Kerala Industrial Infrastructure Development Corporation Tender

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level: 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, etc. and removal of form for: Foundations, footings, bases of columns, etc for mass concrete

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo - Mechanically Treated bars of grade Fe-500D or more

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with: Cement mortar 1:6 (1 cement : 6 coarse sand)

Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertion etc. (including cost of tail pieces if required) 150 mm diameter Class II

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertion etc. (icluding cost of tail pieces if required ): 200 mm diameter Class II

Providing and fixing C.I double acting air valve of approved quality with bolts, nuts, rubber insertion etc. complete ( including cost of tail pieces, tapers etc. if required): 80 mm dia

Constructing masonry chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design: With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing push - on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket: 200 mm dia pipes

Providing and laying S&S Centrifugally Cast (Spun) / cement lined Ductile Iron Pipes conforming to IS : 8329 : 200 mm dia cement linedDuctile Iron Class K-9 pipes

Providing and laying D.I specials of class K - 12 suitable for push - on jointing as per IS : 9523 : Upt 600 mm dia

Providing and fixing gun metal non-return valve of approved quality (screwed end): 80 mm nominal bore Horizontal

Providing and fixing D.I. / C.I. Non-return valve dual plated PN 1.6 of approved quality with bolts, nuts, rubber fittings etc. complete (including cost of tail pieces, tapers etc if required) : Make Kartar, sant, zoloto 150mm dia Details of cost for one no Gunmetal non-return valve-horizontal (screwed end) 150 mm dia Carriage of materials and fixing charges

Providing and fixing D.I. / C.I. Non-return valve dual plated PN 1.6 of approved quality with bolts, nuts, rubber fittingss etc. complete (including cost of tail pieces, tapers etc if required) : Make Kartar, sant, zoloto 200mm dia Details of cost for one no Gunmetal non-return valve-horizontal(screwed end) 200mm dia Carriage of materials and fixing charges

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work

Providing & Fixing ZINC Aluminium alloy coated colour roof sheet of 0.47mm nominal thickness, cold roll formed from a cold rolled coil confirming to ASTM A 792 M Grade 80 with a minimum uield strenght of 550 MPa. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Design, supply and installation of centrifugal pumpsets of 3 phase electric motor frame with coupling guard and it's fastners, and pumping water from pond including providing, laying jointing suitable dia GI pipe"C" class confirmed as per relevant IS code pump shall be installed at a depth of 5 m from ground level and delivery pipe shall be left 1.50m above ground level as per the instruction of the site engineer. Rate to include cost of pumpsets, GI pipes, provision for the maintenance of the pumps, chain block with pulley etc. complete. The supplier shall give one year guarantee, complete as specified and directed by Engineers's/consultant. (Cost includes extended warranty 5 years beyond recommendation of manufacturer warranty) ,HP : Suitable HP for considering the capacity & Head of pumpsets,Capacity : 31 lps ,Head : 65m,Nominal speed : 2900 rpm, Material of construction: Body : C.I Impeller : Stainless steel Stator : Steel Rotor : Steel Shaft : Stainless steel

Supply,Erection,Testing and Commissioning of Water Treatment Plant

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

Centering and shuttering including strutting, etc. and removal of form for: Foundations, footings, bases of columns, etc for mass concrete

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level: 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo - Mechanically Treated bars of grade Fe-500D or more

12 mm cement plaster of mix: 1:4 ( 1 cement : 4 coarse sand)

Supply, Erection, Testing and commissioning of Sand Filter, for the capacity of 30 m3/hr, having filtration rate of 0.12 m3/hr, size 2.30 m dia x 2.0 m height,Fabricated in MS with epoxy painting inside, outside zinc chrome primer, header, laterals, top bell mouth , ms fabricated frontal piping (Jindal make ‘B’ class pipes) with 5” dia. butterfly valves,40 NB air vent media like, pebbles of different sizes i.e., 2”x1”,1’ x ¾’, ¾’x1/2’, gravel and coarse sand or silex (media: 300bags) without rubber lining and sand blasting.

Supply, Erection, Testing and commissioning of of Activated Carbon Filter for the capacity of 30 m3/hr, having size of 2.30 m dia. x 2.0 m height, fabricated in MS with epoxy painting inside, outside zinc chrome primer, header, laterals, top bell mouth, MS fabricated frontal piping (Jindal make ‘B’ class pipes) with 5” dia. butterfly valves, 40 NB air vent media like, pebbles of different sizes i.e., 2”x1”,1’ x ¾’, ¾’x1/2’, gravel and coarse sand or silex (media: 180bags), and activated carbon of 600 iodine value(coal based, volume : 2000kgs) without rubber lining and sand blasting

Supply, Erection, Testing and commissioning of Feed pump of capacity 35 m3/hr @ 20 m head, centrifugal, monoblock, Kirloskar / equivalent make pump in CI construction

Supply, Erection, Testing and commissioning of Backwash pump of capacity 60 m3/hr @ 30 m head, centrifugal, monoblock, Kirloskar / equivalent make pump in CI construction

Supply, Erection, Testing and commissioning of RHypo dosing system with 2 Nos. of dosing pumps, capacity 10 LPH, electronic diaphragm type in PP construction, with all wetted parts suitable for pumping including cost of valves, pipe and other fittings etc. Make : edose/Equivalent

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work 150 mm nominal inner dia pipes

Electrical

Common Control Panel: Supply,Erection,Testing and Comminssioning of Common Control Panel ,Outdoor type weather proof with canopy ,compartmental type bottom/top cable entry made of 1.6 mm thick CRCA sheet steel dust and vermin proof encloser powder coated and 3.0mm thick CRCA sheet steel gland plate with suitable size of CEIG and IE regulation. Board consist of following rated switch gears. brIncoming: br1 No. CT operated Metering Chamber with meter and CT in sealed chamber; as per KINESCO / KSEB Standards ; 250A cutout fuse,1 No. 250 A MCCB, 1 No. Set TPN AL. Bus bars, 1 No. Multifuntion meter along with 3 Nos,250/5A CL:1.0 ,10 VA Cast Resin Metering CT, R,Y,B LED Indication lamps, 2 A control fuses.etc. complete. Provision shall be made for sealing of all shutters.brBus Bar:br 250A TPN Aluminum Bus Bar, Earth: 25 x 3 mm Aluminum earth stripsbrOutgoing: br1.No. 160 A MCCB,1 No. star delta starter and capacitor suitable for the Pump,1 No. Single phase preventer, Dry running preventer,1 No. Voltmeter, Ammeter along with 100/5 A CT, 1 No. set of ON/OFF Push button,indicating lamps. Remote starting controlling through pressure switch.br 2.No. 100 A MCCB R,Y,B LED Indication lamps,2 A control fuses, necessary control wirings etc. complete with cable chamber for incoming 3.5 Cx150 sqmm cable and outgoing 2 R x3.5 Cx 50 sqmm cable.

Supply of 150 sqmm 3.5 core PVC/XLPE insulated armoured cable with aluminium conductors for working voltages up to and including 1100 volts conforming IS 1584/part I/1988 for PVC IS 7098 part I for XLPE

Supply of 10 sqmm 3 core PVC/ XLPE insulated armoured cable with aluminium conductors for working voltages up to and including 1100 volts conforming IS 1584/part I/1988 for PVC IS 7098 part I for XLPE

Supply of 4 sqmm 3 core PVC/ XLPE insulated armoured cable with aluminium conductors for working voltages up to and including 1100 volts conforming IS 1584/part I/1988 for PVC IS 7098 part I for XLPE

Supply of 1.5 sqmm 2 core PVC / XLPE insulated armoured control cables with copper conductors for working votages up to and including 1100 V conforming to IS 1554 part I 1988 for PVC and IS 7098 Part I for XLPE

Supply of 50 sqmm 3 core PVC/ XLPE insulated armoured cable with aluminium conductors for working voltages up to and including 1100 volts conforming IS 1584/part I/1988 for PVC IS 7098 part I for XLPE

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade offollowing size direct in ground including excavation, sand cushioning, protective covering andrefilling the trench etc as required.Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade offollowing size direct in ground including excavation, sand cushioning, protective covering andrefilling the trench etc as required.Above 35 sq. mm and upto 95 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade offollowing size direct in ground including excavation, sand cushioning, protective covering andrefilling the trench etc as required.Above 95 sq. mm and upto 185 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 10 sq. mm (22mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 50 sq. mm (32mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 150 sq. mm (50mm)

Supplying and making end termination with brass compressionbrgland and aluminium lugs for following size of PVC insulatedbrand PVC sheathed / XLPE aluminium conductor cable of 1.1brKv grade as required. 3 X 4 sq mm

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate withinscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixingthe same in ground as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. withcharcoal/ coke and salt as required