Kerala Industrial Infrastructure Development Corporation Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 1,00,000Document Cost
₹ 8,850Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_KINFR_470224_1Bid Award Id
ViewTender No
KINFRA/RPI/32/2021-22Tender Authority
Kerala Industrial Infrastructure Development Corporation ViewPurchaser Address
-Website
http://http://kinfra.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
2.32 : Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
1250
-
-
2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
163.73
-
-
2.9.1 : Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Ordinary rock
5.02
-
-
od115449/2021_2022 : Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth,for all leads and lifts within the site as per site requirement and direction of engineer in charge, disposed earth to be levelled and neatly dressed.All kinds of soil
3226.4
-
-
od114236/2021_2022 : Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth,for all leads and lifts within the site as per site requirement and direction of engineer in charge, disposed earth to be levelled and neatly dressed. Ordinary rock
2144.61
-
-
2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil
667.95
-
-
2.26.2 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.Ordinary or hard rock
445.3
-
-
2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
543.68
-
-
Concrete Works
-
-
-
4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
17.36
-
-
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
101.14
-
-
RCC Works
-
-
-
5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
247.4
-
-
5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
1472.59
-
-
5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
150.46
-
-
5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
48.2
-
-
5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
27.36
-
-
5.9.16.1 : Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide
336.92
-
-
5.9.19 : Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges
12.56
-
-
5.12 : Providing, hoisting and fixing up to floor level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) : 3 graded stone aggregate 20 mm nominal size)
5.59
-
-
5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
50458.17
-
-
5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
2359.75
-
-
od113403/2021_2022 : Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. (Note: - Minimum Cement content considered in this item is @ 340 kg/cum. Additional cement requirement as per mix design shall be considered by the bidder while quoting, nothing extra shall be paid on this account).All work upto plinth level.
370.68
-
-
od116788/2021_2022 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. (Note :- Minimum Cement content considered in this item is @ 330 kg/cum. Additional cement requirement as per mix design shall be considered by the bidder while quoting, nothing extra shall be paid on this account) All work upto plinth level
30.22
-
-
od114312/2021_2022 : Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. (Note: - Minimum Cement content considered in this item is @ 340 kg/cum. Additional cement requirement as per mix design shall be considered by the bidder while quoting, nothing extra shall be paid on this account).All work above plinth level upto floor V level.
12.95
-
-
od102683/2021_2022 : Extra for Centering and shuttering for Circular Works - including strutting, etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
14.48
-
-
od102697/2021_2022 : Extra for Centering and shuttering for Circular Works - including strutting, etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform
16.54
-
-
od83431/2021_2022 : Extra for circular shuttering : Centering and shuttering including strutting, etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
178.17
-
-
Masonry Works
-
-
-
7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)
29.25
-
-
50.6.1.4 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
6.52
-
-
50.6.1.5 : Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
8.16
-
-
50.6.3.1 : Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth for 10 cm thick wall in CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding etc complete
63.29
-
-
50.6.3.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete
1.73
-
-
Joinery Works
-
-
-
21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
54.68
-
-
21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)
54.68
-
-
21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness
12.15
-
-
21.15.2 : Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary necessary screws etc. complete.Powder coated minimum thickness 50 micron aluminium
18
-
-
Steel Works
-
-
-
10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
9098.62
-
-
10.6.1 : Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover
5.28
-
-
10.7 : Providing and fixing ball bearing for rolling shutters.
2
-
-
10.9 : Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer -in-Charges, (area of grill to be measured).
1.32
-
-
10.16.3 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Electric resistance or induction butt welded tubes
1625.19
-
-
10.19 : Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
95.76
-
-
10.25.1 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete
633.88
-
-
10.25.2 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
1194.61
-
-
10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
61.44
-
-
Roofing Works
-
-
-
od102234/2021_2022 : Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
68.8
-
-
50.12.2.1 : Providing & fixing Poly carbonate corrugated sheet 0.8 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling / self tapping screw of size (5.5x55 mm) with EPDM seal complete upto any pitch in horizontal/ vertical/ curved surface, but excluding the cost of purlins, rafters, trusses, and including cutting to size shapes where ever required.
236.84
-
-
od114378/2021_2022 : Providing and fixing ridge/ valley capping/flashing in required width (upto maximum 600 mm) with plain galvalume colour coated sheet made out of 0.50mm TCT, minimum 300 MPa cold rolled steel with hot dip metallic coating of Aluminium Zinc alloy (Galvalume) 150 gms/sqm,total of both sides, AZ 150 as per ASTM A 792 or AS1397, with polyester colour coating including cost and conveyance of all materials, scaffolding, lead,lift, labour charges, all taxes etc. complete at all levels as directed by Engineer-in-Charge
46.8
-
-
Flooring Works
-
-
-
11.4 : 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete
33.3
-
-
16.68 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
2574.9
-
-
16.69 : Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge)
3.75
-
-
16.78.2 : Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBRValue-25
23
-
-
16.79 : Providing , laying spreading and compacting graded stone aggregate ( size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub - base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer - in- Charge.
23
-
-
16.83 : Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
100
-
-
16.84 : Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost.)
100
-
-
16.91.2 : Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
115
-
-
11.6.1 : Cement plaster askirting upto 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement .18 mm thick
3.03
-
-
Finishing works
-
-
-
13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
1201.96
-
-
13.7.1 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)
1587.27
-
-
13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
55.76
-
-
13.33.1 : Pointing on stone work with cement mortar 1:3 ( 1 cement : 3 fine sand):Flush/ Ruled pointing
22.5
-
-
13.41.1 : Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade:New work ( Two or more coats) over and including priming coat with water thinnable cement primer
67.39
-
-
13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
1176.82
-
-
13.44.1 : Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)
1178.98
-
-
13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
334.55
-
-
Miscellaneous Works
-
-
-
16.15.1 : Supplying at site:R.C.C. Standards post / struts / rails / pales of mix 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 12.5 mm nominal size ) with wooden plugs or 6 mm bar nibs wherever required as per direction of Engineer-in-Charge (cost of earth works in excavation, concrete works in foundation to be paid separately)
4.49
-
-
16.17.1 : Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with G.I staples on wooden plugs or G.I binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately):- Payment to be made per metre cost of total length of barbed wire used .With G.I barbed wire
2940
-
-
19.18.3 : Supplying and fixing C.I with out frame for manholes:560 mm diameter ( heavy duty) the weight of the cover to be not less than 108 kg
2
-
-
22.4.1 : Providing and Placing in position suitable PVC water stops conforming to IS : 12200 for construction / expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete:Serrated with central bulb ( 225 mm wide, 8-11 mm thick)
779.1
-
-
50.18.9.9.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2
80
-
-
od101670/2021_2022 : Providing and applying Antitermite treatment by injecting chemical emulsion Imidacloprid emulsiable concentrate .075% for pre-constructional treatment and creating a chemical barrier as per IS 6313 (Part II) 2001 for wall trenches, foundation, top surface of plinth filling, foundation of wall and floor, along the external perimeter of the building, etc. complete conforming to manufacturers specification and as directed by the Engineer-in-Charge. (Plinth area only to be measured for the payment )
34.56
-
-
od103842/2021_2022 : Supplying, filling, spreading & leveling stone aggregate of size 40mm, in proposed, in the required thickness, for all leads & lifts, all complete as per direction of Engineer -in- charges
11.85
-
-
od103844/2021_2022 : Providing and laying of 20mm downgraded metal (Coarse rubble granite Stone) of approved quality as filter media around the drainage pipes in the sides of trench as per the directions of Engineer-in-charge. Rate inclusive of all materials,transportation and labour charges complete.The work has to be executed as per detailed specifications , and or as approved by Engineer -in -charge
24.23
-
-
od116718/2021_2022 : Supplying and laying coarse sand (2-4mm) for filter media. The rate inclusive of cost and conveyance of all materials, labour charges etc complete all as per detailed specifications and directions of the Engineer in charge at all levels.
18.23
-
-
od116765/2021_2022 : Supplying and laying Fine sand (0.5-2mm) for filter media. The rate inclusive of cost and conveyance of all materials, labour charges etc complete all as per detailed specifications and directions of the Engineer in charge at all levels.
18.34
-
-
od117796/2021_2022 : Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.: 300 mm dia RCC pipes.
6
-
-
Mechanical
-
-
-
od25325/2021_2022 : Supplying and fixing of screen of SS304 construction using SS sheet of 2mm thick with 5mm opening size ,detachable type with handle, frame, bracings ,suitable for placing inside a bar screen chamber of size 6.45m x 1.9m x 1.3m
2
-
-
od25326/2021_2022 : Supplying and fixing of screen of SS304 construction using SS sheet of 2mm thick with 10mm opening size ,detachable type with handle, frame, bracings ,suitable for placing inside a bar screen chamber of size 6.45 m x 1.9 m x 1.3 m
2
-
-
od25327/2021_2022 : Supplying and fixing of clarifier rake mechanism for primary clarifier of 6m dia and 2 m SWD complete with central bridge, walkway with ladder, handrails etc of MS construction with epoxy painting, rake mechanism including rake arm, scrapper blade, cone scrapper, feed well of 1m dia and 1.4m depth etc. in SS construction, central shaft with MS construction, base plate, central heavy duty bearing, 1.5 HP motor assembly and, 2 nos. gear boxes and all other accessories complete.
1
-
-
od25328/2021_2022 : Supplyingandfixing of clarifier rake mechanism for secondary clarifier of 6m dia and 2 m SWD complete with central bridge, walk way with ladder, handrails etc of MS construction with epoxy painting, rake mechanism including rake arm, scrapper blade, cone scrapper, feed well of 1m dia and 1.4m depth etc. in SS construction, central shaft with MS construction, base plate, central heavy duty bearing, 1.5 HP motor assembly and 2 nos. gear boxes and all other accessories complete.
1
-
-
od25329/2021_2022 : Supplyingandfixing of clarifierrake mechanism for tertiary clarifier of 4m dia and 2 m SWD complete with central bridge, walk way withladder, handrails etc of MS construction with epoxy painting, rake mechanism including rake arm, scrapper blade, cone scrapper, feed well of 1m dia and 1.4 m depth etc. in SS construction, central shaft with MS construction, base plate, central heavy duty bearing, 1HP motor assembly and 2 nos. gear boxes and all other accessories complete.
1
-
-
od25341/2021_2022 : Supply and fixing Flash mixer chamber with leg supports, 5mm thick MS construction inside and outside 3mm FRP lining, size 1.5m x 1.5m x 1.5m (including free board) complete with 1 HP motor, gear box assembly, platform for placing pump and gear, SS 304 shaft, agitator, operating platform, ladder including all accessories.
2
-
-
od25342/2021_2022 : Supply and fixing Flocculator chamber with leg supports, 5mm thick MS construction inside and outside 3mm FRP lining, size 1.7m x 1.7m x 1.8m(including free board), additional conical bottom, complete with 1HP motor, gear box assembly, platform for placing pump and gear, SS 304 shaft, agitator operating platform, ladder including all accessories
2
-
-
od25343/2021_2022 : Supplying and placing in position of chemical feed tank of size 5m x 1m x 1m (ht) and 6mm thick, FRP construction with 5 compartments each having 1000 lit. capacity complete with common stirrer of SS construction, 1 HP motor with 1440 rpm, gearbox and all other accessories.
1
-
-
od25344/2021_2022 : Supplying and fixing of electronic dosing pump with all wetted parts in PP construction suitable for pumping HOCl solution including cost of valve, suction and delivery lines using heavy duty PVC tubes, LDPE/HDPE tank of min 100 litres capacity, FRP motor cover etc. and complete with all accessories : capacity 0-6LPH @3.5Kg/cm2
2
-
-
od25345/2021_2022 : Supply and erection of pressure sand filter of size 1.2m dia x 1.875 m HOS, (approx.) vertical type pressure vessel, mild steel internally FRP lined construction, externally epoxy coated, 8mm shell thickness,10mm dish thickness, flanged top and bottom, operating pressure of 3.5 Kg/cm2, complete with CI valves and graded pebble and sand as media, frontal piping, pressure gauges, strainers , supporting structure including ladder, back wash arrangement, etc and all other accessories, Flow rate:12.5m3/hr
1
-
-
od25346/2021_2022 : Supply and erection of activated carbon filter 1.2 m dia x 1.875 m HOS, (approx.) vertical type pressure vessel, mild steel internally FRP lined construction, externally epoxy coated, 8 mm shell thickness, 10mm dish thickness, flanged top and bottom, operating pressure of 3.5 kg/cm2 complete with CI valves, internals, frontal piping, filter media including activated carbon, pressure gauges, strainers, supportingstructures including ladder,backwash arrangement, sampling valves, etc. complete, Flow rate:12.5m3/hr
1
-
-
od25347/2021_2022 : Supplying, fixing and commissioning of Twin lobe air blower for indoor application complete with air filter, motor of 1500 rpm with starter in suitable enclosure ,pressure gauges, pressure relief valve, acoustic hood, suction silencer with suitable flanges, common motor and compressor base frame with motor including all accessories complete as per technical specification : Capacity:600m3/hr ,Pressure: 0.4 kg/cm2
2
-
-
od25348/2021_2022 : Effluent Transfer Pump : Supplying and fixing of self priming, non clog centrifugal pump for rated continuous duty and efficiency, CIconstruction, bronze impeller, mechanical seal complete with 3phase motor, FRP motor cover, pressure gauge, suitable for operation on 415+/-10%volts, 50HZ,A C power supply etc. complete in all respects as required by the standard specifications complete with all accessories as per technical specification Capacity: 12.5 m3/hr, Head: 12m
2
-
-
od25349/2021_2022 : Intermediate Pump : Supplying and fixing of self priming, non clog centrifugal pump for rated continuous duty and efficiency, CIconstruction, bronze impeller, mechanical seal complete with 3phase motor, FRP motor cover, pressure gauge, suitable for operation on 415+/-10%volts, 50HZ,A C power supply etc. complete in all respects as required by the standard specifications complete with all accessories as per technical specification ,Capacity: 12.5 m3/hr, Head: 12m
2
-
-
od25350/2021_2022 : Filter Feed Pump :Supplying and fixing of centrifugal pump of CI construction, CI impeller, mechanical seal complete with 3phase motor, FRP motor cover, pressure gauge, suitable for operation on 415+/-10%volts, 50HZ,A C power supply etc. complete in all respects as required by the standard specifications complete with all accessories as per technical specification Capacity: 12.5 m3/hr, Head: 35 m
2
-
-
od25351/2021_2022 : Back Wash Pump : Supplying and fixing of centrifugal pump of CI construction, CI impeller, mechanical seal complete with 3phase motor, FRP motor cover, pressure gauge, suitable for operation on 415+/-10%volts,50HZ,AC power supply etc. complete in all respects as required by the standard specifications complete with all accessories as per technical specification Capacity : 25 m3/hr, Head : 12 m
2
-
-
od25352/2021_2022 : Sludge Recirculation Pump : Supplying and fixing of self priming, non clog centrifugal pump for rated continuous duty and efficiency, CIconstruction, bronze impeller, complete with 3phase motor, FRP motor cover, pressure gauge, suitable for operation on 415+/-10%volts,50HZ,AC power supply etc. complete in all respects as required by the standard specifications complete with all accessories as per technical specification, Capacity: 7m3/hr ,Head: 10 m
2
-
-
od106785/2021_2022 : Sludge Pump for Primary Clarifier : Supplying and fixing of self priming, non clog centrifugal pump for rated continuous duty and efficiency, CI construction, bronze impeller, complete with 3phase motor, FRP motor cover, pressure gauge, suitable for operation on 415+/-10%volts,50HZ,AC power supply etc. complete in all respects as required by the standard specifications complete with all accessories as per technical specification, Capacity: 7m3/hr ,Head: 10 m
2
-
-
