INKEL Limited Tender
... More
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 50,000Document Cost
₹ 5,900Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_INKEL_360404_1Bid Award Id
ViewTender No
NIT/INKEL/TIDP/2020-21/137Tender Authority
INKEL Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Sub head - Earthwork
-
-
-
... More
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed: All Kinds of soil
317
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
190
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
891
-
-
... More
Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil
205
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
437
-
-
... More
Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
749
-
-
... More
Extra for conveying and depositing surplus earth beyond 50m and upto 1Km including loading and unloading as directed by Engineer- in-Charge.
109
-
-
... More
Conveying and depositing surplus earth for every additional 1Km lead and part thereof including loading and unloading as directed by Engineer- in-Charge.
109
-
-
... More
Sub head - Plain Cement Concrete Work
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
41
-
-
... More
Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
3
-
-
... More
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification .
1450
-
-
... More
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size).
34
-
-
... More
Diluting and injecting chemical emulsion for POST -CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion):Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
260
-
-
... More
Sub head - Reinforced Cement Concrete Work
-
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. (Note :- Minimum Cement content is 330 kg/cum and no payment shall be made for extra cement however contractor shall be bound to use required cement quantity as per the approved mix design). - All work upto plinth level
107
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. (Note :- Minimum Cement content is 330 kg/cum and no payment shall be made for extra cement however contractor shall be bound to use required cement quantity as per the approved mix design) - .All work above plinth level upto floor V level
149
-
-
... More
Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
263
-
-
... More
Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
234
-
-
... More
Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
545
-
-
... More
Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
556
-
-
... More
Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
254
-
-
... More
Centering and shuttering including strutting, etc. and removal of form for:Vertical and horizontal fins individually for forming box louvers band, facias and eaves boards
50
-
-
... More
Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges
113
-
-
... More
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
11267
-
-
... More
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
19887
-
-
... More
Add for plaster drip course / groove in plastered surface or moulding to R.C.C. projections.
111
-
-
... More
Sub head - Block Work
-
-
-
... More
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size of Grade C having average compressive strength 4N/mm^2 and individual compressive strength 3.2N/mm^2 as specified in IS 2185 part I of 2005 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
38
-
-
... More
Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size Grade C and having average compressive strength of 4N/mm^2 and individual compressive strength 3.2N/mm^2 as specified in IS 2185 Part I of 2005 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
113
-
-
... More
Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size of Grade C and having average compressive strength of 4N/mm^2 and individual compressive strength 3.2N/mm^2 as specified in IS 2185 Part I of 2005 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
18
-
-
... More
Sub head - Joinery/ Partition/ False ceiling Work
-
-
-
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS: 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors including cost of cutting floors, embeding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer -in- Charge.With stainless steel cover plate minimum 1.25 mm thickness
6
-
-
... More
Providing and fixing double action hydraulic floor spring Dorma or equivalent brand and conforming to IS:6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors including cost of cutting floors, embeding in floors as required and making good the same matching to the existing floor finishing and cover plates with SS/brass pivot and single piece SS sheet outer box with slide plate etc. complete as per the direction of Engineer -in- Charge. With stainless steel cover plate minimum 1.25 mm thickness.
3
-
-
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer of approved make (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
18
-
-
... More
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness of approved make. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
50
-
-
... More
Providing and fixing to existing door frames.30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames.
15
-
-
... More
Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc., complete.202x42x18 mm weighing not less than 78 gms
14
-
-
... More
Providing and fixing PTMT handles with necessary screws etc. complete.150x34x24 mm weighing not less than 26 gms
16
-
-
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately)
5
-
-
... More
Providing and fixing stainless steel TGD handles 32x600 mm as per direction of Engineer-in-Charge.
4
-
-
... More
Providing and fixing stainless steel TGD handles 32x300 mm as per direction of Engineer-in-Charge.
2
-
-
... More
Providing and fixing 100 mm size patch lock of approved make with Euro cylinder for glazed doors including necessary cutting and making good etc. Complete
2
-
-
... More
Providing and fixing in position frameless fixed glazing using 12mm Thick Clear Toughened Glass fixed Dorma WCP at Top and bottom or SS patch fittings as approved from finished floor level up to height of 2.1 meter. STO room, Supdt room etc.
18
-
-
... More
Supply and installation of 3M make frosted film pattern throughout all the internal glass panels wherever required of approx. 1.2 m height as per the approved pattern. - STO room, Supdt room, glass doors etc.
13
-
-
... More
Supply and installation of graphics pattern / instructions / images etc over fixed glass panels / doors of approx. 1.2 m height as per the approved pattern including all labour and other incidental charges etc. complete.
13
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron)
1498
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)
1065
-
-
... More
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 (exterior grade) Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides
12
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness of approved make.
12
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness of approved make.
52
-
-
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:100 mm
14
-
-
... More
Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-Charge.Powder coated minimum thickness 50 micron aluminium
8
-
-
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:300x10 mm
7
-
-
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:150x10 mm
7
-
-
... More
Providing and fixing stainless steel(43 grade) tubular handle bar 32 mm outer dia.,3 mm thick and 450 mm long with ss screws and all other required materials and sundries.
8
-
-
... More
Providing and fixing stainless steel (SS 304 grade) adjustable friction window stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer - in-Charge complete.255 x 19 mm
53
-
-
... More
Providing and fixing Powder coated Aluminium (min. thickness of powder coating 50 micrones) locking arrangement for sliding windows including necessary screws and fittings of approved make as directed by the engineer in charge.
6
-
-
... More
Providing and fixing UV stabilised colour film of approved make over the glass surface of sliding / openable windows.
25
-
-
... More
Providing and fixing powder coated Aluminium louvered Ventilators (minimum thickness of powder coating 50 microns) of approved colour HINDALCO or equivalent 9771, with 5mm thick frosted glass of approved make for aluminium U channel louvers including necessary grooves in frames for fixing glass etc. complete
2
-
-
... More
Supply and installation of ready made 20 gauge(0.8mm) galvanized iron sheet single leaf steel doors shutters including 16 gauge frame with same material, in - built locking arrangements, handle, bolts and other hardwares / accessories. The doors shall be powder coated or painted to glossy finish using anti - corrossive coatings to achieve a wooden surface finish. The door frames shall be fixed to the walls with anchor bolts/screws grouted and the gaps between frame and wall filled with cement sand mortar in CM 1:3. The doors shall be installed only after flooring works and the rates shall be inclusive of transportation, labour and other charges. (TATA Pravesh or equivalent).
5
-
-
... More
Supply and installation of ready made 20 gauge(0.8mm) galvanized iron sheet double leaf steel doors shutters including 16 gauge frame with same material, in - built locking arrangements, handle, bolts and other hardwares / accessories. The doors shall be powder coated or painted to glossy finish using anti - corrossive coatings to achieve a wooden surface finish. The door frames shall be fixed to the walls with anchor bolts/screws grouted and the gaps between frame and wall filled with cement sand mortar in CM 1:3. The doors shall be installed only after flooring works and the rates shall be inclusive of transportation, labour and other charges(TATA Pravesh or equivalent).
3
-
-
... More
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete:250x16mm
10
-
-
... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete:250x10 mm
5
-
-
... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete:150x10 mm
5
-
-
... More
Providing and fixing 100 mm brass locks of approved make for aluminium doors including necessary cutting and making good etc. complete
4
-
-
... More
STRONG ROOM DOOR: Supply and Installation of BIS Labelled Class 2 DD Door conforming to I.S. 11188/1991 Godrej or equivalent make with Exhaust fan and Ventilation arrangement made of 25 mm slab of Torch and Drill resistant Matrix Slab with a 65 mm Double Duty Barrier making it virtually invincible from attacks of Sledge hammers/hydraulic jacks/powerdrills/torch and oxy acetylene flame,Locks and relocking devices should be protected by specially designed drill defeat shield , Godrej or equivalent make superior quality dual control high precision 8 lever locks to be provided. All steel components should have undergone a 12 stage anti corrosion treatment followed by rust inhibiting paint for greater protection against fire. Six pockets of 5"*5"*5" should be provided, 3 pockets on either side from inner side of strong door. It should have 4 Recesses of 6"*4"*1" on outer side of wall. Overall size of the door should be 2178*1250 with a weight of 1000 kg and should be TRTL 30 and FR 30 type as per IS 11188:1991. Product should be BIS Certified and having authorised dealer Network for Sales and Services all over Kerala.
1
-
-
... More
Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.12.5 mm thick fully Perforated Gypsum Board tile made from plaster board having glass fibre conforming to IS: 2095 Part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with centre borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side , having as NRC ( Noise Reduction Co efficient) of 0.79, with 50 mm resin bonded glass wool backing.
6
-
-
... More
Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with Zinc coating of 120 gms/ (both side inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.75 mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum board conforming to IS : 2095 : part I
26
-
-
... More
Sub head - Steel Work
-
-
-
... More
Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc
1083
-
-
... More
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
1782
-
-
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts,locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer .
7
-
-
... More
Supplying and providing Bird net with weld mesh ( 16 Guage) - size of hole 25 x 25 mm or nearest available size fixed to the structural frame as per the drawings and specification
36
-
-
... More
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
400
-
-
... More
Sub head - Flooring and Waterproofing Work
-
-
-
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including keeping approximately 3mm spacer between the tiles and grouting the gap with epoxy of suitable colour and matching pigments etc., complete. Size of Tile 300x300 mm. (Note - Basic Price of tile - Rs 380/sqm. Any savings/reduction in basic price shall be accounted in the bill on pro rata basis )
34
-
-
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including keeping approximately 3mm spacer between the tiles and grouting the gap with epoxy of suitable colour and matching pigments etc., complete. Size of Tile 600 x 600 mm.
(Note - Basic Price of tile- Rs 430/sqm. Any savings/reduction in basic price shall be accounted in the bill on pro rata basis )
190
-
-
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, Cover 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), Jointing with grey cement slurry @ 3.3 kg/ sqm including keeping approximately 3mm spacer between the tiles and grouting the gap with epoxy of suitable colour and matching pigments etc., complete. Size will be as
per requirement. Size of Tile 600x600 mm (Note - Basic Price of tile - Rs 430/sqm. Any savings/reduction in basic price shall be accounted in the bill on pro rata basis )
22
-
-
... More
Providing and laying Ceramic glazed floor tiles of size 600x600 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.mincluding keeping approximately 3mm spacer between the tiles and grouting the gap with epoxy of suitable colour and matching pigments etc., complete. (Note - Basic Price of tile - Rs 380/sqm. Any savings/reduction in basic price shall be accounted in the bill on pro rata basis )
205
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles of size 600x600mm conforming to IS: 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black as approved by Engineerin- Charge, in skirting, risers of steps and dados,
over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including keeping approximately 3mm spacer between the tiles and grouting the gap with epoxy of suitable colour and matching pigments etc., complete. (Note - Basic Price of tile - Rs 380/sqm. Any savings/reduction in basic price shall be accounted in the bill on pro rata basis)
131
-
-
... More
Supplying and filling Cement Sand mix 1:10 including cost and conveyance of all materials, labour charges for compacting, levelling, curing etc., complete. - All toilets
1
-
-
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
30
-
-
... More
Sub head - Finishing
-
-
-
... More
Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 ( cement : 3 fine sand).
910
-
-
... More
20 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)
5
-
-
... More
15 mm cement plaster on rough side of single or half brick wall of mix:1:6 ( 1 cement : 6 coarse sand)
326
-
-
... More
12 mm thick plain cement mortar bands in cement mortar 1:4 ( 1 cement : 4 fine sand) :Flush Band
9
-
-
... More
Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster
121
-
-
... More
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.
1250
-
-
... More
15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix:1:3 ( 1 Cement : 3 fine sand)
10
-
-
... More
12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).
847
-
-
... More
15 mm cement plaster on the rough side of single or half brick wall of mix:1:6 ( 1 cement : 6 fine sand)
637
-
-
... More
15 mm cement plaster on the rough side of single or half brick wall of mix:1:4 (1 cement :4 fine sand)
218
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
706
-
-
... More
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
2307
-
-
... More
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
1671
-
-
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
902
-
-
... More
Finishing walls with textured exterior pint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm
160
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
7
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .
166
-
-
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
51
-
-
... More
12 mm thick plain cement mortar bands in cement mortar 1:4 ( 1 cement : 4 fine sand) :Raised Band
72
-
-
... More
Lettering with black Japan pint of approved brand and manufacture
300
-
-
... More
Fabricating logo name and letters in multi wood of 12mm thick of approved make.
1
-
-
... More
Sub head - Roofing Work
-
-
-
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
9888
-
-
... More
Providing and fixing plain Multipurpose Cement board (High Pressure steam cured) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete (frame work to be paid separately) :6 mm thick cement board
374
-
-
... More
Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately)
495
-
-
... More
Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately ).
65
-
-
... More
Providing and fixing Hysquare UPVC Rain water gutter with 100 mm depth ,160mm width of approved quality and make wih necessary UPVC Clamp at 1m intervels, UPVC Corners,UPVC Corner Drop,End Cap,Center Joint,SS screws etc complete as per the direction of Engineer in charge.
111
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter
6
-
-
... More
Supply and installation of 2mm thick Poly-carbonate sheet roofing of approved make, embossed clear transparent with UV protection coating/treatment and weight not less than 2400 gms/ sqm. It shall be fire retardant and confirming to IS 14443. the rate shall include aluminium leak proofing and fixing management system with EPDM rubber gaskets, silicone sealant etc. complete as required and as per the direction of engineer in charge.
10
-
-
... More
Sub Head - Other External Works
-
-
-
... More
Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
130
-
-
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge)
4
-
-
... More
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
6
-
-
... More
Dismantling the existing paver blocks for ground preparation and stacking useful materials for reuse.
444
-
-
... More
Providing and laying dismantled paver blocks available at site including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
168
-
-
... More
Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In cement mortar
5
-
-
... More
Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar
9
-
-
... More
Cleaning existing old compound wall using high pressure water pump to removing dust and other particles for painting.
88
-
-
... More
Sub head -Horticulture Work
-
-
-
... More
Supply and stacking of Kanikonna (Cassia fistula/Amaltash) plant of height 120-135cm. in big poly bags of size 25 cm as per direction of the officer-in charge - landscaping works
5
-
-
... More
Providing of Areca palm plant, having ht. 1.50 m to 1.80 m with 6 to 8 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot / Plastic pot
5
-
-
... More
Supply and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara, Mohan, Scarlet Queen, Varigata, Glabra Formosa, Peruviana Odissi, Partha, Subhra,Thimma, Spectabilis L.N Birla,Refulgens) plant of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots and as per direction of the officer-in-charge - landscaping works
5
-
-
... More
Supply and stacking of plant Arali / Nerium oleander variegated of height 60-75cm., multibranched in earthen pots of size 25 cm as per direction of the officer-in-charge - landscaping works
5
-
-
... More
Supply and stacking of plant nandyarvattam / Tabernaemontana divaricata (Chandni double) of height 45-60 cm in earthen pots of size 20 cm as per direction of the officer-in-charge - landscaping works
5
-
-
... More
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieablematerials as per direction of officer in charge (excluding cast of plant and water )Cost of plantation per trees plants
65
-
-
... More
Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m. lead complete (cattle manure measured in stacks will reduced by 8% for Payment).
20
-
-
... More
Sub head - Electrical Works - Wiring
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
Group C
110
-
-
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
2
-
-
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.
3 X 1.5 sq.mm
550
-
-
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.
3 x 2.5 sq. Mm
900
-
-
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.
3 x 4 sq. mm
100
-
-
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.
4 x 4 sq. Mm
40
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.
20 mm
850
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.
25 mm
800
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.
32 mm
150
-
-
... More
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.
75 mm X 75 mm X 60 mm deep
4
-
-
... More
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.
100 mm X 100 mm X 60 mm deep
2
-
-
... More
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.
150 mm X 150 mm X 60 mm deep
4
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
5/6 amps switch
55
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
15/16 amp switch
3
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
3 pin 5/6 amp socket outlet
55
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
6 pin 15/16 amp socket outlet
3
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
Telephone socket outlet
14
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
TV antenna socket outlet
4
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
Bell push
1
-
-
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
25
-
-
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
25
-
-
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
1 or 2 Module (75mmX75mm)
5
-
-
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
3 Module (100mmX75mm)
10
-
-
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
4 Module (125mmX75mm)
3
-
-
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
6 Module (200mmX75mm)
10
-
-
... More
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
1 or 2 Module
30
-
-
... More
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
3 Module
15
-
-
... More
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
4 Module
3
-
-
... More
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
6 Module
15
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or inrecess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 ampsmodular switch, connection etc. as required. (For light plugs to be used in non residentialbuildings).
20
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
12
-
-
... More
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.
102
-
-
... More
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.
1
-
-
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standardlength (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc.as required.
15
-
-
... More
Numbering of ceiling fan / exhaust fan/ fluorescent fittings as required.
30
-
-
... More
Installation of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required.
Upto 450 mm sweep
10
-
-
... More
Supplying & fixing suitable size Gl box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. lCD
2
-
-
... More
Supplying and fixing PVC batten/ angle holder including connection etc. as required.
10
-
-
... More
Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the MS box and making good the surface as required.
1
-
-
... More
Sub head - Electrical - Distribution Boards
-
-
-
... More
MSB:;Fabrication, supply, erection, testing and commissioning of Indoor Cubicle Type, dust and vermin proof, floor/Wall mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided. INCOMER :
63A 4P, MCCB 25kA set at 40A with OC,SC,EF Shunt releases with thermal magnetic release -1No. ELR with Core Balanced CT Protection - 1No. 3Phase Multi Function Meter with CTs, CL1, 5-15VA, 75/5A -1Set;
LED Type Red Yellow Blue (RYB), Red Amber Green (Close/Trip/Open) Indication Lamps with Control fuses and toggle switches -1set, BUSBAR : 100 Amp TPN Aluminium Bus 1No,;
Earth bus - 19 x 3mm Copper strip.
OUTGOINGS :
40A 4P MCB, 16 KA - 4No 25A DP MCB, 16 KA - 3No
1
-
-
... More
Energy Meter Cubicle :Fabrication, Supply, Installation, testing & Commissioning of Lockable type energy Meter cubicle made out of 16 SWG CRCA sheet with view glass and consisting of following (Complete with all interconnections and powder coated painting - to be fixed outside the building) :a:Seperate chamber for 3 ph- energy meter ,cutouts etc b..1 no 40/63 A FP isolator /fuse cutouts NOTE;Prepartion of all drawings ,submitting and getting approval ,submitting completion certificates and arranging inspection of DG ,getting sanction and energisation certificates from KSEB,CEI, obtaining electrical connection includes all miscellenious expenses etc for commissioning of the whole installation in thje premises is in contractor scope (All statuatory payment borne by client upon the submission of the receipt)
1
-
-
... More
Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required
6 way (4+18 )double door
2
-
-
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator
2+6 way, Double door
2
-
-
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single pole
36
-
-
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Double pole
2
-
-
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
12
-
-
... More
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
32 amps
2
-
-
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.
25 amps
6
-
-
... More
Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.
1
-
-
... More
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
1
-
-
... More
Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with testing and commissioning etc. as required. 2For 8 way, Double door SPN MCBDB
1
-
-
... More
Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.
For 6 way, Double door TPN MCBDB
2
-
-
... More
Sub head Electrical - Light Fixtures
-
-
-
... More
SITC of 36W (+/-10% tolerance) LED Designer 2x2 luminaire having /= 3000 lm system output (Luminaire lumen output). ANSI rated LEDs from reputed makes should be provided. Luminaire efficacy should be greater than or equal to 80 lumens/watt and with minimum 2 KV surge protection. Wipro / Crompton / Philips Make;Note: Light fixtures complete with all necessary accessories including suspenders, PVC Flexible pipes, adopters, connectors etc as required (Sample shall be approved by the engineer in charge). The installation shall be complete in all respects.
1
-
-
... More
SITC of 18W (+/-10% tolerance) 4ft LED luminaire having /= 1500 lm system output (Luminaire lumen output). ANSI rated LEDs from reputed makes should be provided. Luminaire efficacy should be greater than or equal to 85 lumens/watt and with minimum 2 KV surge protection. Wipro / Crompton / Philips Make
;Note: Light fixtures complete with all necessary accessories including suspenders, PVC Flexible pipes, adopters, connectors etc as required (Sample shall be approved by the engineer in charge). The installation shall be complete in all respects.
50
-
-
... More
SITC of 10W (+/-10% tolerance) 2ft LED luminaire having /= 1500 lm system output (Luminaire lumen output). ANSI rated LEDs from reputed makes should be provided. Luminaire efficacy should be greater than or equal to 85 lumens/watt and with minimum 2 KV surge protection. Wipro / Crompton / Philips Make Note: Light fixtures complete with all necessary accessories including suspenders, PVC Flexible pipes, adopters, connectors etc as required (Sample shall be approved by the engineer in charge). The installation shall be complete in all respects.
4
-
-
... More
SITC of 5W (+/-10% tolerance) LED Bulb with B22 base, acrylic diffuser.Make : Crompton /Philips/ Wipro.
10
-
-
... More
SITC of 7W (+/-10% tolerance) 1 Feet LED Mirror light.;Make: Crompton/Philips/Wipro
10
-
-
... More
SITC of 35W (+/-10% tolerance) LED Flood Light (Area Lighting) with IP66 protection.Wipro / Crompton / Philips Make
4
-
-
... More
SITC of 20W (+/-10% tolerance) LED Gate/Post top light fitting with IP65 Protection, 5kv surge protection ;Wipro / Crompton / Philips Make
2
-
-
... More
Supply of 400mm Sweep Wall Fan with necessary Bracket and Clamps
2
-
-
... More
Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.
1200 mm sweep 5 star rated ceiling fan complete with 300 mm down rod,canopies ,shackles and blades and resistance type regulator working on 230V/240V single phase A/C
25
-
-
... More
Supply of 300 mm sweep Exhaust fan with Metal blades of approved colour, quality and complete the work in good condition as directed by the engineer in charge.
10
-
-
... More
Sub head Electrical - Earthing
-
-
-
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
1
-
-
... More
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providingmasonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required
2
-
-
... More
Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required
3.15mm copper conductor(10 SWG)
80
-
-
... More
Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.
150
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
10
-
-
... More
Sub head - UPS and Diesel Generator
-
-
-
... More
Supply, installation testing and commisioning of online 3KVA UPS with double conversion technology(1ph input & 1 ph output), with suitable SMF batteries for 30min back up. The UPS should possess IP20 protection and having IGBT based rectifier &; inverter, 0.9 power factor, Seperate bypass, rack/tower covertible, transient respones less or equal to+/-8% for 100% nonliner step load (Online mode), crest factor upto 3.1 at full load, Harmonic distortion;5%, Voltage Distortion=3% (for linear load) and =6% (for non linear load), and with LED/LCD indicators showing load status, Battery status, over/under voltages, discharge timer&fault conditions. Rate including supply and fixing battery rack, connecting links etc and with 3 year onsite warranty from the date of installation, complete with all accessories as required.
1
-
-
... More
Diesel Generator set with ATS Panel: Supply, Installation,testing and comissioning of 15KVA three phase 415V 0.8pf 50Hz.Diesel engine driven generator set with standard control panel,accoustic enclosure etc. of the following specification. Diesel Generating set comprising of diesel engine,alternator fuel tank, control panel, remoted switch etc.complete.Diesel engine shall be suitable for continious operation of generator set inclusive of fly wheel, flexible coupling air cleaner, corrosion resistor,fan with guard,fuel pump, fuel filter, electrical starting system with starter, 12/24V battery and battery charger,voltage regulator, instrument panel,KWH meter,rpm indicator,Residual exhaust silencers, protections against low lubrication oil pressure. The engine shall be mounted over a sturdy common base frame. Floor mounted dust and vermin proof, indoor type standard control panel shall be consisting of 63/40A TPN MCCB on generator side,voltmeter 0-500V, 3 ammeters,frequency meter 45-60Hz,range,Suitable CT and indicating lamp with fuse and switch control etc.complete with necessary interconnections, fuses,labels and other accessories including first filling of oil and diesel for commissioning of the DG set.The engine shall be Air cooled. Energy meter & CTs shall be tested and certificate shall be obtained from electrical inspectorate Lab and sanction may be obtained from the electrical inspectorate. The sound level shall be brought down to 60D.B , +/-5 with in a distance of 3mtr. Accoustic insulation material shall bemineral wool/resign bounded fibreglass (with minimum thickness of 50mm). Doors shall be sliding on either sides. Ex. fan of sufficient capacity, tube light etc. shall be provided inside the enclosure. Sufficient fresh air intake and hot air outlet with splitters to be arranged so that the temperature inside should not be increased 5 degree above the ambient temperature. Exhaust pipe inside the enclosure up to and including silencer shall be enclosed with Al. cladding over thermal insulation. ATS Panel shoule be inclusive of DG Pricing and the same is a seperate panel fixed inside the electrical Room.
1
-
-
... More
Supply and fixing of additional length of exhaust pipe of required dimensions up to required height as directed by Engineer in Charge work includes clamping the pipe along the wall with MS channel support of Suitable Size to be provided at regular intervals , Two Coats of Synchromate primer and Two coats of Metallic painting etc. as per the satisfaction and direction by Engineer in Charge.
15
-
-
... More
Sub head - CCTV
-
-
-
... More
Supply Installation Testing &Commissioning of 1080p Dome/Bullet camera with 1/2.8 inch CMOS, Total sensor pixels 1920 x 1080 (2MP), Builtin IR illuminator with min 30m viewing distance, Fully configurable quad streaming, Sensitivity- 0.1 lx,0.0 lx (IR), H.265 &H.264 support, Wide Dynamic range, True day/night, Electronic shutter, BLC, Privacy Masking- Four independent areas, fully programmable, Varifocal lens, 3-axis adjustment (pan/tilt/rotation), Password protection, ONVIF Profile S, IP65, IK08, CE, FCC Certified. The Housing, Mounts, Lens etc should be of same make as of camera offered. using , Connectors, Lens, Camera Mounts, Power Supply and all Ancillary Equipment & all accessories as per technical specification and should be UL /FCC listed. The camera, software should be of the same make for seamless integration with each other as per compliance of specifications.
10
-
-
... More
SITC of 16 channel Network Video Recorder with 2SATA interfaces for 2HDDs with maximum capacity of 6TB HDD each,with 16 no inbuilt POE enabled 16 RJ 45 10/100 Mbps self adaptive ethernet interfaces for camera connectivity , Digital Video Management Software for seamless integration with third party application for unlimited Management server/Recording server/ Client PC for centralized monitoring, recording and video management.
1
-
-
... More
Supply Installation Testing &Commissioning of Managed 24 Port Giga PoE Layer-2 Intelligent Ethernet Switch with 370Watt PoE Power at 802.3 providing 24 x 10/100/1000 Base-T PoE Fast Ethernet ports and with min 2SFP Giga Ports (provision for Fiber Giga connectivity)with the following specifications: PoE Power: 370Watts, Port type / density /architecture:;
a) All ports on the switch should be of nonblocking architecture, b)Switch ports of 24 x 10/100/1000 Base T PoE with additional 2x SFP ports for uplink, 1x Out Of band port for IP based management, 1X Console port.
;c) Switch should be equipped with Variable speed Fan; Switching fabric 56 Gbps and 41.6 MPPS; Should have minimum 256 MB DRAM and 256 MB Flash: Resiliency Support: 1. 802.1D spanning Tree and PVST+, 802.1w, 802.1s, Should have BPDU Guard or equivalent feature complete etc as reqd.
1
-
-
... More
SITC of 6TB Survillance Hard Disk Drive.
1
-
-
... More
SITC 24 inch LED TV Monitor with HDMI Port
1
-
-
... More
Supply and laying charges for HDMI Cable 20Meter Long
1
-
-
... More
Supply and laying charges for HDMI Cable 40Meter Long
1
-
-
... More
Sub head - Networking
-
-
-
... More
Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable
750
-
-
... More
Supplying and Installation of Standard 12U rack with welded frame integrated with side panel / removable side panel and vented top cover with fan mounting provision, associated Front Glass Door with Lock & Key and provision to mount racks on wall. Conforms to DIN 41494 or Equivalent EIA /ISO / EN / CEA Standard, inclusive of cooling fans, Power disrtibution units, 24 port loaded Patch Panels, cable organiser, termination of CAT6 cable etc.............(Exclusive of Network Switches, Rack mounted Servers)
1
-
-
... More
Supply and fixing of CAT 6 RJ 45 Socket with Shutter and termination of CAT 6 UTP Cable as required.
20
-
-
... More
Supply, installation and testing of 24 port L2 Switch, 10/100 Gigabit Base-T Fully managed switch, with 24Nos. RJ-45 of 10/100 Ethernet ports plus four 10/100/100 copper ports and 2Nos SFP slots(shared with 2 Copper ports) for fiber Gigabit Ethernet expansion,12.8-Gbps, non-blocking, store-and-forward switching capacity, Fully rack-mountable using the included rack-mounting hardware.
1
-
-
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.2 Pair
350
-
-
... More
Supply, installation, testing and commisioning of 0.51 dia Tinned Copper 20 pair unarmoured telephone cable.
40
-
-
... More
Providing & Fixing 20Pair Krone module with base frame in the recess / surface made out of 16 SWG sheet steel box, front openable, having locking arrangements duly powder coated, Painted in Siemens Grey colour.including dressing, ferruling and punching of telephone cable with krone tool etc. as required.
1
-
-
... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated,shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed steel/ PVC conduit as required.
110
-
-
... More
Supply Installation Testing commisioning of Digital EPABX equipped with and expandable with Auto attendent 04 Trunks and 16 Extensions,inclusive of master telephones and other acessosories as required for proper functioning of the EPABX system
1
-
-
... More
SITC of Biometric Attendance system (Fingerprint and attendance system) WIFI enabled finger based time and attendence ,no of users maximum are 1000;50,000 transanctions ,which can be stored in the device memory .It can be connected to TCP/IP including power supply unit etc
1
-
-
... More
SITC of Queue Management System consisting of multi function queue ticket printer with touch screen kiosk type display,voice unit and customer identification devices ,high resolution GUI display in multi languages ,supports wireless networks ,durable printer ,supports alpha numeric numbering system ,display unit with 24'' LCD monitor ,with audio speaker arrangement ,HDMI cabling worksation counters with required browser/softwares and inclusive of testing commissioning and training to treasury officers for queue managemnt system by OEM .(Necessory softwares and hardwares required for effective functioining of QMS)
1
-
-
... More
Sub head - Air Conditioning
-
-
-
... More
Providing and fixing hi wall split inverter type Air Condition of 1.0 ton capacity ( above 3star rating ) with cordless remote,inclusive of Pressure Testing, MS Works for fixing outdoor units, Gas Charging(R-410A), Vaccumising, Commissioning of 1.0 ton hi wall split Air Condition ( Indoor and outdoor units ). ( Installation should be done as per company specification )
2
-
-
... More
Sub head - Miscellaneous
-
-
-
... More
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate withinscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixingthe same in ground as required.
2
-
-
... More
Supply&laying of 1.1KV grade 6mm thick rubber mat of 1m wide X 2m long
1
-
-
... More
Supply and providing 2.0kg Dry chemical powder type fire extinguisher with hose and clamps including fixing it to wall as required.
7
-
-
... More
Providing printed instruction chart both in English ; REGIONAL LANGUAGE &duly framed out on glass (A3 Size)for treatment of person suffering from Electric shock.
1
-
-
... More
Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench 63/50 mm or nearest
40
-
-
... More
Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench 120/102.5mm or nearest
20
-
-
... More
Excavation for cable trenches in soft soil, depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 metres.
10
-
-
... More
Excavation of the cable trenches in hard rock not exceeding 1.5 metres in width, and lift upto 1.5 metres, including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 metres.
10
-
-
... More
Filling available excavated earth (excluding rock) in trenches, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 metres.
10
-
-
... More
SITC of Burglar System equipped with the ultramodern microprocessor technology with remote access facility, cellular communicator allows the system to transmit a signal to stored contacts in case of any intrusion or fire, inbuilt siren goes off on sensing a threat, Supports 5 remote controls, 5 wireless sensors and 3 RFID tags, Stores 3 phone numbers, 1 speed-dial number and 1 RFID SMS notification number, SMS alert for low battery of two-way accessories, Built-in loudspeaker for siren and two-way talking
1
-
-
... More
Providing and fixing of Signages as directed by engineer in charge
1
-
-
... More
Sub head - Cabling
-
-
-
... More
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.
4 core 16 sqmm with factory made clamp
70
-
-
... More
Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.
4 core 16 sqmm
75
-
-
... More
Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.32 mm dia G.I pipe ( medium class)
75
-
-
... More
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.
4 core 10 sqmm with factory made clamp
70
-
-
... More
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.
3 core 10 sqmm with factory made clamp
40
-
-
... More
Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Copper conductor cable conforming to IS 7098 (Part 1).;
6C x 1.5 Sq mm
150
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. mm
105
-
-
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
45
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
4 X 10 sq. mm (25mm)
4
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
4 X 16 sq. mm (28mm)
6
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
3 X 10 sq. mm (22mm)
8
-
-
... More
Supplying and making end termination with brass compression gland and Copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.;
6c X 1.5 sq. mm
2
-
-
... More
Sub head - Sanitary Fixtures, Bath Fittings and Accessories
-
-
-
... More
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre /8 litres), including seat cover, and cistern fittings, nuts bolts and gasket etc complete.
5
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
2
-
-
... More
Providing, fixing, testing, and commissioning at site Disabled Toilet, Complete Set, including White Floor Mounted Water Closet, Suitable standard flushing cistern with internal fittings, Lid, Antimicrobial Soft close Seat Cover etc, Wash basin, Half Pedestal for wash basin, Clinical Single Lever Basin Pillar tap and with 1 Set of Hinged hand rail 750mm. long, 2 Set of Grab Rail, each of 600mm. long, and with all necessary accessories and fixed with Brackets Expansion/ Rawl Sleeves, Stainless Steel/ Brass Bolts/Screws, Nuts, Washers etc, including cutting and making good the walls and floors wherever required. including, all as per manufacturer's instruction and to the approval of Engineer-in-charge. CERA CRUSE set or Equivalent.
1
-
-
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.
2
-
-
... More
Providing and fixing Urinal Valve Auto Closing System with Built in Control Cock & Wall flange. JAQUAR - PRS-077 or Equivalent
2
-
-
... More
Supplying, installing, testing & commissioning at site in position Division / partition wall of size 90x320x720mm between the urinals of approved shade including fixing the same to the wall with all necessary accessories as per the directions of Engineer in charge. CERA CORVIN or Equivalent.
1
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x400mm with single 15 mm C.P.brasspillar taps
8
-
-
... More
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
8
-
-
... More
Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 893115 mm nominal bore
2
-
-
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:100 mm diameter
2
-
-
... More
Providing and fixing CP Brass 32mm size Bottle trap of approved quality & make and as per the direction of Engineer in charge.
8
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) Kitchen Sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, waste coupling including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board.510x1040 mm bowl depth 200 mm DIAMOND REK 4120 or Equivalent
2
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) Kitchen Sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, waste coupling including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with out board & 610x510 mm bowl depth 200 mm DIAMOND REK 2420 (BO) or Equivalent
1
-
-
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore
7
-
-
... More
Supplying, installing, testing & commissioning at site in position Kitchen Sink Cock, Wall Mounted Type 15mm. nominal bore, overall dimensions: 208x237mm, and all necessary accessories, all as per manufacturer's instruction and to the approval of the Engineer-in-charge.
3
-
-
... More
Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
6
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore
24
-
-
... More
Supplying, installing, testing & commissioning at site in position Heavy Duty Flexible Braided Connectors, 15mm. nominal bore, 450mm. Long with higher thermal stability for cold and hot water, for Wash Basin Kitchen Sink Mixer and Geyser points, of approved quality
26
-
-
... More
C. P. Robe Hook, 60mm. Dia. x 45mm. High. JAQUAR ACN-1191N or Equivalent
8
-
-
... More
Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
5
-
-
... More
Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
5
-
-
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
8
-
-
... More
Supplying, installing, testing & commissioning at site in position 15 lph below counter RO Water Purifier Consisting of 7 litre storage capacity, Booster pump, Sediment, Carbon Block filter, UF & Post Carbon Cartridge complete in all respects.
1
-
-
... More
Providing and Fixing uPVC Floor Traps with deep seal including all inlet and outlet connections to pipes using solvent cement, complete. Multi Inlet Trap 110 x 75 x 50mm size x 178mm. Deep.
13
-
-
... More
Providing and Fixing Heavy Duty Stainless Steel Cockroach Trap Stainless Steel A ISI 304 with 153x153mm. Grating, for 110mm. Floor Traps.
12
-
-
... More
Providing and Fixing Heavy Duty Stainless Steel Cover, Stainless Steel A ISI 304 with 153x153mm. Grating, for 110mm. Concealed Floor Traps.
1
-
-
... More
Providing and Fixing Floor Clean Out Cover with Heavy Duty, Stainless Steel, Stainless Steel A ISI 304 sealed, threaded covers, with 153x153mm. including suitable keys for opening, if required.
4
-
-
... More
Sub head - Soil, Waste, Vent and Rain Water Systems Pipe work
-
-
-
... More
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 40 mm pipe 6Kgf/cm2
16
-
-
... More
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2
14
-
-
... More
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 6 Kgf/cm2
20
-
-
... More
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2
20
-
-
... More
Providing, Fixing, testing and commissioning at site in position uPVC pipe(SWR-Type A) (IS:13592) or ( IS : 4985 ) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, coupling, etc. complete.(For Rain water pipes above porch and vent pipes)75 mm O.D type A
144
-
-
... More
Providing, Fixing, testing and commissioning at site in position uPVC pipe (SWR-Type B) (IS:13592) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, coupling, door bends, junctions, cowls, etc., complete. (In Shaft & Ceiling) - In shaft 75 mm O.D.(SWR Type-B- IS-13592)
32
-
-
... More
Providing, Fixing, testing and commissioning at site in position uPVC pipe (SWR-Type B) (IS:13592) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, coupling, door bends, junctions, cowls, etc., complete. (In Shaft & Ceiling) - In shaft 110 mm O.D. (SWR Type-B- IS- 13592)
37
-
-
... More
Making holes in RCC beams, slabs floors etc, using core cutting machine, for laying pipes with standard clearance and rendering the same in RCC M 20, including nominal reinforcement wherever required, complete.The quoted rate shall also include water proofing compound(Conbextra GP-2 / GP-10) for complete sealing the same joints around the pipes for full depth etc to the satisfaction of the Project Manager including supply of all materials. RCC slabs (For Wash Basin, EWC & Floor Trap) 200 mm thick - 50mm dia.
6
-
-
... More
Making holes in RCC beams, slabs floors etc, using core cutting machine, for laying pipes with standard clearance and rendering the same in RCC M 20, including nominal reinforcement wherever required, complete.The quoted rate shall also include water proofing compound(Conbextra GP-2 / GP-10) for complete sealing the same joints around the pipes for full depth etc to the satisfaction of the Project Manager including supply of all materials. RCC slabs (For Wash Basin, EWC & Floor Trap) 200 mm thick - 75mm dia.
2
-
-
... More
Making holes in RCC beams, slabs floors etc, using core cutting machine, for laying pipes with standard clearance and rendering the same in RCC M 20, including nominal reinforcement wherever required, complete.The quoted rate shall also include water proofing compound(Conbextra GP-2 / GP-10) for complete sealing the same joints around the pipes for full depth etc to the satisfaction of the Project Manager including supply of all materials. RCC slabs (For Wash Basin, EWC & Floor Trap) 200 mm thick - 110mm dia.
8
-
-
... More
Providing, Fixing, testing and commissioning at site GI Slotted Rail Brackets, hangers, supports including drilling holes to fix the pipe clamps, as per detailed drawing for supporting soil, waste rain water pipes & water supply pipes in shaft and ceiling with suitable GI clamps, bolts, threaded rods, anchor bolts nuts & washers fixed on shaft walls/outer walls etc. The quoted rate shall include with the cost of brackets galvanized with zinc alloy of 1.6mm thick conforming to IS 1239 etc., complete as directed by the employer.(Hitech Supports/ Equivalent)
15
-
-
... More
Sub head - Water Supply System
-
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall 20 mm nominal outer dia pipes
35
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm nominal outer dia pipes
62
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall 25 mm nominal outer dia pipes
24
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall 32 mm nominal outer dia pipes
30
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall 40 mm nominal outer dia pipes
30
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall 50 mm nominal outer dia pipes
8
-
-
... More
Providing, Fixing at site in position uPVC Pipes (as per ASTM D 1785 sch-80 ) of approved make for Pumping line from ( Sump to Over head Tank ) complete with all necessary (ASTM D 1785) fittings (elbows, unions, tees, reducers, couplings, nipples etc) 32 mm nominal outer dia pipes.
40
-
-
... More
Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work32 mm dia nominal bore
100
-
-
... More
Supply, fix at site in position, test and commission, Forged Brass Ball Valves. PN;25, complete with all necessary accessories. 20mm. (¾")
12
-
-
... More
Supply, fix at site in position, test and commission, Forged Brass Ball Valves. PN;25, complete with all necessary accessories. 25mm. (1")
4
-
-
... More
Supply, fix at site in position, test and commission, Forged Brass Ball Valves. PN;25, complete with all necessary accessories. 32mm. (1¼")
2
-
-
... More
Supply, fix at site in position, test and commission, Forged Brass Ball Valves. PN;25, complete with all necessary accessories. 40mm.(1½")
2
-
-
... More
Supply, fix at site in position, test and commission, Forged Brass Ball Valves. PN;25, complete with all necessary accessories. 50mm. (2")
1
-
-
... More
Sub head - External Sewarage
-
-
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia
100
-
-
... More
Supplying & Laying of pipes and conveying to position; cleaning, laying and jointing to true lines and gradients, uPVC pipe of IS 4985(6kg/cm2) including jointing the pipe as per specification, testing the pipe line after installation all per provisions of IS: 1742-1983 (Code of practice for building drainage) complete (excluding earth work). 110 mm O.D.
20
-
-
... More
Supplying & Laying of pipes and conveying to position; cleaning, laying and jointing to true lines and gradients, uPVC pipe of IS 4985(6kg/cm2) including jointing the pipe as per specification, testing the pipe line after installation all per provisions of IS: 1742-1983 (Code of practice for building drainage) complete (excluding earth work))160 mm nominal outer dia pipes
100
-
-
... More
Cement concrete 1:5:10 (I cement 5 sand and 10 broken stones) encasing using 20 mm granite broken stones and fine sand for concreting horizontal pipes in the trenches, hire and labour charges for form work ,watering for curing etc complete as per the satisfaction of the Project Manager including cost of all materials.
8
-
-
... More
Supplying and fixing C.I. cover with frame for manholes : 455x610mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 38 kg - for septic tank and UG tank
6
-
-
... More
Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl
4
-
-
... More
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Vent cowl
12
-
-
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weigh of cover 23 kg and weight of frame 15 kg):With Sewer bricks conforming to IS : 4885
12
-
-
... More
Extra for depth for manholesSize 90x80 cmWith Sewer bricks conforming to IS : 4885
6
-
-
... More
Providing and fixing square-mouth PVC gully trap PN-06 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:150 x 100 mm size P type With sewer bricks conforming to IS : 4885
6
-
-
... More
Constructing soak pit 1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
1
-
-
... More
Sub head - Pump and Accessories
-
-
-
... More
Providing and fixing rectangular high density polyethylene water storageloft tank with cover, conforming to ISI : 12701, colour of opaque white or asapproved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures fortank shall be paid separately.
1000
-
-
... More
Drilling of 200mm dia Tubewell to the required depth - for Tube well Conducting Hydro Geological & Geo Physical investigation.
1
-
-
... More
Boring / drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in IS: 2800 ( part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools plants & machineries required for the job, all complete as per direction of Engineer - in- Charge, upto 90 metre depth below ground level.All types of soil 400 mm dia
80
-
-
... More
Boring / drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in IS: 2800 ( part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools plants & machineries required for the job, all complete as per direction of Engineer - in- Charge, upto 90 metre depth below ground level.Rocky strata including Boulders 400 mm dia
10
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS : 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer- in- Charge.200 mm nominal size dia
60
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer - in-charge 200 mm nominal size dia
20
-
-
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer -in- charges
6
-
-
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit,over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer -in-Charge
6
-
-
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer-in-charge.
3
-
-
... More
Providing and fixing M.S. clamp of required dia to the top of casing / housing pipe of tubewell as per IS : 2800 ( part I), including ecessary bolts & nuts of required size complete.200 mm clamp
1
-
-
... More
Providing, fixing, erecting,testing and commissioning Bore well pump of approved make (CRI or equivalent ) and required capacity, Three phase capable of discharging 30 lpm against the specified head including all accessories such as starter, switch board, 4 sq. mm flat cable(nominal length up to 15.00 meters) from the motor inside the well up to starter (all approved brands as specified by the Engineer in charge) - pump for bore well
3.75
-
-
... More
Development of tube well in accordance with IS: 2800 (Part I) and IS : 1189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc.by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tube well, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer - in-charge.
6
-
-
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia
1
-
-
... More
Providing, fixing, Erecting testing and commissioning of 1 HP single phase Centrifugal Pump set of approved make ( Kirloskar or equivalent ) having 33 lpm against a total head of 15 metres including all accessories such as starter, switch board, 2.5 mm2 PVC sheathed copper core cable from starter to the motor, required length of PVC suction pipe, foot valve,etc. complete - for sump
1
-
-
... More
Providing and fixing Bail plug / Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS : 2800 (part I).200 mm dia
1
-
-
... More
Supplying, providing and laying additional length of cable, 4 sq. mm, 3 core flat cable for connecting the pump to starter including all sundries.
100
-
-
... More
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10Kgf/cm2 - External work - Exposed on wall
10
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements