INKEL Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 1,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_INKEL_233940_1Bid Award Id
ViewTender No
NIT/INKEL/NHM/2018-19/020Tender Authority
INKEL Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Renewing glass panes, with wooden fillets wherever necessary-Float glass panes of thickness 4 mm
27
-
1229
... More
Removing white or colour wash by scrapping and sand paperingand preparing the surface smooth including necessary repairs toscratches etc. complete
100
-
13
... More
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work
3156
-
80
... More
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
3156
-
16
... More
Renewing wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete, including removal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge- Sal wood battens
0.25
-
110726
... More
Polishing on wood work with ready made wax polish of approved brand and manufacture :Old work
10.5
-
67.66
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work
214
-
73.93
... More
Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows.
216
-
90
... More
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.
1200
-
4
... More
Core cutting for following sizes of Pipes, in following RCC Structures, including grouting the holes with GP2 Conbextra or approved equal. In floor/roof slab, thickness 120mm. (approx.). 50mm. O.D.
5
-
500
... More
Core cutting for following sizes of Pipes, in following RCC Structures, including grouting the holes with GP2 Conbextra or approved equal. In floor/roof slab, thickness 120mm. (approx.). 63mm. O.D.
5
-
550
... More
Core cutting for following sizes of Pipes, in following RCC Structures, including grouting the holes with GP2 Conbextra or approved equal. In floor/roof slab, thickness 120mm. (approx.). 110mm. O.D.
5
-
700
... More
DISMANTLING WORKS
-
-
-
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge-In cement mortar
4.81
-
1215
... More
Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge -In cement mortar
2
-
1450
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in- charge - Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
12.01
-
1437
... More
Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead
551
-
125
... More
Demolishing R.C.C. work manually/ by mechanical means including cutting and stacking of steel bars and disposal of unserviceable material within 50metres lead as per direction of Engineer - in- charge.
21
-
2097
... More
Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineerin- charge.
35
-
722
... More
Dismantling tile work in floors and roofs laid in cement mortar including removal of cement mortar, stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
2697.6
-
46
... More
Taking out doors, windows and clerestory window shutters (steel orwood) including stacking within 50 metres lead : Of area 3 sq. metres and below
12
-
89
... More
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
250
-
36
... More
Taking out existing CC interlocking paver blocks from footpath/central verge,including removel of rubbish etc.,disposal of unserviceable material to the dumbing yard,for which payment shall be made separetly and stacking of serviceable material with in 50 metre lead as per direction of Engineer-in-charge.
367
-
77.75
... More
EARTH WORK
-
-
-
... More
Earth work excavation in all kinds of soil for foundation, trenches, grade beams, etc including strutting, shoring and packing cavities wherever required, bailing /pumping out water from any depth, if required and getting out the excvated soil and back filling the soil as required in layers not exceeding 20 cm in depth, consolidating each layer by watering, ramming etc and disposing of surplus excavated earth, stacking of serviceable stones, disposal of unserviceable materials away from site with initial lead upto 50m and lift upto 1.5m including breaking clods, watering, ramming and sectioning of soil bank etc complete as directed by the Engineer-in-charge.
259.89
-
240
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 1000 m and lift upto 1.5 m.
32
-
182
... More
Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
80
-
450
... More
CONCRETE AND ALLIED WORKS
-
-
-
... More
Providing and laying 1:4:8 (1 cement : 4 coarse sand :8 graded stone aggregate 40 mm nominal size) machine mixed and properly consolidated with hand rammers, including the cost and conveyance of all materials, labour, centering and shuttering, curing, lead lift etc complete at all levels upto plinth level and as directed by Engineer-in-charge.
59.64
-
7852
... More
Providing and laying 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 40 mm nominal size) machine mixed and properly consolidated with hand rammers, including the cost and conveyance of all materials, labour, centering and shuttering, curing, lead lift etc complete at all levels upto plinth level and as directed by Engineer-in-charge.
3
-
9167
... More
RCC WORKS
-
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).All works upto plinth level
43
-
9290.62
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).All works above plinth level upto floor V level
80.4
-
10448.77
... More
Add for using extra cement in the items of design mix over and above the specified cement content therein.
