INKEL Limited Tender

9.5.1.2 : Providing and fixing panelled or panelled and glazed shutters for shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer - in-charge.Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class teak wood 30 mm thick shutters

9.7.1 : Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:Second class teak wood

9.7.7.1 : Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:Float glass panes4 mm thick glass pane

Providing and fixing glazed external partitions using Float glass sheet of nominal thickness 5.5 mm (weight not less than 13.50 Kg/ sqm) in the wooden frames.(frames shall be measured separately)

Providing wood work in rectangular shaped frames of size 100 mm x 75 mm for external glazing, fixed in position with hold fast lugs or with dash fasteners and all other necessary fittings of required dia & length, with wooden polishing. Second class teak wood

9.72.1 : Providing and fixing bright finished brass butt hinges with necessary screws etc. complete:125x85x5.5 mm (heavy type)

9.72.5 : Providing and fixing bright finished brass butt hinges with necessary screws etc. complete:75x65x4 mm (heavy type)

9.74.4 : Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:100x10 mm

9.74.1 : Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:250x10 mm

14.35.4 : Providing and fixing finished brass hard drawn hooks and eyes:150 mm

9.81.2 : Providing and fixing bright finished brass handles with screws etc. complete:100 mm

9.76 : Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Supplying, drilling/cleaning hole and fixing appropriate length of ETA Approved HRD anchor suitable for fastenings on concrete & masonry wall. Anchor should comprise of Polyamide PA 6 grade sleeve and double threaded 6.8 grade countersunk head double threaded screw made of carbon steel galvanized to minimum 5 microns. Insulation foams should be used to fill the gaps between frame & base material. Fixing methodology to be followed as per manufacturers guidelines. All work as per the direction of Engineer in charge

Providing and fixing second quality teak wood reepers of required size after cutting, shaping,making Columb/special lap joint and providing the same in position including cost of all materials as directed by Engineer in charge

Providing Exterior wall partition which includes MS Square tube wall frame system of the frame (size 45x45 mm)fixing at 4feet x 2feet size and 12 mm Fiber cement on both side of the framework, with 25 mm Fiber cement screw at 300 mm centers, and overall thickness 75 mm. The joints of the Fiber cement board to be filled with Fiber cement board jointing compound.

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

9.135.1 : Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.50 mm all complete.With 2nd class teak wood beading 62x19 mm

10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

Providing and fixing wooden cornice of size 110x25mm using second class teak wood as per drawings with necessary moulding as per drawing to the sides of exhibit cabinets using necessary SS screws etc materials ,lead,lift etc complete at all levels

Providing and fixing Marine Plywood 19mm thick ,conforming to IS: 710,of approved brand jointed in dovetail pattern with necessary teak wood reapers and and teak wood plugs as per drawing /as specified by the Architect/Engineer-in-charge .Rate shall include cost of fixing into the masonry/concrete wall with necessary screws,cost and conveyance of all materials,labour charges,lead,lift etc complete at all levels (Cost of teak wood reaper shall be paid extra) Internal Partitions

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a<br>coat of approved primer on one face, and fixed on wooden frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately). 19mm Plywood : 710 grade with approved brand.

Providing and fixing teak veneer on the 19 mm thick Marine plywood one side conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with teak veneer facings of approved manufacture(Marine ply to be paid separately).

Providing and fixing d 19 mm thick Marine plywood with holes for fixing the spot light with necessary screws, including painted ms chain for hanging the board from ceiling approved manufacture.

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a<br>coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately). 12mm thick marine ply conforming to IS : 710 BWR type

Providing and fixing plain lining with necessary screws/nuts bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-incharge (Frame work shall be paid for separately). 6mm thick marine ply

Labour charges for Making rebates and fixing louvers including cost and conveyance of all machinery , labour charges etc complete.

Painting board surfaces with ready mix plastic emulsion paint of approved quality two or more coats after finishing with the putty and joint tape including cost and conveyance of all materials to site, labour charges, lead, lift etc., complete as directed by the Engineer-in-charge.

Providing second quality teak wood frames of required size after cutting, shaping,making lap joint and providing the same in position including cost of all materials as directed by Engineer in charge

Providing second quality teak wood planks of required size after cutting, shaping,making lap joint and providing the same in position including cost of all materials as directed by Engineer in charge (25 mm to 40 mm thick)

Fixing wooden furniture using second class teak wood as per drawings using necessary hardware, etc. The rate is including cost and conveyance of all materials, lead, lift etc complete at all levels as directed by the Engineer in Charge(Second class teak to be paid separately) Bench 1800x450x450mm

Fixing wooden furniture using second class teak wood as per drawings using necessary hardware, etc. The rate is including cost and conveyance of all materials, lead, lift etc complete at all levels as directed by the Engineer in Charge(Second class teak to be paid separately) Table 1200x1200x750mm

Fixing wooden furniture using second class teak wood as per drawings using necessary hardware, etc. The rate is including cost and conveyance of all materials, lead, lift etc complete at all levels as directed by the Engineer in Charge(Second class teak to be paid separately) Chair 650x650x900mm

Fixing wooden furniture using second class teak wood as per drawings using necessary hardware, etc. The rate is including cost and conveyance of all materials, lead, lift etc complete at all levels as directed by the Engineer in Charge(Second class teak to be paid separately) Table 1500x900x750mm

Providing and fixing of calcium silicate board on the timber ceiling for fixing spot light with timber beading size of 25x25mm and applying two coats of emulsion paint over priming coat along with required hardwares, joint tape etc., as directed by the Engineer in Charge

Providing and fixing the photo frame made of 18-20mm wide x 13-15 mm thick fibre / Plastic moulding frame of jet black colour with matte finish, 3 mm thick card board backing openable from rear, 2.5 mm thick glass and accessories complete as directed by the Engineer in Charge at all levels.(Photo printing will be paid separately)

Applying sealer compound after Preparing the surface/cracks with suitable wooden fillets after cleaning and smoothing the surface and grooves with special chisel/tools applying 1 or more coat of wooden filler diluted in special thinner.Entire surface will be sand papering smooth manually without disturbing the wooden carving details.Then Apply second coat of wooden filler and sand papering smoothly.Then the entire surface will be applied with two or more coat of sealer compound

Providing and fixing second quality teak wood plank of required size in window sill after cutting, shaping,making lap joint and providing the same in position including cost of all materials as directed by Engineer in charge. Timber plank 25mm thick

Supplying and fixing the Roller blind system of Hunter Douglas make or equivalent ,consisting of 38mm OD extruded out of Aluminium alloy 6063 T6 with silver anodized to provide aneverlasting finish and luster, the rotary unit shall be 36mm in OD incorporating a clutch mechanism composed of low – flexing braided polyster cord with nylon core, Control Ball chain shall be composed of braided nylon cord (2mm dia) with high engineering grade plastic beads of 4.5mm diameter mounted co-axially on the cord with a pitch of 6.2mm (C-T-C) Bottom rail should be powder coated steel with 12mm OD with 180 gm to finish it from the will be at the tube. The return end cap bracket shall incorporate snap spring design to facilitate easy installation and removal for maintenance activities. The bracket shall be finished with a flush mounting cover on each side providing an aesthetic finish. It should handle up to 6 Kgs of material. The clutch should mount flush to the face of the bracket which minimize the light gap between the shade and the window frame. Rate shall include cost and conveyance of all materials to site,labour charges etc. Sample to be got approved by the Architect.(Blind Specification-Composition Polyster 22% PVC 78%, Thickness 0.68mm, UV Resistance Min 3, Enivronment- Free of Harmful Substances, Openess Factor 5%, Pattern Twill (Shade-optima /linen -linen)

Extra for cutting and making holes on the Marine Plywood /partition for fixing TV, Speaker, etc. as per the direction of Engineer in Charge