Kerala Agricultural University Tender

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

50.6.2.1 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

od32/2023_2024 : White cement priming coat over newly plastered surface and cleaning the surface

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

4.3.1 : Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

12.1.3 : Providing corrugate G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/m2

od33/2023_2024 : supplying aluminum channel with triple spring locking of 0.90 mm thick with smooth edges, 190 gm/ m and fixing to the frame with 20 mm long self drilling screws@30cm c/c,including all cost of labour and materialas etc. complete.

od34/2023_2024 : supplying and fixing 25% agri shade net of best quality as specified and tying using micro tube to the frame already fixed and paid separately as per the direction of the deptl. officers.

od35/2023_2024 : supplying and fixing UV film of 200 micron of best quality and fixing to the frame already fixed using aluminium extruded channels (which are paid separately)as per the direction of departmental officers

od36/2023_2024 : supplying and fixing GI Zig zag spring for fixing UV film/ shade net using aluminum profile which is already fixed and paid separately

od37/2023_2024 : supplying and fixing good quality Weed mat to reduce weeds growth, reduces herbicide usage, strong and durable complete

od38/2023_2024 : supplying and fixing four way fogger emitters with gi wire and leak proof snap, fit joint, fine droplets of average 70 micrones 5.4lph artoperating pressure 3.5 bar

od39/2023_2024 : supplying and fixing Screen filter 2" (NETAFIM) Or ISI equivalent valve 120 mesh(short) 20 or nearest cum/hr capacity along with pressure gauge, control valve etc. including essential accessories complete.

od40/2023_2024 : supplying and fixing LLDPE 16mm dia including gromet, nipple, end cap, gi wire 12G for supporting lateral pipes & hanging foggers etc.

od41/2023_2024 : supplying and fixing PVC Ball Valve 40mm

od42/2023_2024 : supply & Installation of 1.5Hp mono block pump set with head 21 to 24 mtr including MCB or starter board complete

od43/2023_2024 : micro-Sprinkler (Finolex plasson or equivalent quality) head upto 2.4m part and full circle models-with 1/2" male threaded inlet.

50.18.9.3.2 : Providing and fixing PVC pipes includes jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm dia 10KGF/cm2

50.18.9.5.2 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints compete as per direction of Engineer in Charge. 40 mm dia 6 Kgf/cm2

od44/2023_2024 : fencing with GI chain link of size 7.5X7.5cm-10g X10g of standard pattern fixed with GI wire to the post and run GI plain wire no.10 through the top, middle and bottom of chain link and including all cost of materials and applying a priming coat etc complete.