24.68
-
969.57
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :Foundations, footings, bases of columns, etc. for mass concrete
70
-
279.52
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
120
-
545.64
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights:Suspended floors, roofs, landings, balconies and access platform
440
-
608.62
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights:Lintels, beams, plinth beams, girders, bressumers and cantilevers
460
-
494.19
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights:Columns, Pillars, Piers, Abutments, Posts and Struts
100
-
674.27
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights:Stairs, (excluding landings) except spiral-staircases
54.72
-
604.37
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights:Weather shade, Chajjas, corbels etc., including edges
82.95
-
751.95
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto all levels.Thermo-Mechanically Treated bars of grade Fe-500D or more.
11836.25
-
82
... More
MASONRY WORKS
-
-
-
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand)
34.1
-
5716
... More
Masonry with solid concrete blocks in foundation and plinth in blocks of size 30x20x15cm, grade D of block density not less than 1800 kg/cum and average compressive strength of 4 N/mm2 and minimum strength of individual blocks 3.2 N/mm2 (as specified in IS 2185 part I 1979 Grade D) blocks constructed with cement mortar 1:6 for 20cm thick walls including cost and conveyance of all materials to site, labour charges, hire and labour for scaffolding, curing etc complete.
7.5
-
7000
... More
Masonry with solid concrete blocks above plinth, blocks of size 30x20x15cm, grade D of block density not less than 1800 kg/cum and average compressive strength of 4 N/mm2 and minimum strength of individual blocks 3.2 N/mm2 (as specified in IS 2185 part I 1979 Grade D) blocks constructed with cement mortar 1:6 for 20cm thick walls including cost and conveyance of all materials to site, labour charges, hire and labour for scaffolding, curing etc complete. Upto floor V level.
139.27
-
7500
... More
Masonry with solid concrete blocks, blocks of size 30x10x20cm, grade D of block density not less than 1800 kg/cum and average compressive strength of 4 N/mm2 and minimum strength of individual blocks 3.2 N/mm2 (as specified in IS 2185 part I 1979 Grade D) blocks constructed with cement mortar 1:5 for 10cm thick walls including providing reinforcement with 2 numbers of 6 mm dia torsteel bars every third layer (Cost of reinforcement will be paid wide item number 4.13), cost and conveyance of all materials to site, labour charges, hire and labour for scaffolding, curing etc complete. Upto floor V level
5
-
7750
... More
JOINERY WORKS
-
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately);For fixed portion - Powder coated aluminium (minimum thickness of powder coating 50 micron)
2851.8
-
555
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately);For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) - Powder coated aluminium (minimum thickness of powder coating 50 micron)
578.53
-
642
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item);With float glass panes of 4 mm thickness
33
-
1069
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item);With float glass panes of 5.5 mm thickness
59
-
1447
... More
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides.
355
-
1249
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. - With stainless steel cover plate minimum 1.25 mm thickness.
19
-
2961
... More
Providing and fixing 100mm brass locks (best make of approved quality) with CP brass screws for aluminium doors including necessary cutting and making good etc. complete.
19
-
518
... More
Providing and fixing stainless steel (SS 304 grade) adjustable friction window/ ventilator stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-in-charge complete - 255 X 19 mm.
43
-
389
... More
Providing and fixing aluminium casement windows/ ventilator fastener of required length for aluminium windows / ventilator with necessary SS screws etc. complete - Powder coated minimum thickness 50 micron aluminium.
16
-
80
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete; 300x10 mm
19
-
144
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete;150x10 mm
19
-
93
... More
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) handle with locking arrangement for openable windows including necessary screws and fittings of approved make as directed by Engineer-in-charge.
19
-
150
... More
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
26
-
599
... More
Providing and fixing to existing door frames-30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. Including providing 1 number latch, 1 number 150mm length SS tower bolt and 3 numbers of SS hinges with necessary screws for each door of approved makes.
9
-
3153
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
19
-
560
... More
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for Payment).
23
-
590
... More
Toughened glass - for cash counter- Supply and installation of 8 mm toughened glass with bevelled edges suiting the cash counter approved make.The rate shall be inclusive of all materials,necessary openings,clamps,accessories,fittings, labour, transportation etc. complete.
31
-
2000
... More
FINISHING WORKS
-
-
-
... More
External plastering with cement mortar 1:5, 15mm thick one coat over the surfaces of cement blockwork /brick work including making plaster grooves where ever necessary in all heights including cost and conveyance of all materials, labour charges, curing scaffolding etc complete in all floors.
428.43
-
281
... More
12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) in all heights including cost and conveyance of all materials, labour charges, curing scaffolding etc complete in all floors.
1316
-
232
... More
Extra for providing and mixing water proofing material(Sika or equivalent) in cement plaster work in proportion recommended by the manufacturers
400
-
15
... More
Plastering with cement mortar 1:3, with 6mm thick one coat over concrete the surfaces in all heights including cost and conveyance of all materials, labour charges, curing scaffolding etc complete in all floors.
502.73
-
208
... More
Plastering Rubble retaining wall with cement mortar 1:3 (1 cement: 3 coarse sand), 20mmcement plaster finished with a floating coat of neat cement of mix in all heights with water proofing compound including cost and conveyance of all materials, labour charges, curing scaffolding etc complete in all floors.
26
-
472
... More
Plastering with cement mortar 1:3 (1 cement: 3 fine sand), 12mmcement plaster finished with a floating coat of neat cement of mix in all heights including cost and conveyance of all materials, labour charges, curing scaffolding etc complete in all floors.
60
-
327
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections
380
-
49.22
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
742
-
126
... More
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer
4980
-
53.25
... More
External Painting - Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm), including cost and conveyance of all materials to site, labour charges, hire charges for scaffolding etc complete for all levels.
567.3
-
139
... More
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work
1818.73
-
122
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
261
-
113
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting old wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm of approved brand and manufacture including cost and conveyance of all materials to site, labour charges, hire charges for scaffolding,cleaning surface etc complete for all levels.
1250
-
127.69
... More
STEEL WORKS
-
-
-
... More
Grill work in windows/ ventilators including painting - Providing and fixing M.S. grills of required pattern in frames of doors, windows, ventilators etc. with M.S. flats, square or round bars etc. including finishing with 2 coats of synthetic enamel paint and a priming coat with approved steel primer, fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 ( 1 Cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) or fixed to openings /wooden frames with rawl plugs screws and all necessary fixtures etc all complete.
750
-
177
... More
Providing and fixing of Stainless steel staircase hand rail of 1200 mm over all height, made of Stainless steel of grade 304, gauge 16. The baluster is made of 32mm dia pipe fixed to every third tread ,One 100mm dia starter post with top cap at the first and 40mm dia vertical pipes at all tourining points using base plate of thickness 8 mm and 4 nos of bolt with SS cap. Top hand rail is made of 50 dia SS pipe , 2 nos of 25 mm horizontals and 20 mm verticals placed at 150mm centre to centre throug out stair. Individual pipe shall not be measured. The rate shall be inclusive of fixing the rail into concrete surface, with necessary hardware SS cap, grouting for the same ,buffing and polishing etc complete as per the drawing enclosed.
32
-
5000
... More
Structural steel work riveted, bolted or welded in tubular built up sections, trusses and framed work, MS inserts, joists etc including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, painting with 2 0r more coats of synthetic enamel paint etc all complete.
10061
-
124
... More
Reusing the dismantled structural steel riveted, bolted or welded in tubular built up sections, trusses and framed work, including scrapping and cleaning, cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, painting with 2 0r more coats of synthetic enamel paint and excluding cost of structural steel etc all complete.
1059
-
56.56
... More
FLOORING WORKS
-
-
-
... More
Supply and installation of HO –PRIMO PRIMUM – 2mm thick flooring sheet with self leveling compound for flooring works. The rate shall be inclusive of cost and conveyance of all materials, labour etc complete as directed by the Engineer in charge.
58
-
2300
... More
Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps but including the cost for providng and fixing 4mm thick glass strips for panels etc complete.
75
-
530
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm.
(The basic price considered for vitrified tile is Rs 650 per Sqm. Rate will be arrived based on the actual price of tile selected by the Engineer in charge at the time of execution.)
1809.6
-
1135
... More
Ceramic wall tile finish - Providing and fixing ceramic glazed wall tiles conforming to IS: 15622 of approved make, in all colours, shades except burgundy, bottle green, black of any size and thickness 8mm as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Premium quality tile only shall be used).
(The basic price considered for ceramic tile is Rs 540 per Sqm. Rate will be arrived based on the actual price of tile selected by the Engineer in charge at the time of execution.)
1208
-
1080
... More
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
95
-
3500
... More
Providing and fixing granite slab of thickness 18 mm or nearest size, gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish, cutting openings wherever required etc. complete at all levels.
60
-
4640
... More
Providing edge moulding to staircase steps and lift wall cladding 18mm thick granite stone works including machine polishing to edge to give high gloss finish etc. complete as per design approved by engineer in charge at all levels.
156
-
360
... More
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of 6mm down guage stone aggregate and spreading polythene sheet for the entire area, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
10
-
890
... More
Providing and laying a slurry coat of neat cement using 2.75 kg/sqm of cement over the RCC slab including cleaning the surface before treatment. Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) to required level.Finally finish the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) to the required level.
100
-
787.41
... More
Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineerin-charge. (Old CC paver blocks shall be supplied by the departmentfree of cost).
116
-
301.5
... More
ROOFING WORKS
-
-
-
... More
Supply and Installation of color coated 0.5 TCT galvalume profile sheet including vertical/curved surface of overall width 1072mm(nominal 1015 mm effective cover width)and nominal 28mm deep ribs with subtle square fluting in the five pans at nominal 203 mm cente-to-centre.The end rib shall be designed for anticapillary action,to avoid any seepage of water through the lateral overlap, filled with white lead continuous spacer tape 6.4mm thick x 6 mm wide at all joints and junctions along its length.The feed material shall be of .45 mm BMT(.50 mm TCT excluding paint thickness)COLORBOND steel-Hi tensile with min 550 MPa yield strength,metallic hot dipped coated with Aluminium Zinc alloy (55% Aluminium 43.5% Zinc,1.5% Silicon) as per AS 1397/ IS 15961-Zincalume AZ150(Min 150gms/sq.mt total on both sides with Super durable Polyester COLORBOND steel quality paint system of approved color,suitable for exterior application confirming to AS/NZS 2728 type-4.The sheet shall have a total coating thickness of 35 microns,super durable polyester COLORBOND quality paint system of 20 micron reverse polyester coat on back surface over 5 micron primer coat on both surfaces.The rate includes with necessary fittings ,cutting to size and shape where ever required.
1110
-
850
... More
Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete
5
-
350
... More
Providing and fixing PVC eaves of facia with 150mm width in required pattern and quality including fixing with nuts and bolts etc.complete.
115
-
200
... More
Providing and fixing multiwood Mukapu with 10mm thick, CNC cuttings,finishing with 2 or more coat of PU paint of approved make and pattern including hoisting ,fixing complete as per the direction of engineer in charge
20
-
2152
... More
Providing and fixing ridges and hips in roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complete. : Using colour coated Aluminium sheets of guage 18.
60
-
850
... More
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rainwater pipes complete.0.80 mm thick with zinc coating not less than 275 gm/m²
25
-
813.85
... More
Providing and fixing 160 dia PVC rain water gutter (pressure class 4Kg/sq.cm )with necessary iron brackets bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.
30
-
751.91
... More
FALSE CEILING WORKS
-
-
-
... More
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.
590
-
1449
... More
MISCELLANEOUS WORKS
-
-
-
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
4
-
12444
... More
Extra for depth for manholes : Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
8242
... More
Providing and fixing 35mm SS curtain rods of wall thickness 1.25 mm with two brass brackets, hanging aarrangements from ceiling if necessary fixed with brass screws and wooden plugs etc. wherever necessary complete.
40
-
180
... More
Providing and fixing 45mm stainless steel 304 grade Hand rail in Disabled Toilet including all necessary fixtures, welding etc complete as instructed by Engineer-in-charge.
20
-
550
... More
Supplying and fixing PVC septic tank 1000L capacity of approved brand in the desired location with all necessary inlet and outlet connections and fitting etc.,complete
1
-
12000
... More
Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
1
-
3050.16
... More
SANITARY INSTALLATIONS
-
-
-
... More
Providing and fixing wash basin with C.I. brackets/Bolts of approved quality and make, includingall fittings like waste coupling, waste pipe/ 10mm dia CP bolt, painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm
30
-
4301
... More
Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm
10
-
4629
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid
12
-
4928
... More
Providing and fixing PVC floor trap of self cleansing design with PVC screwed down or hinged grating with or without vent arm complete inlcuding cost of cutting and making good the walls and floors.a)100 mm inlet and 50/ 63 mm outlet
8
-
450
... More
Providing and fixing mirror of superior glass (of approved quality) and of rectangular shape 453x357mm with plastic moulded frame of approved make and shade with 6 mm thick white PVC sheet backing :
6
-
1085
... More
Providing and fixing unplasticised rigid PVC Drinage pipes conforming to IS 13592 Type A (pressure class 4 Kg/sq.cm ) including jointing the pipe with solvent cement etc complete. 50 mm dia pipe
80
-
120
... More
Providing and fixing unplasticised rigid PVC Drinage pipes conforming to IS 13592 Type A (pressure class 4 Kg/sq.cm ) including jointing the pipe with solvent cement etc complete. 63 mm dia pipe
75
-
150
... More
Providing and fixing unplasticised rigid PVC Drinage pipes conforming to IS 13592 Type A (pressure class 4 Kg/sq.cm ) including jointing the pipe with solvent cement etc complete.110 mm dia pipe
150
-
250
... More
Providing and fixing PVC " Y "junction for pipes with superior quality Adhesive etc complete. 50 mm dia pipe
10
-
150
... More
Providing and fixing PVC " Y "junction for pipes with superior quality Adhesive etc complete. 63 mm dia pipe
8
-
200
... More
Providing and fixing PVC " Y "junction for pipes with superior quality Adhesive etc complete.110 mm dia pipe
6
-
450
... More
Providing and fixing PVC Plain bend for pipes with superior quality Adhesive etc complete .50 mm dia pipe
15
-
80
... More
Providing and fixing PVC Plain bend for pipes with superior quality Adhesive etc complete. 63 mm dia pipe
10
-
120
... More
Providing and fixing PVC Plain bend for pipes with superior quality Adhesive etc complete. 110 mm dia pipe
10
-
225
... More
Providing and fixing PVC DOOR bend for pipes with superior quality Adhesive etc complete. 50 mm dia pipe
5
-
100
... More
Providing and fixing PVC DOOR bend for pipes with superior quality Adhesive etc complete. 63 mm dia pipe
5
-
200
... More
Providing and fixing PVC DOOR bend for pipes with superior quality Adhesive etc complete.110 mm dia pipe
5
-
350
... More
Providing and fixing P V C. clamp of required dia wherever required, including necessary screws, bolts & nuts of required size complete : 100 mm clamp .50 mm dia pipe
15
-
25
... More
Providing and fixing P V C. clamp of required dia wherever required, including necessary screws, bolts & nuts of required size complete : 100 mm clamp .63 mm dia pipe
10
-
35
... More
Providing and fixing P V C. clamp of required dia wherever required, including necessary screws, bolts & nuts of required size complete : 100 mm clamp.110 mm dia pipe
25
-
60
... More
Providing and fixing C.P. Cup of dia upto 65mm for brass fittings like long body bib cock,agle valve of approved quality conforming to IS standards. 15 mm nominal bore
60
-
45
... More
Providing and fixing PVC HALF TURN VALVE of approved quality complete including clamps ,cutting and making good the walls etc complete (internal work).25 mm outer dia
3
-
80
... More
Providing and fixing PVC HALF TURN VALVE of approved quality complete including clamps ,cutting and making good the walls etc complete (internal work).32mm outer dia
3
-
150
... More
Providing and fixing PVC HALF TURN VALVE of approved quality complete including clamps ,cutting and making good the walls etc complete (internal work).40mm outer dia
2
-
200
... More
Providing and fixing PVC pipes of pressure class of 10 Kg/Sq.cm complete fittings and PVC clamps including cutting and making good the walls etc complete (internal work).25mm outer dia
150
-
45
... More
Providing and fixing PVC pipes of pressure class of 10 Kg/Sq.cm complete fittings and PVC clamps including cutting and making good the walls etc complete (internal work).32mm outer dia
100
-
55
... More
Providing and fixing PVC pipes of pressure class of 10 Kg/Sq.cm complete fittings and PVC clamps including cutting and making good the walls etc complete (internal work).40mm outer dia
50
-
65
... More
Providing and fixing unplasticised rigid PVC Rain water pipes conforming to IS 13592 Type A (pressure class 4 Kg/sq.cm) including jointing the pipe with solvent cement etc complete.b) 110 mm diameter
144
-
250
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyserpoints of approved quality conforming to IS:8931 15mm nominal bore
52
-
686
... More
Providing and fixing unplasticised P.V.C. connection pipe with Nuts, collar and bush of approved quality and colour: 15 mm nominal bore with 45 cm length
52
-
97
... More
Providing and fixing 15 mm C.P. brass tap with elbow operation lever of approved quality and colour including all necessary fittings etc complete
42
-
649
... More
WIRING
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.Group C
193
-
1090.99
... More
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C
77
-
598.1
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.
2
-
1165.93
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.3 x 1.5 sq. mm
800
-
72.06
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.3 x 2.5 sq. mm
2500
-
108.09
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.3 x 4 sq. mm
40
-
159.97
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm
1200
-
82.15
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
750
-
99.44
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm
150
-
128.27
... More
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.75 mm X 75 mm X 60 mm deep
4
-
136.91
... More
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.100 mm X 100 mm X 60 mm deep
2
-
164.3
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch
27
-
121.06
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch
21
-
164.3
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet
27
-
116.74
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet
21
-
220.5
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet
24
-
138.36
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
92
-
415.07
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
16
-
34.59
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mm X 75mm)
25
-
252.21
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mm X 75mm)
18
-
266.62
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlet and 2 Nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).
75
-
726.36
... More
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB,“C” curve including connections, painting etc. as required.
8
-
768.16
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.
64
-
451.1
... More
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.
18
-
66.3
... More
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.
2
-
87.91
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
80
-
151.33
... More
Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required.
88
-
40.35
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.Upto 450 mm sweep
8
-
322.83
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.1 run of cable
1700
-
49
... More
Supplying and drawing of 10G Cat 6A Unshilded twisted pair (STP), 23 AWG Multi-cores (Solid), Bare Copper, Aluminum / Polyester Foil Tinned copper Braiding, PVC/LSZH cable in the existing surface/ recessed Steel/ PVC conduit as required.1 run of cable
1600
-
60
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.2 Pair
1200
-
27.38
... More
Providing & Fixing 20Pair Krone module with base frame in the recess / surface made out of 16 SWG sheet steel box, front openable, having locking arrangements duly powder coated, Painted in Siemens Grey colour.including dressing, ferruling and punching of telephone cable with krone tool etc. as required.
1
-
11616
... More
Supply and fixing of CAT 6 RJ 45 Socket with Shutter and termination of CAT 6 UTP Cable as required.
51
-
508
... More
DISTRIBUTION BOARDS
-
-
-
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.).4 way (4 + 12), Double door
1
-
6488.28
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).6 way (4 + 18), Double door
2
-
3832.15
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).8 way (4 + 24), Double door
2
-
4570.05
... More
Supplying and fixing Cable End Box (Loose wire box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.
1
-
624.04
... More
Supplying and fixing Cable End Box (Loose wire box)(IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.For 6 way, Double door TPN MCBDB
2
-
879.13
... More
Supplying and fixing Cable End Box (Loose wire box)(IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.For 8 way, Double door TPN MCBDB
2
-
1049.19
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
60
-
249.33
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps
12
-
2377.98
... More
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 A
4
-
961.28
... More
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.100 A
3
-
1237.99
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple Pole
2
-
1008.84
... More
Supplying and fixing 40A to 63A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple Pole
2
-
1600
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
16
-
10.09
... More
CABLE TRUNKING
-
-
-
... More
Providing and fixing the following 16SWG Hot Dip Galvanised Floor Trunking with 16SWG Trunking Cover along with necessary supports at equal intervals with neccessary Junction Boxes as required in Office area as directed by engineer in charge. Including providing of supports, nuts, bolts, washers and fasteners as required. The installation shall be complete in all respects (All accessories like tees, bends vertical / horizontal shall be factory fabricated and cost of these to be included in the rate.100 mm width X 40 mm depth X 1.6 mm thickness
60
-
611
... More
LIGHT FIXTURES
-
-
-
... More
Supply installation testing and commissioning of following light fixtures complete with all necessary accessories including suspenders, connectors etc as required (Sample shall be aprroved by the engineer in charge). The installation shall be complete in all respects.36w 2x2 Recess mounting fixture with CRCA body, LED Back Lit Principle for Long Lasting Life, Thin Bordered, 3500 lumens light output, 2.5KV Surge Protection, LG7 rated, Power Factor 0.95, THD 10% and 140-270 voltage range. Crompton Cat.ref LCTLRN-36-FO-CDL or equivalent in Philips/wipro only.
26
-
3482
... More
Supply installation testing and commissioning of following light fixtures complete with all necessary accessories including suspenders, connectors etc as required (Sample shall be aprroved by the engineer in charge). The installation shall be complete in all respects.20w 4 Feet LED Batten Tubelight with CRCA body, acrylic diffuser, 2000 lumens light output 2kVsurge protection, power factor 0.90 and operating range 140-270v 50Hz. Crompton Cat.ref LCTLP-20-CDL or equivalent in Philips/wipro only.
7
-
684
... More
Supply installation testing and commissioning of following light fixtures complete with all necessary accessories including suspenders, connectors etc as required (Sample shall be aprroved by the engineer in charge). The installation shall be complete in all respects.7w 1 Feet LED Mirror light with THD20% and operating range 140-270v 50Hz. Crompton cat part no. LCL-07-CDL or equivalent in Philips/ wipro only.
2
-
1189
... More
Supply of LED Recessed Downlighter with a nominal system lumen output of 1300 lumens and a minimum system efficacy of 85 lm/W. Luminaire wattage should not exceed 15W. The luminaire should have a color temperature of 6500K - Make: Wipro/Crompton
143
-
1950
... More
Supply of 1200mm(48 inches) Sweep Ceiling Fan of 320RPM, operating voltage of 220-240V, Double ball bearing type with necessary fixing bracket and Clamps as required.
80
-
2532
... More
Supply of 300 mm sweep Exhaust fan with Metal blades of approved colour, quality and complete the work in good condition as directed by the engineer in charge.
8
-
1800
... More
CABLING
-
-
-
... More
Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1).4C x 16 SQ MM
60
-
153
... More
Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1).4C x 10 SQ MM
220
-
137
... More
Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1).4C x 35 SQ MM
80
-
226
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. mm
47
-
296.89
... More
Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
320
-
36.03
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)
6
-
292.56
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)
2
-
367.51
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 35 sq. mm (32mm)
2
-
407.86
... More
EARTHING
-
-
-
... More
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required.
2
-
5292.09
... More
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
300
-
105.21
... More
MISCELLANEOUS
-
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.100 mm width X 50 mm depth X 1.6 mm thickness
190
-
628.36
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “bends” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.100 mm width X 50 mm depth X 1.6 mm thickness
10
-
1177.46
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Tee” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.100 mm width X 50 mm depth X 1.6 mm thickness
6
-
1356.17
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements