IREL India Limited Tender

Reinforced Cement concrete M-20 (350Kg/M3) for the construction of new building Columns footings by using 20mm & down graded stone aggregate etc including all cost & conveyance of materials,water proofing admixtures (Dr:fixet or equivalent), loading & unloading charges, hire & labour charges for shuttering/form work, labour charges for mixing, laying, ramming, watering & curing,etc.at all heights and levels but excluding cost of cement & M.S bar etc complete as per standard specification (Concrete should be mixed with mixer machine compacted with vibrator)

Reinforced Cement concrete M-20 (350Kg/M3) for for the construction of new building plinth beam etc by using 20mm & down graded stone aggregate etc including all cost & conveyance of materials,water proofing admixtures (Dr:fixet or equivalent), loading & unloading charges, hire & labour charges for shuttering/form work, labour charges for mixing, laying, ramming, watering & curing,etc.at all heights and levels but excluding cost of cement & M.S bar etc complete as per standard specification (Concrete should be mixed with mixer machine compacted with vibrator)

Reinforced Cement concrete M-20 (350Kg/M3) for the construction of new building columns (Up to 5M level) etc by using 20mm & down graded stone aggregate etc including all cost & conveyance of materials, water proofing admixtures (Dr:fixet or equivalent) loading & unloading charges, hire & labour charges for shuttering/form work, labour charges for mixing, laying, ramming, watering & curing,etc.at all heights and levels but excluding cost of cement & M.S bar etc complete as per standard specification (Concrete should be mixed with mixer machine compacted with vibrator)

Supplying & Placing RMC M-35 (420Kg/M3) mix for New building beams (Up to 5M level) etc including all cost and conveyance of RMC with admixtures, hire charges for concrete motor pumps and boom placers, shuttering materials, all labour charges, watering,curing etc complete as per standard specification but excluding cost of MS reinforcement. (Concrete should be compacted with mechanical/electric vibrator) "RMC M-35 Concrete Specification: Grade: M35, Mix Ratio: Approximately (Cement :Fine Aggregates 740 kg/M3 :Coarse Aggregates 20mm 60% (740 kg/M3)12 mm 40%(462 kg/M3)), Characteristic Compressive Strength: 20 MPa (After 28 days), Cement Type: Portland Cement 53 grade (Type OPC or similar), Maximum Aggregate Size: Typically 20mm, Water-Cement Ratio: As per mix design Admixtures: As per mix design (if required), Workability: Slump value as per project requirement Costs and Services:" Concrete Motor Pump & Boom Placer Hire Charges: Concrete placement requires the use of concrete motor pumps and boom placers. The hire charges & operational charges & all other charges are included in the Contractor's quoted rates. Testing and Certification: To guarantee quality and adherence to specifications, RMC test certificates shall be submit. These certificates outline mix proportions, compressive strength, and other pertinent properties. The cost associated with testing and certification may be incorporated into the in the Contractor's quoted rates. It is important to note that IREL does not entertain any price escalation beyond the initially quoted rates at any circumstances such influenced by market dynamics, raw material prices, and other relevant factors. THE BIDDER SHOULD BE GO THROUGH THE SPECIAL CONDITIONS OF THE CONTRACT (SCOC) FOR THE AWARENESS BEFORE QUOTED THEIR RATES

Supplying & Placing RMC M-35 (420Kg/M3) mix for Building roof, lintel, Stair, Shade & drobslab (Up to 5.0M level ) etc including all cost and conveyance of RMC with admixtures, hire charges for concrete motor pumps and boom placers, shuttering materials, all labour charges, watering,curing etc complete as per standard specification but excluding cost of MS reinforcement. (Concrete should be compacted with mechanical/electric vibrator) "RMC M-35 Concrete Specification: Grade: M35, Mix Ratio: Approximately (Cement :Fine Aggregates 740 kg/M3 :Coarse Aggregates 20mm 60% (740 kg/M3)12 mm 40%(462 kg/M3)), Characteristic Compressive Strength: 20 MPa (After 28 days), Cement Type: Portland Cement 53 grade (Type OPC or similar), Maximum Aggregate Size: Typically 20mm, Water-Cement Ratio: As per mix design Admixtures: As per mix design (if required), Workability: Slump value as per project requirement Costs and Services:" Concrete Motor Pump & Boom Placer Hire Charges: Concrete placement requires the use of concrete motor pumps and boom placers. The hire charges & operational charges & all other charges are included in the Contractor's quoted rates. Testing and Certification: To guarantee quality and adherence to specifications, RMC test certificates shall be submit. These certificates outline mix proportions, compressive strength, and other pertinent properties. The cost associated with testing and certification may be incorporated into the in the Contractor's quoted rates. It is important to note that IREL does not entertain any price escalation beyond the initially quoted rates at any circumstances such influenced by market dynamics, raw material prices, and other relevant factors. THE BIDDER SHOULD BE GO THROUGH THE SPECIAL CONDITIONS OF THE CONTRACT (SCOC) FOR THE AWARENESS BEFORE QUOTED THEIR RATES

Reinforced Cement concrete M-20 (350Kg/M3) for the construction of new building columns (above 5M level) etc by using 20mm & down graded stone aggregate etc including all cost & conveyance of materials, water proofing admixtures (Dr:fixet or equivalent) loading & unloading charges, hire & labour charges for shuttering/form work, labour charges for mixing, laying, ramming, watering & curing,etc.at all heights and levels but excluding cost of cement & M.S bar etc complete as per standard specification (Concrete should be mixed with mixer machine compacted with vibrator)

Supplying & Placing RMC M-35 (420Kg/M3) mix for New building beams (above 5M level) etc including all cost and conveyance of RMC with admixtures, hire charges for concrete motor pumps and boom placers, shuttering materials, all labour charges, watering,curing etc complete as per standard specification but excluding cost of MS reinforcement. (Concrete should be compacted with mechanical/electric vibrator "RMC M-35 Concrete Specification: Grade: M35, Mix Ratio: Approximately (Cement :Fine Aggregates 740 kg/M3 :Coarse Aggregates 20mm 60% (740 kg/M3)12 mm 40%(462 kg/M3)), Characteristic Compressive Strength: 20 MPa (After 28 days), Cement Type: Portland Cement 53 grade (Type OPC or similar), Maximum Aggregate Size: Typically 20mm, Water-Cement Ratio: As per mix design Admixtures: As per mix design (if required), Workability: Slump value as per project requirement Costs and Services:" Concrete Motor Pump & Boom Placer Hire Charges: Concrete placement requires the use of concrete motor pumps and boom placers. The hire charges & operational charges & all other charges are included in the Contractor's quoted rates. Testing and Certification: To guarantee quality and adherence to specifications, RMC test certificates shall be submit. These certificates outline mix proportions, compressive strength, and other pertinent properties. The cost associated with testing and certification may be incorporated into the in the Contractor's quoted rates. It is important to note that IREL does not entertain any price escalation beyond the initially quoted rates at any circumstances such influenced by market dynamics, raw material prices, and other relevant factors. THE BIDDER SHOULD BE GO THROUGH THE SPECIAL CONDITIONS OF THE CONTRACT (SCOC) FOR THE AWARENESS BEFORE QUOTED THEIR RATES

Supplying & Placing RMC M-35 (420Kg/M3) mix for Building roof, lintel, Stair, Shade & drobslab (above 5M level) etc including all cost and conveyance of RMC with admixtures, hire charges for concrete motor pumps and boom placers, shuttering materials, all labour charges, watering,curing etc complete as per standard specification but excluding cost of MS reinforcement. (Concrete should be compacted with mechanical/electric vibrator) "RMC M-35 Concrete Specification: Grade: M35, Mix Ratio: Approximately (Cement :Fine Aggregates 740 kg/M3 :Coarse Aggregates 20mm 60% (740 kg/M3)12 mm 40%(462 kg/M3)), Characteristic Compressive Strength: 20 MPa (After 28 days), Cement Type: Portland Cement 53 grade (Type OPC or similar), Maximum Aggregate Size: Typically 20mm, Water-Cement Ratio: As per mix design Admixtures: As per mix design (if required), Workability: Slump value as per project requirement Costs and Services:" Concrete Motor Pump & Boom Placer Hire Charges: Concrete placement requires the use of concrete motor pumps and boom placers. The hire charges & operational charges & all other charges are included in the Contractor's quoted rates. Testing and Certification: To guarantee quality and adherence to specifications, RMC test certificates shall be submit. These certificates outline mix proportions, compressive strength, and other pertinent properties. The cost associated with testing and certification may be incorporated into the in the Contractor's quoted rates. It is important to note that IREL does not entertain any price escalation beyond the initially quoted rates at any circumstances such influenced by market dynamics, raw material prices, and other relevant factors. THE BIDDER SHOULD BE GO THROUGH THE SPECIAL CONDITIONS OF THE CONTRACT (SCOC) FOR THE AWARENESS BEFORE QUOTED THEIR RATES

MS reinforcement (FE 500) bend, tied and placed in position for all RCC works at all heights & levels including all cost and conveyance of MS bars & binding wire, loading unloading charges, all labour charges for straightening, cutting, bending, binding with approved annealed binding wires or welding whatever required etc, complete as per std. Specification

Supplying, filling and levelling good quality red earth in proposed basement at New building in correct levels including watering, consolidating, all cost and conveyance of materials, all labour charges, loading , unloading charges etc complete as per standard specification.

Cement block Masonry using good cement blocks for Superstructures (Up to 5.0 M) in cement mortar 1:6 The rate includes cost and conveyance of all materials, all labour charges, hire charges for tools and plants, loading-unloading charges, curing etc complete as per standard specification but excluding cost of cement.

Cement block Masonry using good cement blocks for Superstructures (above 5.0 M) in cement mortar 1:6 The rate includes cost and conveyance of all materials, all labour charges, hire charges for tools and plants, loading-unloading charges, curing etc complete as per standard specification but excluding cost of cement.

Plastering in cm 1:3, 12mm thick one coat at all heights (Up to 5m) and levels floated hard and trowelled smooth including all cost and conveyance of materials,water proofing admixtures (Dr:fixet or equivalent) and labour charges, providing necessary scaffolding, watering and curing etc complete as per standard specification but excluding cost of cement.

Plastering in cm 1:3, 12mm thick one coat at all heights (Above 5m)and levels floated hard and trowelled smooth including all cost and conveyance of materials,water proofing admixtures (Dr:fixet or equivalent) and labour charges, providing necessary scaffolding, watering and curing etc complete as per standard specification but excluding cost of cement

Plastering with cm 1:4, 15mm thick one coat at all heights (Up to 5m) and levels floated hard and trowelled smooth including all cost and conveyance of materials,water proofing admixtures (Dr:fixet or equivalent) and labour charges, providing necessary scaffolding, watering and curing etc complete as per standard specification but excluding cost of cement

Plastering with cm 1:4, 15mm thick one coat at all heights (above 5m) and levels floated hard and trowelled smooth including all cost and conveyance of materials,water proofing admixtures (Dr:fixet or equivalent) and labour charges, providing necessary scaffolding, watering and curing etc complete as per standard specification but excluding cost of cement

Supplying and fixing Vertified Floor/wall tile (Glossy/matt finish tiles) approved premium quality and size in CM 1:4, 15mm thick and pointing with suitable coloured cement / epoxy compound etc including all cost conveyance of materials hire charges for tools and plants and all labour charges etc complete as per standard specification but excluding cost of cement.

Providing and laying 80mm thick approved quality & Factory made Cement concrete interlocking paver block making machine with strong vibratory compaction of approved size, design and shape, laid in required colour and pattern over and including 50mm thick compacted bed of 6mm and down grade broken stone, edges filling with same coloured concrete, fillng the tile joints with fine sand etc complete as per standard specification( Rate shall include cost of material , transportation , loading &unloading charges, labour charges for laying and compaction before and after)

Supplying, laying and fixing 110mm dia PVC pasted type pipe(4 Kg/cm2) for down water pipe/sanitation lines at all heights and levels etc including cutting masonry or concrete floor, sun shade etc whereever found necessary for taking connections fixing the pipes to the walls with stainless steel clamps and st.screws including all cost and conveyance of materials all specials such as bends, elbows, sockets, loading unloading charges, all labour charges etc complete as per standard specificatio

Supplying, Laying and fixing 25 mm dia PVC pipe (Approved quality and make) for water pipe lines, including cutting/concealing masonry walls or concrete floor, etc wherever found necessary for taking connections fixing the pipes to the walls with stainless steel clamps and SS .screws including all cost and conveyance of materials all specials such as bends, elbows, sockets, loading unloading charges, all labour charges , scaffolding charges etc complete as per standard specification..

Supplying, Laying and fixing 32 mm dia PVC pipe (Approved quality and make) for water pipe lines, including cutting/concealing masonry walls or concrete floor, etc wherever found necessary for taking connections fixing the pipes to the walls with stainless steel clamps and SS .screws including all cost and conveyance of materials all specials such as bends, elbows, sockets, loading unloading charges, all labour charges , scaffolding charges etc complete as per standard specification

Supplying, Laying and fixing 40 mm dia PVC pipe (Approved quality and make) for water pipe lines, including cutting/concealing masonry walls or concrete floor, etc wherever found necessary for taking connections fixing the pipes to the walls with stainless steel clamps and SS .screws including all cost and conveyance of materials all specials such as bends, elbows, sockets, loading unloading charges, all labour charges , scaffolding charges etc complete as per standard specification

Supplying and fixing approved quality white colour hand wash basin with Half pedestal and CP heavy duty Pillar cock (Jaquar,Cera or equivalent make) of size 500x400 including all fitting. PVC Angular Cock, PVC connector etc including all cost and conveyance of materials, loading unloading charges, all labour charges etc complete as per standard specification.

Supplying and fixing approved quality Single piece European Water Closet (Jaquar,Cera or equivalent make) S -trap/P-trap with UF soft close slim seat cover, PVC Health Faucet, PVC Angular Stop Cock, PVC connector etc including all fittings and all cost and conveyance of materials, loading unloading charges, all labour charges etc complete as per standard specification

Supplying and fixing approved quality CP long body heavy duty water taps (Jaquar or equivalent make) including all cost and conveyance of materials, loading unloading charges, all labour charges etc complete as per standard specification.

Supplying and fixing good quality wall mirrors minimum size 60 x 60cm or nearest size/square/oval type including all cost conveyance of materials hire charges for tools and plants and all labour charges etc complete as per standard specification.

Supplying and fixing approved quality Towel rod 600mm Long Stainless Steel including all cost and conveyance of materials, loading unloading charges, all labour charges etc complete as per standard specification.

Painting the inside walls & ceiling surface of the new building with first quality Plastic emulsion paint of approved quality and colour (Asian/Berger/ICI make) two coats after completing one coat cement primer coating and two coat exterior wall putty work after cleaning the surface at all heights and levels including all cost and conveyance of materials,water proofing admixtures (Dr:fixet Latex or equivalent) all labour charges, hire charges for tools and plants, scaffolding charges, etc complete as per standard specification.

Painting the out side walls of building with first quality Acrylic exterior paint of approved quality and colour (Asian/Berger/ICI make) two coats after completing one coat cement primer coating and two coat exterior wall putty work after cleaning the surface at all heights and levels including all cost and conveyance of materials, water proofing admixtures (Dr:fixet Latex or equivalent)all labour charges, hire charges for tools and plants, scaffolding charges, etc complete as

Fabrication, supply and fixing aluminium structural glazed type openable Windows using good quality aluminium section(section size 2.00 mm thick or nearest size )for frame work and approved quality 6mm thick tinted glass. etc including all cost and conveyance of all materials (Aluminium section, glass, Brass screw/ SS screw, spacer tap, weather proof silicon friction stay etc) and labour charges / labour charges & hire charges for scaffolding, tools and plants,loading / unloading chargesetc complete as per standard specification.

Fabrication, supply and fixing aluminium openable door (single / double leaf) using good quality aluminium section(section size 85mm x 44mm ,top and bottom 100mm x 44mm 2.5mm thick or nearest size )for frame work and 8mm thick tempered tinted glass with frosted design approved quality etc including all cost and conveyance of all materials (8mm glass, branded slim type automatic hydraulic door closer ,Heavy type door lock ,stainless steel door handles 450 mm long etc ) and labour charges / labour charges & hire charges for scaffolding, tools and plants,loading / unloading chargesetc complete as per standard

Supplying & fixing FRP moulded with Designs Glass doors 0.70 MX2.100M size 6mm thick toughen design glass including all cost and conveyance all materials(Glass, suitable hinges, locking system slim type automatic hydraulic door closer etc ) labour charges & hire charges for scaffolding, tools and plants, loading / unloading charges etc complete as per standard specification

Supplying & fixing stainless steel handrails For Stair using 304 grade SS square/round section , Master lugs (readymade wood/ glass finished average lugs 14 nos ) ,minimum 50mm top rail etc including all cost and conveyance of materials (SS square/round section rails, Master lugs , Vertical, teak etc) labour charges & hire charges for scaffolding, tools and plants, loading / unloading charges etc complete as per standard specification

Supply white colour Sintex/equivalent PVC double layered water tank (500 Ltrs 2 nos) and erected the same with connection works to the water line/pumbing line with suitable high quality fittings at the top of the newly constructed building etc all charges for Conveyance, lifting, erection & plumbing work including suitable scaffolding, tools and plants, loading / unloading charges etc complete as per standard specification

Sundry & Petty repair maintenance works etc. Skilled Labour

Sundry & Petty repair maintenance works etc. Man mazdoor

Supply & stacking ISI mark best quality portland cement (opc/ppc) approved make in paper bag including all cost and conveyance of materials, loading & unloading charges, stacking at suitable place for consuming as and when require, etc complete as per standard specification ( Payment will be made only for actual quantity of cement consumed)