Irrigation Department Tender

OD40072/2023-2024:Supply and Installation of MAPS 71 with Product Area : 22ft X 20ft, Safe Play Area : 28ft X 27ft, age Group : 5-12 yrs, friends at a time : 12, platform Height : 5ft with technical Specification: Platform:-Material:- FRP (Fiber Reinforced Plastic) with anti-skid surface on top with minimum thickness of 3-5 mm and side flanges of 6-8 mm thickness center to center distance 1160mm, Others:- Ribbed structure on bottom side Shape:- Hexagonal Brazing Frame:- ISA 25x25x5mm thick and ISF 40x5mm thick which is galvanized and then duly Powder Coated, clamp:- made by Nylon 6 material by Injection Molding Process, vertical Pipes:- 100NB GI pipes, wall thickness as per the class of pipe used FRP Ladder 5ft:- Size:- 5 Ft, material:- FRP (Fiber Reinforced Plastic) with a minimum thickness of 3-5mm, the ladder supported by stand made up of 25NB G.I. pipe and 50x10mm thick flat from the bottom, roto double Wave Slide 5’ht: ROTO Double Wave Slide is made up of LLDPE by Rotational Molding Process, landing of the slide is supported by stand made up of 20 NB pipe and 5mm thick MS plate with GI plating, ROTO Spiral Slide With Slide Entry:- The slide is completely made up of one piece with a thickness of 5- 8mm keeping in consideration the ASTM & EN standards with material used is LLDPE (Low- Density Polyethylene Plastic) in rotational molding process, The entry module of the slide is different from the other as it looks like as if going through a tunnel and then sliding through the slide.It is made from LLDPE (Linear Low Density Polyethylene) by Rotational molding process and aseembled with pipe and clamp to deck pipe. Roto spiral slide entry support part is combination rectangular pipe and GI plate. Handle grip of 20NB conforming to EN 1176-1:1998 attached with Nylon clamp of Grade-6 clamped to the Deck pipe using SS304 graded non rusting nut-bolts Cat Railing:- Railings are provided on both sides of bridge as barrier for safety purpose. It is made up of LLDPE (Low-Density Polyethylene Plastic) in rotational molding process and has a support of 20 NB powder coated GI pipes. The railing is attached to the support pipe using an Injection Molded Nylon Clamps. Bubble Panel Railing:- In this type of railing the bubble is made up of acrylic and the frame is made up of LLDPE (Low-Density Polyethylene Plastic). It provides an outer view of the area to the person present on that MAPS deck. It has been supported with a 20 NB powder coated GI pipes. The railing is attached to the support pipe using an Injection Molded Nylon Clamps. Abacus Railing:- 3 The balls for Abacus Railing and the frame are made of LLDPE (Low-Density Polyethylene Plastic) in rotational molding process. The frame is fixed on 20 NB GI pipes. The pipes are powder coated. The balls are attached over 12 mm dia rod to the frame. MAPS Single Swing:- In the single swing the leg support is made up of 40 NB GI pipes and top pipe is of 50 NB GI pipes with GI junction box with powder coating. The swing seats are made up of 10mm thick anti- skid chequered reinforced rubber top. The rubber belt seat is suspended on 6mm rubber coated GI chain. The ball bearings are mounted inside a specially designed nylon clamp. FRP HexagonalCanopy:- The Hexagonal canopy is made of FRP (Fiber Reinforced Plastic) with a minimum thickness of 2-3 mm. The canopy is assembled from six modules and at the top flag is fixed. ROTO Flag:- This ROTO Flag is made up of rotational molding process which consists of LLDPE mixed with UV stabilized food grade material for making it UV resistant. FRP (FIBER REINFORCED PLASTIC):- All the Fibre Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. We use International quality Gel coats which are duly mixed with U.V 16 stabilized pigment to give the required color to the product. Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test). LLDPE (LINEAR LOW DENSITY POLYETHYLENE):- The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform 4 thickness & durability. Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron. Powder coating: It shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50- 70 microns. It is tested for adhesion test (According to ASTM- D-3359) with the help of cross hatch cutter instruments. Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color: Multicolor or similar specifications approved by departmental officers at site,

OD40073/2023-2024:Supply and Installation of SIMPLY GO ROUND Descriptions • Product Area : 1.2m Dia ( 4 ft Dia.) • Safe Play Area : 2.1m Dia ( 7ft Dia.) • Ideal For : 2-5Years • Friends at a time : 5-6 Technical Specification: •Railings :Railings which are designed conforming to EN 1176- 1:1998 for standard grip requirement, are made from 25NB Galvanized Pipe with GI thickness of 60μ. Railing frame conforming to EN 1176-1:1998 for safety against entrapment of head & neck. The Frame (2 Nos.) are fixed to the HDPE sheet platform reinforced structure. •Platform :High Density Polyethylene (HDPE) Platform Dia.1200, thickness 15 mm have high specific strength. •Platform support frame :Frame bolted with HDPE Platform for its rigidity, made from 25 NB Cross pipe welded together to a 25NB Bend pipe to form a structural frame. •Bearing assembly :Bearing assembly with two bearings 1. Ball Bearing used for smooth rolling action. 2.Taper Roller Bearing take vertical thrust due to rolling moment & applied weight. The bearing assembly is fixed to the center support stand and the platform support frame assembly is mounted over it. •Center support : 80NB hot dip galvanized center support pipe of length 500mm with GI thickness of 60μ .This pipe is welded with a 150x150mm base plate at bottom for fixing the foundation angles ISA & Circular plate on top with OD 200mm for assembling the bearing. •Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI 1NO 37,491.00 37,491.00 8 thickness of 60micron. •Pipe Materials or Class: Light Duty ('A' Class) & Medium Duty ('B' Class) Series of pipes only. Wall thickness of pipe varies according to class /series of pipe used. •Powder coating: It shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM- D-3359) with the help of cross hatch cutter instruments. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. : Colour or similar specifications approved by departmental officers at site,-

OD40074/2023-2024:Supply and Installation of ANIMAL GO ROUND Descriptions • Product Area : 2.1m Dia (7 ft Dia.) • Safe Play Area : 3.1m Dia (10.2 ft Dia.) • Ideal For : 3-12 Years • Friends at a time : 4 Technical Specification: •MGR frame : MGR Frame made from 40NB pipes welded together with bottom end over a circular plate meant for assembling bearing assembly. The top end of the pipe is welded with a ISF & a plate for mounting the animal (duck) over it. The four 40NB pipe are hold together with four 25NB pipe to form a strong structure. •Bearing assembly :Bearing assembly with two bearings •Center support : 80NB hot dip galvanized center support pipe of length 500mm with GI thickness of 60μ .This pipe is welded with a 150x150mm base plate at bottom for fixing the foundation angles ISA & Circular plate on top with OD 200mm for assembling 1NO 34,875.00 34,875.00 9 the bearing. •Foot rest : Foot rest made from 15NB Galvanized pipe with end caps welded to two plates forming a foot rest. •Duck : Duck is made out of molded plastic in rotational molding process . •Rotational Molded Products :The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability. •Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness upto 60micron. •Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instruments. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color:or similar specifications approved by departmental officers at site,

OD40075/2023-2024:Supply and installation of NET ROCK SCRAMBLER 5FTDescriptions• Product Area : 2.0m x 1.5m (6.6ft x 5ft)• Safe Play Area : 3.0m x 2.5m (9.8f x 8.2ft)• Age Group : 4-12 yrs• Friends at a time : 3-4 Technical Specification:• Pad:Rock climber 5Ft. pad made from Fiber Reinforced Plastic (FRP) attached to the angular frame. The pad is provided with rock shaped part ergonomically spaced in zig-zag manner for climbing act. The rocks are bolted on same platform, with a gradient of 65 degree from the ground.• Supports: Bend angular frame made from 40NB Galvanized pipe fixed and grounded for strong foundation. It has U-hook on one side for attaching rope.It has profile plate for top support.• Top pipe: It is made from 40NB top pipe of 1190mm long with U-Hooks fixed on one side. • Rope: Rope size conforming to standards En 1176-1:1998 for minimum grip requirement. It is size of Ø16 of nylon. Mesh size conforming to standards EN1176-1:1998 & ASTM- F1487:07a for safety against entrapment of head & neck• Clamp: Its is made from nylon. nylon rope attached by specially designed nylon rope clamps used which has rope integrated inside which hold it tightly and avoids breaking.• Bottom pipe: It is made from 40NB bottom pipe of 1190mm long with U-Hooks fixed on one side.• Rock:It is made from Fiber Reinforced Plastic (FRP).• Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron.• For “FRP (FIBER REINFORCED PLASTIC):-All the Fibre Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required colour to the product. Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test).• Powder coating: shall be done of pure polyester exteriors ultra- stabilized powder Paints. Thickness maintained is a minimum of 60-70microns.• Nut and Colour or similar specifications approved by departmental officers at site,-Bolts: Galvanized/S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety agains entrapment. Colour or similar specifications approved by departmental officers at site,-

OD40076/2023-2024:Supply and Installation of FRP ROLLER SLIDE 5FTDescriptions• Product Area : 5.6m x 1.0m (18.4ft x 3.3ft)• Safe Play Area : 6.6m x 2.0m (18.7ft x 6.6ft)• Age Group : 4-10 yrs.• Friends at a time : 4 to 5 Technical Specification: • Small H-Support: It is made from 25NB GI Pipe length 600mm with 10mm tor rod of length 300 mm for support & strong foundation• Center Support pipe: 80NB hot dip galvanized Deck pipe of length 1980mm with GI thickness of 60 microns• Ladder Frame: The slide ladder is made up of 25 NB GI pipe & the ladder hand-railing is made up of 15 NB and 20 NB pipes respectively.• Ladder Step: Cold formed 16 Gauge GI Plated Sheet Length 500mm & width 90mm EN1176- 1:1998 conforming to EN1176- 1:1998. The trade and riser of the ladder are designed in such a way it won’t entrap child’s foot while playing. All the sharp edges and corners are properly grinded to give smooth finish so that children are not hurt while playing on it.• Platform: It is 16 SWG GI Plated Platform of size - 500x450x60mm• Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron.• FRP Roller Slide landing: It is FRP Roller Slide landing with support flanges of ISA conforming to standards IS-808-1964 & it is made up of Fiber Reinforced Plastic (FRP)• FRP Roller Slide side arm: It Is made up of Fiber Reinforced Plastic (FRP) with reinforced pins for assembling the rollers• FRP Roller Slide top: It Is made up of Fiber Reinforced Plastic (FRP)• Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron.• Roller: It is made from LLDPE (Linear Low Density Polyethylene) Material. The most attractive and enjoyable of its kind, the slide chute consists of molded plastic rollers spread over the length. It is made in rotational molding.• For Roto product: The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect lend of uniform thickness & durability.• For FRP product: All the Fiber Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required colour to the product. Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test).• Powder coating: It shall be done of pure polyester exteriors ultra- stabilized powder Paints. Thickness maintained is a minimum of 60-70 microns.• Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Color:Colour or similar specifications approved by departmental officers at site,- Multicolor for optional orcustomized Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: Colour or similar specifications approved by departmental officers at site,-

OD40077/2023-2024:Supply and installation of DISC CHALLENGER (PGTH-01) Descriptions• Product Area : 4.5m X 1.1m (14.8ft X 3.6ft)• Safe Play Area : 5.5m X2.1m (18ft X 7ft)• Ideal For : 5-12 Years• Friends at a time : 5-6 Technical Specification:• Vertical support : 80NB Pipe welded together with a flange to form a strong frame withstand both the pitching & yawing moment. The 80NB pipe is hot dip galvanized pipe of height 2950mm with GI thickness upto 60μ.• Top frame : 80NB Pipe welded together with a flange to form a strong frame withstand both the pitching & yawing moment. The 80NB pipe is hot dip galvanized pipe of height 4380mm with GI thickness upto 60μ. • Clamps : Two 80x20 sized clamps joined together to two 80NB clamps with non rusting nut -bolts made from Nylon Grade-6 plastic.• Chain : Hot Dip Galvanized chain of dia 8mm and length 330mm to resist movement of pad in vertical direction & allowing motion of pad in bi-axial direction.• S hook : S-HOOK is made up of SS 304 material which is used for mounting the disc’s to the clamps provided at the top pipe and also for clamping it with chain.• Disc pad : The disc pads are made in rotational molding. The pad is fitted onto MS circle of 5 mm thick with GI plating. The plate is grounded with a GI chain and 25 NB GI pipes attached to it.• Rotational Molded Products : The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UVstabilization of Food Grade Non Hazardous Plastic . Thickness of the ROTO products varies from 5 mm to 8 mmas per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability.• This product is so designed so as to develop physical well being of the child and to increase physical abilities.• Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness upto 60micron.• Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instrument.s.• Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: ISO9001:2015 Color: Multicolor for optional or customized & according to RAL shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. Colour or similar specifications approved by departmental officers at site,-

OD40078/2023-2024:Supply and Installation of BIRD BIN(PGGD-11)Descriptions • Product Area : 0.3m Dia. (1.3ft Dia.)• Height : 0.6m (2.25ft)• Capacity : 68 Ltrs Technical Specification:• Bird Bin : Bird bin is made up of Fiber reinforced plastic(FRP).This innovative bird dust-bin is designed for accomodating dry as well as wet kind of trash in the garden or public places.The bird dustbin has shape, size and parts that of a bird which looks like a real bird and the trash can be put through inside the mouth of the bird.• FRP products :All the Fibre Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required colour to the product.Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test). Colour or similar specifications approved by departmental officers at site,-

OD40079/2023-2024:Supply and installation of FISH BIN Descriptions• Product Area : 0.3m Dia. (1.3ft Dia.)• Height : 0.7m (2.6ft) • Capacity : 84 Ltrs Technical Specification: • Fish Bin : Fish bin is made up of Fiber reinforced plastic(FRP).This innovative fish dust-bin is designed for accomodating dry as well as wet kind of trash in the garden or public places.The fish dustbin has shape, size and parts that of a fish which looks like a real fish and the trash can be put through inside the mouth of the fish.• FRP products :All the Fibre Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type.We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required colour to the product.Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test)b. Color or similar specifications approved by departmental officers at site,-

OD40080/2023-2024: Supply and installation of FROG BINDescriptions• Product Area : 0.6m Dia. (2ft Dia.)• Height : 0.8m (2.8ft)• Capacity : 84 Ltrs Technical Specification:• Frog Bin : Frog Bin is made up of Fiber reinforced plastic(FRP).This innovative frog dust-bin is designed for accomodating dry as well as wet kind of trash in the garden or public places.The Frog dustbin has shape, size and parts that of a frog which looks like a real frog and the trash can be put through inside the mouth of the frog.• FRP products :All the Fibre Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required colour to the product.Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test).Certificate: Colour or similar specifications approved by departmental officers at site,-

OD40081/2023-2024:Supply and installation of S LOOP CLIMBER Descriptions• Product Area : 4.5m X 1.1m (14.8ft X 3.6ft)• Safe Play Area : 5.5m X2.1m (7ft X 12ft)• Ideal For : 5-12 Years• Friends at a time : 5-6 Technical Specification:• Vertical support : 80NB Pipe welded together with a flange to form a strong frame withstand both the pitching & yawing moment. The 80NB pipe is hot dip galvanized pipe of height 2950mm with GI thickness upto 60μ.• Top frame : 80NB Pipe welded together with a flange to form a strong frame withstand both the pitching & yawing moment. The 80NB pipe is hot dip galvanized pipe of height 4380mm with GI thickness upto 60μ.• Clamps : Two 80x20 sized clamps joined together to two 80NB clamps with non rusting nut -bolts made from Nylon Grade-6 plastic. • Chain : Hot Dip Galvanized chain of dia 8mm and length 330mm to resist movement of pad in vertical direction & allowing motion of pad in bi-axial direction. • S hook : S-HOOK is made up of SS 304 material which is used for mounting the disc’s to the clamps provided at the top pipe and also for clamping it with chain. • Disc pad : The disc pads are made in rotational molding. The pad is fitted onto MS circle of 5 mm thick with GI plating. The plate is grounded with a GI chain and 25 NB GI pipes attached to it. • Rotational Molded Products : The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic . Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability.• This product is so designed so as to develop physical well being of the child and to increase physical abilities.• Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness upto 60micron.• Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instrument.s.• Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Colour or similar specifications approved by departmental officers at site,-

OD40082/2023-2024:Supply and installation of DELUXE SWING Descriptions• Product Area : 2.8m X 1.9m (9.2ft X 6.2ft)• Safe Area : 3.8m X 2.9m (12.5ft X 9.5ft) • Friends at a time : 3 Adults Technical Specification:• Leg pipe :40NB hot dip galvanized swing leg pipe of length 2950mm with GI thickness of 60μ.• Top pipe :50NB hot dip galvanized swing top pipe of length 1895mm with GI thickness of 60μ with an ISF conforming to IS 1730-1961 welded at its both ends to junction box. Pipe can withstand torsional stress created du to swinging motion.• Junction box :225mmx103mm junction box made from 3mm thick GI Plated plate to house the two swing leg pipes, top pipe & roof frame.• Swing clamp assembly :Swing clamps made up of two parts are joined together with M6 Allen bolts along with S-Hook & a specially designed swing pin. The S-Hook is specially designed to house a bearing for smooth & noiseless swinging. The clamps are made from injection molded Nylon-6 plastic.• Chain :Rubber dip molded swing chain of dia 6mm.• Hook :S-Hook of dia 8mm of Grad SS 304.

OD40083/2023-2024:Supply and installation of HOPPER SPRING RIDER Descriptions • Product Area : 1m x 0.5m (3.3ft X 1.6ft)• Safe Play Area : 2m x 1.5m (6.5ft X 5ft)• Ideal For : 3-6 Years• Friends at a time : 1 Technical Specification:• Hopper :Hopper is made up of rotational molding process. It has been provided with four bolts. Hopper is bolted to the spring assembly.• Spring assembly :It consists of top plate, spring, footrest & square base plate suitably fixed to each other with U-Bolts. The Spring is made from En47/45 Spring Steel & the two plates are made from MS with GI plating for corrosion resistance • Rotational Molded Products : The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability.• Foundation Stand :Foundation Stand made of 40NB Galvanized pipe with GI coated plates welded on both ends for fixing the square base on top and foundation angles at bottom.• Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness upto 60micron. • Pipe Materials or Class: Light Duty ('A' Class) & Medium Duty ('B' Class) Series of pipes only. Wall thickness of pipe varies according to class/• Powder coating: It shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50- 70 microns. It is tested for• Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color: Multicolor for optional or customized & according to RAL shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap

OD40084/2023-2024:Supply and installation of PONNY SPRING RIDER Descriptions• Product Area : 1m x 0.5m (3.3ft X 1.6ft)• Safe Play Area : 2m x 1.5m (6.5ft X 5ft)• Ideal For : 3-6 Years • Friends at a time : 1 Technical Specification: • Pony :Pony is made up of rotational molding process. It has been provided with four bolts. Pony is bolted to the spring assembly.• Spring assembly :It consists of top plate, spring,footrest & square base plate suitably fixed to each other with U-Bolts. The Spring is made from En47/45 Spring Steel & the two plates are made from MS with GI plating for corrosion resistance. • Rotational Molded Products : The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability.• Foundation Stand :Foundation Stand made of 40NB Galvanized pipe with GI coated plates welded on both ends for fixing the square base on top and foundation angles at bottom.• Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness upto 60micron.• Pipe Materials or Class: Light Duty ('A' Class) & Medium Duty ('B' Class) Series of pipes only. Wall thickness of pipe varies according to class / series of pipe used.• Powder coating: It shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments.• Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color: Multicolor for optional or customized & according to RAL shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap

OD40085/2023-2024:Supply and installation of BRINJAL BIN Descriptions• Product Area : 0.3m Dia. (1.3ft Dia.)• Height : 0.7m (2.6ft)• Capacity : 84 Ltrs Technical Specification:• Brinjal Bin : Brinjal bin is made up of Fiber reinforced plastic(FRP).This innovative brinjal dust-bin is designed for accomodating dry as well as wet kind of trash in the garden or public places.The brinjal dustbin has shape, size and parts that of a brinjal which looks like a real brinjal and the trash can be put through inside the mouth of the brinjal. • FRP products :All the Fibre Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type.We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required colour to the product.Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test).Certificate: ISO 9001:2015 Color: Color as per image shown. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap

OD40087/2023-2024:Supply and installation of SINGLE BAR Descriptions• Product Area : 1.6 m x 0.3 m (6ft x 0.7ft) • Safe Play Area : 2.8 m x 1.3 m (9.3 ft x 3.94ft)• Age Group : 13 yrs & Above• Friends at a time : 1 Technical Specification:• Vertical Frame:Vertical pipes of the Horizontal Bar is made up of 40NB GI pipes. This horizontal bar is used f the exercise of hands and upper part of the body of the children.• Spacer Pipe: Spacer is made up of 25NB GI pipes & 50X10 GI flat. • Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron. • Powder coating: shall be done of pure polyester exteriors ultra- stabilized powder Paints. Thickness maintaine is aminimum of 60-70microns.• Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Colour or similar specifications approved by departmental officers at site,-

OD40088/2023-2024:Supply and installation of LEG PRESS DOUBLE STANDARD Descriptions• Product Area : 2.05m X 0.5m (6.73Ft X 1.64Ft)• Safe Play Area : 3.05m X 1.5m (10Ft X 5Ft) Function:• Workout of thigh and calfs Strengthening Legs Technical Specification:• Post Dia: 80NB GI main vertical support pipe of Leg Press Double is fixed over 10mm thick base plate. 10mm thick clamping plates are attached to main frame tohold the rest of assemblies.• Seat frame: Seat Frame made from 40NB bend GI pipes and Material used for seat is HDPE (High- Density Polyethylene) UV stabilised/LLDPE.This seat frame is mounted on vertical support pipe through specially designed bearing housings. • Footrest: Footrest support to be of 25NB G.I Pipe. The materials used for footrest is Aluminum casting/LLDPE/HDPE/Nylon.• Bearing Housing shall be made from MS material.• Bearing: Bearings are oil sealed, self-lubricated made of SKF/ NTN/ NACHI / FAG make shall be provided for smooth & trouble-free movement.• Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 40-60micron. • Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion testwith the help of cross hatch cutter instruments.• Nut and Bolts: Galvanized/S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: ISO9001:2015 Color: Multicolor for optional or customized and as per RAL Shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. Note: Images are only for references. Actual Product or color of the product may vary.

OD40089/2023-2024:Supply and installation of HIP TWISTER DOUBLE Descriptions• Product Area : 1.2m x 0.9m (3.9ft x 3ft)• Safe Play Area : 2.2m x 1.9m (9.85ft x 5.3ft)• Ideal For : 13 Years & above Function:• Stretches waist & Upper Body. Technical Specification: • Main Support: The main support of Hip twister consist of 100NB G.I Pipe. • Handle: 25NB Galvanized pipe bend to form handle of Hip Twister product. • Footrest Bend Pipe: 40NB GI pipe is attached with main frame to form a foot rest having 130x50x5 thk plate• Standing or Rotating Disc : Standing Disc of 300mm Dia round size shall be made of HDPE/Metal. 15mm thick Sheet and Plate 10mm thick for base support.• Bearing: Bearings are oil sealed, self-lubricated made of SKF/ NTN/ NACHI make shall be provided for smooth & trouble-free movement.• Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron.• Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instruments.• Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Color or similar specifications approved by departmental officers at site,-

OD40090/2023-2024:Supply and installation of CHEST&SHOULDER COMBINATION Descriptions• Product Area : 1.8m x 1m (6ft x 3.5ft)• Safe play Area : 3.8m x 2m (10ft x 7ft)Function:• Strengthens Chest muscles, Forearms & Triceps. Technical Specification:• Main Frame: The main frame of Chest Press double is made from 100NB GI Pipe. • Seat frame: Seat Frame made from 32NB GI pipe. Material used for seat are LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect lend of uniform thickness & durability.• Handle: Handle frame is made from 32NB and 25NB GI Pipe. Material used for handgrip is EPDM (ethylene propylene diene monomer) Rubber.• Footrest: 32NB GI material pipe is used for footrest.• Bearing: Bearings are oil sealed, self-lubricated made of SKF/ NTN/ NACHI make shall be provided for smooth & trouble-free movement.• Others: Internal lock to limit the movement • Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 40-60micron.• Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test with the help of cross hatch cutter instruments.• Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Colour or similar specifications approved by departmental officers at site,-

OD40091/2023-2024:Supply and installation of AERIAL STROLLER Descriptions• Product Area : 1m x 0.5m (5ft x 2.6ft)• Safe Play Area : 2m x 1.5m (7.2ft x 4.9ft)• Ideal For : 13 Years & above Function:• Strengthens Leg Muscles.• Lower body workout Technical Specification:• Post Dia: The Aerial Stroller having Ergonomic design with 100NB GI main vertical support pipe of Aerial Stroller is fixed over 10mm thick base plate. Clamping plates are attached to main frame to hold the rest of assemblies. • Footrest and Handles: Footrest bend and Handle having 40NB and 25NB Dia galvanized pipe respectivelyThe materials used for footrest is aluminum/LLDPE/HDPE/Nylon. • Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron. • Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion testwith the help of cross hatch cutter instruments.• Bearing Housing shall be made from MS material.• Bearing: Bearings are oil sealed, self-lubricated made of SKF/ NTN/ NACHI / FAG / NRB make shall be provided for smooth & trouble-free movement.• Pins and Circlips: Pins shall be made from EN8/ MS material & Circlips made from standard material.• Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety agains entrapment. Colour or similar specifications approved by departmental officers at site,-

OD19759/2024-2025:Supplying and Providing Victoria bench (150cm x 60 cm), with FRP streap 3 seater heavy duty garden bench for outdoor powder coated for a smooth finish washable and waterproof ,wooden finish

OD19760/2024-2025: Supplying and Providing VIP bench (150cm x 60 cm), with FRP streap 3 seater with hand rest heavy duty garden bench for outdoor powder coated for a smooth finish washable and waterproof ,wooden finish

OD19828/2024-2025:Park fountain (Basin diameter 6 meters , Fountain height 4.8 meters water depth 0.60 meters, Central jet - 1.8 meter tall 2.5cm diameter nozzle, Ring of sprays - 12 smaller nozzles, 0.60 tall, spaced evenly around the basin, Cascading waterfall - 1.2meterswidw 0.6 meters tall, Led lighting - Color changing lights embedded in the fountain floor and surrounding landscaping.

Appendix-B-Art Work

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

4.2.3:Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

50.6.1.1:Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

13.9.2:Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.20 mm cement plaster

OD19339/2024-2025:Painting on the walls and premium Acrylic paint with pictures by grade 1 artist , pictures and artist approved by departmental officers over a pot of special primer and finishing with premium quality sleak warnish 2 coats as per the direction of departmental officers at site.

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.45.1:Finishing walls with textured exterior pint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm

4.3.2:Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.22.5:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelHard drawn steel wire fabric

OD19745/2024-2025:Fabricating and fixing of Selfie point with steel structure and covering with glazy Acrylic sheet into size and shape as per the directions of the departmental officers at site.(Platform size 3mX3m)

Appendix C - Civil and Horticultor

50.6.1.1:Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

13.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.45.1:Finishing walls with textured exterior pint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm

30.2.2:Supplying and stacking of good earth at site including royalty and carriage upto 5 k.m. lead complete (earth measured in stacks will be reduced by 20% for payment).

30.2.3:Supplying and stacking sludge at site including royalty and carriage upto 5 k.m. lead complete (sludge measured in stacks will be reduced by 8% for payment).

30.2.8:Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).

30.2.9:Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge

30.2.10.1:Grassing with selection No. 1 grass including watering and maintenance of the lawn for 60 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately).In rows 5 cm apart in both directions

16.91.2:Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

OD19804/2024-2025:Dismantling and lifting up of Roof.

18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

50.18.7.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall

50.18.9.3.2:Providing and fixing PVC pipes includes jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm dia 10KGF/cm2

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

OD20215/2024-2025:Providing 2 HP (Kirloskar /Crompton) )motor pump and accessories