od100266/2021_2022 : Sludge pump for Tertiary Clarifier : Supplying and fixing of self priming, non clog centrifugal pump for rated continuous duty and efficiency, CI construction, bronze impeller, complete with 3phase motor, FRP motor cover, pressure gauge, suitable for operation on 415+/-10%volts,50HZ,AC power supply etc. complete in all respects as required by the standard specifications and shall suit following capacities complete with all accessories as per technical specification Capacity: 4 m3/hr ,Head: 12 m
2
-
-
od25354/2021_2022 : Filtrate pump : Supplying and fixing of self priming, non clog centrifugal pump for rated continuous duty and efficiency, CI construction, bronze impeller, complete with 3phase motor, FRP motor cover, pressure gauge, suitable for operation on 415+/-10%volts,50 HZ,AC power supply etc. complete in all respects as required by the standard specifications and shall suit following capacities complete with all accessories as per technical specification Capacity: 4 m3/hr ,Head: 12 m
2
-
-
od25355/2021_2022 : Fine bubble diffuser system : Supplying and fixing of fine bubble tubular diffuser system of 90mm dia and 1000 mm length, EPDM make with capacity of min 7m3/hr (with two number diffusers) with SS tee 1X1 SS lifting hook 8 mm, SS foundation bolt 6 mm, SS C clamp suitable for 1" O.D, 1 ' hose and isolation valve of 25mm PP ball valve , PP Rope, PP swivel nut, PP sleeve, Silicone Washer, SS hose clamp, RCC block complete as per technical specification
36
-
-
od25357/2021_2022 : Supplying and fixing of agitator unit with SS- 304 stirrer and shaft for placing inside a sludge tank of size 2 m x 2 m x 3.1 m (including FB), 1 HP motor of 1500 rpm, 2 nos gear boxes, ladder, central bridge, etc. and all accessories.
1
-
-
od116480/2021_2022 : Supply, erection, testing and commissioning of Electro magnetic flow meter suitable for fixing in Treated water line with SS construction and IP 68 protection, wall mounting facility, cables, flow transmitter, converter ,integrator, totalizer, display unit and all accessories: 110mm PVC line for 200-600KLD
1
-
-
PIPING
-
-
-
od25505/2021_2022 : Supplying, laying, jointing and hydrostatically testing ISI marked PVC pipes as per IS 4985 and specials such as tees, elbows, bends, flanges, reducers, end caps, etc. as per IS 7834 or IS 10124 as the case may be including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers, etc. hire of tools and plant, cost and conveyance of water for testing ,etc. complete so as to with stand the internal design pressure of 10 kg/cm2, Size OD :40mm
100
-
-
od201125/2021_2022 : Supplying, laying, jointing and hydrostatically testing ISI marked PVC pipes as per IS 4985 and specials such as tees, elbows, bends, flanges, reducers, end caps, saddles, plugs, coupling, etc. as per IS 7834 or IS 10124 as the case may be including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers, ferule, etc. hire of tools and plant, cost and conveyance of water for testing etc. complete so as to withstand the internal design pressure of 10 kg/cm2: 50mm
126
-
-
od25507/2021_2022 : Supplying, laying, jointing and hydrostatically testing ISI marked PVC pipes as per IS 4985 and specials such as tees, elbows, bends, flanges, reducers, end caps, etc. as per IS 7834 or IS 10124 as the case may be including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers, etc. hire of tools and plant, cost and conveyance of water for testing ,etc. complete so as to with stand the internal design pressure of 10 kg/cm2, Size OD :63mm
26
-
-
od25509/2021_2022 : Supplying, laying, jointing and hydrostatically testing ISI marked PVC pipes as per IS 4985 and specials such as tees, elbows, bends, flanges, reducers, end caps, etc. as per IS 7834 or IS 10124 as the case may be including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers, etc. hire of tools and plant, cost and conveyance of water for testing ,etc. complete so as to with stand the internal design pressure of 10 kg/cm2, Size OD :75mm
252
-
-
od113396/2021_2022 : Supplying, laying, jointing and hydrostatically testing ISI marked PVC pipes as per IS 4985 and specials such as tees, elbows, bends, flanges, reducers, end caps, saddles, plugs, coupling,etc.as per IS 7834 or IS 10124 as the case may be including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers, ferule, etc. hire of tools and plant, cost and conveyance of water for testing etc. complete so as to withstand the internal design pressure of 10 kg/cm2: 90mm OD
162
-
-
od25510/2021_2022 : Supplying, laying, jointing and hydrostatically testing ISI marked PVC pipes as per IS 4985 and specials such as tees, elbows, bends, flanges, reducers, end caps, etc. as per IS 7834 or IS 10124 as the case may be including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers, etc. hire of tools and plant, cost and conveyance of water for testing ,etc. complete so as to with stand the internal design pressure of 10 kg/cm2, Size OD :110mm
300
-
-
od25512/2021_2022 : Supplying, laying, jointing and hydrostatically testing ISI marked PVC pipes as per IS 4985 and specials such as tees, elbows, bends, flanges, reducers, end caps, etc. as per IS 7834 or IS 10124 as the case may be including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers, etc. hire of tools and plant, cost and conveyance of water for testing ,etc. complete so as to with stand the internal design pressure of 10 kg/cm2, Size OD :160mm
4
-
-
od254718/2021_2022 : Supplying, laying, and joining schedule 40 UPVC ASTM pipe with perforations and schedule 80 ASTM-UPVC specials of approved make such as tees elbows, unions, bends, sockets bends, flanges, reducers, end caps, saddles, plugs, coupling etc. Including cost of all joining materials like solvent cement, bolts, nuts, rubber washers, ferrule, pipe supports, cost of extra wastage of fittings during laying of pipe line such as rectification and recharging of the existing line as and when required etc. Hire of tools and plant, cost and conveyance of water for testing after connecting to mains including all testing pipe line to the specified hydrostatic test pressure, rectifying any leakage or defects etc. complete as directed by Engineer in-Charge for water supply:40mm OD
88
-
-
od25645/2021_2022 : Providing and fixing G.I. pipes of C class complete with G.I. fittings : 65mm dia nominal bore
40
-
-
od25547/2021_2022 : Providing and fixing G.I. pipes of C class complete with G.I. fittings - 100 mm
70
-
-
od102190/2021_2022 : Providing and fixing G.I. pipes of C class complete with G.I. fittings : 125mm dia
5
-
-
od25549/2021_2022 : Providing and fixing G.I. pipes of C class complete with G.I. fittings - 150 mm
10
-
-
od25658/2021_2022 : Supplying and fixing of diaphragm valve body and bonnet shall be of polypropylene end connections flanged drilled to ASA 150 lbs flat face conforming to ANSI B 16.5, diaphragm shall be of neoprene make complete with bolts nuts etc - 40mm
12
-
-
od25659/2021_2022 : Supplying and fixing of diaphragm valve body and bonnet shall be of polypropylene end connections flanged drilled to ASA 150 lbs flat face conforming to ANSI B 16.5, diaphragm shall be of neoprene make complete with bolts nuts etc - 65mm
4
-
-
od113841/2021_2022 : Supplying and fixing of diaphragm valve body and bonnet shall be of polypropylene end connections flanged drilled to ASA 150 lbs flat face conforming to ANSI B 16.5, diaphragm shall be of neoprene make complete with bolts nuts etc - 80mm
3
-
-
od25660/2021_2022 : Proviidng and fixing of poly polypropylene ball valve, screwed type appropriate with PVC lines including supplying and fixing necessary tail pieces, flanges with bolts, nuts, etc. complete - 40 mm
10
-
-
18.19.3.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):40 mm nominal boreHorizontal
2
-
-
18.19.4.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):50 mm nominal boreHorizontal
2
-
-
18.19.5.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):65 mm nominal boreHorizontal
1
-
-
18.19.6.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):80 mm nominal boreHorizontal
1
-
-
od102391/2021_2022 : Providing and fixing of C I non-return valve of approved quality, screwed and including all necessary fittings with pressure PN 16-Horizontal :125mm
2
-
-
od99223/2021_2022 : Providing and fixing of C I non-return valve of approved quality, screwed and including all necessary fittings with pressure PN 16-Horizontal:150mm
2
-
-
18.17.3 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore
2
-
-
18.17.4 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore
2
-
-
18.17.5 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :65 mm nominal bore
3
-
-
18.31.1.2 : Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertion etc. (the tail pieces if required will be paid separately):100 mm diameter Class II
6
-
-
18.31.2.2 : Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertion etc. (the tail pieces if required will be paid separately):125 mm diameter Class II
2
-
-
18.31.3.2 : Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertion etc. (the tail pieces if required will be paid separately): 150 mm diameter Class II
1
-
-
od114076/2021_2022 : Providing and fixing of butterfly valve, appropriate with PVC lines including supplying and fixing necessary tail pieces, flanges with bolts, nuts, etc. complete - 100mm
6
-
-
od99233/2021_2022 : Supplying and fixing GM foot valve with all accessories including cost and conveyance of all materials, labour charges etc complete as directed by the Engineer -in - charge at all levels. 50mm dia
4
-
-
18.35.1 : Constructing masonry chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 grades stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 ( 1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
5
-
-
2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
100
-
-
2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
100
-
-
LT PANEL BOARDS
-
-
-
od114430/2021_2022 : Supply, Installation, Testing and Commissioning of Motor control panel-1 ,cubicle type,extensible on both sides made out of 2mm thick CRCA sheet, totally enclosed, IP 42, form 4,free standing,floor mounting, dust and vermin proof, suitable for operation on 3 phase, 415 V, 50Hz AC supply with provision for fixing incoming & outgoing switches, including internal wiring with suitable size wires/cable, interconnection, duly powder coated painting etc., The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) including following switchgears, metering instruments, all necessary interconnection and accessories for the LT Panel and as per SLD and specifications. The panel shall be Top/Bottom entry to receive incoming and outgoing cables. Incomer 125A, FP, 36 kA, MCCB with adjustable over load 0.8In to 1 In - 1no. BUSBARS 200 TPN, 36 kA, busbar chamber with Aluminium busbar INSTRUMENTS 4A, C curve SP MCB - 3 Nos. (0-500)V voltmeter, Acc. class 1 with 90 degree defl. Scale with voltmeter selector switch - 1 No. Ammeter( 0-125A) Acc. Cl 1 90 degree defl scale Analog meter- 3Nos. MFM- 1No 125/5A,15 VA class 1 ,Cast Resin CTs for metering - 3 Nos. RYB indication lamp, LED type - 1 set OUTGOING 63 A, TPN,SDFU with suitable Fuses- 2 Nos 32A TPN,SDFU with suitable Fuses- 16 Nos 3 phase DOL type with on/off push button, Single phase preventer, overload relay, auxillary & power contactors for 1 Hp to 3HP motor along with 1 kVAR (APP) capacitor for power factor compensation- 9 set. 3 phase DOL type with on/off push button, Single phase preventer, overload relay, auxillary & power contactors for 5P motor along with 2 kVAR (APP) capacitor for power factor compensation- 2 set. 3 phase star delta starter with on/off push button,thermal overload relay, single phasing preventer and auxillary & power contactors, 6 kVAR (APP) capacitor for 20HP motor - 2 set. On/Off indication lamp, LED type -13 set. Space provision for fixing 3 phase DOL /star-delta starter with on/off push button, thermal overload relay, single phasing preventer and auxillary & power contactors & ON/OFF indication lamps,capacitors in spare outlets -3nos
1
-
-
od114431/2021_2022 : Supply, Installation, Testing and Commissioning of Main Switch Board,cubicle type,extensible on both sides made out of 2mm thick CRCA sheet, totally enclosed, IP 42, form 4 construction, free standing, floor mounting, dust and vermin proof, suitable for operation on 3 phase, 415 V, 50Hz AC supply with provision for fixing incoming & outgoing switches, including internal wiring with suitable size wires/cable, interconnection, duly powder coated painting etc., The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) including following switchgears, metering instruments, all necessary interconnection and accessories for the LT Panel and as per SLD and specifications. The panel shall be Top/Bottom entry to receive incoming and outgoing cables. Incomer 250 A, FP, 36 kA, MCCB with adjustable over load 0.8In to 1 In - 1no. BUSBARS 300 TPN busbar chamber with Aluminium busbar INSTRUMENTS 4A, C curve SP MCB - 3 Nos. (0-500)V voltmeter, Acc. class 1 with 90 deg defl. Scale with voltmeter selector switch - 1 No. Ammeter( 0-250A) Acc. Cl 1 90 degree defl scale Analog meter- 3Nos. Multifunction meter- 1No 250/5A,15 VA class 1 ,Cast Resin CTs for metering - 3 Nos. RYB indication lamp, LED type - 1 set 250/5A,15 VA class0.5s ,Cast Resin CTs for metering - 3 Nos. TOD meter - 1 no OUTGOING 125A ,TPN,SDFU with suitable Fuses- 3 Nos On/Off indication lamp, LED type -3 set.
1
-
-
od114440/2021_2022 : Supply, Installation, Testing and Commissioning of Motor control panel-2 ,cubicle type,extensible on both sides made out of 2mm thick CRCA sheet, totally enclosed, IP 42, free standing,floor mounting, dust and vermin proof, suitable for operation on 3 phase, 415 V, 50Hz AC supply with provision for fixing incoming & outgoing switches, including internal wiring with suitable size wires/cable, interconnection, duly powder coated painting etc., The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) including following switchgears, metering instruments, all necessary interconnection and accessories for the LT Panel and as per SLD and specifications. The panel shall be Top/Bottom entry to receive incoming and outgoing cables. Incomer 32A, FP, 25 kA,MCCB with adjustable over load 0.8In to 1 In - 1no. BUSBARS 40 TPN, 25kA , busbar chamber with Aluminium busbar INSTRUMENTS 4A, C curve SP MCB - 3 Nos. (0-500)V voltmeter, Acc. class 1 with 90 deg defl. Scale with voltmeter selector switch - 1 No. Ammeter( 0-32A) Acc Class 1 90 degree defl. Scale analog meter- 3Nos. 32/5A,5 VA class 1 ,Cast Resin CTs for metering - 3 Nos. RYB indication lamp, LED type - 1 set OUTGOING 32 A, TPN,SDFU with suitable Fuses-18 Nos 3 phase DOL starter with on/off push button,thermal overload relay, single phasing preventer and auxillary power contactors, 1kVAR (APP) capacitor for 1-2HP motor -15 Set. On/Off/Trip indication lamp, LED type - 15 set. Space provision for fixing 3 phase DOL /star-delta starter with on/off push button, thermal overload relay, single phasing preventer and auxillary & power contactors & ON/OFF indication lamps,capacitors in spare outlets - 3nos
1
-
-
LT CABLING
-
-
-
9.1.25 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 120 sq. mm (45mm)
6
-
-
9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)
4
-
-
od112729/2021_2022 : Supplying and making end termination with brass brass compression gland and Cu lugs for following 4Cx2.5 sqmm 1 size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
70
-
-
7.1.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. mm
187
-
-
7.1.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 95 sq. mm and upto 185 sq. mm
319
-
-
7.2.1 : Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. mm
1111
-
-
7.5.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm
199
-
-
7.5.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 95 sq. mm and upto 185 sq. mm
9
-
-
7.6.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Above 95 sq. mm and upto 185 sq. mm
5
-
-
7.7.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
104
-
-
7.7.3 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
3
-
-
7.8.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
150
-
-
7.8.3 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
5
-
-
od112736/2021_2022 : Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc as required 40 mm dia
10
-
-
14.13.1 : Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required 50 mm dia
50
-
-
14.13.3 : Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required 100 mm dia
25
-
-
od112737/2021_2022 : Fabrication, supply and installation of following size of Ladder GI cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with MS suspenders and painting etc as required 300 MM WIDTH X 50 MM DEPTH X 2MM THICK
60
-
-
od112740/2021_2022 : Fabrication, supply and installation of following size of Ladder Type GI cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M8 threaded rod and all necessery accessories as required 150 MM WIDTH X 50 MM DEPTH X 2 MM THICK
60
-
-
7.10 : Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with
inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing
the same in ground as required.
15
-
-
od112743/2021_2022 : Providing & fixing Fire Barrier mortar with minimum 2 hours fire rating when tested in accordance with BS 476 part 20 and UL 1479 for horizontal openings in fire rated floors or slabs and vertical openings in walls for passing service shafts. The service lines could be of various types like electrical cables trays, metal pipes, GI Ducts for AC, etc.The mortar shall have minimum hardened density of 0.8 g/cm3 and It should have a compressive strength of 2.9N/Sq mm . The product shall be Smoke & Air Seal and 30 years Age tested as per Dafstb and DIBT standards. The product shall be tested and approved by third party agencies such as UL and FM. The mortar should be tested in accordance with IEC 60068-2-57:1999-11 (Environmental Testing) as per Part 2-57: Test for Vibration-Time-history method and VERTEQII for seismic zone 4. The product shall bear the UL and FM approval logo on the packing where applicable.
0.6
-
-
od112744/2021_2022 : Supply, fabricating and installing MS items such as Tees/ angles/ channels etc. on floor/ ceiling/ wall including necessary civil work such as grouting, finishing etc. and painting with two coats of zinc chromate primer and two coats of enamel paint of approved make.
100
-
-
od112745/2021_2022 : 2.5 sqmm 4 core PVC / XLPE insulated armoured control cables with copper conductors for working voltages up to and including 1100 V conforming to IS 1554 part I 1988 for PVC and IS 7098 Part I for XLPE
925
-
-
14.14.3 : Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.250 mm dia
10
-
-
od114407/2021_2022 : Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date. 4C 10 sqmm Al
16
-
-
od114408/2021_2022 : Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date. 3.5C 120 sqmm Al
336
-
-
od114409/2021_2022 : Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date. 2C 6sqmm Al
5
-
-
od114411/2021_2022 : Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date. 3C 16 sqmm Al
25
-
-
9.1.1 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm)
2
-
-
9.1.8 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 16 sq. mm (25mm)
4
-
-
od114466/2021_2022 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3C 4sqmm Cu
52
-
-
od116530/2021_2022 : Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date. 3C 4 Sq.mm Cu.
781
-
-
WIRING AND ACCESSORIES
-
-
-
od112653/2021_2022 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in existing PVC conduit, and earthing the pointwith 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. asrequired. Group C
1
-
-
od112664/2021_2022 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in existing PVC conduit, with modular switch, modular plate, suitable GI box and earthing thepoint with 1.5 sq.mm. FRLS PVC insulated copper conductor single corecable etc as required. Group C
7
-
-
1.17.3 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm
50
-
-
1.17.12 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm
45
-
-
1.17.21 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm
30
-
-
1.31 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in
recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps
modular switch, connection etc. as required. (For light plugs to be used in non residential
buildings).
1
-
-
1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch
3
-
-
1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet
3
-
-
1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)
6
-
-
1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.- 20 mm
50
-
-
1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. - 25 mm
20
-
-
1.21.3 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. - 32 mm
20
-
-
MCB, DB AND ACCESSORIES
-
-
-
2.14.1 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.- 25 amps
1
-
-
2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. - Single pole
8
-
-
2.11 : Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
10
-
-
2.25 : Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for tripple pole and neutral, sheet steel, Vertical MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.
1
-
-
od112733/2021_2022 : Supply and fixing outdoor type START/STOP (2way) push button station (IP65) including all the necessary accessories as required complete with suitable mounting arrangement.(Cat No Hensel-PBS 0201 or equivalent approved make)
29
-
-
90.11.1.14 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required
1
-
-
2.3.2 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator) 8 way, Double door
1
-
-
2.23.2 : Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with testing and commissioning etc. as required. For 8 way, Double door SPN MCBDB
1
-
-
2.10.3 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole
1
-
-
od114298/2021_2022 : Supplying and fixing of following rating isolators mounted on suitable thermo plastic type or cast aluminium box of IP 65 protection suitable for wall / plate / pedestal mounting (Make Hensel KV 6104 or equivalent approved make) .Scope shall be complete with necessary minor civil works,grouting etc. 63 A, FP, ISOLATOR
2
-
-
od114299/2021_2022 : Supplying and fixing of following rating isolators mounted on suitable thermo plastic type or cast aluminium box of IP 65 protection suitable for wall / plate / pedestal mounting(Make Hensel KV 6104 or equivalent approved make) .Scope shall be complete with necessary minor civil works,grouting etc. 32 A, FP, ISOLATOR
26
-
-
od114318/2021_2022 : Supply and fixing of following rating residual current circuit breaker with MCB having earth leakage and overload protection (RCCB+MCB) as per specification as required 32A 4Pole 100mA sensitivity
1
-
-
LIGHT FIXTURES AND FANS
-
-
-
od112694/2021_2022 : Supply of indoor industrial surface mounted LED tube with Batten along with driver , surge protector, with maximum system wattage of 40 Watts,lumen output of luminaire greater than 4000 lumen, power factor grater than 0.9, rated life of L70 @ 50,000 hours, system efficacy greater than 100lumen/watt and including all necessary accessories as required complete. (Make:- Cat No: WIPRO OPTIMA ll24 or equivalent approved make )
5
-
-
od112697/2021_2022 : Supply of indoor decorative surface mounted LED Batten with Polycarbonate Diffuser ,along with driver,with a maximum system wattage of 10 Watts,lumen output of luminaire greater than 1000, power factor grater than 0.9, rated life of L70 @ 50,000 hours, system efficacy greater than 100lumen/watt and including all the necessary accessories as required complete. (Make:- Cat No: WIPRO -LL20-111-XXX-65NE3 or equivalent approved make )
3
-
-
od112706/2021_2022 : Supply of 250 mm sweep, 900 rpm light duty exhaust fan in plastic body with self opening louvers working on 230 V AC supply complete with all accessories as required. (Make: Orient Smart Air Exhaust or equivalant approved make)
1
-
-
1.41 : Installation, testing and commissioning of pre - wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
10
-
-
1.49 : Numbering of ceiling fan / exhaust fan/ fluorescent fittings as required.
11
-
-
1.50.1 : Installation of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required. - Upto 450 mm sweep
1
-
-
od114277/2021_2022 : Supply of 10w LED Bulk head fitting with die cast aluminium housing, PC diffuser and IP65 Protection suitable for wall / ceiling including giving connections with required length of 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire and making good the surface as required.(make: Wipro . LW07-141-XXX-57-G1 or equivalent )
2
-
-
EARTHING AND SAFETY EQUIPMENTS
-
-
-
od114254/2021_2022 : Providing and fixing GI/Cu strip/wire on surface or in recess for connections etc. as required. 25mm X 6mm GI
16
-
-
od114255/2021_2022 : Supplying and laying G.I/Copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) 3.15mm Cu (10 SWG)
459
-
-
od114256/2021_2022 : Providing and fixing GI/Cu strip/wire on surface or in recess for connections etc. as required. 3.15mm Cu (10 SWG)
37
-
-
od114273/2021_2022 : Supplying and laying G.I/Copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc.complete in all respect as per technical specification (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt ; spring washer spaced at 50mm) 25mm x 6 mm GI
100
-
-
od114274/2021_2022 : Earthing with C.I. earth pipe 4 metre long, 100 mm dia including accessories, and providing masonry enclosure with heavy duty CI cover plate of 300X300mm having locking arrangement and watering pipe etc. with 64kg charcoal/ coke and 5kg salt as required. (As per IS 3043 ammended uptodate)
4
-
-
od116263/2021_2022 : Supply and fixing anodised aluminum glass framed shock treatment chart.
1
-
-
od116264/2021_2022 : Supplying of Rubber hand gloves suitable for 11 KV.
1
-
-
od116265/2021_2022 : Supply and fixing of of fire retardant/extinguishing electrical insulated synthetic mat of 2m x 1m x 2 mm for 3.3kV grade thick, +/- 10% confirming to BIS: DOC No. ET-02 (5440) meeting requirements of IS:15652:2006 (with upto date amendment), suitable for 3.3kV voltage and having minimum width of 1000mm +/- 20mm and including supply of required quantity of adhensive / compound .
3
-
-
EXTERNAL LIGHTING
-
-
-
90.15.3.3 : Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70 mm top diameter, 130 mm bottom diameter thickness 3mm base plate dimensions of 200x200x12 mm suitable for wind speed as per IS 875 Part III single arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc. complete 6 Meters
3
-
-
90.15.3.4 : Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70 mm top diameter, 130 mm bottom diameter thickness 3mm base plate dimensions of 200x200x12 mm suitable for wind speed as per IS 875 Part III double arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc. complete 6 Meters
4
-
-
90.15.4.9 : Supply Conveyance, installation, testing and commissioning of 150W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)
11
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements