INKEL Limited Tender

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete:125x85x5.5 mm (heavy type)

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:250x10 mm

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:100x10 mm

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

Providing and fixing plain lining with necessary screws/nuts, bolts/ nails, including a coat of approved primer on one face, and fixed on wooden frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately). 19mm thick composite coir board with approved brand.

Providing and fixing teak veneer on the 19 mm thick composite coir board one side conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws on unexposed surface with teak veneer facings of approved manufacture (Composite Coir Board to be paid separately).

Providing and fixing composite coir board 19 mm thick of approved brand jointed in dovetail pattern with necessary teak wood reapers and and teak wood plugs as per drawing /as specified by the Architect/Engineer-in-charge .Rate shall include cost of fixing into the masonry/concrete wall with necessary screws,cost and conveyance of all materials,labour charges,lead,lift etc complete at all levels (Cost of teak wood reaper shall be paid extra) & Internal Partitions(19mm+125mm+19mm)

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately). 12 mm thick composite coir board with approved brand.

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-incharge (Frame work shall be paid for separately). 6mm thick marine ply

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately). 6 mm thick composite coir board with approved brand.

Providing second quality teak wood planks of required size after cutting, shaping,making lap joint and providing the same in position including cost of all materials as directed by Engineer in charge (25 mm to 40 mm thick)

Providing second quality teak wood frames of required size after cutting, shaping,making lap joint and providing the same in position including cost of all materials as directed by Engineer in charge

Fixing wooden furniture using second class teak wood as per drawings using necessary hardware, etc. The rate is including cost and conveyance of all materials, lead, lift etc complete at all levels as directed by the Engineer in Charge(Second class teak to be paid separately) Bench 1800x450x450mm

Fixing wooden furniture using second class teak wood as per drawings using necessary hardware, etc. The rate is including cost and conveyance of all materials, lead, lift etc complete at all levels as directed by the Engineer in Charge(Second class teak to be paid separately) Chair 650x650x900mm

Fixing wooden furniture using second class teak wood as per drawings using necessary hardware, etc. The rate is including cost and conveyance of all materials, lead, lift etc complete at all levels as directed by the Engineer in Charge(Second class teak to be paid separately) Table 1200x1200x750mm

Fixing wooden furniture using second class teak wood as per drawings using necessary hardware, etc. The rate is including cost and conveyance of all materials, lead, lift etc complete at all levels as directed by the Engineer in Charge(Second class teak to be paid separately) Table 1500x900x750mm

Providing and fixing of calcium silicate board on the timber ceiling for fixing spot light with timber beading size of 25x25mm and applying two coats of emulsion paint over priming coat along with required hardwares, joint tape etc., as directed by the Engineer in Charge

Providing and fixing the photo frame made of 18-20mm wide x 13-15 mm thick fibre / Plastic moulding frame of jet black colour with matte finish, 3 mm thick card board backing openable from rear, 2.5 mm thick glass and accessories complete as directed by the Engineer in Charge at all levels.(Photo printing will be paid separately)

Providing ultra violet high quality printout in black /white/colour of texts, photographs etc on Vinyl 1200 DPI with laminated matt finish on 6mm marine plywood as per drawing and as directed by the Engineer in Charge at all levels. (Plywood will be paid separately)

Providing ink jet high quality printout in black & white/colour of texts, photographs etc on glossy paper 1200 DPI (HP or equivalent) with laminated matt finish to be fixed on marine plywood (6mm thickness) as per drawing and as directed by the Engineer in Charge at all levels.(Plywood will be paid separately)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:Float glass panes - 4 mm thick glass pane

Providing and fixing composite coir board 19 mm thick with making a holes for fixing the spot light with necessary screws, including painted ms chain for hanging the board from ceiling approved manufacture.

Providing and fixing wooden cornice of size 100x25mm using second class teak wood as per drawings with necessary moulding as per drawing to the sides of exhibit cabinets using necessary SS screws etc materials ,lead,lift etc complete at all levels

Providing and fixing second quality teak wood plank of required size in window sill after cutting, shaping,making lap joint and providing the same in position including cost of all materials as directed by Engineer in charge. Timber plank 25mm thick

Painting board surfaces with ready mix plastic emulsion paint of approved quality two or more coats including cost and conveyance of all materials to site, labour charges, lead, lift etc., complete as directed by the Engineer-in-charge.

Providing and fixing second quality teak wood reepers of required size after cutting, shaping,making Columb/special lap joint and providing the same in position including cost of all materials as directed by Engineer in charge

Supplying and fixing the Roller blind system of Hunter Douglas make or equivalent ,consisting of 38mm OD extruded out of Aluminium alloy 6063 T6 with silver anodized to provide aneverlasting finish and luster, the rotary unit shall be 36mm in OD incorporating a clutch mechanism composed of low & flexing braided polyster cord with nylon core, Control Ball chain shall be composed of braided nylon cord (2mm dia) with high engineering grade plastic beads of 4.5mm diameter mounted co-axially on the cord with a pitch of 6.2mm (C-T-C) Bottom rail should be powder coated steel with 12mm OD with 180 gm to finish it from the will be at the tube. The return end cap bracket shall incorporate snap spring design to facilitate easy installation and removal for maintenance activities. The bracket shall be finished with a flush mounting cover on each side providing an aesthetic finish. It should handle up to 6 Kgs of material. The clutch should mount flush to the face of the bracket which minimize the light gap between the shade and the window frame. Rate shall include cost and conveyance of all materials to site,labour charges etc. Sample to be got approved by the Architect.(Blind Specification-Composition Polyster 22% PVC 78%, Thickness 0.68mm, UV Resistance Min 3, Enivronment- Free of Harmful Substances, Openess Factor 5%, Pattern Twill (Shade-optima /linen -linen)

Extra for cutting and making holes on the coir board lining/partition for fixing TV, Speaker, etc. as per the direction of Engineer in Charge

Applying sealer compound after Preparing the surface/cracks with suitable wooden fillets after cleaning and smoothing the surface and grooves with special chisel/tools applying 1 or more coat of wooden filler diluted in special thinner.Entire surface will be sand papering smooth manually without disturbing the wooden carving details.Then Apply second coat of wooden filler and sand papering smoothly.Then the entire surface will be applied with two or more coat of sealer compound