Kerala Industrial Infrastructure Development Corporation Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Kerala Industrial Infrastructure Development Corporation - KINFRA Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date5 Nov 2022
Closing Date26 Nov 2022
Tender Amount₹ 3,55,21,778
Costs
EMD
₹ 1,00,000Document Cost
₹ 8,850Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_KINFR_525237_1Bid Award Id
ViewTender No
KINFRA/KTPM/21/2022-23Tender Authority
Kerala Industrial Infrastructure Development Corporation ViewPurchaser Address
-Website
http://http://kinfra.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
643.07
-
-
... More
2.7.1
Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock
105.46
-
-
... More
2.6.1
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
56.78
-
-
... More
2.26.2
Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.Ordinary or hard rock
68.64
-
-
... More
2.25
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
371.93
-
-
... More
od216439/2022_2023
Conveying and depositing surplus earth /Ordinary rock upto 1Km lead and part thereof including loading and unloading as directed by Engineer- in-Charge.
5510.42
-
-
... More
Plain Cement Concrete works
-
-
-
... More
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
149.85
-
-
... More
4.11
Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
5.91
-
-
... More
od216436/2022_2023
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.
5.91
-
-
... More
2.34.1
Supplying chemical emulsion in sealed containers including delivery as specified.Chlorpyriphos / Lindane emulsifiable concentrate of 20%
5.6
-
-
... More
2.35.3.1
Diluting and injecting chemical emulsion for POST -CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion):Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
8.8
-
-
... More
Reinforced Cement Concrete works
-
-
-
... More
5.3
Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
7.25
-
-
... More
5.1.2
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size
264.4
-
-
... More
od216438/2022_2023
Providing and fixing at or near ground level precast cement concrete in slabs,kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), including the cost of required centering, shuttering complete.1:1.5:3 ( 1 cement : 1.5 coarse sand (Zone III): 3 graded stone aggregate 20 mm nominal size)
19.12
-
-
... More
5.9.1
Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
641.53
-
-
... More
5.9.2
Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
1826.8
-
-
... More
5.9.3
Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
560.85
-
-
... More
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
3.91
-
-
... More
5.9.6
Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
33.79
-
-
... More
5.9.19
Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges
8.83
-
-
... More
5.22.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
22956.16
-
-
... More
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo mechanically treated bars of grade Fe-500 or more
761.71
-
-
... More
Masonry Work
-
-
-
... More
50.6.1.4
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
1.58
-
-
... More
50.6.1.5
Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
8.38
-
-
... More
7.1.1
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)
152.04
-
-
... More
13.33.1
Pointing on stone work with cement mortar 1:3 ( 1 cement : 3 fine sand):Flush/ Ruled pointing
4.59
-
-
... More
Joinery works
-
-
-
... More
21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel
screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron
34.53
-
-
... More
21.1.2.2
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)
59.09
-
-
... More
od216433/2022_2023
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5 mm depth and 5 mm width
30.42
-
-
... More
od216437/2022_2023
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge. Pre- laminated particle board with decorative lamination on both sides
3.78
-
-
... More
21.3.1
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness
6.57
-
-
... More
21.11.2
Providing and fixing stainless steel (SS 304 grade) adjustable friction window stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer - in- Charge complete.255 x 19 mm
16
-
-
... More
9.97.1
Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:300x10
3
-
-
... More
9.97.2
Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:250x10 mm
3
-
-
... More
9.100.2
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:100 mm
5
-
-
... More
21.15.2
Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary necessary screws etc. complete.Powder coated minimum thickness 50 micron aluminium
16
-
-
... More
9.101.1
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Single rubber stopper
2
-
-
... More
9.88
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
3
-
-
... More
Steel works and roofing works
-
-
-
... More
9.48.2
Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc.
88.34
-
-
... More
10.25.2
Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
2764.8
-
-
... More
10.16.3
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Electric resistance or induction butt welded tubes
2419.2
-
-
... More
Flooring works
-
-
-
... More
11.41.2
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
14.65
-
-
... More
11.46.2
Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
2.58
-
-
... More
8.31
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge,in skirting, risers of steps and dados, over 12 mm thick bed of cementmortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matchingshade complete.
14.4
-
-
... More
Finishing work
-
-
-
... More
13.43.1
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
38.58
-
-
... More
13.60.1
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
65.06
-
-
... More
5.23
Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 ( cement : 3 fine sand).
98.88
-
-
... More
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
124.65
-
-
... More
13.46.1
Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
158.45
-
-
... More
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
518.81
-
-
... More
13.52.1
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per
manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
162.09
-
-
... More
Road works
-
-
-
... More
2.3.1.A
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness In area of light jungle - By Manual Means
0.77
-
-
... More
3.4
Excavation for roadway in ordinary rock by deploying a dozer, 80 HP including cutting and pushing the cut earth to site of embankment upto a distance of 100 metres ( average lead 50 metres ), trimming bottom and side slopes in accordance with the requirements of lines, grades and cross sections.
3018.73
-
-
... More
3.3
Excavation for road way in soil with Dozer including cutting and pushing the earth to site of embankment upto a distance of 100 metres (average lead 50 metres), including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections.
1625.49
-
-
... More
3.17
Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2.
560.01
-
-
... More
3.18
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2
63.41
-
-
... More
4.1.A.2
Construction of granular sub-base by providing graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 Grading-II - Plant Mix method
1193.51
-
-
... More
4.12
Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.
1438.43
-
-
... More
5.4.2a
Dense Graded Bituminous Macadam :- For Grading II (26.5 mm nominal size) Providing and laying dense graded bituminous macadam with 80-100 TPH HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder (VG 30) @ 4.0 to 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.
331.39
-
-
... More
5.6.1.a
Providing and laying bituminous concrete with 80-100 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder(NRMB) @ 5.2 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No.
507 complete in all respects For Grading - I ( 19 mm nominal size )
159.79
-
-
... More
5.1.a
Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means
5753.73
-
-
... More
5.2.b
Providing and applying tack coat with bitumen emulsion (RS) using emulsion pressure distributor at the rate of 0.25 - 0.30 kg per sqm on the prepared Granular Surface cleaned with mechanical broom.
5753.73
-
-
... More
5.2.a
Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.
5523.15
-
-
... More
8.13
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads on Bituminous Surface @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes
222.94
-
-
... More
8.6
Providing and fixing of direction and place identification retro-reflectorised sign with 7 years warranty manufactured as per IRC :67 High Intensity Micro Prismatic (Type IV) grade sheeting fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with area exceeding 0.9 sqm, with suitable back supporting frame of MS angle 40x40x6 and supported on suitably designed GI pipe pole not less than 50mm NB , 2 Nos. confirming to IS 1239, firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc.
3.24
-
-
... More
8.1.B
Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 325 mm high in M 20 Grade PCC Using Concrete Batching and Mixing Plant on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually all complete as per clause 409
1152.9
-
-
... More
External work
-
-
-
... More
od216430/2022_2023
Demolishing blockwork/brickwork manually or by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge.In cement mortar
28.7
-
-
... More
15.9.2
Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In cement mortar
78.58
-
-
... More
15.56
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
117.5
-
-
... More
15.60
Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved
277.89
-
-
... More
19.36.1
Providing and laying Non Pressure NP-4 class (Heavy duty) R.C.C. pipes includingcollars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2(1 cement : 2 fine sand) including testing of joints etc. complete.450 mm dia RCC pipes
120
-
-
... More
19.36.2
Providing and laying Non Pressure NP-4 class (Heavy duty) R.C.C. pipes includingcollars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2(1 cement : 2 fine sand) including testing of joints etc. complete. 600 mm dia RCC pipe
20
-
-
... More
19.32.1
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
... More
Plumbing Works
-
-
-
... More
17.2.1
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid
1
-
-
... More
50.17.1.4
Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.
1
-
-
... More
17.7.4
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x400mm with single 15 mm C.P.brasspillar taps
1
-
-
... More
18.49.1
Providing and fixing C.P brass bib cock of approved quality conforming to IS: 8931.15 mm nominal bore
1
-
-
... More
18.53.1
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore
3
-
-
... More
18.21.1.1
Providing and fixing uplasticised PVC connection pipe with brass unions:30 cm length15 mm nominal bore
2
-
-
... More
17.31
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
1
-
-
... More
17.28.1.1
Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC.waste fittings complete.Semi rigid pipe32 mm dia
1
-
-
... More
50.18.8.6.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2
2
-
-
... More
50.18.8.8.1
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 6 Kgf/cm2
3
-
-
... More
50.18.8.9.1
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2
2
-
-
... More
50.18.9.18.1
Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall
3
-
-
... More
50.18.9.19.1
Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall
3
-
-
... More
50.18.9.19.2
Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall
8
-
-
... More
50.18.9.21.2
Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75 mm dia 45 degree Elbow
2
-
-
... More
50.18.9.21.6
Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75x75x75 mm dia Door Tee
1
-
-
... More
50.18.9.21.7
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Vent cowl
1
-
-
... More
50.18.9.22.2
Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow
2
-
-
... More
50.18.9.22.6
Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia door tee
1
-
-
... More
50.18.9.22.8
Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl
1
-
-
... More
18.58.1.1
Providing and fixing PTMT grating of approved quality and colour.Circular type100 mm nominal dia
1
-
-
... More
od217090/2022_2023
Providing and Fixing C.P. brass or stainless steel(SS-304) Square Flat cut single piece Gratings size 125x125 mm. Gratings for 110mm. Floor Traps.br
1
-
-
... More
50.18.8.3.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2
6
-
-
... More
50.18.7.3.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall
20
-
-
... More
50.18.7.4.1
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall
20
-
-
... More
18.48
Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
500
-
-
... More
18.62.3
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P / H.P.H.D plastic ball.25 mm nominal bore, 152 mm long, weighing not less than 440 gms
1
-
-
... More
50.18.9.8.1
Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 6 Kgf/ cm2
10
-
-
... More
50.18.9.9.1
Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2
10
-
-
... More
19.4.1.1
Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:100x100 mm size P typeWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
... More
19.7.1.1
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weigh of cover 23 kg and weight of frame 15 kg):With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
... More
19.33
Constructing soak pit 1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
2
-
-
... More
51.19.ST1
Supplying and installing ready made PVC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (Provision for CC/RCC/Sand/06mm aggregate for the preparation of bed shall be paid separately) 1. Below 15 flush capacity
1
-
-
... More
ELECTRICAL WORK MAIN RECEIVING STATION (MRS)
-
-
-
... More
od159393/2022_2023
Supply, fabrication, installation, testing and commissioning of one number 11 kV, four pole' structure using 12 mtr. A-Type poles, ISMC 100x50 mm and 65x65x8 mm for Cross arms, all hot dip galvanised with required supporting bracing members, bolts & nuts etc; complete for the satisfactory formation of the structure, complete as per standards and directions of Engineer-in-charge, excluding the cost of excavation of pits and concrete foundation.Note : All the components shall be as per the drawing as directed by the Engr in charge and all MS items shall be hot dip galvanised."" & OUTDOOR HT METERING PANELbrSupply,installation ,testing and commissioning of KSEB metering cubicle outdoor type IP65 with 2nos. of 11 kV, 200/5 CT of latest approved class and 1 number 3 phase 11 kV/110 V PT with 11 kV compatible TOD meter with current Inspectorate approved accuracy class including test terminal block and control fuses.brSupplying, erecting, testing and commissioning of one number HT TOD meter with test certificate obtained from KSEB/Electrical Inspectorate (C.Ts,P.Ts also shall be tested from KSEB/EI and certificate obtained).This includes the dismantling of CTs and PTs from the breaker getting it tested from Electrical Inspectorate and refixing them in the unit.brNote : All items shall meet with latest specifications and norms of KSEB & Electrical Inspectorate. NOTE: Preparation of all drawings submitting and getting initial approval of (Electrical inspectorate/KSEBL) ,submitting completion certificates and arranging inspection of Electrical inspectorate/KSEBL ,getting sanction and energization certificates from KSEBL,EI ,obtaining electrical connection includes all miscellaneous expenses etc. for commissioning of the whole installation in the premises is in contractor scope (All statutory payment borne by client upon the submission of the receipt)
1
-
-
... More
od159394/2022_2023
Erection of one number 12 Mtr. 'four pole' structure in cement concrete 1:2:4 (1cement:2 coarse sand:4 graded stone aggregate 20mm nominal size) foundation including cement concrete, excavation of pits for standard depth and backfilling etc. as required and secured with holding clamps, bolts, nuts,etc.Note : All type of RCC/ Foundation works as per drawing/specification and as directed by the Engineer-in-charge at all levels."
1
-
-
... More
od159395/2022_2023
"Providing, fabrication and fixing 2 Mtr. high chainlink fencing over 600 mm high RR masonry as per design and specification. Chain link mesh of size 50x50 mm made of GI wire of dia. 4 mm chain link with a frame work of 50x50x6 mm MS angle between vertical posts of ISMC 75 at 2400 mm interval, which are embedded in cement concrete blocks 45x45x60 cm of mix 1:2:4 (1Cement : 2 fine sand : 4 graded stone aggregate of 20 mm nominal size) (above GL) with adequate footing depth as per drawing between the RR masonry. RR masonry (450 mm thick) and 600 mm from ground level for foundation and plinth in cement mortar(1:6).The random rubble masonry is to be pointed using cement mortar 1:3 to have a flush finish. One of the fencing frame shall be openable with necessary fittings. One 1.5mtr wide gate shall be provided with suitable locking arrangements. All MS framework for chain link fencing shall be hot dip galvanised.brNote : The rate shall be inclusive of all materials, labour, lead, lift,etc. including excavation."
33
-
-
... More
od159396/2022_2023
Supplying and spreading 40 mm size broken stone for 150 mm thick in the substation yard including cost and conveyance of all materials, labour charges etc. complete.
5.24
-
-
... More
13.1
Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/ 20 mmdia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stayclamps, turn buckle ( 20 mm X 600 mm ), 7/ 4.00 mm dia G.I. stay wire and 11 KV strain insulatoretc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mmnominal size ) foundation including excavation and refilling etc as required.
2
-
-
... More
13.10
Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required
6
-
-
... More
13.11
Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required.
12
-
-
... More
od160496/2022_2023
11 kV lightning Arresters with necessary ancillary material , complete erected on provided cross arm and connected to over head line. The lightning arrestors to be provided should be of Thyrite type and suitable for 11 kV supply. The cost included the set of 3 Nos. of 11 kV lightning arrestors. The spacing between the lightning arrestors should be as per the relevant IS.
1
-
-
... More
od159853/2022_2023
Supply of ACSR Racoon conductor of size 6/1/4.09 mm
45
-
-
... More
od159854/2022_2023
Stringing of ACSR Racoon conductor of size 6/1/4.09 mm on the posts with necessary binding materials etc. as required.
45
-
-
... More
11 kV OVER HEAD DISTRIBUTION LINE ALLIED WORKS
-
-
-
... More
od161632/2022_2023
Supply, fabrication, installation, testing and commissioning of A-Type angle iron pole comprising of 1 Nos. 12 Mtr. height, 100 x 100 x 8 mm angle iron welded together after providing 50x50x6 mm angle iron spacers/steps of 0.5 m spacing and adequate length on opposite sides, erecting the same in cement concrete foundation excluding the civil foundation.brNote: All the MS items shall be of hot dip Galvanised. Pole Number should be painted on every pole. All works shall be as directed by the Engineer-in-charge.
18
-
-
... More
od163389/2022_2023
Erection of metallic 12 mtr. A-pole in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) RCC foundation including excavation of pits and backfilling etc. as required and as directed by the Engr in charge. (As per the drawing attached)br
18
-
-
... More
13.1
Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/ 20 mmdia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stayclamps, turn buckle ( 20 mm X 600 mm ), 7/ 4.00 mm dia G.I. stay wire and 11 KV strain insulatoretc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mmnominal size ) foundation including excavation and refilling etc. as required.
18
-
-
... More
13.10
Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc.as required
234
-
-
... More
13.11
Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required.
150
-
-
... More
od163823/2022_2023
"Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) Pole top bracket/cross arm for single circuit 11KV over head line conductors complete with 50 mm X 6 mm flat iron clamps, with bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing and shall be hot dip galvanized)."
20
-
-
... More
od163824/2022_2023
Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) double pole cross arm for three wire 11 kV over head line conductor complete with bolts & nuts for clamping to the poles, 50 mm X 6mm MS flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins, bolts, nuts, washers etc.(Note : All the item shall be as per the drawing and hot dipgalvanised
18
-
-
... More
od163825/2022_2023
"Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) V shape cross arm for two 11 kV over head line conductors complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing).br(Note : All the MS items shall be as per the drawing and hot dip galvanised)"
20
-
-
... More
od163826/2022_2023
Erection of pole top/straight two wire /V shape two wire,angle iron/channel iron,crossarm on 12 mtr. Apole for 11 kV as required.br
65
-
-
... More
od163534/2022_2023
"Supplying One Galvanised channel of size 75 mm X 40 mm X 6 mm (7.14 kg per metre) for LT 4 line cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc. (as per drawing) as required.br (Note : All the MS items shall be hot dip galvanised.)"br
20
-
-
... More
od163535/2022_2023
Fitting one galvanised channel iron 75mmx40mmx6mm (7.14kg per meter) cross arm for 4 wire overhead line complete with clamps,bolts, nuts and washers etc. including drilling of holes for insulator pins etc(as per drawing) as required.br
94
-
-
... More
od163536/2022_2023
Supply of cradle type line guard assembly having 1500mm width,made from GI wires of size not less than 8 SWG.The mesh size shall not be more than 600mmx600mm.The cradle shall be confirming to standard engineering practise and IE rule 88.br
700
-
-
... More
od163537/2022_2023
Erection of cradle guard as per standard number of guard wires and spacing of lacings.
700
-
-
... More
90.16.1.5
Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.75 mm copper conductor (6 SWG)
40
-
-
... More
od161982/2022_2023
Supply and installation of Cradling cross arm 75x40mm GI channel iron cross arms 1.5m length 10.2kg/cross arm with clamp, nuts & bolts, etc in completebr
22
-
-
... More
12.16
Supplying and erection of 75 mm X 90 mm shackle insulator with G. I. Bolt, nuts and straps etc.as required .
120
-
-
... More
od159853/2022_2023
Supply of ACSR Racoon conductor of size 6/1/4.09 mm br
1100
-
-
... More
od159854/2022_2023
Stringing of ACSR Racoon conductor of size 6/1/4.09 mm on the posts with necessary binding materials etc. as required.
1100
-
-
... More
od161983/2022_2023
Supply of of ACSR Rabbit conductor of size 6/1/3.35 mmbr
1400
-
-
... More
od161984/2022_2023
Stringing one meter of ACSR Rabbit conductor including binding etc.as required.br
1400
-
-
... More
od161985/2022_2023
Supply and installation of 11 kV Discharge Rod including all accessories required.br
1
-
-
... More
od214681/2022_2023
Supplying of 11 kV, XLPE insulated, heavy duty, aluminium conductor. 11 kV grade armoured cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970.br11 kV grade,3Cx150 Sqmm Alu.br
100
-
-
... More
od214790/2022_2023
Supplying of XLPE insulated, heavy duty, aluminium conductor 1.1 kV grade armoured MV cable of the following sizes as required, generally conforming to IS:7098.br3Cx25Sqmm Ar,Alu.
246.04
-
-
... More
od214791/2022_2023
Supplying of XLPE insulated, heavy duty, aluminium conductor 1.1 kV grade armoured MV cable of the following sizes as required, generally conforming to IS:7098. 3.5Cx70Sqmm Ar,Alu.
80
-
-
... More
od214792/2022_2023
Supplying of XLPE insulated, heavy duty, aluminium conductor 1.1 kV grade armoured MV cable of the following sizes as required, generally conforming to IS:7098.br3.5Cx185Sqmm Ar,Al.br
150
-
-
... More
9.1.23
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm)
8
-
-
... More
9.1.27
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)
10
-
-
... More
od214866/2022_2023
Supply,installation,testing and commissioning of Cable End Termination for following size XLPE complete,double compression gland for indoor type and heat shrinkable termination kit for indoor type.11kV(E) grade,3x150Sqmm XLPE cable with double compression gland(Indoor type).
8
-
-
... More
od214867/2022_2023
Supply,installation,testing and commissioning of Cable End Termination for following size XLPE complete,double compression gland for indoor type and heat shrinkable termination kit for outdoor type.br11 kV(E) grade,3x150Sqmm XLPE cable with heat shrinkable termination kit(outdoor type).br
8
-
-
... More
7.1.1
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade offollowing size direct in ground including excavation, sand cushioning, protective covering andrefilling the trench etc as required.Upto 35 sq. mm
250
-
-
... More
7.1.2
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade offollowing size direct in ground including excavation, sand cushioning, protective covering andrefilling the trench etc as required.Above 35 sq. mm and upto 95 sq. mm
80
-
-
... More
7.7.2
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KVgrade of following size on wall surface as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
50
-
-
... More
7.1.3
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering andrefilling the trench etc as required.Above 95 sq. mm and upto 185 sq. mm
150
-
-
... More
8.1.2
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 120 sq. mm and upto 400 sq. mm
90
-
-
... More
od161987/2022_2023
Supply of 9Mtr Hot dip galvanised pole for strut of ISMB 175x85mm on a suitable concrete foundation excluding the cost of foundation br
2
-
-
... More
11.4
Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required
2
-
-
... More
od161967/2022_2023
Supplying and providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling as per standardsbr
18
-
-
... More
DOUBLE POLE STRUCTURE
-
-
-
... More
od160653/2022_2023
"Supply, fabrication, installation, testing and commissioning of one number 11 kV, Double pole structure using 12 mtr. A-Type poles, ISMC 100x50 mm and 65x65x8 mm for Cross arms, all hot dip galvanised with required supporting bracing members, bolts & nuts etc; complete for the satisfactory formation of the structure, complete as per standards and directions of Engineer-in-charge, excluding the cost of excavation of pits and concrete foundation.brNote : All the components shall be as per the drawing as directed by the Engr in charge and all MS items shall be hot dip galvanised."br
2
-
-
... More
od160654/2022_2023
"Erection of one number 12 Mtr. 'Double pole' structure in cement concrete 1:2:4 (1cement:2 coarse sand:4 graded stone aggregate 20mm nominal size) foundation including cement concrete, excavation of pits for standard depth and backfilling etc. as required and secured with holding clamps,bolts,nuts,etc.brNote : All type of RCC/ Foundation works as per drawing/specification and as directed by the Engineer-in-charge at all levels."br
2
-
-
... More
od159396/2022_2023
Supplying and spreading 40 mm size broken stone for 150 mm thick in the substation yard including cost and conveyance of all materials, labour charges etc. complete.
24.96
-
-
... More
od160496/2022_2023
11 kV lightning Arresters with necessary ancillary material , complete erected on provided cross arm and connected to over head line. The lightning arrestors to be provided should be of Thyrite type and suitable for 11 kV supply. The cost included the set of 3 Nos. of 11 kV lightning arrestors. The spacing between the lightning arrestors should be as per the relevant IS.br
5
-
-
... More
od215012/2022_2023
"Supply, installation, testing and commissioning of totally enclosed free standing floor/wall mounting, dust and vermin proof outdoor cubical type, with IP55 protection Panel, with double door and with extended canopies, suitable for 415V 3phase, 50Hz supply with provision for fixing incoming and outgoing switches fabricated using 2mm CRCA sheet for outter and 1.6mm CRCA sheets inside for cable alley, bus bar chamber, all powder coated as per approved colour, hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets removable gland plates as per specifications including
RCC foundation as per manufactures standards. The panel shall be suitable for bottom cable entry type with all accessories as per drawing and specifications with;Incomer - 400 A 4P MCCB with E/F release system. - 1No.brRYB Phase indication lamps(Lamps shall be LED) with control fuse and switches - 1 set. Salzer Voltmeter with selector switch (0-500)V Accuracy class 1 with 90 degree deflection scale - 1No. Salzar Ammeter (0-400)A Accuracy class 1 with 240 degree deflection scale - 1No. Ammeter Selector Switch -1 No. Current Transformer 400/5A - 1 set. Busbar Support: SMC. Busbar size: 50 x 5mm Copper bar for Phase, Neutral and Earth.Outgoing - 1) 200A 4P MCCB - 1 set.br 2) 100A 4P MPCB - 2 sets. (Spare)br 3) 32A 4P - 1 set.brVendor's general arrangement and scheme drawing along with CPRI certificate and approval and manufacturing clearance to be obtained from Engineer-In- Charge.
2
-
-
... More
od160441/2022_2023
Gang operated, triple pole, 11 kV AB Switch mounted on provided channel with adequate length of GI pipe for the operating handle erected supported with bush bearing. The operating handle should be provided with locking arrangement with lock & key at suitable height from ground level with necessary clamp. This should have hot dip galvanized hardware (corrosion resistance) alignment of three arms must be perfect and GOAB operation must be smooth and simultaneous operating hands must be suitable for normal height of operator.br
3
-
-
... More
od159852/2022_2023
11 kV outdoor type dropout Fuse with 11 kV insulator complete with fuse holder, fuse barrel with metal fitting fuse element mounted on MS Channel. DO fuse set of three Nos. of 11 kV should be erected on the provided channel with vertical mounting expansion type and consisting of base plate post insulators, suitable brace terminal connector conforming to IS 5790 / 1970 with all necessary hardware mounting.br
3
-
-
... More
od159853/2022_2023
Supply of ACSR Racoon conductor of size 6/1/4.09 mm br
60
-
-
... More
od159854/2022_2023
Stringing of ACSR Racoon conductor of size 6/1/4.09 mm on the posts with necessary binding materials etc. as required.
60
-
-
... More
TRANSFORMER AND ALLIED WORKS
-
-
-
... More
od160694/2022_2023
Supply Installation Testing and Commissioning of suitable outdoor type 250 kVA, 11kV/0.433kV, ONAN, Vector group Dyn 11, Transformer including all standard accessories. The degree of protection shall be suitable for outdoor applications. The transformer shall be designed to suit design temperature of 50 degree. The Primary voltage shall be varied by manual off-circuit tap changing, with seven taps from +5 to -10%. Primary terminal shall be suitable for connecting HT 11 kV Al, armoured XLPE cable and Secondary terminal shall be suitable for connecting double run of 3.5c x185Sqmm Alu armoured cable, with cable entry box. All standard accessories shall be provided like, name plate with technical details, lifting hooks, jacking pads, breather, bidirectional rollers, oil and winding temperature indicators etc. Painting shall be carried out as per IS, shade is 631. Impedance of transformer shall be as per IS. The equipment shall satisfy relevant Indian standards/KSEB/Electrical Inspectorate Standards etc. Rate shall be for the complete transformer with connected civil works for transformer plinth etc. The contractor has to submit vendor's general arrangement and scheme drawings along with CPRI certificate and approval and manufacturing clearance to be obtained.br
2
-
-
... More
EARTHING
-
-
-
... More
5.4
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
2
-
-
... More
5.2
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providingmasonry enclosure with cover plate having locking arrangement and watering pipe etc. withcharcoal/ coke and salt as required
6
-
-
... More
od161947/2022_2023
Earthing with G.I. earth plate 1200 x 1200 x 12.5 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
2
-
-
... More
od163613/2022_2023
Providing and fixing earth bus of 50x6 mm GI strip on surface or in recess for connections etc.as required.br
97.63
-
-
... More
od163614/2022_2023
Supplying and laying of 32mmx6mm GI strip at 0.5Mtr below ground as strip earth electrode,including connection/terminating with GI nut,bolt spring,washer etc.as required.(Jointing shall be done by overlapping and with 2 sets of GI nut bolt and spring washer spaced at 50mm).
70
-
-
... More
5.9
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earthelectrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
100
-
-
... More
SAFETY EQUIPMENT
-
-
-
... More
od214964/2022_2023
Supplying of fire bucket painted red & approved quality (Set of 4 buckets)br
2
-
-
... More
od214965/2022_2023
Supplying and fixing carbon dioxide fire extinguisher type 4.5 kg capacity.br
1
-
-
... More
od214966/2022_2023
Supplying and fixing of shock treatment chart.br
1
-
-
... More
od214967/2022_2023
Hand gloves suitable for 11kVbr
1
-
-
... More
od214989/2022_2023
Supplying of first aid box.
1
-
-
... More
od214968/2022_2023
Supply and erection of LT line spacers and all accessories required.br
90
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements