Kerala Agricultural University Tender

od1957/2021_2022 : Roofing with Pre-laminated aluminium-zinc (galvalum) trafford sheet of 0.45mm or nearest available thickness with overlap of 150mm ends self drilling screw/cranks bolts as per direction of departmental officers including plain washers and bitumen washers etc.complete.

od1958/2021_2022 : Ridge copping with pre- laminated aluminium -zinc (galvalum) trafford sheet of 0.45mm or nearest available thickness with overlap of 150mm ends self drillingsteel screws /cranks bolts as per

od1961/2021_2022 : Providing and fixing ornamental square type PVC rain water , gutter 150 mm or nearest size and special bracket doped outlet etc. including all cost of material etc. complete

14.1.2 : Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:Cement mortar 1:4 ( 1 cement: 4 coarse sand)

13.83.2 : Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.Two coats

13.111.1 : Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.99.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

od1831/2021_2022 : Providing and fixing Ceiling with Extruded polythene thermal insulation board 20mm thick(595mmX595mm)in true horizontal level, suspended on an interlocking metal grid of hot-dipped galvanized steelsections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mmcenter to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at the middle of the 1200x600 mmpanel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling with Extrudedpolythene thermal insulation board approved texture in the grid including, required cutting/making, opening forservices like diffusers, grills, light fittings, fixtures, smoke detectors, etc. Main "T" runners to be suspended fromceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to the ceiling with 12.5mm dia and 50 mm long dashfasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mmcenter to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyesterpaint, the exposed face of polythene thermal insulation board shall be painted with Acrylic Smooth interior paint of twocoat of required shade over a priming coat etc. all complete for all heights as per specifications, drawings and asdirected by Engineer -in-charge.

od2007/2021_2022 : Providing and fixing V Board board of thickness 8mm or nearest size-approved quality on walls with screws etc complete.

11.47.2 : Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer,in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm

11.47.3 : Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer,in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 800x800 mm

9.144 : Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100 mm x 37 mm with wall thickness 2 mm ( ± 0.2 mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos of plastic brackets of size 75 mm x 220 mm at each corners by means of 2 nos of plastic brackets of size 75 mm x 220 mm at each corner and stainless steel screws, reinforcing the hinge side of style by inserting corner and stainless steel screws, reinforcing the hinge side of style by inserting PVC profile of size 28 mm x 30 mm, with wall thickness 2 mm ( ± 0.2 mm). Lockrail of size 100 mm x 37 mm, wall thickness 2 mm (± 02. mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100 mm x 20 mm, and inserting 2 nos tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturer's specification and direction of Engineer -in- charge.

9.145 : Providing and Fixing factory made PVC door frame made of PVC extruded sections of size 75 mm x 53 mm, having wall thickness 2.0 mm (± 0.2 mm) Both vertical sides of the frame reinforced with PVC profile of cross section size 28 mm x 30 mm x 2 mm thickness (± 0.2 mm ) and 75 mmx 200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut jointed and fusion welded together, including providing and fixing 3 nos of 125 mm long stainless steel hinges to frame, fixing the frame with jamb with required nos & sizes of anchor dash fastener, all complete as per manufacturer's specification and direction of engineer-in-charge.

od1959/2021_2022 : Supplying and fixing good quality 150mm stainless steel tower bolt with stainless steel screw(heavy-duty)

od1960/2021_2022 : Supplying and fixing good quality 250mm Stainless steel Aldrop(heavy-duty)

9.66.2 : Providing and fixing ISI marked oxidised M.S. handles conforming to IS : 4992 with necessary screws etc. complete:100 mm

od1835/2021_2022 : Carpenters engaged for repair works of doors, windows and ventilators etc complete.

od1962/2021_2022 : Man mazdoor engaged for assisting carpenter and cleaning the premises etc complete.