Kerala Electrical And Allied Engineering Company Limited Tender

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15sup0/sup landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.48.1 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm

od271442/2021_2022 : Providing and fixing aluminium work for doors, windows. Including Frame, shutter, 2 side laminted board, brass locks, hinges, handles, all works complete as per instruction from engineer in charge

9.48.2 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc

13.48.3 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

od271440/2021_2022 : Core Cutting RCC with thickness of slab & Beam b/w 120mm to 200mm

od271441/2021_2022 : Masonry wall cutting.

15.57 : Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge

12.53 : Providing and Fixing 15 mm densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture spintone /cosmos /Hexa or equivalent of size 595x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main 'T' runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross "T" of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main 'T' of size 24 x 28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main'T' at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross 'T' of length 600 mm and size 24x28 mm made of 0.33 mm thick (minimum) sheet to be inter locked at middle of the 1200x600 mm panel to from grid of size 600x600 mm, resting on periphery walls/partitions on a Perimeter wall angle pre-coated steel of size (24x24x3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture (Spintone / Cosmos/hexa) in the grid, including cutting / making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever require. Main 'T' runners to be suspended from ceiling using G.I slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size of 85x30x0.8 mm, spaced at 1200mm centre to centre along main 'T' bottom exposed with 24 mm of all T- sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by by engineer-in-charge. Note:- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The calcium silicate ceiling tiles shall have NRC. value of 0.50 (Minimum), light reflection 85% non - combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/m 0 KC.

ELECTRICAL WORKS FOR PNEUMATIC TUBE SYSTEM

1.31 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire

1.14.8 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required4 X 4 sq. mm + 2 X 4 sq. mm earth wire

od272218/2021_2022 : Supply, installation of following types of light fittings with all accessories directly on wall / in existing false ceiling and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required. LED Tube light (20W).

od272219/2021_2022 : Supplying and Installation of suitable size Gl box with modular plate and cover in Front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connection etc.

od272220/2021_2022 : Supply and installation of sheet steel, phosphatized and painted, dust and vermin proof 4-pole enclosure including copper bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB / isolator etc fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall, making good the damages, colour washing etc as required

od272221/2021_2022 : Supply and installation of of 400 mm sweep Wall fan with metallic blade and base along with necessary accessories for fixing etc as required.

1.53.1 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable

od272224/2021_2022 : Supply and fixing CAT6 socket outlets

od272225/2021_2022 : Supply and installation of 3 star inverter type 2 TR 3 star S/T AC unit including outdoor and indoor unit on the existing angle iron frame, fixing of standard length copper refrigerant pipes, making thermal insulation with ready made poly foam tube (thickness not less than 5mm) i/c leak testing, top up of gas giving electrical connections, testing and commissioning etc as required.

od272226/2021_2022 : Supply and laying of 3x 2.5 sq.mm PVC insulated PVC sheathed flexible copper conductor cable and giving connections to indoor/Out door unit etc as required .

1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

2.3.3 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door

2.14.2 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.12.1 : Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.15.2 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.13.1 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

od272227/2021_2022 : Supply and installation of 40A 10KA TP MCB (C curve) with the following accessories suitable for 50 Hz, 240/415 V, AC supply conforming to IS 8828-1995 / IEC 60898-1 of the following current ratings in the existing enclosure / DBs and giving connections as required.

2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole

od272230/2021_2022 : Supply and installation of 20 mm dia good quality ISI mark, 10 kg/cm2, PVC pipe with accessories for protection of refrigerant pipe / drain water connection with necessary clamps etc as required.

od272231/2021_2022 : Supply and installation of MS frame for fixing the outdoor unit

od272232/2021_2022 : Supply and fixing of extra length of copper refrigerant pipe (Both cold & hot line)suitable for 1.5 TR A/C units (beyond the standard length supply with inverter AC) at site i/c insulating with 5mm thick ready made poly foam tube, brazing the pipe ,leak testing and giving connections in 63 mm dia flexible pipe and clamping the pipe etc as required

2.5.2 : Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required .(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)8 way (4 + 24), Double door

90.12.7.39 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 6 sq mm with factory made clamp

Pneumatic Tube System

Tube PVC 160x3,2mm 5m Material: PVC-U Dia 160 mm Colour: RAL 7011 iron grey Meet the standards: DIN6660 and DIN8061/62 Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

Bend PVC 160x3,2 R=800 Material: PVC-U Dia 160 mm Colour: RAL 7011 iron grey Meet the standards: DIN6660 and DIN8061/62 Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

Tube PVC 160x3,2 mm Clear Material: PVC-U Dia- 160 mm Colour: Transparent Meets the standards: DIN6660 and DIN8061/62 Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

Bend PVC 160x3,2 R=800 Clear Material: PVC-U Dia- 160 mm Colour: Transparent Meets the standards: DIN6660 and DIN8061/62 Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

Sleeve PVC 160x3,2x150 Material: PVC-U Dia 160 mm Colour: RAL 7011 iron grey Meet the standards: DIN6660 and DIN8061/62 Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

Сarrier swing lids 160 Red Loading capacity: 123 mm × 350 mm , Dimensions: Loading length (L1): 350.0 mm Total length (L2): 365.4 mm Diameter (D): 123.0 mm Volume: 4.2 litre Weight: 0.8 kg With: High-grade velcro rings Tube dimension Do160 Bend radius r = 650 mm Optional: Felt rings Colours: green, red, blue Equipped with two RFID chips Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

Carrier 160 insert form Foam rubber cap for inserting in carriers 1.9224 / Do110: Has capacity for: 16 tubes each insert One carrier can accomodate two inserts with 32 tubes in total Dimensions: 83 mm × 115 mm Weight: 0.0132 kg Art.no.: 1.9011.6.22 Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

Cable Application: Internal applications, in dry and damp rooms. n × mm²: 2×2×0.22+2×1.95 Outer diameter: 10.2 mm Appr. cable weight: 176 kg/km Cu: 71 kg/km Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

Cable resolver Application: Internal applications, in dry and damp rooms. n × mm²: 2×2×0.22+2×1.95 Outer diameter: 10.2 mm Appr. cable weight: 176 kg/km Cu: 71 kg/km Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

Station 160 Intermediate This through-station can sit in the middle of a chain of stations or at the end. The blower can sit at the bottom or top flange of the station. Carrier is inserted at the top side of the station Can hold one carrier while waiting for departure Carrier visible while waiting Arrival of the carrier from bottom Carriers brake on an in-built column of air Internal two wall bypass turn unit ensures a quiet and reliable operation .The bypass unit is turned into receive position Carrier arrives into bypass unit and is stopped by column of air Bypass unit turns to release position.RFID Enabled Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

Station 160 RECEIVE ONLY This will only recive carriers and has a conveyor belt which moves according the the capsules that shall be recived . Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

CARRIER RAIL Ø110-160 The carriers arrive via a bow onto the reception conveyor belt . They sit on the top side of the belt . The belt motor pulls the carriers If one carrier is removed, the belt will forward the remaining carriers on the belt to create space for newly arriving carriers it Can hold up to 5 carriers Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

EXTENSION CARRIER RAIL Ø110-160 The carriers arrive via a bow onto the reception conveyor belt . They sit on the top side of the belt . The belt motor pulls the carriers If one carrier is removed, the belt will forward the remaining carriers on the belt to create space for newly arriving carriers it Can hold up to 5 carriers Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

Diverter 160 2/3/4-way Can be used as 2-3 or 4-way diverter S-bend (swivel tube) construction Hall position sensor controlled safe snap of the swivel tube into correct positions All functions can be checked directly at the diverter Absolutely suction and pressure tight Suitable for carriers up to 420 mm MTBF 8 years Technical properties Material: Sheet-steel case, plastic-covered, with PVC and ABS parts inside Colour: Powder coated, white-grey, appr. RAL 7035 Tube: Do160 (1.0395.T.0F) / Do200 (1.0395.V.0F) Housing: 1.0395.T.0F: ca. 770 mm (h) × 500 mm (w) × 353 mm (d) 1.0395.V.0F: ca. 1165 mm (h) × 606 mm (w) × 442 mm (d) Weight: 1.0395.T.0F: ca. 28 kg Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

Main Control Unit Two way Application: For System H61F and H61G Characteristics Controls up to nine zones or one revolver and eight zones The internal power supply with 250 W can supply 20 stations and diverters Input voltage 100 to 240 VAC Housing: Protection Class: IP20 Dimensions: 350 mm (w) × 320 mm (h) × 155 mm (d) Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

Power Supply Unit Characteristics Bridge refreshes the bus signals Data uplink to previous bus segment is insulated Power-off follows previous power supply Bridge card is an addressable component for maintenance The internal power supply with 250 W can supply 20 stations and diverters Input voltage:100 to 240 VAC Output voltage: 48 V Housing Protection class: IP20 Dimensions: 350 mm (w) × 320 mm (h) × 155 mm (d) Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

Starter Unit, DC3 3-Phase Blower Characteristics 400V With break relais Options characteristics blower(1.2541.0.06) Twoblowers(1.2543.0.06) Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

Junction Box (3-phase) Junction boxes protect the electrical connections from the weather, as well as protecting people from accidental electric shocks Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

Blower 2.2 KW Characteristics Side channel blower with 2.2 kW at 50 Hz or 2.55 kW at 60 Hz Maximum volume and pressure see table Installation At wall, at ceiling, or at bottom Motor axis can be horizontal or vertical Motor IE2 Connection to 3×220V or 3×400V Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

Air Reversing Valve Materials: sheet-steel case,b l ack powder inside ABS nd PVC p arts Dim ensions: Tu e: DN110 Housing: 300 mm (h) × 330 mm (w) × 265 mm(d) weight:9 kg Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

Silencer Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

Carrier Damping device 160 Purpose n Storing of up to five carriers beside the station Technical properties Material: steel wire Colour: powder-coated, light-grey, RAL 7035 Tube: Do160 Dimensions: 58 mm (h) × 14 mm (w) × 15 mm (d) Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

Tube PVC 110x2.3 mm 2.5m Material: PVC-U Dia 110 mm Colour: RAL 7011 iron grey Meet the standards: Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

Elbow 110x2.5 R=85 Material: PVC-U Dia 110 mm Colour: RAL 7011 iron grey Meet the standards: Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

Sleeve PVC110 Material: PVC-U Dia 110 mm Colour: RAL 7011 iron grey Meet the standards: Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

Glue PVC Tangit 125g For bonding thermoplastic pressure pipe systems made of rigid PVC acc. to EN 1452. Suitable for pressureless pipe systems (draining of sewage) acc. to EN 1329. For installation and repair work Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

PC Hardware Supervision/Multiline/ RFID for (1) Line It is a hardware used to install the software for monitoring the system performance and actual state of the systema dn identifiy the error Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

PC Software Supervision/Multi-line, Basic, (First Line) App Based Modualr Software. Used to supervise penumatic tube system. Displays the status of the system as well useful statistics and system usages. Helps to improve the efficiency of the systemand to identify the errors at early stages. History App, Device State APP,3D grapics App, programmer App. Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

Tube clamp type 1 110 With a sound absorbing insert and resistant to ageing for DIN 4109 with a safety lock for quick and practical installation with an insert especially for tubes made of PVC I48after having removed the distance ring the tube clamp also can be used as locating clamp The tube clamp is made of steel 1.0332 and is plated electrolytic We can deliver this clamp for the tubedimensions Do63 – Do160. The picture shows the tube clamp with a socket bolt-wood screw M10 for the fixing Make: HITECH/MODCON/KAMAL METAL Country Of Origin: INDIA/ASIA

Tube clamp type 1 160 with a sound absorbing insert and resistant to ageing for DIN 4109 with a safety lock for quick and practical installation with an insert especially for tubes made of PVC I48after having removed the distance ring the tube clamp also can be used as locating clamp The tube clamp is made of steel 1.0332 and is plated electrolytic We can deliver this clamp for the tubedimensions Do63 – Do160. The picture shows the tube clamp with a socket bolt-wood screw M10 for the fixing Make: HITECH/MODCON/KAMAL METAL Country Of Origin: INDIA/ASIA

Stripe 445*4, 8mm black[ cable tie] Material: Polyamid 6.6 Available dimensions: 368mm×4.8mm,DN63/DN80(7.6700.3.60 ) 450mm×8.0mm,DN108/DN110(7.6700.4. 50) 550mm×8.0mm,DN132(7.6700.5.45) 762mm×9.0mm,DN160/DN200(7.6700.7. 50) Make: HITECH/MODCON/KAMAL METAL Country Of Origin: INDIA/ASIA

Station basket large (445x530x450) Basket Material: steel wire / steel plate Colour: powder-coated, light-grey, RAL 7035 Dimensions: 450 mm (h) × 340 mm (w) × 300 mm (d) Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

Sandbag for basket (380x300x30) Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

ATX END STATION Carrier Departure : Sending upwards Carriers are inserted at the bottom of the station Can hold three carriers while waiting for departure Carriers visible while waiting Overload protection Each send slot can have a different destination address Operation : Internal s-bend design ensures smooth operation S-bend moves over the carrier to be sent Carrier departs and activates a sensor to command s-bend into a intermediate position between send slots Location This station has to be connected to a diverter. Technical properties Material: Sheet-steel case with PVC and ABS parts inside Colour: Powder coated, white-grey RAL 7035 Tube: Do160 Housing: ca. 776 mm (h) × 507 mm (w) × 365 mm (d) Weight: ca. 34 kg ESD protected RFID Enabled Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

Transfer Revolver - TRANSFER ZONE Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

KIT - V- FLANGE- TRANSFER ZONE Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

V- FLANGE FOR ZONE CONNECTION- TRANSFER ZONE Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

INBUILD CABLE DO 160- TRANSFER ZONE Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

CENSORING UNIT- TRANSFER ZONE Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

CONVEYOR BELT- TRANSFER ZONE Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

KIT X2 EXTENSION CARD- TRANSFER ZONE Make: Hortiq/Sumetzberger/Swislog Country Of Origin: EUROPE/USA

GRAND TOTAL

EXCLUSIVE OF GST

Note :1 All materials, Items, Equipment shall be best branded items with IS and approved by client/KEL

2:Rate should be inclusive of Insurance,Transportation, delivery and installation cost for all items

3.Rate should be Exclusive of GST.

4.Work should be executed as per DSR/PWD specification and direction of Engineer at site.

5.CEMENT: Make use Malabar cement only as per Govt. direction and in case of non availabilty of Malabar cement use Ultra Tech, Dalmia, Ramco or eq. brand in the order of preference.

6.RCC: (Assessment of strength of concrete by Cube testing at Approved Govt labs as per IS) Cement make: Use Malabar cement only as per Govt. direction and in case of non availabilty of Malabar cement use Ultra Tech, Dalmia, Ramco or eq. brand in the order of preference.

7.STEEL REINFORCEMENT: Make: Tata,Vaishak, SAIL, JSW or eq primary make in the order of preference

8.CENTERING & SHUTTERING: (Centering and shuttering for different category of work may be considered separately.)

9. SOLID BLOCK MASONRY: Min. average compressive strength as per IS shall be 40-50kg/cm2 and has to be assessed by testing at Govt. lab. ( Variation in rate due to change in size of block and level of floor as per DSR/PRICE has to be considered)

10.PLUMBING & SANITARY FITTINGS: Note: Make of Water supply and sanitary items: Best branded ISI make Jaquar, Cera, Hindware, Parryware or eq. in the order of pref. Water pipe: Supreme, Finolex or eq. with IS and all fittings with IS.

11.ELECTRICAL: Note: Rate should be inclusive of preparation of schematic diagram and getting approval from KSEB/Electrical Inspectorate. Statutory fees paid to KSEB/EI shall be paid by us separately.

Make of Electrical equipments/materials

All electrical materials/equipments shall be of best branded items with ISI, strictly as per schedule specification

MCB/ELCB/DB - L&T/LEGRAND/SCHNEIRDER or equivalent

6.VETRIFIED FLOOR TILES/ CERAMIC GLAZED WALL TILES: Make: Khajaria, Jhonson, RAK, NITCO, Cera or Eq. in the order of preference and prior sample approval from KEL, Client

15.ALUMINIUM WORK: Make: INDAL, JINDAL in the order of preference and prior sample approval from KEL, Client

9. ACRYLIC SMOOTH EXTERIOR PAINT/ SYNTHETIC ENAMEL PAINT/WHITE CEMENT BASED PUTTY/ CEMENT PRIMER: Make: Asian, Berger, Nerolas or eq. in the order of pref.