Kerala Electrical And Allied Engineering Company Limited Tender

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

50.6.7.1 : Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc.

8.2.2.2 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm

16.68 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.48.1 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm

Equipments

od227901/2024_2025 : STEP TRAINER<br>Specification :<br>Main frame: 100 NB G.I B-Class pipes -Jindal make<br>Foot Rest pipe: 40 NB G.I B-Class pipe Jindal make<br>Foot Rest: LLDP Roto moulded seat with inbuilt bolts 3/8" x 1.5"<br>Handle: 40NB & 25 NB G.I B-Class pipe Jindal make<br>Handle cover: Nylon 66 injection moulded.<br>Bearings: Reputed make (FAG/SKF)<br>Pipe Cap: Galvanized cap.<br>Nut bolts: Galvanized nut bolts<br>Nut bolts cap: Nylon 66 injection moulded with SS M6 fasteners.<br>Powder coat: Done by first coat of Primer – Jotun Brand 40-50 micron thickness and top coat of pure<br>polyester powder with 70- 80-micron thickness. Total thickness is 110-120 micron.

od227919/2024_2025 : LEG LIFTER ( Specification : area 2.7’ft*2.4’ft Safe area:6.7’ft*6.4’ft<br>Centre pipe:100 NB G.I B-class pipe, Seat frame:32 NB G.I B-class pipe, Leg lever-32 NB G.I B-class pipe, Seat& back rest: LLDPE Roto moulded seat with inbuilt bolts 3/8”*1.5” Handle cover: Nylon 66 injections moulded. Power coat: First coat done of primer- 40-50 micron thickness is 110-120 micron.)

od227920/2024_2025 : CHEST PRESS CUM AIR WALKER CUM STANDING TWISTER<br>(Specification : Center frame is 100 NB G.I c-class pipe, Top frame 40 NB&32 NB G.I b-class pipe, Handle frame: 32 /NB& 25 NB G.I b-class pipe, Connecting pipe:32 NB&25 NB&40 NB G.I b-class pipe. Seat& back rest- IIdp rotomoulded seat with inbuilt bolts 3/8”*1.5”. Stopper: Pu rod.50 mm dia. Main frame:100 NB G.I c-class pipe leg frame:32 NB G.I b-class pipe Handle frame:25 NB G.I b-class pipe Clamps: Nylon 66 injection moulded casing Foot Rest: LLDP roto moulded seat with inbuilt bolts 3/8" x 1.5" Seat frame:32 Seat frame:32 b-class pipe Handle frame:20 NB G.I bclass pipe Twister disc: lldp roto moulded seat with inbuilt bolts 3/8" x 1.5" Pipe cap: galvanised cap. Bearing cap: cap for 100 NB- Nylon 66 injection moulded. Bearing housing and pin: seamless pipe& round bar Bearings: Permanent sealed of reputed make (FAG/SKF) Nut bolts: Galvanised nut bolts Nut bolts cap: nylon 66 injection moulded with ss m6 fasners. Powder coat: Done by first coat of Primer –40- 50 micron thickness and top coat of pure Polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron.)

od227925/2024_2025 : CYCLE<br>( Specification : Area: 2ft X 2ft of main frame made of 40NB GI B class pipes and seat frame is 40 NB GI B class. Roto moulded moulded seat and handle frame .Bearing housing and pin is seamless pipe and round bar . Galvanised nut bolts and galvanized pipe cap is used. Nut bolts cap are made up of SS washer cap. Self lubricating bearing is used .Powder coat is top coat of pure polyester powder with 70-80 micron thickness.)

od227927/2024_2025 : ABBS TRAINER<br>( Specification : area 5.7’ft*2.1’ft Safe area:9.7’ft*6.1’ft .<br>• Main Frame is made up of 40 NB & 32 NB GI B Class Pipe<br>• Stiffener is made up of 25 NB GI B Class Pipe.<br>• Foot Lock is made up 50 NB GI B Class Pipe<br>• Abb Trainer Top is made up of LLDPE Plastic<br>• Size of Top will be 375 mm x 1150 mm x 40 mm thick.)

od227928/2024_2025 : DOUBLE SKY TRAINER<br>( Product Area : 3.4'Ft x 2'Ft<br>Main frame: 100 NB G.I B-Class pipe. -Jindal make<br>Foot Rest pipe: 40 NB G.I B-Class pipe -Jindal make<br>Handle: 40NB & 25 NB G.I B-Class pipe -Jindal make<br>Connecting pipe: 25 NB & 40 NB G.I B-Class pipe -Jindal make<br>Foot Rest: LLDP Roto moulded with inbuilt bolts 3/8" x 1.5"<br>Pipe Cap: Galvanised cap.<br>Bearing Cap: Cap for 100 NB -Nylon 66 injection moulded.<br>Bearing housing and pin: Seamless pipe & Round bar<br>Bearings: Reputed make (FAG/SKF)<br>Nut bolts: Galvanised nut bolts<br>Nut bolts cap: Nylon 66 injection moulded with SS M6 fasteners.<br>Powder coat: Done by first coat of Primer – Jotun Brand 40-50 micron thickness and top coat of pure<br>polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron)