INKEL Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 1,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Alappuzha Ksrtc - Temporary Works For Garage And Parking, Package -2
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_INKEL_277015_1Bid Award Id
ViewTender No
NIT/INKEL/KIIFB/2019-20/026 dated 10/05/2019Tender Authority
INKEL Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
6216
-
127.82
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.M.S. tube
1888
-
136.89
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes
9798
-
139.64
Supply and Installation of color coated 0.5 TCT galvalume profile sheet including vertical/curved surface of overall width 1072mm(nominal 1015 mm effective cover width)and nominal 28mm deep ribs with subtle square fluting in the five pans at nominal 203 mm cente-to-centre.The end rib shall be designed for anticapillary action,to avoid any seepage of water through the lateral overlap, filled with white lead continuous spacer tape 6.4mm thick x 6 mm wide at all joints and junctions along its length.The feed material shall be of .45 mm BMT(.50 mm TCT excluding paint thickness)COLORBOND steel-Hi tensile with min 550 MPa yield strength,metallic hot dipped coated with Aluminium Zinc alloy (55% Aluminium 43.5% Zinc,1.5% Silicon) as per AS 1397/ IS 15961-Zincalume AZ150(Min 150gms/sq.mt total on both sides with Super durable Polyester COLORBOND steel quality paint system of approved color,suitable for exterior application confirming to AS/NZS 2728 type-4.The sheet shall have a total coating thickness of 35 microns,super durable polyester COLORBOND quality paint system of 20 micron reverse polyester coat on back surface over 5 micron primer coat on both surfaces.The rate includes with necessary overlaps, fittings ,cutting to size and shape where ever required.
2703
-
785
Providing and fixing 160 dia PVC rain water gutter (pressure class 4Kg/sq.cm )with necessary iron brackets bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.
250
-
1170
Providing and fixing .5mm thick 150 Gsm TCT Colour coated ridge of TATA Brand for roof covering including fixtures fixtures of sheet as per manufacturers standard specification.
125
-
1080
Earthwork
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
386
-
247.45
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. All kinds of soil
350
-
187.3
Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil
153
-
76.96
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
417
-
187
Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
298
-
462.87
PCC , RCC Works and Shuttering
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
207
-
6659.46
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
11
-
7159.72
Providing and laying C.C pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator, vacuum dewatering process and finally finished by floating brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge ( The panel shuttering work shall be paid for separately)
136
-
10279.06
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level
301
-
9586.59
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level
2
-
10781.55
Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
321
-
288.42
Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
495
-
563.02
Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
510
-
509.93
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
26590
-
84.17
Flooring and Waterproofing Works
-
-
-
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of Ist quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.
170
-
1112.2
Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
248
-
1107.59
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
70
-
443.6
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement,water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer in-charge. The product performance shall carry guarantee for 10 years against any leakage.For vertical surface two coats @0.70 kg per sqm
438
-
696.11
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer in- charge. The product performance shall carry guarantee for 10 years against any leakage.For horizontal surface one coat @1.10 kg per sqm.
161
-
538.85
Providing and fixing 18 mm thick fibre cement Heavy duty floor boards of approved quality and make ( High pressure steam cured) conforming to IS 14862:2000 in Mezzanine floor application,fixed over the existing supporting grid of M.S. Framework at 600mm c/c for normal traffic with the help of SS Counter sunk bolt 4mm dia 40mm length screws @300 mm centers by drilling an oversize hole to allow for expansion . The floor boards should be installed pependicular to the supporting beam.The board should be fixed flush without any gaps at the joint.A gap of minimum 5mm must be left on the periphery for the allowance of expansion. The work has to be executed as per specifications and or as directed by Engineer -in- Charge.
403
-
1004
Supply and installation of linolium sheet 1mm thick over Fibre cement Board at Mezannine floor as per manufacture's specfication & direction of Engineer-in-charge..
403
-
355
Partition Works
-
-
-
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
18
-
5539.1
Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
51
-
6095.56
Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete
13
-
6795.61
Providing and fixing of 50mm thick Aerocon sandwich panels for external/internal wall partitions having dry density 780 kgs per cum mean weight not less than 36 kgs per SqM made out of two 4 mm thick fibre reinforced cement sheets on either side of the light weight concrete core composed of Portland cement binders, silicaceous and micaceous material aggregate with tongue and groove arrangement. The bottom of the panel shall be fixed to the floor using channel made up of .9 mm thick GI channels of size 14x50x25 mm fixed to the existing floor with 6x60 mm nylon self expansion screws at 600 mm C/C, and top of the panel fixed to the ceiling with ceiling channel made up of .9 mm thick GI channels of size 38x50x38 mm. All the tongue and groove joints of the panels have to be properly cleaned and the recessed area of the panels have to be flushed using suitable material and fibre tape. The rate includes cost of 50mm Aerocon panels, GI Floor and ceiling channel, expansion screws, etc.
853
-
1485
Finishing Works
-
-
-
15 mm cement plaster on the rough side of single or half brick wall of mix:1:6 ( 1 cement : 6 fine sand)
493
-
275.41
12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).
185
-
238.46
Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 ( cement : 3 fine sand).
760
-
213.84
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
2470
-
54.95
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .
77
-
167
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On concrete work
1358
-
185.14
Joinery Works
-
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portion - Powder coated aluminium (minimum thickness of powder coating 50 micron)
1991
-
571.79
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) - Powder coated aluminium (minimum thickness of powder coating 50 micron)
910
-
661.69
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides
13
-
1288.72
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness
13
-
1492.97
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness
58
-
1102.68
Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. ( Area of opening for glass panes excluding portion inside rebate shall be measured).
38
-
110.57
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
142
-
617.89
Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames.
41
-
3252.81
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover
34
-
3444.27
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete:250x16mm
25
-
211.24
Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete
15
-
533.87
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm
20
-
75.99
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:100 mm
20
-
67.07
Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary necessary screws etc. complete. Powder coated minimum thickness 50 micron aluminium
40
-
82.53
Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-Charge. Powder coated minimum thickness 50 micron aluminium
30
-
101.57
Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:300x10 mm
20
-
148.26
Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:150x10 mm
20
-
95.62
False Ceiling Works
-
-
-
Providing & fixing of P.V.C. false ceiling as per the existing pattern & design with necessary fitting with Aluminum tube framing of size 2’-6’’ to 3’-0’’ of Aluminum tube 38mm x 18mm of 1mm thickness with necessary hanging with 7mm P.V.C. panel complete and making the joints and overlaps complete as per the drawing.
481
-
743
Miscellaneous Civil Works
-
-
-
Supplying and fixing C.I with out frame for manholes:455 x 610 mm rectangular C.I cover ( light duty ) the weight of the cover to be no less than 23 kg
9
-
1824.89
Electrical Works - Wiring
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group C
113
-
1125.73
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
11
-
1203.06
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C
69
-
617.15
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire
772
-
166.56
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
1856
-
203.73
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire
50
-
249.83
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm
25
-
84.76
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm
25
-
102.61
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 32 mm
25
-
132.35
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
24
-
428.28
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
20
-
35.69
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or inrecess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 ampsmodular switch, connection etc. as required. (For light plugs to be used in non residential buildings).
63
-
465.46
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
38
-
603.76
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden blockincluding connection etc as required.
30
-
68.41
Installation, testing and commissioning of pre - wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
160
-
148.71
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standardlength (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc.as required.
24
-
156.15
Installation of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required.Upto 450 mm sweep
1
-
333.11
Electrical Works -Distribution Boards
-
-
-
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB IRCCB / Isolator 16 way, Double door
1
-
2028.4
Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - three phase double cover (IP 42/43)
4
-
2783.61
Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+18) - three phase double cover (IP 42/43)
2
-
4439.43
Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required8 way (8+24) - three phase double cover (IP 42/43)
1
-
4752.78
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
120
-
257.27
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole
5
-
1040.97
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
2
-
10.41
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
1
-
221.58
Supply and fixing of following FP 415V, MCCB isolators in sheet steel powder coated enclosure with door interlock and padlock facility on surface confirming to IEC 60947-3 complete with all accessories, connections, testing and commissioning etc as required and as instructed by engineer in charge also making good any damages made during installation. - 25A FP MCCB Isolator with enclosure
3
-
738
Supply and fixing of following FP 415V, MCCB isolators in sheet steel powder coated enclosure with door interlock and padlock facility on surface confirming to IEC 60947-3 complete with all accessories, connections, testing and commissioning etc as required and as instructed by engineer in charge also making good any damages made during installation. - 40A FP MCCB Isolator with enclosure
2
-
952
Supplying, fixing, testing and commissioning following four pole and double pole , 415 volts and 240 volts, residual current circuit breaker with overload protection (RCBO) of the following rating and sensitivity current in the existing MCB SPN and TPN horizontal/vertical DB's complete with connections, etc. as required and instructed by engineer in charge/consultant.- 32A 100mA FP RCBO
4
-
3501
Supplying, fixing, testing and commissioning following four pole and double pole , 415 volts and 240 volts, residual current circuit breaker with overload protection (RCBO) of the following rating and sensitivity current in the existing MCB SPN and TPN horizontal/vertical DB's complete with connections, etc. as required and instructed by engineer in charge/consultant.- 40A 100mA DP RCBO
2
-
2306
Supplying, fixing, testing and commissioning following four pole and double pole , 415 volts and 240 volts, residual current circuit breaker with overload protection (RCBO) of the following rating and sensitivity current in the existing MCB SPN and TPN horizontal/vertical DB's complete with connections, etc. as required and instructed by engineer in charge/consultant.- 40A 100mA FP RCBO
2
-
3603
Supplying, fixing, testing and commissioning following four pole and double pole , 415 volts and 240 volts, residual current circuit breaker with overload protection (RCBO) of the following rating and sensitivity current in the existing MCB SPN and TPN horizontal/vertical DB's complete with connections, etc. as required and instructed by engineer in charge/consultant.- 63A 100mA FP RCBO
1
-
4093
Electrical Works - Cables and End Termination
-
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor power cable confirming to IS 7098 (part 1) ammended upto date. - 3.5C x 50sq.mm Al Cable
72
-
279
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor power cable confirming to IS 7098 (part 1) ammended upto date. - 4C x 25sq.mm Al Cable
64
-
195
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor power cable confirming to IS 7098 (part 1) ammended upto date. 4C x 16sq.mm Al Cable.
257
-
143
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor power cable confirming to IS 7098 (part 1) ammended upto date. - 4C x 10sq.mm Al Cable.
132
-
125
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor power cable confirming to IS 7098 (part 1) ammended upto date. - 4C x 6sq.mm Al Cable.
536
-
100
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor power cable confirming to IS 7098 (part 1) ammended upto date. -4C x 4sq.mm Al Cable.
486
-
88
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor power cable confirming to IS 7098 (part 1) ammended upto date. - 4C x 2.5sq.mm Cu Control Cable.
43
-
69
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor power cable confirming to IS 7098 (part 1) ammended upto date. - 2C x 16sq.mm Al Cable.
24
-
110
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor power cable confirming to IS 7098 (part 1) ammended upto date. - 2C x 2.5 Sq.mm Al Cable
462
-
63
Supply and laying and clamping of the following PVC sheathed unarmoured power cable conductor of best conductivity copper stranded conductor, 1.1kV grade strictly conforming to IS:1554 (Part-I) 1964 of the following sizes in meduin duty flexible / rigid conduit in cable tray /wall using factory made heavy gauge GI/painted MS clamps. Space between clamps not exceeding 60cms amd making good the damages colour washing etc as required. and instructed by engineer at site/consultant. -1C x 10 Sqmm Cu Flexible
60
-
49
Supply and laying and clamping of the following PVC sheathed unarmoured power cable conductor of best conductivity copper stranded conductor, 1.1kV grade strictly conforming to IS:1554 (Part-I) 1964 of the following sizes in meduin duty flexible / rigid conduit in cable tray /wall using factory made heavy gauge GI/painted MS clamps. Space between clamps not exceeding 60cms amd making good the damages colour washing etc as required. and instructed by engineer at site/consultant. -1C x 10 Sqmm Cu Flexible
60
-
87
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.Upto 35 sq. mm
836
-
144.25
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm
50
-
26.77
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
249
-
37.18
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
940
-
31.23
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
72
-
72.87
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm)
4
-
526.43
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm)
2
-
383.67
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)
6
-
379.21
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)
6
-
301.88
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. - 4C x 6 Sq mm.
2
-
381
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. - 4C x 4 Sqmm.
4
-
381
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. - 4C x 2.5 Sq mm
2
-
381
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 2C x 16 Sq mm
2
-
208
Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.-1C x 6 Sqmm Cu Flexible
20
-
26
Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required. -1C x 10 Sqmm Cu Flexible
20
-
26
Electrical Works - Diesel generator and Panel
-
-
-
Supply, installation, testing and commissioning of 3phase, 415V, 0.8pf 50hz. radiator cooled DG set of the rating 30 kVA. Detailed technical specification attached.
1
-
449133
EXHAUST PIPES - Supply, erection, commissioning of additional length of exhaust pipes of required size for 30KVA DG as specified by DG Vendor with long radius bend from residential silencer with necessary clamps, fixtures, civil works and painted with heat resistant, rust proof, bituminous paint of approved colors to a maximum of 10 m in stages of following sizes including suitable rain cap for top to avoid rain water entry. The distance between exhaust pipe at top and rain cap should be higher than diameter of pipe. It is also recommended that horizontal run of exhaust piping should slope downwards away from engine to the condensate trap. Silencer should be installed with drain plug at bottom. Fixing shall be done with proper clamps, expansion bolts, and all other acessories as instructed by the Engineer and the rate inclusive of all minor civil works required, bolts, clamps angle, channel, I section, necessary nut and bolt and all required accessories including cutting, hoisting, fixing in position and applying 2 coats of primer and 2 coats of enamel paint of approved quality etc as required in the steel works etc as required for istallation. Support to exhaust piping should be done in such a manner that load of exhaust piping is not exerted to turbocharger. Exhaust pipe height shall be 3m more than the top of any adjacent building withing 10m radius of the exhaust..
25
-
2119
SITC of MAIN PANEL WITH DG AMF. Detailed technical specification attached.
1
-
229588
Electrical Works - Metering Cubicle and UPS
-
-
-
Fabrication, supply, erection, testing and commissioning of cubicle Type, dust and vermin proof, wall mounted metering cubicle made out of 14SWG Thick CRCA sheet complete with hinged and earthed front doors with name plate, heavy duty rubber gaskets, removable gland plates including all accessories required for complete instalation as per KSEBL standard. The front door shall be with vision panel/glass for meter reading and locking arrangement. All opening parts of the panel shall be sealable. Meter - Single phase LT energy meter with necessary accessories required for complete installation. The meter shall be tested and aproval shall be taken from the concerned department (KSEBL) including all accessories required for complete installation and its connections and inter connections etc - 1 Set. 40 A DP Cutout fuse unit with neutral link - 1 Set. 40 A SDF unit with enclosure, handle operated type - 1 Set
1
-
12112
Supply, installation, testing, and commissioning of 7.5 kVA three phase UPS indoor (IP20) in stand alone configuration, with 15 min backup battery (SMF battery of reputed approved make), input pf.96, less input current consumption, THDi should be < 5 % with full Load without additional Filters, builtin Isolation Transformer with necessary battery circuit breaker, true online double conversion technology with input 415V, 50Hz three phase, output 230V, 50Hz single phase, IGBT based PWM design with DSP control. It shall be 100% generator compatible. The UPS shall be supplied with battery rack and links for battery banks etc with all accessories required for complete installation as required . The acoustic noise of the system should be less than 58dB. The system shall be true online double - conversion DSP based UPS system. The system shall comply to BIS, ISO 9001 : 2008 , 14001 : 2004 , OHSAS 18001 : 2007 and relevant IS standard.
1
-
193189
Electrical Works -Light Fixture
-
-
-
Supply of 18W (+/-10% tolerance) 4ft LED luminaire having /= 1500 lm system output (Luminaire lumen output). ANSI rated LEDs from reputed makes should be provided. Luminaire efficacy should be greater than or equal to 85 lumens/watt and with minimum 2 KV surge protection. Catalog Number : Wipro LL20-221-XXX-65-NE TrimLED Neo / Crompton:LDSL-20-CDL / Equivalent Philips. Note: Light fixtures complete with all necessary accessories including suspenders, PVC Flexible pipes, adopters, connectors etc as required (Sample shall be approved by the engineer in charge). The installation shall be complete in all respects.
65
-
285
Supply of 15W (+/-10% tolerance) LED Downlighter having /= 1400 lm system output (Luminaire lumen output). ANSI rated LEDs from reputed makes such as Nichia, Japan / Cree, USA / Bridgelux, USA / Lumiled USA / Citizen Japan / Osram should be provided. Luminaire efficacy should be greater than or equal to 85 lumens/watt and with minimum 2 KV surge protection. Catalog Number : Wipro LD90-191-XXX-65-XX Recess mounted / Crompton: LCDN-15-CDL / Equivalent Philips Make. Note: Light fixtures complete with all necessary accessories including suspenders, PVC Flexible pipes, adopters, connectors etc as required (Sample shall be approved by the engineer in charge). The installation shall be complete in all respects.
19
-
1394
Supply of 18W (+/-10% tolerance) LED Surface Mounted Downlighter having /= 1300 lm system output (Luminaire lumen output). ANSI rated LEDs from reputed makes such as Nichia, Japan / Cree, USA / Bridgelux, USA / Lumiled USA / Citizen Japan / Osram should be provided. Luminaire efficacy should be greater than or equal to 85 lumens/watt and with minimum 2 KV surge protection. Catalog Number :: Wipro LD81-171-XXX-60-XX Surface Mounted / Crompton: LCDSPLN-S-18-CDL / Equivalent Philips Make. Note: Light fixtures complete with all necessary accessories including suspenders, PVC Flexible pipes, adopters, connectors etc as required (Sample shall be approved by the engineer in charge). The installation shall be complete in all respects..
51
-
1821
Supply of functional Ultra Sleek LED luminaire HIgh efficiency LED with System efficacy of =150 Lumen per watt and system lumen not less than 17500 Lumens and 5000K-5500K CCT range. Driver shall be Potted with IP67 protection.Body shall be made of high purity Aluminium heat sink with specially designed heat fins for better heat dissipation and factory fitted eye bolt for easy installation. Luminaire wattage should not exceed 120W. LED flight @ 50000 Hours for L70 THD <10% The Luminaire should have IP65 protection with die cast Aluminium Housing with in-build LENS for 60 Degree beam angle. There should be in-built surge protection of minimum 4 KV & THD shall be less than 10%THE LED shall comply to ANSI Bin C78.377A and IEC62471 for LED Photo biological safety report. LM80 &LM79 report from NABL accredited Lab shall be submitted for verification. Similar to Wipro Make LH17-192-060-50-XX or equivalent. Note: Light fixtures complete with all necessary accessories including suspenders, PVC Flexible pipes, adopters, connectors etc as required (Sample shall be approved by the engineer in charge). The installation shall be complete in all respects.
25
-
12544
Supply, fixing, testing and commissioning of 7 M octagonal poles of approved Make having top dia 70 mm, bottom dia 130 mm, Sheet thickness 3 mm, pitch circle dia (PCD) of 200 mm, Base plate dimensions 200mm length x 200mm breadth x 12mm thickness, EN8 grade Foundation bolts of size 4 x 20 mm dia, having bolt length of 600 mm. The Octagonal Poles shall be designed to withstand the maximum wind speed as per IS 875. The pole shaft shall have octagonal cross section and shall be continuously tapered with single longitudinal welding. There shall not be any circumferential welding. The octagonal Poles shall have door of approximate 500 mm length at the elevation of 500 mm from the Base plate. The door shall be vandal resistance and shall be weather proof to ensure safety of inside connections.. The door shall be flush with the exterior surface and shall have suitable locking arrangement. There shall also be suitable arrangement for the purpose of earthing. Material Octagonal Poles HT Steel Conforming to grade S355JO. Base Plate Fe 410 conforming to IS 226 / IS 2062 Foundation Bolts EN.8 grade (Similar to Make - Bajaj or Equivalent). The poles shall be hot dip galvanized as per IS 2629 / IS 2633 / IS 4759 standards with average coating thickness of 85 micron. The galvanizing shall be done in single dipping. The pole shall be with one arm of minimum 1 meter long with 70 W LED fixture (Similar to Wipro Make LR02-781-XXX-57-XX or equivalent). The cost inclusive of all material required for complete installation including light fixture, pole, foundation etc. required as per the specification. Pole similar to Bajaj or equivalent.
17
-
26271
Supply,Installation, testing and commissioning of 12.5 meter high mast pole with 6 Nos high power LED luminare to ensure uniform distribution, higher spacing between poles and maintenance free system suitable to mount for 6 Nos 150W Flood Light. The cost including Supply, erection, testing and commissioning of hot dip galvanized (both internally & externally), Thickness of Galvanization(min.) 65 mic for sheet thick-2mm upto 5 mm and Anti-Vandalism lock facility. With six arm high mast light pole of octagonal cross-section of 12.5 m length with sturdy base plate of suitable size as per IS.2713 of 1980 on concrete plinth, and able to withstand wind Load capability as specified in IS 875, with pole top min. 150mm dia and bottom min. 340mm dia providing separate adequate size pipes for incoming and outgoing power cables and earth wires to the cable termination box of standard size of hensel make or equivalent box with IP 67 protection provided on the bottom of the tubular pole.. Required nos. of foundation bolts of size to suit the holes of the base plate of the pole shall be cast vertically in the concrete, using template, the threaded portion protruded outside the plinth shall be applied with galvanised paint. suitable MCB, neutral link, earthing with terminating facility and suitable terminal block etc. shall be fixed in the termination box as required. The post shall be wired using 3 core 2.5 mm sq. FRLS PVC insulated copper cable. Cost inclusive of supply, installation and testing and commisisioning of high mast pole with lights with all accessories required for complete installation including civil foundation, pole, light fixture with panel boards, earthing system etc. Light fixture similar to Wipro make LF07-152-060-50-V5 or equivalent. The light fixture should be COB type. Pole similar to Bajaj or equivalent.
1
-
221116
Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.1200mm sweep -5star rated ceiling fan complete with 300mm down rod , canopies, shackeles and blades and resistance type regulator working on 230V/240V single phase A/C
24
-
1868.63
Supply of exhaust fan of 250mm sweep in the existing opening, including making good the damage, connection, testing, commissioning etc. as required, including all accessories as required for complete installation including shutter etc complete as required. (havells, Ventil Air DX White or equivalent)
6
-
1621
Electrical Works -Ventilation System
-
-
-
Ventilation System - Toilet Exhaust Fans : Supply, installation, testing and commissioning Direct driven axial flow (inline) fans suitable for mounting on wall or duct in standard galvanized / powder coated steel construction &; louvers with required rating, single motor and flexible connection to connect with ducting / plenum.-800 CFM
1
-
19856
Ventilation System - Toilet Exhaust Fans : Supply, installation, testing and commissioning Direct driven axial flow (inline) fans suitable for mounting on wall or duct in standard galvanized / powder coated steel construction & louvers with required rating, single motor and flexible connection to connect with ducting / plenum.-500 CFM
1
-
11468
Ventilation System - Toilet Exhaust Fans : Supply, installation, testing and commissioning Direct driven axial flow (inline) fans suitable for mounting on wall or duct in standard galvanized / powder coated steel construction & louvers with required rating, single motor and flexible connection to connect with ducting / plenum.-200 CFM
1
-
6386
Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Factory fabricated GSS sheet metal rectangular ducting as per IS 655-2006
25
-
1098.97
Supply, Fabrication, installation and testing of the flexible ducting, complete with connecting rings, duct supports, butterfly dampers, plenum box etc as per standards and specification -100mm dia
30
-
169
GRILLES & DIFFUSERS : Supply and fix the following grilles and diffusers as per specifications. Machine made, powder coated, supply and return air grilles and diffusers of design to be approved (material : Al) Return air grille with vcd.
0.5
-
8380
Electrical Works - Earthing
-
-
-
SITC of CPRI tested maintenance free ,Low carbon copper coated earth rod of 3 metre electrode having diameter of 20mm with copper coating thickness of 250micron tested as per IEC 62561-2 & is provided with universal clamp made of SS to connect rod with flat conductor. Earth conductivity enhancing mineral compound shall be of 25 kg/pit tested as per IEC 62561-7,TCLP tested. The above arrangements shall be provided with Heavy duty earth chamber of dimension 300mmx 300mmx 170mm with 5000kg load bearing capacity to ensure the safety of earthing system
4
-
12712
Supply and laying the following sizes of Cu strips laid 0.6 m below ground level including excavating trench of suitable size and refilling, including necessary clamps and bolts etc and all accessories as required for complete installation as instructed by engineer in charge/consultant. - 25x3 Cu strips tinned at the joints.
94
-
483
Supply and laying the following sizes of Cu strips laid 0.6 m below ground level including excavating trench of suitable size and refilling, including necessary clamps and bolts etc and all accessories as required for complete installation as instructed by engineer in charge/consultant. - 32x3 Cu strips tinned at the joints.
36
-
597
Supply and laying the following sizes of earthing bare copper/strips on cable tray or wall surface, including necessary clamps (each clamp not exceeding 60 cm) and bolts etc as required for complete installation as instructed by engineer in charge/consultant. 25x3 Cu strips tinned at the joints.
48
-
551
Providing and fixing 10 SWG copper wire on surface or in recess for loop earthing as required.
1650
-
55
Providing and fixing 08 SWG copper wire on surface or in recess for loop earthing as required..
264
-
82
Electrical Works -Miscellaneous Items
-
-
-
Supply and providing 6 mm thick and 1 m wide electrical grade chequered type rubber mat to withstand 3.3 kV dielectric strength conforming to IS 5429/1969
1
-
657
Supply and providing First Aid Box.
1
-
847
Supply and providing laminated First Aid chart duly framed and placed in a conspicuous location for clear vision.
1
-
187
Supply & fixing Laminated drawings of electrical lay out, schematic drawing etc on good frame work.
1
-
2119
Plumbing
-
-
-
Providing and fixing white vitreous china water closet squatting pan ( Indian type):Orissa pattern W.C. pan of size 580x440 mm
9
-
2166.11
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre / 8 litres), including seat cover, and cistern fittings, nuts bolts and gasket etc complete.
4
-
14403.6
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x400mm with single 15 mm C.P.brasspillar taps
8
-
2702.58
Washbasin - Providing, Fixing, Testing and Commissioning at site Wash Basin, Waste coupling, Flexible waste connection pipe etc., including painting of fittings and brackets, cutting and making good the walls wherever required. . Oval Wash basin Below Counter. Hindware Round Cat No 10065 or Equivalent.
4
-
2686.44
Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms
4
-
277.05
Providing & fixing white vitreous china water less urinal of size 600 x 330 x 315 mm having antibacterial / germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal .
4
-
22367.1
Providing and fixing PTMT 15 mm Urinal spreader size 95 x 69 x 100 mm with 1/2" BSP thread and shapes, weighing not less than 60 gms.
4
-
158.38
Providing and fixing PTMT urinal cock of approved quality and colour.15 mm nominal bore, 80 mm long 42 mm high and 30 mm wide with BSP female threads weighing not less than 48 gms .
4
-
214.07
Health Spray Faucet - Providing, Fixing, Testing and Commissioning at site ablution Health Spray Faucet with wall hook and 1 mtr. Chrome plated PVC hose Tube, Angle cock etc. complete in all respects.. Cat No: Jaquar -ALD-CHR-585, Angle Cock Jaquar. FLR 5053 N or Equivalent Hand Shower (Health Faucet)(ABS Body) With 1 mtr long PVC Tube & Wall Hook..
4
-
1199.16
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:100 mm diameter
5
-
106.55
Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 893115 mm nominal bore
5
-
811.88
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
10
-
1216.37
Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fittings arrangements, weighing not less than 106 gms.
5
-
167
Providing and fixing C.P brass bib cock of approved quality conforming to IS: 8931.15 mm nominal bore
20
-
552.76
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink with drain board - 510 x 1040 mm bowl depth 225 mm
1
-
5696.19
Sink cock wall mounted with swivel casted spout - Providing, Fixing, testing and commissioning Sink cock wall mounted with swivel casted spout and wall flange, trending, cutting and making good the walls wherever required. JAQUAR-CON-357KN Sink Cock with extended Swinging Spout (Wallmounted model) With Wall Flange or Equivalent
1
-
1088.14
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighting not less than 190 gms
5
-
628.6
uPVC pipe (SWR-Type B) 110mm OD - Providing, Fixing, testing and commissioning at site in position uPVC pipe (SWR-Type B) (IS:13592) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, coupling, door bends, junctions, cowls, etc., complete. (In Shaft & Ceiling) - 110 mm O.D. (SWR Type-B- IS- 13592). Astral or Equivalent.
16
-
922.88
uPVC pipe (SWR-Type B) 75mm OD - Providing, Fixing, testing and commissioning at site in position uPVC pipe (SWR-Type B) (IS:13592) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, coupling, door bends, junctions, cowls, etc., complete. (In Shaft & Ceiling) - 75 mm O.D.(SWR Type-B- IS-13592). Astral or Equivalent.
8
-
603.39
uPVC pipe (SWR-Type A) 110mm OD- Providing, Fixing, testing and commissioning at site in position uPVC pipe (SWR-Type A) (IS:13592) or ( IS : 4985 ) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, coupling, etc. complete. (For Rain water pipes above porch) - 110mm O.D Type A. Astral or Equivalent.
36
-
539.83
uPVC pipe (SWR-Type A) 63mm OD - Providing, Fixing, testing and commissioning at site in position uPVC pipe (SWR-Type A) (IS:13592) or ( IS : 4985 ) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, coupling, etc. complete. (For Rain water pipes above porch) - 63 mm O.D ( 4Kg/cm2) Vent pipe in shaft. Astral or Equivalent.
15
-
321.19
uPVC pipe of 6Kg/sq.cm & SWR Type B 50mm OD - Providing, Fixing, testing and commissioning at site in position u PVC pipe of 6Kg/sq.cm (IS:4985) & SWR Type B IS 13592 including PVC fittings with bosses where required e.g. tees, bends, coupling and adapters and jointing with adhesive approved by fitting manufactures including cutting and making good the walls and floors or surface mounted with clamps as required at site universal clamps & anchor fasteners(8mm) , threaded rod(8mm),nuts, washers, wherever required etc. complete.(For Internal Soil &Waste line) - 50 mm O.D. (6Kg/cm2 IS:4985). Astral or Equivalent.
22
-
389.83
uPVC pipe of 6Kg/sq.cm & SWR Type B 75mm OD - Providing, Fixing, testing and commissioning at site in position u PVC pipe of 6Kg/sq.cm (IS:4985) & SWR Type B IS 13592 including PVC fittings with bosses where required e.g. tees, bends, coupling and adapters and jointing with adhesive approved by fitting manufactures including cutting and making good the walls and floors or surface mounted with clamps as required at site universal clamps & anchor fasteners(8mm) , threaded rod(8mm),nuts, washers, wherever required etc. complete.(For Internal Soil &Waste line) - 75 mm O.D. (SWR Type B IS 13592). Astral or Equivalent.
88
-
663.56
uPVC pipe of 6Kg/sq.cm & SWR Type B 110mm OD - Providing, Fixing, testing and commissioning at site in position u PVC pipe of 6Kg/sq.cm (IS:4985) & SWR Type B IS 13592 including PVC fittings with bosses where required e.g. tees, bends, coupling and adapters and jointing with adhesive approved by fitting manufactures including cutting and making good the walls and floors or surface mounted with clamps as required at site universal clamps & anchor fasteners(8mm) , threaded rod(8mm),nuts, washers, wherever required etc. complete.(For Internal Soil &Waste line) - 110 mm O.D. (SWR Type B IS 13592). Astral or Equivalent.
74
-
837.91
Supplying, Installing, Testing & commissioning at site in position 110 mm dia PVC Rodding Eye (6 kg/cm2) complete in all respects.
2
-
458.48
Supplying, Installing, Testing & commissioning at site in position 75 mm dia PVC Rodding Eye (6 kg/cm2) complete in all respects.
2
-
389.83
Deep Seal uPVC fabricated Multi floor trap - Providing, Fixing, testing and commissioning at site in position Deep Seal UPvc fabricated Multi floor trap (7 inch), with suitable supporting on GI slotted rails (1.6mmthick) full threaded rod, anchor fasteners etc. complete in all respects - 50/75 mm dia outlet (In Ceiling)
6
-
581.35
uPVC fabricated Multi floor trap- Providing, Fixing, testing and commissioning at site in position UPvc fabricated Multi floor trap (4 inch), with 50/75 mm dia outlet (In Sunken slab & floor raising areas)
24
-
442.37
Concealed floor trap - Providing, Fixing, testing and commissioning at site in position Concealed floor trap (7” Deep Seal UPVC fabricated Multi floor trap with Stainless Steel Square frames (150x150mm) SS(304), Rubber Seal and flat round cover with screw and suitable supporting on GI slotted rails (1.6mmthick) full threaded rod, anchor fastenersetc.complete in all respects - 50/75 mm dia outlet (For Urinals In Ceiling)
1
-
1057.63
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm nominal outer dia pipes
105
-
423.6
C.P. cast brass or stainless steel anti cockroach grating cover - Providing,Fixing, testing and commissioning at site 150x150 mm square C.P. cast brass or stainless steel anti cockroach grating cover SS (304) of matching size of UPvc fabricated floor trap / multi inlet trap complete in all respects
30
-
747.46
0.25 inch (20mm) dia uPVC Pipes (as per ASTM D – 1785 sch-40 ) of approved make for Cold Water Supply - Providing, fixing, pressure test and commission Exposed Cold Water Services Pipe Work, with High Pressure uPVC Pipes, Sch. 40 (ASTM D 1785) and with all necessary (ASTM D – 2466/2467) Fittings, including fixing the pipe with clamps at required spacing. This includes jointing of pipes & fittings with one step solvent cement for pressure pipes and fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / In shaft) - 0.25 inch (20mm) dia. Astral or Equivalent"
55
-
222.88
1 inch(25mm) dia uPVC Pipes (as per ASTM D - 1785 sch-40 ) of approved make for Cold Water Supply - Providing, fixing, pressure test and commission Exposed Cold Water Services Pipe Work, with High Pressure uPVC Pipes, Sch. 40 (ASTM D 1785) and with all necessary (ASTM D – 2466/2467) Fittings, including fixing the pipe with clamps at required spacing. This includes jointing of pipes & fittings with one step solvent cement for pressure pipes and fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / In shaft) - 1 inch (25mm) dia. Astral or Equivalent"
50
-
263.56
1.25 inch (32mm) dia uPVC Pipes (as per ASTM D - 1785 sch-40 ) of approved make for Cold Water Supply - Providing, fixing, pressure test and commission Exposed Cold Water Services Pipe Work, with High Pressure uPVC Pipes, Sch. 40 (ASTM D 1785) and with all necessary (ASTM D – 2466/2467) Fittings, including fixing the pipe with clamps at required spacing. This includes jointing of pipes & fittings with one step solvent cement for pressure pipes and fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / In shaft) - 1.25 inch (32mm) dia. Astral or Equivalent"
25
-
277.97
1.5 inch (40mm) dia uPVC Pipes (as per ASTM D -1785 sch-40 ) of approved make for Cold Water Supply - Providing, fixing, pressure test and commission Exposed Cold Water Services Pipe Work, with High Pressure uPVC Pipes, Sch. 40 (ASTM D 1785) and with all necessary (ASTM D – 2466/2467) Fittings, including fixing the pipe with clamps at required spacing. This includes jointing of pipes & fittings with one step solvent cement for pressure pipes and fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / In shaft) - 1.5 inch (40mm) dia Astral or Equivalent"
10
-
337.29
1.25 inch (32mm) duPVC Pipes (as per ASTM D - 1785 sch-80 ) of approved make For Pumping line - Providing, fixing, pressure test and commission at site in position uPVC Pipes (as per ASTM D – 1785 sch-80 ) of approved make For Pumping line including fixing the pipe with clamps at required spacing. This includes jointing of pipes & fittings with one step solvent cement for pressure pipes and fittings (elbows, unions, tees, reducers, couplings, nipples etc) - 1.25 inch (32mm) dia
160
-
313.56
Brass ball valve 20mm dia - Providing, Fixing at site in position full way lever operated forged Brass ball valve (screwed end)of brass body with forged brass hard chrome plate (PN 10) of approved make with necessary MTA fittings in position as per drawing - 0.75 inch (20mm) dia
31
-
421.18
Brass ball valve 25mm dia - Providing, Fixing at site in position full way lever operated forged Brass ball valve (screwed end)of brass body with forged brass hard chrome plate (PN 10) of approved make with necessary MTA fittings in position as per drawing - 1 inch (25mm) dia
6
-
627.96
Brass ball valve 32mm dia - Providing, Fixing at site in position full way lever operated forged Brass ball valve (screwed end)of brass body with forged brass hard chrome plate (PN 10) of approved make with necessary MTA fittings in position as per drawing - 1.25 inch (32mm) dia
5
-
1036.44
Brass ball valve 40mm dia - Providing, Fixing at site in position full way lever operated forged Brass ball valve (screwed end)of brass body with forged brass hard chrome plate (PN 10) of approved make with necessary MTA fittings in position as per drawing - 1.5 inch (40mm) dia
4
-
1483.9
65mm (2.5inch )Water Meter Providing, fixing, testing and commissioning at site Class: B, as per IS: 779 or 2373 (as per final requirement) / ISO: 4064 and as per Tender Tech. Specifications. Water Meters shall be tested by Government / Approved Board / Agencies and to the approval of Kerala Water Authority, complete with bolts, nuts, rubber gaskets etc. and all necessary accessories etc.
2
-
14152.54
uPVC pipe of IS 4985(6kg/cm2) of 110mm OD - Supplying & Laying of pipes and conveying to position; cleaning, laying and jointing to true lines and gradients, uPVC pipe of IS 4985(6kg/cm2) including excavation, refilling, jointing the pipe as per specification, testing the pipe line after installation all per provisions of IS: 1742-1983 (Code of practice for building drainage) complete - 110mm OD. Astral or Equivalent
115
-
602.54
uPVC pipe of IS 4985(6kg/cm2) of 160mm OD - Supplying & Laying of pipes and conveying to position; cleaning, laying and jointing to true lines and gradients, uPVC pipe of IS 4985(6kg/cm2) including excavation, refilling, jointing the pipe as per specification, testing the pipe line after installation all per provisions of IS: 1742-1983 (Code of practice for building drainage) complete - 160mm OD. Astral or Equivalent.
145
-
1109.33
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia
117
-
335.27
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weigh of cover 23 kg and weight of frame 15 kg):With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
20
-
12839.77
Gully Trap - Providing & Fixing square mouth S.W Gully Trap class SP. 1 complete with C.I . grating brick masonry chamber with water tight C.I. Cover with frame of 300 X 300 mm size (Inside) the weight of cover to be not less than 4.50 Kg and frame not to be less than 2.70 Kg as per standard - 150 X 100 mm size P type with sewer bricks conforming to IS 4885:
7
-
5488.13
Constructing masonry chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:With common burnt clay F.P.S (non modular) bricks of class designation 7.5
2
-
1777.6
Core cutting in RCC beams / slabs / floors etc. 50mm dia - Drilling with core cutting machine in RCC beams, slabs floors etc., for laying pipes and rendering the same in RCC 1:2:4,finishing the same to the satisfaction of the Owner or his authorized representative etc., including nominal reinforcement wherever required, complete. The quoted rate shall also include for providing (conbextra GP -2/GP – 10) based water proofing compound for sealing the joints around the pipes - 50mm dia in RCC Slabs (For Wash Basin, EWC & Floor Trap)
2
-
733.89
Core cutting in RCC beams / slabs / floors etc. 110mm dia - Drilling with core cutting machine in RCC beams, slabs floors etc., for laying pipes and rendering the same in RCC 1:2:4,finishing the same to the satisfaction of the Owner or his authorized representative etc., including nominal reinforcement wherever required, complete. The quoted rate shall also include for providing (conbextra GP -2/GP – 10) based water proofing compound for sealing the joints around the pipes - 110mm dia in RCC Slabs (For Wash Basin, EWC & Floor Trap)
8
-
516.95
Hydro Pneumatic system for Garage - Providing, Fixing, testing and commissioning Hydro Pneumatic system with 2 Nos Vertical Multistage pump set with SS impeller and SS Shafts. Each pump capable to deliver 5lps @ 3 Bar, 20mtrs head and with 3KW / 4 hp motor with 3 phase connection. Suction and Delivery of each pumps to be connected to GI manifolds of suitable size with isolation ball valves at suction & delivery and NRV at delivery of each pump. A common control panel to operate the pump set as 1 working + 1 standby/ assist, according to the demand. Control panel Should be with fixed speed Microprocessor based , Haning cycle based cascading system,Dry Run Protection,Overload protection etc . The entire system to be supplied with all the pump sets and control panel assembled in a common GI Skid completely assembled and tested at factory for the duty points along with pressure vessel 200 ltr .Brand CRI or Equivalent
1
-
293864.4
Hydro Pneumatic system for Office - Providing, Fixing, testing and commissioning Hydro Pneumatic system with 2 Nos Vertical Multistage pump set with SS impeller and SS Shafts. Each pump capable to deliver 3lps @ 2.5 Bar, 20mtrs head and with 1.1KW/ 1.5 hp motor with 3 phase connection . Suction and Delivery of each pumps to be connected to GI manifolds of suitable size with isolation ball valves at suction & delivery and NRV at delivery of each pump. A common control panel to operate the pump set as 1 working + 1 standby/ assist, according to the demand. Control panel Should be with fixed speed Microprocessor based , Haning cycle based cascading system,Dry Run Protection,Overload protection etc . The entire system to be supplied with all the pump sets and control panel assembled in a common GI Skid completely assembled and tested at factory for the duty points along with pressure vessel 200 ltr .Brand CRI MVHS808T x 2 - 1E or Equivalent
1
-
236675.43
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
-
30755.46
Polyethylene water storage tank 20000 - Providing and fixing rectangular / circular FRP water storage tank with cover, conforming to ISI : 12701 of approved make as approved as directed by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet, floating valve & over flow pipes with all necessary accessories required for complete installation. The base support for tank shall be paid separately.
1
-
592939.83
Polyethylene water storage tank 5000 - Providing and fixing recangular / circular FRP water storage tank with cover, conforming to ISI : 12701 of approved make as approved as directed by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet, floating valve & over flow pipes with all necessary accessories required for complete installation. The base support for tank shall be paid separately.
1
-
148234.74
Effluent Treatment Plant (ETP) - Supply, fix at site in position, testing, commissioning and maintain during defect liability period 30 KLD Effluent Treatment Plant with all machinery, equipment and materials inclusive all necessary accessories required for complete installation as per drawings and technical specifications complete set as required. Necessary approval from concerned department shall also be included in the scope of services if necessary.
1
-
353500
ELV System - Data
-
-
-
Information Outlet RJ 45 - Supply, fixing, testing and commissioning of RJ45, CAT6 modular Information Outlets with Modular Shuttered Faceplate with shutter, Single Port, white, jack, suitable PVC / GI Modular Box, base & cover plate etc including necessary connections with all accessories required for complete installation as directed by the Engineer in charge.
24
-
398
Supply, Installation, Testing and installation of Cat - 6 shuttered type 24 port fully loaded patch panel with necessary cable manager with all accessories required for complete installation as required as directed by the engineer in charge.
2
-
5725
Supply, Installation, Testing and installation of Cat - 6 shuttered type 12 port fully loaded patch panel with necessary cable manager with all accessories required for complete installation as required as directed by the engineer in charge.
1
-
4453
Supply, Installation, Testing and installation of Cat - 6 layer 3 POE 24 port fully loaded switch of RJ-45 connector with rack mounting brackets, input connector shall be as per IEC-320-C14 with all accessories required for complete installation as required as directed by the engineer in charge.
2
-
16949
Supply, Installation, Testing and installation of Cat - 6 layer 3 POE 8 port fully loaded switch of RJ-45 connector with rack mounting brackets, input connector shall be as per IEC-320-C14 with all accessories required for complete installation as required as directed by the engineer in charge.
1
-
14407
Supply, installation, testing and commissioning of Rack with Front glass door, Rear Perforated door with handle Lock & key. Front/Rear 4U mounting angles, top, bottom open, RAL 9005 with all other accessories required for complete installation as directed by the engineer in charge.
1
-
5665
Supply, installation, testing and commissioning of Rack with Front glass door, Rear Perforated door with handle Lock & key. Front/Rear 6U mounting angles, top, bottom open, RAL 9005 with all other accessories required for complete installation as directed by the engineer in charge.
1
-
8301
CAT6 Cable - Supplying and drawing of Category 6 cable consists of 4 pairs of solid insulated copper 23AWG cable through surface/ recessed medium class PVC conduit in wall / tray with all accessories as required for complete installation and as instructed by engineer in charge/consultant and making good all damages made for installation.
749
-
77
Patch Cable - User Side - Supply, fixing, testing and commissioning of CAT6 Patch Cable - 2 Meter length etc. of approved make as required for complete installation.
48
-
197
Patch Cable - Hub Side - Supply, fixing, testing and commissioning of CAT6 Patch Cable - 1 Meter of approved make as required for complete installation.
48
-
184
ELV System - Voice
-
-
-
Information Outlet for Voice - Supply, fixing, testing and commissioning of CAT6 modular Information Outlets (Key stone) with Modular Shuttered Faceplate with shutter, Single Port, white, jack, suitable PVC / GI Modular Box, base & cover plate etc including necessary connections with all accessories required for complete installation as directed by the Engineer in charge.
9
-
398
Cable - Supplying and drawing of following pair telephone cable consists of 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable through surface / recessed medium class PVC conduit in wall/tray with all accessories as required for complete installation and as instructed by engineer in charge/consultant and making good all damages made for installation. - 10 Pair Telephone Cable
143
-
153
Cable - Supplying and drawing of following pair telephone cable consists of 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable through surface / recessed medium class PVC conduit in wall/tray with all accessories as required for complete installation and as instructed by engineer in charge/consultant and making good all damages made for installation.- 2 Pair Telephone Cable
238
-
60
Krone Box - Supply, erection, testing and commissioning of following pair krone Box with mounting frame of ISI grade with lockable front cover with all accessories required for fixing the box with all accessories required for complete installation in wall as directed by the Engineer in charge. - 10 pair
1
-
503
Supply, Installation, Testing and Commissioning of .PBX with 10 Analog extensions expandable up to 15 and 2 SIP License expandable up to 5 with maximum of 5 concurrent calls Network Interface: 1x10/100M LAN port 1 PRI interface, RAM: DDR3 1GB, Power Consumption: 12V/0.8A, 9.6W Maximum, Failover Function (Optional), Web Interface, Call Dashboard, DISA, IVR, Call Hunt etc..Features:Room monitoring from outside Warning Message during night mode. Remote Inspection, with auto-emergency call Sensor Connectivity with auto-emergency call and warning message sending Built-In Auto Answer.(Standby mode) during night mode TDM/IP Coverage ISDN Compatibility Voice Mail Integration Paging Announcement Programmable Function Keys.
1
-
101186
Supply, installation, testing and commissioning of Basic user phone with necessary connection as required for complete installation as directed by the engineer in charge.
9
-
933
Surge Protection Device For EPABX: The surge protection device with enclosure shall be suitable to protect telephone lines designed to with stand both lightning current and switching surges. Technology: GD tube, Nominal Voltage: 180 V, Pulsed Current (10/350 μs ) Iimp: 1 KA, Nominal Discharge Current (8/20 μs) /phase In: 5KA, Maximum discharge current: 10 KA, Voltage Protection Level (sym) 700V, Response time 1n sec
1
-
19025
ELV System - CCTV
-
-
-
Camera - Bullet - Supply, Installation,testing and commissioning of Varifocal Bullet Camera with 2 MP , built-in IR LED, , 2.8-10 mm, 20 to 30 meters IR range, IP 66 with all connectors and necessary accessories for mounting in false ceiling/True Ceiling as required for complete installation as directed by Engineer in charge. PoE (Power over Ethernet)
2
-
11931
Camera - Dome - Supply, Installation, testing and commissioning of IP based 2.8 mm fixed lens, 2MP (1920 × 1080) resolution,1/2.8. Progressive Scan CMOS Day/Night, IR dome camera, 20 to 30 meters IR range, 120dB digital WDR with all connectors and necessary accessories for mounting in false ceiling as required for complete installation as directed by Engineer in charge. PoE (Power over Ethernet)
7
-
5508
Network Video Recorder with Storage Server: Supply, installation, testing and commissioning of 16 Channel Network Video Recorder with Recording Storage space server for 30 days, Supports 16 channels 720 p resolution video recording at real time, NVR ONVIF supporting RAID5, Recording resolution of Max 12 MP, Minimum of 300Mbps of recording, should support dual video output, H.265,H.264, MJPEG Compression.video playback / relay at real time. Video storage expansion for recording for complete installation with all accessories as required and directed by engineer in charge. (Consider the sufficient HDDs for 720p@20FPS for 30 days recording for 9 Cameras)
1
-
58288
LED Display - Supply, installation, testing and commissioning of 32 inch full HD LED display for video wall arrangement for 24 x 7 Setup as required for complete installation with all accessories as required and directed by engineer in charge.
1
-
21631
CAT6 Cable - Supplying and drawing of Category 6 cable consists of 4 pairs of solid insulated copper 23AWG, surface/ recessed medium class PVC conduit through wall/tray with all accessories as required for complete installation and as instructed by engineer in charge/consultant and making good all damages made for installation.
376
-
35
ELV System - PAS
-
-
-
Ceiling Mounted Speaker - Supply, fixing, testing and commissioning of ceiling mount Metal Grille Speakers with inbuilt line matching transformer with power 6W with required accessories for installation as required.
1
-
1606
Wall Mounted Speaker - Supply, fixing, testing and commissioning of Cabinet Speakers with inbuilt line matching transformer and volume controller to adjust the volume individually, 12W with required accessories for installation as required.
20
-
1963
Mixing Amplifier - Supply, fixing, testing and commissioning of approved make 180 Watts Mixer Amplifier with inbuild USB, FM/AM Tuner with all accessories required for complete installation as required.
1
-
23305
Call Stations - Supply, fixing, testing and commissioning of Single Zone Calling Station with mic as per the drawing as required for complete installation.
1
-
29144
Audio/Video player - Supply, installation, testing & commissioning of Audio/Video player with USB option with all accessories like jacks and codes for complete instalation as required as directed by the Engineer in charge.
1
-
5059
Speaker Cable - Supplying and drawing of 2 Core, Twin Twisted, ATC tinned copper, overall sheathed, flexible Unarmored Speaker cable, 16 AWG for speakers through surface/ recessed medium class PVC conduit in tray / wall with all acessories as required for complete installation and as instructed by engineer in charge/consultant and making good all damages made for installation. Cost inclusive of all material including supply of cable, conduit, accessories etc
552
-
72
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements