling etc complete
594.081
-
-
... More
H7- Supply, Fabrication, Painting, Erection of Head Regulator Shutter
-
-
-
... More
85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges
4923.161
-
-
... More
85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges
2033.401
-
-
... More
85.110 : Fabrication and supply of Structural steel wheel gate and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied
6956.562
-
-
... More
85.119 : Supplying and fixing cast steel thrust roller assembly having 250mm Dia, 50mm tread width, SS(304) shaft and 22313E self aligning spherical roller bearing and accessories as per approved specifications and drawings including cost of all materials, machineries, labour , all lift and lead, incidental and conveyance charges etc complete
8
-
-
... More
85.112 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350microns over the grit blasted and cleaned surface to class A standard of IS 14177 including cost of all materials , labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc complete as per the direction of departmental officer at site
168.765
-
-
... More
85.111 : Erection of the gates safely in the grooves , assembling and aligning including cost of all machinery, labour all incidental and conveyance charges etc complete as per direction of departmental officer at site
6956.562
-
-
... More
H8- Fixing of Rubber Seal
-
-
-
... More
85.116 : Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing
9.2
-
-
... More
85.118 : Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings
16
-
-
... More
H9- Supply, Fabrication, Painting and Erection of Hoisting bridge.
-
-
-
... More
85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges
6030.412
-
-
... More
85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges
4784.471
-
-
... More
85.103 : Supply of MS checquered plates including cost of conveyance charges
2532.167
-
-
... More
od158852/2019_2020 : Supply of NB 32mm GI pipe
91.94
-
-
... More
od158853/2019_2020 : Cost of MS Bolts and Nuts
49.306
-
-
... More
85.124 : Fabrication and supply of Hoisting bridge unit in structural steel confirming to IS2062Gr including ladder, covers for hoisting unit etc as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, incidental and handling charges for fixing handrails and allied works etc complete but excluding material already supplied and weight of pipes for hand rails etc
13347.05
-
-
... More
85.115 : Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site
447.264
-
-
... More
od158860/2019_2020 : Supplying and stacking of 15 Tonne capacity rope drum hoisting unit having 8 m lift at a hoisting speed of about 0.40 m/min(+/-10%) through pulley arrangements with two numbers of falls on either side with 20mm tested ungalvanized wire rope 6/36 construction, fibre core having breaking capacity 26402Kg and driven by TEFC squirrel cage induction motor hoist duty type having capacity not bless than 3HP and driven through self locking worm reducer and open gear reduction unit excluding the cost of line shaft, including cost of electro magnetic thruster brake assembly manual operating systems, electrical accessories like DOL starters, limit switch, main switches and other safety equipments as per drawings specifications and statutory requirements etc complete but excluding cost of wire rope.
2
-
-
... More
od158861/2019_2020 : Cost of supplying and stacking 20mm, 6/36 construction, right hand lay ungalvanised main fibre core wire rope <br> having UTS 180Kg/mm2 breaking load capacity 23853 Kg confirming to IS2266-1989
80
-
-
... More
85.128 : Providing Line shaft ,material : MS rolled/ forged steel
66.097
-
-
... More
85.136 : Erection of the hoisting bridge unit including handrails , ladder and platform etc. in correct alignment and anchoring it ; setting and aligning the covers of the hoisting unit etc complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied
13498.751
-
-
... More
85.125 : Conveying and erecting in position the already supplied rope drum hoisting units (15T/ 20T/25T/30T) capacity on the hoisting bridge and correcting the alignment as far as possible manually as per the direction of departmental officer at site including cost of all labour, machinery, lead and lift and all incidental and conveyance charges etc complete
2
-
-
... More
85.135 : Conveying and Fixing wire rope already supplied to the new gates and Hoisting unit safely and conducting Trial run
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements